There is this warning when using a kernel with the address sanitizer
and running this testsuite:
https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid
==================================================================
BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid]
Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319
CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x9c
print_address_description.constprop.0+0x1f/0x1e0
print_report.cold+0x55/0x244
kasan_report+0xc9/0x100
raid_status+0x1747/0x2820 [dm_raid]
dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod]
table_load+0x35c/0x630 [dm_mod]
ctl_ioctl+0x411/0x630 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
__x64_sys_ioctl+0x12a/0x1a0
do_syscall_64+0x5b/0x80
The warning is caused by reading conf->max_nr_stripes in raid_status. The
code in raid_status reads mddev->private, casts it to struct r5conf and
reads the entry max_nr_stripes.
However, if we have different raid type than 4/5/6, mddev->private
doesn't point to struct r5conf; it may point to struct r0conf, struct
r1conf, struct r10conf or struct mpconf. If we cast a pointer to one
of these structs to struct r5conf, we will be reading invalid memory
and KASAN warns about it.
Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
pr_preempt has a similar issue as reserve where for all the
reservation types except the All Registrants ones the preempt can
create a reservation. And a follow up reservation or release needs to
go down the same path the preempt did. This has the pr_preempt work
like reserve and release where we always start from the first path in
the first group.
This commit has been tested with windows failover clustering's
validation test and libiscsi's PGR tests to check for regressions.
They both don't have tests to verify this case, so I tested it
manually.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This commit fixes a bug where we are leaving the reservation in place
even though pr_release has run and returned success.
If we have a Write Exclusive, Exclusive Access, or Write/Exclusive
Registrants only reservation, the release must be sent down the path
that is the reservation holder. The problem is multipath_prepare_ioctl
most likely selected path N for the reservation, then later when we do
the release multipath_prepare_ioctl will select a completely different
path. The device will then return success becuase the nvme and scsi
specs say to return success if there is no reservation or if the
release is sent down from a path that is not the holder. We then think
we have released the reservation.
This commit has us loop over each path and send a release so we can
make sure the release is executed on the correct path. It has been
tested with windows failover clustering's validation test which checks
this case, and it has been tested manually (the libiscsi PGR tests
don't have a test case for this yet, but I will be adding one).
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
When an app does a pr_reserve it will go to whatever path we happen to
be using at the time. This can result in errors when the app does a
second pr_reserve call and expects success but gets a failure because
the reserve is not done on the holder's path. This commit has us
always start trying to do reserves from the first path in the first
group.
Windows failover clustering will produce the type of pattern above.
With this commit, we will now pass its validation test for this case.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The specs state that if you send a reserve down a path that is already
the holder success must be returned and if it goes down a path that
is not the holder reservation conflict must be returned. Windows
failover clustering will send a second reservation and expects that a
device returns success. The problem for multipathing is that for an
All Registrants reservation, we can send the reserve down any path but
for all other reservation types there is one path that is the holder.
To handle this we could add PR state to dm but that can get nasty.
Look at target_core_pr.c for an example of the type of things we'd
have to track. It will also get more complicated because other
initiators can change the state so we will have to add in async
event/sense handling.
This commit, and the 3 commits that follow, tries to keep dm simple
and keep just doing passthrough. This commit modifies dm_call_pr to be
able to find the first usable path that can execute our pr_op then
return. When dm_pr_reserve is converted to dm_call_pr in the next
commit for the normal case we will use the same path for every
reserve.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Otherwise PR ops may be issued while the broader DM device is being
reconfigured, etc.
Fixes: 9c72bad1f3 ("dm: call PR reserve/unreserve on each underlying device")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLaEtsQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjuZD/4joqo0PVz+O5MUadOmFxQ+Js2RCzxzDYwN
rfTlzsS2ybcoG2ehs3TPGU2c3Q+vODcgFOLJtrKPsyxEZM49uuu7+romi9/jxW4P
Pju8DmA0037elEGmml4i3EiMoIGyz1ScXFpR2Ii+LLTD6y7hNxHYxC/6PgWWaO59
gIydFz9PenJmz+orlpRI08vkvifdaCCdFfqgnP+KtvJsee2FPUdg2xpA021a1Tzj
7u1qPS1JnylQP1VQypqXnZTiHzmzmkQL4GNQIo/pje/RBstTFb3HOPXEoeVvQKrl
WjNntc80LZvYCMBzcksDkGAT8YLxXOckKvDiaYGObIoEoh/K6E7CBoIo4Smu3mwr
NqoaN3jZXnfTtZ40VEnxI6HnIbXG8Jc96P0/7Us3lL/W/wP0fD4fqNlumbkeMW2d
ualU91J6+YTGrYYWClSTSNyWQF/MNr1XRL9LQiO4GDs0fkIL1WoxaY/+AnUp0Jcc
PF8tm83852PcP+YJOOYgXD04gBmg2JCOrdarE87x+fIKp2Z7V4HPeR/hH5iOu9F3
CbXaBTICJlo7jmVUMKMh5yXvTyx4TqDvpWGbpQweXG4t8c77TPMI2cIHVdj1yqgj
L015BORXfsWnI0yX4IA32RqcoNwZHrrb930OxGDvUlxTrjfodlaLypYJ1wDKwRMi
H8LTxE6igA==
=zviX
-----END PGP SIGNATURE-----
Merge tag 'block-5.19-2022-07-21' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a single fix for missing error propagation for an allocation
failure in raid5"
* tag 'block-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
md/raid5: missing error code in setup_conf()
Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2.
The patchset fsdax-rmap is aimed to support shared pages tracking for
fsdax.
It moves owner tracking from dax_assocaite_entry() to pmem device driver,
by introducing an interface ->memory_failure() for struct pagemap. This
interface is called by memory_failure() in mm, and implemented by pmem
device.
Then call holder operations to find the filesystem which the corrupted
data located in, and call filesystem handler to track files or metadata
associated with this page.
Finally we are able to try to fix the corrupted data in filesystem and do
other necessary processing, such as killing processes who are using the
files affected.
The call trace is like this:
memory_failure()
|* fsdax case
|------------
|pgmap->ops->memory_failure() => pmem_pgmap_memory_failure()
| dax_holder_notify_failure() =>
| dax_device->holder_ops->notify_failure() =>
| - xfs_dax_notify_failure()
| |* xfs_dax_notify_failure()
| |--------------------------
| | xfs_rmap_query_range()
| | xfs_dax_failure_fn()
| | * corrupted on metadata
| | try to recover data, call xfs_force_shutdown()
| | * corrupted on file data
| | try to recover data, call mf_dax_kill_procs()
|* normal case
|-------------
|mf_generic_kill_procs()
The patchset fsdax-reflink attempts to add CoW support for fsdax, and
takes XFS, which has both reflink and fsdax features, as an example.
One of the key mechanisms needed to be implemented in fsdax is CoW. Copy
the data from srcmap before we actually write data to the destination
iomap. And we just copy range in which data won't be changed.
Another mechanism is range comparison. In page cache case, readpage() is
used to load data on disk to page cache in order to be able to compare
data. In fsdax case, readpage() does not work. So, we need another
compare data with direct access support.
With the two mechanisms implemented in fsdax, we are able to make reflink
and fsdax work together in XFS.
This patch (of 14):
To easily track filesystem from a pmem device, we introduce a holder for
dax_device structure, and also its operation. This holder is used to
remember who is using this dax_device:
- When it is the backend of a filesystem, the holder will be the
instance of this filesystem.
- When this pmem device is one of the targets in a mapped device, the
holder will be this mapped device. In this case, the mapped device
has its own dax_device and it will follow the first rule. So that we
can finally track to the filesystem we needed.
The holder and holder_ops will be set when filesystem is being mounted,
or an target device is being activated.
Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.wiliams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fault inject on pool metadata device reports:
BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950
CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_address_description.constprop.0.cold+0xeb/0x3f4
kasan_report.cold+0xe6/0x147
dm_pool_register_metadata_threshold+0x40/0x80
pool_ctr+0xa0a/0x1150
dm_table_add_target+0x2c8/0x640
table_load+0x1fd/0x430
ctl_ioctl+0x2c4/0x5a0
dm_ctl_ioctl+0xa/0x10
__x64_sys_ioctl+0xb3/0xd0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This can be easily reproduced using:
echo offline > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10
dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0"
If a metadata commit fails, the transaction will be aborted and the
metadata space maps will be destroyed. If a DM table reload then
happens for this failed thin-pool, a use-after-free will occur in
dm_sm_register_threshold_callback (called from
dm_pool_register_metadata_threshold).
Fix this by in dm_pool_register_metadata_threshold() by returning the
-EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr()
with a new error message: "Error registering metadata threshold".
Fixes: ac8c3f3df6 ("dm thin: generate event when metadata threshold passed")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Change dm-writecache, so that it counts the number of blocks discarded
instead of the number of discard bios. Make it consistent with the
read and write statistics counters that were changed to count the
number of blocks instead of bios.
Fixes: e3a35d0340 ("dm writecache: add event counters")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Change dm-writecache, so that it counts the number of blocks written
instead of the number of write bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
Fixes: e3a35d0340 ("dm writecache: add event counters")
Reported-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Change dm-writecache, so that it counts the number of blocks read
instead of the number of read bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
Fixes: e3a35d0340 ("dm writecache: add event counters")
Reported-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The functions writecache_map_remap_origin and writecache_bio_copy_ssd
only return a single value, thus they can be made to return void.
This helps simplify the following IO accounting changes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm-kcopyd doesn't access the allocated pages directly, it only passes
them to dm-io which adds them to a bio list - thus, we can allocate
the pages from high memory. This will reduce pressure on the low
memory when there are a large number of kcopyd jobs in progress.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm-writecache has the capability to limit the number of writeback jobs
in progress. However, this feature was off by default. As such there
were some out-of-memory crashes observed when lowering the low
watermark while the cache is full.
This commit enables writeback limit by default. It is set to 256MiB or
1/16 of total system memory, whichever is smaller.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Both submit_bh() and ll_rw_block() accept a request operation type and
request flags as their first two arguments. Micro-optimize these two
functions by combining these first two arguments into a single argument.
This patch does not change the behavior of any of the modified code.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Song Liu <song@kernel.org> (for the md changes)
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-48-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-37-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for
variables that represent a request flags.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-36-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for
variables that represent request flags.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-35-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve uniformity in the kernel of handling of request operation and
flags by passing these as a single argument.
Cc: Coly Li <colyli@suse.de>
Cc: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-34-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve uniformity in the kernel of handling of request operation and
flags by passing these as a single argument.
Cc: Coly Li <colyli@suse.de>
Cc: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-33-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve uniformity in the kernel of handling of request operation and
flags by passing these as a single argument.
Cc: Song Liu <song@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the enum req_op type for arguments
that represent a request operation.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-31-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the enum req_op type for request operations instead of unsigned int.
This patch fixes a sparse warning that has been introduced by making
enum req_op __bitwise.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-30-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the request operation and its flags as a single argument to improve
kernel code uniformity.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-29-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for a function
argument that represents a request operation type.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-28-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Combine the request operation type and request flags into a single
argument. Improve static type checking by using the enum req_op type for
variables that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-27-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_opf_t type for structure members that represent request
flags.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-26-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using type 'enum req_op' instead of 'int'.
Make the role of the 'rw' arguments more clear by renaming these into
'op' (operation). This patch does not change any functionality since
REQ_OP_READ = READ = 0 and REQ_OP_WRITE = WRITE = 1.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Heinz Mauelshagen <heinzm@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-25-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve kernel code uniformity by combining the request operation type and
flags into a single variable. Change 'int rw' into 'enum req_op op' because
the name 'op' is what is used in the block layer to hold a request type.
Use the blk_opf_t and enum req_op types where appropriate to improve static
type checking.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-24-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The member name 'rw' suggests that this member either has the value 'READ'
or 'WRITE' and no other values. Since that member also can have the value
REQ_OP_WRITE_ZEROES, rename 'rw' into 'op'. This patch does not change any
functionality since REQ_OP_READ = READ = 0 and REQ_OP_WRITE = WRITE = 1.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-23-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Combine the bi_op and bi_op_flags into the bi_opf member. Use the new
blk_opf_t type to improve static type checking. This patch does not
change any functionality.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-22-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by changing the type of the value returned by
req_op() and bio_op() from unsigned int into enum req_op. Insert
'default: break;' in switch statements on the enum req_op type to prevent
that the compiler warns about these switch statements.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-5-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf09 ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the remaining calls of bdevname with snprintf using the %pg
format specifier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The verity glue for LoadPin is only needed when CONFIG_SECURITY_LOADPIN_VERITY
is set, use this option for conditional compilation instead of the combo of
CONFIG_DM_VERITY and CONFIG_SECURITY_LOADPIN.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/lkml/20220627083512.v7.3.I5aca2dcc3b06de4bf53696cd21329dce8272b8aa@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
LoadPin limits loading of kernel modules, firmware and certain
other files to a 'pinned' file system (typically a read-only
rootfs). To provide more flexibility LoadPin is being extended
to also allow loading these files from trusted dm-verity
devices. For that purpose LoadPin can be provided with a list
of verity root digests that it should consider as trusted.
Add a bunch of helpers to allow LoadPin to check whether a DM
device is a trusted verity device. The new functions broadly
fall in two categories: those that need access to verity
internals (like the root digest), and the 'glue' between
LoadPin and verity. The new file dm-verity-loadpin.c contains
the glue functions.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/lkml/20220627083512.v7.1.I3e928575a23481121e73286874c4c2bdb403355d@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
Resolves: ERROR: else should follow close brace '}'
Signed-off-by: JeongHyeon Lee <jhs2.lee@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Rename from "tgt" to "ti" so that all of dm-table.c code uses the same
naming for dm_target variables.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
All callers of dm_table_get_target() are expected to do proper bounds
checking on the index they pass.
Move dm_table_get_target() to dm-core.h to make it extra clear that only
DM core code should be using it. Switch it to be inlined while at it.
Standardize all DM core callers to use the same for loop pattern and
make associated variables as local as possible. Rename some variables
(e.g. s/table/t/ and s/tgt/ti/) along the way.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
More efficient and readable to just access table->num_targets directly.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit 61b6e2e532 ("dm: fix BLK_STS_DM_REQUEUE handling when dm_io
represents split bio") reverted DM core's bio splitting back to using
bio_split()+bio_chain() because it was found that otherwise DM's
BLK_STS_DM_REQUEUE would trigger a live-lock waiting for bio
completion that would never occur.
