These options are useful for controlling backlight contrast via PWM.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Let the mx53 TVE driver be built by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Remove board support for the r8a7740 based Bonito board
The r8a7740 SoC support code is still kept around since it
is in use by the Armadillo800eva board which is basically a more
recent board where the design is based on Bonito.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Remove board support for the sh7372 based AP4EVB board
The sh7372 SoC support code is still kept around since it
is in use by the Mackerel board which is basically a more
recent board where the design is based on AP4EVB.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRu5FQAAoJEAf03oE53VmQB40H/RfSFjAMRak2yPSb+4Cw2038
3BQ7iDowps/jJwD7D79SZOY44X+dOMfGO5Pj9C1J61y5ThhiS3QDFnpfzHb74Cl8
AHLRI9ugG496pdKk6aWjAq4oJozDBrwznnwTJpZshrkSkfOklHjhd/Z5uTIBW3pn
gQL9tbcTmjqhemhRB160ZHaJebMZBDZgAtft4pVt2JFjXZCokkHLxpf57z4S79D9
RJ84AU/o2IlQnrcY8fwnyWiU9LNeFzEF+bhNH7XiSoN5suTAdIN6grmHvkqdbSon
GCiAGp2samBoewnSa+Je32jXdqHORnxHZ6gaZsj+WOnz8zqJG7VNpc4KCJs0Hos=
=MvZy
-----END PGP SIGNATURE-----
Merge tag 'at91-drivers' of git://github.com/at91linux/linux-at91 into next/drivers
From Nicolas Ferre:
Adding the DT support to USB gadget High-Speed aka usba.
* tag 'at91-drivers' of git://github.com/at91linux/linux-at91:
USB: gadget: atmel_usba: add DT support
USB: gadget: atmel_usba: allow multi instance
USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
ARM: at91: udpate defconfigs
ARM: at91: dt: switch to standard IRQ flag defines
ARM: at91: dt: switch to pinctrl to pre-processor
ARM: at91: dt: add pinctrl pre-processor define
ARM: at91: dt: switch to standard GPIO flag defines.
ARM: at91: dt: use #include for all device trees
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm/boot/dts/at91sam9260.dtsi
arch/arm/boot/dts/sama5d3.dtsi
Enable some new features:
* The Tegra114 SPI controller, for Dalmore's SPI flash.
* Set all the GPIO leds triggers to their "if you don't know, say X"
value, so there are some useful triggers for the gpio-leds support.
* TPS65090 charger, for Dalmore.
* ASoC RT5640 machine driver, for audio on Beaver and Dalmore.
Also, rebuild tegra_defconfig on top of linux-next. This should make it
easier to create future defconfig patches, without extraneous diffs.
This branch is based on v3.10-rc3, in order not to conflict with a
defconfig change first included there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=THJl
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/boards
From Stephen Warren:
ARM: tegra: defconfig updates
Enable some new features:
* The Tegra114 SPI controller, for Dalmore's SPI flash.
* Set all the GPIO leds triggers to their "if you don't know, say X"
value, so there are some useful triggers for the gpio-leds support.
* TPS65090 charger, for Dalmore.
* ASoC RT5640 machine driver, for audio on Beaver and Dalmore.
Also, rebuild tegra_defconfig on top of linux-next. This should make it
easier to create future defconfig patches, without extraneous diffs.
* tag 'tegra-for-3.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: defconfig updates
Signed-off-by: Olof Johansson <olof@lixom.net>
* Changes by Morimoto-san to enable MMCIF, M25P80 and RTC RX8581 for the
bockw board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRuWWxAAoJENfPZGlqN0++lz4P/iSXd+vqBvZyJupAciB1DzEr
0ahzeyVlt8XrbnO0UBCRp8DjroaO0lLXn4LHVlbL5t9Bbdl7GYkzU4CKbOgywL8c
6ZPz/XrVp0N9C4GULwXAFj9M9jjyQB0bQAS9osV+rYawvZK6V6gg6qGcM61tXSMP
MwkO1AOIK5nhXD87cjHP8FRtH6jo9vkW9k6NQt3MxqSqGTnlvSK+qERnHBD4gKyJ
jufsDpkUEr86KbFBn4E2MM9LvSUn5cG3Lb6tsfovwh2tyVcIMHsy0FPtbDRmqTZH
Znc+7bWUM6zDW2TkXIuRT3kn3Au1/lHgvpa8ayARI6lr576S99ikQK5UACoekRJ9
yLjhPm41cmjcSq8p+2p6+z+L0jMXd0zQ89GVOcLNPeoCzNwNtGUODMix0hVHoFSa
AjcN9GF4eMMyp3ApV0jNfN7W5ylQ3UhaaOA2fSRbzDHGKUB2WZl+Q5rLLRP+KqLG
GAEPKbbTWncN9PvtHvIEOcoIUxaYn6rVZ5gB+Kn3ZQqFtOtgiS8oRuj4or8l7r+v
zWQR7h5OPvu8fsA2X0X8GNj67oTwmR8BZe3mvmMYruU+Z5RNdW60IE/+CllcznSr
odeRvK1TgRcu0hoLJJwgFBZBDVNnzS9fHKm5pMZdlqpbUTSX/sxWQBky9fUpZRCO
0aEPcaz3kJWYwp40cTNl
=tkp5
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Second Round of Renesas ARM based SoC defconfig updates for v3.11
* Changes by Morimoto-san to enable MMCIF, M25P80 and RTC RX8581 for the
bockw board
* tag 'renesas-defconfig2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: bockw defconfig: add MMCIF support
ARM: shmobile: bockw defconfig: add M25P80 support
ARM: shmobile: bockw defconfig: add RTC RX8581 support
Signed-off-by: Olof Johansson <olof@lixom.net>
This series removes the hardcoded register base address for mvebu.
Depends:
- mvebu/fixes-non-critical (up to tags/fixes-non-3.11-1)
- mvebu/cleanup (up to tags/cleanup-3.11-3)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.20 (GNU/Linux)
iQEcBAABAgAGBQJRujY/AAoJEAi3KVZQDZAeQ/8H/186TUo1jWJJP/Tdp6Rg09qK
FeZeVH9YrViLO2g2iO338TlfIjshJW8HgMv8tnuJo9xLz5wtws3Dpv5BpcYoGoKs
vU/d1EZC4vJTs5IZ2fS6p0LpvV8YrUYVi9v7uPWHFx6DYGznuHPP/q8Hu6Pa0Tok
MoPNAihBYMEhePGuBQo1j3xPtteifJy/CUv5iSrAAJSEI5zGRc7QO/0ItS2gc9qy
odFZKTZnGPlp/79np4I1/cjNTRuD5kf/9IzNFxl4ZL4X7Nre9J+8IFoPU671EDw1
XMBEtf6ThO6Z8oLiVPxeHlSLO2o7xQj7VEAUoSEsiK4whJAfxFiOqIiIC5SXfDA=
=hKzx
-----END PGP SIGNATURE-----
Merge tag 'regmap-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
mvebu register map changes for v3.11
This series removes the hardcoded register base address for mvebu.
Depends:
- mvebu/fixes-non-critical (up to tags/fixes-non-3.11-1)
- mvebu/cleanup (up to tags/cleanup-3.11-3)
* tag 'regmap-3.11' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: disable DEBUG_LL/EARLY_PRINTK in defconfig
arm: mvebu: add another earlyprintk Kconfig option
arm: mvebu: don't hardcode the physical address for mvebu-mbus
arm: mvebu: don't hardcode a physical address in headsmp.S
arm: mvebu: remove hardcoded static I/O mapping
arm: mvebu: move cache and mvebu-mbus initialization later
arm: mvebu: avoid hardcoded virtual address in coherency code
arm: mvebu: remove dependency of SMP init on static I/O mapping
arm: mvebu: fix length of Ethernet registers area in .dtsi
arm: mvebu: fix length of SATA registers area in .dtsi
arm: mvebu: mark functions of armada-370-xp.c as static
ARM: mvebu: Remove init_irq declaration in machine description
ARM: Orion: Remove redundant init_dma_coherent_pool_size()
Signed-off-by: Olof Johansson <olof@lixom.net>
Now that we have two different addresses for the UART, depending on
which bootloader is used, it is no longer desirable to enable
earlyprintk by default in the defconfig. Users who need earlyprintk
support will have to enable it explicitly, and select the right UART
configuration depending on their platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Enable some new features:
* The Tegra114 SPI controller, for Dalmore's SPI flash.
* Set all the GPIO leds triggers to their "if you don't know, say X"
value, so there are some useful triggers for the gpio-leds support.
* TPS65090 charger, for Dalmore.
* ASoC RT5640 machine driver, for audio on Beaver and Dalmore.
Also, rebuild tegra_defconfig on top of linux-next. This should make it
easier to create future defconfig patches, without extraneous diffs.
This should introduce no changes; simply moving entries around due to
Kconfig ordering changes. The apparent exceptions are:
* AUTO_ZRELADDR: Selected by ARM multi-platform support.
* MTD_CHAR: Removed in Kconfig.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren, squashed various patches]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
From Alexander Shiyan, this is a series of cleanups of clps711x, movig it
closer to multiplatform and cleans up a bunch of old code.
* clps711x/soc:
ARM: clps711x: Update defconfig
ARM: clps711x: Add support for SYSCON driver
ARM: clps711x: edb7211: Control LCD backlight via PWM
ARM: clps711x: edb7211: Add support for I2C
ARM: clps711x: Optimize interrupt handling
ARM: clps711x: Add clocksource framework
ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
ARM: clps711x: Move specific definitions from hardware.h to boards files
ARM: clps711x: p720t: Define PLD registers as GPIOs
ARM: clps711x: autcpu12: Move remaining specific definitions to board file
ARM: clps711x: autcpu12: Special driver for handling memory is removed
ARM: clps711x: autcpu12: Add support for NOR flash
ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
ARM: clps711x: Re-add GPIO support
GPIO: clps711x: Add DT support
GPIO: clps711x: Rewrite driver for using generic GPIO code
+ Linux 3.10-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>
The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.
The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).
As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
and private header files. The public header has only the API related
functions and types.
- The module name mailbox.ko from plat-omap is changed to
omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
mailbox_omap1.ko for OMAP1
mailbox_omap2.ko for OMAP2+
Cc: Tony Lindgren <tony@atomide.com>
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Merge 'net' bug fixes into 'net-next' as we have patches
that will build on top of them.
This merge commit includes a change from Emil Goode
(emilgoode@gmail.com) that fixes a warning that would
have been introduced by this merge. Specifically it
fixes the pingv6_ops method ipv6_chk_addr() to add a
"const" to the "struct net_device *dev" argument and
likewise update the dummy_ipv6_chk_addr() declaration.
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable Atheros 803X phy driver support in defconfig which is present in
AM335x EVM and EVM Starter Kit.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An AS3711 PMIC is used on kzm9g to supply CPU power and LCD backlight.
This patch enables it in board defconfig.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable USB platform EHCI/OHCI and common PHY drivers in 'bockw_defconfig'.
Enable USB storage driver and SCSI disk driver that it needs as well...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable CONFIG_PM_RUNTIME in 'bockw_defconfig' -- it's already used by TMU, SCI,
I2C, and Ether drivers to control the clocks...
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The r8a77740 has 9ch SCIF. It is not 8ch.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
In order to utilise all of the memory located on ux500 based devices
we have to enable HIGHMEM. Without it the kernel truncates memory down
to what's left after the PAGE_OFFSET has been applied, which doesn't
leave an awful lot, especially if we're running large rootfs' such
as full Linux desktop distributions or Android.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Calao boards update, removal of one board C file and
associated defconfig, Kconfig Makefile lines
- several Acme boards updates
- addition of watchdog, uart and pinctrl descriptions for
several products
- modification of RTC compatible string for 9x5 family
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRqRD8AAoJEAf03oE53VmQDXsIAI9uZ9Lrf3Hi5srFxMeDnJxD
LysPAz0BW+8XSC5CHCWhu8JxLtUnZy4y4yice/y2Uol0rzqb8gR40DRym/mHJF6t
zGRitG553zYe53rVGjOBX/e2sY+vhhm2slOdpxH5aB8ZES3WJxKYddqdvHhcwW3J
gzBP1S10mwspEuA7vQ+1r9k4WoGis7WVK1HLghga1yb4C/B5yFNhujZz3wweIIaw
eep55SDPiJhtVzlLOZOsVh3TZuSStyElfJTPk+UkFnz2QU1D7mJri55rPT121iGN
Vfc4NDAOyirOGTbSzY2cKSB53To8fipHRL0NzICCifkMuVzA2RWl13jOL/jo9QU=
=6Cw/
-----END PGP SIGNATURE-----
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
From Nicolas Ferre:
Big DT-centric update for AT91:
- Calao boards update, removal of one board C file and
associated defconfig, Kconfig Makefile lines
- several Acme boards updates
- addition of watchdog, uart and pinctrl descriptions for
several products
- modification of RTC compatible string for 9x5 family
* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits)
ARM: at91/dt: add pinctrl definition for at91 tc blocks
ARM: at91/dts: add the watchdog nodes for at91 boards
ARM: at91/dtsi: add the watchdog nodes for at91 SoC
ARM: at91: drop non DT: Calao USB-A96x
ARM: at91: dt: add Calao USB-A9G20 low power version
ARM: at91: dt: usb-a9263: add dataflash support
ARM: at91: dt: usb-a9263: update shutdown controller
ARM: at91: dt: usb-a9260: update shutdown controller
ARM: at91: dt: sam9260: add i2c gpio pinctrl
ARM: at91: switch Fox G20 board .dts to pre-processor defines
ARM: at91: add Acme Systems Fox G20 board
ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled
ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes
ARM: at91/at91-ariag25.dts: add RTC node
ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one
ARM: at91: udpate defconfigs
ARM: at91: dt: switch to standard IRQ flag defines
ARM: at91: dt: switch to pinctrl to pre-processor
ARM: at91: dt: add pinctrl pre-processor define
ARM: at91: dt: switch to standard GPIO flag defines.
