Commit Graph

94 Commits

Author SHA1 Message Date
Christoph Hellwig
702f3189e4 block: move the code to do early boot lookup of block devices to block/
Create a new block/early-lookup.c to keep the early block device lookup
code instead of having this code sit with the early mount code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:57:40 -06:00
Sagi Grimberg
edde9e70bb blk-mq-rdma: remove queue mapping helper for rdma devices
No rdma device exposes its irq vectors affinity today. So the only
mapping that we have left, is the default blk_mq_map_queues, which
we fallback to anyways. Also fixup the only consumer of this helper
(nvme-rdma).

Remove this now dead code.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-04-13 08:59:05 +02:00
Christoph Hellwig
db05628435 blk-cgroup: move blkcg_{get,set}_fc_appid out of line
No need to have these helpers inline.  Also remove the stubs and just use
an IS_ENABLED for the get side (the set side already is only built
conditionlly).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-02 14:06:20 -06:00
Eric Biggers
20f01f1632 blk-crypto: show crypto capabilities in sysfs
Add sysfs files that expose the inline encryption capabilities of
request queues:

	/sys/block/$disk/queue/crypto/max_dun_bits
	/sys/block/$disk/queue/crypto/modes/$mode
	/sys/block/$disk/queue/crypto/num_keyslots

Userspace can use these new files to decide what encryption settings to
use, or whether to use inline encryption at all.  This also brings the
crypto capabilities in line with the other queue properties, which are
already discoverable via the queue directory in sysfs.

Design notes:

  - Place the new files in a new subdirectory "crypto" to group them
    together and to avoid complicating the main "queue" directory.  This
    also makes it possible to replace "crypto" with a symlink later if
    we ever make the blk_crypto_profiles into real kobjects (see below).

  - It was necessary to define a new kobject that corresponds to the
    crypto subdirectory.  For now, this kobject just contains a pointer
    to the blk_crypto_profile.  Note that multiple queues (and hence
    multiple such kobjects) may refer to the same blk_crypto_profile.

    An alternative design would more closely match the current kernel
    data structures: the blk_crypto_profile could be a kobject itself,
    located directly under the host controller device's kobject, while
    /sys/block/$disk/queue/crypto would be a symlink to it.

    I decided not to do that for now because it would require a lot more
    changes, such as no longer embedding blk_crypto_profile in other
    structures, and also because I'm not sure we can rule out moving the
    crypto capabilities into 'struct queue_limits' in the future.  (Even
    if multiple queues share the same crypto engine, maybe the supported
    data unit sizes could differ due to other queue properties.)  It
    would also still be possible to switch to that design later without
    breaking userspace, by replacing the directory with a symlink.

  - Use "max_dun_bits" instead of "max_dun_bytes".  Currently, the
    kernel internally stores this value in bytes, but that's an
    implementation detail.  It probably makes more sense to talk about
    this value in bits, and choosing bits is more future-proof.

  - "modes" is a sub-subdirectory, since there may be multiple supported
    crypto modes, sysfs is supposed to have one value per file, and it
    makes sense to group all the mode files together.

  - Each mode had to be named.  The crypto API names like "xts(aes)" are
    not appropriate because they don't specify the key size.  Therefore,
    I assigned new names.  The exact names chosen are arbitrary, but
    they happen to match the names used in log messages in fs/crypto/.

  - The "num_keyslots" file is a bit different from the others in that
    it is only useful to know for performance reasons.  However, it's
    included as it can still be useful.  For example, a user might not
    want to use inline encryption if there aren't very many keyslots.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220124215938.2769-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-28 06:40:23 -07:00
Christoph Hellwig
4054cff92c block: remove blk-exec.c
All this code is tightly coupled to the blk-mq core, so move it
there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-4-hch@lst.de
[axboe: remove doc generation for blk-exec.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:34:50 -07:00
Damien Le Moal
a2247f19ee block: Add independent access ranges support
The Concurrent Positioning Ranges VPD page (for SCSI) and data log page
(for ATA) contain parameters describing the set of contiguous LBAs that
can be served independently by a single LUN multi-actuator hard-disk.
Similarly, a logically defined block device composed of multiple disks
can in some cases execute requests directed at different sector ranges
in parallel. A dm-linear device aggregating 2 block devices together is
an example.

This patch implements support for exposing a block device independent
access ranges to the user through sysfs to allow optimizing device
accesses to increase performance.

To describe the set of independent sector ranges of a device (actuators
of a multi-actuator HDDs or table entries of a dm-linear device),
The type struct blk_independent_access_ranges is introduced. This
structure describes the sector ranges using an array of
struct blk_independent_access_range structures. This range structure
defines the start sector and number of sectors of the access range.
The ranges in the array cannot overlap and must contain all sectors
within the device capacity.

The function disk_set_independent_access_ranges() allows a device
driver to signal to the block layer that a device has multiple
independent access ranges.  In this case, a struct
blk_independent_access_ranges is attached to the device request queue
by the function disk_set_independent_access_ranges(). The function
disk_alloc_independent_access_ranges() is provided for drivers to
allocate this structure.

struct blk_independent_access_ranges contains kobjects (struct kobject)
to expose to the user through sysfs the set of independent access ranges
supported by a device. When the device is initialized, sysfs
registration of the ranges information is done from blk_register_queue()
using the block layer internal function
disk_register_independent_access_ranges(). If a driver calls
disk_set_independent_access_ranges() for a registered queue, e.g. when a
device is revalidated, disk_set_independent_access_ranges() will execute
disk_register_independent_access_ranges() to update the sysfs attribute
files.  The sysfs file structure created starts from the
independent_access_ranges sub-directory and contains the start sector
and number of sectors of each range, with the information for each range
grouped in numbered sub-directories.