Restore using bio_trim()+bio_inc_remaining(), like was done in commit
7dd76d1fee ("dm: improve bio splitting and associated IO
accounting"), but this time with proper handling for the above
scenario that is covered in more detail in the commit header for
61b6e2e532.
Solve this issue by adding a two staged dm_io requeue mechanism that
uses the new dm_bio_rewind() via dm_io_rewind():
1) requeue the dm_io into the requeue_list added to struct
mapped_device, and schedule it via new added requeue work. This
workqueue just clones the dm_io->orig_bio (which DM saves and
ensures its end sector isn't modified). dm_io_rewind() uses the
sectors and sectors_offset members of the dm_io that are recorded
relative to the end of orig_bio: dm_bio_rewind()+bio_trim() are
then used to make that cloned bio reflect the subset of the
original bio that is represented by the dm_io that is being
requeued.
2) the 2nd stage requeue is same with original requeue, but
io->orig_bio points to new cloned bio (which matches the requeued
dm_io as described above).
This allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit 7759eb23fd ("block: remove bio_rewind_iter()") removed
a similar API for the following reasons:
```
It is pointed that bio_rewind_iter() is one very bad API[1]:
1) bio size may not be restored after rewinding
2) it causes some bogus change, such as 5151842b9d (block: reset
bi_iter.bi_done after splitting bio)
3) rewinding really makes things complicated wrt. bio splitting
4) unnecessary updating of .bi_done in fast path
[1] https://marc.info/?t=153549924200005&r=1&w=2
So this patch takes Kent's suggestion to restore one bio into its original
state via saving bio iterator(struct bvec_iter) in bio_integrity_prep(),
given now bio_rewind_iter() is only used by bio integrity code.
```
However, saving off a copy of the 32 bytes bio->bi_iter in case rewind
needed isn't efficient because it bloats per-bio-data for what is an
unlikely case. That suggestion also ignores the need to restore
crypto and integrity info.
Add dm_bio_rewind() API for a specific use-case that is much more narrow
than the previous more generic rewind code that was reverted:
1) most bios have a fixed end sector since bio split is done from front
of the bio, if driver just records how many sectors between current
bio's start sector and the original bio's end sector, the original
position can be restored. Keeping the original bio's end sector
fixed is a _hard_ requirement for this interface!
2) if a bio's end sector won't change (usually bio_trim() isn't
called, or in the case of DM it preserves original bio), user can
restore the original position by storing sector offset from the
current ->bi_iter.bi_sector to bio's end sector; together with
saving bio size, only 8 bytes is needed to restore to original
bio.
3) DM's requeue use case: when BLK_STS_DM_REQUEUE happens, DM core
needs to restore to an "original bio" which represents the current
dm_io to be requeued (which may be a subset of the original bio).
By storing the sector offset from the original bio's end sector and
dm_io's size, dm_bio_rewind() can restore such original bio. See
commit 7dd76d1fee ("dm: improve bio splitting and associated IO
accounting") for more details on how DM does this. Leveraging this,
allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).
4) Unlike the original rewind API, dm_bio_rewind() doesn't add .bi_done
to bvec_iter and there is no effect on the fast path.
Implement dm_bio_rewind() by factoring out clear helpers that it calls:
dm_bio_integrity_rewind, dm_bio_crypt_rewind and dm_bio_rewind_iter.
DM is able to ensure that dm_bio_rewind() is used safely but, given
the constraint that the bio's end must never change, other
hypothetical future callers may not take the same care. So make
dm_bio_rewind() and all supporting code local to DM to avoid risk of
hypothetical abuse. A "dm_" prefix was added to all functions to avoid
any namespace collisions.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API and are only used for non-passthrough I/O that requires
the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bdev based helpers where applicable and move the zoned_dev
into the scope where it is actually used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a block_device instead of a request_queue as that is what most
callers have at hand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bdev_is_zoned in all places where a block_device is available instead
of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
There's a KASAN warning in raid5_remove_disk when running the LVM
testsuite. We fix this warning by verifying that the "number" variable is
within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If either BLK_STS_DM_REQUEUE or BLK_STS_AGAIN is returned for POLLED
io, we requeue the original bio into deferred list and kick md->wq to
re-submit it to block layer.
Improve the handling in the following way:
1) Factor out dm_handle_requeue() for handling dm_io requeue.
2) Unify handling for BLK_STS_DM_REQUEUE and BLK_STS_AGAIN: clear
REQ_POLLED for BLK_STS_DM_REQUEUE too, for the sake of simplicity,
given BLK_STS_DM_REQUEUE is very unusual.
3) Queue md->wq explicitly in dm_handle_requeue(), so requeue handling
becomes more robust.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The current split between dm_table_alloc_md_mempools and
dm_alloc_md_mempools is rather arbitrary, so merge the two
into one easy to follow function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm_get_reserved_rq_based_ios is only used in the core dm code, so
remove the export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.
In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)
When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.
Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().
The out-of-bounds memory accesses was discovered using KASAN.
This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
max_io_len always passes an explicitly non-zero chunk_sectors into
blk_max_size_offset. That means much of blk_max_size_offset is not
needed and can be open coded to simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220614090934.570632-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 85e123c27d ("dm mirror log: round up region bitmap size to
BITS_PER_LONG") introduced a regression on 64-bit architectures in the
lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation.
If the device is shrunk, we need to clear log bits beyond the end of the
device. The code clears bits up to a 32-bit boundary and then calculates
lc->sync_count by summing set bits up to a 64-bit boundary (the commit
changed that; previously, this boundary was 32-bit too). So, it was using
some non-zeroed bits in the calculation and this caused misbehavior.
Fix this regression by clearing bits up to BITS_PER_LONG boundary.
Fixes: 85e123c27d ("dm mirror log: round up region bitmap size to BITS_PER_LONG")
Cc: stable@vger.kernel.org
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit 7dd76d1fee ("dm: improve bio splitting and associated IO
accounting") removed using cloned bio when dm io splitting is needed.
Using bio_trim()+bio_inc_remaining() rather than bio_split()+bio_chain()
causes multiple dm_io instances to share the same original bio, and it
works fine if IOs are completed successfully.
But a regression was caused for the case when BLK_STS_DM_REQUEUE is
returned from any one of DM's cloned bios (whose dm_io share the same
orig_bio). In this BLK_STS_DM_REQUEUE case only the mapped subset of
the original bio for the current exact dm_io needs to be re-submitted.
However, since the original bio is shared among all dm_io instances,
the ->orig_bio actually only represents the last dm_io instance, so
requeue can't work as expected. Also when more than one dm_io is
requeued, the same original bio is requeued from all dm_io's
completion handler, then race is caused.
Fix this issue by still allocating one clone bio for completing io
only, then io accounting can rely on ->orig_bio being unmodified. This
is needed because the dm_io's sector_offset and sectors members are
recorded relative to an unmodified ->orig_bio.
In the future, we can go back to using bio_trim()+bio_inc_remaining()
for dm's io splitting but then delay needing a bio clone only when
handling BLK_STS_DM_REQUEUE, but that approach is a bit complicated
(so it needs a development cycle):
1) bio clone needs to be done in task context
2) a block interface for unwinding bio is required
Fixes: 7dd76d1fee ("dm: improve bio splitting and associated IO accounting")
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit 5291984004 ("dm: fix bio polling to handle possibile
BLK_STS_AGAIN") inadvertently introduced an early return from
dm_io_complete() without first queueing the bio to DM if BLK_STS_AGAIN
occurs and bio-polling is _not_ being used.
Fix this by only returning early from dm_io_complete() if the bio has
first been properly queued to DM. Otherwise, the bio will never finish
via bio_endio.
Fixes: 5291984004 ("dm: fix bio polling to handle possibile BLK_STS_AGAIN")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5gxO
-----END PGP SIGNATURE-----
Merge tag 'block-5.19-2022-06-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- Quirks, quirks, quirks to work around buggy consumer grade
devices (Keith Bush, Ning Wang, Stefan Reiter, Rasheed Hsueh)
- Better kernel messages for devices that need quirking (Keith
Bush)
- Make a kernel message more useful (Thomas Weißschuh)
- MD pull request from Song, with a few fixes
- blk-mq sysfs locking fixes (Ming)
- BFQ stats fix (Bart)
- blk-mq offline queue fix (Bart)
- blk-mq flush request tag fix (Ming)
* tag 'block-5.19-2022-06-16' of git://git.kernel.dk/linux-block:
block/bfq: Enable I/O statistics
blk-mq: don't clear flush_rq from tags->rqs[]
blk-mq: avoid to touch q->elevator without any protection
blk-mq: protect q->elevator by ->sysfs_lock in blk_mq_elv_switch_none
block: Fix handling of offline queues in blk_mq_alloc_request_hctx()
md/raid5-ppl: Fix argument order in bio_alloc_bioset()
Revert "md: don't unregister sync_thread with reconfig_mutex held"
nvme-pci: disable write zeros support on UMIC and Samsung SSDs
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs
nvme-pci: sk hynix p31 has bogus namespace ids
nvme-pci: smi has bogus namespace ids
nvme-pci: phison e12 has bogus namespace ids
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S50
nvme-pci: add trouble shooting steps for timeouts
nvme: add bug report info for global duplicate id
nvme: add device name to warning in uuid_show()
The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.
Fix this bug by rounding up bitset_size to BITS_PER_LONG.
This bug was found by running the lvm2 testsuite with kasan.
Fixes: 29121bd0b0 ("[PATCH] dm mirror log: bitset_size fix")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Starting with the commit 63a225c9fd20, device mapper has an optimization
that it will take cheaper table lock (dm_get_live_table_fast instead of
dm_get_live_table) if the bio has REQ_NOWAIT. The bios with REQ_NOWAIT
must not block in the target request routine, if they did, we would be
blocking while holding rcu_read_lock, which is prohibited.
The targets that are suitable for REQ_NOWAIT optimization (and that don't
block in the map routine) have the flag DM_TARGET_NOWAIT set. Device
mapper will test if all the targets and all the devices in a table
support nowait (see the function dm_table_supports_nowait) and it will set
or clear the QUEUE_FLAG_NOWAIT flag on its request queue according to
this check.
There's a test in submit_bio_noacct: "if ((bio->bi_opf & REQ_NOWAIT) &&
!blk_queue_nowait(q)) goto not_supported" - this will make sure that
REQ_NOWAIT bios can't enter a request queue that doesn't support them.
This mechanism works to prevent REQ_NOWAIT bios from reaching dm targets
that don't support the REQ_NOWAIT flag (and that may block in the map
routine) - except that there is a small race condition:
submit_bio_noacct checks if the queue has the QUEUE_FLAG_NOWAIT without
holding any locks. Immediatelly after this check, the device mapper table
may be reloaded with a table that doesn't support REQ_NOWAIT (for example,
if we start moving the logical volume or if we activate a snapshot).
However the REQ_NOWAIT bio that already passed the check in
submit_bio_noacct would be sent to device mapper, where it could be
redirected to a dm target that doesn't support REQ_NOWAIT - the result is
sleeping while we hold rcu_read_lock.
In order to fix this race, we double-check if the target supports
REQ_NOWAIT while we hold the table lock (so that the table can't change
under us).
Fixes: 563a225c9f ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm_put_live_table_bio is called from the end of dm_submit_bio.
However, at this point, the bio may be already finished and the caller
may have freed the bio. Consequently, dm_put_live_table_bio accesses
the stale "bio" pointer.
Fix this bug by loading the bi_opf value and passing it to
dm_get_live_table_bio and dm_put_live_table_bio instead of the bio.
This bug was found by running the lvm2 testsuite with kasan.
Fixes: 563a225c9f ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
bio_alloc_bioset() takes a block device, number of vectors, the
OP flags, the GFP mask and the bio set. However when the prototype
was changed, the callisite in ppl_do_flush() had the OP flags and
the GFP flags reversed. This introduced some sparse error:
drivers/md/raid5-ppl.c:632:57: warning: incorrect type in argument 3
(different base types)
drivers/md/raid5-ppl.c:632:57: expected unsigned int opf
drivers/md/raid5-ppl.c:632:57: got restricted gfp_t [usertype]
drivers/md/raid5-ppl.c:633:61: warning: incorrect type in argument 4
(different base types)
drivers/md/raid5-ppl.c:633:61: expected restricted gfp_t [usertype]
gfp_mask
drivers/md/raid5-ppl.c:633:61: got unsigned long long
The sparse error introduction may not have been reported correctly by
0day due to other work that was cleaning up other sparse errors in this
area.
Fixes: 609be10667 ("block: pass a block_device and opf to bio_alloc_bioset")
Cc: stable@vger.kernel.org # 5.18+
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
The 07reshape5intr test is broke because of below path.
md_reap_sync_thread
-> mddev_unlock
-> md_unregister_thread(&mddev->sync_thread)
And md_check_recovery is triggered by,
mddev_unlock -> md_wakeup_thread(mddev->thread)
then mddev->reshape_position is set to MaxSector in raid5_finish_reshape
since MD_RECOVERY_INTR is cleared in md_check_recovery, which means
feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's
reshape_position can't be updated accordingly.
Fixes: 8b48ec23cc ("md: don't unregister sync_thread with reconfig_mutex held")
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
After commit 82f6cdcc36 ("dm: switch dm_io booleans over to proper
flags") dm_start_io_acct stopped atomically checking and setting
was_accounted, which turned into the DM_IO_ACCOUNTED flag. This opened
the possibility for a race where IO accounting is started twice for
duplicate bios. To remove the race, check the flag while holding the
io->lock.
Fixes: 82f6cdcc36 ("dm: switch dm_io booleans over to proper flags")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
After the commit ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone"),
clone_endio() only calls dm_zone_endio() when DM targets remap the
clone bio's bdev to something other than the md->disk->part0 default.
However, if a DM target (e.g. dm-crypt) stacked ontop of a dm-zoned
does not remap the clone bio using bio_set_dev() then dm_zone_endio()
is not called at completion of the bios and zone locks are not
properly unlocked. This triggers a hang, in dm_zone_map_bio(), when
blktests block/004 is run for dm-crypt on zoned block devices. To
avoid the hang, simply remove the clone_endio() check that verifies
the target remapped the clone bio to a device other than the default.
Fixes: ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The use of bioset_init_from_src mean that the pre-allocated pools weren't
used for anything except parameter passing, and the integrity pool
creation got completely lost for the actual live mapped_device. Fix that
by assigning the actual preallocated dm_md_mempools to the mapped_device
and using that for I/O instead of creating new mempools.
