mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 21:54:11 +08:00
11fac7a004
63015 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
5ffe04ccd6 |
ARM SoC fixes for v5.12, part 2
Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with the
recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
should be board specific, all the mmc device instances are all there in
the SoC, and we do probe them by default so that PM runtime can idle the
devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the, recently introduced, interconnect handling in the
GENI (serial engine) driver when running off ACPI, as this causes the
GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard
and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine,
some MAINTAINERS maintainance, and a clk / reset switch to our headers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=f2ly
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with
the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
aliases should be board specific, all the mmc device instances are
all there in the SoC, and we do probe them by default so that PM
runtime can idle the devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the recently introduced interconnect handling in
the GENI (serial engine) driver when running off ACPI, as this
causes the GENI probe to fail and the Lenovo Yoga C630 to boot
without keyboard and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
our headers"
* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
MAINTAINERS: Match on allwinner keyword
MAINTAINERS: Add our new mailing-list
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
ARM: OMAP2+: Fix uninitialized sr_inst
ARM: dts: Fix swapped mmc order for omap3
ARM: OMAP2+: Fix warning for omap_init_time_of()
soc: qcom: geni: shield geni_icc_get() for ACPI boot
|
||
|
Linus Torvalds
|
f5ce0466dc |
ARM fixes for 5.12:
- Halve maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled - Fix conversion for_each_membock() to for_each_mem_range() - Fix footbridge PCI mapping - Avoid uprobes hooking on thumb instructions -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmB8eFQACgkQ9OeQG+St rGSOeA//W7unQvu7fKda6PdewSk4S35Pz5EAPwFyisYg7HQEikfhBqlLQltM+JGk z8/NewqFUHjOdOStyBZgx8ZCecmABeRVQQ8yG8IEb4n8GkgagTrXEtmXT7iF0dZQ 4S8PWbf/wgOQZ88xTRnpruIFqJZw8m4xbaQ64NbQM3f5rzMIFiuXdm84ZsUcGVWq xOCzXUcvwi8xSU0dSfp7iZ//ODE/2qs4qeQ8fTz5ZYmSQRctsGWHLnI6wbtUolFn gOu19QSkLaIh7iO+CoNvTsMQOm11hQGzyMhSix835zA9NX8K4yCvUT0ZRp6q2AI+ D7gvkkng/VD9j25govHHqkJkqXn8KNIm+SQtm+9bTcx93FpQ3Iq0627zjIOamnmR 7kGIRXL5YB8SPYpl62K8DGN05rZsb71a8lJ1sIsXrBSApB/p4H82UXEIqCWtgZGe ivOubX+X4LfLerAzwJ0w86Uh3TqFHUH61rswhJPuUFWHUw1lYgM3XnKBzJbYpQfo 9xw2nXOGvQPdn8UgJ8fBhxqtPIOaVIIZY1olCal/yN5348r1U6YuYNbwfCQ68evl lr3x0m0MxeQE0Q1E0IltOpgCR8FxNYg62HfdAtQ/W+71hh37nP1JCvION3OdQJNR QNwyRRGsLwSChVPN+YBq347YBaOHr9CmYDYDaK2ucpEwd8l6ORQ= =LKyZ -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: - Halve maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled - Fix conversion for_each_membock() to for_each_mem_range() - Fix footbridge PCI mapping - Avoid uprobes hooking on thumb instructions * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9071/1: uprobes: Don't hook on thumb instructions ARM: footbridge: fix PCI interrupt mapping ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range() ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled |
||
Fredrik Strupe
|
d2f7eca60b |
ARM: 9071/1: uprobes: Don't hook on thumb instructions
Since uprobes is not supported for thumb, check that the thumb bit is
not set when matching the uprobes instruction hooks.
The Arm UDF instructions used for uprobes triggering
(UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the
same encoding as a pair of unallocated 32-bit thumb instructions (not
UDF) when the condition code is 0b1111 (0xf). This in effect makes it
possible to trigger the uprobes functionality from thumb, and at that
using two unallocated instructions which are not permanently undefined.
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Cc: stable@vger.kernel.org
Fixes:
|
||
Arnd Bergmann
|
b9a9786a13 |
Fixes for omaps for v5.12-rc cycle
Fix swapped mmc device order also for omap3 that got changed with the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases should be board specific, all the mmc device instances are all there in the SoC, and we do probe them by default so that PM runtime can idle the devices if left enabled from the bootloader. Also included are two compiler warning fixes. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmBsLxERHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXOthw/8DOHKvlQA7kSQGGAu8nEhhQJQL/3GXUhf yflEEVwU9wqMCUe9uIyBTwoeMF2VwhP35ljoI2wI5wgB0Lu031M0NE4tofMUe23H UmTd2lI2JNdjNf3+yicI9g+2C9Gl61SD2cyv9lJyr4K/Z/r9SswU6SYFEHiDsu5R lj7Df0fJlwSRtckEHtbDLqB7k1cw2pDO/HDztUIVaaVHyTN6RhgdFUELgv7K6lD1 A2jJZo+47O7doLLPU3NS/rTgvKcIQNuF38zcl55ger8bZ4MIJsbJfiOhcTkd9H0c K4E8KnIK+8fxCnW5QsDjQwI/Id5ey45ZXXUBoVfHCKBTpmvgMtZWgpG/hgpGHDHu D8juml24l1a6VYyHnbeAaAdCai4UQB24SbZmGnhyQyVdL5knzo9hRv5zdvl30GWz C4MSG6H3pV+Mvjx6KOfZTURJFBhaukcuOf3ou4EmfogR2EdyMPyFnSZIamV4Ucm1 t9JJwdse8kP01lhlpDKmc3ffnm4341lrltqG7iX/EuOYmmso3hcXNHDe0aC/hYDI yOZYnAUy5c9jm7WZtp0wkgbxEuDZNx86b+zvDEO6vmQ3klLxO3VV9Jy8Ye7+I6v3 XKG1qpqgEQcOLNDLgNHSRMOSn/8MRj428f6DGV8h25TkSX+sZDjpLT+16OnXIcsC ZjDApshepVg= =F8MV -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.12-rc cycle Fix swapped mmc device order also for omap3 that got changed with the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases should be board specific, all the mmc device instances are all there in the SoC, and we do probe them by default so that PM runtime can idle the devices if left enabled from the bootloader. Also included are two compiler warning fixes. * tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix uninitialized sr_inst ARM: dts: Fix swapped mmc order for omap3 ARM: OMAP2+: Fix warning for omap_init_time_of() ARM: OMAP4: PM: update ROM return address for OSWR and OFF ARM: OMAP4: Fix PMIC voltage domains for bionic ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race Link: https://lore.kernel.org/r/pull-1617702755-711306@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
1180042dc6 |
Merge tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 5.12 (part 1) 2 fixes on on turris-omnia (Armada 38x based:) - Fix storm interrupt - Enable hardware buffer management as it should be Unbreak AHCI on all Marvell Armada 7k8k / CN913x platforms * tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin ARM: dts: turris-omnia: fix hardware buffer management Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts" Link: https://lore.kernel.org/r/87a6qgctit.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Marek Behún
|
a26c56ae67 |
ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin
of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode.