E.g. for a dual actuator HDD, the user sees:

$ tree /sys/block/sdk/queue/independent_access_ranges/
/sys/block/sdk/queue/independent_access_ranges/
|-- 0
|   |-- nr_sectors
|   `-- sector
`-- 1
    |-- nr_sectors
    `-- sector

For a regular device with a single access range, the
independent_access_ranges sysfs directory does not exist.

Device revalidation may lead to changes to this structure and to the
attribute values. When manipulated, the queue sysfs_lock and
sysfs_dir_lock mutexes are held for atomicity, similarly to how the
blk-mq and elevator sysfs queue sub-directories are protected.

The code related to the management of independent access ranges is
added in the new file block/blk-ia-ranges.c.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26 20:36:47 -06:00
Eric Biggers
1e8d44bddf blk-crypto: rename keyslot-manager files to blk-crypto-profile
In preparation for renaming struct blk_keyslot_manager to struct
blk_crypto_profile, rename the keyslot-manager.h and keyslot-manager.c
source files.  Renaming these files separately before making a lot of
changes to their contents makes it easier for git to understand that
they were renamed.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211018180453.40441-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-21 10:49:32 -06:00
Masahiro Yamada
4c928904ff block: move CONFIG_BLOCK guard to top Makefile
Every object under block/ depends on CONFIG_BLOCK.

Move the guard to the top Makefile since there is no point to
descend into block/ if CONFIG_BLOCK=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210927140000.866249-5-masahiroy@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:35 -06:00
Linus Torvalds
c0f7e49fc4 block-5.15-2021-09-11
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmE8ueIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpkSYD/9eaQ1Hxc+X+4eVb3A9Cpy36Qy/uY/hArnT
 kSUDtQitrRigqhStaD0MGpknWFnZE4cSojbYN0OoEWL7GC8idSZXx7KrVJpSHGbM
 XGVEflohvjDLNPkV99gmlzF2o6zPlWESApU1/HO2x+Ws1oKaYDAfFVf0CPGPe2C6
 MRerU5v3HSmTC0eFZxU246bwwX/phNuNDokndR27rrsjK0mLF5UoMKySeqy3INp5
 6mj3R+HNIW5j8eQk/HJPW7dgiKpWYneWV2Z90DuOLbcJ+wnx7s07wT1yRnOFUTsb
 p2ojVWmXtCJ1kRex6bK/eeIJC5TYvT3bNwsnIRmJHd9btHqhm2uKy77m3S1AuE7w
 K8bN581aXlr/3pUbFyYZDZQbYshUn25YP9OlyS9r4pklCh9C5KneL1b4xswWTDTB
 whvPZlkot3rGD8LHDpV5xVVzeaAcbSXanIRROjxHqQSRRTA9BjG3E4A2cDh8nmYD
 mRGEimfZcoojF2EQJYswPOQ24cZwpnihPpJO9NkOodRqfasn6XakAGg6SONFYyQ0
 Ewa6QzIOCebBgOVGbzMtpoDpnySE12ONmrDCbSEiYFJLXBMMiqgNON/Xaq0tmXHT
 lsDpyz3ytWAB9OZ3M0/9arZzlFf/E+FRqt4ExelmwxiutKRb1dIKQq8xip/YxdA+
 Y86kwUoAXQ==
 =1ajD
 -----END PGP SIGNATURE-----

Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
     - fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
     - update a MAINTAINERS email address (Chaitanya Kulkarni)
     - set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
     - handle errors from add_disk() (Luis Chamberlain)
     - update the keep alive interval when kato is modified (Tatsuya Sasaki)
     - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
     - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
     - only call synchronize_srcu when clearing current path (Daniel Wagner)
     - revalidate paths during rescan (Hannes Reinecke)

 - Split out the fs/block_dev into block/fops.c and block/bdev.c, which
   has been long overdue. Do this now before -rc1, to avoid annoying
   conflicts due to this (Christoph)

 - blk-throtl use-after-free fix (Li)

 - Improve plug depth for multi-device plugs, greatly increasing md
   resync performance (Song)

 - blkdev_show() locking fix (Tetsuo)

 - n64cart error check fix (Yang)

* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  n64cart: fix return value check in n64cart_probe()
  blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
  block: move fs/block_dev.c to block/bdev.c
  block: split out operations on block special files
  blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
  block: genhd: don't call blkdev_show() with major_names_lock held
  nvme: update MAINTAINERS email address
  nvme: add error handling support for add_disk()
  nvme: only call synchronize_srcu when clearing current path
  nvme: update keep alive interval when kato is modified
  nvme-tcp: Do not reset transport on data digest errors
  nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
  nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
  nvmet: looks at the passthrough controller when initializing CAP
  nvme: move nvme_multi_css into nvme.h
  nvme-multipath: revalidate paths during rescan
  nvme-multipath: set QUEUE_FLAG_NOWAIT
2021-09-11 10:19:51 -07:00
Christoph Hellwig
0dca4462ed block: move fs/block_dev.c to block/bdev.c
Move it together with the rest of the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210907141303.1371844-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-07 08:39:40 -06:00
Christoph Hellwig
cd82cca7eb block: split out operations on block special files
Add a new block/fops.c for all the file and address_space operations
that provide the block special file support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210907141303.1371844-2-hch@lst.de
[axboe: correct trailing whitespace while at it]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-07 08:39:29 -06:00
Linus Torvalds
a9c9a6f741 SCSI misc on 20210902
This series consists of the usual driver updates (ufs, qla2xxx,
 target, smartpqi, lpfc, mpt3sas).  The core change causing the most
 churn was replacing the command request field request with a macro,
 allowing us to offset map to it and remove the redundant field; the
 same was also done for the tag field.  The most impactful change is
 the final removal of scsi_ioctl, which has been deprecated for over a
 decade.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
 4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
 hC3BUEW8f2LLnujWanQ=
 =lC5o
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, qla2xxx,
  target, smartpqi, lpfc, mpt3sas).