Fixes: 2a2a4c510b ("dm: use bioset_init_from_src() to copy bio_set")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YqhC
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block
Pull more block driver updates from Jens Axboe:
"A collection of stragglers that were late on sending in their changes
and just followup fixes.
- NVMe fixes pull request via Christoph:
- set controller enable bit in a separate write (Niklas Cassel)
- disable namespace identifiers for the MAXIO MAP1001 (Christoph)
- fix a comment typo (Julia Lawall)"
- MD fixes pull request via Song:
- Remove uses of bdevname (Christoph Hellwig)
- Bug fixes (Guoqing Jiang, and Xiao Ni)
- bcache fixes series (Coly)
- null_blk zoned write fix (Damien)
- nbd fixes (Yu, Zhang)
- Fix for loop partition scanning (Christoph)"
* tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits)
block: null_blk: Fix null_zone_write()
nvmet: fix typo in comment
nvme: set controller enable bit in a separate write
nvme-pci: disable namespace identifiers for the MAXIO MAP1001
bcache: avoid unnecessary soft lockup in kworker update_writeback_rate()
nbd: use pr_err to output error message
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
nbd: fix io hung while disconnecting device
nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed
nbd: fix race between nbd_alloc_config() and module removal
nbd: call genl_unregister_family() first in nbd_cleanup()
md: bcache: check the return value of kzalloc() in detached_dev_do_request()
bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init()
block, loop: support partitions without scanning
bcache: avoid journal no-space deadlock by reserving 1 journal bucket
bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()
bcache: improve multithreaded bch_sectors_dirty_init()
bcache: improve multithreaded bch_btree_check()
md: fix double free of io_acct_set bioset
md: Don't set mddev private to NULL in raid0 pers->free
...
devices.
- Fix DM verity target so that it cannot be switched to a different DM
target type (e.g. dm-linear) via DM table reload.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmKX0aMACgkQxSPxCi2d
A1okwgf+NMX+Il0qgda1mZrId7nVdQGGyv7uapLXIxRm5Z+LcUxqw+hqzoeabeQ/
7rou3KqsXuPcpu1AATPHis0Ub9CcXwtpbevf2rmh3Ey4kqLLuFqUP6IjwvFtyp2Y
Ms9QAhTvIZXxAPcrb7HH2v7ULOCmdI89OAr8Q/hQ+F4wjI8BO2tNJ4WfxeqpMy5M
EFwEO485Ct+XvLDek4+7hYxvSO/6ANgjgzWx4dwsP+iC9SFJurvNVnoXpIl+69DU
v8R6Udp0buQqFscyfRbHVOYxVkBROMWg/lKX/4hhgiSoV8j5xSm9hp3S13BffHj7
Bbp8cW+E6IkaASDpIRBAa/6a6k7K1w==
=+C+g
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core's dm_table_supports_poll to return false if target has no
data devices.
- Fix DM verity target so that it cannot be switched to a different DM
target type (e.g. dm-linear) via DM table reload.
* tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: set DM_TARGET_IMMUTABLE feature flag
dm table: fix dm_table_supports_poll to return false if no data devices
The device-mapper framework provides a mechanism to mark targets as
immutable (and hence fail table reloads that try to change the target
type). Add the DM_TARGET_IMMUTABLE flag to the dm-verity target's
feature flags to prevent switching the verity target with a different
target type.
Fixes: a4ffc15219 ("dm: add verity target")
Cc: stable@vger.kernel.org
Signed-off-by: Sarthak Kukreti <sarthakkukreti@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
It was reported that the "generic/250" test in xfstests (which uses
the dm-error target) demonstrates a regression where the kernel
crashes in bioset_exit().
Since commit cfc97abcbe ("dm: conditionally enable
BIOSET_PERCPU_CACHE for dm_io bioset") the bioset_init() for the dm_io
bioset will setup the bioset's per-cpu alloc cache if all devices have
QUEUE_FLAG_POLL set.
But there was an bug where a target that doesn't have any data devices
(and that doesn't even set the .iterate_devices dm target callback)
will incorrectly return true from dm_table_supports_poll().
Fix this by updating dm_table_supports_poll() to follow dm-table.c's
well-worn pattern for testing that _all_ targets in a DM table do in
fact have underlying devices that set QUEUE_FLAG_POLL.
NOTE: An additional block fix is still needed so that
bio_alloc_cache_destroy() clears the bioset's ->cache member.
Otherwise, a DM device's table reload that transitions the DM device's
bioset from using a per-cpu alloc cache to _not_ using one will result
in bioset_exit() crashing in bio_alloc_cache_destroy() because dm's
dm_io bioset ("io_bs") was left with a stale ->cache member.
Fixes: cfc97abcbe ("dm: conditionally enable BIOSET_PERCPU_CACHE for dm_io bioset")
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The kworker routine update_writeback_rate() is schedued to update the
writeback rate in every 5 seconds by default. Before calling
__update_writeback_rate() to do real job, semaphore dc->writeback_lock
should be held by the kworker routine.
At the same time, bcache writeback thread routine bch_writeback_thread()
also needs to hold dc->writeback_lock before flushing dirty data back
into the backing device. If the dirty data set is large, it might be
very long time for bch_writeback_thread() to scan all dirty buckets and
releases dc->writeback_lock. In such case update_writeback_rate() can be
starved for long enough time so that kernel reports a soft lockup warn-
ing started like:
watchdog: BUG: soft lockup - CPU#246 stuck for 23s! [kworker/246:31:179713]
Such soft lockup condition is unnecessary, because after the writeback
thread finishes its job and releases dc->writeback_lock, the kworker
update_writeback_rate() may continue to work and everything is fine
indeed.
This patch avoids the unnecessary soft lockup by the following method,
- Add new member to struct cached_dev
- dc->rate_update_retry (0 by default)
- In update_writeback_rate() call down_read_trylock(&dc->writeback_lock)
firstly, if it fails then lock contention happens.
- If dc->rate_update_retry <= BCH_WBRATE_UPDATE_MAX_SKIPS (15), doesn't
acquire the lock and reschedules the kworker for next try.
- If dc->rate_update_retry > BCH_WBRATE_UPDATE_MAX_SKIPS, no retry
anymore and call down_read(&dc->writeback_lock) to wait for the lock.
By the above method, at worst case update_writeback_rate() may retry for
1+ minutes before blocking on dc->writeback_lock by calling down_read().
For a 4TB cache device with 1TB dirty data, 90%+ of the unnecessary soft
lockup warning message can be avoided.
When retrying to acquire dc->writeback_lock in update_writeback_rate(),
of course the writeback rate cannot be updated. It is fair, because when
the kworker is blocked on the lock contention of dc->writeback_lock, the
writeback rate cannot be updated neither.
This change follows Jens Axboe's suggestion to a more clear and simple
version.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220528124550.32834-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFPcQAKCRDfioYZHlFs
Z9A3AQCdfoT5sY3OK+I/3oTvJ//6lw2MtXrnXFM046ICKPi9sgD8CzR9mRAHA+vj
kxOtJEU2bA9naninXGORsDUndiNkwQo=
=gVIn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
The function kzalloc() in detached_dev_do_request() can fail, so its
return value should be checked.
Fixes: bc082a55d2 ("bcache: fix inaccurate io state for detached bcache devices")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220527152818.27545-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The local variables check_state (in bch_btree_check()) and state (in
bch_sectors_dirty_init()) should be fully filled by 0, because before
allocating them on stack, they were dynamically allocated by kzalloc().
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220527152818.27545-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
set. This change improves DM's hipri bio polling (REQ_POLLED)
performance by 7 - 20% depending on the system.
- Update DM core to use jump_labels to further reduce cost of unlikely
branches for zoned block devices, dm-stats and swap_bios throttling.
- Various DM core changes to reduce bio-based DM overhead and simplify
IO accounting.
- Fundamental DM core improvements to dm_io reference counting and the
elimination of using bio_split()+bio_chain() -- instead DM's
bio-based IO accounting is updated to account that a split occurred.
- Improve DM core's abnormal bio processing to do less work.
- Improve DM core's hipri polling support to use a single list rather
than an hlist.
- Update DM core to pass NULL bdev to bio_alloc_clone() so that
initialization that isn't useful for DM can be elided.
- Add cond_resched to DM stats' various loops that loop over all
entries.
- Fix incorrect error code return from DM integrity's constructor.
- Make DM crypt's printing of the key constant-time.
- Update bio-based DM multipath to provide high-resolution timer to
the Historical Service Time (HST) path selector.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmKOiAwACgkQxSPxCi2d
A1qCxgf/VLmiywUR7zCIDiPyJkc547z2MlPVaTCzpclklyLZ5wgfTtqsb8RnEqRs
KIXrvKbakbfZtrG0k9ZYdbIIVO4jHQavCXtVZH0Mj4XqQArDhHxZzlBx8i6BirO5
aya7HKWHcXj+s7GF146hRcPtD53LbSNDrB/bVaiZcHxOemthSgtht2xwmZfzoCcS
JtorpWkA97lgDbdSAcR0kn1zkHDWFkQMJgnUL9FotnlhOVXZVUvAbgb4OjfxB3fG
bCYlytDhs+6VwO+/CZXcOA7LNNtkLJPEkxUxjrChS5do64SgJUlDvY66iB6+7K0w
0Jri5D/NZvjwYVeLgXn5UwyQJ75cjQ==
=zlaE
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Enable DM core bioset's per-cpu bio cache if QUEUE_FLAG_POLL set.
This change improves DM's hipri bio polling (REQ_POLLED) performance
by 7 - 20% depending on the system.
- Update DM core to use jump_labels to further reduce cost of unlikely
branches for zoned block devices, dm-stats and swap_bios throttling.
- Various DM core changes to reduce bio-based DM overhead and simplify
IO accounting.
- Fundamental DM core improvements to dm_io reference counting and the
elimination of using bio_split()+bio_chain() -- instead DM's
bio-based IO accounting is updated to account that a split occurred.
- Improve DM core's abnormal bio processing to do less work.
- Improve DM core's hipri polling support to use a single list rather
than an hlist.
- Update DM core to pass NULL bdev to bio_alloc_clone() so that
initialization that isn't useful for DM can be elided.
- Add cond_resched to DM stats' various loops that loop over all
entries.
- Fix incorrect error code return from DM integrity's constructor.
- Make DM crypt's printing of the key constant-time.
- Update bio-based DM multipath to provide high-resolution timer to the
Historical Service Time (HST) path selector.
* tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm: pass NULL bdev to bio_alloc_clone
dm cache metadata: remove unnecessary variable in __dump_mapping
dm mpath: provide high-resolution timer to HST for bio-based
dm crypt: make printing of the key constant-time
dm integrity: fix error code in dm_integrity_ctr()
dm stats: add cond_resched when looping over entries
dm: improve abnormal bio processing
dm: simplify bio-based IO accounting further
dm: put all polled dm_io instances into a single list
dm: improve dm_io reference counting
dm: don't grab target io reference in dm_zone_map_bio
dm: improve bio splitting and associated IO accounting
dm: switch to bdev based IO accounting interfaces
dm: pass dm_io instance to dm_io_acct directly
dm: don't pass bio to __dm_start_io_acct and dm_end_io_acct
dm: use bio_sectors in dm_aceept_partial_bio
dm: simplify basic targets
dm: conditionally enable branching for less used features
dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio
dm: move hot dm_io members to same cacheline as dm_target_io
...
The journal no-space deadlock was reported time to time. Such deadlock
can happen in the following situation.
When all journal buckets are fully filled by active jset with heavy
write I/O load, the cache set registration (after a reboot) will load
all active jsets and inserting them into the btree again (which is
called journal replay). If a journaled bkey is inserted into a btree
node and results btree node split, new journal request might be
triggered. For example, the btree grows one more level after the node
split, then the root node record in cache device super block will be
upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no
space in journal buckets, the journal replay has to wait for new journal
bucket to be reclaimed after at least one journal bucket replayed. This
is one example that how the journal no-space deadlock happens.
The solution to avoid the deadlock is to reserve 1 journal bucket in
run time, and only permit the reserved journal bucket to be used during
cache set registration procedure for things like journal replay. Then
the journal space will never be fully filled, there is no chance for
journal no-space deadlock to happen anymore.
This patch adds a new member "bool do_reserve" in struct journal, it is
inititalized to 0 (false) when struct journal is allocated, and set to
1 (true) by bch_journal_space_reserve() when all initialization done in
run_cache_set(). In the run time when journal_reclaim() tries to
allocate a new journal bucket, free_journal_buckets() is called to check
whether there are enough free journal buckets to use. If there is only
1 free journal bucket and journal->do_reserve is 1 (true), the last
bucket is reserved and free_journal_buckets() will return 0 to indicate
no free journal bucket. Then journal_reclaim() will give up, and try
next time to see whetheer there is free journal bucket to allocate. By
this method, there is always 1 jouranl bucket reserved in run time.
During the cache set registration, journal->do_reserve is 0 (false), so
the reserved journal bucket can be used to avoid the no-space deadlock.
Reported-by: Nikhil Kshirsagar <nkshirsagar@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After making bch_sectors_dirty_init() being multithreaded, the existing
incremental dirty sector counting in bch_root_node_dirty_init() doesn't
release btree occupation after iterating 500000 (INIT_KEYS_EACH_TIME)
bkeys. Because a read lock is added on btree root node to prevent the
btree to be split during the dirty sectors counting, other I/O requester
has no chance to gain the write lock even restart bcache_btree().
That is to say, the incremental dirty sectors counting is incompatible
to the multhreaded bch_sectors_dirty_init(). We have to choose one and
drop another one.
In my testing, with 512 bytes random writes, I generate 1.2T dirty data
and a btree with 400K nodes. With single thread and incremental dirty
sectors counting, it takes 30+ minites to register the backing device.
And with multithreaded dirty sectors counting, the backing device
registration can be accomplished within 2 minutes.
The 30+ minutes V.S. 2- minutes difference makes me decide to keep
multithreaded bch_sectors_dirty_init() and drop the incremental dirty
sectors counting. This is what this patch does.
But INIT_KEYS_EACH_TIME is kept, in sectors_dirty_init_fn() the CPU
will be released by cond_resched() after every INIT_KEYS_EACH_TIME keys
iterated. This is to avoid the watchdog reports a bogus soft lockup
warning.
Fixes: b144e45fc5 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b144e45fc5 ("bcache: make bch_sectors_dirty_init() to be
multithreaded") makes bch_sectors_dirty_init() to be much faster
when counting dirty sectors by iterating all dirty keys in the btree.
