commit f8ebb3ac88 upstream.
This patch corrects packet receiving in ax88179_rx_fixup.
- problem observed:
ifconfig shows allways a lot of 'RX Errors' while packets
are received normally.
This occurs because ax88179_rx_fixup does not recognise properly
the usb urb received.
The packets are normally processed and at the end, the code exits
with 'return 0', generating RX Errors.
(pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify
another packet there)
This is a usb urb received by "tcpdump -i usbmon2 -X" on a
little-endian CPU:
0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
^ packet 1 start (pkt_len = 0x05ec)
^^^^ IP alignment pseudo header
^ ethernet packet start
last byte ethernet packet v
padding (8-bytes aligned) vvvv vvvv
0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811
0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 2
0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
...
0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0
...
0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0
...
0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0
...
0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 7
0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a
0x2130: f032 e093 7489 0740 3008 ec05 0000 0080
====1==== ====2====
hdr_off ^
pkt_len = 0x05ec ^^^^
AX_RXHDR_*=0x00830 ^^^^ ^
pkt_len = 0 ^^^^
AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^
0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080
0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080
0x2160: 3008 5803 0000 0080 3008 c800 0000 0080
===11==== ===12==== ===13==== ===14====
0x2170: 0000 0000 0e00 3821
^^^^ ^^^^ rx_hdr
^^^^ pkt_cnt=14
^^^^ hdr_off=0x2138
^^^^ ^^^^ padding
The dump shows that pkt_cnt is the number of entrys in the
per-packet metadata. It is "2 * packet count".
Each packet have two entrys. The first have a valid
value (pkt_len and AX_RXHDR_*) and the second have a
dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR).
Why exists dummy-header for each packet?!?
My guess is that this was done probably to align the
entry for each packet to 64-bits and maintain compatibility
with old firmware.
There is also a padding (0x00000000) before the rx_hdr to
align the end of rx_hdr to 64-bit.
Note that packets have a alignment of 64-bits (8-bytes).
This patch assumes that the dummy-header and the last
padding are optional. So it preserves semantics and
recognises the same valid packets as the current code.
This patch was made using only the dumpfile information and
tested with only one device:
0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Fixes: 57bc3d3ae8 ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup")
Fixes: e2ca90c276 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cc02ede69 upstream.
There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry()
and rose_idletimer_expiry(). The root cause is that del_timer()
could not stop the timer handler that is running and the refcount
of sock is not managed properly.
One of the UAF bugs is shown below:
(thread 1) | (thread 2)
| rose_bind
| rose_connect
| rose_start_heartbeat
rose_release | (wait a time)
case ROSE_STATE_0 |
rose_destroy_socket | rose_heartbeat_expiry
rose_stop_heartbeat |
sock_put(sk) | ...
sock_put(sk) // FREE |
| bh_lock_sock(sk) // USE
The sock is deallocated by sock_put() in rose_release() and
then used by bh_lock_sock() in rose_heartbeat_expiry().
Although rose_destroy_socket() calls rose_stop_heartbeat(),
it could not stop the timer that is running.
The KASAN report triggered by POC is shown below:
BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110
Write of size 4 at addr ffff88800ae59098 by task swapper/3/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0xbf/0xee
print_address_description+0x7b/0x440
print_report+0x101/0x230
? irq_work_single+0xbb/0x140
? _raw_spin_lock+0x5a/0x110
kasan_report+0xed/0x120
? _raw_spin_lock+0x5a/0x110
kasan_check_range+0x2bd/0x2e0
_raw_spin_lock+0x5a/0x110
rose_heartbeat_expiry+0x39/0x370
? rose_start_heartbeat+0xb0/0xb0
call_timer_fn+0x2d/0x1c0
? rose_start_heartbeat+0xb0/0xb0
expire_timers+0x1f3/0x320
__run_timers+0x3ff/0x4d0
run_timer_softirq+0x41/0x80
__do_softirq+0x233/0x544
irq_exit_rcu+0x41/0xa0
sysvec_apic_timer_interrupt+0x8c/0xb0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1b/0x20
RIP: 0010:default_idle+0xb/0x10
RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202
RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae
RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180
RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46
R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000
R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000
...
Allocated by task 146:
__kasan_kmalloc+0xc4/0xf0
sk_prot_alloc+0xdd/0x1a0
sk_alloc+0x2d/0x4e0
rose_create+0x7b/0x330
__sock_create+0x2dd/0x640
__sys_socket+0xc7/0x270
__x64_sys_socket+0x71/0x80
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 152:
kasan_set_track+0x4c/0x70
kasan_set_free_info+0x1f/0x40
____kasan_slab_free+0x124/0x190
kfree+0xd3/0x270
__sk_destruct+0x314/0x460
rose_release+0x2fa/0x3b0
sock_close+0xcb/0x230
__fput+0x2d9/0x650
task_work_run+0xd6/0x160
exit_to_user_mode_loop+0xc7/0xd0
exit_to_user_mode_prepare+0x4e/0x80
syscall_exit_to_user_mode+0x20/0x40
do_syscall_64+0x4f/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This patch adds refcount of sock when we use functions
such as rose_start_heartbeat() and so on to start timer,
and decreases the refcount of sock when timer is finished
or deleted by functions such as rose_stop_heartbeat()
and so on. As a result, the UAF bugs could be mitigated.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220629002640.5693-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a23dd544de upstream.
Looks like there are still cases when "space_left - frag1bytes" can
legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains
within the current encode buffer.