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- kirkwood
- enable cpufreq and ondemand governor
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRpPVqAAoJEAi3KVZQDZAePOIH/3c3aPaA4az2rcSeV3q+hk8X
oVz7Nm4lS2/PMheGypUiOoF3UBZF7XuNry9Vht7oMpmToUz155AMeZ0Xs6MDwehZ
W9CbeYCvb0M2l5hFX0/elNDxhDDQ2QTZR1jB6RUXnIGDg14NxFd5wy44fApj+dMM
9XZSpd/47YvD8zC+s86pXDnxS6d5x11Do9lHXUsDMnACojoeBx1sJqQXYyoTqw7N
6yzPfRaFNZy6wogpkmAGDLACVyOp9/BoY+9n/+yav29xwBTuOUCmQqWEx9sMBEgh
8ODU+LydWOYpB7UDxi/jtfiYlLVuSpmj7XgUqwharlYnX6mIxMqolyyUxfWKlyc=
=/NE5
-----END PGP SIGNATURE-----
Merge tag 'defconfig-3.11-3' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper, mvebu defconfig changes for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'defconfig-3.11-3' of git://git.infradead.org/users/jcooper/linux:
arm: kirkwood: Enable cpufreq and ondemand on kirkwood_defconfig
arm: kirkwood: update defconfig with PCIe driver and board updates
arm: mvebu: update defconfig with PCI and USB support
ARM: Kirkwood: Enable USB 3.0 in kirkwood_defconfig
ARM: kirkwood: enable Sheevaplug DT in defconfig
ARM: mvebu: Add support for USB storage class in mvebu_defconfig
as now we have full DT support of those board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
the low power version have a mmc-spi
eanble mmc-spi and RV3029C2 RTC in at91_dt_defconfig
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Enable CONFIG_LEDS_GPIO and all options required to enable it, or make
the option useful.
Enable the simple framebuffer driver, fbconsole, and VT support.
This patch also regenerated bcm2835_defconfig, which removes two HW_RANDOM
entries, since they're enabled by default.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Here's a shorter set of fixes for 3.10, all for Samsung Exynos platforms.
It also includes a defconfig update so that exynos_defconfig provides
a meaningful set of drivers to boot an unmodified kernel on the Samsung
ARM-based Chromebooks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=TUvk
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Exynos fixes from Olof Johansson:
"Here's a shorter set of fixes for 3.10, all for Samsung Exynos
platforms.
It also includes a defconfig update so that exynos_defconfig provides
a meaningful set of drivers to boot an unmodified kernel on the
Samsung ARM-based Chromebooks."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: exynos: defconfig update
ARM: SAMSUNG: Add names to fimd0 IRQ resources
ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC
ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
ARM: dts: Enabling samsung-usb2phy driver for exynos5250
This turns on a number of configs that are useful on the Chromebook, but also
good to have on in general:
* USB host and MMC drivers(!)
* I2C GPIO arbitration driver
* CYAPA trackpad driver
* simplefb
* CROS EC and keyboard drivers
* S5M8767 driver
* MAX77686 drivers
* MAX8997 driver
* DEVTMPFS + mount
* DM_CRYPT (as module)
* CRYPTOLOOP
* HIGHMEM
* PRINTK timestamps
This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel
uart to uart 3 (which is only used to show the "uncompressing kernel"
message at boot, it seems).
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
header files. Increases readability and avoid
typos.
Update of AT91 defconfigs and merge of defconfigs for
SoC look-alike:
sam9260/9g20 and sam9261/9g10.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRljRcAAoJEAf03oE53VmQSe8H/3b23XdRp5n20KzXeUfXc9CD
mgf6RymCQOnBi7IjwDR+XBwnClRQoaLBj8ZUC4YdS32eEQ3fDdenvv4mLgwDgNYT
GWusUi/A5O/FH5sQt/ilBGGFNvvZDqdPvIxzR6ZCBWZCUn3RWcpa7iQqfeymGbgW
Nz1wqWIDPRtzxDaYqwcD0Lnsilg96uPQN/gjUHFs6R+6NIzR4mAXjU/lW7N1pczX
WMaaTQxQ1ERnbOVRqkNKiRTflQTFLOhQi0GUrztw+JoQ71FeWvEgZ8tK0JcmX+Ds
WEJj/t4FFXXekeQbPDtzYsMJ45MnLJ2r1gOZTYEKiRQO/1ipAwb4BDRO1ZCyYZo=
=9Ai8
-----END PGP SIGNATURE-----
Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup
From Nicolas Ferre:
Big update converting pinctrl to use macros and header files. Increases
readability and avoids typos.
Update of AT91 defconfigs and merge of defconfigs for the similar SoCs
sam9260/9g20 and sam9261/9g10.
* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
ARM: at91: udpate defconfigs
ARM: at91: dt: switch to standard IRQ flag defines
ARM: at91: dt: switch to pinctrl to pre-processor
ARM: at91: dt: add pinctrl pre-processor define
ARM: at91: dt: switch to standard GPIO flag defines.
ARM: at91: dt: use #include for all device trees
Signed-off-by: Olof Johansson <olof@lixom.net>
- Move clock registration to the device tree
- Support probing the MTU timer from the device tree
- Register user LED and user key in the device tree
- Update defconfig to account for user LED and user key
- Move pin control mappings to the device tree
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=wHd0
-----END PGP SIGNATURE-----
Merge tag 'nomadik-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
From Linus Walleij:
Device tree patches for the Nomadik machine:
- Move clock registration to the device tree
- Support probing the MTU timer from the device tree
- Register user LED and user key in the device tree
- Update defconfig to account for user LED and user key
- Move pin control mappings to the device tree
* tag 'nomadik-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: nomadik: move the pin configuration to DT
ARM: nomadik: add led and key for S8815
ARM: nomadik: register clocksource from device tree
ARM: nomadik: convert all clocks except timer to dt
clocksource: nomadik-mtu: support of probe
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable MMC_UNSAFE_RESUME to be accomplish a proper suspend/resume cycle
for SD/SDIO/(e)MMC.
ARMMMCI host driver supports clock gating through runtime PM, thus
MMC_CLKGATE is not needed. Moreover ARMMMCI can do scatter-gather which
means we can explicity disable MMC_BLOCK_BOUNCE, since it's default
enabled, to skip unnecessary bounce buffer copying.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the defconfig removing/adding selections due to
Kconfig changes, and select some new hardware drivers that
have been matured in the tree. For example:
- CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the
make oldconfig changes after the recent changes to
how NOHZ is handled.
- The U5500 config option is now gone as the machine is
deleted. So is the AB5500 driver.
- CPU_IDLE selected explicitly.
- LP5521 Kconfig has been moved around.
- AB8500 core is default-selected, as is the AB8500 USB
transciever.
- The battery and charging management drivers for the
AB8500 are not selected again.
- Select the crypto devices that have been shaped up
to work properly.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Enable ux500 specific USB and watchdog drivers by default on
u8500_defconfig.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds device tree hunks for the LED and userbutton on the
USB S8815 board, and set up a heartbeat trigger on the LED and
an escape key on the user button. Alter the defconfig to enable
these standard DT-enabled GPIO drivers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that we have a cpufreq driver for kirkwood, enable it in
kirkwood_defconfig and set the default governer to ondemand.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
We didn't have any fixes sent up for -rc2, so this is a slightly larger
batch. A bit all over the place platform-wise; OMAP, at91, marvell,
renesas, sunxi, ux500, etc.
I tried to summarize highlights but there isn't a whole lot to point
out. Lots of little things fixed all over. A couple of defconfig updates
due to new/changing options.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=8tMi
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We didn't have any fixes sent up for -rc2, so this is a slightly
larger batch. A bit all over the place platform-wise; OMAP, at91,
marvell, renesas, sunxi, ux500, etc.
I tried to summarize highlights but there isn't a whole lot to point
out. Lots of little things fixed all over. A couple of defconfig
updates due to new/changing options."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: at91/sama5: fix incorrect PMC pcr div definition
ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition
ARM: at91: at91sam9n12: move external irq declatation to DT
ARM: shmobile: marzen: Use error values in usb_power_*
ARM: tegra: defconfig fixes
ARM: nomadik: fix IRQ assignment for SMC ethernet
ARM: vt8500: Add missing NULL terminator in dt_compat
clk: tegra: add ac97 controller clock
clk: tegra: remove USB from clk init table
ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node
ARM: plat-orion: Fix num_resources and id for ge10 and ge11
ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
SERIAL: OMAP: Remove the slave idle handling from the driver
ARM: OMAP2+: serial: Remove the un-used slave idle hooks
ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
arm: mvebu: fix the 'ranges' property to handle PCIe
ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
...
The AK8975 Kconfig option was renamed during the 3.10 merge window.
Adjust tegra_defconfig to enable the new name, so it's not missing
useful features.
Tegra DRM support used to be enabled in the default Tegra configuration,
but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default.
Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[swarren, squashed Alex's and my changes together]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit enables the mvebu PCIe driver in kirkwood_defconfig and
updates various options related to Kirkwood boards.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Now that we have the necessary drivers and Device Tree informations to
support PCIe on Armada 370 and Armada XP, enable the CONFIG_PCI
option.
Also, since the Armada 370 Mirabox has a built-in USB XHCI controller
connected on the PCIe bus, enable the corresponding options as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same
kernel even in non DT world.
Fix the sam9261ek to allow 9g10 and sam9261 to compile together.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in
undefined instruction traps in u-boot (and boot failures) on OMAP2xxx
SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 84ebc10294 (USB: remove
CONFIG_USB_SUSPEND option) failed to remove all of the usages of
USB_SUSPEND throughout the kernel. This patch (as1677) removes the
remaining instances of that symbol.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some QNAP devices has a USB 3.0 host controller on a PCIe bus. Enable
the driver for this in the default configuration.
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Some boards can have built-in USB storage class controllers so
it's better to have this option included by default.
Currently this option is needed to support built-in USB MMC controller
found in Globalscale Mirabox board.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
- Few GPMC fixes and binding doc updates noted after sending
pull requests for the GPMC branch.
- Board fixes for beagle usb host and rx51 spi probe order
- SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
handling fixes
Then few minor things that are not strictly fixes but are good
to get out of the way:
- Add missing legacy mux registers for am/dm73x gpio
- Add detection for am33xx pg2.1 silicon
- Enable twl4030 audio modules in defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=lnij
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Omap fixes for things that were discovered during the merge window:
- Few GPMC fixes and binding doc updates noted after sending
pull requests for the GPMC branch.
- Board fixes for beagle usb host and rx51 spi probe order
- SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
handling fixes
Then few minor things that are not strictly fixes but are good
to get out of the way:
- Add missing legacy mux registers for am/dm73x gpio
- Add detection for am33xx pg2.1 silicon
- Enable twl4030 audio modules in defconfig
* tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
omap: mux: add AM/DM37x gpios
ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
ARM: OMAP2+: omap_device: use late_initcall_sync
ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
ARM: OMAP2+: only WARN if a GPMC child probe function fail
ARM: OMAP2+: only search for GPMC DT child nodes on probe
Documentation: dt: update properties in TI GPMC NAND example
Documentation: dt: update TI GPMC ethernet binding properties
Signed-off-by: Olof Johansson <olof@lixom.net>
* late/fixes:
ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP
ARM: ux500: always select ABX500_CORE
ARM: SIRF: select SMP_ON_UP only on SMP builds
ARM: SPEAr: conditionalize l2x0 support
ARM: imx: build CPU suspend code only when needed
ARM: OMAP: build SMP code only for OMAP4/5
ARM: tegra: Tegra114 needs CPU_FREQ_TABLE
ARM: default machine descriptor for multiplatform
Signed-off-by: Olof Johansson <olof@lixom.net>
Boards supported upstream all use TWL6040 as audio codec, enable the common
ASoC machine driver by default for them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This is the third and smallest of the SoC specific updates.
Changes include:
* SMP support for the Xilinx zynq platform
* Smaller imx changes
* LPAE support for mvebu
* Moving the orion5x, kirkwood, dove and mvebu platforms
to a common "mbus" driver for their internal devices.
It would be good to get feedback on the location of the "mbus"
driver. Since this is used on multiple platforms may potentially
get shared with other architectures (powerpc and arm64), it
was moved to drivers/bus/. We expect other similar drivers to
get moved to the same place in order to avoid creating more
top-level directories under drivers/ or cluttering up the
messy drivers/misc/ even more.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIVAwUAUYgifmCrR//JCVInAQLZ6A//VD38ocUx9RPC8rOgrkzQxcMTh3wFghoA
BVvS8fcAmhZYA5+GpTYBm+5XH2Jvu6Pv0hrba8TOeEhyZJxiWA6vg0cWWmnvZLDC
Q0uubhqIhv32I2Oq4uJb/VyzcCrQFrnjhw9HHphy7YlGKKBUFWrbgTaOypwbgXr9
DnB7u04DvaKcUjZb4Y0HaUDM7qWMFDPbKKF5WMZPqjocnjsiBQ2JMw+2KByliWR3
mCI+FdickpDYSVp9V9iRM6F73cItknjZIzQs1RYg/GSuPSWkWTdfzE1Blk/561Fo
QDrNDhnXHlt+bmQRKGWel2gDWBZW47Wj+XkjGpWDFh+e/l3vNJq0hrzXizuRCLSw
/2VefXyd3jNj8UWL3+GCA4dnw8fx14dgfNJ2iu7kg6l4ggwpJ05ToxabkLFlTRwy
LloDFjswiTBi75YdQRQCV/95NIxvIQIkbytPrk5zQWVwg8ZXoicgzRRUL5gifLh+
WE+zaY/A5e1fXN/XS70hvbp2ROZtfGOdunUR9XFR8KNqDoJDlqtrlV3Pjh75YY8G
JUmCKQjzfubr5WHskPBGCtsSb1455MEIFVANEtlJyOEKp6ytXfpVvrrZtAvmD6Ep
07dOqOgflnuZPk7H0JOf7mTf9L+fmNp4ubjRqcs9ZfPsEGoQFqBtpLF6JQbxUYGd
j69lW3jEM3o=
=rQsu
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates (part 3) from Arnd Bergmann:
"This is the third and smallest of the SoC specific updates. Changes
include:
- SMP support for the Xilinx zynq platform
- Smaller imx changes
- LPAE support for mvebu
- Moving the orion5x, kirkwood, dove and mvebu platforms to a common
"mbus" driver for their internal devices.
