This is the final round of mostly small fixes and performance
improvements to our initial submit. The main regression fix is the
ia64 simscsi build failure which was missed in the serial number
elimination conversion.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIxBayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisherpAP4rxLpX
bcUnQnEsvoxys/JyoK08Qfv1JebZo1B2MAZ62wD/VZ7LpOuzVLhsM2KhLFGRrs1/
7D2K4tgtO2dQsFix7H0=
=pcHl
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is the final round of mostly small fixes and performance
improvements to our initial submit.
The main regression fix is the ia64 simscsi build failure which was
missed in the serial number elimination conversion"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: ia64: simscsi: use request tag instead of serial_number
scsi: aacraid: Fix performance issue on logical drives
scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()
scsi: libiscsi: Hold back_lock when calling iscsi_complete_task
scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink
scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port
scsi: hisi_sas: Set PHY linkrate when disconnected
scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw
scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO
scsi: hisi_sas: Change return variable type in phy_up_v3_hw()
scsi: qla2xxx: check for kstrtol() failure
scsi: lpfc: fix 32-bit format string warning
scsi: lpfc: fix unused variable warning
scsi: target: tcmu: Switch to bitmap_zalloc()
scsi: libiscsi: fall back to sendmsg for slab pages
scsi: qla2xxx: avoid printf format warning
scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset
scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check
scsi: ufs: hisi: fix ufs_hba_variant_ops passing
scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show
...
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides
that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
genlmsg_multicast_allns now returns the correct statuses when a message is
sent to a listener. However in the case of adding a device we want to wait
for the listener otherwise we may miss the the device during startup.
Signed-off-by: Cathy Avery <cavery@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes: a94a2572b9 ("scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mike Christie <mchristi@redhat.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently there is one cmd timeout timer and one qfull timer for each udev,
and whenever any new command is coming in we will update the cmd timer or
qfull timer. For some corner cases the timers are always working only for
the ringbuffer's and full queue's newest cmd. That's to say the timer won't
be fired even if one cmd has been stuck for a very long time and the
deadline is reached.
This fix will keep the cmd/qfull timers to be pended for the oldest cmd in
ringbuffer and full queue, and will update them with the next cmd's
deadline only when the old cmd's deadline is reached or removed from the
ringbuffer and full queue.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does not change any functionality but avoids that sparse
complains about the queue_cmd_ring() function and its callers.
Fixes: 6fd0ce7972 ("tcmu: prep queue_cmd_ring to be used by unmap wq")
Reviewed-by: David Disseldorp <ddiss@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the
continuing absence of Nic we have target updates for tcmu and target
core (all with reviews and acks). The biggest observable change is
going to be that we're (again) trying to switch to mulitqueue as the
default (a user can still override the setting on the kernel command
line). Other major core stuff is the removal of the remaining
Microchannel drivers, an update of the internal timers and some
reworks of completion and result handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
o/JckEZZpIp+5NySZNc=
=ggLB
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr.
In addition, with the continuing absence of Nic we have target updates
for tcmu and target core (all with reviews and acks).
The biggest observable change is going to be that we're (again) trying
to switch to mulitqueue as the default (a user can still override the
setting on the kernel command line).
Other major core stuff is the removal of the remaining Microchannel
drivers, an update of the internal timers and some reworks of
completion and result handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
scsi: ufs: remove unnecessary query(DM) UPIU trace
scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
scsi: aacraid: Spelling fix in comment
scsi: mpt3sas: Fix calltrace observed while running IO & reset
scsi: aic94xx: fix an error code in aic94xx_init()
scsi: st: remove redundant pointer STbuffer
scsi: qla2xxx: Update driver version to 10.00.00.08-k
scsi: qla2xxx: Migrate NVME N2N handling into state machine
scsi: qla2xxx: Save frame payload size from ICB
scsi: qla2xxx: Fix stalled relogin
scsi: qla2xxx: Fix race between switch cmd completion and timeout
scsi: qla2xxx: Fix Management Server NPort handle reservation logic
scsi: qla2xxx: Flush mailbox commands on chip reset
scsi: qla2xxx: Fix unintended Logout
scsi: qla2xxx: Fix session state stuck in Get Port DB
scsi: qla2xxx: Fix redundant fc_rport registration
scsi: qla2xxx: Silent erroneous message
scsi: qla2xxx: Prevent sysfs access when chip is down
scsi: qla2xxx: Add longer window for chip reset
...