But it isn't in ideal shape yet, still can be improved.
This patch does the following changes to improve current parallel dirty
keys iteration on the btree,
- Add read lock to root node when multiple threads iterating the btree,
to prevent the root node gets split by I/Os from other registered
bcache devices.
- Remove local variable "char name[32]" and generate kernel thread name
string directly when calling kthread_run().
- Allocate "struct bch_dirty_init_state state" directly on stack and
avoid the unnecessary dynamic memory allocation for it.
- Decrease BCH_DIRTY_INIT_THRD_MAX from 64 to 12 which is enough indeed.
- Increase &state->started to count created kernel thread after it
succeeds to create.
- When wait for all dirty key counting threads to finish, use
wait_event() to replace wait_event_interruptible().
With the above changes, the code is more clear, and some potential error
conditions are avoided.
Fixes: b144e45fc5 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 8e7102273f ("bcache: make bch_btree_check() to be
multithreaded") makes bch_btree_check() to be much faster when checking
all btree nodes during cache device registration. But it isn't in ideal
shap yet, still can be improved.
This patch does the following thing to improve current parallel btree
nodes check by multiple threads in bch_btree_check(),
- Add read lock to root node while checking all the btree nodes with
multiple threads. Although currently it is not mandatory but it is
good to have a read lock in code logic.
- Remove local variable 'char name[32]', and generate kernel thread name
string directly when calling kthread_run().
- Allocate local variable "struct btree_check_state check_state" on the
stack and avoid unnecessary dynamic memory allocation for it.
- Reduce BCH_BTR_CHKTHREAD_MAX from 64 to 12 which is enough indeed.
- Increase check_state->started to count created kernel thread after it
succeeds to create.
- When wait for all checking kernel threads to finish, use wait_event()
to replace wait_event_interruptible().
With this change, the code is more clear, and some potential error
conditions are avoided.
Fixes: 8e7102273f ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=geQL
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
Now io_acct_set is alloc and free in personality. Remove the codes that
free io_acct_set in md_free and md_stop.
Fixes: 0c031fd37f (md: Move alloc/free acct bioset in to personality)
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
In normal stop process, it does like this:
do_md_stop
|
__md_stop (pers->free(); mddev->private=NULL)
|
md_free (free mddev)
__md_stop sets mddev->private to NULL after pers->free. The raid device
will be stopped and mddev memory is free. But in reshape, it doesn't
free the mddev and mddev will still be used in new raid.
In reshape, it first sets mddev->private to new_pers and then runs
old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free.
The new raid can't work anymore. It will panic when dereference
mddev->private because of NULL pointer dereference.
It can panic like this:
[63010.814972] kernel BUG at drivers/md/raid10.c:928!
[63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1
[63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020
[63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10]
[63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246
[63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000
[63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800
[63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000
[63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200
[63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003
[63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000
[63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0
[63010.927363] Call Trace:
[63010.929822] ? bio_reset+0xe/0x40
[63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10]
[63010.938629] raid10_sync_request+0x756/0x1610 [raid10]
[63010.943770] md_do_sync.cold+0x3e4/0x94c
[63010.947698] md_thread+0xab/0x160
[63010.951024] ? md_write_inc+0x50/0x50
[63010.954688] kthread+0x149/0x170
[63010.957923] ? set_kthread_struct+0x40/0x40
[63010.962107] ret_from_fork+0x22/0x30
Removing the code that sets mddev->private to NULL in raid0 can fix
problem.
Fixes: 0c031fd37f (md: Move alloc/free acct bioset in to personality)
Reported-by: Fine Fan <ffan@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Use the %pg format specifier to save on stack consumption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Generally, the md_unregister_thread is called with reconfig_mutex, but
raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread,
so md_unregister_thread can be called simulitaneously from two call sites
in theory.
Then after previous commit which remove the protection of reconfig_mutex
for md_unregister_thread completely, the potential issue could be worse
than before.
Let's take pers_lock at the beginning of function to ensure reentrancy.
Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Unregister sync_thread doesn't need to hold reconfig_mutex since it
doesn't reconfigure array.
And it could cause deadlock problem for raid5 as follows:
1. process A tried to reap sync thread with reconfig_mutex held after echo
idle to sync_action.
2. raid5 sync thread was blocked if there were too many active stripes.
3. SB_CHANGE_PENDING was set (because of write IO comes from upper layer)
which causes the number of active stripes can't be decreased.
4. SB_CHANGE_PENDING can't be cleared since md_check_recovery was not able
to hold reconfig_mutex.
More details in the link:
https://lore.kernel.org/linux-raid/5ed54ffc-ce82-bf66-4eff-390cb23bc1ac@molgen.mpg.de/T/#t
And add one parameter to md_reap_sync_thread since it could be called by
dm-raid which doesn't hold reconfig_mutex.
Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <song@kernel.org>
Introduce dax_recovery_write() operation. The function is used to
recover a dax range that contains poison. Typical use case is when
a user process receives a SIGBUS with si_code BUS_MCEERR_AR
indicating poison(s) in a dax range, in response, the user process
issues a pwrite() to the page-aligned dax range, thus clears the
poison and puts valid data in the range.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/20220422224508.440670-6-jane.chu@oracle.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Most DM targets will remap the clone bio passed to their ->map
function using bio_set_bdev(). So this change to pass NULL bdev to
bio_alloc_clone avoids clone-time work that sets up resources for a
bdev association that will not be used in practice (e.g. clone issued
to underlying device will not use DM device's blk-cgroups resources).
But clone->bi_bdev is still initialized following bio_alloc_clone to
preserve DM target expectations that clone->bi_bdev will be set.
Follow-up work is needed to audit DM targets to remove accesses to a
clone->bi_bdev that the target didn't initialize with bio_set_dev().
Depends-on: 7ecc56c62b ("block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Fix the following coccicheck warning:
drivers/md/dm-cache-metadata.c:1512:5-6: Unneeded variable: "r".
Return "0" on line 1520.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The precision loss of reading IO start_time with jiffies_to_nsecs
instead of using a high resolution timer degrades HST path prediction
for BIO-based mpath on high load workloads.
Below, I show the utilization percentage of a 10 disk multipath with
asymmetrical disk access cost, while being exercised by a randwrite FIO
benchmark with high submission queue depth (depth=64). It is possible
to see that the HST path selection degrades heavily for high-iops in
BIO-mpath, underutilizing the slower paths way beyond expected. This
seems to be caused by the start_time truncation, which makes some IO to
seem much slower than it actually is. In this scenario ST outperforms
HST for bio-mpath, but not for mq-mpath, which already uses ktime_get_ns().
The third column shows utilization with this patch applied. It is easy
to see that now HST prediction is much closer to the ideal distribution
(calculated considering the real cost of each path).
| | ST | HST (orig) | HST(ktime) | Best |
| sdd | 0.17 | 0.20 | 0.17 | 0.18 |
| sde | 0.17 | 0.20 | 0.17 | 0.18 |
| sdf | 0.17 | 0.20 | 0.17 | 0.18 |
| sdg | 0.06 | 0.00 | 0.06 | 0.04 |
| sdh | 0.03 | 0.00 | 0.03 | 0.02 |
| sdi | 0.03 | 0.00 | 0.03 | 0.02 |
| sdj | 0.02 | 0.00 | 0.01 | 0.01 |
| sdk | 0.02 | 0.00 | 0.01 | 0.01 |
| sdl | 0.17 | 0.20 | 0.17 | 0.18 |
| sdm | 0.17 | 0.20 | 0.17 | 0.18 |
This issue was originally discussed [1] when we first merged HST, and
this patch was left as a low hanging fruit to be solved later.
Regarding the implementation, as suggested by Mike in that mail thread,
in order to avoid the overhead of ktime_get_ns for other selectors, this
patch adds a flag for the selector code to request the high-resolution
timer.
I tested this using the same benchmark used in the original HST submission.
Full test and benchmark scripts are available here:
https://people.collabora.com/~krisman/HST-BIO-MPATH/
[1] https://lore.kernel.org/lkml/85tv0am9de.fsf@collabora.com/T/
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
[snitzer: cleaned up various implementation details]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The device mapper dm-crypt target is using scnprintf("%02x", cc->key[i]) to
report the current key to userspace. However, this is not a constant-time
operation and it may leak information about the key via timing, via cache
access patterns or via the branch predictor.
Change dm-crypt's key printing to use "%c" instead of "%02x". Also
introduce hex2asc() that carefully avoids any branching or memory
accesses when converting a number in the range 0 ... 15 to an ascii
character.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The "r" variable shadows an earlier "r" that has function scope. It
means that we accidentally return success instead of an error code.
Smatch has a warning for this:
drivers/md/dm-integrity.c:4503 dm_integrity_ctr()
warn: missing error code 'r'
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm-stats can be used with a very large number of entries (it is only
limited by 1/4 of total system memory), so add rescheduling points to
the loops that iterate over the entries.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Read/write/flush are the most common operations, optimize switch in
is_abnormal_io() for those cases. Follows same pattern established in
block perf-wip commit ("block: optimise blk_may_split for normal rw")
Also, push is_abnormal_io() check and blk_queue_split() down from
dm_submit_bio() to dm_split_and_process_bio() and set new
'is_abnormal_io' flag in clone_info. Optimize __split_and_process_bio
and __process_abnormal_io by leveraging ci.is_abnormal_io flag.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Now that io splitting is recorded prior to, or during, ->map IO
accounting can happen immediately rather than defer until after
bio splitting in dm_split_and_process_bio().
Remove the DM_IO_START_ACCT flag and also remove dm_io's map_task
member because there is no longer any need to wait for splitting to
occur before accounting.
Also move dm_io struct's 'flags' member to consolidate struct holes.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Now that bio_split() isn't used by DM's bio splitting, it is a bit
overkill to link dm_io into an hlist given there is only single dm_io
in the list.
Convert to using a single list for holding all dm_io instances
associated with this bio.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Currently each dm_io's reference counter is grabbed before calling
__map_bio(), this way isn't efficient since we can move this grabbing
to initialization time inside alloc_io().
Meantime it becomes typical async io reference counter model: one is
for submission side, the other is for completion side, and the io won't
be completed until both sides are done.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm_zone_map_bio() is only called from __map_bio in which the io's
reference is grabbed already, and the reference won't be released
until the bio is submitted, so not necessary to do it dm_zone_map_bio
any more.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The current DM code (ab)uses late assignment of dm_io->orig_bio (after
__map_bio() returns and any bio splitting is complete) to indicate the
FS bio has been processed and can be accounted. This results in
awkward waiting until ->orig_bio is set in dm_submit_bio_remap().
Also the bio splitting was implemented using bio_split()+bio_chain()
-- a well-worn pattern but it requires bio cloning purely for the
benefit of more natural IO accounting. The bio_split() result was
stored in ->orig_bio to represent the mapped part of the original FS
bio.
DM has switched to the bdev based IO accounting interface. DM's IO
accounting can be implemented in terms of the original FS bio (now
stored early in ->orig_bio) via access to its sectors/bio_op. And
if/when splitting is needed, set a new DM_IO_WAS_SPLIT flag and use
new dm_io fields of .sector_offset & .sectors to allow IO accounting
for split bios _without_ needing to clone a new bio to store in
->orig_bio.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
DM splits flush with data into empty flush followed by bio with data
payload, switch dm_io_acct() to use bdev_{start,end}_io_acct() to do
this accoiunting more naturally (rather than temporarily changing the
bio's bi_size).
This will allow DM to more easily account bios that are split (in
following commit).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
All the other 4 parameters are retrieved from the 'dm_io' instance, so
it's not necessary to pass all four to dm_io_acct().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm->orig_bio is always passed to __dm_start_io_acct and dm_end_io_acct,
so it isn't necessary to take one bio parameter for the two helpers.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Rename 'bi_size' to 'bio_sectors' given bi_size is being stored in
sectors. Also, use bio_sectors() rather than open-coding it.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use jump_labels to further reduce cost of unlikely branches for zoned
block devices, dm-stats and swap_bios throttling.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If a bio is marked REQ_NOWAIT optimize dm_submit_bio()'s dm_table RCU
usage to dm_{get,put}_live_table_fast.
DM core offers protection against blocking (via suspend) if REQ_NOWAIT.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Pull common DM_IO_ACCOUNTED check out to beginning of dm_start_io_acct.
Also, use dm_tio_is_normal (and move it to dm-core.h).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
A bioset's per-cpu alloc cache may have broader utility in the future
but for now constrain it to being tightly coupled to QUEUE_FLAG_POLL.
Also change dm_io_complete() to use bio_clear_polled() so that it
properly clears all associated bio state on requeue.
This commit improves DM's hipri bio polling (REQ_POLLED) perf by
7 - 20% depending on the system.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
Setting it to the discard granularity as done by raid5 is mostly
harmless but also useless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
Setting it to the discard granularity as done by dm-zoned is mostly
harmless but also useless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are several instances where magic numbers are used in md.c instead
of the defined constants in md_p.h. This patch set improves code
readability by replacing all occurrences of 0xffff, 0xfffe, and 0xfffd when
relating to md roles with their equivalent defined constant.
Signed-off-by: David Sloan <david.sloan@eideticom.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
The RAID0 layout is irrelevant if all members have the same size so the
array has only one zone. It is *also* irrelevant if the array has two
zones and the second zone has only one device, for example if the array
has two members of different sizes.
So in that case it makes sense to allow assembly even when the layout is
undefined, like what is done when the array has only one zone.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Signed-off-by: Song Liu <song@kernel.org>
A handful of functions note the device_lock must be held with a comment
but this is not comprehensive. Many other functions hold the lock when
taken so add an __must_hold() to each call to annotate when the lock is
held.
This makes it a bit easier to analyse device_lock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
To suppress the last remaining sparse warnings about accessing
rdev, add rcu_dereference_protected calls to a couple places
in raid5-ppl. All of these places are called under raid5_run and
therefore are occurring before the array has started and is thus
safe.
There's no sensible check to do for the second argument of
rcu_dereference_protected() so a comment is added instead.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
The mddev_lock should be held during raid5_remove_disk() which is when
the rdev/replacement pointers are modified. So any access to these
pointers marked __rcu should be safe whenever the mddev_lock is held.
There are numerous such access that currently produce sparse warnings.
Add a helper function, rdev_mdlock_deref() that wraps
rcu_dereference_protected() in all these instances.