It would be good to get feedback on the location of the "mbus" driver.
Since this is used on multiple platforms may potentially get shared
with other architectures (powerpc and arm64), it was moved to
drivers/bus/. We expect other similar drivers to get moved to the
same place in order to avoid creating more top-level directories under
drivers/ or cluttering up the messy drivers/misc/ even more."
* tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
ARM: imx: reset_controller may be disabled
ARM: mvebu: Align the internal registers virtual base to support LPAE
ARM: mvebu: Limit the DMA zone when LPAE is selected
arm: plat-orion: remove addr-map code
arm: mach-mv78xx0: convert to use the mvebu-mbus driver
arm: mach-orion5x: convert to use mvebu-mbus driver
arm: mach-dove: convert to use mvebu-mbus driver
arm: mach-kirkwood: convert to use mvebu-mbus driver
arm: mach-mvebu: convert to use mvebu-mbus driver
ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
ARM i.MX53: make tve_ext_sel propagate rate change to PLL
ARM i.MX53: Remove unused tve_gate clkdev entry
ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
ARM: i.MX5: Add PATA and SRTC clocks
ARM: imx: do not bring up unavailable cores
ARM: imx: add initial imx6dl support
ARM: imx1: mm: add call to mxc_device_init
ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
...
These patches are all for Renesas shmobile, and depend on the earlier
pinctrl updates. Remarkably, this adds support for three new SoCs:
r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is
for pinctrl (using the new subsystem) and for clocks (not yet using the
common clock subsystem). The latter will have to get converted in one
of the upcoming releases, but shmobile is not ready for that yet.
The series also contains Renesas shmobile board changes, adding one
board file for each of the three new SoCs. These boards are using a
mix of classic and device-tree based probing, as there is still a lot of
infrastructure in shmobile that has not been converted to DT yet. Once
those are resolved to the degree that no board specific setup code is
needed, they can get folded into the respective SoC setup files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=xaLf
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates (part 2) from Arnd Bergmann:
"These patches are all for Renesas shmobile, and depend on the earlier
pinctrl updates. Remarkably, this adds support for three new SoCs:
r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is
for pinctrl (using the new subsystem) and for clocks (not yet using
the common clock subsystem). The latter will have to get converted in
one of the upcoming releases, but shmobile is not ready for that yet.
The series also contains Renesas shmobile board changes, adding one
board file for each of the three new SoCs. These boards are using a
mix of classic and device-tree based probing, as there is still a lot
of infrastructure in shmobile that has not been converted to DT yet.
Once those are resolved to the degree that no board specific setup
code is needed, they can get folded into the respective SoC setup files."
* tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
ARM: shmobile: use r8a7790 timer setup code on Lager
ARM: shmobile: force enable of r8a7790 arch timer
ARM: shmobile: Add second I/O range for r8a7790 PFC
ARM: shmobile: bockw: enable network settings on bootargs
ARM: shmobile: bockw: add SMSC ethernet support
ARM: shmobile: R8A7778: add Ether support
ARM: shmobile: bockw: enable SMSC ethernet on defconfig
ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()
ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()
ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
ARM: shmobile: mackerel: add interrupt names for SDHI0
ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
ARM: shmobile: mackerel: remove OCR masks, where regulators are used
ARM: shmobile: mackerel: SDHI resources do not have to be numbered
ARM: shmobile: Initial r8a7790 Lager board support
ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: APE6EVM PFC support
ARM: shmobile: APE6EVM base support
ARM: shmobile: kzm9g-reference: add ethernet support
ARM: shmobile: add R-Car M1A Bock-W platform support
...
Core:
- Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up()
at boot/initialization time if it's already happened, for performance
(faster boot time) reasons.
- Fix a bit width test failure that resulted in old eMMC cards being put
into 1-bit mode when 4-bit mode was available.
- Expose fwrev/hwrev for MMCv4 parts.
- Improve card removal logic in the case where the card's removed slowly;
we were missing card removal events if the card retained contact with
the slot pads for long enough to reply to a CMD13 while being removed.
Drivers:
- davinci_mmc: Support using PIO instead of DMA.
- dw_mmc: Add support for Exynos4412.
- mxcmmc: DT support, use slot-gpio API.
- mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support.
- sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
SiRFprimaII: unicore ARM Cortex-A9
SiRFatlas6: unicore ARM Cortex-A9
SiRFmarco: dual core ARM Cortex-A9 SMP
- sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse().
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=Pr7P
-----END PGP SIGNATURE-----
Merge tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC update from Chris Ball:
"MMC highlights for 3.10:
Core:
- Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping
mmc_power_up() at boot/initialization time if it's already
happened, for performance (faster boot time) reasons.
- Fix a bit width test failure that resulted in old eMMC cards being
put into 1-bit mode when 4-bit mode was available.
- Expose fwrev/hwrev for MMCv4 parts.
- Improve card removal logic in the case where the card's removed
slowly; we were missing card removal events if the card retained
contact with the slot pads for long enough to reply to a CMD13
while being removed.
Drivers:
- davinci_mmc: Support using PIO instead of DMA.
- dw_mmc: Add support for Exynos4412.
- mxcmmc: DT support, use slot-gpio API.
- mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property
support.
- sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
SiRFprimaII: unicore ARM Cortex-A9
SiRFatlas6: unicore ARM Cortex-A9
SiRFmarco: dual core ARM Cortex-A9 SMP
- sdhci-tegra: Add support for Tegra114 platforms, use
mmc_of_parse()"
* tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits)
mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE
mmc: core: fix init controller performance regression, updated patch
mmc: mxcmmc: enable DMA support on mpc512x
mmc: mxcmmc: constify mxcmci_devtype
mmc: mxcmmc: use slot-gpio API for write-protect detection
mmc: mxcmmc: add mpc512x SDHC support
mmc: mxcmmc: fix race conditions for host->req and host->data access
mmc: mxcmmc: DT support
mmc: dw_mmc: let device core setup the default pin configuration
mmc: mxs-mmc: add broken-cd property
mmc: mxs-mmc: add non-removable property
mmc: mxs-mmc: add cd-inverted property
mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
mmc: mxcmmc: Fix bug when card is present during boot
mmc: core: fix performance regression initializing MMC host controllers
Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully"
mmc: atmel-mci: pio hang on block errors
mmc: core: Fix bit width test failing on old eMMC cards
mmc: dw_mmc: Use pr_info instead of printk
mmc: dw_mmc: Check return value of regulator_enable
...
These changes are all for board specific files. These used to make up a
large portion of the ARM changes in the past, but as we are generalizing
the support and moving to device tree probing, this has gotten
significantly smaller. The only platform actually adding new code here
at the moment is Renesas shmobile, as they are still busy converting
their code to device tree and have not come far enough to not need it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=2cfP
-----END PGP SIGNATURE-----
Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board specific changes (part 1) from Olof Johansson:
"These changes are all for board specific files. These used to make up
a large portion of the ARM changes in the past, but as we are
generalizing the support and moving to device tree probing, this has
gotten significantly smaller.
The only platform actually adding new code here at the moment is
Renesas shmobile, as they are still busy converting their code to
device tree and have not come far enough to not need it."
* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: msm: USB_MSM_OTG needs USB_PHY
ARM: davinci: da850 evm: fix const qualifier placement
ARM: davinci: da850 board: add remoteproc support
ARM: pxa: move debug uart code
ARM: pxa: select PXA935 on saar & tavorevb
ARM: mmp: add more compatible names in gpio driver
ARM: pxa: move PXA_GPIO_TO_IRQ macro
ARM: pxa: remove cpu_is_xxx in gpio driver
ARM: Kirkwood: update Network Space Mini v2 description
ARM: Kirkwood: DT board setup for CloudBox
ARM: Kirkwood: sort board entries by ASCII-code order
ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor
omap2+: Remove useless Makefile line
omap2+: Remove useless Makefile line
ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d
ARM: OMAP1: fix omap_udc registration
ARM: davinci: use is IS_ENABLED macro
ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig
...
Commit 8a6201b9 (ARM: OMAP2+: Fix unmet direct dependencies for zoom
for 8250 serial) fixed unmet direct dependencies for 8250, but failed
to do the same for omap serial. This can cause the following warning:
warning: (ARCH_OMAP2PLUS_TYPICAL) selects SERIAL_OMAP which has
unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS &&
ARCH_OMAP2PLUS).
We should not select drivers, they should be selected by the
user. Fix the issue by removing the select and adding them to
omap2plus_defconfig instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More multiplatform enablement for ARM platforms. The ones converted in
this branch are:
- bcm2835
- cns3xxx
- sirf
- nomadik
- msx
- spear
- tegra
- ux500
We're getting close to having most of them converted!
One of the larger platforms remaining is Samsung Exynos, and there are
a bunch of supporting patches in this merge window for it. There was a
patch in this branch to a early version of multiplatform conversion,
but it ended up being reverted due to need of more bake time. The
revert commit is part of the branch since it would have required
rebasing multiple dependent branches and they were stable by then.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=4hSo
-----END PGP SIGNATURE-----
Merge tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform updates from Olof Johansson:
"More multiplatform enablement for ARM platforms. The ones converted
in this branch are:
- bcm2835
- cns3xxx
- sirf
- nomadik
- msx
- spear
- tegra
- ux500
We're getting close to having most of them converted!
One of the larger platforms remaining is Samsung Exynos, and there are
a bunch of supporting patches in this merge window for it. There was
a patch in this branch to a early version of multiplatform conversion,
but it ended up being reverted due to need of more bake time. The
revert commit is part of the branch since it would have required
rebasing multiple dependent branches and they were stable by then"
* tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
clocksource: nomadik-mtu: fix up clocksource/timer
Revert "ARM: exynos: enable multiplatform support"
ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
ARM: exynos: enable multiplatform support
rtc: s3c: make header file local
mtd: onenand/samsung: make regs-onenand.h file local
thermal/exynos: remove unnecessary header inclusions
mmc: sdhci-s3c: remove platform dependencies
ARM: samsung: move mfc device definition to s5p-dev-mfc.c
ARM: exynos: move debug-macro.S to include/debug/
ARM: exynos: prepare for sparse IRQ
ARM: exynos: introduce EXYNOS_ATAGS symbol
ARM: tegra: build assembly files with -march=armv7-a
ARM: Push selects for TWD/SCU into machine entries
ARM: ux500: build hotplug.o for ARMv7-a
ARM: ux500: move to multiplatform
ARM: ux500: make remaining headers local
ARM: ux500: make irqs.h local to platform
ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
...
This branch contains platform updates for 3.10. Among the highlights:
- Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
- New support for CSR SiRFatlas6 SoCs
- A handful of updates for NVidia T114 (a.k.a. Tegra 4)
- A bunch of updates for the shmobile platforms
- A handful of updates for davinci
- A few updates for Qualcomm MSM
- Plus a handful of other patches, defconfig updates, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=HXX3
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"This branch contains part 1 of the platform updates for 3.10. Among
the highlights:
- Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
- New support for CSR SiRFatlas6 SoCs
- A handful of updates for NVidia T114 (a.k.a. Tegra 4)
- A bunch of updates for the shmobile platforms
- A handful of updates for davinci
- A few updates for Qualcomm MSM
- Plus a handful of other patches, defconfig updates, etc."
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits)
ARM: tegra: pm: fix build error w/o PM_SLEEP
ARM: davinci: ensure global variables are declared
ARM: davinci: sram.c: fix incorrect type in assignment
ARM: davinci: da8xx dt: make file local symbols static
ARM: davinci: da8xx: add remoteproc support
ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries
ARM: socfpga: Add clock entries into device tree
ARM: socfpga: Enable soft reset
ARM: EXYNOS: replace cpumask by the corresponding macro
ARM: EXYNOS: handle properly the return values
ARM: EXYNOS: factor out the idle states
ARM: OMAP4: Enable fix for Cortex-A9 erratas
ARM: OMAP2+: Export SoC information to userspace
ARM: OMAP2+: SoC name and revision unification
ARM: OMAP2+: Move common part of late init into common function
ARM: tegra: pm: remove duplicated include from pm.c
ARM: davinci: da850: override mmc DT node device name
ARM: davinci: da850: add mmc DT entries
mmc: davinci_mmc: add DT support
ARM: SAMSUNG: check processor type before cache restoration in resume
...
Device-tree updates for 3.10. The bulk of the churn in this branch is due
to i.MX moving from C-defined pin control over to device tree, which is
a one-time conversion that will allow greater flexibility down the road.
Besides that, there's PCI-e bindings for Marvell mvebu platforms and a
handful of cleanups to tegra due to the new include file functionality
of the device tree compiler.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=8X1b
-----END PGP SIGNATURE-----
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device-tree updates from Olof Johansson:
"Part 1 of device-tree updates for 3.10. The bulk of the churn in this
branch is due to i.MX moving from C-defined pin control over to device
tree, which is a one-time conversion that will allow greater
flexibility down the road.