Reported-by: Bruce Fields <bfields@fieldses.org>
Reported-by: Zorro Lang <zlang@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216151
Fixes: 6c254bf3b6 ("SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4f7440030 upstream.
s390x appears to present two RNG interfaces:
- a "TRNG" that gathers entropy using some hardware function; and
- a "DRBG" that takes in a seed and expands it.
Previously, the TRNG was wired up to arch_get_random_{long,int}(), but
it was observed that this was being called really frequently, resulting
in high overhead. So it was changed to be wired up to arch_get_random_
seed_{long,int}(), which was a reasonable decision. Later on, the DRBG
was then wired up to arch_get_random_{long,int}(), with a complicated
buffer filling thread, to control overhead and rate.
Fortunately, none of the performance issues matter much now. The RNG
always attempts to use arch_get_random_seed_{long,int}() first, which
means a complicated implementation of arch_get_random_{long,int}() isn't
really valuable or useful to have around. And it's only used when
reseeding, which means it won't hit the high throughput complications
that were faced before.
So this commit returns to an earlier design of just calling the TRNG in
arch_get_random_seed_{long,int}(), and returning false in arch_get_
random_{long,int}().
Part of what makes the simplification possible is that the RNG now seeds
itself using the TRNG at bootup. But this only works if the TRNG is
detected early in boot, before random_init() is called. So this commit
also causes that check to happen in setup_arch().
Cc: stable@vger.kernel.org
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Ingo Franzki <ifranzki@linux.ibm.com>
Cc: Juergen Christ <jchrist@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 617b365872 upstream.
There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 332bd07787 upstream.
On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.
In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)
When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.
Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().
The out-of-bounds memory accesses was discovered using KASAN.
This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b21bd5a4b1 upstream.
Trying to build a .c file that includes <linux/bpf_perf_event.h>:
$ cat test_bpf_headers.c
#include <linux/bpf_perf_event.h>
throws the below error:
/usr/include/linux/bpf_perf_event.h:14:28: error: field ‘regs’ has incomplete type
14 | bpf_user_pt_regs_t regs;
| ^~~~
This is because we typedef bpf_user_pt_regs_t to 'struct user_pt_regs'
in arch/powerpc/include/uaps/asm/bpf_perf_event.h, but 'struct
user_pt_regs' is not exposed to userspace.
Powerpc has both pt_regs and user_pt_regs structures. However, unlike
arm64 and s390, we expose user_pt_regs to userspace as just 'pt_regs'.
As such, we should typedef bpf_user_pt_regs_t to 'struct pt_regs' for
userspace.
Within the kernel though, we want to typedef bpf_user_pt_regs_t to
'struct user_pt_regs'.
Remove arch/powerpc/include/uapi/asm/bpf_perf_event.h so that the
uapi/asm-generic version of the header is exposed to userspace.
Introduce arch/powerpc/include/asm/bpf_perf_event.h so that we can
typedef bpf_user_pt_regs_t to 'struct user_pt_regs' for use within the
kernel.
Note that this was not showing up with the bpf selftest build since
tools/include/uapi/asm/bpf_perf_event.h didn't include the powerpc
variant.
Fixes: a6460b03f9 ("powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Use typical naming for header include guard]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627191119.142867-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9864816180 upstream.
Commit 2fb4706057 ("powerpc: add support for folded p4d page tables")
erroneously changed PUD setup to a mix of PMD and PUD. Fix it.
While at it, use PTE_TABLE_SIZE instead of PAGE_SIZE for PTE tables
in order to avoid any confusion.
Fixes: 2fb4706057 ("powerpc: add support for folded p4d page tables")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/95ddfd6176d53e6c85e13bd1c358359daa56775f.1655974558.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6886da5f49 upstream.
When searching for config options, use the KCONFIG_CONFIG shell variable
so that builds using non-standard config locations work.
Fixes: 26deb04342 ("powerpc: prepare string/mem functions for KASAN")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220624011745.4060795-1-Liam.Howlett@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef9102004a upstream.
nvdimm_clear_badblocks_region() validates badblock clearing requests
against the span of the region, however it compares the inclusive
badblock request range to the exclusive region range. Fix up the
off-by-one error.
Fixes: 23f4984483 ("libnvdimm: rework region badblocks clearing")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ye <chris.ye@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/165404219489.2445897.9792886413715690399.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1c70d7934 upstream.
ADATA IM2P33F8ABR1 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.
Co-developed-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Lamarque V. Souza <lamarque.souza@petrosoftdesign.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
commit 1758bde2e4 upstream.
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(),
but subsequent interrupts may retrigger it:
They may have been left enabled to facilitate wakeup and are not
quiesced until the ->suspend_noirq() phase. Unwanted interrupts may
hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(),
as well as between dpm_resume_noirq() and mdio_bus_phy_resume().
Retriggering the phy_state_machine() through an interrupt is not only
undesirable for the reason given in mdio_bus_phy_suspend() (freezing it
midway with phydev->lock held), but also because the PHY may be
inaccessible after it's suspended: Accesses to USB-attached PHYs are
blocked once usb_suspend_both() clears the can_submit flag and PHYs on
PCI network cards may become inaccessible upon suspend as well.
Amend phy_interrupt() to avoid triggering the state machine if the PHY
is suspended. Signal wakeup instead if the attached net_device or its
parent has been configured as a wakeup source. (Those conditions are
identical to mdio_bus_phy_may_suspend().) Postpone handling of the
interrupt until the PHY has resumed.
Before stopping the phy_state_machine() in mdio_bus_phy_suspend(),
wait for a concurrent phy_interrupt() to run to completion. That is
necessary because phy_interrupt() may have checked the PHY's suspend
status before the system sleep transition commenced and it may thus
retrigger the state machine after it was stopped.
Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(),
wait for a concurrent phy_interrupt() to complete to ensure that
interrupts which it postponed are properly rerun.
The issue was exposed by commit 1ce8b37241 ("usbnet: smsc95xx: Forward
PHY interrupts to PHY driver to avoid polling"), but has existed since
forever.
Fixes: 541cd3ee00 ("phylib: Fix deadlock on resume")
Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org # v2.6.33+
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b0dc529f5 upstream.
When routes corresponding to addresses are restored by
fixup_permanent_addr(), the dst_nopolicy parameter was not set.
The typical use case is a user that configures an address on a down
interface and then put this interface up.
Let's take care of this flag in addrconf_f6i_alloc(), so that every callers
benefit ont it.
CC: stable@kernel.org
CC: David Forster <dforster@brocade.com>
Fixes: df789fe752 ("ipv6: Provide ipv6 version of "disable_policy" sysctl")
Reported-by: Siwar Zitouni <siwar.zitouni@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220623120015.32640-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 067baa9a37 upstream.
By not checking whether llseek is NULL, this might jump to NULL. Also,
it doesn't check FMODE_LSEEK. Fix this by using vfs_llseek(), which
always does the right thing.
Fixes: f441584858 ("cifsd: add file operations")
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5e5f9dfc9 upstream.
FileOffset should not be greater than BeyondFinalZero in FSCTL_ZERO_DATA.
And don't call ksmbd_vfs_zero_data() if length is zero.
Cc: stable@vger.kernel.org
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18e39fb960 upstream.
generic/091, 263 test failed since commit f66f8b94e7 ("cifs: when
extending a file with falloc we should make files not-sparse").
FSCTL_ZERO_DATA sets the range of bytes to zero without extending file
size. The VFS_FALLOCATE_FL_KEEP_SIZE flag should be used even on
non-sparse files.
Cc: stable@vger.kernel.org
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cb0e3fb2c upstream.
amdgpu: [mmhub0] no-retry page fault (src_id:0 ring:40 vmid:8 pasid:32769, for process test_basic pid 3305 thread test_basic pid 3305)
amdgpu: in page starting at address 0x00007ff990003000 from IH client 0x12 (VMC)
amdgpu: VM_L2_PROTECTION_FAULT_STATUS:0x00840051
amdgpu: Faulty UTCL2 client ID: MP1 (0x0)
amdgpu: MORE_FAULTS: 0x1
amdgpu: WALKER_ERROR: 0x0
amdgpu: PERMISSION_FAULTS: 0x5
amdgpu: MAPPING_ERROR: 0x0
amdgpu: RW: 0x1
When memory is allocated by kfd, no one triggers the tlb flush for MMHUB0.
There is page fault from MMHUB0.
v2:fix indentation
v3:change subject and fix indentation
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a775e4e494 upstream.
This reverts commit 92020e81dd.
This causes stuttering and timeouts with DMCUB for some users
so revert it until we understand why and safely enable it
to save power.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1887
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05b538c176 upstream.
We can look inside the fixed buffer table only while holding
->uring_lock, however in some cases we don't do the right async prep for
IORING_OP_{WRITE,READ}_FIXED ending up with NULL req->imu forcing making
an io-wq worker to try to resolve the fixed buffer without proper
locking.
Move req->imu setup into early req init paths, i.e. io_prep_rw(), which
is called unconditionally for rw requests and under uring_lock.
Fixes: 634d00df5e ("io_uring: add full-fledged dynamic buffers support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 4cf35a2b62 ("net: mscc: ocelot: fix broken IP multicast
flooding") from v5.12, unregistered IP multicast flooding is
configurable in the ocelot driver for bridged ports. However, by writing
0 to the PGID_MCIPV4 and PGID_MCIPV6 port masks at initialization time,
the CPU port module, for which ocelot_port_set_mcast_flood() is not
called, will have unknown IP multicast flooding disabled.
This makes it impossible for an application such as smcroute to work
properly, since all IP multicast traffic received on a standalone port
is treated as unregistered (and dropped).
Starting with commit 7569459a52 ("net: dsa: manage flooding on the CPU
ports"), the limitation above has been lifted, because when standalone
ports become IFF_PROMISC or IFF_ALLMULTI, ocelot_port_set_mcast_flood()
would be called on the CPU port module, so unregistered multicast is
flooded to the CPU on an as-needed basis.
But between v5.12 and v5.18, IP multicast flooding to the CPU has
remained broken, promiscuous or not.
Delete the inexplicable premature optimization of clearing PGID_MCIPV4
and PGID_MCIPV6 as part of the init sequence, and allow unregistered IP
multicast to be flooded freely to the CPU port module.
Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Cc: stable@kernel.org
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e109e3617e upstream.
Ping-Ke Shih answered[1] a question for a user about an rtl8821ce device that
reported RFE 6, which the driver did not support. Ping-Ke suggested a possible
fix, but the user never reported back.
A second user discovered the above thread and tested the proposed fix.
Accordingly, I am pushing this change, even though I am not the author.
[1] https://lore.kernel.org/linux-wireless/3f5e2f6eac344316b5dd518ebfea2f95@realtek.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reported-and-tested-by: masterzorag <masterzorag@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220107024739.20967-1-Larry.Finger@lwfinger.net
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b789e3fe70 upstream.
RFE type4 is a new NIC which has one RF antenna shares with BT.
RFE type4 HW is the same as RFE type2 but attaching antenna to
aux antenna connector.
RFE type2 attach antenna to main antenna connector.
Load the same parameter as RFE type2 when initializing NIC.
Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210922023637.9357-1-pkshih@realtek.com
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 168f912893 upstream.
When calling setattr_prepare() to determine the validity of the
attributes the ia_{g,u}id fields contain the value that will be written
to inode->i_{g,u}id. This is exactly the same for idmapped and
non-idmapped mounts and allows callers to pass in the values they want
to see written to inode->i_{g,u}id.
When group ownership is changed a caller whose fsuid owns the inode can
change the group of the inode to any group they are a member of. When
searching through the caller's groups we need to use the gid mapped
according to the idmapped mount otherwise we will fail to change
ownership for unprivileged users.
Consider a caller running with fsuid and fsgid 1000 using an idmapped
mount that maps id 65534 to 1000 and 65535 to 1001. Consequently, a file
owned by 65534:65535 in the filesystem will be owned by 1000:1001 in the
idmapped mount.
The caller now requests the gid of the file to be changed to 1000 going
through the idmapped mount. In the vfs we will immediately map the
requested gid to the value that will need to be written to inode->i_gid
and place it in attr->ia_gid. Since this idmapped mount maps 65534 to
1000 we place 65534 in attr->ia_gid.
When we check whether the caller is allowed to change group ownership we
first validate that their fsuid matches the inode's uid. The
inode->i_uid is 65534 which is mapped to uid 1000 in the idmapped mount.
Since the caller's fsuid is 1000 we pass the check.
We now check whether the caller is allowed to change inode->i_gid to the
requested gid by calling in_group_p(). This will compare the passed in
gid to the caller's fsgid and search the caller's additional groups.
Since we're dealing with an idmapped mount we need to pass in the gid
mapped according to the idmapped mount. This is akin to checking whether
a caller is privileged over the future group the inode is owned by. And
that needs to take the idmapped mount into account. Note, all helpers
are nops without idmapped mounts.
New regression test sent to xfstests.
Link: https://github.com/lxc/lxd/issues/10537
Link: https://lore.kernel.org/r/20220613111517.2186646-1-brauner@kernel.org
Fixes: 2f221d6f7b ("attr: handle idmapped mounts")
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org # 5.15+
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 705191b03d upstream.
Last cycle we extended the idmapped mounts infrastructure to support
idmapped mounts of idmapped filesystems (No such filesystem yet exist.).
Since then, the meaning of an idmapped mount is a mount whose idmapping
is different from the filesystems idmapping.
While doing that work we missed to adapt the acl translation helpers.
They still assume that checking for the identity mapping is enough. But
they need to use the no_idmapping() helper instead.
Note, POSIX ACLs are always translated right at the userspace-kernel
boundary using the caller's current idmapping and the initial idmapping.
The order depends on whether we're coming from or going to userspace.
The filesystem's idmapping doesn't matter at the border.
Consequently, if a non-idmapped mount is passed we need to make sure to
always pass the initial idmapping as the mount's idmapping and not the
filesystem idmapping. Since it's irrelevant here it would yield invalid
ids and prevent setting acls for filesystems that are mountable in a
userns and support posix acls (tmpfs and fuse).
I verified the regression reported in [1] and verified that this patch
fixes it. A regression test will be added to xfstests in parallel.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215849 [1]
Fixes: bd303368b7 ("fs: support mapped mounts of mapped filesystems")
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # 5.15+
Cc: <regressions@lists.linux.dev>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd303368b7 upstream.
In previous patches we added new and modified existing helpers to handle
idmapped mounts of filesystems mounted with an idmapping. In this final
patch we convert all relevant places in the vfs to actually pass the
filesystem's idmapping into these helpers.
With this the vfs is in shape to handle idmapped mounts of filesystems
mounted with an idmapping. Note that this is just the generic
infrastructure. Actually adding support for idmapped mounts to a
filesystem mountable with an idmapping is follow-up work.
In this patch we extend the definition of an idmapped mount from a mount
that that has the initial idmapping attached to it to a mount that has
an idmapping attached to it which is not the same as the idmapping the
filesystem was mounted with.
As before we do not allow the initial idmapping to be attached to a
mount. In addition this patch prevents that the idmapping the filesystem
was mounted with can be attached to a mount created based on this
filesystem.
This has multiple reasons and advantages. First, attaching the initial
idmapping or the filesystem's idmapping doesn't make much sense as in
both cases the values of the i_{g,u}id and other places where k{g,u}ids
are used do not change. Second, a user that really wants to do this for
whatever reason can just create a separate dedicated identical idmapping
to attach to the mount. Third, we can continue to use the initial
idmapping as an indicator that a mount is not idmapped allowing us to
continue to keep passing the initial idmapping into the mapping helpers
to tell them that something isn't an idmapped mount even if the
filesystem is mounted with an idmapping.
Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 209188ce75 upstream.
Enable the mapped_fs{g,u}id() helpers to support filesystems mounted
with an idmapping. Apart from core mapping helpers that use
mapped_fs{g,u}id() to initialize struct inode's i_{g,u}id fields xfs is
the only place that uses these low-level helpers directly.
The patch only extends the helpers to be able to take the filesystem
idmapping into account. Since we don't actually yet pass the
filesystem's idmapping in no functional changes happen. This will happen
in a final patch.
Link: https://lore.kernel.org/r/20211123114227.3124056-9-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-9-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-9-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02e4079913 upstream.
Now that we ported all places to use the new low-level mapping helpers
that are able to support filesystems mounted with an idmapping we can
remove the old low-level mapping helpers. With the removal of these old
helpers we also conclude the renaming of the mapping helpers we started
in commit a65e58e791 ("fs: document and rename fsid helpers").