This annotation fixes a number of sparse warnings.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
There are a number of accesses to __rcu variables that should be safe
because nr_pending in the disk is known to be elevated.
Create a wrapper around rcu_dereference_protected() to annotate these
accesses and verify that nr_pending is non-zero.
This fixes a number of sparse warnings.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
rdev and replacement are protected in some circumstances with
rcu_dereference and synchronize_rcu (in raid5_remove_disk()). However,
they were not annotated with __rcu so a sparse warning is emitted for
every rcu_dereference() call.
Add the __rcu annotation and fix up the initialization with
RCU_INIT_POINTER, all pointer modifications with rcu_assign_pointer(),
a few cases where the pointer value is tested with rcu_access_pointer()
and one case where READ_ONCE() is used instead of rcu_dereference(),
a case in print_raid5_conf() that should have rcu_dereference() and
rcu_read_[un]lock() calls.
Additional sparse issues will be fixed up in further commits.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Sparse reports many warnings of the form:
drivers/md/raid5.c:1476:16: warning: dereference of noderef expression
This is because all struct raid5_percpu definitions get marked as
__percpu when really only the pointer in r5conf should have that
annotation.
Fix this by moving the defnition of raid5_precpu out of the definition
of struct r5conf.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Be more careful about the error returns. Most errors in this function
are actually ENOMEM, but it forcibly returns EIO if conf has been
allocated.
Instead return ret and ensure it is set appropriately before each goto
abort.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
This commit includes two topics:
1> replace deprecated strlcpy
change strlcpy to strscpy for strlcpy is marked as deprecated in
Documentation/process/deprecated.rst
2> remove duplicated strlcpy line
in md_bitmap_read_sb@md-bitmap.c there are two duplicated strlcpy(), the
history:
- commit cf921cc19c ("Add node recovery callbacks") introduced the first
usage of strlcpy().
- commit b97e92574c ("Use separate bitmaps for each nodes in the cluster")
introduced the second strlcpy(). this time, the two strlcpy() are same,
we can remove anyone safely.
- commit d3b178adb3 ("md: Skip cluster setup for dm-raid") added dm-raid
special handling. And the "nodes" value is the key of this patch. but
from this patch, strlcpy() which was introduced by b97e92574c
become necessary.
- commit 3c462c880b ("md: Increment version for clustered bitmaps") used
clustered major version to only handle in clustered env. this patch
could look a polishment for clustered code logic.
So cf921cc19c became useless after d3b178adb3, we could remove it
safely.
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
The bug is here:
if (!rdev || rdev->desc_nr != nr) {
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each_rcu(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
and lead to invalid memory access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'pdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 70bcecdb15 ("md-cluster: Improve md_reload_sb to be less error prone")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
The bug is here:
if (!rdev)
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element found.
Otherwise it will bypass the NULL check and lead to invalid memory
access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'rdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 2aa82191ac ("md-cluster: Perform a lazy update")
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Raid456 module had allowed to achieve failed state. It was fixed by
fb73b357fb ("raid5: block failing device if raid will be failed").
This fix introduces a bug, now if raid5 fails during IO, it may result
with a hung task without completion. Faulty flag on the device is
necessary to process all requests and is checked many times, mainly in
analyze_stripe().
Allow to set faulty on drive again and set MD_BROKEN if raid is failed.
As a result, this level is allowed to achieve failed state again, but
communication with userspace (via -EBUSY status) will be preserved.
This restores possibility to fail array via #mdadm --set-faulty command
and will be fixed by additional verification on mdadm side.
Reproduction steps:
mdadm -CR imsm -e imsm -n 3 /dev/nvme[0-2]n1
mdadm -CR r5 -e imsm -l5 -n3 /dev/nvme[0-2]n1 --assume-clean
mkfs.xfs /dev/md126 -f
mount /dev/md126 /mnt/root/
fio --filename=/mnt/root/file --size=5GB --direct=1 --rw=randrw
--bs=64k --ioengine=libaio --iodepth=64 --runtime=240 --numjobs=4
--time_based --group_reporting --name=throughput-test-job
--eta-newline=1 &
echo 1 > /sys/block/nvme2n1/device/device/remove
echo 1 > /sys/block/nvme1n1/device/device/remove
[ 1475.787779] Call Trace:
[ 1475.793111] __schedule+0x2a6/0x700
[ 1475.799460] schedule+0x38/0xa0
[ 1475.805454] raid5_get_active_stripe+0x469/0x5f0 [raid456]
[ 1475.813856] ? finish_wait+0x80/0x80
[ 1475.820332] raid5_make_request+0x180/0xb40 [raid456]
[ 1475.828281] ? finish_wait+0x80/0x80
[ 1475.834727] ? finish_wait+0x80/0x80
[ 1475.841127] ? finish_wait+0x80/0x80
[ 1475.847480] md_handle_request+0x119/0x190
[ 1475.854390] md_make_request+0x8a/0x190
[ 1475.861041] generic_make_request+0xcf/0x310
[ 1475.868145] submit_bio+0x3c/0x160
[ 1475.874355] iomap_dio_submit_bio.isra.20+0x51/0x60
[ 1475.882070] iomap_dio_bio_actor+0x175/0x390
[ 1475.889149] iomap_apply+0xff/0x310
[ 1475.895447] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.902736] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.909974] iomap_dio_rw+0x2f2/0x490
[ 1475.916415] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.923680] ? atime_needs_update+0x77/0xe0
[ 1475.930674] ? xfs_file_dio_aio_read+0x6b/0xe0 [xfs]
[ 1475.938455] xfs_file_dio_aio_read+0x6b/0xe0 [xfs]
[ 1475.946084] xfs_file_read_iter+0xba/0xd0 [xfs]
[ 1475.953403] aio_read+0xd5/0x180
[ 1475.959395] ? _cond_resched+0x15/0x30
[ 1475.965907] io_submit_one+0x20b/0x3c0
[ 1475.972398] __x64_sys_io_submit+0xa2/0x180
[ 1475.979335] ? do_io_getevents+0x7c/0xc0
[ 1475.986009] do_syscall_64+0x5b/0x1a0
[ 1475.992419] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 1476.000255] RIP: 0033:0x7f11fc27978d
[ 1476.006631] Code: Bad RIP value.
[ 1476.073251] INFO: task fio:3877 blocked for more than 120 seconds.
Cc: stable@vger.kernel.org
Fixes: fb73b357fb ("raid5: block failing device if raid will be failed")
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
There is no direct mechanism to determine raid failure outside
personality. It is done by checking rdev->flags after executing
md_error(). If "faulty" flag is not set then -EBUSY is returned to
userspace. -EBUSY means that array will be failed after drive removal.
Mdadm has special routine to handle the array failure and it is executed
if -EBUSY is returned by md.
There are at least two known reasons to not consider this mechanism
as correct:
1. drive can be removed even if array will be failed[1].
2. -EBUSY seems to be wrong status. Array is not busy, but removal
process cannot proceed safe.
-EBUSY expectation cannot be removed without breaking compatibility
with userspace. In this patch first issue is resolved by adding support
for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in
next commit.
The idea is to set the MD_BROKEN if we are sure that raid is in failed
state now. This is done in each error_handler(). In md_error() MD_BROKEN
flag is checked. If is set, then -EBUSY is returned to userspace.
As in previous commit, it causes that #mdadm --set-faulty is able to
fail array. Previously proposed workaround is valid if optional
functionality[1] is disabled.
[1] commit 9a567843f7ce("md: allow last device to be forcibly removed from
RAID1/RAID10.")
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmJjYKoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpqOtEADHSqgTsfwwsYOq15ups32oEdoFtPJ0Fl1C
RUWLOzqskk2AV9Foj9TeGSqp448AW+sgV9P6NjrUR7nrefRtYwEdTx2ou1oEwaq0
wl/wsZGg9BiX2w6kBSDRxoYZL220n4B2iscg76VOb6+9VeLdD5s/qeL2P912Bre8
zAEfdGvmLK7gF/6Oxo0fqpzwWyQ7O8+wBTBbpqcwZPImPFsbuWLMG4fgFINb20fD
UsVIXWEyV1UlWOk2v4GJl3rToR1f6l7tVT9gUYrRIt9iPTDH86rHkAiLg4QCbfZA
556xHivv5Dw91JJfGDCeiMtq9kjeIRiwpOTNiP1Av5MTM0TC8BaXtkpfwhO5r3iZ
tbc2M/7Q8pOM0ati+HWBOp6Gi9hjzqwObGllKJnD1MZ/ESx88z2vlIcQYyBPkNOO
giNmP52sgN/5ToMqW25AFbSHJ5Tb+p0epEbbJOv3m+0sSR2TnQ9/DweDBbsOs3Yw
KyaHb1e7WxqtIn+4t1r2GgXdDJkQrMcdonkLu+i4Yoz0v4rfRGfg89F+LNylq1kI
hng/xPsbgSAjn1j/1EkCKKjX0+R6Blhc/I99EucD9zaOmHYnx6hO0KySJXQzIAo7
lalfsE5bx1LWR1yC/KJ0To6TXQo9Onf5IIUPs1duiHnTFYgpM9z5sOmcyRL+3OtF
Rvzw0yR37Q==
=hxoY
-----END PGP SIGNATURE-----
Merge tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just two small regression fixes for bcache"
* tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
bcache: fix wrong bdev parameter when calling bio_alloc_clone() in do_bio_hook()
bcache: put bch_bio_map() back to correct location in journal_write_unlocked()
Commit abfc426d1b ("block: pass a block_device to bio_clone_fast")
calls the modified bio_alloc_clone() in bcache code as:
bio_init_clone(bio->bi_bdev, bio, orig_bio, GFP_NOIO);
But the first parameter is wrong, where bio->bi_bdev should be
orig_bio->bi_bdev. The wrong bi_bdev panics the kernel when submitting
cache bio.
This patch fixes the wrong bdev parameter usage and avoid the panic.
Fixes: abfc426d1b ("block: pass a block_device to bio_clone_fast")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220419160425.4148-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit a7c50c9404 ("block: pass a block_device and opf to bio_reset")
moves bch_bio_map() inside journal_write_unlocked() next to the location
where the modified bio_reset() was called.
This change is wrong because calling bch_bio_map() immediately after
bio_reset(), a BUG_ON(!bio->bi_iter.bi_size) inside bch_bio_map() will
be triggered and panic the kernel.
This patch puts bch_bio_map() back to its original correct location in
journal_write_unlocked() and avoid the BUG_ON().
Fixes: a7c50c9404 ("block: pass a block_device and opf to bio_reset")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220419160425.4148-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to query the number of sectors support per each discard bio
based on the block device and use this helper to stop various places from
poking into the request_queue to see if discard is supported and if so how
much. This mirrors what is done e.g. for write zeroes as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the stable writes flag based on the block_device
instead of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the magic autofree semantics and require the callers to explicitly
call bio_init to initialize the bio.
This allows bio_free to catch accidental bio_put calls on bio_init()ed
bios as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 92986f6b4c ("dm: use bio_clone_fast in alloc_io/alloc_tio")
removed bio_clone_fast() call from alloc_tio() when ci->io->tio is
available. In this case, ci->bio is not copied to ci->io->tio.clone.
This is fine since init_clone_info() sets same values to ci->bio and
ci->io->tio.clone.
However, when incoming bios have REQ_PREFLUSH flag, __send_empty_flush()
prepares a zero length bio on stack and set it to ci->bio. At this time,
ci->io->tio.clone still keeps non-zero length. When alloc_tio() chooses
this ci->io->tio.clone as the bio to map, it is passed to targets as
non-empty flush bio. It causes bio length check failure in dm-zoned and
unexpected operation such as dm_accept_partial_bio() call.
To avoid the non-empty flush bio, set zero length to ci->io->tio.clone
in __send_empty_flush().
Fixes: 92986f6b4c ("dm: use bio_clone_fast in alloc_io/alloc_tio")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The intent behind commit e6fc9f62ce ("dm: flag clones created by
__send_duplicate_bios") was to formally disallow the use of
dm_accept_partial_bio() where it simply isn't possible -- due to
constraint that multiple bios cannot meaningfully update a shared
tio->len_ptr.
But that commit went too far and disallowed the case where "abormal"
IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by
not marking a dm_io with a single dm_target_io (and bio), that happens
to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO.
Also remove 'unsigned *len' parameter from alloc_multiple_bios().
This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned
when a WRITE_ZEROES bio is issued.
Fixes: 655f3aad7a ("dm: switch dm_target_io booleans over to proper flags")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit 0fbb4d93b3 ("dm: add dm_submit_bio_remap interface") changed
the alloc_io() function to delay the initialization of struct dm_io's
orig_bio member, leaving it NULL until after the dm_io and associated
user submitted bio is processed by __split_and_process_bio(). This
change causes a NULL pointer dereference in dm_zone_map_bio() when the
original user bio is inspected to detect the need for zone append
command emulation.
Fix this NULL pointer by updating dm_zone_map_bio() to not access
->orig_bio when the same info can be accessed from the clone of the
->orig_bio _before_ any ->map processing. Save off the bio_op() and
bio_sectors() for the clone and then use the saved orig_bio_details as
needed.
Fixes: 0fbb4d93b3 ("dm: add dm_submit_bio_remap interface")
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Mixing sched_clock() and ktime_get_ns() usage will give bad results.
Switch hst_select_path() from using sched_clock() to ktime_get_ns().
Also rename path_service_time()'s 'sched_now' variable to 'now'.
Fixes: 2613eab119 ("dm mpath: add Historical Service Time Path Selector")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
It is possible to set up dm-integrity in such a way that the
"tag_size" parameter is less than the actual digest size. In this
situation, a part of the digest beyond tag_size is ignored.
In this case, dm-integrity would write beyond the end of the
ic->recalc_tags array and corrupt memory. The corruption happened in
integrity_recalc->integrity_sector_checksum->crypto_shash_final.
Fix this corruption by increasing the tags array so that it has enough
padding at the end to accomodate the loop in integrity_recalc() being
able to write a full digest size for the last member of the tags
array.
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
unused.
- Fix DM bio polling to handle possibility that underlying device(s)
return BLK_STS_AGAIN during submission.
- Fix dm_io and dm_target_io flags race condition on Alpha.