Besides that, there's PCI-e bindings for Marvell mvebu platforms and a
handful of cleanups to tegra due to the new include file functionality
of the device tree compiler"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits)
arm: mvebu: PCIe Device Tree informations for Armada XP GP
arm: mvebu: PCIe Device Tree informations for Armada 370 DB
arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
arm: mvebu: PCIe Device Tree informations for Armada XP DB
arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
arm: mvebu: add PCIe Device Tree informations for Armada XP
arm: mvebu: add PCIe Device Tree informations for Armada 370
ARM: sunxi: unify osc24M_fixed and osc24M
arm: vt8500: Add SDHC support to WM8505 DT
ARM: dts: Add a 64 bits version of the skeleton device tree
ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig
ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board
ARM: mvebu: Add support for NOR flash device on Armada XP-GP board
ARM: mvebu: Add Device Bus support for Armada 370/XP SoC
ARM: dts: imx6dl-wandboard: Add USB Host support
ARM: dts: imx51 cpu node
ARM: dts: Add missing imx27-phytec-phycore dtb target
ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module
ARM: i.MX51: Add PATA support
ARM: dts: Add initial support for Wandboard Dual-Lite
...
Here is a collection of cleanup patches. Among the pieces that stand out are:
- The deletion of h720x platforms
- Split of at91 non-dt platforms to their own Kconfig file to keep them separate
- General cleanups and refactoring of i.MX and MXS platforms
- Some restructuring of clock tables for OMAP
- Convertion of PMC driver for Tegra to dt-only
- Some renames of sunxi -> sun4i (Allwinner A10)
- ... plus a bunch of other stuff that I haven't mentioned
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=xCAx
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanup from Olof Johansson:
"Here is a collection of cleanup patches. Among the pieces that stand
out are:
- The deletion of h720x platforms
- Split of at91 non-dt platforms to their own Kconfig file to keep
them separate
- General cleanups and refactoring of i.MX and MXS platforms
- Some restructuring of clock tables for OMAP
- Convertion of PMC driver for Tegra to dt-only
- Some renames of sunxi -> sun4i (Allwinner A10)
- ... plus a bunch of other stuff that I haven't mentioned"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
ARM: i.MX: remove unused ARCH_* configs
ARM i.MX53: remove platform ahci support
ARM: sunxi: Rework the restart code
irqchip: sunxi: Rename sunxi to sun4i
irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro
clocksource: sunxi: Rename sunxi to sun4i
clocksource: sunxi: make use of CLKSRC_OF
clocksource: sunxi: Cleanup the timer code
ARM: at91: remove trailing semicolon from macros
ARM: at91/setup: fix trivial typos
ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"
ARM: EXYNOS: change the name of USB ohci header
ARM: SAMSUNG: Remove unnecessary code for dma
ARM: S3C24XX: Remove unused GPIO drive strength register definitions
ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412
ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410
ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards
ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"
ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"
...
- ARM big.LITTLE cpufreq driver from Viresh Kumar.
- exynos5440 cpufreq driver from Amit Daniel Kachhap.
- cpufreq core cleanup and code consolidation from Viresh Kumar and
Stratos Karafotis.
- cpufreq scalability improvement from Nathan Zimmer.
- AMD "frequency sensitivity feedback" powersave bias for the ondemand
cpufreq governor from Jacob Shin.
- cpuidle code consolidation and cleanups from Daniel Lezcano.
- ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.
- ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim,
Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.
- ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
Yasuaki Ishimatsu, and Rafael J. Wysocki.
- Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements
from Rafael J. Wysocki and Andy Shevchenko.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=H/se
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael J Wysocki:
- ARM big.LITTLE cpufreq driver from Viresh Kumar.
- exynos5440 cpufreq driver from Amit Daniel Kachhap.
- cpufreq core cleanup and code consolidation from Viresh Kumar and
Stratos Karafotis.
- cpufreq scalability improvement from Nathan Zimmer.
- AMD "frequency sensitivity feedback" powersave bias for the ondemand
cpufreq governor from Jacob Shin.
- cpuidle code consolidation and cleanups from Daniel Lezcano.
- ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.
- ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.
- ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
Yasuaki Ishimatsu, and Rafael J Wysocki.
- Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
Rafael J Wysocki and Andy Shevchenko.
* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
cpufreq: Revert incorrect commit 5800043
cpufreq: MAINTAINERS: Add co-maintainer
cpuidle: add maintainer entry
ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
ARM: s3c64xx: cpuidle: use init/exit common routine
cpufreq: pxa2xx: initialize variables
ACPI: video: correct acpi_video_bus_add error processing
SH: cpuidle: use init/exit common routine
ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
ACPI: Fix wrong parameter passed to memblock_reserve
cpuidle: fix comment format
pnp: use %*phC to dump small buffers
isapnp: remove debug leftovers
ARM: imx: cpuidle: use init/exit common routine
ARM: davinci: cpuidle: use init/exit common routine
ARM: kirkwood: cpuidle: use init/exit common routine
ARM: calxeda: cpuidle: use init/exit common routine
ARM: tegra: cpuidle: use init/exit common routine for tegra3
ARM: tegra: cpuidle: use init/exit common routine for tegra2
ARM: OMAP4: cpuidle: use init/exit common routine
...
The Kconfig entry for USB_EHCI_MSM unconditionally selects USB_MSM_OTG,
which is now only visible when USB_PHY is also enabled.
A dependency for this has been added in the USB tree, this adds the
now missing bit in the defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This just merges in the revert of multiplatform support. Not doing it by
cherry-pick since we need the same revert in the next/drivers branch.
* samsung/exynos-multiplatform:
Revert "ARM: exynos: enable multiplatform support"
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts commit bd51de53e1.
Turns out that multiplatform breaks some uses cases, such as when you
have an existing defconfig, since it adds the new EXYNOS_SINGLE config
option as a dependecy. As a result, nearly all exynos config options
will be disabled by default.
Reverting instead of rebasing since this branch is pulled in as a
dependency elsewhere.
Signed-off-by: Olof Johansson <olof@lixom.net>
The Kconfig entry for USB_OMAP unconditionally selects USB_ISP1301,
which is now only visible when USB_PHY is also enabled.
This adds an appropriate dependency and enables USB_PHY in the omap1
defconfig, avoiding these build warnings:
warning: (USB_OHCI_HCD && USB_OMAP) selects ISP1301_OMAP which has unmet direct dependencies (USB_SUPPORT && USB_PHY && I2C && ARCH_OMAP_OTG)
Also fix a Makefile typo while we're at it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig entry for USB_LPC32XX unconditionally selects USB_ISP1301,
which is now only visible when USB_PHY is also enabled.
This adds an appropriate dependency and enables USB_PHY in the msm
defconfig, avoiding these build errors:
warning: (USB_LPC32XX) selects USB_ISP1301 which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && I2C)
drivers/built-in.o: In function `usb_hcd_nxp_probe':
drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client'
drivers/built-in.o: In function `lpc32xx_udc_probe':
drivers/usb/gadget/lpc32xx_udc.c:3071: undefined reference to `isp1301_get_client'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit edc7cb2 (usb: phy: make it a menuconfig) makes USB_MXS_PHY
be a sub-item of menuconfig symbol USB_PHY. This change gets the
selection of CONFIG_USB_MXS_PHY in mxs_defconfig lost. Hence the
boot stops at the point below.
[ 1.600867] ci_hdrc ci_hdrc.0: doesn't support gadget
[ 1.606282] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 1.613522] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
Add CONFIG_USB_PHY to have the CONFIG_USB_MXS_PHY selection back to
work.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Commit edc7cb2 (usb: phy: make it a menuconfig) makes USB_MXS_PHY
be a sub-item of menuconfig symbol USB_PHY. This change gets the
selection of CONFIG_USB_MXS_PHY in imx_v6_v7_defconfig lost. Hence the
boot stops at the point below.
ci_hdrc ci_hdrc.0: doesn't support gadget
ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
Add CONFIG_USB_PHY to have the CONFIG_USB_MXS_PHY selection back to
work.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
These patches get us closer to adding multiplatform support on
the Exynos platform, they are part of a longer series of
patches. This would get all the simple stuff out of the
way, and I don't think there is a big risk of introducing
regressions with these.
A lot of the other patches have already been merged into
subsystem trees. After this series in in arm-soc, what is
left comes down to
* The ASoC conversion to dmaengine won't make it unless someone
who knows that code better steps up to do it right away. This
means that we won't have audio in a 3.10 multiplatform kernel
on Exynos, but it will still work for users that don't enable
multiplatform.
* The irqchip (combiner), clk and clksource patches are all based
on top of other changesets we pulled in from your trees, so I
would not make them part of the next/multiplatform branch. We can
apply them on top of the next/drivers branch once they are
tested successfully.
* A trivial patch is needed in the end to actually make
CONFIG_ARCH_EXYNOS visible in multiplatform configurations.
We will do that as a separate patch once everything else is
there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This makes it possible to enable the exynos platform as part of a
multiplatform kernel, in addition to keeping the single-platform
exynos support.
The multiplatform variant has a number of limitations at the moment:
* It only supports DT-enabled machines. This is not a problem in
the long run, as non-DT machines for exynos are going away.
The main problem here is that the gpio code and the exynos_eint
irqchip are not multiplatform capable but still required for
ATAGS based boot.
* The watchdog driver is still missing a conversion.
* sparsemem and memory_holes are currently not supported in
multiplatform.
The the multiplatform aware ARCH_EXYNOS Kconfig symbol is disabled
for now, as dependent patches are still pending in other
subsystem trees. We will enable it once everything comes together.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- mvebu PCIe DT support
from round 2 (no pr was sent):
- 64bit dts skeleton
- mvebu devicebus additions
- mvebu thermal nodes
- mirabox gpio leds
- orion5x xor and ehci
- use mvsdio on guruplug dt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRbEtPAAoJEAi3KVZQDZAetzwH/1POQqgPrAbK/mOkQN11StLN
Vd3I+QcA1x5GrYSwZ13HGCVoc/7ZXKBveNsKudH5lYXp1cRXQjKFz0DF4Pp+jo7S
LII7u566sg7ZjaPWBSkyh3WA2HNK4lzAXwWa+DfrDDlwRNNVBkCGQ8MlP5d22NYF
SRQLAyDo2czD0ARocoG8jLJ3tKXcxMAtfDzUSw29tsAky+IWp8eYD6xPvQusY4L1
5Wp/Y3Sjixg87Ktcj8u6fd8scvhoP+Y4gcsx/OOfYRxS/iE+ApwQKoHYnbL1xoZB
PbRaXsitZJDMoXnSMfa2ZuW3IEfKML88a64tTR1jVhvYK+/wwEwa2v84PqAiOrY=
=huPy
-----END PGP SIGNATURE-----
Merge tag 'dt-3.10-3' of git://git.infradead.org/users/jcooper/linux into next/dt
From Jason Cooper:
mvebu dt for v3.10 round 3
- mvebu PCIe DT support
from round 2 (no pr was sent):
- 64bit dts skeleton
- mvebu devicebus additions
- mvebu thermal nodes
- mirabox gpio leds
- orion5x xor and ehci
- use mvsdio on guruplug dt
* tag 'dt-3.10-3' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: PCIe Device Tree informations for Armada XP GP
arm: mvebu: PCIe Device Tree informations for Armada 370 DB
arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
arm: mvebu: PCIe Device Tree informations for Armada XP DB
arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
arm: mvebu: add PCIe Device Tree informations for Armada XP
arm: mvebu: add PCIe Device Tree informations for Armada 370
ARM: dts: Add a 64 bits version of the skeleton device tree
ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig
ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board
ARM: mvebu: Add support for NOR flash device on Armada XP-GP board
ARM: mvebu: Add Device Bus support for Armada 370/XP SoC
ARM: configs: Update mvebu defconfig for thermal
ARM: mvebu: Add thermal support to Armada 370 device tree
ARM: mvebu: Add thermal support to Armada XP device tree
arm: mvebu: Add GPIO LEDs to Mirabox board
arm: orion5x: enable xor for orion5x platform
arm: orion5x: add ehci bindings to dtsi
ARM: kirkwood: make use of DT mvsdio on guruplug board
ARM: mvebu: Add button on Armada 370 Reference Design board
- kirkwood
- Netgear ReadyNAS Duo v2
- add guruplug dt to defconfig
- Lacie Cloudbox
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRbENAAAoJEAi3KVZQDZAe9C8H/0aI3fxoFGphfi4l3L/8nOei
86WDJ548QmwHmW/2v740uNCkChYK8lYCJA8tbJn6sWCvyDU61b8YroIKwO2JpYJ9
mAgPRu1uu89bKAqGqE8VeB6Mh528+Ib11QYxhkUzKHYblKQKTYSxeKj0rMsNzYeE
8X5Ie4X/O3vwBFRPwxJu8t+aoDr8l8xTOAIxtPJZw2S7RFa1tAujmvE3rJ+EZhpb
EbL0+p0SfYuEmDXtCGIpEQAbe64mV9O0jgOPKlpAVvOvZAI4G5vxnqRLA7NMrcZJ
+GcOLRi6LEV0KkZx6W1v0BMmjSf1rORVhM58phXpnAsWJiK9zBj0gR11J5pnFMQ=
=HSXj
-----END PGP SIGNATURE-----
Merge tag 'boards-3.10' of git://git.infradead.org/users/jcooper/linux into next/boards
From Jason Cooper:
mvebu boards for v3.10
- kirkwood
- Netgear ReadyNAS Duo v2
- add guruplug dt to defconfig
- Lacie Cloudbox
* tag 'boards-3.10' of git://git.infradead.org/users/jcooper/linux:
ARM: Kirkwood: update Network Space Mini v2 description
ARM: Kirkwood: DT board setup for CloudBox
ARM: Kirkwood: sort board entries by ASCII-code order
ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig
ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
Signed-off-by: Olof Johansson <olof@lixom.net>
The msm_defconfig is quite out of date. This allows the targets we
are actively working on to be more easily build and run tested.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=Gh/Z
-----END PGP SIGNATURE-----
Merge tag 'msm-defconfig-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/boards
From David Brown:
Defconfig updates for MSM
The msm_defconfig is quite out of date. This allows the targets we
are actively working on to be more easily build and run tested.