  The core change causing the most churn was replacing the command
  request field request with a macro, allowing us to offset map to it
  and remove the redundant field; the same was also done for the tag
  field.

  The most impactful change is the final removal of scsi_ioctl, which
  has been deprecated for over a decade"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
  scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
  scsi: ufs: ufs-exynos: Fix static checker warning
  scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
  scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
  scsi: lpfc: Copyright updates for 14.0.0.1 patches
  scsi: lpfc: Update lpfc version to 14.0.0.1
  scsi: lpfc: Add bsg support for retrieving adapter cmf data
  scsi: lpfc: Add cmf_info sysfs entry
  scsi: lpfc: Add debugfs support for cm framework buffers
  scsi: lpfc: Add support for maintaining the cm statistics buffer
  scsi: lpfc: Add rx monitoring statistics
  scsi: lpfc: Add support for the CM framework
  scsi: lpfc: Add cmfsync WQE support
  scsi: lpfc: Add support for cm enablement buffer
  scsi: lpfc: Add cm statistics buffer support
  scsi: lpfc: Add EDC ELS support
  scsi: lpfc: Expand FPIN and RDF receive logging
  scsi: lpfc: Add MIB feature enablement support
  scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
  scsi: fc: Add EDC ELS definition
  ...
2021-09-02 15:09:46 -07:00
Linus Torvalds
679369114e for-5.15/block-2021-08-30
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmEs6H0QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpukbD/9Qk9fQte+WJVmpbdvhV40gcKBVnGOVH0ke
 k+36x6AB/gWKnFHwtprsSyVqPxmzqwTv9VIq5l/s3Vydt3L61znvTneBeN03Wlkn
 UTxD0lY8HzyVWnZb82LBBjjy7cs6EzrFG4kBH/ZiTAyTcBsCAvzo5J7mywb4gFjj
 L/HeBq58EJ3WCUlxlVW1ijctvi7wnGoaH5bZY1TE00GGT6TysN2bEPfzjkuYHrDz
 RqhoQdWPLDz6h3x9lAncPw2MWlcmlGvJ96ABseAKFPKvXxE2PzgolSoQfVUUJtko
 bqGyy2ns+pxN11SrcGYjogEKVKhONoms/5UN1RtwRBVsgvecxlHER/SgyZ8luBDo
 lFhVXulkSjpswbWutRy3USge98GwMu2Z4ppP2CDmO7hkQd0DF8sL0kPKyaREkcHi
 NmsD/0zF2uUhUVN+PRC/MuzngAmL4Mmxjk70L+MohlK7e+H3pnEo1ec3OMcXe+wB
 dG6t/BFD9bYmj0UjsHeXEoR/iRuvSba1L8zBz5dhRaHH6DvdycYhpynXWWlU3C8K
 3nzEVVpcDINMsiRl1Vqb6g6HsMwHIH84FRl7Mc51UmhW9C4gLfWMCt1guQuzOj72
 yEbmCLydE/FR2IUPY7eqX8hRG8GTUlMtSvGdgnvBOcWj+K3buT/c5yVTHgTrN8ox
 LCOXHSvV6w==
 =S8fs
 -----END PGP SIGNATURE-----

Merge tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "Nothing major in here - lots of good cleanups and tech debt handling,
  which is also evident in the diffstats. In particular:

   - Add disk sequence numbers (Matteo)

   - Discard merge fix (Ming)

   - Relax disk zoned reporting restrictions (Niklas)

   - Bio error handling zoned leak fix (Pavel)

   - Start of proper add_disk() error handling (Luis, Christoph)

   - blk crypto fix (Eric)

   - Non-standard GPT location support (Dmitry)

   - IO priority improvements and cleanups (Damien)o

   - blk-throtl improvements (Chunguang)

   - diskstats_show() stack reduction (Abd-Alrhman)

   - Loop scheduler selection (Bart)

   - Switch block layer to use kmap_local_page() (Christoph)

   - Remove obsolete disk_name helper (Christoph)

   - block_device refcounting improvements (Christoph)

   - Ensure gendisk always has a request queue reference (Christoph)

   - Misc fixes/cleanups (Shaokun, Oliver, Guoqing)"

* tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits)
  sg: pass the device name to blk_trace_setup
  block, bfq: cleanup the repeated declaration
  blk-crypto: fix check for too-large dun_bytes
  blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
  blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
  block: mark blkdev_fsync static
  block: refine the disk_live check in del_gendisk
  mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA
  mmc: block: Support alternative_gpt_sector() operation
  partitions/efi: Support non-standard GPT location
  block: Add alternative_gpt_sector() operation
  bio: fix page leak bio_add_hw_page failure
  block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT
  block: remove a pointless call to MINOR() in device_add_disk
  null_blk: add error handling support for add_disk()
  virtio_blk: add error handling support for add_disk()
  block: add error handling for device_add_disk / add_disk
  block: return errors from disk_alloc_events
  block: return errors from blk_integrity_add
  block: call blk_register_queue earlier in device_add_disk
  ...
2021-08-30 18:52:11 -07:00
Tejun Heo
0f78399551 Revert "block/mq-deadline: Add cgroup support"
This reverts commit 08a9ad8bf6 ("block/mq-deadline: Add cgroup support")
and a follow-up commit c06bc5a3fb ("block/mq-deadline: Remove a
WARN_ON_ONCE() call"). The added cgroup support has the following issues:

* It breaks cgroup interface file format rule by adding custom elements to a
  nested key-value file.