- Add some pr_err debugging to help debug cases when DM ioctl
structure is corrupted.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmJHUFIACgkQxSPxCi2d
A1qclwf/binqM95fkE2PW6Uvqm7EEsiWXj8Bu+5NQqvlhrLhVTeMdxOKYLClOZ0o
eY0TLmkCCtrzveHZYbVcV/HM/tUY5qFT4gZbsXwW+HTSxOPeiOx5ZOOthP3kZbU0
zKpu4N1udfg7m8wSnE7o0cJKBrea6fUf5YDpUT+9EmMhoL0a8IJ3Y1TSJZ/CDJEm
OptDS2QH+pFeiIt+lCPL18BT+KnW48Cofpx6ZAGnphLTfSeu8ZiMCew0LhQcepCf
L6jfnQQmyGYBydTVSTzP3bbP/GNxPjDZuMT/z/sdMGrQmIxZT+/UqCl+kzD/jC7q
1Sjha+8gYo5a2cMTJZSKmFBKjvLYJQ==
=dWLx
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM integrity shrink crash due to journal entry not being marked
unused.
- Fix DM bio polling to handle possibility that underlying device(s)
return BLK_STS_AGAIN during submission.
- Fix dm_io and dm_target_io flags race condition on Alpha.
- Add some pr_err debugging to help debug cases when DM ioctl structure
is corrupted.
* tag 'for-5.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix bio polling to handle possibile BLK_STS_AGAIN
dm: fix dm_io and dm_target_io flags race condition on Alpha
dm integrity: set journal entry unused when shrinking device
dm ioctl: log an error if the ioctl structure is corrupted
Expanded testing of DM's bio polling support (using more fio threads
to dm-linear ontop of null_blk) exposed the possibility for polled
bios to hang (repeatedly polling in io_uring) when null_blk responds
with BLK_STS_AGAIN (due to lack of resources):
1) io_complete_rw_iopoll() is called from blkdev_bio_end_io_async() to
notify kiocb is done, that is the completion interface between block
layer and io_uring
2) io_complete_rw_iopoll() is called from io_do_iopoll()
3) dm returns BLK_STS_AGAIN for one bio (on behalf of underlying
driver), then io_complete_rw_iopoll is called, but io_do_iopoll()
doesn't handle -EAGAIN at all (due to logic in io_rw_should_reissue)
4) reason for dm's BLK_STS_AGAIN is underlying null_blk driver ran out
of requests (easier to reproduce by setting low hw_queue_depth).
5) dm should handle BLK_STS_AGAIN for POLLED underlying IO, and may
retry in dm layer.
This fix adds REQ_POLLED specific BLK_STS_AGAIN handling to
dm_io_complete() that clears REQ_POLLED and requeues the bio to DM
using queue_io().
Fixes: b99fdcdc36 ("dm: support bio polling")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[snitzer: revised header, reused dm_io_complete's REQ_POLLED case]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Early alpha processors cannot write a single byte or short; they read 8
bytes, modify the value in registers and write back 8 bytes.
This could cause race condition in the structure dm_io - if the fields
flags and io_count are modified simultaneously.
Fix this bug by using 32-bit flags if we are on Alpha and if we are
compiling for a processor that doesn't have the byte-word-extension.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: bd4a6dd241 ("dm: reduce size of dm_io and dm_target_io structs")
[snitzer: Jens allowed this change since Mikulas owns a relevant Alpha!]
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit f6f72f32c2 ("dm integrity: don't replay journal data past the
end of the device") skips journal replay if the target sector points
beyond the end of the device. Unfortunatelly, it doesn't set the
journal entry unused, which resulted in this BUG being triggered:
BUG_ON(!journal_entry_is_unused(je))
Fix this by calling journal_entry_set_unused() for this case.
Fixes: f6f72f32c2 ("dm integrity: don't replay journal data past the end of the device")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
[snitzer: revised header]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This will help triage bugs when userspace is passing invalid ioctl
structure to the kernel.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[snitzer: log errors using DMERR instead of DMWARN]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
-----BEGIN PGP SIGNATURE-----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=efaq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block
Pull NVMe write streams removal from Jens Axboe:
"This removes the write streams support in NVMe. No vendor ever really
shipped working support for this, and they are not interested in
supporting it.
With the NVMe support gone, we have nothing in the tree that supports
this. Remove passing around of the hints.
The only discussion point in this patchset imho is the fact that the
file specific write hint setting/getting fcntl helpers will now return
-1/EINVAL like they did before we supported write hints. No known
applications use these functions, I only know of one prototype that I
help do for RocksDB, and that's not used. That said, with a change
like this, it's always a bit controversial. Alternatively, we could
just make them return 0 and pretend it worked. It's placement based
hints after all"
* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
fs: remove fs.f_write_hint
fs: remove kiocb.ki_hint
block: remove the per-bio/request write hint
nvme: remove support or stream based temperature hint
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
accounting with focus on fixing wildly inaccurate IO stats for
dm-crypt (and other DM targets that defer bio submission in their
own workqueues). End result is proper IO accounting, made possible
by targets being updated to use the new dm_submit_bio_remap()
interface.
- Add hipri bio polling support (REQ_POLLED) to bio-based DM.
- Reduce dm_io and dm_target_io structs so that a single dm_io (which
contains dm_target_io and first clone bio) weighs in at 256 bytes.
For reference the bio struct is 128 bytes.
- Various other small cleanups, fixes or improvements in DM core and
targets.
- Update MAINTAINERS with my kernel.org email address to allow
distinction between my "upstream" and "Red" Hats.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmI7ghIACgkQxSPxCi2d
A1q04wgAzaRu186WjfCO8MK0uyv3S52Rw1EsgYealAqoPwQJ9KkW2icvjtwRL+fJ
1+w6qE/Da6QdwXj9lGtp1XIXJFipNJSw3PSaE/tV2cXiBemZlzJ5vR6F6dfeYKmV
/sGas46H2l+aD4Xr7unUmcN/AYrNIFtnucClY3+DlJFPesXQQc9a/XmL9RX9MrN4
MS9wLkh/5QSG3zReEct/4GVmNSJAjFfLkkeFHtLN82jvvDmnszRT5+aJ06WkXeOz
OZmQfOPnJv5MnFUz9DOaRb/fTCoyxzxLnNM5Lt3jyFPk9Jf8Qz9TJ2rgskxsE83u
UsCD/Y/QAdDcrRVB5SS6+yx4AS6uSA==
=cinj
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Significant refactoring and fixing of how DM core does bio-based IO
accounting with focus on fixing wildly inaccurate IO stats for
dm-crypt (and other DM targets that defer bio submission in their own
workqueues). End result is proper IO accounting, made possible by
targets being updated to use the new dm_submit_bio_remap() interface.
- Add hipri bio polling support (REQ_POLLED) to bio-based DM.
- Reduce dm_io and dm_target_io structs so that a single dm_io (which
contains dm_target_io and first clone bio) weighs in at 256 bytes.
For reference the bio struct is 128 bytes.
- Various other small cleanups, fixes or improvements in DM core and
targets.
- Update MAINTAINERS with my kernel.org email address to allow
distinction between my "upstream" and "Red" Hats.
* tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (46 commits)
dm: consolidate spinlocks in dm_io struct
dm: reduce size of dm_io and dm_target_io structs
dm: switch dm_target_io booleans over to proper flags
dm: switch dm_io booleans over to proper flags
dm: update email address in MAINTAINERS
dm: return void from __send_empty_flush
dm: factor out dm_io_complete
dm cache: use dm_submit_bio_remap
dm: simplify dm_sumbit_bio_remap interface
dm thin: use dm_submit_bio_remap
dm: add WARN_ON_ONCE to dm_submit_bio_remap
dm: support bio polling
block: add ->poll_bio to block_device_operations
dm mpath: use DMINFO instead of printk with KERN_INFO
dm: stop using bdevname
dm-zoned: remove the ->name field in struct dmz_dev
dm: remove unnecessary local variables in __bind
dm: requeue IO if mapping table not yet available
dm io: remove stale comment block for dm_io()
dm thin metadata: remove unused dm_thin_remove_block and __remove
...
-----BEGIN PGP SIGNATURE-----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=993h
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
No reason to have separate startio_lock and endio_lock given endio_lock
could be used during submission anyway.
This change leaves the dm_io struct weighing in at 256 bytes (down
from 272 bytes, so saves a cacheline).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Remove the from_wq argument from dm_sumbit_bio_remap(). Eliminates the
need for dm_sumbit_bio_remap() callers to know whether they are
calling for a workqueue or from the original dm_submit_bio().
Add map_task to dm_io struct, record the map_task in alloc_io and
clear it after all target ->map() calls have completed. Update
dm_sumbit_bio_remap to check if 'current' matches io->map_task rather
than rely on passed 'from_rq' argument.
This change really simplifies the chore of porting each DM target to
using dm_sumbit_bio_remap() because there is no longer the risk of
programming error by not completely knowing all the different contexts
a particular method that calls dm_sumbit_bio_remap() might be used in.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If a target uses dm_submit_bio_remap() it should set
ti->accounts_remapped_io.
Also, switch dm_start_io_acct() WARN_ON to WARN_ON_ONCE.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Support bio polling (REQ_POLLED) in the following approach:
1) only support io polling on normal READ/WRITE, and other abnormal IOs
still fallback to IRQ mode, so the target io (and DM's clone bio) is
exactly inside the dm io.
2) hold one refcnt on io->io_count after submitting this dm bio with
REQ_POLLED
3) support dm native bio splitting, any dm io instance associated with
current bio will be added into one list which head is bio->bi_private
which will be recovered before ending this bio
4) implement .poll_bio() callback, call bio_poll() on the single target
bio inside the dm io which is retrieved via bio->bi_bio_drv_data; call
dm_io_dec_pending() after the target io is done in .poll_bio()
5) enable QUEUE_FLAG_POLL if all underlying queues enable QUEUE_FLAG_POLL,
which is based on Jeffle's previous patch.
These changes are good for a 30-35% IOPS improvement for polled IO.
For detailed test results please see (Jens, thanks for testing!):
https://listman.redhat.com/archives/dm-devel/2022-March/049868.html
or https://marc.info/?l=linux-block&m=164684246214700&w=2
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use bio_init to initialize the bios when needed to the full state
instead of a partial initialization plus later setting of dev and op
and bio_reset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
There is no need to preallocate the bio and reset it when use. Just
allocate it on-stack and use a bvec places next to the pages used for
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Stop using bio_reset and just initialize the bio fully when needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
We have all the information to pass the bdev and op directly to bio_init,
so do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Calling mdelay(1000) from process context, even while a reboot
is in progress, does not make sense.
Using msleep() allows other threads to make progress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Song Liu <song@kernel.org>
Those counters are not necessary after commit 11bb45e8aaf6 ("md: drop queue
limitation for RAID1 and RAID10"). Remove them from all code (conf and
plug structs). raid1_plug_cb and raid10_plug_cb are identical, so move
definition of raid1_plug_cb to common raid1-10 definitions and use it for
RAID10 too.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
With the NVMe support for this gone, there are no consumers of these hints
left, so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220304175556.407719-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.18/drivers: (51 commits)
bcache: fixup multiple threads crash
bcache: fixup bcache_dev_sectors_dirty_add() multithreaded CPU false sharing
floppy: use memcpy_{to,from}_bvec
drbd: use bvec_kmap_local in recv_dless_read
drbd: use bvec_kmap_local in drbd_csum_bio
bcache: use bvec_kmap_local in bio_csum
nvdimm-btt: use bvec_kmap_local in btt_rw_integrity
nvdimm-blk: use bvec_kmap_local in nd_blk_rw_integrity
zram: use memcpy_from_bvec in zram_bvec_write
zram: use memcpy_to_bvec in zram_bvec_read
aoe: use bvec_kmap_local in bvcpy
iss-simdisk: use bvec_kmap_local in simdisk_submit_bio
nvme: check that EUI/GUID/UUID are globally unique
nvme: check for duplicate identifiers earlier
nvme: fix the check for duplicate unique identifiers
nvme: cleanup __nvme_check_ids
nvme: remove nssa from struct nvme_ctrl
nvme: explicitly set non-error for directives
nvme: expose cntrltype and dctype through sysfs
nvme: send uevent on connection up
...
Use the %pg format specifier to save on stack consuption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the %pg format specifier to save on stack consuption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the %pg format specifier to save on stack consuption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the %pg format specifier to save on stack consuption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the %pg format specifier to save on stack consuption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When multiple threads to check btree nodes in parallel, the main
thread wait for all threads to stop or CACHE_SET_IO_DISABLE flag:
wait_event_interruptible(check_state->wait,
atomic_read(&check_state->started) == 0 ||
test_bit(CACHE_SET_IO_DISABLE, &c->flags));
However, the bch_btree_node_read and bch_btree_node_read_done
maybe call bch_cache_set_error, then the CACHE_SET_IO_DISABLE
will be set. If the flag already set, the main thread return
error. At the same time, maybe some threads still running and
read NULL pointer, the kernel will crash.
This patch change the event wait condition, the main thread must
wait for all threads to stop.
Fixes: 8e7102273f ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Coly Li <colyli@suse.de>
When attaching a cached device (a.k.a backing device) to a cache
device, bch_sectors_dirty_init() is called to count dirty sectors
and stripes (see what bcache_dev_sectors_dirty_add() does) on the
cache device.
When bcache_dev_sectors_dirty_add() is called, set_bit(stripe,
d->full_dirty_stripes) or clear_bit(stripe, d->full_dirty_stripes)
operation will always be performed. In full_dirty_stripes, each 1bit
represents stripe_size (8192) sectors (512B), so 1bit=4MB (8192*512),
and each CPU cache line=64B=512bit=2048MB. When 20 threads process
a cached disk with 100G dirty data, a single thread processes about
23M at a time, and 20 threads total 460M. These full_dirty_stripes
bits corresponding to the 460M data is likely to fall in the same CPU
cache line. When one of these threads performs a set_bit or clear_bit
operation, the same CPU cache line of other threads will become invalid
and must read the full_dirty_stripes from the main memory again. Compared
with single thread, the time of a bcache_dev_sectors_dirty_add()
call is increased by about 50 times in our test (100G dirty data,
20 threads, bcache_dev_sectors_dirty_add() is called more than
20 million times).
This patch tries to test_bit before set_bit or clear_bit operation.
Therefore, a lot of force set and clear operations will be avoided,
and most of bcache_dev_sectors_dirty_add() calls will only read CPU
cache line.
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the %pg format specifier instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Just use the %pg format specifier to print the block device name
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.
Link: https://lore.kernel.org/r/20220209082828.2629273-7-hch@lst.de
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.
Link: https://lore.kernel.org/r/20220209082828.2629273-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update both bio-based and request-based DM to requeue IO if the
mapping table not available.