* tag 'msm-defconfig-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
ARM: msm: enable SSBI driver in defconfig
ARM: msm: Concentrate defconfig on DT supported devices
Add CONFIG_GPIO_SYSFS as it is helpful for accessing GPIO from userspace.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch selects the devbus driver as part of the mvebu default
config, along with the required options to detect and support
CFI flash memories.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox
is a low cost NAS based on the Network Space v2.
Chipset list:
- CPU MARVELL 88F6702 1Ghz
- SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz
- 1 Ethernet Gigabit port (PHY MARVELL 88E1318)
- SPI flash, NOR 512KB
- 1 push button
- 2 LEDs (red and blue)
There is no EEPROM and no USB ports embedded.
Note that this board must not be confused with the Network Space Mini v2
which is embedded in a previous LaCie product also named CloudBox.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This patch sorts board entries in files Kconfig, Makefile and
kirkwood_defconfig by ASCII-code order.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Various new features are enabled:
* Tegra114 support.
* Various PMICs and related options for Tegra114 platforms.
* KEYBOARD_GPIO, mainly as a suspend wakeup source.
* tegra_defconfig is rebuilt based on v3.9-rc1, which causes various
layout changes.
This branch is based on v3.9-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=hXL+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc
From Stephen Warren <swarren@wwwdotorg.org>:
ARM: tegra: defconfig changes
Various new features are enabled:
* Tegra114 support.
* Various PMICs and related options for Tegra114 platforms.
* KEYBOARD_GPIO, mainly as a suspend wakeup source.
* tegra_defconfig is rebuilt based on v3.9-rc1, which causes various
layout changes.
This branch is based on v3.9-rc1.
* tag 'tegra-for-3.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: defconfig updates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* It enables the multiplatform build for mach-mxs platform.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRYoD8AAoJEFBXWFqHsHzOM40H/iwJ8kf/xWXrSKstVwszLV/U
Q0hCvUQ0lp+IvywJi+yDD+X/TCFE4lDGY0nDo5ucQouMtfVUk1DfZEjFCYQRN4q8
32fqQbeBGKwMd0I2f/jCiRRfZlWmpYU6x1j+sFNpJmjUoD92cVByjOQzFvrO9SSM
LasJUAs9ujDTXfc+/eekG8PCeCweE0cZaKJtingyEF+Ri5kNEnF/1ZmadVuVukgY
8pND1jYVTOfhdyBgYFhJIFK1xuaGX5CjJTokn86Ue8d6VqPAA/q2eD1PdHkIKZ39
erOwCuizplU8Nce9cJpAQDz73I4Cxs2qG8UPcqErvLhZNttOw52pYPvhXZXojG8=
=IJY6
-----END PGP SIGNATURE-----
Merge tag 'mxs-multiplatform-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/multiplatform
From Shawn Guo <shawn.guo@linaro.org>:
The mxs multiplatform support for 3.10:
* It enables the multiplatform build for mach-mxs platform.
* tag 'mxs-multiplatform-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: enable multiplatform build
ARM: mxs: rename debug-macro.S for multiplatform build
ARM: mxs: call mxs_pm_init() as a machine_desc hook
Conflicts:
arch/arm/Kconfig.debug
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
much all non-critical fixes for platform device initialization
that will be needed until we can drop the board-*.c files and
move to DT based boot.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=g9O/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.10/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
From Tony Lindgren <tony@atomide.com>:
Board related changes for v3.10 merge window. These are pretty
much all non-critical fixes for platform device initialization
that will be needed until we can drop the board-*.c files and
move to DT based boot.
* tag 'omap-for-v3.10/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor
omap2+: Remove useless Makefile line
omap2+: Remove useless Makefile line
ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d
ARM: OMAP1: fix omap_udc registration
Includes an update to Linux 3.9-rc6
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This branch (patch) converts BCM2835 to support being built into a
multi-platform single zImage. This mostly entails a few small Kconfig
tweaks, move the earlyprintk implementation to the standard multi-
platform location, and deleting some unnecessary files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=qoMR
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/multiplatform
From Stephen Warren <swarren@wwwdotorg.org>:
ARM: bcm2835: convert to multi-platform
This branch (patch) converts BCM2835 to support being built into a
multi-platform single zImage. This mostly entails a few small Kconfig
tweaks, move the earlyprintk implementation to the standard multi-
platform location, and deleting some unnecessary files.
* tag 'bcm2835-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
ARM: bcm2835: convert to multi-platform
Conflicts:
arch/arm/Kconfig
arch/arm/Kconfig.debug
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch enables BMP085 pressure sensor that can be
found on OMAP4 Blaze Tablet development platform
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
An update to the defconfig for the bockw board to enable SMSC ethernet.
This is based on:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-boards3-for-v3.10
The reason for using that base is that the bockw defconfig was added
in the boards branch instead of the defconfig branch, which was not ideal.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=RzhQ
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-bockw-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards2
From Simon Horman <horms+renesas@verge.net.au>:
Renesas ARM based SoC bockw defconfig updates for v3.10
An update to the defconfig for the bockw board to enable SMSC ethernet.
This is based on:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-boards3-for-v3.10
The reason for using that base is that the bockw defconfig was added
in the boards branch instead of the defconfig branch, which was not ideal.
* tag 'renesas-defconfig-bockw-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: bockw: enable SMSC ethernet on defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This branch (patch) updates bcm2835_defconfig to enable new features that
were added this kernel cycle. Namely, the SPI controller and HW random
number generator.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=GaCF
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-for-3.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc
From Stephen Warren <swarren@wwwdotorg.org>:
ARM: bcm2835: defconfig updates
This branch (patch) updates bcm2835_defconfig to enable new features that
were added this kernel cycle. Namely, the SPI controller and HW random
number generator.
* tag 'bcm2835-for-3.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
ARM: bcm2835: defconfig updates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove files that are not needed by multiplatform build, and make
necessary changes on Kconfig to enable multiplatform build.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds SMSC ethernet support on Bock-W defconfig
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Update tegra_defconfig to:
* Enable CONFIG_ARCH_TEGRA_114_SOC.
* Enable various PMIC and related options for Tegra114 platforms Dalmore
and pluto: Palmas, TPS51362, TPS65090.
* Enable KEYBOARD_GPIO, mainly as a suspend wakeup source.
* Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various
move/remove changes, and removing some entries for now-default or
selected options.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Highlights:
* Add Lager board support
* Add ape6evm board support
* Add Bock-W board support
* Mackerel MMCIF/SDHI clean ups
* Add ethernet support to kzm9g-reference
This pull request is based on a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux2-for-v3.10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-boards2-for-v3.10
The merge with renesas-pinmux2-for-v3.10 was made to provide
run-time dependencies for the following changes:
ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: APE6EVM PFC support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Zhif
-----END PGP SIGNATURE-----
Merge tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards2
Third round of Renesas ARM SoC board updates for v3.10
Highlights:
* Add Lager board support
* Add ape6evm board support
* Add Bock-W board support
* Mackerel MMCIF/SDHI clean ups
* Add ethernet support to kzm9g-reference
This pull request is based on a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux2-for-v3.10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-boards2-for-v3.10
The merge with renesas-pinmux2-for-v3.10 was made to provide
run-time dependencies for the following changes:
ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: APE6EVM PFC support
* tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (307 commits)
ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
ARM: shmobile: mackerel: add interrupt names for SDHI0
ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
ARM: shmobile: mackerel: remove OCR masks, where regulators are used
ARM: shmobile: mackerel: SDHI resources do not have to be numbered
ARM: shmobile: Initial r8a7790 Lager board support
ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: APE6EVM PFC support
ARM: shmobile: APE6EVM base support
ARM: shmobile: kzm9g-reference: add ethernet support
ARM: shmobile: add R-Car M1A Bock-W platform support
sh-pfc: r8a73a4: Remove unused GPIO bias data
ARM: shmobile: r8a73a4: Remove all GPIO enums
sh-pfc: r8a73a4: Remove function GPIOs
ARM: shmobile: r8a73a4: Remove IRQC function GPIOs
ARM: shmobile: r8a73a4: Remove SCIF function GPIOs
sh-pfc: r8a73a4: Remove IRQC function GPIOS
sh-pfc: r8a73a4: Remove SCIF function GPIOS
sh-pfc: r8a73a4: Add IRQC pin groups and functions
sh-pfc: r8a73a4: Add SCIF pin groups and functions
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the following new features:
* SPI controller driver.
* RNG driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
The thermal management driver for Armada XP/370 has been added
so we update the defconfig to reflect this.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Add basic Bock-W board support
More devices will be added on top of this patch after
PICNTRL and clock framework are in better shape.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Introduction of new Atmel Cortex-A5: SAMA5D3 family.
- Modify AT91 Kconfig to plit ARMv4/5 and ARMv7 arch
- Modify PMC driver (clocks)
- Core SAMA5 support
- Board file, DT files and defconfig
* tag 'at91-soc' of git://github.com/at91linux/linux-at91:
ARM: at91: add defconfig for SAMA5
ARM: at91: dt: add device tree files for SAMA5D3 family
ARM: at91: introduce SAMA5 support
ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch
ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation
ARM: at91: change name template in AT91_SOC_START macro
ARM: at91: renamme rm9200 dt file
ARM: at91: rename board-dt to more specific name board-dt-sam9
ARM: at91: move non DT Kconfig to Kconfig.non_dt
Signed-off-by: Olof Johansson <olof@lixom.net>
* 'gic' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
irqchip: gic: Perform the gic_secondary_init() call via CPU notifier
irqchip: gic: Call handle_bad_irq() directly
arm: Move chained_irq_(enter|exit) to a generic file
arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h
+ Linux 3.9-rc3
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch finally adds the WM8850 SoC to the multi_v7_defconfig.
We don't have a seperate defconfig for this SoC as it is only
available as a multiplatform option.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add defconfig for ape6evm. This is based loosely
on the kzm9g defconfig with fewer devices enabled.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
PM subsystem treats mmc card as removed during suspend.
If MMC is used to store the root file system, it is better to tell the kernel
not to treat it as a removable media, so select CONFIG_MMC_UNSAFE_RESUME for
such purpose.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Build CONFIG_INPUT_EVDEV as a built-in driver, as it makes easier to test
the LRADC touchscreen driver, for example, by using the 'evtest' tool.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
When the CPU_IDLE and the ARCH_KIRKWOOD options are set it is
pointless to define a new option CPU_IDLE_KIRKWOOD because it
is redundant.
The Makefile drivers directory contains a condition to compile
the cpuidle drivers:
obj-$(CONFIG_CPU_IDLE) += cpuidle/
Hence, if CPU_IDLE is not set we won't enter this directory.
This patch removes the useless Kconfig option and replaces the
condition in the Makefile by CONFIG_ARCH_KIRKWOOD.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch just adds the missing MACH_GURUPLUG_DT to kirkwood_defconfig.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reported-by: Soeren Moch <smoch@web.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available
here: http://natisbad.org/NAS/). Almost everything is supported via
provided .dts. A board-readynas.c file is nonetheless required for
device not only converted to DT (Gbit controller).
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Tested-By: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This series enables multiplatform support on the SIRF prima2/marco/atlas6
platform. The code was already quite tidy, so this is a relatively simple
change, and it follows similar changes we made to other ARMv7 based
platforms recently.
* prima2/multiplatform:
ARM: sirf: enable support in multi_v7_defconfig
ARM: sirf: enable multiplatform support
ARM: sirf: use clocksource_of infrastructure
ARM: sirf: move debug-macro.S to include/debug/sirf.S
ARM: sirf: enable sparse IRQ
ARM: sirf: move irq driver to drivers/irqchip
ARM: sirf: fix prima2 interrupt lookup
pinctrl: sirf: convert to linear irq domain
clocksource: make CLOCKSOURCE_OF_DECLARE type safe
ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board
arm: prima2: add new SiRFatlas6 machine in common board
ARM: smp_twd: convert to use CLKSRC_OF init
clocksource: tegra20: use the device_node pointer passed to init
clocksource: pass DT node pointer to init functions
clocksource: add empty version of clocksource_of_init
Conflicts:
arch/arm/configs/multi_v7_defconfig
arch/arm/mach-spear/spear13xx.c
Tested-by: Barry Song <Barry.Song@csr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the code added to the marzen board in
"ARM: shmobile: marzen: Add GPIO LEDs".
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This enables the driver added in "gpio: Renesas R-Car GPIO driver V3"
Cc: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The MTD_NAND_MUSEUM_IDS configuration options was removed - update the
lpc32xx_defconfig file.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Roland Stigge <stigge@antcom.de>
This defconfig patch enables devtmpfs and the mmc spi driver, and does a
cleanup of irrelevant driver comment on this platform
(CONFIG_NET_VENDOR_CHELSIO).
Signed-off-by: Roland Stigge <stigge@antcom.de>
This patch adjusts LPC32xx to new config:
* CONFIG_INPUT_MATRIXKMAP is selected automatically now
* Enabled some GPIO drivers
Signed-off-by: Roland Stigge <stigge@antcom.de>
Defconfig file for SAMA5 devices. It covers the SAMA5D3 family.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fix regression introduced by commit 796211b795 ("mmc: atmel-mci: add
pdc support and runtime capabilities detection") which removed the need
for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the
compile guards around dma_release_channel() in remove(). Consequently,
DMA is always enabled (if supported), but the DMA-channel is not
released on module unload unless the DMA-config option is selected.
Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
I2C. Also some cleanup of some unneeded properties and conflicting
nodes.