* It registers mq-deadline as a cgroup-aware policy even though all it's
  doing is collecting per-cgroup stats. Even if we need these stats, this
  isn't the right way to add them.

* It hasn't been reviewed from cgroup side.

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-11 13:47:26 -06:00
Christoph Hellwig
c66fd01971 block: make the block holder code optional
Move the block holder code into a separate file as it is not in any way
related to the other block_dev.c code, and add a new selectable config
option for it so that we don't have to build it without any remapped
drivers selected.

The Kconfig symbol contains a _DEPRECATED suffix to match the comments
added in commit 49731baa41
("block: restore multiple bd_link_disk_holder() support").

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-09 11:50:42 -06:00
Christoph Hellwig
2164877c7f block: remove cmdline-parser.c
cmdline-parser.c is only used by the cmdline faux partition format,
so merge the code into that and avoid an indirect call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210728053756.409654-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
f2542a3be3 scsi: scsi_ioctl: Move the "block layer" SCSI ioctl handling to drivers/scsi
Merge the ioctl handling in block/scsi_ioctl.c into its only caller in
drivers/scsi/scsi_ioctl.c.

Link: https://lore.kernel.org/r/20210724072033.1284840-19-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-28 22:24:27 -04:00
Christoph Hellwig
7801104268 scsi: bsg: Move bsg_scsi_ops to drivers/scsi/
Move the SCSI-specific bsg code in the SCSI midlayer instead of in the
common bsg code.  This just keeps the common bsg code block/ and also
allows building it as a module.

Link: https://lore.kernel.org/r/20210724072033.1284840-15-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-28 22:24:26 -04:00
Christoph Hellwig
d5870edfa3 block: move the disk events code to a separate file
Move the code for handling disk events from genhd.c into a new file
as it isn't very related to the rest of the file while at the same
time requiring lots of forward declarations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210624073843.251178-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24 12:00:22 -06:00
Bart Van Assche
08a9ad8bf6 block/mq-deadline: Add cgroup support
Maintain statistics per cgroup and export these to user space. These
statistics are essential for verifying whether the proper I/O priorities
have been assigned to requests. An example of the statistics data with
this patch applied:

$ cat /sys/fs/cgroup/io.stat
11:2 rbytes=0 wbytes=0 rios=3 wios=0 dbytes=0 dios=0 [NONE] dispatched=0 inserted=0 merged=171 [RT] dispatched=0 inserted=0 merged=0 [BE] dispatched=0 inserted=0 merged=0 [IDLE] dispatched=0 inserted=0 merged=0
8:32 rbytes=2142720 wbytes=0 rios=105 wios=0 dbytes=0 dios=0 [NONE] dispatched=0 inserted=0 merged=171 [RT] dispatched=0 inserted=0 merged=0 [BE] dispatched=0 inserted=0 merged=0 [IDLE] dispatched=0 inserted=0 merged=0

Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-16-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-21 15:03:41 -06:00
Bart Van Assche
556910e392 block: Introduce the ioprio rq-qos policy
Introduce an rq-qos policy that assigns an I/O priority to requests based
on blk-cgroup configuration settings. This policy has the following
advantages over the ioprio_set() system call:
- This policy is cgroup based so it has all the advantages of cgroups.
- While ioprio_set() does not affect page cache writeback I/O, this rq-qos
  controller affects page cache writeback I/O for filesystems that support
  assiociating a cgroup with writeback I/O. See also
  Documentation/admin-guide/cgroup-v2.rst.

Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-5-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-21 15:03:40 -06:00
Christoph Hellwig
c3077b5d97 blk-mq: merge blk-softirq.c into blk-mq.c
__blk_complete_request is only called from the blk-mq code, and
duplicates a lot of code from blk-mq.c.  Move it there to prepare
for better code sharing and simplifications.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:56 -06:00
Satya Tangirala
488f6682c8 block: blk-crypto-fallback for Inline Encryption
Blk-crypto delegates crypto operations to inline encryption hardware
when available. The separately configurable blk-crypto-fallback contains
a software fallback to the kernel crypto API - when enabled, blk-crypto
will use this fallback for en/decryption when inline encryption hardware
is not available.

This lets upper layers not have to worry about whether or not the
underlying device has support for inline encryption before deciding to
specify an encryption context for a bio. It also allows for testing
without actual inline encryption hardware - in particular, it makes it
possible to test the inline encryption code in ext4 and f2fs simply by
running xfstests with the inlinecrypt mount option, which in turn allows
for things like the regular upstream regression testing of ext4 to cover
the inline encryption code paths.

For more details, refer to Documentation/block/inline-encryption.rst.

Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14 09:48:03 -06:00
Satya Tangirala
a892c8d52c block: Inline encryption support for blk-mq
We must have some way of letting a storage device driver know what
encryption context it should use for en/decrypting a request. However,
it's the upper layers (like the filesystem/fscrypt) that know about and
manages encryption contexts. As such, when the upper layer submits a bio
to the block layer, and this bio eventually reaches a device driver with
support for inline encryption, the device driver will need to have been
told the encryption context for that bio.

We want to communicate the encryption context from the upper layer to the
storage device along with the bio, when the bio is submitted to the block
layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can
represent an encryption context (note that we can't use the bi_private
field in struct bio to do this because that field does not function to pass
information across layers in the storage stack). We also introduce various
functions to manipulate the bio_crypt_ctx and make the bio/request merging
logic aware of the bio_crypt_ctx.

We also make changes to blk-mq to make it handle bios with encryption
contexts. blk-mq can merge many bios into the same request. These bios need
to have contiguous data unit numbers (the necessary changes to blk-merge
are also made to ensure this) - as such, it suffices to keep the data unit
number of just the first bio, since that's all a storage driver needs to
infer the data unit number to use for each data block in each bio in a
request. blk-mq keeps track of the encryption context to be used for all
the bios in a request with the request's rq_crypt_ctx. When the first bio
is added to an empty request, blk-mq will program the encryption context
of that bio into the request_queue's keyslot manager, and store the
returned keyslot in the request's rq_crypt_ctx. All the functions to
operate on encryption contexts are in blk-crypto.c.