This race of IO being submitted before the DM device ready is so
narrow, yet possible for initial table load given that the DM device's
request_queue is created prior, that it best to requeue IO to handle
this unlikely case.
Reported-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 7eaceaccab ("block: remove per-queue plugging") dropped
unplug_delay and blk_unplug(). Plus, the current kernel has no
fundamental difference between sync_io() and async_io() except
sync_io() uses sync_io_complete() as the notify.fn and explicitly
calls wait_for_completion_io() to sync. The comment isn't valid
any more.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use time_is_before_jiffies() to improve code readability.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Explicitly convert unsigned int in the right of the conditional
expression to int to match the left side operand and the return type,
fixing the following compiler warning:
drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned
type in conditional expression [-Wsign-compare]
Fixes: c538f6ec9f ("dm crypt: add ability to use keys from the kernel key retention service")
Signed-off-by: Aashish Sharma <shraash@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
It appears like cmd could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents of kernel memory
from being leaked to userspace via speculative execution by using
array_index_nospec.
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
All entries measured by dm ima are prefixed by a version string
(dm_version=N.N.N). When there is no data to measure, the entire buffer is
overwritten with a string containing the version string again and the
length of that string is added to the length of the version string.
The new length is now wrong because it contains the version string twice.
This caused entries like this:
dm_version=4.45.0;name=test,uuid=test;table_clear=no_data; \
\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 \
current_device_capacity=204808;
Signed-off-by: Thore Sommer <public@thson.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The 'table' static array is read-only so it make sense to make
it const. Add in the int type to clean up checkpatch warning.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Care was taken to support kcryptd_io_read being called from crypt_map
or workqueue. Use of an intermediate CRYPT_MAP_READ_GFP gfp_t
(defined as GFP_NOWAIT) should protect from maintenance burden if that
flag were to change for some reason.
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Where possible, switch from early bio-based IO accounting (at the time
DM clones each incoming bio) to late IO accounting just before each
remapped bio is issued to underlying device via submit_bio_noacct().
Allows more precise bio-based IO accounting for DM targets that use
their own workqueues to perform additional processing of each bio in
conjunction with their DM_MAPIO_SUBMITTED return from their map
function. When a target is updated to use dm_submit_bio_remap() they
must also set ti->accounts_remapped_io to true.
Use xchg() in start_io_acct(), as suggested by Mikulas, to ensure each
IO is only started once. The xchg race only happens if
__send_duplicate_bios() sends multiple bios -- that case is reflected
via tio->is_duplicate_bio. Given the niche nature of this race, it is
best to avoid any xchg performance penalty for normal IO.
For IO that was never submitted with dm_bio_submit_remap(), but the
target completes the clone with bio_endio, accounting is started then
ended and pending_io counter decremented.
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Formally disallow dm_accept_partial_bio() on clones created by
__send_duplicate_bios() because their len_ptr points to a shared
unsigned int. __send_duplicate_bios() is only used for flush bios
and other "abnormal" bios (discards, writezeroes, etc). And
dm_accept_partial_bio() already didn't support flush bios.
Also refactor __send_changing_extent_only() to reflect it cannot fail.
As such __send_changing_extent_only() can update the clone_info before
__send_duplicate_bios() is called to fan-out __map_bio() calls.
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove one 4 byte hole in dm_io struct.
Remove two 4 byte holes in dm_target_io struct.
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Prep for being able to defer trace_block_bio_remap() until when the
bio is remapped and submitted by the DM target.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 8615cb65bd ("dm: remove useless loop in
__split_and_process_bio") showcased that we no longer loop.
Remove the bio_advance() in __split_and_process_bio() that was only
needed when looping was possible.
Similarly there is no need to advance the bio, using ci->sector
cursor, in __send_duplicate_bios().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The flush_bio in question was just initialized to be empty, so there
is no way bio_has_data() will return true. So remove stale BUG_ON().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove needless branching and indentation. Leaves code to catch
malformed op_is_zone_mgmt bios (they shouldn't have a payload).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fold __clone_and_map_data_bio into its only caller.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Rename __split_and_process_bio to dm_split_and_process_bio.
Rename __split_and_process_non_flush to __split_and_process_bio.
Also fix a stale comment and whitespace.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is no need for dm_io_dec_pending() to copy dm_io fields
anymore now that DM provides its own pending_io counters again.
The race documented in commit d208b89401 ("dm: fix mempool NULL
pointer race when completing IO") no longer exists now that block
core's in_flight counters aren't used to signal all dm_io is
complete.
Also, rename {start,end}_io_acct to dm_{start,end}_io_acct.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm_stats_account_io()'s STAT_PRECISE_TIMESTAMPS support doesn't handle
the fact that with commit b879f915bc ("dm: properly fix redundant
bio-based IO accounting") io->start_time _may_ be in the past (meaning
the start_io_acct() was deferred until later).
Add a new dm_stats_recalc_precise_timestamps() helper that will
set/clear a new 'precise_timestamps' flag in the dm_stats struct based
on whether any configured stats enable STAT_PRECISE_TIMESTAMPS.
And update DM core's alloc_io() to use dm_stats_record_start() to set
stats_aux.duration_ns if stats->precise_timestamps is true.
Also, remove unused 'last_sector' and 'last_rw' members from the
dm_stats struct.
Fixes: b879f915bc ("dm: properly fix redundant bio-based IO accounting")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM handles a flush with data by first issuing an empty flush and then
once it completes the REQ_PREFLUSH flag is removed and the payload is
issued. The problem fixed by this commit is that both the empty flush
bio and the data payload will account the full extent of the data
payload.
Fix this by factoring out dm_io_acct() and having it wrap all IO
accounting to set the size of bio with REQ_PREFLUSH to 0, account the
IO, and then restore the original size.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit d208b89401 ("dm: fix mempool NULL pointer race when
completing IO") didn't go far enough.
When bio_end_io_acct ends the count of in-flight I/Os may reach zero
and the DM device may be suspended. There is a possibility that the
suspend races with dm_stats_account_io.
Fix this by adding percpu "pending_io" counters to track outstanding
dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also,
rename md_in_flight_bios() to dm_in_flight_bios() and update it to
iterate all pending_io counters.
Fixes: d208b89401 ("dm: fix mempool NULL pointer race when completing IO")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb8 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb8 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold dm_dispatch_clone_request into it's only caller, and use a switch
statement to single dispatch for the handling of the different return
values from blk_insert_cloned_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both ->start_time_ns and the RQF_IO_STAT are set when the request is
allocated using blk_mq_alloc_request by dm-mpath in blk_mq_rq_ctx_init.
The block layer also ensures ->start_time_ns is only set when actually
needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The request must be submitted to the queue it was allocated for, so
remove the extra request_queue argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code to stack blk-mq drivers is only used by dm-multipath, and
will preferably stay that way. Make it optional and only selected
by device mapper, so that the buildbots more easily catch abuses
like the one that slipped in in the ufs driver in the last merged
window. Another positive side effects is that kernel builds without
device mapper shrink a little bit as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a block_device to bio_clone_fast and __bio_clone_fast and give
the functions more suitable names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers of __bio_clone_fast initialize the bio first. Move that
initialization into __bio_clone_fast instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace open coded bio_clone_fast implementations with the actual helper.
Note that the bio allocated as part of the dm_io structure in alloc_io
will only actually be used later in alloc_tio, making this earlier
cloning of the information safe.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__bio_clone_fast should also clone integrity and crypto data, as a clone
without those is incomplete. Right now the only caller that can actually
support crypto and integrity data (dm) does it manually for the one
callchain that supports these, but we better do it properly in the core.
Note that all callers except for the above mentioned one also don't need
to handle failure at all, given that the integrity and crypto clones are
based on mempool allocations that won't fail for sleeping allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold __remap_to_origin_clear_discard into the two callers to prepare
for bio cloning refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most targets just need a single flush bio. Open code that case in
__send_duplicate_bios without the need to add the bio to a list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return the clone bio embedded into the tio as that is what the callers
actually want. Similar for the free side.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the call to __bio_clone_fast and the assignment of ->len_ptr from
the callers into alloc_tio to prepare for changes to the bio clone API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold __send_duplicate_bios into its only caller to prepare for
refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold clone_bio into its only caller to prepare for refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to stop open coding the container_of operations to get
from the clone bio to the tio structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device that we plan to use this bio for and the
operation to bio_reset to optimize the assigment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device that we plan to use this bio for and the
operation to bio_init to optimize the assignment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device and operation that we plan to use this bio for to
bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both
for the passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blkdev_issue_flush, which uses an on-stack bio instead of an
opencoded version with a bio embedded into struct pool.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blkdev_issue_flush, which uses an on-stack bio instead of an
opencoded version with a bio embedded into struct dm_snapshot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just open code it next to the bio allocations, which saves a few lines
of code, prepares for future changes and allows to remove the duplicate
bi_opf assignment for the bio_clone_fast case in kcryptd_io_read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove handling of NULL returns from sleeping bio_alloc calls given that
those can't fail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Record the start_time for a bio but defer the starting block core's IO
accounting until after IO is submitted using bio_start_io_acct_time().
This approach avoids the need to mess around with any of the
individual IO stats in response to a bio_split() that follows bio
submission.
Reported-by: Bud Brown <bubrown@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Depends-on: e45c47d1f9 ("block: add bio_start_io_acct_time() to control start_time")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-4-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the bcache sysfs code to use default_groups field which has
been the preferred way since aa30f47cf6 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: linux-bcache@vger.kernel.org
Acked-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220106100004.3277439-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Simplify the dax_operations API
- Eliminate bdev_dax_pgoff() in favor of the filesystem maintaining
and applying a partition offset to all its DAX iomap operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api
Tags offered after the branch was cut:
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/Ydb/3P+8nvjCjYfO@redhat.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYd3dTAAKCRDfioYZHlFs
Z//UAP9zetoTE+O7zJG7CXja4jSopSadbdbh6QKSXaqfKBPvQQD+N4US3wA2bGv8
f/qCY62j2Hj3hUTGHs9RvTyw3JsSYAA=
=QvDs
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax and libnvdimm updates from Dan Williams:
"The bulk of this is a rework of the dax_operations API after
discovering the obstacles it posed to the work-in-progress DAX+reflink
support for XFS and other copy-on-write filesystem mechanics.
Primarily the need to plumb a block_device through the API to handle
partition offsets was a sticking point and Christoph untangled that
dependency in addition to other cleanups to make landing the
DAX+reflink support easier.
The DAX_PMEM_COMPAT option has been around for 4 years and not only
are distributions shipping userspace that understand the current
configuration API, but some are not even bothering to turn this option
on anymore, so it seems a good time to remove it per the deprecation
schedule. Recall that this was added after the device-dax subsystem
moved from /sys/class/dax to /sys/bus/dax for its sysfs organization.
All recent functionality depends on /sys/bus/dax.
Some other miscellaneous cleanups and reflink prep patches are
included as well.
Summary:
- Simplify the dax_operations API:
- Eliminate bdev_dax_pgoff() in favor of the filesystem
maintaining and applying a partition offset to all its DAX iomap
operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api"
* tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits)
iomap: Fix error handling in iomap_zero_iter()
ACPI: NFIT: Import GUID before use
dax: remove the copy_from_iter and copy_to_iter methods
dax: remove the DAXDEV_F_SYNC flag
dax: simplify dax_synchronous and set_dax_synchronous
uio: remove copy_from_iter_flushcache() and copy_mc_to_iter()
iomap: turn the byte variable in iomap_zero_iter into a ssize_t
memremap: remove support for external pgmap refcounts
fsdax: don't require CONFIG_BLOCK
iomap: build the block based code conditionally
dax: fix up some of the block device related ifdefs
fsdax: shift partition offset handling into the file systems
dax: return the partition offset from fs_dax_get_by_bdev
iomap: add a IOMAP_DAX flag
xfs: pass the mapping flags to xfs_bmbt_to_iomap
xfs: use xfs_direct_write_iomap_ops for DAX zeroing
xfs: move dax device handling into xfs_{alloc,free}_buftarg
ext4: cleanup the dax handling in ext4_fill_super
ext2: cleanup the dax handling in ext2_fill_super
fsdax: decouple zeroing from the iomap buffered I/O code
...
persistent-data library used by thinp and cache.
- Update DM integrity to use struct_group() to zero struct
journal_sector.
- Update DM sysfs to use default_groups in kobj_type.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmHe/s4ACgkQxSPxCi2d
A1rlwggA4esorVQSM86KcoHjRqatof1NBPoAdTPt1BykO9wl/HBCn4YGOPJVWkoP
Dwe1PUvlH0ZbpnW/J7IrMpdT+IyXJVzQSmFJsQTFjMWXQM2OCDKz5YJc4KQzFBda
Hl30kChoot58kxtZ29FLz4t3cpXG8lkB3tz3O/Z2McGQTymNM6Ekbv7GXwX5jfDo
QpRsXEJ2L2jyVFxwE6kCIpDIiOI0a3+3OvHQneTGunCnhqZ6N3ii8llKbw/OAzHI
jE+q+tJ6NeNMVMdETenrFXSBcbxo07VG87hWj62XbGzHaeYE5vWu1UCWPjx2kqS3
+Co7+q02v925cThrRGftc5xQlB88+Q==
=YgBt
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fixes and improvements to dm btree and dm space map code in
persistent-data library used by thinp and cache.
- Update DM integrity to use struct_group() to zero struct
journal_sector.
- Update DM sysfs to use default_groups in kobj_type.
