Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
For referring to the device, introduce snd_card pointer to struct
snd_es18xx.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-26-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
For referring to the device, introduce snd_card pointer to struct
snd_es1688.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-25-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-24-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-23-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-22-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-21-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Use the standard print API instead of open-coded printk().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-20-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-19-tiwai@suse.de
There are quite a few commented-out debug prints that have never been
used in the production code. Let's rip them off for code cleanness.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-18-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-17-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-16-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-15-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The commented old debug prints are dropped, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-12-tiwai@suse.de
The vx_core.dev field has never been set but referred incorrectly at
firmware loading. Pass the proper device pointer from card->dev at
request_firmware(), and drop the unused dev field from vx_core, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-11-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-10-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-9-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-8-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some debug prints are cleaned up with a macro, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-7-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The commented-out debug prints got removed, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-6-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The assignment of mpu->rmidi was moved to an earlier place, so that
dev_*() can access to the proper device pointer.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-5-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-4-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-3-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-2-tiwai@suse.de
The recent extension added a new ALSA sequencer port info flag bit
SNDRV_SEQ_PORT_FLG_IS_MIDI1, but it's not reported back when
inquired. Fix it to report properly.
Fixes: 0079c9d1e5 ("ALSA: ump: Handle MIDI 1.0 Function Block in MIDI 2.0 protocol")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-7-tiwai@suse.de
When a sequencer port assigned to a UMP Group that is specific to MIDI
1.0 among MIDI 2.0 client, mark it explicitly in the proc output, so
that user can see it easily. This is an exceptional case where the
message isn't converted to MIDI 1.0 even if the client is running in
MIDI 2.0 mode.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-6-tiwai@suse.de
When a FB is created from a GTB instead of UMP FB Info inquiry, we
missed the update of the corresponding UMP Group attributes.
Export the call of updater and let it be called from the USB driver.
Fixes: 0642a3c5ca ("ALSA: ump: Update substream name from assigned FB names")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-5-tiwai@suse.de
When a MIDI 1.0 protocol is specified in a GTB entry while others are
set in MIDI 2.0, it should be seen as a legacy MIDI 1.0 port. Since
recently we allow drivers to set a flag SNDRV_UMP_BLOCK_IS_MIDI1 to a
FB for that purpose. This patch tries to set that flag when the
device shows such a configuration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-4-tiwai@suse.de
It's valid to give different protocols via multiple GTBs; e.g. a MIDI
1.0 port is embedded in a MIDI 2.0 device that talks with MIDI 2.0
protocol. However, the current driver implementation assumes only a
single protocol over the whole Endpoint, and it can't handle such a
scenario.
This patch changes the driver's behavior to parse GTBs to accept
multiple protocols. Instead of switching to the last given protocol,
it adds the protocol capability bits now. Meanwhile, the default
protocol is chosen by the first given protocol in GTBs.
Practically seen, this should be a minor issue, as new devices should
specify the protocols properly via UMP Endpoint Info messages, so this
is rather just covering a corner case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-3-tiwai@suse.de
When the protocol capability bits are changed via Endpoint Info update
notification, we should check the validity of the current protocol and
reset it if needed, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-2-tiwai@suse.de
For an invalid input value that is out of the given range, currently
USB-audio driver corrects the value silently and accepts without
errors. This is no wrong behavior, per se, but the recent kselftest
rather wants to have an error in such a case, hence a different
behavior is expected now.
This patch adds a sanity check at each control put for the standard
mixer types and returns an error if an invalid value is given.
Note that this covers only the standard mixer types. The mixer quirks
that have own control callbacks would need different coverage.
Link: https://patch.msgid.link/20240806124651.28203-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP v1.1 spec says in the section 6.2.1:
"If a UMP Endpoint declares MIDI 2.0 Protocol but a Function Block
represents a MIDI 1.0 connection, then may optionally be used for
messages to/from that Function Block."
It implies that the driver can (and should) keep MIDI 1.0 CVM
exceptionally for those FBs even if UMP Endpoint is running in MIDI
2.0 protocol, and the current driver lacks of it.
This patch extends the sequencer port info to indicate a MIDI 1.0
port, and tries to send/receive MIDI 1.0 CVM as is when this port is
the source or sink. The sequencer port flag is set by the driver at
parsing FBs and GTBs although application can set it to its own
user-space clients, too.
Link: https://patch.msgid.link/20240806070024.14301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent changes in IOMMU made the non-contiguous page allocations
as default, hence we can simply use the standard DMA allocation for
the S/G pages as well. In this patch, we simplify the code by trying
the standard DMA allocation at first, instead of
dma_alloc_noncontiguous().
For the case without IOMMU, we still need to manage the S/G pages
manually, so we keep the same fallback routines like before.
The fallback types (SNDRV_DMA_TYPE_DEV_SG_FALLBACK & co) are dropped /
folded into SNDRV_DMA_TYPE_DEV_SG and co now. The allocation via the
standard DMA call overrides the type accordingly, hence we don't have
to have extra fallback types any longer. OTOH, SNDRV_DMA_TYPE_DEV_SG
is no longer an alias but became its own type back again.