Upper layers only need to call bio_crypt_set_ctx with the encryption key,
algorithm and data_unit_num; they don't have to worry about getting a
keyslot for each encryption context, as blk-mq/blk-crypto handles that.
Blk-crypto also makes it possible for request-based layered devices like
dm-rq to make use of inline encryption hardware by cloning the
rq_crypt_ctx and programming a keyslot in the new request_queue when
necessary.

Note that any user of the block layer can submit bios with an
encryption context, such as filesystems, device-mapper targets, etc.

Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14 09:47:53 -06:00
Satya Tangirala
1b26283970 block: Keyslot Manager for Inline Encryption
Inline Encryption hardware allows software to specify an encryption context
(an encryption key, crypto algorithm, data unit num, data unit size) along
with a data transfer request to a storage device, and the inline encryption
hardware will use that context to en/decrypt the data. The inline
encryption hardware is part of the storage device, and it conceptually sits
on the data path between system memory and the storage device.

Inline Encryption hardware implementations often function around the
concept of "keyslots". These implementations often have a limited number
of "keyslots", each of which can hold a key (we say that a key can be
"programmed" into a keyslot). Requests made to the storage device may have
a keyslot and a data unit number associated with them, and the inline
encryption hardware will en/decrypt the data in the requests using the key
programmed into that associated keyslot and the data unit number specified
with the request.

As keyslots are limited, and programming keys may be expensive in many
implementations, and multiple requests may use exactly the same encryption
contexts, we introduce a Keyslot Manager to efficiently manage keyslots.

We also introduce a blk_crypto_key, which will represent the key that's
programmed into keyslots managed by keyslot managers. The keyslot manager
also functions as the interface that upper layers will use to program keys
into inline encryption hardware. For more information on the Keyslot
Manager, refer to documentation found in block/keyslot-manager.c and
linux/keyslot-manager.h.

Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14 09:46:54 -06:00
Christoph Hellwig
387048bf67 block: merge partition-generic.c and check.c
Merge block/partition-generic.c and block/partitions/check.c into
a single block/partitions/core.c as the content is closely related
and both files are tiny.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24 07:57:08 -06:00
Linus Torvalds
33c84e89ab SCSI misc on 20200129
This series is slightly unusual because it includes Arnd's compat
 ioctl tree here:
 
 1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
 
 Excluding Arnd's changes, this is mostly an update of the usual
 drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.  There
 are a couple of core and base updates around error propagation and
 atomicity in the attribute container base we use for the SCSI
 transport classes.  The rest is minor changes and updates.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXjHQJyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZZ8AQC02N+v
 iUnTl1YxGPjIWBbnHuUxN2Qbb9D3C6gAT1LkigEArlk163K3A1XEQHF/VNCdAz/f
 01XYTd3p1VHuegIBHlk=
 =Cn52
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series is slightly unusual because it includes Arnd's compat
  ioctl tree here:

    1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue

  Excluding Arnd's changes, this is mostly an update of the usual
  drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.

  There are a couple of core and base updates around error propagation
  and atomicity in the attribute container base we use for the SCSI
  transport classes.

  The rest is minor changes and updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits)
  scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
  scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
  scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
  scsi: hisi_sas: Replace magic number when handle channel interrupt
  scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
  scsi: hisi_sas: use threaded irq to process CQ interrupts
  scsi: ufs: Use UFS device indicated maximum LU number
  scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  scsi: ufs: Inline two functions into their callers
  scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
  scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  scsi: ufs: Delete struct ufs_dev_desc
  scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  scsi: ufs-mediatek: enable low-power mode for hibern8 state
  scsi: ufs: export some functions for vendor usage
  scsi: ufs-mediatek: add dbg_register_dump implementation
  scsi: qla2xxx: Fix a NULL pointer dereference in an error path
  scsi: qla1280: Make checking for 64bit support consistent
  scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
  ...
2020-01-29 18:16:16 -08:00
Herbert Xu
a754bd5f18 block: Allow t10-pi to be modular
Currently t10-pi can only be built into the block layer which via
crc-t10dif pulls in a whole chunk of the Crypto API.  In fact all
users of t10-pi work as modules and there is no reason for it to
always be built-in.

This patch adds a new hidden option for t10-pi that is selected
automatically based on BLK_DEV_INTEGRITY and whether the users
of t10-pi are built-in or not.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-06 20:59:04 -07:00
Arnd Bergmann
bdc1ddad3e compat_ioctl: block: move blkdev_compat_ioctl() into ioctl.c
Having both in the same file allows a number of simplifications
to the compat path, and makes it more likely that changes to
the native path get applied to the compat version as well.

Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03 09:42:52 +01:00
Tejun Heo
1d156646e0 blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT
blkg_rwstat is now only used by bfq-iosched and blk-throtl when on
cgroup1.  Let's move it into its own files and gate it behind a config
option.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 12:28:13 -07:00
Tejun Heo
7caa47151a blkcg: implement blk-iocost
This patchset implements IO cost model based work-conserving
proportional controller.

While io.latency provides the capability to comprehensively prioritize
and protect IOs depending on the cgroups, its protection is binary -
the lowest latency target cgroup which is suffering is protected at
the cost of all others.  In many use cases including stacking multiple
workload containers in a single system, it's necessary to distribute
IO capacity with better granularity.