Without this the pin is by default in LED[2] mode, and the Marvell PHY
driver configures LED[2] into "On - Link, Blink - Activity" mode.
This fixes the issue where the pca9538 GPIO/interrupt controller (which
can't mask interrupts in HW) received too many interrupts and after a
time started ignoring the interrupt with error message:
IRQ 71: nobody cared
There is a work in progress to have the Marvell PHY driver support
parsing PHY LED nodes from OF and registering the LEDs as Linux LED
class devices. Once this is done the PHY driver can also automatically
set the pin into INTn mode if it does not find LED[2] in OF.
Until then, though, we fix this via `marvell,reg-init` DT property.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes:
|
||
Rui Salvaterra
|
5b2c7e0ae7 |
ARM: dts: turris-omnia: fix hardware buffer management
Hardware buffer management has never worked on the Turris Omnia, as the
required MBus window hadn't been reserved. Fix thusly.
Fixes:
|
||
|
Arnd Bergmann
|
230ea4c761 |
ARM: pxa: mainstone: avoid -Woverride-init warning
The default initializer at the start of the array causes a warning
when building with W=1:
In file included from arch/arm/mach-pxa/mainstone.c:47:
arch/arm/mach-pxa/mainstone.h:124:33: error: initialized field overwritten [-Werror=override-init]
124 | #define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
| ^
arch/arm/mach-pxa/mainstone.h:133:33: note: in expansion of macro 'MAINSTONE_IRQ'
133 | #define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
| ^~~~~~~~~~~~~
arch/arm/mach-pxa/mainstone.c:506:15: note: in expansion of macro 'MAINSTONE_S0_CD_IRQ'
506 | [5] = MAINSTONE_S0_CD_IRQ,
| ^~~~~~~~~~~~~~~~~~~
Rework the initializer to list each element explicitly and only once.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323130849.2362001-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
28399a5a6d |
ARM: omap1: fix building with clang IAS
The clang integrated assembler fails to build one file with a complex asm instruction: arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: error: invalid instruction, any one of the following would fix this: mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit ^ arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: armv6t2 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit ^ arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: thumb2 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit ^ The problem is that 'NR_IRQS_LEGACY' is not defined here. Apparently gas does not care because we first add and then subtract this number, leading to the immediate value to be the same regardless of the specific definition of NR_IRQS_LEGACY. Neither the way that 'gas' just silently builds this file, nor the way that clang IAS makes nonsensical suggestions for how to fix it is great. Fortunately there is an easy fix, which is to #include the header that contains the definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210308153430.2530616-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
844b85dda2 |
ARM: keystone: fix integer overflow warning
clang warns about an impossible condition when building with 32-bit
phys_addr_t:
arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
mem_end > KEYSTONE_HIGH_PHYS_END) {
~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
if (mem_start < KEYSTONE_HIGH_PHYS_START ||
~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~
Change the temporary variable to a fixed-size u64 to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20210323131814.2751750-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
89e21e1ad9 |
i.MX fixes for 5.12, round 2:
- Fix a system failure on imx6qdl-phytec-pfla02 board when booting from SD, by adding missing vmmc supply for SD interfaces. - Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBi5tIUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM63qQf9H+AmuNEw3Sm9+kW+VH3u+7cBGY0r gkdV+hc+pabC/lzkvGTJhmncW2Y35BfzuEG6Bd6s6QEEPAqtqZ0fzDZlcS444b9Z e2hLPraKo/C51SCOoAmCUd5JA3to/ZVC+zg1ZiN92SrqgBm5e3we7xvp+Qa/Rzxs ZYmzll20U4gt9Dq2HX7dSLc8F/yq6EIGEMkXPKkkDUdWXxM4qbUpN0LlzWCV529f SNppkfeA1VfB9Kb8MrawvBRldN4j3T0SWhRFZfa6LqzJEP1dy+885u+4YknMdeJc ibpab/oEAzz/yiOiTBmtNCUBFEh3Xdiwh+0Y4T5nGhRd2kFWi2TBJB7hFg== =8P0W -----END PGP SIGNATURE----- Merge tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.12, round 2: - Fix a system failure on imx6qdl-phytec-pfla02 board when booting from SD, by adding missing vmmc supply for SD interfaces. - Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition. * tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0 Link: https://lore.kernel.org/r/20210330090236.GQ22955@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
