System takes a very long time to suspend after commit 215a22ed31
("ALSA: hda: Refactor codec PM to use direct-complete optimization"):
[ 90.065964] PM: suspend entry (s2idle)
[ 90.067337] Filesystems sync: 0.001 seconds
[ 90.185758] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 90.188713] OOM killer disabled.
[ 90.188714] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 90.190024] printk: Suspending console(s) (use no_console_suspend to debug)
[ 90.904912] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C], continue to suspend
[ 321.262505] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[ 328.426919] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[ 329.490933] ACPI: EC: interrupt blocked
That commit keeps the codec suspended during the system suspend. However,
mute/micmute LED will clear codec's direct-complete flag by
dpm_clear_superiors_direct_complete().
This doesn't play well with SOF driver. When its runtime resume is
called for system suspend, hda_codec_jack_check() schedules
jackpoll_work which uses snd_hdac_is_power_on() to check whether codec
is suspended. Because the direct-complete path isn't taken,
pm_runtime_disable() isn't called so snd_hdac_is_power_on() returns
false and jackpoll continues to run, and snd_hda_power_up_pm() cannot
power up an already suspended codec in multiple attempts, causes the
long delay on system suspend:
if (dev->power.direct_complete) {
if (pm_runtime_status_suspended(dev)) {
pm_runtime_disable(dev);
if (pm_runtime_status_suspended(dev)) {
pm_dev_dbg(dev, state, "direct-complete ");
goto Complete;
}
pm_runtime_enable(dev);
}
dev->power.direct_complete = false;
}
When direct-complete path is taken, snd_hdac_is_power_on() returns true
and hda_jackpoll_work() is skipped by accident. So this is still not
correct.
If we were to use snd_hdac_is_power_on() in system PM path,
pm_runtime_status_suspended() should be used instead of
pm_runtime_suspended(), otherwise pm_runtime_{enable,disable}() may
change the outcome of snd_hdac_is_power_on().
Because devices suspend in reverse order (i.e. child first), it doesn't
make much sense to resume an already suspended codec from audio
controller. So avoid the issue by making sure jackpoll isn't used in
system PM process.
Fixes: 215a22ed31 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-3-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify hda_codec_jack_wake_enable() to also support disable WAKEEN.
In addition, this patch also moves the WAKEEN disablement call out of
hda_codec_jack_check() into hda_codec_jack_wake_enable().
This is a preparation for next patch.
No functional change intended.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-2-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of queueing jackpoll_work, runtime resume the codec to let it
use different jack detection methods based on jackpoll_interval.
This partially matches SOF driver's behavior with commit a6e7d0a4bd
("ALSA: hda: fix jack detection with Realtek codecs when in D3"), the
difference is SOF unconditionally resumes the codec.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-1-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There could be more than one thread read/write the dsp_power_state
simultaneously (e.g. hda_dsp_d0i3_work and sof_ipc_tx_message), add a
mutex power_state_access to make sure the access to it is mutually
exclusive.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210105155640.3725238-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201216125913.16041-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Small series that addresses a problem where DSP status dump
for a failure case, ends up being printed as as debug print. This
is important information for any bug report. While at it, the series
contains a few cleanups to related code.
Ranjani Sridharan (3):
ASoC: SOF: Intel: hda: remove duplicated status dump
ASoC: SOF: modify the SOF_DBG flags
ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
sound/soc/sof/debug.c | 2 +-
sound/soc/sof/intel/byt.c | 2 +-
sound/soc/sof/intel/hda-loader.c | 19 +++++++++++++------
sound/soc/sof/intel/hda.c | 10 ++++------
sound/soc/sof/loader.c | 4 ++--
sound/soc/sof/ops.c | 2 +-
sound/soc/sof/sof-priv.h | 13 ++++++++-----
7 files changed, 30 insertions(+), 22 deletions(-)
--
2.29.2
The condition boot_iteration == HDA_FW_BOOT_ATTEMPTS to determine
the log level for the DSP status dump would only work in the case of DSP
init failure after maximum number of attempts to initialize the DSP. If
DSP init succeeds in less than HDA_FW_BOOT_ATTEMPTS attempts and FW
loading fails, the ROM status dump would end up getting logged as debug
instead of an error.