One challenge of controlling IO resources is the lack of trivially
observable cost metric.  The most common metrics - bandwidth and iops
- can be off by orders of magnitude depending on the device type and
IO pattern.  However, the cost isn't a complete mystery.  Given
several key attributes, we can make fairly reliable predictions on how
expensive a given stream of IOs would be, at least compared to other
IO patterns.

The function which determines the cost of a given IO is the IO cost
model for the device.  This controller distributes IO capacity based
on the costs estimated by such model.  The more accurate the cost
model the better but the controller adapts based on IO completion
latency and as long as the relative costs across differents IO
patterns are consistent and sensible, it'll adapt to the actual
performance of the device.

Currently, the only implemented cost model is a simple linear one with
a few sets of default parameters for different classes of device.
This covers most common devices reasonably well.  All the
infrastructure to tune and add different cost models is already in
place and a later patch will also allow using bpf progs for cost
models.

Please see the top comment in blk-iocost.c and documentation for
more details.

v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix
    for a divide-by-zero bug in current_hweight() triggered by zero
    inuse_sum.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 21:17:12 -06:00
Jens Axboe
f382fb0bce block: remove legacy IO schedulers
Retain the deadline documentation, as that carries over to mq-deadline
as well.

Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Jens Axboe
7ca0192646 block: remove legacy rq tagging
It's now unused, kill it.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Bart Van Assche
bca6b067b0 block: Move power management code into a new source file
Move the code for runtime power management from blk-core.c into the
new source file blk-pm.c. Move the corresponding declarations from
<linux/blkdev.h> into <linux/blk-pm.h>. For CONFIG_PM=n, leave out
the declarations of the functions that are not used in that mode.
This patch not only reduces the number of #ifdefs in the block layer
core code but also reduces the size of header file <linux/blkdev.h>
and hence should help to reduce the build time of the Linux kernel
if CONFIG_PM is not defined.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-26 15:11:28 -06:00
Josef Bacik
d706751215 block: introduce blk-iolatency io controller
Current IO controllers for the block layer are less than ideal for our
use case.  The io.max controller is great at hard limiting, but it is
not work conserving.  This patch introduces io.latency.  You provide a
latency target for your group and we monitor the io in short windows to
make sure we are not exceeding those latency targets.  This makes use of
the rq-qos infrastructure and works much like the wbt stuff.  There are
a few differences from wbt

 - It's bio based, so the latency covers the whole block layer in addition to
   the actual io.
 - We will throttle all IO types that comes in here if we need to.
 - We use the mean latency over the 100ms window.  This is because writes can
   be particularly fast, which could give us a false sense of the impact of
   other workloads on our protected workload.
 - By default there's no throttling, we set the queue_depth to INT_MAX so that
   we can have as many outstanding bio's as we're allowed to.  Only at
   throttle time do we pay attention to the actual queue depth.
 - We backcharge cgroups for root cg issued IO and induce artificial
   delays in order to deal with cases like metadata only or swap heavy
   workloads.

In testing this has worked out relatively well.  Protected workloads
will throttle noisy workloads down to 1 io at time if they are doing
normal IO on their own, or induce up to a 1 second delay per syscall if
they are doing a lot of root issued IO (metadata/swap IO).

Our testing has revolved mostly around our production web servers where
we have hhvm (the web server application) in a protected group and
everything else in another group.  We see slightly higher requests per
second (RPS) on the test tier vs the control tier, and much more stable
RPS across all machines in the test tier vs the control tier.

Another test we run is a slow memory allocator in the unprotected group.
Before this would eventually push us into swap and cause the whole box
to die and not recover at all.  With these patches we see slight RPS
drops (usually 10-15%) before the memory consumer is properly killed and
things recover within seconds.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:54 -06:00
Josef Bacik
a79050434b blk-rq-qos: refactor out common elements of blk-wbt
blkcg-qos is going to do essentially what wbt does, only on a cgroup
basis.  Break out the common code that will be shared between blkcg-qos
and wbt into blk-rq-qos.* so they can both utilize the same
infrastructure.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:54 -06:00
Bart Van Assche
6a5ac98465 block: Make struct request_queue smaller for CONFIG_BLK_DEV_ZONED=n
Exclude zoned block device members from struct request_queue for
CONFIG_BLK_DEV_ZONED == n. Avoid breaking the build by only building
the code that uses these struct request_queue members if
CONFIG_BLK_DEV_ZONED != n.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:52 -06:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Sagi Grimberg
24c5dc6610 block: Add rdma affinity based queue mapping helper
Like pci and virtio, we add a rdma helper for affinity
spreading. This achieves optimal mq affinity assignments
according to the underlying rdma device affinity maps.

Reviewed-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-08 14:58:03 -04:00
Paolo Valente
ea25da4808 block, bfq: split bfq-iosched.c into multiple source files
The BFQ I/O scheduler features an optimal fair-queuing
(proportional-share) scheduling algorithm, enriched with several
mechanisms to boost throughput and reduce latency for interactive and
real-time applications. This makes BFQ a large and complex piece of
code. This commit addresses this issue by splitting BFQ into three
main, independent components, and by moving each component into a
separate source file:
1. Main algorithm: handles the interaction with the kernel, and
decides which requests to dispatch; it uses the following two further
components to achieve its goals.
2. Scheduling engine (Hierarchical B-WF2Q+ scheduling algorithm):
computes the schedule, using weights and budgets provided by the above
component.
3. cgroups support: handles group operations (creation, destruction,
move, ...).

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19 08:48:24 -06:00
Paolo Valente
aee69d78de block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler
We tag as v0 the version of BFQ containing only BFQ's engine plus
hierarchical support. BFQ's engine is introduced by this commit, while
hierarchical support is added by next commit. We use the v0 tag to
distinguish this minimal version of BFQ from the versions containing
also the features and the improvements added by next commits. BFQ-v0
coincides with the version of BFQ submitted a few years ago [1], apart
from the introduction of preemption, described below.