111a5a421f |
More fixes for omaps for v5.12-rc cycle
Two fixes for hangs, mmc slot order fix, and a voltage typo fix: - Remove unused duplicate sha2md5_fck clock node that can race with the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks - Add aliases for omap4/5 mmc to put the slots back into the right order again - Fix typo for bionic voltage controllers that accidentally use mpu for all instances instead of mpu, core and iva - Fix random hangs for droid4 caused by missing fix from TI Android kernel tree to do a dummy smc call on cpuidle wakeup path -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmBbHlwRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXM7bRAAhm539aZUQE0mXrLZTbVxTo4PfOaA4ToB 3ZsoHFP2QK6RwulS6J7ebHLOVE6fMmVOj2UBpXMtTsNrBrI0k/7ziAgFiunTxZGa GpKma4AoNFjz3WLjkX7XpxlEH3W/oaIW6My5UQxn827m8oTqjN9mb/b0qxLu2zAp xc0sGM5t18A/v64Bx2OY2EimrieqzreNC5YUUKTH/CZnxnii6dla1Di6tZtT6iXw ARaqNM46qrd9iV1lfjncp0a2nfWAdlR4GJ2qXCKgLjs0J9T8xquUxda33zjRiXET /4pKJPVcU9jf1er839qk2gCoqzRhJhINQWxrzEBpj/ern4XR3Z0fQ6i0oT21roMr ho6mWKYudKd6k8fua2cWqKepaOoKVDhJYvvUN/3SvxV23rf8A26NddzrfZU/7H7S IQr1cg7vM2gKlFZJ3oGUCn9SL1DNDFHLvfJYYnSLW1dB04BQHvZjjHdxyXg5wg3P 2ZUVr2dER6mF49kHvtRHu5avKw4d5KGodG/E645sZQe+g/sTQGZcIIVRhI4lsa4C VnpJfokokkGcouOoy5mipLO+gPIMNlhdp05hMGtPu/iKjo378VbS/07097k8DTaT dlS8V+lDAthS5aOf86RzsgLAcs2f0UvUNvgeXxYeN7uRxSFqE/sWg9J0pMtPISt7 zyygoqP2oT4= =QQY6 -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.12/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes More fixes for omaps for v5.12-rc cycle Two fixes for hangs, mmc slot order fix, and a voltage typo fix: - Remove unused duplicate sha2md5_fck clock node that can race with the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks - Add aliases for omap4/5 mmc to put the slots back into the right order again - Fix typo for bionic voltage controllers that accidentally use mpu for all instances instead of mpu, core and iva - Fix random hangs for droid4 caused by missing fix from TI Android kernel tree to do a dummy smc call on cpuidle wakeup path * tag 'omap-for-v5.12/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: PM: update ROM return address for OSWR and OFF ARM: OMAP4: Fix PMIC voltage domains for bionic ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race Link: https://lore.kernel.org/r/pull-1616584662-702939@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
70a6062cc2 |
This pull request contains Broadcom ARM-based SoC changes for 5.12,
please pull the following: - Florian reverts the adding of the second level interrupt controller for HDMI BSC interrupts since they collide with the main I2C controller (i2c-bcm2835). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmAsbcMACgkQh9CWnEQH BwQzMA/+OKiEhSrnMvJ2OCrvy1FQHoexapmG+i9hMW2fO7Zd2CX9we2kAVU7HC3r aGCrYAQkUbyGROx+CjjRYQJDt8XP66tgD8vMgODxq2ujfbFXSOe5xlI9OBeDaSRm RveqOM4K/2+QkxBI/LbJdT2cZwsqxud4y8xuuw0/WDRI5FypQynuaxI+uDgkSVWb cuFJ9iJuBCAUE3PxqtQr5/nbDvnsjZO6Ib/GkVulvm4/YU5o1bFcSZ4Z+tD3ip8U o+uPdO1pfb7HlLkczPMwB6zI7SKWPOnsxIxGE0sgQGWoWYeE5HQqzryeNYokLaoj Ygm3xZp6HnRfngNJ6H1dN8h95Nd1DU+Jjz6Z+PXUfrekpzdhBtSQnyQ4sxi8Jhrf 0jNxUvbJ625IduqV36xMWMW+WOKs4xLIBQ7FSqmlYjdURYBvpjHxoE1oUccBc7tc 4lBbIIxaENB+bmAS/qKFsDZWQdjkNxoSiLpBb4w2VnNE/yBePL/z9czFeawqmPc7 TIsxm8Rqozbt7btffSmZYJb7rNr//bMAR8gmmWmNvwAaJXRZdHFuPAbtONmTkXdQ yxuLtAjafHUM+j791QGAMIXwfWjfCc4ERSINuQoNm474bzCAQVsi0kUtcHrDFvQM UU+0brs3F3yGap3PkxsrId67DlgzUTCUm+/WiDzhQv9zh402f5U= =B9w6 -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.12/devicetree-part2' of https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoC changes for 5.12, please pull the following: - Florian reverts the adding of the second level interrupt controller for HDMI BSC interrupts since they collide with the main I2C controller (i2c-bcm2835). * tag 'arm-soc/for-5.12/devicetree-part2' of https://github.com/Broadcom/stblinux: Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Tony Lindgren
|
fc85dc42a3 |
ARM: OMAP2+: Fix uninitialized sr_inst
Fix uninitialized sr_inst.