We use unsigned long, size_t and u64 for dev_size. This has us standardize
on u64.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of doing strdup and kstrto* just use match_int for dev params.
It will be ok to use int instead of unsigned long in tcmu_set_dev_attrib
because that is only being used for max sectors and block size and the
supported values for them are well under the max possible integer value.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch prevents a bug where data_bitmap is allocated in
tcmu_configure_device, userspace changes the max_blocks setting, the device
is mapped to a LUN, then we try to access the data_bitmap based on the new
max_blocks limit which may now be out of range.
To prevent this, we just check if data_bitmap has been setup. If it has
then we fail the max_blocks update operation.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The tcmu dev is added to the list of tcmu devices during configuration. At
this time the tcmu setup has completed, but lio core has not completed its
setup. The device is not yet usable so do not try to unmap blocks from it
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not allow userspace to block or reset the ring until the device has been
configured. This will prevent the bug where userspace can write to those
files and access mb_addr before it has been setup.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the lio core helper to check if the device is configured.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use INIT_LIST_HEAD to initialize node list head.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The caller of queue_cmd_ring grabs and releases the lock, so the
tcmu_setup_cmd_timer failure handling inside queue_cmd_ring should not call
mutex_unlock.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix warning:
smatch warnings:
drivers/target/target_core_user.c:301 tcmu_genl_cmd_done() warn: KERN_*
level not at start of string
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch based on Xiubo's patches adds 2 tcmu attr to block and reset the
netlink interface. It's used during userspace daemon reinitialization after
the daemon has crashed while there is outstanding nl requests. The daemon
can block the nl interface, kill outstanding requests in the kernel and
then reopen the netlink socket and unblock it to allow new requests.
[mkp: typo]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some misc cleanup of the nl rework patches.
1. Fix space instead of tabs use and extra newline
2. Drop initializing variables to 0 when not needed
3. Just pass the skb_buff and msg_header pointers to
tcmu_netlink_event_send.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just return EBUSY if a nl request comes in while processing one. The upper
layers do not support sending multiple create/remove requests at the same
time (you cannot have a create and remove at the same time or do multiple
creates or removes at the same time) and doing a reconfig while a
create/remove is still executing does not make sense.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The next patch is going to fix the hung nl command issue so this adds a
list of outstanding nl commands that we can later abort when the daemon is
restarted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When this code changed, this was never cleaned up.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the TCMU_RING_SIZE macro is not using here will discard it and at the
same time clean up the code style.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Generally target core and TCMUser seem to work fine for tape devices and
media changers. But there is at least one situation where TCMUser is not
able to support sequential access device emulation correctly.
The situation is when an initiator sends a SCSI READ CDB with a length that
is greater than the length of the tape block to read. We can distinguish
two subcases:
A) The initiator sent the READ CDB with the SILI bit being set.
In this case the sequential access device has to transfer the data from
the tape block (only the length of the tape block) and transmit a good
status. The current interface between TCMUser and the userspace does
not support reduction of the read data size by the userspace program.
The patch below fixes this subcase by allowing the userspace program to
specify a reduced data size in read direction.
B) The initiator sent the READ CDB with the SILI bit not being set.
In this case the sequential access device has to transfer the data from
the tape block as in A), but additionally has to transmit CHECK
CONDITION with the ILI bit set and NO SENSE in the sensebytes. The
information field in the sensebytes must contain the residual count.
With the below patch a user space program can specify the real read data
length and appropriate sensebytes. TCMUser then uses the se_cmd flag
SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data
size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is
introduced by Lee Duncan's patch "[PATCH v4] target: transport should
handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700.