* tag 'for-5.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm sysfs: use default_groups in kobj_type
dm integrity: Use struct_group() to zero struct journal_sector
dm space map common: add bounds check to sm_ll_lookup_bitmap()
dm btree: add a defensive bounds check to insert_at()
dm btree remove: change a bunch of BUG_ON() calls to proper errors
dm btree spine: eliminate duplicate le32_to_cpu() in node_check()
dm btree spine: remove extra node_check function declaration
-----BEGIN PGP SIGNATURE-----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=k0IZ
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- mtip32xx pci cleanups (Bjorn)
- mtip32xx conversion to generic power management (Vaibhav)
- rsxx pci powermanagement cleanups (Bjorn)
- Remove the rsxx driver. This hardware never saw much adoption, and
it's been end of lifed for a while. (Christoph)
- MD pull request from Song:
- REQ_NOWAIT support (Vishal Verma)
- raid6 benchmark optimization (Dirk Müller)
- Fix for acct bioset (Xiao Ni)
- Clean up max_queued_requests (Mariusz Tkaczyk)
- PREEMPT_RT optimization (Davidlohr Bueso)
- Use default_groups in kobj_type (Greg Kroah-Hartman)
- Use attribute groups in pktcdvd and rnbd (Greg)
- NVMe pull request from Christoph:
- increment request genctr on completion (Keith Busch, Geliang
Tang)
- add a 'iopolicy' module parameter (Hannes Reinecke)
- print out valid arguments when reading from /dev/nvme-fabrics
(Hannes Reinecke)
- Use struct_group() in drbd (Kees)
- null_blk fixes (Ming)
- Get rid of congestion logic in pktcdvd (Neil)
- Floppy ejection hang fix (Tasos)
- Floppy max user request size fix (Xiongwei)
- Loop locking fix (Tetsuo)
* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
md: use default_groups in kobj_type
md: Move alloc/free acct bioset in to personality
lib/raid6: Use strict priority ranking for pq gen() benchmarking
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
md: fix spelling of "its"
md: raid456 add nowait support
md: raid10 add nowait support
md: raid1 add nowait support
md: add support for REQ_NOWAIT
md: drop queue limitation for RAID1 and RAID10
md/raid5: play nice with PREEMPT_RT
block/rnbd-clt-sysfs: use default_groups in kobj_type
pktcdvd: convert to use attribute groups
block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
nvme: add 'iopolicy' module parameter
nvme: drop unused variable ctrl in nvme_setup_cmd
nvme: increment request genctr on completion
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
block: remove the rsxx driver
rsxx: Drop PCI legacy power management
...
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the md rdev sysfs code to use default_groups field which
has been the preferred way since commit aa30f47cf6 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Song Liu <song@kernel.org>
Use the possessive "its" instead of the contraction "it's"
in printed messages.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Song Liu <song@kernel.org>
Returns EAGAIN in case the raid456 driver would block waiting for reshape.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
This adds nowait support to the RAID10 driver. Very similar to
raid1 driver changes. It makes RAID10 driver return with EAGAIN
for situations where it could wait for eg:
- Waiting for the barrier,
- Reshape operation,
- Discard operation.
wait_barrier() and regular_request_wait() fn are modified to return bool
to support error for wait barriers. They returns true in case of wait
or if wait is not required and returns false if wait was required
but not performed to support nowait.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
This adds nowait support to the RAID1 driver. It makes RAID1 driver
return with EAGAIN for situations where it could wait for eg:
- Waiting for the barrier,
wait_barrier() fn is modified to return bool to support error for
wait barriers. It returns true in case of wait or if wait is not
required and returns false if wait was required but not performed
to support nowait.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
commit 021a24460d ("block: add QUEUE_FLAG_NOWAIT") added support
for checking whether a given bdev supports handling of REQ_NOWAIT or not.
Since then commit 6abc49468e ("dm: add support for REQ_NOWAIT and enable
it for linear target") added support for REQ_NOWAIT for dm. This uses
a similar approach to incorporate REQ_NOWAIT for md based bios.
This patch was tested using t/io_uring tool within FIO. A nvme drive
was partitioned into 2 partitions and a simple raid 0 configuration
/dev/md0 was created.
md0 : active raid0 nvme4n1p1[1] nvme4n1p2[0]
937423872 blocks super 1.2 512k chunks
Before patch:
$ ./t/io_uring /dev/md0 -p 0 -a 0 -d 1 -r 100
Running top while the above runs:
$ ps -eL | grep $(pidof io_uring)
38396 38396 pts/2 00:00:00 io_uring
38396 38397 pts/2 00:00:15 io_uring
38396 38398 pts/2 00:00:13 iou-wrk-38397
We can see iou-wrk-38397 io worker thread created which gets created
when io_uring sees that the underlying device (/dev/md0 in this case)
doesn't support nowait.
After patch:
$ ./t/io_uring /dev/md0 -p 0 -a 0 -d 1 -r 100
Running top while the above runs:
$ ps -eL | grep $(pidof io_uring)
38341 38341 pts/2 00:10:22 io_uring
38341 38342 pts/2 00:10:37 io_uring
After running this patch, we don't see any io worker thread
being created which indicated that io_uring saw that the
underlying device does support nowait. This is the exact behaviour
noticed on a dm device which also supports nowait.
For all the other raid personalities except raid0, we would need
to train pieces which involves make_request fn in order for them
to correctly handle REQ_NOWAIT.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
As suggested by Neil Brown[1], this limitation seems to be
deprecated.
With plugging in use, writes are processed behind the raid thread
and conf->pending_count is not increased. This limitation occurs only
if caller doesn't use plugs.
It can be avoided and often it is (with plugging). There are no reports
that queue is growing to enormous size so remove queue limitation for
non-plugged IOs too.
[1] https://lore.kernel.org/linux-raid/162496301481.7211.18031090130574610495@noble.neil.brown.name
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
raid_run_ops() relies on the implicitly disabled preemption for
its percpu ops, although this is really about CPU locality. This
breaks RT semantics as it can take regular (and thus sleeping)
spinlocks, such as stripe_lock.
Add a local_lock such that non-RT does not change and continues
to be just map to preempt_disable/enable, but makes RT happy as
the region will use a per-CPU spinlock and thus be preemptible
and still guarantee CPU locality.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the dm sysfs code to use default_groups field which has
been the preferred way since aa30f47cf6 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add struct_group() to mark region of struct journal_sector that should be
initialized to zero.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap().
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Abuse of BUG_ON() is never appropriate, best to propagate errors to
fail gracefully (rather than take the entire system down).
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Should have been removed as part of commit f73e2e70ec ("dm btree
spine: remove paranoid node_check call in node_prep_for_write()")
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
These methods indirect the actual DAX read/write path. In the end pmem
uses magic flush and mc safe variants and fuse and dcssblk use plain ones
while device mapper picks redirects to the underlying device.
Add set_dax_nocache() and set_dax_nomc() APIs to control which copy
routines are used to remove indirect call from the read/write fast path
as well as a lot of boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com> [virtiofs]
Link: https://lore.kernel.org/r/20211215084508.435401-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove the DAXDEV_F_SYNC flag and thus the flags argument to alloc_dax and
just let the drivers call set_dax_synchronous directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211215084508.435401-4-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----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=Huz8
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for hammering on the delayed run queue timer (me)
- bcache regression fix for this merge window (Lin)
- Fix a divide-by-zero in the blk-iocost code (Tejun)
* tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
bcache: fix NULL pointer reference in cached_dev_detach_finish
block: reduce kblockd_mod_delayed_work_on() CPU consumption
iocost: Fix divide-by-zero on donation from low hweight cgroup
- Fix DM integrity data corruption, introduced during 5.16 merge, due
to improper use of bvec_kmap_local().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmG7cKcACgkQxSPxCi2d
A1qgxggAn4k9cGzxLTT+xgkufQKwsc+WvegR7Amwb/jzKh5XE9KaXDnMkcyz/4GX
nHCfynHRgWjPU6V3cESRz/MApG/7sQ6UGtLgIXkZGbeSHIE4aRYf3AECUhpD/uB+
XPX4kTFz0ZvIHYpk4HielOHVA31DQl+GkYXddDXCijXYmG80rpUgUg2fm0+O+TtQ
eCQjbQV173KSbi4vlzeDyK9cp2rIGvk/UfmY9cIw1b3Gd5vpCVStW9r+P8MEpSNA
ar5exvN9c3AR/VIVfBS/9rw0T+l56M8L0efPrSXEV9/pdiXHFzEx+sGEnDUE5F3o
g9K2VwkLtuk3kubiSV/kjNBIB4cZyA==
=razj
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix use after free in DM btree remove's rebalance_children()
- Fix DM integrity data corruption, introduced during 5.16 merge, due
to improper use of bvec_kmap_local()
* tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix data corruption due to improper use of bvec_kmap_local
dm btree remove: fix use after free in rebalance_children()
Commit 25058d1c72 ("dm integrity: use bvec_kmap_local in
__journal_read_write") didn't account for __journal_read_write() later
adding the biovec's bv_offset. As such using bvec_kmap_local() caused
the start of the biovec to be skipped.
Trivial test that illustrates data corruption:
# integritysetup format /dev/pmem0
# integritysetup open /dev/pmem0 integrityroot
# mkfs.xfs /dev/mapper/integrityroot
...
bad magic number
bad magic number
Metadata corruption detected at xfs_sb block 0x0/0x1000
libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000
releasing dirty buffer (bulk) to free list!
Fix this by using kmap_local_page() instead of bvec_kmap_local() in
__journal_read_write().
Fixes: 25058d1c72 ("dm integrity: use bvec_kmap_local in __journal_read_write")
Reported-by: Tony Asleson <tasleson@redhat.com>
Reviewed-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 0259d4498b ("bcache: move calc_cached_dev_sectors to proper
place on backing device detach") tries to fix calc_cached_dev_sectors
when bcache device detaches, but now we have:
cached_dev_detach_finish
...
bcache_device_detach(&dc->disk);
...
closure_put(&d->c->caching);
d->c = NULL; [*explicitly set dc->disk.c to NULL*]
list_move(&dc->list, &uncached_devices);
calc_cached_dev_sectors(dc->disk.c); [*passing a NULL pointer*]
...
Upper codeflows shows how bug happens, this patch fix the problem by
caching dc->disk.c beforehand, and cache_set won't be freed under us
because c->caching closure at least holds a reference count and closure
callback __cache_set_unregister only being called by bch_cache_set_stop
which using closure_queue(&c->caching), that means c->caching closure
callback for destroying cache_set won't be trigger by previous
closure_put(&d->c->caching).
So at this stage(while cached_dev_detach_finish is calling) it's safe to
access cache_set dc->disk.c.
Fixes: 0259d4498b ("bcache: move calc_cached_dev_sectors to proper place on backing device detach")
Signed-off-by: Lin Feng <linf@wangsu.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211112053629.3437-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In driver/md/md.c, if the function autorun_array() is called,
the problem of double free may occur.
In function autorun_array(), when the function do_md_run() returns an
error, the function do_md_stop() will be called.
The function do_md_run() called function md_run(), but in function
md_run(), the pointer mddev->private may be freed.
The function do_md_stop() called the function __md_stop(), but in
function __md_stop(), the pointer mddev->private also will be freed
without judging null.
At this time, the pointer mddev->private will be double free, so it
needs to be judged null or not.
Signed-off-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: Song Liu <songliubraving@fb.com>
The superblock of version 1.0 doesn't get moved to the new position on a
device size change. This leads to a rdev without a superblock on a known
position, the raid can't be re-assembled.
The line was removed by mistake and is re-added by this patch.
Fixes: d9c0fa509e ("md: fix max sectors calculation for super 1.0")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Hochholdinger <markus@hochholdinger.net>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Prepare for the removal of the block_device from the DAX I/O path by
returning the partition offset from fs_dax_get_by_bdev so that the file
systems have it at hand for use during I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-26-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a helper to perform the entire remapping for DAX accesses. This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-12-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a helper to perform the entire remapping for DAX accesses. This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-11-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a helper to perform the entire remapping for DAX accesses. This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-10-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just open code the block size and dax_dev == NULL checks in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Replace the dax_host_hash with an xarray indexed by the pointer value
of the gendisk, and require explicitly calls from the block drivers that
want to associate their gendisk with a dax_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The device mapper DAX support is all hanging off a block device and thus
can't be used with device dax. Make it depend on CONFIG_FS_DAX instead
of CONFIG_DAX_DRIVER. This also means that bdev_dax_pgoff only needs to
be built under CONFIG_FS_DAX now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-3-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure ->dax_dev is NULL on error so that the cleanup path doesn't
trip over an ERR_PTR.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211129102203.2243509-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just use the disk attached to the request_queue instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move dm_tm_unlock() after dm_tm_dec().
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=QaFI
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block
Pull more block driver updates from Jens Axboe:
- Last series adding error handling support for add_disk() in drivers.
After this one, and once the SCSI side has been merged, we can
finally annotate add_disk() as must_check. (Luis)
- bcache fixes (Coly)
- zram fixes (Ming)
- ataflop locking fix (Tetsuo)
- nbd fixes (Ye, Yu)
- MD merge via Song
- Cleanup (Yang)
- sysfs fix (Guoqing)
- Misc fixes (Geert, Wu, luo)
* tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits)
bcache: Revert "bcache: use bvec_virt"
ataflop: Add missing semicolon to return statement
floppy: address add_disk() error handling on probe
ataflop: address add_disk() error handling on probe
block: update __register_blkdev() probe documentation
ataflop: remove ataflop_probe_lock mutex
mtd/ubi/block: add error handling support for add_disk()
block/sunvdc: add error handling support for add_disk()
z2ram: add error handling support for add_disk()
nvdimm/pmem: use add_disk() error handling
nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned
nvdimm/blk: add error handling support for add_disk()
nvdimm/blk: avoid calling del_gendisk() on early failures
nvdimm/btt: add error handling support for add_disk()
nvdimm/btt: use goto error labels on btt_blk_init()
loop: Remove duplicate assignments
drbd: Fix double free problem in drbd_create_device
nvdimm/btt: do not call del_gendisk() if not needed
bcache: fix use-after-free problem in bcache_device_free()
zram: replace fsync_bdev with sync_blockdev
...
-----BEGIN PGP SIGNATURE-----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=1GPi
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Set of fixes for the batched tag allocation (Ming, me)
- add_disk() error handling fix (Luis)
- Nested queue quiesce fixes (Ming)
- Shared tags init error handling fix (Ye)
- Misc cleanups (Jean, Ming, me)
* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
nvme: wait until quiesce is done
scsi: make sure that request queue queiesce and unquiesce balanced
scsi: avoid to quiesce sdev->request_queue two times
blk-mq: add one API for waiting until quiesce is done
blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
block: fix device_add_disk() kobject_create_and_add() error handling
block: ensure cached plug request matches the current queue
block: move queue enter logic into blk_mq_submit_bio()
block: make bio_queue_enter() fast-path available inline
block: split request allocation components into helpers
block: have plug stored requests hold references to the queue
blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
blk-mq: add RQF_ELV debug entry
blk-mq: only try to run plug merge if request has same queue with incoming bio
block: move RQF_ELV setting into allocators
dm: don't stop request queue after the dm device is suspended
block: replace always false argument with 'false'
block: assign correct tag before doing prefetch of request
blk-mq: fix redundant check of !e expression