Fixes:
|
||
Stefan Riedmueller
|
f57011e72f |
ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
Setting the vmmc supplies is crucial since otherwise the supplying
regulators get disabled and the SD interfaces are no longer powered
which leads to system failures if the system is booted from that SD
interface.
Fixes:
|
||
|
Linus Torvalds
|
eb3991ef2c |
ARM: SoC fixes for v5.12
Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to fix a
kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with
fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to
fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=LBps
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to
fix a kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25
with fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board
to fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27
SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for
am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates"
* tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer
MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers.
MAINTAINERS: Update some st.com email addresses to foss.st.com
ARM: dts: imx6ull: fix ubi filesystem mount failed
ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
arm64: dts: ls1012a: mark crypto engine dma coherent
arm64: dts: ls1043a: mark crypto engine dma coherent
arm64: dts: ls1046a: mark crypto engine dma coherent
ARM: imx: avic: Convert to using IRQCHIP_DECLARE
ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
ARM: dts: at91-sama5d27_som1: fix phy address to 7
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
|
||
Russell King
|
30e3b4f256 |
ARM: footbridge: fix PCI interrupt mapping
Since commit |
||
Vladimir Murzin
|
45c2f70cba |
ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range()
for_each_mem_range() uses a loop variable, yet looking into code it is
not just iteration counter but more complex entity which encodes
information about memblock. Thus condition i == 0 looks fragile.
Indeed, it broke boot of R-class platforms since it never took i == 0
path (due to i was set to 1). Fix that with restoring original flag
check.
Fixes:
|
||
Ard Biesheuvel
|
d624833f59 |
ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
The debugging code for kmap_local() doubles the number of per-CPU fixmap
slots allocated for kmap_local(), in order to use half of them as guard
regions. This causes the fixmap region to grow downwards beyond the start
of its reserved window if the supported number of CPUs is large, and collide
with the newly added virtual DT mapping right below it, which is obviously
not good.
One manifestation of this is EFI boot on a kernel built with NR_CPUS=32
and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting
in block entries below the fixmap region that the fixmap code misidentifies
as fixmap table entries, and subsequently tries to dereference using a
phys-to-virt translation that is only valid for lowmem. This results in a
cryptic splat such as the one below.
ftrace: allocating 45548 entries in 89 pages
8<--- cut here ---
Unable to handle kernel paging request at virtual address fc6006f0
pgd = (ptrval)
[fc6006f0] *pgd=80000040207003, *pmd=00000000
Internal error: Oops: a06 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382
Hardware name: Generic DT based system
PC is at cpu_ca15_set_pte_ext+0x24/0x30
LR is at __set_fixmap+0xe4/0x118
pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3
sp : c1601ed8 ip : 00400000 fp : 00800000
r10: 0000071f r9 : 00421000 r8 : 00c00000
r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f
r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0
Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
Control: 30c5387d Table: 40203000 DAC: 00000001
Process swapper (pid: 0, stack limit = 0x(ptrval))
So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also,
fix the BUILD_BUG_ON() check that was supposed to catch this, by checking
whether the region grows below the start address rather than above the end
address.
Fixes:
|
||
|
Tony Lindgren
|
a1ebdb3741 |
ARM: dts: Fix swapped mmc order for omap3
Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped
around with commit
|
||
|
Tony Lindgren
|
a3efe3f6d0 |
ARM: OMAP2+: Fix warning for omap_init_time_of()
Fix warning: no previous prototype for 'omap_init_time_of'.
Fixes:
|
||
|
Arnd Bergmann
|
67335b8d28 |
i.MX fixes for 5.12:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by independent PHY reset. - Add missing `dma-coherent` property for LayerScape device trees to fix a kernel BUG report. - Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with fw_devlink=on. - Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to fix the broken I2C GPIO recovery support. - Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval device tree to fix UBI filesystem mount failure. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBTFQ0UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM65oAgAqbLEBsKnoqYugcTaqa35XyC4JJn9 3Un19VTPMpGzb2A4S8spjBKcqQ12lH2usMwSsDCOXdUMQk5JkyR/qeEDbUrQ/IW7 jZczTPeZv2L67AJc6A7ifJfgpNlM+SU1D1bWqU9xsIDyh0k6NtYX2OXN+LlR5s+E JR5nwH8idxYoUH1V/LlF2A0MO8TEXDxi34biDzEkSTZOI/Ovv6c4IcdddQvHWDnH 5fBGPzL/Vjk4PgsPdpt4pe38yP9bBZrpOAgAvp2zynr8jJoZMdiDegliUgmK4BvY /LbitI1y792hs+R6WsOP6//DX1cKY5r7hrWWRoLGqa6e3yhJ/geIiPyxdQ== =ElXH -----END PGP SIGNATURE----- Merge tag 'imx-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.12: - Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by independent PHY reset. - Add missing `dma-coherent` property for LayerScape device trees to fix a kernel BUG report. - Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with fw_devlink=on. - Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to fix the broken I2C GPIO recovery support. - Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval device tree to fix UBI filesystem mount failure. * tag 'imx-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6ull: fix ubi filesystem mount failed ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry arm64: dts: ls1012a: mark crypto engine dma coherent arm64: dts: ls1043a: mark crypto engine dma coherent arm64: dts: ls1046a: mark crypto engine dma coherent ARM: imx: avic: Convert to using IRQCHIP_DECLARE Link: https://lore.kernel.org/r/20210318090145.GA22955@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
3848421f9d |
AT91 fixes for 5.12:
- only DT changes -- wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1 -- restrictive PIN possibilities for sam9x60 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEAbEK3+sX+gUxe5RcpMrf1MU8doFAmBI6vYACgkQcpMrf1MU 8drqxhAAwLln7DDVQaV358gRvG002lUd+REQSqJbApurXrNGrhskCtW5tzBq6tBb HRfLJP+ejq8vS8NZt/izwxFZgze9xJomv92a8saMQmeNtjWwzexY2EHXb7D0dwsE UnTl0TzLQu+fNdnj4uryUNDPUXKry7CK5/U9sUm/uYYsoX/qECzEFwgXZkRCtCFM cN0vgK0IFKHhg5v8ypCTUqViq9GeAoC/yQ9HqAV3N5I6+1uvgxQL8JUoWSQT0Ety WcguDVcEPETRpUMNLAGgQq/6MLNJxLOL42F5c5gzJEK3QMn1UiIO4lRbBAA8aRZ1 UXkbhQz8SzAMl5N+nqEWMoeYplrjEuvTQUYu+SKZKTA9uTklzr3BYsxFTUusEIby 6lHFHW8xigP0RpGY50CxeJdlwJ52R+ba2BpZRSb3l7HIxWrA2ebCn8e3YzChBehg 0Xqio+bt111zIQgdttdTo7LSHFYag1s8zVKaKXH3SSUIQmMUnUkdXc0/qvUI7DbA oJYFeF09v4ThVDxcpNIx+N+xt6C/eQAUuoC7pHLVDYwo++szqsBX8tCSdXSH/tJt StSdSvrlxhueIA6xFtjt+6DuKutwaGBWdg+rRoTLYSifmTpXx9KPfN/nzjh5jq6K BmBV8jvpWRzEJHfnjenrGrAxwCUlJz/hrryvn2GY1bnLyPxOzXU= =NBzg -----END PGP SIGNATURE----- Merge tag 'at91-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.12: - only DT changes -- wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1 -- restrictive PIN possibilities for sam9x60 * tag 'at91-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C ARM: dts: at91-sama5d27_som1: fix phy address to 7 Link: https://lore.kernel.org/r/20210310160547.55382-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
ebccfa8a74 |
Fixes for omaps for v5.12-rc cycle
Regression fixes for multiple issues found mostly caused by recent changes to drop legacy platform data and and starting to use the new prm driver reset controller: - Fix ocp interconnect bus access error reporting for omap_l3_noc by setting IRQF_NO_THREAD - Fix changed mmc slot order regression by adding mmc aliases for am335x - Fix dra7 reboot regression caused by invalid pcie reset map - Fix smartreflex init regression caused by dropped legacy data - Fix ti-sysc driver warning on unbind if reset is not deasserted - Fix flakey reset deassert for dra7 iva -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmBA7/IRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXNVYBAAnQJ6JQWEXPjvAQSy3udNYugKxJtnaLSh 1S3oxTkkxk/WO0iTUAX/in3sueGLk8+rR3jupVYjnHczz/tPvO3xN/KztmeEjZwE ELwSqoqPT5hIY6WioSeVbcUMiMqAid6amSv+bfkAEkdhhNKJ8ytWDSqSW9lGcPTe KCQYU0KkAgnkqyu+t9kI4ErH3MQWJ7krsNsSV2KxWfqETWkHB6QbtGk6KESimSBu j1MOZsn7WPTGuMZqA6h9Ylpvs5C+/Ub78eZT8O9w1OUgdCy2EUEKOPGCXZQq/m0E q+hU0w3ZJswp/HEjnhlU31IWoauq0JyAV4d4d5yLtzBlcK9rIogQQO/FVPKyiz69 o4r+lpf8odJCtb74y2MiY3IdA+5gG5hlvdyjPnupUPZs3D1VGYWEY2lhubMlKQby 4ix6wZrzizi3YoixGTJAhpzJ3TFALpwS7jLWgNvgHEBcWGTEI+i0vp2HnrKcV5oD CZeVGmfdnuXIz/dwxSHiHCyf7kBdFRoPCkmz4IYv1SEdy4nDIoUFppHe3JpOlbFn 2AC3yA//g5QoP1bZrKQ0OZS1tNMttqjo3yWRX4hCKmqvmCzqZ8Jffca9B3smdP2/ R9vQl9YY4vsrU0DgVcVhCtqAtIiMrNPQUAPwQr41f2eieF3XMgBranSDHOCODObh lM44ehpD63U= =sZVC -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.12/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.12-rc cycle Regression fixes for multiple issues found mostly caused by recent changes to drop legacy platform data and and starting to use the new prm driver reset controller: - Fix ocp interconnect bus access error reporting for omap_l3_noc by setting IRQF_NO_THREAD - Fix changed mmc slot order regression by adding mmc aliases for am335x - Fix dra7 reboot regression caused by invalid pcie reset map - Fix smartreflex init regression caused by dropped legacy data - Fix ti-sysc driver warning on unbind if reset is not deasserted - Fix flakey reset deassert for dra7 iva * tag 'omap-for-v5.12/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva bus: ti-sysc: Fix warning on unbind if reset is not deasserted ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7 ARM: dts: am33xx: add aliases for mmc interfaces bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD Link: https://lore.kernel.org/r/pull-1614868603-800959@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
dillon min
|
e4817a1b6b |
ARM: dts: imx6ull: fix ubi filesystem mount failed
For NAND Ecc layout, there is a dependency from old kernel's nand driver
setting and current. if old kernel use 4 bit ecc , we should use 4 bit
in new kernel either. else will run into following error at filesystem
mounting.