BFQ is a proportional-share I/O scheduler, whose general structure,
plus a lot of code, are borrowed from CFQ.

- Each process doing I/O on a device is associated with a weight and a
  (bfq_)queue.

- BFQ grants exclusive access to the device, for a while, to one queue
  (process) at a time, and implements this service model by
  associating every queue with a budget, measured in number of
  sectors.

  - After a queue is granted access to the device, the budget of the
    queue is decremented, on each request dispatch, by the size of the
    request.

  - The in-service queue is expired, i.e., its service is suspended,
    only if one of the following events occurs: 1) the queue finishes
    its budget, 2) the queue empties, 3) a "budget timeout" fires.

    - The budget timeout prevents processes doing random I/O from
      holding the device for too long and dramatically reducing
      throughput.

    - Actually, as in CFQ, a queue associated with a process issuing
      sync requests may not be expired immediately when it empties. In
      contrast, BFQ may idle the device for a short time interval,
      giving the process the chance to go on being served if it issues
      a new request in time. Device idling typically boosts the
      throughput on rotational devices, if processes do synchronous
      and sequential I/O. In addition, under BFQ, device idling is
      also instrumental in guaranteeing the desired throughput
      fraction to processes issuing sync requests (see [2] for
      details).

      - With respect to idling for service guarantees, if several
        processes are competing for the device at the same time, but
        all processes (and groups, after the following commit) have
        the same weight, then BFQ guarantees the expected throughput
        distribution without ever idling the device. Throughput is
        thus as high as possible in this common scenario.

  - Queues are scheduled according to a variant of WF2Q+, named
    B-WF2Q+, and implemented using an augmented rb-tree to preserve an
    O(log N) overall complexity.  See [2] for more details. B-WF2Q+ is
    also ready for hierarchical scheduling. However, for a cleaner
    logical breakdown, the code that enables and completes
    hierarchical support is provided in the next commit, which focuses
    exactly on this feature.

  - B-WF2Q+ guarantees a tight deviation with respect to an ideal,
    perfectly fair, and smooth service. In particular, B-WF2Q+
    guarantees that each queue receives a fraction of the device
    throughput proportional to its weight, even if the throughput
    fluctuates, and regardless of: the device parameters, the current
    workload and the budgets assigned to the queue.

  - The last, budget-independence, property (although probably
    counterintuitive in the first place) is definitely beneficial, for
    the following reasons:

    - First, with any proportional-share scheduler, the maximum
      deviation with respect to an ideal service is proportional to
      the maximum budget (slice) assigned to queues. As a consequence,
      BFQ can keep this deviation tight not only because of the
      accurate service of B-WF2Q+, but also because BFQ *does not*
      need to assign a larger budget to a queue to let the queue
      receive a higher fraction of the device throughput.

    - Second, BFQ is free to choose, for every process (queue), the
      budget that best fits the needs of the process, or best
      leverages the I/O pattern of the process. In particular, BFQ
      updates queue budgets with a simple feedback-loop algorithm that
      allows a high throughput to be achieved, while still providing
      tight latency guarantees to time-sensitive applications. When
      the in-service queue expires, this algorithm computes the next
      budget of the queue so as to:

      - Let large budgets be eventually assigned to the queues
        associated with I/O-bound applications performing sequential
        I/O: in fact, the longer these applications are served once
        got access to the device, the higher the throughput is.

      - Let small budgets be eventually assigned to the queues
        associated with time-sensitive applications (which typically
        perform sporadic and short I/O), because, the smaller the
        budget assigned to a queue waiting for service is, the sooner
        B-WF2Q+ will serve that queue (Subsec 3.3 in [2]).

- Weights can be assigned to processes only indirectly, through I/O
  priorities, and according to the relation:
  weight = 10 * (IOPRIO_BE_NR - ioprio).
  The next patch provides, instead, a cgroups interface through which
  weights can be assigned explicitly.

- If several processes are competing for the device at the same time,
  but all processes and groups have the same weight, then BFQ
  guarantees the expected throughput distribution without ever idling
  the device. It uses preemption instead. Throughput is then much
  higher in this common scenario.

- ioprio classes are served in strict priority order, i.e.,
  lower-priority queues are not served as long as there are
  higher-priority queues.  Among queues in the same class, the
  bandwidth is distributed in proportion to the weight of each
  queue. A very thin extra bandwidth is however guaranteed to the Idle
  class, to prevent it from starving.

- If the strict_guarantees parameter is set (default: unset), then BFQ
     - always performs idling when the in-service queue becomes empty;
     - forces the device to serve one I/O request at a time, by
       dispatching a new request only if there is no outstanding
       request.
  In the presence of differentiated weights or I/O-request sizes,
  both the above conditions are needed to guarantee that every
  queue receives its allotted share of the bandwidth (see
  Documentation/block/bfq-iosched.txt for more details). Setting
  strict_guarantees may evidently affect throughput.

[1] https://lkml.org/lkml/2008/4/1/234
    https://lkml.org/lkml/2008/11/11/148

[2] P. Valente and M. Andreolini, "Improving Application
    Responsiveness with the BFQ Disk I/O Scheduler", Proceedings of
    the 5th Annual International Systems and Storage Conference
    (SYSTOR '12), June 2012.
    Slightly extended version:
    http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-
							results.pdf

Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19 08:29:02 -06:00
Omar Sandoval
00e043936e blk-mq: introduce Kyber multiqueue I/O scheduler
The Kyber I/O scheduler is an I/O scheduler for fast devices designed to
scale to multiple queues. Users configure only two knobs, the target
read and synchronous write latencies, and the scheduler tunes itself to
achieve that latency goal.