Link: https://lore.kernel.org/r/20211123114227.3124056-8-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-8-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-8-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4472071331 upstream.
In a few places the vfs needs to interact with bare k{g,u}ids directly
instead of struct inode. These are just a few. In previous patches we
introduced low-level mapping helpers that are able to support
filesystems mounted an idmapping. This patch simply converts the places
to use these new helpers.
Link: https://lore.kernel.org/r/20211123114227.3124056-7-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-7-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ac2a41049 upstream.
Currently we only support idmapped mounts for filesystems mounted
without an idmapping. This was a conscious decision mentioned in
multiple places (cf. e.g. [1]).
As explained at length in [3] it is perfectly fine to extend support for
idmapped mounts to filesystem's mounted with an idmapping should the
need arise. The need has been there for some time now. Various container
projects in userspace need this to run unprivileged and nested
unprivileged containers (cf. [2]).
Before we can port any filesystem that is mountable with an idmapping to
support idmapped mounts we need to first extend the mapping helpers to
account for the filesystem's idmapping. This again, is explained at
length in our documentation at [3] but I'll give an overview here again.
Currently, the low-level mapping helpers implement the remapping
algorithms described in [3] in a simplified manner. Because we could
rely on the fact that all filesystems supporting idmapped mounts are
mounted without an idmapping the translation step from or into the
filesystem idmapping could be skipped.
In order to support idmapped mounts of filesystem's mountable with an
idmapping the translation step we were able to skip before cannot be
skipped anymore. A filesystem mounted with an idmapping is very likely
to not use an identity mapping and will instead use a non-identity
mapping. So the translation step from or into the filesystem's idmapping
in the remapping algorithm cannot be skipped for such filesystems. More
details with examples can be found in [3].
This patch adds a few new and prepares some already existing low-level
mapping helpers to perform the full translation algorithm explained in
[3]. The low-level helpers can be written in a way that they only
perform the additional translation step when the filesystem is indeed
mounted with an idmapping.
If the low-level helpers detect that they are not dealing with an
idmapped mount they can simply return the relevant k{g,u}id unchanged;
no remapping needs to be performed at all. The no_idmapping() helper
detects whether the shortcut can be used.
If the low-level helpers detected that they are dealing with an idmapped
mount but the underlying filesystem is mounted without an idmapping we
can rely on the previous shorcut and can continue to skip the
translation step from or into the filesystem's idmapping.
These checks guarantee that only the minimal amount of work is
performed. As before, if idmapped mounts aren't used the low-level
helpers are idempotent and no work is performed at all.
This patch adds the helpers mapped_k{g,u}id_fs() and
mapped_k{g,u}id_user(). Following patches will port all places to
replace the old k{g,u}id_into_mnt() and k{g,u}id_from_mnt() with these
two new helpers. After the conversion is done k{g,u}id_into_mnt() and
k{g,u}id_from_mnt() will be removed. This also concludes the renaming of
the mapping helpers we started in [4]. Now, all mapping helpers will
started with the "mapped_" prefix making everything nice and consistent.
The mapped_k{g,u}id_fs() helpers replace the k{g,u}id_into_mnt()
helpers. They are to be used when k{g,u}ids are to be mapped from the
vfs, e.g. from from struct inode's i_{g,u}id. Conversely, the
mapped_k{g,u}id_user() helpers replace the k{g,u}id_from_mnt() helpers.
They are to be used when k{g,u}ids are to be written to disk, e.g. when
entering from a system call to change ownership of a file.
This patch only introduces the helpers. It doesn't yet convert the
relevant places to account for filesystem mounted with an idmapping.
[1]: commit 2ca4dcc490 ("fs/mount_setattr: tighten permission checks")
[2]: https://github.com/containers/podman/issues/10374
[3]: Documentations/filesystems/idmappings.rst
[4]: commit a65e58e791 ("fs: document and rename fsid helpers")
Link: https://lore.kernel.org/r/20211123114227.3124056-5-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-5-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-5-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 476860b3eb upstream.
If the caller's fs{g,u}id aren't mapped in the mount's idmapping we can
return early and skip the check whether the mapped fs{g,u}id also have a
mapping in the filesystem's idmapping. If the fs{g,u}id aren't mapped in
the mount's idmapping they consequently can't be mapped in the
filesystem's idmapping. So there's no point in checking that.
Link: https://lore.kernel.org/r/20211123114227.3124056-4-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-4-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-4-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a793d79ea3 upstream.
The low-level mapping helpers were so far crammed into fs.h. They are
out of place there. The fs.h header should just contain the higher-level
mapping helpers that interact directly with vfs objects such as struct
super_block or struct inode and not the bare mapping helpers. Similarly,
only vfs and specific fs code shall interact with low-level mapping
helpers. And so they won't be made accessible automatically through
regular {g,u}id helpers.
Link: https://lore.kernel.org/r/20211123114227.3124056-3-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-3-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-3-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb49e9e730 upstream.
Multiple places open-code the same check to determine whether a given
mount is idmapped. Introduce a simple helper function that can be used
instead. This allows us to get rid of the fragile open-coding. We will
later change the check that is used to determine whether a given mount
is idmapped. Introducing a helper allows us to do this in a single
place instead of doing it for multiple places.
Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b97cca3ba9 ]
In commit 02b9984d64, we pushed a sync_filesystem() call from the VFS
into xfs_fs_remount. The only time that we ever need to push dirty file
data or metadata to disk for a remount is if we're remounting the
filesystem read only, so this really could be moved to xfs_remount_ro.
Once we've moved the call site, actually check the return value from
sync_filesystem.