So, enable fsl,use-minimum-ecc from device tree, to fix this mismatch
[ 9.449265] ubi0: scanning is finished
[ 9.463968] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading
22528 bytes from PEB 513:4096, read only 22528 bytes, retry
[ 9.486940] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading
22528 bytes from PEB 513:4096, read only 22528 bytes, retry
[ 9.509906] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading
22528 bytes from PEB 513:4096, read only 22528 bytes, retry
[ 9.532845] ubi0 error: ubi_io_read: error -74 (ECC error) while reading
22528 bytes from PEB 513:4096, read 22528 bytes
Fixes:
|
||
Carlos Leija
|
b3d09a06d8 |
ARM: OMAP4: PM: update ROM return address for OSWR and OFF
We need to add a dummy smc call to the cpuidle wakeup path to force the ROM code to save the return address after MMU is enabled again. This is needed to prevent random hangs on secure devices like droid4. Otherwise the system will eventually hang when entering deeper SoC idle states with the core and mpu domains in open-switch retention (OSWR). The hang happens as the ROM code tries to use the earlier physical return address set by omap-headsmp.S with MMU off while waking up CPU1 again. The hangs started happening in theory already with commit |
||
|
Tony Lindgren
|
30916faa1a |
ARM: OMAP4: Fix PMIC voltage domains for bionic
We are now registering the mpu domain three times instead of registering
mpu, core and iva domains like we should.
Fixes:
|
||
Fabio Estevam
|
69cbbf6be5 |
ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
The imx6ul-evk board designer took the bad decision to tie the
two Ethernet PHY reset lines together. This prevents one Ethernet
interface to work while the other one is brought down. For example:
# ifconfig eth0 down
# [ 279.386551] fec 2188000.ethernet eth1: Link is Down
Bringing eth0 interface down also causes eth1 to be down.
The Ethernet reset lines comes from the IO expander and both come in
logic level 0 by default.
To fix this issue, remove the Ethernet PHY reset descriptions from
its respective PHY nodes and force both Ethernet PHY lines to be at
logic level 1 via gpio-hog.
Fixes:
|
||
Saravana Kannan
|
e2c1b0ff38 |
ARM: imx: avic: Convert to using IRQCHIP_DECLARE
Using IRQCHIP_DECLARE lets fw_devlink know that it should not wait for
these interrupt controllers to be populated as struct devices. Without
this change, fw_devlink=on will make the consumers of these interrupt
controllers wait for the struct device to be added and thereby block the
consumers' probes forever. Converting to IRQCHIP_DECLARE addresses boot
issues on imx25 with fw_devlink=on that were reported by Martin.
This also removes a lot of boilerplate code.
Fixes:
|
||
|
Linus Torvalds
|
70404fe303 |
A set of irqchip updates:
- Make the GENERIC_IRQ_MULTI_HANDLER configuration correct - Add a missing DT compatible string fir tge Ingenic driver - Remove the pointless debugfs_file pointer from struct irqdomain -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmBOLisTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYocIsD/oCUvQdR3WK2R73R4+ecJk9dpIG+J+m dexJ2QZ8gc8qnGqfZznrw9+JnymYfbUxUzWNM+qKUJCfpGYrf0++iopJwdHcMexh 8dyptcZDGvw65QXUxaA1L+oKDBtFUouC3pie+AGpFHSX6FlWHdTS26fQ63UZy4uO o4+sbHgiy1hEZZKB20k+WTF3e72+YPquo6VwP4lGcGjOsIq4PABmbeattF5E3Woa wXXhC40qaSpA/JDWNaaknLzyEJgDORPDflWxMJQdo/A+SqRnHCbPjOmi0rGyn3dx Ae17++DH/XsTzlLcIEe2ZeNdhIPfqNXSIssCzP8VZwLpseIJ22Ou0SRaQ0lUYutM WrgAVT5+/iSQgX8Zu5Oncr56EOwrJLSupsRd+lXvEYLBLzlBhQx5UgodnxlKP+Go PazdG52tJBapwH3Rh3Q8rJySxhfWpUUzFY/scb9IyyuqcxqFnFo7/EJqUukvJ6lA hSFr8L5jYK6U3guKySChQuDGsFkz4xInoGuTWiL21lbbV3Y86kCZ3M5Aon8maM82 nxY73u+QTj8Xj2ElXgPa/sJiw26uszcFkgEWaeBM0OtUoaEJR7O1fy3s9SRwKlLG smt92iFehSQoDJWJlujsyDewUacF1I3DS6DUlOit62P8FvWC+fEyn92aocStOtYz AlRhB/V8WDFjbg== =PG58 -----END PGP SIGNATURE----- Merge tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of irqchip updates: - Make the GENERIC_IRQ_MULTI_HANDLER configuration correct - Add a missing DT compatible string for the Ingenic driver - Remove the pointless debugfs_file pointer from struct irqdomain" * tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Add support for the JZ4760 dt-bindings/irq: Add compatible string for the JZ4760B irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly irqdomain: Remove debugfs_file from struct irq_domain |
||
|
Linus Torvalds
|
6bf8819fed |
xen: branch for v5.12-rc3
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYEsmRgAKCRCAXGG7T9hj
vsQ9AP9oN1PKbTGn9U6FR/yJtMuD2XuX8a86PnMI8iM/bnox5QEA/kLIOBknM/nF
bPDfBcb72BERKX+83qtd5153zcbhww4=
=a/rf
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fix series and a single cleanup:
- a small cleanup patch to remove unneeded symbol exports
- a series to cleanup Xen grant handling (avoiding allocations in
some cases, and using common defines for "invalid" values)
- a series to address a race issue in Xen event channel handling"
* tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/gntdev: don't needlessly use kvcalloc()
Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}
Xen/gntdev: don't needlessly allocate k{,un}map_ops[]
Xen: drop exports of {set,clear}_foreign_p2m_mapping()
xen/events: avoid handling the same event on two cpus at the same time
xen/events: don't unmask an event channel when an eoi is pending
xen/events: reset affinity of 2-level event when tearing it down
|
||
Jan Beulich
|
bce21a2b48 |
Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}
It's not helpful if every driver has to cook its own. Generalize xenbus'es INVALID_GRANT_HANDLE and pcifront's INVALID_GRANT_REF (which shouldn't have expanded to zero to begin with). Use the constants in p2m.c and gntdev.c right away, and update field types where necessary so they would match with the constants' types (albeit without touching struct ioctl_gntdev_grant_ref's ref field, as that's part of the public interface of the kernel and would require introducing a dependency on Xen's grant_table.h public header). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/db7c38a5-0d75-d5d1-19de-e5fe9f0b9c48@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
|
Jan Beulich
|
0f9b05b9a0 |
Xen: drop exports of {set,clear}_foreign_p2m_mapping()
They're only used internally, and the layering violation they contain (x86) or imply (Arm) of calling HYPERVISOR_grant_table_op() strongly advise against any (uncontrolled) use from a module. The functions also never had users except the ones from drivers/xen/grant-table.c forever since their introduction in 3.15. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/746a5cd6-1446-eda4-8b23-03c1cac30b8d@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
Nicolas Ferre
|
2c69c8a173 |
ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
Fix the whole mux-mask table according to datasheet for the sam9x60
product. Too much functions for pins were disabled leading to
misunderstandings when enabling more peripherals or taking this table
as an example for another board.