One more DT-only board based on at91rm9200.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRSyP1AAoJEAf03oE53VmQVr4IAJKl8rITnS3rmYYGmFo+cIGl
HkaDM7ljf726hW2bmmcTu1zQLLsdP3EY7qOmuoUN5J8uWSV67Yujc3C0ypqgC2ve
vwWEKuPB8N6utPTWl9eLCvTp+DTKDaq6otfcXFj432tWLWdc0DYKlkaiVfePSChn
hLFFeuIj3XFCIxVJ+Tz14+/b1MC+jswe4TMCvGKE3d4aZ1dgWfS9YhmNjQ0hB1rP
BW0A7RIBW366OUCzvEkKI1NZ8MzKO6ghJMeBpLHuD3I8GJGaF9NhZXi6v7SJVS9i
IdEwXdrYY+TzpllnF9imwhvPK5d6QbcqNVV5Gie+aFwZJTYt4ufPAEIH5rd67jo=
=n+O8
-----END PGP SIGNATURE-----
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
From Nicolas Ferre <nicolas.ferre@atmel.com>:
DT modifications for at91rm9200 and at91sam9x5 SoCs, mainly around
I2C. Also some cleanup of some unneeded properties and conflicting
nodes.
One more DT-only board based on at91rm9200.
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91/at91sam9x5cm: add 1-wire chip on CM board
ARM: at91/at91sam9x5ek: i2c1 and i2c2 conflict with macb and lcd
ARM: at91/dt: gpio-keys: remove address-cells and size-cells properties
ARM: at91: add MPA 1600 DT board
ARM: at91: add pinctrl nodes to i2c-gpio on RM92000 DT
ARM: at91: add TWI bindings to RM9200 DT
ARM: at91: dt: at91sam9x5: add i2c-gpio pinctrl
ARM: at91: dt: at91sam9x5: add i2c pinctrl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The platform was merged about 10 years ago, and has seen few updates
for most of the time since. The people that merged the code seem
no longer interested in it either, so let's remove it now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Robert Schwebel <r.schwebel@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Newer filesystems like Fedora-18 don't support kernels where
cgroups is not enabled.
Enable it in defconfig so users don't have to enable
it themselves.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
EXT4 file system and LBDAF are used commonly, should be enabled by default.
Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The heartbeat LED trigger provides an excellent debugging tool
when hacking on development boards. Here we enable it on all
u8500 based platforms. This will pulse the User LED on the
Snowball low-cost development board only.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The spear platform has been cleaned up a lot by Viresh
Kumar, and is relatively easy to convert to multiplatform,
getting us one more step closer to having all ARMv7
platforms included.
I originally did this before 3.8 but merging it never
worked out so far, mostly because of conflicts against
patches in the DMA tree, but also because I did not push very
hard for these.
* spear/multiplatform:
ARM: spear: enable spear13xx in multi_v7_defconfig
ARM: spear: fix build error in restart.c
ARM: spear: use multiplatform configuration options.
ARM: spear: rename duplicate pl080_plat_data
ARM: spear: make clock driver independent of headers
ARM: spear: move generic.h and pl080.h into private dir
ARM: spear: move all files to mach-spear
ARM: spear: move spear.h and misc_regs.h into plat-spear
ARM: spear: merge Kconfig files
ARM: spear: make spear3xx/6xx mach/spear.h files identical
ARM: spear: move identical headers to plat-spear/include/mach
ARM: spear: unify mach/generic.h and mach/irqs.h
ARM: spear13xx: make mach/dma.h local
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I've looked at all the platforms recently to see what their
state is. cns3xxx seems quite clean but not very actively
maintained. Since it is really easy to convert to multiplatform,
that's what I did here.
* cns3xxx/multiplatform:
ARM: cns3xxx: initial DT support
ARM: cns3xxx: enable multiplatform support
ARM: cns3xxx: move debug_ll code to include/debug/
ARM: cns3xxx: enable sparse IRQ support
ARM: cns3xxx: make mach header files local
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This moves the cns3xxx configuration option inside of ARCH_MULTIPLATFORM,
since there is no reason for not doing it now. We can then also remove
the three header files that become obsolete.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is needed in order to keep debug_ll functionality on
cns3xxx working when we enable ARCH_MULTIPLATFORM.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add SATA support to marzen_defconfig.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Some errata for cache had not enabled on current
Armadillo800eva defconfig.
This patch enables these.
Special thanks to Ishiyama-san
Reported-by: Kiyoshi Ishiyama <kiyoshi.ishiyama.wg@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Don't enable REGULATOR_DUMMY, it is only intended for development / testing.
There doesn't seem to be any value in setting it here and doing
so was an error on my part.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The application / library will be stopped by illegal instruction
on current Armaddilo800eva board,
since defconfig doesn't have CONFIG_NEON.
This patch enabled it.
Special thanks to Ishiyama-san
Reported-by: Kiyoshi Ishiyama <kiyoshi.ishiyama.wg@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kiyoshi Ishiyama <kiyoshi.ishiyama.wg@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Because defconfig disabled ARM branch prediction
by CONFIG_CPU_BPREDICT_DISABLE,
Armadillo800eva's Bogomips and Loop were not good performance.
This patch enabled Arm branch prediction.
Special thanks to Ishiyama-san
Reported-by: Kiyoshi Ishiyama <kiyoshi.ishiyama.wg@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kiyoshi Ishiyama <kiyoshi.ishiyama.wg@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The motivation for this change is:
* It is consistent with all other shmobile boards and;
* Allows the kzm9g-reference code to work with CONFIG_SMP
and thus the new defconfig
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
As well as being a generally sane thing to do this
is required for MMCIF to function in conjunction with
"ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva".
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
As well as being a generally sane thing to do this
is required for MMCIF to function in conjunction with
" ARM: shmobile: streamline mackerel SD and MMC devices".
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
We will produce a board-dt file per SoC core type. That will ease code
readability and will prevent from including superfluous code for supporting
machines that will never be compiled together (particularly the ARM9 and C-A5
upcoming SoCs).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[nicolas.ferre@atmel.com: modify commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This allows BCM2835 be included in a kernel build that supports multiple
SoCs at once, which is useful for distro kernels.
This change:
* Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it
into the relevant menu.
* Moves bcm2835's Kconfig into its own directory, as seems typical for
multi-platform conversions.
* Removes bcm2835_soc.h, and moves the content to the files where it was
used; just one usage per define.
* Deletes some headers and Makefile.boot that aren't needed now that we
support multi-platform.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The spear platform is now multiplatform capable in principle,
and everything still builds when enabled. This slightly rearranges
the Kconfig options for spear to enable both single- and multiplatform
support. As a side-effect, even building the single spear kernel
can now enable spear3xx and spear6xx simultaneously, although
not together with spear13xx, because they are a different archicture
version (v7 instead of v5).
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a device tree node to instantiate the dove thermal driver.
Enable the driver and the thermal framework in dove_defconfig.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Kirkwood 88F6282 and 88F6283 have a thermal sensor.
This patch adds a DT node and enables the driver in the kernel config.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This converts the Nomadik to run in multiplatform mode, including
the defconfig change. After this the "uImage" target in the kernel
tree will no longer work, but we do not care about this. Instead
we generate the uImage from the zImage using mkimage or update
the bootloader to accept bootz. Some minor updates to the defconfig
are done as part of this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Make msm_defconfig more focused on DT devices, i.e. MSM8660 and
MSM8960. This will encourage us to focus our efforts on the
devicetree-ification of mach-msm, and help us catch build errors
quicker.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
We should not select drivers from kconfig as they should by default
be optional. Otherwise we'll be chasing broken dependencies forever:
warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MWAVE) selects SERIAL_8250
which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS)
Fix the issue by removing the selects for zoom and add them to
omap2plus_defconfig.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit 09f6ffde2e (USB: EHCI: fix build error by making ChipIdea host a normal
EHCI driver) introduced CONFIG_USB_EHCI_HCD as a dependency for USB_CHIPIDEA_HOST.
Select CONFIG_USB_EHCI_HCD, so that USB host can be functional again.
Cc: <stable@vger.kernel.org> # 3.8
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This series contains changes for the Marvell EBU platforms (mvebu,
orion, kirkwood, dove) that were not part of the first set of pull
requests because of dependencies on the MMC tree, and being submitted
a little late.
Notable changes are:
* More devices get moved out of board files into device tree
descriptions. The remaining devices listed in there have patches
that will get sent for 3.10, after which we can remove a lot of the
board files entirely. We are doing the pinctrl and mmc drivers here,
ethernet and PCI still remain.
* SMP support for mvebu is improved with support for the
local interrupt controller.
* The Guruplug board file gets replaced with a DT description.
Unfortunately, the dependency on the MMC tree turned out to be a much
larger problem than expected, when the MMC maintainer rebased the patches
in his tree that all of the patches in this branch are based on, which
caused merge conflicts between the new and old versions of those patches.
To work around the merge conflicts, this branch rebases all patches
on top of the respective MMC patches that did get merged into 3.9.
The patches are all identical to the versions that were part of
linux-next, but have a new commit date.
Merge conflicts:
* in board-nsa310.c, the gpio.h inclusion was removed prematurely and
put back as a bug fix earlier. With this series it is really not needed
any more.
* The patch to add rtc support was already applied by Andrew Morton,
and conflicts with a second copy that was in this series, which adds
a lot of other devices to arch/arm/boot/dts/armada-370-xp.dtsi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=7l0+
-----END PGP SIGNATURE-----
Merge tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC mvebu platform changes from Olof Johansson:
"This series contains changes for the Marvell EBU platforms (mvebu,
orion, kirkwood, dove) that were not part of the first set of pull
requests because of dependencies on the MMC tree, and being submitted
a little late.
Notable changes are:
- More devices get moved out of board files into device tree
descriptions. The remaining devices listed in there have patches
that will get sent for 3.10, after which we can remove a lot of the
board files entirely. We are doing the pinctrl and mmc drivers
here, ethernet and PCI still remain.
- SMP support for mvebu is improved with support for the local
interrupt controller.
- The Guruplug board file gets replaced with a DT description.
Unfortunately, the dependency on the MMC tree turned out to be a much
larger problem than expected, when the MMC maintainer rebased the
patches in his tree that all of the patches in this branch are based
on, which caused merge conflicts between the new and old versions of
those patches.
To work around the merge conflicts, this branch rebases all patches on
top of the respective MMC patches that did get merged into 3.9. The
patches are all identical to the versions that were part of
linux-next, but have a new commit date."
* tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits)
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
ARM: kirkwood: topkick: init mvsdio via DT
ARM: kirkwood: nsa310: convert to pinctrl
ARM: Kirkwood: topkick: Enable i2c bus.
ARM: kirkwood: topkick: convert to pinctrl
ARM: dove: convert serial DT nodes to clocks property
arm: mvebu: Add SPI flash on Armada 370 DB board
arm: mvebu: Add SPI flash on Armada XP-DB board
arm: mvebu: Add SPI flash on Armada XP-GP board
arm: mvebu: Add support for SPI controller in Armada 370/XP
clocksource: update and move armada-370-xp-timer documentation to timer directory
arm: mvebu: update DT to support local timers
ARM: Dove: convert usb host controller to DT
arm: mvebu: Enable USB controllers on Armada 370/XP boards
arm: mvebu: Add support for USB host controllers in Armada 370/XP
arm: mvebu: add button for OpenBlocks AX3-4
ARM: Kirkwood: Convert NS2 to gpio-poweroff.
ARM: Kirkwood: Convert NSA310 I2C to device tree
ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
ARM: Kirkwood: Convert NSA310 to DT based regulators.
...
Some of the mvebu boards (mainly the development board) come with
plug-in RAM modules. This patch allows to let the bootloaders which
have no support for DTS to give the real amount of memory available on
the board.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Armada XP DB-MV784MP-GP board has an SPI flash device.
These options allow to access that device over MTD.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Now that we have support for local timers, enable it by default
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This refreshes the dove_defconfig, and adds:
PRINTK_TIME
DEVTMPFS
EXT4
They're quite useful, and allows booting a cubox ubuntu rootfs on SD card,
since that by default uses ext4.
The rest of the churn is due to options and defaults moving around, no
functional difference.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The OpenBlocks AX3-4 platform has several LEDs, so it sounds wise to
enable LED support in mvebu_defconfig. We anticipate that more
platforms using Marvell EBU SoCs will have LEDs in the future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Globalscale Mirabox platform, based on the Armada 370 from
Marvell, has a SD8787 Wireless/Bluetooth chip connected on the SDIO
interface. Now that the mvsdio has a Device Tree binding, and the
necessary Device Tree informations have been added at the SoC and
board level, let's enable the btmrvl driver for the Bluetooth part of
the SD8787 chip.
For now, the driver gets probed correctly, detects the device but
apparently fails to push the firmware to the device:
Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
Bluetooth: FW failed to be active in time!
Bluetooth: Downloading firmware failed!
Bluetooth: vendor=0x2df, device=0x911b, class=255, fn=3
Bluetooth: FW failed to be active in time!
Bluetooth: Downloading firmware failed!
This will have to be investigated separately.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Globalscale Mirabox platform, based on the Armada 370 from
Marvell, has a SD8787 Wireless chip connected on the SDIO
interface. Now that the mvsdio has a Device Tree binding, and the
necessary Device Tree informations have been added at the SoC and
board level, let's enable the mwifiex driver for the Wireless part of
the SD8787 chip.