The implementation is based on "tokens", built on top of the scalable
bitmap library. Tokens serve as a mechanism for limiting requests. There
are two tiers of tokens: queueing tokens and dispatch tokens.

A queueing token is required to allocate a request. In fact, these
tokens are actually the blk-mq internal scheduler tags, but the
scheduler manages the allocation directly in order to implement its
policy.

Dispatch tokens are device-wide and split up into two scheduling
domains: reads vs. writes. Each hardware queue dispatches batches
round-robin between the scheduling domains as long as tokens are
available for that domain.

These tokens can be used as the mechanism to enable various policies.
The policy Kyber uses is inspired by active queue management techniques
for network routing, similar to blk-wbt. The scheduler monitors
latencies and scales the number of dispatch tokens accordingly. Queueing
tokens are used to prevent starvation of synchronous requests by
asynchronous requests.

Various extensions are possible, including better heuristics and ionice
support. The new scheduler isn't set as the default yet.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 14:06:58 -06:00
Linus Torvalds
54d7989f47 virtio, vhost: optimizations, fixes
Looks like a quiet cycle for vhost/virtio, just a couple of minor
 tweaks. Most notable is automatic interrupt affinity for blk and scsi.
 Hopefully other devices are not far behind.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYt1rRAAoJECgfDbjSjVRpEZsIALSHevdXWtRHBZUb0ZkqPLQb
 /x2Vn49CcALS1p7iSuP9L027MPeaLKyr0NBT9hptBChp/4b9lnZWyyAo6vYQrzfx
 Ia/hLBYsK4ml6lEwbyfLwqkF2cmYCrZhBSVAILifn84lTPoN7CT0PlYDfA+OCaNR
 geo75qF8KR+AUO0aqchwMRL3RV3OxZKxQr2AR6LttCuhiBgnV3Xqxffg/M3x6ONM
 0ffFFdodm6slem3hIEiGUMwKj4NKQhcOleV+y0fVBzWfLQG9210pZbQyRBRikIL0
 7IsaarpaUr7OrLAZFMGF6nJnyRAaRrt6WknTHZkyvyggrePrGcmGgPm4jrODwY4=
 =2zwv
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull vhost updates from Michael Tsirkin:
 "virtio, vhost: optimizations, fixes

  Looks like a quiet cycle for vhost/virtio, just a couple of minor
  tweaks. Most notable is automatic interrupt affinity for blk and scsi.
  Hopefully other devices are not far behind"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-console: avoid DMA from stack
  vhost: introduce O(1) vq metadata cache
  virtio_scsi: use virtio IRQ affinity
  virtio_blk: use virtio IRQ affinity
  blk-mq: provide a default queue mapping for virtio device
  virtio: provide a method to get the IRQ affinity mask for a virtqueue
  virtio: allow drivers to request IRQ affinity when creating VQs
  virtio_pci: simplify MSI-X setup
  virtio_pci: don't duplicate the msix_enable flag in struct pci_dev
  virtio_pci: use shared interrupts for virtqueues
  virtio_pci: remove struct virtio_pci_vq_info
  vhost: try avoiding avail index access when getting descriptor
  virtio_mmio: expose header to userspace
2017-03-02 13:53:13 -08:00
Christoph Hellwig
73473427bb blk-mq: provide a default queue mapping for virtio device
Similar to the PCI version, just calling into virtio instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-27 20:54:05 +02:00
Jens Axboe
818551e2b2 Merge branch 'for-4.11/next' into for-4.11/linus-merge
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 14:08:19 -07:00
Scott Bauer
455a7b238c block: Add Sed-opal library
This patch implements the necessary logic to bring an Opal
enabled drive out of a factory-enabled into a working
Opal state.

This patch set also enables logic to save a password to
be replayed during a resume from suspend.

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06 09:44:19 -07:00
Christoph Hellwig
72148aecf4 block: make scsi_request and scsi ioctl support optional
We only need this code to support scsi, ide, cciss and virtio.  And at
least for virtio it's a deprecated feature to start with.

This should shrink the kernel size for embedded device that only use,
say eMMC a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 10:53:05 -07:00
Omar Sandoval
400f73b23f blk-mq: fix debugfs compilation issues
This fixes a couple of problems:

1. In the !CONFIG_DEBUG_FS case, the stub definitions were bogus.
2. In the !CONFIG_BLOCK case, blk-mq-debugfs.c shouldn't be compiled at
   all.

Fix the stub definitions and add a CONFIG_BLK_DEBUG_FS Kconfig option.

Fixes: 07e4fead45 ("blk-mq: create debugfs directory tree")
Signed-off-by: Omar Sandoval <osandov@fb.com>

Augment Kconfig description.

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:03:01 -07:00
Omar Sandoval
07e4fead45 blk-mq: create debugfs directory tree
In preparation for putting blk-mq debugging information in debugfs,
create a directory tree mirroring the one in sysfs:

    # tree -d /sys/kernel/debug/block
    /sys/kernel/debug/block
    |-- nvme0n1
    |   `-- mq
    |       |-- 0
    |       |   `-- cpu0
    |       |-- 1
    |       |   `-- cpu1
    |       |-- 2
    |       |   `-- cpu2
    |       `-- 3
    |           `-- cpu3
    `-- vda
        `-- mq
            `-- 0
                |-- cpu0
                |-- cpu1
                |-- cpu2
                `-- cpu3

Also add the scaffolding for the actual files that will go in here,
either under the hardware queue or software queue directories.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 08:17:44 -07:00
Jens Axboe
945ffb60c1 mq-deadline: add blk-mq adaptation of the deadline IO scheduler
This is basically identical to deadline-iosched, except it registers
as a MQ capable scheduler. This is still a single queue design.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17 10:04:25 -07:00