Take advantage of this fix to move the mux-mask in the SoC file where it
belongs and use lower case letters for hex numbers like everywhere in
the file.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes:
|
||
Federico Pellegrin
|
664979bba8 |
ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
According to the datasheet PA7 can be set to either function A, B or
C (see table 6-2 of DS60001579D). The previous value would permit just
configuring with function C.
Signed-off-by: Federico Pellegrin <fede@evolware.org>
Fixes:
|
||
Claudiu Beznea
|
221c3a09dd |
ARM: dts: at91-sama5d27_som1: fix phy address to 7
Fix the phy address to 7 for Ethernet PHY on SAMA5D27 SOM1. No
connection established if phy address 0 is used.
The board uses the 24 pins version of the KSZ8081RNA part, KSZ8081RNA
pin 16 REFCLK as PHYAD bit [2] has weak internal pull-down. But at
reset, connected to PD09 of the MPU it's connected with an internal
pull-up forming PHYAD[2:0] = 7.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Fixes:
|
||
Marc Zyngier
|
3e895f4cbd |
ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
ep93xx currently relies of CONFIG_ARM_VIC to select GENERIC_IRQ_MULTI_HANDLER. Given that this is logically a platform architecture property, add the selection of GENERIC_IRQ_MULTI_HANDLER at the platform level. Further patches will remove the selection from the irqchip side. Reported-by: Marc Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Tony Lindgren
|
4c9f4865f4 | Merge branch 'fixes-rc2' into fixes | ||
|
Tony Lindgren
|
77335a0401 |
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
Fix moving mmc devices with dts aliases as discussed on the lists. Without this we now have internal eMMC mmc1 show up as mmc2 compared to the earlier order of devices. Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Tony Lindgren
|
140a776833 |
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
We have a duplicate legacy clock defined for sha2md5_fck that can sometimes race with clk_disable() with the dts configured clock for OMAP4_SHA2MD5_CLKCTRL when unused clocks are disabled during boot causing an "Unhandled fault: imprecise external abort". Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Linus Torvalds
|
c5a58f877c |
xen: branch for v5.12-rc2
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYEC9gwAKCRCAXGG7T9hj vswYAP0V7gIfsbKMONeHJtmIJlVT0igtFMRMKrHL4TqEnv3mgQEAglhC+fNMmqdP WJOMxMZvkfQYhNMaodwpTlFMhnFW8As= =NiJF -----END PGP SIGNATURE----- Merge tag 'for-linus-5.12b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two security issues (XSA-367 and XSA-369)" * tag 'for-linus-5.12b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: fix p2m size in dom0 for disabled memory hotplug case xen-netback: respect gnttab_map_refs()'s return value Xen/gnttab: handle p2m update errors on a per-slot basis |
||
|
Jan Beulich
|
8310b77b48 |
Xen/gnttab: handle p2m update errors on a per-slot basis
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating error leaves the full batch in an ambiguous state as far as the caller is concerned. Instead flags respective slots as bad, unmapping what was mapped there right away. HYPERVISOR_grant_table_op()'s return value and the individual unmap slots' status fields get used only for a one-time - there's not much we can do in case of a failure. Note that there's no GNTST_enomem or alike, so GNTST_general_error gets used. The map ops' handle fields get overwritten just to be on the safe side. This is part of XSA-367. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Linus Torvalds
|
5695e51619 |
io_uring-worker.v3-2021-02-25
-----BEGIN PGP SIGNATURE-----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=oc8u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
|
||
|
Linus Torvalds
|
6fbd6cf85a |
Kbuild updates for v5.12
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmA3zhgVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsG0C4P/A5hUNFdkYI+EffAWZiHn69t0S8j
M1GQkZildKu/yOfm6hp3mNwgHmYgw0aAuch1htkJuv+5rXRtoK77yw0xKbUqNHyO
VqkJWQPVUXJbWIDiu332NaETHbFTWCnPZKGmzcbVOBHbYsXUJPp17gROQ9ke0fQN
Ae6OV5WINhoS8UnjESWb3qOO87MdQTZ+9mP+NMnVh4kV1SUeMAXLFwFll66KZTkj
GXB330N3p9L0wQVljhXpQ/YPOd76wJNPhJWJ9+hKLFbWsedovzlHb+duprh1z1xe
7LLaq9dEbXxe1Uz0qmK76lupXxilYMyUupTW9HIYtIsY8br8DIoBOG0bn46LVnuL
/m+UQNfUFCYYePT7iZQNNc1DISQJrxme3bjq0PJzZTDukNnHJVahnj9x4RoNaF8j
Dc+JME0r2i8Ccp28vgmaRgzvSsb8Xtw5icwRdwzIpyt1ubs/+tkd/GSaGzQo30Q8
m8y1WOjovHNX7OGnOaOWBGoQAX/2k/VHeAediMsPqWUoOxwsLHYxG/4KtgwbJ5vc
gu/Fyk1GRDklZPpLdYFVvz8TGnqSDogJgF+7WolJ6YvPGAUIDAfd5Ky2sWayddlm