Fixes: 02b9984d64 ("fs: push sync_filesystem() down to the file system's remount_fs()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8d92a66e8 ]
While I was running with KASAN and lockdep enabled, I stumbled upon an
KASAN report about a UAF to a freed CIL checkpoint. Looking at the
comment for xfs_log_item_in_current_chkpt, it seems pretty obvious to me
that the original patch to xfs_defer_finish_noroll should have done
something to lock the CIL to prevent it from switching the CIL contexts
while the predicate runs.
For upper level code that needs to know if a given log item is new
enough not to need relogging, add a new wrapper that takes the CIL
context lock long enough to sample the current CIL context. This is
kind of racy in that the CIL can switch the contexts immediately after
sampling, but that's ok because the consequence is that the defer ops
code is a little slow to relog items.
==================================================================
BUG: KASAN: use-after-free in xfs_log_item_in_current_chkpt+0x139/0x160 [xfs]
Read of size 8 at addr ffff88804ea5f608 by task fsstress/527999
CPU: 1 PID: 527999 Comm: fsstress Tainted: G D 5.16.0-rc4-xfsx #rc4
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x83/0xdf
xfs_log_item_in_current_chkpt+0x139/0x160
xfs_defer_finish_noroll+0x3bb/0x1e30
__xfs_trans_commit+0x6c8/0xcf0
xfs_reflink_remap_extent+0x66f/0x10e0
xfs_reflink_remap_blocks+0x2dd/0xa90
xfs_file_remap_range+0x27b/0xc30
vfs_dedupe_file_range_one+0x368/0x420
vfs_dedupe_file_range+0x37c/0x5d0
do_vfs_ioctl+0x308/0x1260
__x64_sys_ioctl+0xa1/0x170
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2c71a2950b
Code: 0f 1e fa 48 8b 05 85 39 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d 55 39 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe8c0e03c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00005600862a8740 RCX: 00007f2c71a2950b
RDX: 00005600862a7be0 RSI: 00000000c0189436 RDI: 0000000000000004
RBP: 000000000000000b R08: 0000000000000027 R09: 0000000000000003
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000005a
R13: 00005600862804a8 R14: 0000000000016000 R15: 00005600862a8a20
</TASK>
Allocated by task 464064:
kasan_save_stack+0x1e/0x50
__kasan_kmalloc+0x81/0xa0
kmem_alloc+0xcd/0x2c0 [xfs]
xlog_cil_ctx_alloc+0x17/0x1e0 [xfs]
xlog_cil_push_work+0x141/0x13d0 [xfs]
process_one_work+0x7f6/0x1380
worker_thread+0x59d/0x1040
kthread+0x3b0/0x490
ret_from_fork+0x1f/0x30
Freed by task 51:
kasan_save_stack+0x1e/0x50
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xed/0x130
slab_free_freelist_hook+0x7f/0x160
kfree+0xde/0x340
xlog_cil_committed+0xbfd/0xfe0 [xfs]
xlog_cil_process_committed+0x103/0x1c0 [xfs]
xlog_state_do_callback+0x45d/0xbd0 [xfs]
xlog_ioend_work+0x116/0x1c0 [xfs]
process_one_work+0x7f6/0x1380
worker_thread+0x59d/0x1040
kthread+0x3b0/0x490
ret_from_fork+0x1f/0x30
Last potentially related work creation:
kasan_save_stack+0x1e/0x50
__kasan_record_aux_stack+0xb7/0xc0
insert_work+0x48/0x2e0
__queue_work+0x4e7/0xda0
queue_work_on+0x69/0x80
xlog_cil_push_now.isra.0+0x16b/0x210 [xfs]
xlog_cil_force_seq+0x1b7/0x850 [xfs]
xfs_log_force_seq+0x1c7/0x670 [xfs]
xfs_file_fsync+0x7c1/0xa60 [xfs]
__x64_sys_fsync+0x52/0x80
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88804ea5f600
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 8 bytes inside of
256-byte region [ffff88804ea5f600, ffff88804ea5f700)
The buggy address belongs to the page:
page:ffffea00013a9780 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804ea5ea00 pfn:0x4ea5e
head:ffffea00013a9780 order:1 compound_mapcount:0
flags: 0x4fff80000010200(slab|head|node=1|zone=1|lastcpupid=0xfff)
raw: 04fff80000010200 ffffea0001245908 ffffea00011bd388 ffff888004c42b40
raw: ffff88804ea5ea00 0000000000100009 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88804ea5f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88804ea5f580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88804ea5f600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88804ea5f680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88804ea5f700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: 4e919af782 ("xfs: periodically relog deferred intent items")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 09654ed8a1 ]
Got a report that a repeated crash test of a container host would
eventually fail with a log recovery error preventing the system from
mounting the root filesystem. It manifested as a directory leaf node
corruption on writeback like so:
XFS (loop0): Mounting V5 Filesystem
XFS (loop0): Starting recovery (logdev: internal)
XFS (loop0): Metadata corruption detected at xfs_dir3_leaf_check_int+0x99/0xf0, xfs_dir3_leaf1 block 0x12faa158
XFS (loop0): Unmount and run xfs_repair
XFS (loop0): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 3d f1 00 00 e1 9e d5 8b ........=.......
00000010: 00 00 00 00 12 fa a1 58 00 00 00 29 00 00 1b cc .......X...)....
00000020: 91 06 78 ff f7 7e 4a 7d 8d 53 86 f2 ac 47 a8 23 ..x..~J}.S...G.#
00000030: 00 00 00 00 17 e0 00 80 00 43 00 00 00 00 00 00 .........C......