For now, the driver gets probed correctly, detects a device and shows
the network interfaces. However, scanning Wifi networks doesn't work
for now, with a 'CMD_RESP: cmd 0x6 error, result=0x1' message. This
will have to be investigated separately.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Now that the mvsdio driver has gained Device Tree support and the
necessary Device Tree informations has been added for Armada 370 and
Armada XP platforms, we enable the MMC subsystem and the mvsdio driver
in mvebu_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The RTC class driver is already part of the mvebu_defconfig but the
Marvell internal RTC not yet. Now that its support is added for mvebu
let's update the config file.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Merge misc patches from Andrew Morton:
- Florian has vanished so I appear to have become fbdev maintainer
again :(
- Joel and Mark are distracted to welcome to the new OCFS2 maintainer
- The backlight queue
- Small core kernel changes
- lib/ updates
- The rtc queue
- Various random bits
* akpm: (164 commits)
rtc: rtc-davinci: use devm_*() functions
rtc: rtc-max8997: use devm_request_threaded_irq()
rtc: rtc-max8907: use devm_request_threaded_irq()
rtc: rtc-da9052: use devm_request_threaded_irq()
rtc: rtc-wm831x: use devm_request_threaded_irq()
rtc: rtc-tps80031: use devm_request_threaded_irq()
rtc: rtc-lp8788: use devm_request_threaded_irq()
rtc: rtc-coh901331: use devm_clk_get()
rtc: rtc-vt8500: use devm_*() functions
rtc: rtc-tps6586x: use devm_request_threaded_irq()
rtc: rtc-imxdi: use devm_clk_get()
rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
rtc: rtc-pcf8583: use dev_warn() instead of printk()
rtc: rtc-sun4v: use pr_warn() instead of printk()
rtc: rtc-vr41xx: use dev_info() instead of printk()
rtc: rtc-rs5c313: use pr_err() instead of printk()
rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
rtc: rtc-ds2404: use dev_err() instead of printk()
rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
...
These are device tree conversions for a number of platforms,
with the intention of turning code from board files into
device tree descriptions. Notable changes are:
* davinci bindings for pinctrl, MTD, RTC, watchdog and i2c
* nomadik bindings for all devices, removing the board files
* bcm2835 bindings for mmc and i2c
* tegra bindings for hdmi, keyboard, audio, as well as some updates
* at91 bindings for hardware ecc and for devices on RM9200
* mxs bindings for cfa100xx
* sunxi support for Miniand Hackberry board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=NLEa
-----END PGP SIGNATURE-----
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree conversions from Arnd Bergmann:
"These are device tree conversions for a number of platforms, with the
intention of turning code from board files into device tree
descriptions. Notable changes are:
- davinci bindings for pinctrl, MTD, RTC, watchdog and i2c
- nomadik bindings for all devices, removing the board files
- bcm2835 bindings for mmc and i2c
- tegra bindings for hdmi, keyboard, audio, as well as some updates
- at91 bindings for hardware ecc and for devices on RM9200
- mxs bindings for cfa100xx
- sunxi support for Miniand Hackberry board"
* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
clk: tegra: initialise parent of uart clocks
ARM: tegra: remove clock-frequency properties from serial nodes
clk: tegra: fix driver to match DT binding
clk: tegra: local arrays should be static
clk: tegra: Add missing spinlock for hclk and pclk
clk: tegra: Implement locking for super clock
clk: tegra: fix wrong clock index between se to sata_cold
sunxi: a13-olinuxino: Add user LED to the device tree
ARM: davinci: da850 DT: add support for machine reboot
ARM: davinci: da850: add wdt DT node
ARM: davinci: da850: add DT node for I2C0
ARM: at91: at91sam9n12: add DT parameters to enable PMECC
ARM: at91: at91sam9x5: add DT parameters to enable PMECC
ARM: at91: add EMAC bindings to RM9200 DT
ARM: at91: add SSC bindings to RM9200 DT
ARM: at91: add MMC bindings to RM9200 DT
ARM: at91: Animeo IP: enable watchdog support
ARM: nomadik: fix OF compilation regression
...
These updates are all for board specific code, including
* defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra
* SD/MMC and I2C support on bcm2835 (Raspberry PI)
* minor updates for PXA
* shmobile updates to GPIO usage in board files
* More things in OMAP board files are moved over to device tree probing
* Better support for audio devices on some OMAP platforms
Conflicts include the omap board-apollon.c file that is removed without
a replacement, and conflicting context in the 4430sdp board file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=/qBE
-----END PGP SIGNATURE-----
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board specific changes from Arnd Bergmann:
"These updates are all for board specific code, including
- defconfig updates for shmobile, davinci, bcm2835, imx, omap and
tegra
- SD/MMC and I2C support on bcm2835 (Raspberry PI)
- minor updates for PXA
- shmobile updates to GPIO usage in board files
- More things in OMAP board files are moved over to device tree
probing
- Better support for audio devices on some OMAP platforms"
* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
ARM: imx_v4_v5_defconfig: Add VPU support
ARM: imx: configs: enable netfilter support
ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
RX-51: Register twl4030-madc device
RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
ARM: OMAP1: nokia770: enable CBUS/Retu
ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
ARM: OMAP2+: craneboard: support the TPS65910 PMU
ARM: OMAP2+: craneboard: support NAND device
ARM: OMAP3: cm-t3517: add MMC support
ARM: OMAP2+: Remove apollon board support
ARM: shmobile: armadillo800eva: set clock rates before timer init
ARM: tegra: defconfig updates
ARM: shmobile: mackerel: Use gpio_request_one()
ARM: shmobile: kzm9g: Use gpio_request_one()
ARM: shmobile: bonito: Use gpio_request_one()
...
This is a larger set of new functionality for the existing SoC families,
including:
* vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850
* prima2 gains support for the "marco" SoC family, its SMP based cousin
* tegra gains support for the new Tegra4 (Tegra114) family
* socfpga now supports a newer version of the hardware including SMP
* i.mx31 and bcm2835 are now using DT probing for their clocks
* lots of updates for sh-mobile
* OMAP updates for clocks, power management and USB
* i.mx6q and tegra now support cpuidle
* kirkwood now supports PCIe hot plugging
* tegra clock support is updated
* tegra USB PHY probing gets implemented diffently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=PRrg
-----END PGP SIGNATURE-----
Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC-specific updates from Arnd Bergmann:
"This is a larger set of new functionality for the existing SoC
families, including:
- vt8500 gains support for new CPU cores, notably the Cortex-A9 based
wm8850
- prima2 gains support for the "marco" SoC family, its SMP based
cousin
- tegra gains support for the new Tegra4 (Tegra114) family
- socfpga now supports a newer version of the hardware including SMP
- i.mx31 and bcm2835 are now using DT probing for their clocks
- lots of updates for sh-mobile
- OMAP updates for clocks, power management and USB
- i.mx6q and tegra now support cpuidle
- kirkwood now supports PCIe hot plugging
- tegra clock support is updated
- tegra USB PHY probing gets implemented diffently"
* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
ARM: prima2: remove duplicate v7_invalidate_l1
ARM: shmobile: r8a7779: Correct TMU clock support again
ARM: prima2: fix __init section for cpu hotplug
ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
arm: socfpga: Add SMP support for actual socfpga harware
arm: Add v7_invalidate_l1 to cache-v7.S
arm: socfpga: Add entries to enable make dtbs socfpga
arm: socfpga: Add new device tree source for actual socfpga HW
ARM: tegra: sort Kconfig selects for Tegra114
ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
ARM: tegra: Fix build error for gic update
ARM: tegra: remove empty tegra_smp_init_cpus()
ARM: shmobile: Register ARM architected timer
ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
ARM: shmobile: r8a7779: Correct TMU clock support
ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
ARM: mxs: use apbx bus clock to drive the timers on timrotv2
...
Converting more ARM platforms to multiplatform support. This time, OMAP
gets converted, which is a major step since this is by far the largest
platform in terms of code size. The same thing happens to the vt8500
platform.
Conflicts include:
* Two mach/uncompress.h files are removed, the changes made to them
elsewhere can be discarded now.
* Moving the OMAP4 irq_match array has context clashes with turning
omap4_sar_ram_init into an omap_early_initcall()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=nl4h
-----END PGP SIGNATURE-----
Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform support from Arnd Bergmann:
"Converting more ARM platforms to multiplatform support. This time,
OMAP gets converted, which is a major step since this is by far the
largest platform in terms of code size. The same thing happens to the
vt8500 platform."
* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
net: cwdavinci_cpdma: export symbols for cpsw
remoteproc: omap: depend on OMAP_MBOX_FWK
[media] davinci: do not include mach/hardware.h
ARM: OMAP2+: Make sure files with omap initcalls include soc.h
ARM: OMAP2+: Include soc.h to drm.c to fix compiling
ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall
ARM: multi_v7_defconfig: add ARCH_ZYNQ
ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB
arm: vt8500: Remove remaining mach includes
arm: vt8500: Convert debug-macro.S to be multiplatform friendly
arm: vt8500: Remove single platform Kconfig options
ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
ARM: OMAP2+: Add minimal support for booting vexpress
ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
ARM: OMAP2+: Disable code that currently does not work with multiplaform
ARM: OMAP2+: Add multiplatform debug_ll support
ARM: OMAP: Fix dmaengine init for multiplatform
ARM: OMAP: Fix i2c cmdline initcall for multiplatform
ARM: OMAP2+: Use omap initcalls
ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
A large number of cleanups, all over the platforms. This is dominated
largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
others moving code out of arch/arm into more appropriate subsystems.
The clocksource and irqchip drivers are now abstracted to the point
where platforms that are already cleaned up do not need to even specify
the driver they use, it can all get configured from the device tree
as we do for normal device drivers. The clocksource changes basically
touch every single platform in the process.
We further clean up the use of platform specific header files here,
with the goal of turning more of the platforms over to being
"multiplatform" enabled, which implies that they cannot expose
their headers to architecture independent code any more.
It is expected that no functional changes are part of the cleanup.
The overall reduction in total code lines is mostly the result of
removing broken and obsolete code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=DvgJ
-----END PGP SIGNATURE-----
Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"A large number of cleanups, all over the platforms. This is dominated
largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
others moving code out of arch/arm into more appropriate subsystems.
The clocksource and irqchip drivers are now abstracted to the point
where platforms that are already cleaned up do not need to even
specify the driver they use, it can all get configured from the device
tree as we do for normal device drivers. The clocksource changes
basically touch every single platform in the process.
We further clean up the use of platform specific header files here,
with the goal of turning more of the platforms over to being
"multiplatform" enabled, which implies that they cannot expose their
headers to architecture independent code any more.
It is expected that no functional changes are part of the cleanup.
The overall reduction in total code lines is mostly the result of
removing broken and obsolete code."
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
ARM: mvebu: correct gated clock documentation
ARM: kirkwood: add missing include for nsa310
ARM: exynos: move exynos4210-combiner to drivers/irqchip
mfd: db8500-prcmu: update resource passing
drivers/db8500-cpufreq: delete dangling include
ARM: at91: remove NEOCORE 926 board
sunxi: Cleanup the reset code and add meaningful registers defines
ARM: S3C24XX: header mach/regs-mem.h local
ARM: S3C24XX: header mach/regs-power.h local
ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
ARM: S3C24XX: transform s3c2443 subirqs into new structure
ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
ARM: S3C24XX: move s3c2443 irq code to irq.c
ARM: S3C24XX: transform s3c2416 irqs into new structure
ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
ARM: S3C24XX: move s3c2416 irq init to common irq code
ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
ARM: S3C24XX: Move irq syscore-ops to irq-pm
clocksource: always define CLOCKSOURCE_OF_DECLARE
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRAuO3AAoJEHm+PkMAQRiGbfAH/1C3QQKB11aBpYLAw7qijAze
yOui26UCnwRryxsO8zBCQjGoByy5DvY/Q0zyUCWUE6nf/JFSoKGUHzfJ1ATyzGll
3vENP6Fnmq0Hgc4t8/gXtXrZ1k/c43cYA2XEhDnEsJlFNmNj2wCQQj9njTNn2cl1
k6XhZ9U1V2hGYpLL5bmsZiLVI6dIpkCVw8d4GZ8BKxSLUacVKMS7ml2kZqxBTMgt
AF6T2SPagBBxxNq8q87x4b7vyHYchZmk+9tAV8UMs1ecimasLK8vrRAJvkXXaH1t
xgtR0sfIp5raEjoFYswCK+cf5NEusLZDKOEvoABFfEgL4/RKFZ8w7MMsmG8m0rk=
=m68Y
-----END PGP SIGNATURE-----
Merge branch 'omap/multiplatform-fixes', tag 'v3.8-rc5' into next/multiplatform
The omap multiplatform support uncovered a bug in the cwdavinci_cpdma
code and was missing two drivers that are enabled now but are not
quite ready for multiplatform, as found by allyesconfig builds.
There is also a conflict generated by automated merge in
arch/arm/mach-omap2/drm.c between a bug fix that went into v3.8-rc5
and a different version of the same fix that went into the
omap/multiplatform branch. This merge removes the extraneous
#include that was causing build errors.
* omap/multiplatform-fixes:
net: cwdavinci_cpdma: export symbols for cpsw
remoteproc: omap: depend on OMAP_MBOX_FWK
[media] davinci: do not include mach/hardware.h
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are fixes for compiler warnings that for the most
part were introduced during the 3.8 cycle but are otherwise
harmless.
* warning-fixes:
scripts/sortextable: silence script output
ARM: s3c: i2c: add platform_device forward declaration
ARM: mvebu: allow selecting mvebu without Armada XP
ARM: pick Versatile by default for !MMU
ARM: integrator: fix build with INTEGRATOR_AP off
ARM: integrator/versatile: fix NOMMU warnings
ARM: sa1100: don't warn about mach/ide.h
ARM: shmobile: fix defconfig warning on CONFIG_USB
ARM: w90x900: fix legacy assembly syntax
ARM: samsung: fix assembly syntax for new gas
ARM: disable virt_to_bus/virt_to_bus almost everywhere
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A recent update to the marzen_defconfig introduced a
duplicate CONFIG_USB=y line. This removes one of the
two.
arch/arm/configs/marzen_defconfig:86:warning: override: reassigning to symbol USB
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: linux-sh@vger.kernel.org
We are getting a number of warnings about the use of the deprecated
bus_to_virt function in drivers using the ARM ISA DMA API:
drivers/parport/parport_pc.c: In function 'parport_pc_fifo_write_block_dma':
drivers/parport/parport_pc.c:622:3: warning: 'bus_to_virt' is deprecated
(declared at arch/arm/include/asm/memory.h:253) [-Wdeprecated-declarations]
This is only because that function gets used by the inline
set_dma_addr() helper. We know that any driver for the ISA DMA API
is correctly using the DMA addresses, so we can change this
to use the __bus_to_virt() function instead, which does not warn.