wchc3sKDVyh3lov23h0WQVTvLO9xl+NZ6THxoAGdYeQ0DUu5OxwH8qje/UpWuo1a
DchhNN+g5pa6n56Z
=sLxb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
|
||
|
Linus Torvalds
|
e0fbd25bb3 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "Mostly existing driver fixes plus a new driver for game controllers directly connected to Nintendo 64, and an enhancement for keyboards driven by Chrome OS EC to communicate layout of the top row to userspace" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (47 commits) Input: st1232 - fix NORMAL vs. IDLE state handling Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emit Input: alps - fix spelling of "positive" ARM: dts: cros-ec-keyboard: Use keymap macros dt-bindings: input: Fix the keymap for LOCK key dt-bindings: input: Create macros for cros-ec keymap Input: cros-ec-keyb - expose function row physical map to userspace dt-bindings: input: cros-ec-keyb: Add a new property describing top row Input: applespi - fix occasional crc errors under load. Input: applespi - don't wait for responses to commands indefinitely. Input: st1232 - add IDLE state as ready condition Input: zinitix - fix return type of zinitix_init_touch() Input: i8042 - add ASUS Zenbook Flip to noselftest list Input: add missing dependencies on CONFIG_HAS_IOMEM Input: joydev - prevent potential read overflow in ioctl Input: elo - fix an error code in elo_connect() Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S Input: sur40 - fix an error code in sur40_probe() Input: elants_i2c - detect enum overflow Input: zinitix - remove unneeded semicolon ... |
||
|
Linus Torvalds
|
7d6beb71da |
idmapped-mounts-v5.12
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
|
||
|
Linus Torvalds
|
21a6ab2131 |
Modules updates for v5.12
Summary of modules changes for the 5.12 merge window:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
types were introduced between 2006 - 2008. All the of the unused symbols have
been long removed and gpl future symbols were converted to gpl quite a long
time ago, and I don't believe these export types have been used ever since.
So, I think it should be safe to retire those export types now. (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader. (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before checking
the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T29Q
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
|
||
Philip Chen
|
497c318303 |
ARM: dts: cros-ec-keyboard: Use keymap macros
The common cros-ec keymap has been defined as macros. This patch uses the macros to simply linux,keymap in cros-ec-keyboard.dtsi file. This patch also creates an alias for keyboard-controller to make it easier to override the keymap in board-specific dts later. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210115143555.v6.2.I9ec9c3c61eded22a5f7fbff838d23fc95ec7cfe0@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Linus Torvalds
|
6ff6f86bc4 |
ARM updates for 5.12-rc1:
- Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmAzrfYACgkQ9OeQG+St rGTmRQ/+MG9BO1WahlXZ9eVx6n6KmtwlzAy5m4B24GomvcXsa+T2s0Vs43hAsOQ2 f/b6n1mPlwRjAvKW8IfO243HKDE6STGbtVPae6ts586QCODs8i3MQsq4SWmM/DMk TR87hTo1zd4baVT9tkM8/UdUwQjr0yRf4ZDhcCj09tMClnV/8ZAEE9/lLkBpDoer wcuPaDtRfJhN+Pqnm8ES8KPj15nVm/GFWBFoDWZIOCjyDnl8Y/1Bnz3NeqzfwM1o O0NS/9a1tMBn7TNGkkcJCimqOLZS2OgxLND8fie0rC5fmwzVomKXE24OdXpSQCps LiGJr+iQOaX6qNqJY2h1If8F+RPwKfh4Mrk12x0MWB6Ap2iKsQ6bmtUCNatmJ4PG 5iKV5zY0SwKRYXAkXcNosEPUJqZirFHJCzrQ8IBmiSJ1cahZykWFgorDnA97kNLR Wlp2Y/037ug7EGZ0YSaXvbpuMyyjDP4TBKqBiSl7a90QYoXQg2QgcrBO3kVlh/5H Dxq9URvIpDLIGo1EUBU90kB54TUeDhJVHJWDfXNwOp4dP1Xm6b2w+d86GnUQanlC sinRut1ULMyitmIzg9F74MZKaSJ65ffEP3nZKIAlSSISQL+/bXtMDVtakVGsv1k1 w4IdACf3GqbjHig4mOX0oW7IwtyfBY+0q3udY28ASW0ujsH9qHE= =BULT -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l |
||
|
Linus Torvalds
|
4aa364443d |
A small set of clockevent fixes which fell through the cracks
before the 5.11 release:
- Ensure a clock is enabled on sh_cmt
- Trivial compile fail and compile warning fixes
-----BEGIN PGP SIGNATURE-----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=xPBh
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of clockevent fixes which fell through the cracks before
the 5.11 release:
- Ensure a clock is enabled on sh_cmt
- Trivial compile fail and compile warning fixes"
* tag 'timers-urgent-2021-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined
clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
clocksource/drivers/ixp4xx: Select TIMER_OF when needed
|