00000040: 00 00 00 2e 00 00 00 08 00 00 17 2e 00 00 00 0a ................
00000050: 02 35 79 83 00 00 00 30 04 d3 b4 80 00 00 01 50 .5y....0.......P
00000060: 08 40 95 7f 00 00 02 98 08 41 fe b7 00 00 02 d4 .@.......A......
00000070: 0d 62 ef a7 00 00 01 f2 14 50 21 41 00 00 00 0c .b.......P!A....
XFS (loop0): Corruption of in-memory data (0x8) detected at xfs_do_force_shutdown+0x1a/0x20 (fs/xfs/xfs_buf.c:1514). Shutting down.
XFS (loop0): Please unmount the filesystem and rectify the problem(s)
XFS (loop0): log mount/recovery failed: error -117
XFS (loop0): log mount failed
Tracing indicated that we were recovering changes from a transaction
at LSN 0x29/0x1c16 into a buffer that had an LSN of 0x29/0x1d57.
That is, log recovery was overwriting a buffer with newer changes on
disk than was in the transaction. Tracing indicated that we were
hitting the "recovery immediately" case in
xfs_buf_log_recovery_lsn(), and hence it was ignoring the LSN in the
buffer.
The code was extracting the LSN correctly, then ignoring it because
the UUID in the buffer did not match the superblock UUID. The
problem arises because the UUID check uses the wrong UUID - it
should be checking the sb_meta_uuid, not sb_uuid. This filesystem
has sb_uuid != sb_meta_uuid (which is fine), and the buffer has the
correct matching sb_meta_uuid in it, it's just the code checked it
against the wrong superblock uuid.
The is no corruption in the filesystem, and failing to recover the
buffer due to a write verifier failure means the recovery bug did
not propagate the corruption to disk. Hence there is no corruption
before or after this bug has manifested, the impact is limited
simply to an unmountable filesystem....
This was missed back in 2015 during an audit of incorrect sb_uuid
usage that resulted in commit fcfbe2c4ef ("xfs: log recovery needs
to validate against sb_meta_uuid") that fixed the magic32 buffers to
validate against sb_meta_uuid instead of sb_uuid. It missed the
magicda buffers....
Fixes: ce748eaa65 ("xfs: create new metadata UUID field and incompat flag")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 089558bc7b ]
As part of multiple customer escalations due to file data corruption
after copy on write operations, I wrote some fstests that use fsstress
to hammer on COW to shake things loose. Regrettably, I caught some
filesystem shutdowns due to incorrect rmap operations with the following
loop:
mount <filesystem> # (0)
fsstress <run only readonly ops> & # (1)
while true; do
fsstress <run all ops>
mount -o remount,ro # (2)
fsstress <run only readonly ops>
mount -o remount,rw # (3)
done
When (2) happens, notice that (1) is still running. xfs_remount_ro will
call xfs_blockgc_stop to walk the inode cache to free all the COW
extents, but the blockgc mechanism races with (1)'s reader threads to
take IOLOCKs and loses, which means that it doesn't clean them all out.
Call such a file (A).
When (3) happens, xfs_remount_rw calls xfs_reflink_recover_cow, which
walks the ondisk refcount btree and frees any COW extent that it finds.
This function does not check the inode cache, which means that incore
COW forks of inode (A) is now inconsistent with the ondisk metadata. If
one of those former COW extents are allocated and mapped into another
file (B) and someone triggers a COW to the stale reservation in (A), A's
dirty data will be written into (B) and once that's done, those blocks
will be transferred to (A)'s data fork without bumping the refcount.
The results are catastrophic -- file (B) and the refcount btree are now
corrupt. Solve this race by forcing the xfs_blockgc_free_space to run
synchronously, which causes xfs_icwalk to return to inodes that were
skipped because the blockgc code couldn't take the IOLOCK. This is safe
to do here because the VFS has already prohibited new writer threads.
Fixes: 10ddf64e42 ("xfs: remove leftover CoW reservations when remounting ro")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1de97fe29 ]
When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine.
Adding a getxattr operation after xattr corrupted, I can reproduce it 100%.
The deadlock as below:
[983.923403] task:setfattr state:D stack: 0 pid:17639 ppid: 14687 flags:0x00000080
[ 983.923405] Call Trace:
[ 983.923410] __schedule+0x2c4/0x700
[ 983.923412] schedule+0x37/0xa0
[ 983.923414] schedule_timeout+0x274/0x300
[ 983.923416] __down+0x9b/0xf0
[ 983.923451] ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs]
[ 983.923453] down+0x3b/0x50
[ 983.923471] xfs_buf_lock+0x33/0xf0 [xfs]
[ 983.923490] xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs]
[ 983.923508] xfs_buf_get_map+0x4c/0x320 [xfs]
[ 983.923525] xfs_buf_read_map+0x53/0x310 [xfs]
[ 983.923541] ? xfs_da_read_buf+0xcf/0x120 [xfs]
[ 983.923560] xfs_trans_read_buf_map+0x1cf/0x360 [xfs]
[ 983.923575] ? xfs_da_read_buf+0xcf/0x120 [xfs]
[ 983.923590] xfs_da_read_buf+0xcf/0x120 [xfs]
[ 983.923606] xfs_da3_node_read+0x1f/0x40 [xfs]
[ 983.923621] xfs_da3_node_lookup_int+0x69/0x4a0 [xfs]
[ 983.923624] ? kmem_cache_alloc+0x12e/0x270
[ 983.923637] xfs_attr_node_hasname+0x6e/0xa0 [xfs]
[ 983.923651] xfs_has_attr+0x6e/0xd0 [xfs]
[ 983.923664] xfs_attr_set+0x273/0x320 [xfs]
[ 983.923683] xfs_xattr_set+0x87/0xd0 [xfs]
[ 983.923686] __vfs_removexattr+0x4d/0x60
[ 983.923688] __vfs_removexattr_locked+0xac/0x130
[ 983.923689] vfs_removexattr+0x4e/0xf0
[ 983.923690] removexattr+0x4d/0x80
[ 983.923693] ? __check_object_size+0xa8/0x16b
[ 983.923695] ? strncpy_from_user+0x47/0x1a0
[ 983.923696] ? getname_flags+0x6a/0x1e0
[ 983.923697] ? _cond_resched+0x15/0x30
[ 983.923699] ? __sb_start_write+0x1e/0x70
[ 983.923700] ? mnt_want_write+0x28/0x50
[ 983.923701] path_removexattr+0x9b/0xb0
[ 983.923702] __x64_sys_removexattr+0x17/0x20
[ 983.923704] do_syscall_64+0x5b/0x1a0
[ 983.923705] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 983.923707] RIP: 0033:0x7f080f10ee1b
When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in
xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it
free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job.