After this, there are no remaining drivers that are used on
any defconfigs on ARM using virt_to_bus or bus_to_virt, with
the exception of the OSS sound driver. That driver is only used
on RiscPC, NetWinder and Shark, so we can set ARCH_NO_VIRT_TO_BUS
on all other platforms and hide the deprecated functions, which
is far more effective than marking them as deprecated, in order
to avoid any new users of that code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
- enable VPU support in imx_v4_v5_defconfig to get compile coverage
- enable netfilter support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=wKfb
-----END PGP SIGNATURE-----
Merge tag 'arm-imx-defconfig' of git://git.pengutronix.de/git/imx/linux-2.6 into next/boards
ARM i.MX defconfig updates for v3.9
- enable VPU support in imx_v4_v5_defconfig to get compile coverage
- enable netfilter support
* tag 'arm-imx-defconfig' of git://git.pengutronix.de/git/imx/linux-2.6:
ARM: imx_v4_v5_defconfig: Add VPU support
ARM: imx: configs: enable netfilter support
Signed-off-by: Olof Johansson <olof@lixom.net>
Let the VPU driver be built by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Netfilter packet filtering framework is useful for so many
use cases that most people will build kernels with it enabled.
So, it would probably make sense to have it enabled by default.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- A couple of optimization on timer
- Some updates on mxs_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJREJ4lAAoJEFBXWFqHsHzO5bwIAJkZC1IZ+GEh3n9ogbl/JwfE
B0k7xsTrx7TgsXvdX1oxrivu75rxWfhwVgZdp9dO3zEnyeOjFRitnlyfaliKx1JM
8ZHHsVP/VxOTvw5HarirmFejyWr9x+xx1H2p9swDHT+kccUA6aazEykEx4HFAADg
9c7Z3QWVLugwo950ayMgWk6QeRJb6pZj02OlszMiW4t/qphDhoF4qiqR9QiVL1aP
Td655hZzuoCuHrjyrRxUTgTwp70ntzxvwEDCaEqwGhmzN7tqJbi/wXTCcTg8A11A
2u3P8UvqeYKbATeqMP8vl/Ne6E1kAy8sGVTsAFoaooUUtZoN2YMdsIIXiw+JKy4=
=Veye
-----END PGP SIGNATURE-----
Merge tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
mxs soc changes for 3.9
- A couple of optimization on timer
- Some updates on mxs_defconfig
* tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
ARM: mxs: use apbx bus clock to drive the timers on timrotv2
ARM: mxs: Update mxs_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRFRkcAAoJEAf03oE53VmQ71EH/08SOBM+kgQjKCzFe9ekuytz
DlnUzFWOQlSibjWOL7ruWoLPiTurJHQNiKEpePw7g3dh8ars7fJLlVIr0yRehHBs
pJpxzH7/ZqHqzi+4YXCrn5XAVK9ej7HKFo9zoDD1GMctsOD2FoNDIzOIh47s3z4Y
G92kvGFG5z8EACvcob/+q53RcVjimugcrKRhz61MhKdpiIGGzz/+wl45StyM8RYc
mLFb7yGa1j9Zdstm/45a+3XwMUEbxsbi0NGeA9E9kL3XZZERWkfcDL4MiV3F0l6Q
oJqVQ6/QzGyqnTolr+2FAVkaXDP4geo6S42N97pGIjtIco2gaQ5kbMPoyei98N0=
=SVnr
-----END PGP SIGNATURE-----
Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup
From Nicolas Ferre:
Little AT91 cleanup: only remove one deprecated board.
* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
ARM: at91: remove NEOCORE 926 board
Signed-off-by: Olof Johansson <olof@lixom.net>
Modify/remove conflict in arch/arm/mach-at91/board-neocore926.c
The board is not available anymore and it seems its use
is very limited.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
- Sort out imx DEBUG_LL uart port selection
- A couple of imx_v6_v7_defconfig updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJREHAwAAoJEFBXWFqHsHzOONMIAK/w88b7mCNmwOgV+nEDZGfm
17rVGXZV4YdR4bpOFBdbMMddf16Yb5ENH5AHDwlYzr8zzZE0ODOjrQ5Pmk1aA9VR
EsJVIKpS9FnU6tvUIEnYPTK+PDkf44IW/bDb9BdbptVQmnWP/hTtYDcx7ruTSZx4
OK/Z9oz3Hwwl8+AfWh67tZ/nqJg7eugGwctM6IxMOH7dUCuJ5DALF9dYn3NCqC6b
oqkzbNpSdg2MicUINiMOEbQvoZfGgpC6CH/nWCSIjNWss0bbakpF5iqk0aU7+/0k
tNtbKFIAKgcHF4t0P0RyI6Qyt03tPBF2tUobuCEtwdBDT3jWFrkpUpImFLyE5+I=
=0R2N
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
imx soc changes for 3.9
- Sort out imx DEBUG_LL uart port selection
- A couple of imx_v6_v7_defconfig updates
* tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs
ARM: imx: use separated debug uart symbol for imx31 and imx35
ARM: imx_v6_v7_defconfig: Select IPUV3 driver
things to device tree based booting.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRD/37AAoJEBvUPslcq6VzcDIP/j8Zk38HBMQF5KHDxg3oFfA4
Zcq/Aw02Jj1p48DINTyu56uHuztXHFL8/AA3uhj5Ie+XQlOzGTHPFaUA4Yo0xsxK
1Vi2NmKN72ANXNYWjY4bLFcLhKtuqn7LNoyylzb7Hy1emjjXLRW/CdUMi2jLn/Hm
qAbl5GNc5tQE+h+O0xyOyI/4F7WQYnoFGzXUDj1nDZp3HV1SoWmU1WGWcG2w8VkU
S4yyz3P6HP7iZrPS2J7LTOo1+r3hQJtHQJ1Svmpl+K80eNTzdAaqZknS1F6jvYn5
OvNrnK6quA/dmOB1mmT1KhLjqHJgFv0ZTvtLUfV3lhvJL6W0ZIRII1OAEl33WXUT
Fzt70ocus6dcWqMGIO+raEGuo8y+KWQA+qZ7otJoTPtIk5Ldv3mJZBqHEorNTVuH
6Wxy1WKaLuzO+0bmaTj8tiCNkBdp4jED1c1EVhEJemDJSxeCdIw/c6GIzKXc4tBb
TLFOOxacfTfvdGYlJNjo/nBTCmKraaHky+/W8IgyOAyvX7vmIumpXJmO73zsErVw
3FPM9zIgJ2pq3q50gAXMQWDgef2nnpyhJD8F5vL3eZjxdobNQ+1p49lVsPyqVSGQ
kZ8f+vTRGlAmRsLmzVMxqED5fxoiTHjFI80mLQkeIOe7WHGoTONISVcrx8oSHr2t
M6NoErnvxEuH/83hA7s1
=mdSV
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
From Tony Lindgren:
Minimal updates to OMAP board-*.c files while converting
things to device tree based booting.
* tag 'omap-for-v3.9/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
RX-51: Register twl4030-madc device
RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
ARM: OMAP1: nokia770: enable CBUS/Retu
ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
ARM: OMAP2+: craneboard: support the TPS65910 PMU
ARM: OMAP2+: craneboard: support NAND device
ARM: OMAP3: cm-t3517: add MMC support
ARM: OMAP2+: Remove apollon board support
+ Linux 3.8-rc6
Signed-off-by: Olof Johansson <olof@lixom.net>
Various new features are enabled on Tegra:
* RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony
and Ventana.
* POWER_RESET_GPIO to provide a power off driver for TrimSlice.
* Tegra KBC controller support, for Seaboard, Harmony, and Whistler.
* Tegra high-speed UART driver, for Cardhu Bluetooth.
* kexec support.
This pull request is based on v3.8-rc3.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=W9Vp
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.9-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/boards
From Stephen Warren:
ARM: tegra: defconfig update
Various new features are enabled on Tegra:
* RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony
and Ventana.
* POWER_RESET_GPIO to provide a power off driver for TrimSlice.
* Tegra KBC controller support, for Seaboard, Harmony, and Whistler.
* Tegra high-speed UART driver, for Cardhu Bluetooth.
* kexec support.
This pull request is based on v3.8-rc3.
* tag 'tegra-for-3.9-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: defconfig updates
- use rtc-mv in mvebu armv7 SoCs
- add pci-e hotplug for kirkwood
Depends on:
- tags/mvebu_fixes_for_v3.8-rc6
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRCqOnAAoJEAi3KVZQDZAewlUH/04tpMdf2rvgNP8uUVPVx62T
cXMga9qLTyXQ9hn31KP7fd/JPLRJFsG/+jy4x687EurJGIXXaWGNadjlE69DEPAZ
jt78sPa+Mo/xYD4XoNCr/ng1cbnTwc1ebSRSfN+nIjWynE8Do7tkOKxfJodTgQCM
XbE3EHfvAktKfJTsFDPsFwoIycEYxFsN4jQPwiCdPHVb24py3FWBy+qep7wtLfSO
gTnakEcOsQc7aFzrFdZ1ZnQ9KRlBYXVN636o4sQkM+UM9Vf7FAWBM4OCi2KP4trU
IlTzknoMAMYat+AtYzq1FcDmajeP/EgG6DbQh7lqUK0LEILn2rdAUlgN2QB3VIs=
=6oef
-----END PGP SIGNATURE-----
Merge tag 'drivers_for_v3.9' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper:
mvebu drivers for v3.9
- use rtc-mv in mvebu armv7 SoCs
- add pci-e hotplug for kirkwood
Depends on:
- tags/mvebu_fixes_for_v3.8-rc6
* tag 'drivers_for_v3.9' of git://git.infradead.org/users/jcooper/linux:
cpuidle: kirkwood: Move out of mach directory
rtc: Add support of rtc-mv for MVEBU SoCs
ARM: Kirkwood: Support basic hotplug for PCI-E
arm: mvebu: i2c come back in defconfig
arm: plat-orion: fix printing of "MPP config unavailable on this hardware"
Dove: activate GPIO interrupts in DT
- It's based on imx-cleanup-3.9 to avoid conflicts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRCRzjAAoJEFBXWFqHsHzOOTYH/2YiAhCXDoovJ++leTTBKoFO
kRx2gvV0oxQYAjvRX4IiiwcuWjbCQI8ugiKxeH9Vn+jwHD8jKqzTINEUVQfKUud6
s8AI1/EqKwKnEFYFs/Fg6WxZHuHpoL/clpRB/5wZw1KoChmte2OnVU7d9vOt67iN
l0P4nPR18iwU5LFoDCnqMX50Dp9C56KEF2JhzBCQKW9TtRclwpcBNy6AsHb/TNOe
/nHN+Ku6/3xQEz2MPQ9QdmgFxnp9Pr8R6leJNg1Vg6UGRYrKxy0zVo+oFEXAZuUw
v6gnhdlvO6Ki/IKHcWkw7Q7pUDTuB6SttirQE9mBlPdc0V3kTU82SVtX9WAQhSs=
=rVol
-----END PGP SIGNATURE-----
Merge tag 'imx6q-cpudile-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
imx6q cpuidle support for 3.9
- It's based on imx-cleanup-3.9 to avoid conflicts.
* tag 'imx6q-cpudile-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx6q: support WAIT mode using cpuidle
ARM: imx: move imx6q_cpuidle_driver into a separate file
ARM: imx: mask gpc interrupts initially
ARM: imx: return zero in case next event gets a large increment
ARM: imx: Remove mx508 support
ARM: imx: Remove mach-mx51_3ds board
ARM: imx: use debug_ll_io_init() for imx6q
ARM: imx: remove unused imx6q_clock_map_io()
ARM: mach-imx: Kconfig: Do not select Babbage for MACH_IMX51_DT
Signed-off-by: Olof Johansson <olof@lixom.net>
Still, two delete/change conflicts caused by imx/cleanup:
arch/arm/mach-imx/mach-mx50_rdp.c
arch/arm/mach-imx/mach-mx51_3ds.c
Newer versions of udev (such as 182) requires CONFIG_DEVTMPFS_MOUNT to be
selected, otherwise we get a stuck console:
Starting udev
Starting Bootlog daemon: bootlogd: cannot deduce real console device
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Regenerate the mxs_defconfig to match recent kernel using the following
commands:
make mxs_defconfig
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig
Then enable these features:
- MTD block access
- UBI and UBIFS
- JFFS2
- EXT2 and EXT4
- AT24 EEPROM support
- Support for most of the SPI flashes
- Support for ethernet PHYs that are usually used on mxs designs
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
in question and other dts related changes, and will have them go via DT
branch to save the cross branch dependency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRB24TAAoJEFBXWFqHsHzO3RcH/22Qe0+BUjxj1NBrBjBee6YE
ymb2CIOaTM2PgAQJZDgqGa4zgbPK7bcLu6fSyyg+XzExaxZ/CQI0EuKjMSroiyoB
6tRB76dz9ESWO4QYrQH65QxdY5Bi3VYDXv9+NeOdl0lzHR1wJp/Eeqvx608+aKIa
ps5Db1OdJn5TZ1o8Ye+/m4BUFBp+6feTx3fFfgXdes61eZskJLokURQz9zA6qiDw
s6YCBt1lNSNG/duZD3uFichDSPi/h+YFWwinI+deakRUDNUIs4n8ofToc99N6zWd
iKTbWX1cWOJpAYHKHS2lCaKF0saIpqCt7jhz/wmyXwDCrSSWsmwQSpxc5xmhFXU=
=LfVI
-----END PGP SIGNATURE-----
Merge tag 'imx-cleanup-3.9' into imx/soc
The BeagleBone dev kit uses the built-in RTC module, so
it would be nice to have this built by default in the
omap2plus defconfig.
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