So, add a new flag, SOF_DBG_DUMP_LOG_ERROR, to explicitly specify
the log level for DSP status dump.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF_DBG_* macros are used for dual purposes right now, for the
sof_core_debug module parameter and for the dbg_dump() ops. So, separate
these two types of flags into different types to avoid confusion.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the duplicate status dump in case DSP init fails. The core will
be powered down in this case and the status dump will be invalid anyway.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expand SOF support for Alder Lake by adding ACPI machine tables
for ADL-S systems with SoundWire codecs. Modify kernel config
to choose SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE for these
platforms.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.
The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;
This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.
An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.
When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the dsp ops for ICL ops to specify the use of ICCMAX
FW boot sequence in the run op. All other ops are identical with TGL
except post_fw_run. The recommended HW programming sequence for ICL
is to power up core 3 and keep it in stall if HPRO is enabled.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the signature of stall op to specify core_mask to stall cores.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
OUTBOX_SIZE, INBOX_SIZE are defined but not being used yet. Handle
these elements to avoid warning about unknown token type.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the parse_platform_ext_manifest() op for HDA platforms to parse
the SOF_EXT_MAN_CAVS_CONFIG_CAVS_LPRO config item to determine if the FW
is configured for LPRO. The default clock configuration is assumed to be
HPRO in the absence of this item in the extended manifest.
New member clk_config_lpro is added to struct sof_intel_hda_dev to store
the FW clock config information and that this will be used later to perform
platform-specific operations in the post_fw_run op.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add parse_platform_ext_manifest() op to parse platform-specific config
data in the extended manifest.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This file content describes memory allocation status
at run-time, typically to detect memory leaks.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Values given in this dictionary describes used firmware configuration,
like feature availability, buffer size limits and similar properties.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ignore_machine field in the component driver is used to
ignore the FE DAI links defined in the machine driver,
override BE fixups and set the stream names for the
DAI links defined in the machine driver. This is required
to make SOF compatible with the legacy machine drivers.
In the case of the nocodec machine driver in SOF, there is
no need to rely upon this ignore_machine logic in the core.
Modify the machine driver to set DAI link stream names and the
BE hw_params_fixup callback appropriately.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201120141653.2160134-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module snd-intel-dspcfg, suggested by Jaroslav last year,
currently provide the means to select a PCI driver at run-time, based
on quirks, recommendations or user selection via a kernel
parameter. This capability removed a lot of confusions in
distributions and removed the need for recompilations to select legacy
HDaudio, SST or SOF drivers.
This patchset extends the concept to ACPI devices. This was driven by
the desire to at some point deprecate the Atom/SST driver for Baytrail
and Cherrytrail, which is no longer maintained by Intel. By having the
SOF driver enabled by distributions for Baytrail/Cherrytrail, we can
enable more end-user tests and make the transition easier for
distributions (likely in 2021 at this point).
This patchset provides the same solution for Broadwell, mainly to have
a single build for all Intel platforms. SOF on Broadwell remains an
option not recommended for distributions, as long as the 'catpt'
driver is maintained there is no burning desire to make SOF the
default on the three Broadwell-based platforms with the DSP
enabled.
Pierre-Louis Bossart (14):
ASoC: Intel: broadwell: add missing pm_ops
ASoC: Intel: bdw-rt5677: add missing pm_ops
ALSA: hda: intel-dsp-config: add helper for ACPI DSP driver selection
ASoC: soc-acpi: add helper to identify parent driver.