Note that this patch requires another prerequisite fix for memmalloc
helper to use the DMA API for WC pages on x86.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240801064808.31205-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The memalloc helper used a house-made code for allocation of WC pages
on x86, since the standard DMA API doesn't cover it well. Meanwhile,
the manually allocated pages won't work together with IOMMU, resulting
in faults, so we should switch to the DMA API in that case, instead.
This patch tries to switch back to DMA API for WC pages on x86, but
with some additional tweaks that are missing.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240801064808.31205-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The code path for kcontrol accesses have often nested locks of both
card's controls_rwsem and power_ref, and applies in that order.
However, what could take much longer is the latter, power_ref; it
waits for the power state of the device, and it pretty much depends on
the user's action.
This patch swaps the locking order of those locks to a more natural
way, namely, power_ref -> controls_rwsem, in order to shorten the time
of possible nested locks. For consistency, power_ref is taken always
in the top-level caller side (that is, *_user() functions and the
ioctl handler itself).
Link: https://patch.msgid.link/20240729160659.4516-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We want sometimes to keep the runtime PM disabled persistently just
like we did for the PM deny-list in the previous change, e.g. for
testing some buggy device. This patch enhances the existing
pm_blacklist option for achieving it easily.
The default behavior doesn't change -- the driver looks up the deny
list and disables the runtime PM if matches. However, when
pm_blacklist=1 option is set, now the driver disables the runtime PM
completely, just like the deny-list does.
Update the documentation for this option, too.
Link: https://patch.msgid.link/20240729141519.18398-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a runtime PM deny-list for the devices that show the problems
(typically click noises) at runtime suspend/resume, and when it
matches, the driver disables the default runtime PM. However, we
still allow the runtime PM changed via power_save module option
dynamically, and the desktop system often tweaks it. This ended up
with a re-enablement of the runtime PM that surprises users, suddenly
suffering from the noises.
This patch changes the driver behavior slightly: when the device is
listed in the deny-list, ignore the power_save option change and keep
the original (that is, off) runtime PM state.
Link: https://patch.msgid.link/20240729141519.18398-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We had a nice name scheme in ALSA sequencer UMP binding for each
sequencer port referring to each assigned Function Block name, while
the legacy rawmidi refers only to the UMP Endpoint name. It's better
to align both.
This patch moves the UMP Group attribute update functions into the
core UMP code from the sequencer binding code, and improve the
substream name of the legacy rawmidi.
Link: https://patch.msgid.link/20240729141315.18253-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
struct snd_kcontrol contains a flex array of snd_kcontrol_volatile
objects at its end, and the array size is stored in count field.
This can be annotated gracefully with __counted_by() for catching
possible array overflows.
One additional change is the order of the count field initialization;
The assignment of the count field is moved before assignment of vd[]
elements for avoiding false-positive warnings from compilers.
Link: https://patch.msgid.link/20240726152840.8629-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST fixes combo jack detection and
limits the internal microphone boost that causes clipping on this model.
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240728123601.144017-1-mavchatz@protonmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property
-----BEGIN PGP SIGNATURE-----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=Nn/d
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
Two commits are included to fix some regressions. These commits should also
be applied to the v6.10 kernel as well.
The recent integration of compiler collections introduced the technology
to check flexible array length at runtime by providing proper annotations.
In v6.10 kernel, a patch was merged into firewire subsystem to utilize it,
however the annotation was inadequate. There is also the related change for
the flexible array in sound subsystem, but it causes a regression where
the data in the payload of isochronous packet is incorrect for some
devices. These bugs are now fixed.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZqRPbgAKCRCsLtaWM8Lw
E4IDAQCr4s3/W1fwkUcxvaFKn4ngELXtZ8D2BtI0I3x+axOvggEA4NhtbSwusyKK
r3Zsyf8r9WrzIOMFASqqV7LlaiWTogI=
=eq44
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
In a commit 1d717123bb ("ALSA: firewire-lib: Avoid
-Wflex-array-member-not-at-end warning"), DEFINE_FLEX() macro was used to
handle variable length of array for header field in struct fw_iso_packet
structure. The usage of macro has a side effect that the designated
initializer assigns the count of array to the given field. Therefore
CIP_HEADER_QUADLETS (=2) is assigned to struct fw_iso_packet.header,
while the original designated initializer assigns zero to all fields.
With CIP_NO_HEADER flag, the change causes invalid length of header in
isochronous packet for 1394 OHCI IT context. This bug affects all of
devices supported by ALSA fireface driver; RME Fireface 400, 800, UCX, UFX,
and 802.
This commit fixes the bug by replacing it with the alternative version of
macro which corresponds no initializer.
Cc: stable@vger.kernel.org
Fixes: 1d717123bb ("ALSA: firewire-lib: Avoid -Wflex-array-member-not-at-end warning")
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/r/rrufondjeynlkx2lniot26ablsltnynfaq2gnqvbiso7ds32il@qk4r6xps7jh2/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240725155640.128442-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