Then subsequent removexattr will hang because of it.
This bug was introduced by kernel commit 07120f1abd ("xfs: Add xfs_has_attr and subroutines").
It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state
in this case. But xfs_attr_node_hasname will free state itself instead of caller if
xfs_da3_node_lookup_int fails.
Fix this bug by moving the step of free state into caller.
Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and
xfs_attr_node_removename_setup function because we should free state ourselves.
Fixes: 07120f1abd ("xfs: Add xfs_has_attr and subroutines")
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5ca5916b6b ]
If writeback I/O to a COW extent fails, the COW fork blocks are
punched out and the data fork blocks left alone. It is possible for
COW fork blocks to overlap non-shared data fork blocks (due to
cowextsz hint prealloc), however, and writeback unconditionally maps
to the COW fork whenever blocks exist at the corresponding offset of
the page undergoing writeback. This means it's quite possible for a
COW fork extent to overlap delalloc data fork blocks, writeback to
convert and map to the COW fork blocks, writeback to fail, and
finally for ioend completion to cancel the COW fork blocks and leave
stale data fork delalloc blocks around in the inode. The blocks are
effectively stale because writeback failure also discards dirty page
state.
If this occurs, it is likely to trigger assert failures, free space
accounting corruption and failures in unrelated file operations. For
example, a subsequent reflink attempt of the affected file to a new
target file will trip over the stale delalloc in the source file and
fail. Several of these issues are occasionally reproduced by
generic/648, but are reproducible on demand with the right sequence
of operations and timely I/O error injection.
To fix this problem, update the ioend failure path to also punch out
underlying data fork delalloc blocks on I/O error. This is analogous
to the writeback submission failure path in xfs_discard_page() where
we might fail to map data fork delalloc blocks and consistent with
the successful COW writeback completion path, which is responsible
for unmapping from the data fork and remapping in COW fork blocks.
Fixes: 787eb48550 ("xfs: fix and streamline error handling in xfs_end_io")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c30a0cbd07 ]
For kmalloc() allocations SLOB prepends the blocks with a 4-byte header,
and it puts the size of the allocated blocks in that header.
Blocks allocated with kmem_cache_alloc() allocations do not have that
header.
SLOB explodes when you allocate memory with kmem_cache_alloc() and then
try to free it with kfree() instead of kmem_cache_free().
SLOB will assume that there is a header when there is none, read some
garbage to size variable and corrupt the adjacent objects, which
eventually leads to hang or panic.
Let's make XFS work with SLOB by using proper free function.
Fixes: 9749fee83f ("xfs: enable the xfs_defer mechanism to process extents to free")
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d6b902ea0 upstream.
The local variables check_state (in bch_btree_check()) and state (in
bch_sectors_dirty_init()) should be fully filled by 0, because before
allocating them on stack, they were dynamically allocated by kzalloc().
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220527152818.27545-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The build rightfully complains about:
arch/x86/kernel/kvm.o: warning: objtool: __raw_callee_save___kvm_vcpu_is_preempted()+0x12: missing int3 after ret
because the ASM_RET call is not being used correctly in kvm_vcpu_is_preempted().
This was hand-fixed-up in the kvm merge commit a4cfff3f0f ("Merge branch
'kvm-older-features' into HEAD") which of course can not be backported to
stable kernels, so just fix this up directly instead.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2390095113 upstream.
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it had been broken for a decade.
Commit 28438794ab ("modpost: fix section mismatch check for exported
init/exit sections") fixed it so modpost started to warn it again, then
this showed up:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup()
The symbol tick_nohz_full_setup is exported and annotated __init
Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export.
Drop the export because tick_nohz_full_setup() is only called from the
built-in code in kernel/sched/isolation.c.
Fixes: ae9e557b5b ("time: Export tick start/stop functions for rcutorture")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Backlund <tmb@tmb.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e561e472a3 upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: a489043f46 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53632ba87d upstream.
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.
Commit 3fdc7d3fe4 ("kbuild: link vmlinux only once for
CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix
the issue at all.
Now I realized I had applied a wrong patch.
In v1 patch [1], the autoksyms_recursive target correctly recurses to
"$(MAKE) -f $(srctree)/Makefile autoksyms_recursive".
In v2 patch [2], I accidentally dropped the diff line, and it recurses to
"$(MAKE) -f $(srctree)/Makefile vmlinux".
Restore the code I intended in v1.
[1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/
[2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/
Fixes: 3fdc7d3fe4 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