ASoC: Intel: boards: byt/cht: set card and driver name at run time
ASoC: Intel: byt/cht: set pm ops dynamically
ASoC: SOF: acpi: add dynamic selection of DSP driver
ASoC: Intel: Atom: add dynamic selection of DSP driver
ASoC: SOF: Intel: allow for coexistence between SOF and Atom/SST
drivers
ALSA: hda: intel-dsp-config: add Broadwell ACPI DSP driver selection
ASoC: Intel: broadwell: set card and driver name dynamically
ASoC: Intel: catpt: add dynamic selection of DSP driver
ASoC: SOF: Intel: allow for coexistence between SOF and catpt drivers
ALSA: hda: intel-dsp-config: ignore dsp_driver parameter for PCI
legacy devices
include/sound/intel-dsp-config.h | 7 ++
include/sound/soc-acpi.h | 6 +
sound/hda/intel-dsp-config.c | 111 +++++++++++++++++++
sound/soc/intel/Kconfig | 2 +
sound/soc/intel/atom/sst/sst_acpi.c | 8 ++
sound/soc/intel/boards/bdw-rt5650.c | 17 ++-
sound/soc/intel/boards/bdw-rt5677.c | 18 ++-
sound/soc/intel/boards/broadwell.c | 20 ++--
sound/soc/intel/boards/bytcht_cx2072x.c | 27 +++--
sound/soc/intel/boards/bytcht_da7213.c | 27 +++--
sound/soc/intel/boards/bytcht_es8316.c | 29 +++--
sound/soc/intel/boards/bytcr_rt5640.c | 30 +++--
sound/soc/intel/boards/bytcr_rt5651.c | 27 +++--
sound/soc/intel/boards/cht_bsw_max98090_ti.c | 29 +++--
sound/soc/intel/boards/cht_bsw_nau8824.c | 29 +++--
sound/soc/intel/boards/cht_bsw_rt5645.c | 38 ++++---
sound/soc/intel/boards/cht_bsw_rt5672.c | 29 +++--
sound/soc/intel/catpt/device.c | 12 ++
sound/soc/sof/intel/Kconfig | 33 +++---
sound/soc/sof/sof-acpi-dev.c | 14 ++-
20 files changed, 392 insertions(+), 121 deletions(-)
--
2.25.1
ASoC dapm controls currently don't support more than 2 channels. This is
a problem for SOF-based devices where individual volume control cannot
be provided on the 4 DMIC input path.
If we want to provide controls for more than 2 channels, this patch
suggests a simple solution based on an override of the info callback.
For example, in the case with 4 channel DMIC PGAs, a sof_info callback
would be used. Mono and stereo cases will keep using the existing dapm
info callback.
A longer-term solution would be to remove the limits to 2 channels in
ASoC/DAPM/topology. This is a topic Intel is currently looking into,
e.g. by removing the use of 'reg' and 'rreg' fields and use arrays
instead. Such changes will be rather intrusive and touch multiple codec
and platform drivers. Removing restrictions is the right thing to do,
but this will need to be done in steps with lots of validation.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201111173105.1927466-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have all the support needed for coexistence between ACPI
drivers for Broadwell, remove mutual exclusion in the Kconfig
file. The selection is done by playing with the snd_intel_dspcfg
module 'dsp_driver' parameter.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112223825.39765-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have all the support needed for coexistence between ACPI
drivers for Baytrail and Cherrytrail, remove mutual exclusion in the
Kconfig file. The selection is done by playing with the snd_intel_dsp
module parameter.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112223825.39765-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow PCI example and stop the probe when another driver is desired
for the same ACPI HID.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112223825.39765-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Part of PCM constraints are set based on DSP topology, but rest
should be set based on hardware capabilities. Add PCM constraints
for Intel platforms:
- Add constraint for the period count to be integer. This avoids
wrap-arounds of the DMA circular buffer in middle of a period.
- Align period size to dword/32bit as per HDA spec.
Both constraints are aligned with current implementation in snd-hda-intel
driver.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201118140545.2138895-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current SOF implementation limits period and buffer sizes to multiples
of period_min. Period_min is defined in topology, but is in practise set
to align with the SOF DSP timer tick (typically 1ms).
While this approach helps user-space to avoid period sizes, which are
not aligned to the DSP timer tick, it causes problems to applications
which want to align data processing size to that of ALSA period size.
One example is JACK audio server, which limits period sizes to power of
two values.
Other ALSA drivers where audio data transfer is driven by a timer tick,
like USB, do not constraint period and buffer sizes to exact multiple of
the timer tick.
To align SOF to follow the same behaviour, drop the additional alignment
constraints. As a side-effect, this patch can cause irregularity to
period wakeup timing. This happens when application chooses settings
which were previously forbidden. For example, if application configures
period size to 2^14 bytes and audio config of S32_LE/2ch/48000Hz, one
period represents 42.667ms of audio. Without this patch, this
configuration is not allowed by SOF. With the patch applied,
configuration is allowed but the wakeups are paced by the DSP timer
tick, which is typically 1ms. Application will see period wakeups with a
42/43/42/43ms repeating pattern.
Both approaches are valid within ALSA context, but relaxing the
constraints is better aligned with existing applications and other ALSA
drivers like USB audio.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201118140545.2138895-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Kconfig entries, PCI ID and chip info for Alderlake-S product.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201116142642.2106067-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_INTEL_DSP_CONFIG is selected by the HDaudio, Skylake and SOF
drivers. When the HDaudio link is not selected as a option, this
Kconfig option is not touched and will default to whatever other
drivers selected. In the case e.g. where HDaudio is compiled as
built-in, the linker will complain:
ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe':
sof-pci-dev.c:(.text+0x5c): undefined reference to
`snd_intel_dsp_driver_probe'
Adding the select for all HDaudio platforms, regardless of whether
they rely on the HDaudio link or not, solves the problem.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 82d9d54a6c ('ALSA: hda: add Intel DSP configuration / probe code')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201112164425.25603-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add periods at the end of sentences in help text.
Insert a "not" in one place.
Fix help text indentation.
Remove a duplicate "Intel(R)" in one place.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112164425.25603-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add periods at the end of sentences in help text.
Drop "a" in one place where it is not needed.
Fix a verb.
Add some capitalization.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112164425.25603-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add periods at the end of sentences in help text.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112164425.25603-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware extended data IPC and manifest structures are designed to
be extendable without breaking the driver-firmware ABI. Driver should
not raise a warning in case a new header type is detected at
firmware boot. There are already checks for IPC ABI compatibility in
snd_sof_ipc_valid() and if the versions are deemed compatible, extra
fields in IPC messages should not trigger warnings.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Karol Trzciński <karolx.trzcinski@linux.intel.com>
Link: https://lore.kernel.org/r/20201111173321.1933452-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In theory topology can be loaded in multiple steps by providing index to
snd_soc_tplg_component_load, however, from usability point of view it
doesn't make sense, as can be seen from all current users loading
topology in one go. Remove the unnecessary parameter.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should only use the type, the const attribute makes no sense in
sizeof().
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200930152026.3902186-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should only use the type, the const attribute makes no sense in
sizeof().
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200930152026.3902186-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not emit a warning for extended firmware header fields that are
not used by kernel. This creates unnecessary noise to kernel logs like:
sof-audio-pci 0000:00:1f.3: warning: unknown ext header type 3 size 0x1c
sof-audio-pci 0000:00:1f.3: warning: unknown ext header type 4 size 0x10
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201021182419.1160391-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use SOF defined callbacks (snd_sof_prepare/snd_sof_complete)
in order to update internal SOF system suspend target.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200924151518.15841-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF boots the DSP at probe and keeps it up all the time.
With this change, after booting if no one is using the DSP
the SOF core will turn off the DSP to save power.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200924151518.15841-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Series that fixes checks for 'size' in kcontrol get/put ext_bytes methods
for SOF. The gaps in these checks were discovered via cppcheck warnings
on unused variable values.
Pierre-Louis Bossart (5):
ASoC: SOF: control: fix size checks for ext_bytes control .get()
ASoC: SOF: control: fix size checks for volatile ext_bytes control
.get()
ASoC: SOF: control: add size checks for ext_bytes control .put()
ASoC: SOF: control: remove const in sizeof()
ASoC: SOF: topology: remove const in sizeof()
sound/soc/sof/control.c | 53 +++++++++++++++++++++++++++++++---------
sound/soc/sof/topology.c | 2 +-
2 files changed, 43 insertions(+), 12 deletions(-)
--
2.27.0
To provide backward compatibility to older systems, the SOF HDA driver
allows user to specify which HDMI codec driver to use at runtime via
kernel parameter. This mechanism has a subtle flaw in that it assumes
the codec drivers not to be loaded when the SOF PCI driver is loaded.
The problem is rooted in use of the hdev->type field.
snd_hdac_ext_bus_device_init() initializes this field to HDA_DEV_ASOC.
This signals the HDA core that ASoC drivers should be considered in
driver matching (hda_bus_match()). The SOF and SST drivers continue by
overriding this field to HDA_DEV_LEGACY and proceeding to load driver
modules with request_module(). Correct drivers will get loaded and
attached.
If however the codec drivers are already loaded when
snd_hdac_ext_bus_device_init() is called, the matching will not work as
expected as device type is still set to HDA_DEV_ASOC. Specifically if
hdac-hdmi is attached when machine driver is configured to use hdac-hda,
this leads to out-of-bounds memory access in
hda_dsp_hdmi_build_controls().
Fix the issue by adding codec type as a parameter to
snd_hdac_ext_bus_device_init() and ensuring type is set correctly from
the start.
Fixes: 139c7febad ("ASoC: SOF: Intel: add support for snd-hda-codec-hdmi")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921100841.2882662-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure the TLV header and size are consistent before copying from
userspace.
Fixes: c3078f5397 ('ASoC: SOF: Add Sound Open Firmware KControl support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921110814.2910477-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains twice:
sound/soc/sof/control.c:436:2: style: Assignment of function parameter
has no effect outside the function. [uselessAssignmentArg]
size -= sizeof(const struct snd_ctl_tlv);
^
sound/soc/sof/control.c:436:7: style: Variable 'size' is assigned a
value that is never used. [unreadVariable]
size -= sizeof(const struct snd_ctl_tlv);
Somehow we dropped the checks for the size argument when upstreaming
the code, somewhere between v5 and v6.
Re-add a size check to avoid providing userspace with more data that
it asked for.
Also fix all error codes, we should return -ENOSPC instead of -EINVAL.
Fixes: c3078f5397 ('ASoC: SOF: Add Sound Open Firmware KControl support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921110814.2910477-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX platforms PM is not managed via ACPI although CONFIG_ACPI
can be set. So, in order to correctly set the system target state
we introduce a flag for platforms that require to use acpi target
states.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921105038.2909899-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 783898ce68 ("ASoC: SOF: append extended data to
sof_ipc_comp_process") the process components are set to run on the
fixed core 0, this break us from scheduling components on any other DSP
core.
Since we can get the DSP core index from swidget->core, it is duplicated
to pass the extra 'core' argument for those sof_widget_load_xx()
functions.
Here removes the duplicate 'core' argument and get component core from
swidget->core directly to fix the issue mentioned above.
Fixes: 783898ce68 ("ASoC: SOF: append extended data to sof_ipc_comp_process")
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921104544.2897112-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF will support tgl-h and tgl-lp in different FW binaries due to
hardware difference, so create another dev_desc entry with FW name
of sof-tgl-h.ri and dsp_desc named tglh_chip_info for tgl-h.
Fixes: c8d2e2bfae ("ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917103609.2559916-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previous commits reduced the verbosity of errors during boot
iterations, but there are still a couple remaining which generate
false positives. Errors should only be logged when after last attempt
to download firmware failed.
Duplicating logs and assigning them different levels based on the
iteration number isn't really elegant, use macro as suggested by
Guennadi.
Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On multiple locations checks are performed of untrusted values after adding
a constant to them. This is wrong, because the addition might overflow and
the result can then pass the check, although the original value is invalid.
Fix multiple such issues by checking the actual value and not a sum of it
and a constant.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to type-cast assignments between void and other pointers in C.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases no "ret" variable is even needed, those functions always
return 0 anyway, in other cases "ret" initialisation is redundant.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to avoid reporting an error for -EACCESS when pm_runtime is
not enabled.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to avoid reporting an error for -EACCESS when pm_runtime is
not enabled.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds debug support for imx platforms. This is important in
order to gather information about the state of the DSP in case of an
oops and the reason for the oops.
This is done by checking if a message with a panic code has been placed
in the debug box, in the imx8_dsp_handle_request function from sof/imx.
If positive, the function imx8_dump, added in common, will be called.
The first step is to gather information about the registers, filename,
line number and stack by calling the imx8_get_registers, added in common.
Then the information will be printed to the console by calling the
get_status function.
Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMI product name is used to support system variants based out of
tgl_max98373_rt5682 in current implementation. Replace this DMI search with
DMI_OEM_STRING. Coreboot(BIOS used in these systems) is
setting the needed DMI_OEM_STRING field to uniquely identify these
systems.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910162705.2026036-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use inclusive language for DSP cores.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the HDA_DSP_CORE_MASK() macro and use BIT() and GENMASK()
macros directly for more clarity.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the core_power_up/down ops for HDA platforms to restrict
the core_mask to the ones allowed by chip->cores_mask. This is needed
because on some HDA platforms not all cores can be powered up/down
by the host and this must be handled internally in the FW.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the cores_mask in struct sof_intel_dsp_desc to
host_managed_cores_mask to be more indicative of the fact that
only these cores can be powered up/down by the host.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements the snd_sof_bytes_ext_volatile_get() to read the
actual parameters from DSP by sending the SOF_IPC_COMP_GET_DATA IPC
for the kcontrol of type SOF_TPLG_KCTL_BYTES_VOLATILE_RO.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200908092825.1813847-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As components can be now identified with a UUID based mechanism, the
process type is no longer required. For new DSP components, process and
its component type can be set to SOF_PROCESS_NONE and SOF_COMP_NONE.
Allow this combination in topology load, modify the load time check for
process type to reflect this.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-17-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_mux,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-16-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_process,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-15-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_tone,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-14-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_asrc,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-13-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_src,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-12-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_host,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-11-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_volume,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_mixer,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_dai, and
update the ext_data_offset, to construct the IPC for the topology load
and runtime restore.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper to allocate buffer for IPC component, configure the basic
settings, and set up the extended data for the subsequent IPC sending.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse comp_ext_tokens in the common sof_widget_ready(), and the
swidget->comp_ext will be used to construct the COMP_NEW ipc in the
subsequent commits.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add comp_ext_tokens which will be used to parse all extended tokens,
these tokens will be stored it to struct snd_sof_widget.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add member comp_ext to struct snd_sof_widget, which will be used for
topology extended tokens parsing.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Core power up involves 2 steps: The first step tries to
power up the core by setting the ADSPCS.SPA bit for the host-managed
cores. The second step involves sending the IPC to power up other
cores that are not host managed. The enabled_cores_mask should
be updated only when both these steps are successful. If the
IPC to the DSP fails, the host-managed core that was powered in
step 1 should be powered off before returning the error.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SOF supports running pipelines on secondary DSP cores in a
limited way. This patch represents the next step in SOF multi-core DSP
support, it adds checks for core ID to individual topology components.
It takes care to power up all the requested cores. More advanced DSP
core power management should be added in the future.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We want to be able to explicitly assign cores to individual pipeline
components. This patch adds a "core" parameter to widget loading
functions to be sent to the DSP for appropriate component scheduling.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify cl_stream_prepare() to return a pointer to the prepared stream
if successful or ERR_PTR() otherwise. This would simplify the error
paths in hda_dsp_cl_boot_firmware() and hda_dsp_cl_boot_firmware_iccmax()
to perform the stream cleanup after FW boot. This change also renders
the function get_stream_with_tag() redundant.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the dsp ops for TGL ops to specify the use of ICCMAX
FW boot sequence in the run op. All other ops are identical.
Also separate the TGL descriptors into a separate file to make
it easier to follow.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the FW boot sequence for platforms that are recommended
to use ICCMAX. This function uses the existing prepare and cleanup
functions for creating a specially crafted capture stream before
powering up the DSP cores.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will be used for the ICCMAX stream as well.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the signature of get_stream_with_tag() to add the direction
as an argument to extend it for using with capture streams.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some platforms, the recommended HW sequence for FW boot involves
starting a specially crafted capture stream before powering
on the DSP cores. Add a helper function to define the minimal
recommended stream programming sequence for this stream.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series includes fixes for error reporting, topology parsing and
runtime PM issues along with updates for DMIC support and IMX platforms.
Iulian Olaru (2):
ASoC: SOF: imx: Replace sdev->private with sdev->pdata->hw_pdata
ASoC: SOF: sof-of-dev: Add .arch_ops field
Jaska Uimonen (1):
ASoC: SOF: intel: hda: support also devices with 1 and 3 dmics
Keyon Jie (1):
ASoC: SOF: topology: fix the ipc_size calculation for process
component
Rander Wang (1):
ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work
Ranjani Sridharan (2):
ASoC: SOF: Intel: hda: report error only for the last ROM init
iteration
ASoC: SOF: Intel: hda: add extended rom status dump to error log
sound/soc/sof/imx/Kconfig | 2 ++
sound/soc/sof/imx/imx8.c | 17 +++++++++----
sound/soc/sof/imx/imx8m.c | 10 +++++---
sound/soc/sof/intel/hda-codec.c | 4 +--
sound/soc/sof/intel/hda-loader.c | 42 +++++++++++++++++++-------------
sound/soc/sof/intel/hda.c | 26 +++++++++++++++++++-
sound/soc/sof/topology.c | 4 +--
7 files changed, 74 insertions(+), 31 deletions(-)
--
2.25.1
Add .arch_ops field in the sof_imx8x_ops structure.
The inclusion of this field will allow the usage of functions from
sof/core.c in order to print debug information such as the registers and
a stack dump in case of a firmware ops.
The SND_SOC_SOF_XTENSA is added in the imx/Kconfig file so the compilation
is successful.
Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The correct way to save private data is to use sdev->pdata->hw_pdata.
Removed superfluous type-casts.
Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dump the extended ROM status information to the error logs
to aid with remote support. The analysis of these logs requires
access to non-public technical information.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The topology private struct is used for token parsing and its size
should not be included to the ipc_size, fix it here though it didn't
cause any real issue as the Firmware won't use this wrong-added data.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