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also
taking target updates which are mostly minor except for the tcmu
refactor. The only real core change to worry about is the removal of
high page bouncing (in sas, storvsc and iscsi). This has been well
tested and no problems have shown up so far.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWx1pbCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUucAP42pccS
ziKyiOizuxv9fZ4Q+nXd1A9zhI5tqqpkHjcQegEA40qiZSi3EKGKR8W0UpX7Ntmo
tqrZJGojx9lnrAM2RbQ=
=NMXg
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx.
In the absence of Nic, we're also taking target updates which are
mostly minor except for the tcmu refactor.
The only real core change to worry about is the removal of high page
bouncing (in sas, storvsc and iscsi). This has been well tested and no
problems have shown up so far"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
scsi: lpfc: update driver version to 12.0.0.4
scsi: lpfc: Fix port initialization failure.
scsi: lpfc: Fix 16gb hbas failing cq create.
scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
scsi: lpfc: correct oversubscription of nvme io requests for an adapter
scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
scsi: hisi_sas: Mark PHY as in reset for nexus reset
scsi: hisi_sas: Fix return value when get_free_slot() failed
scsi: hisi_sas: Terminate STP reject quickly for v2 hw
scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
scsi: hisi_sas: Try wait commands before before controller reset
scsi: hisi_sas: Init disks after controller reset
scsi: hisi_sas: Create a scsi_host_template per HW module
scsi: hisi_sas: Reset disks when discovered
scsi: hisi_sas: Add LED feature for v3 hw
scsi: hisi_sas: Change common allocation mode of device id
scsi: hisi_sas: change slot index allocation mode
scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
...
Problem:
$ cat /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out
-1
$ echo "-1" > /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out
-bash: echo: write error: Invalid argument
Fix:
This patch will help reset qfull_time_out to its default
i.e. qfull_time_out=-1.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_WRITECACHE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
emulate_write_cache in configFS.
Removed tcmu_netlink_event() since we have new netlink
events helpers now.
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_DEV_SIZE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
dev_size in configFS.
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_DEV_CFG(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
dev_config in configFS.
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event TCMU_CMD_REMOVED_DEVICE
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event TCMU_CMD_ADDED_DEVICE
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add new netlink events helpers tcmu_netlink_event_init() and
tcmu_netlink_event_send(). These new functions intend to replace
existing netlink events helper function tcmu_netlink_event().
The existing function tcmu_netlink_event() works well for events like
TCMU_ADDED_DEVICE and TCMU_REMOVED_DEVICE which only has one netlink
attribute. But if there is a command requires more than one attributes
to send out, we have to use a struct to adapt the paremeter
reconfig_data, it is hard to use one struct or a union in one struct to
adapt every command with different attributes, it may get long and ugly.
With the new two functions, we can call tcmu_netlink_event_init() to
initialize a netlink event, then add all attributes we need by using
nla_put_xxx(), at last use tcmu_netlink_event_send() to send it out. So
that we don't need to use a long struct or union if we want to send
mulitple attributes for different commands.
[mkp: typos]
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make documentation on target-supported userspace-I/O design be
usable by kernel-doc by using "DOC:". This is used in the driver-api
Documentation chapter.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The trailing semicolon is an empty statement that does no operation.
It is completely stripped out by the compiler. Removing it since it doesn't do
anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If we are failing the command due to a qfull timeout we are
also freeing the tcmu command, so we cannot access it later
to get the se_cmd.
Note: The clearing of cmd->se_cmd is not needed. We do not check
it later for something like determining if the command was failed
due to a timeout. As a result I am dropping it.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch adds 2 tcmu attrs to block/unblock a device and
reset the ring buffer. They are used when the userspace
daemon has crashed or forced to shutdown while IO is executing.
On restart, the daemon can block the device so new IO is not
sent to userspace while it puts the ring in a clean state.
Notes: The reset ring opreation is specific to tcmu, but the
block one could be generic. I kept it tcmu specific, because
it requires some extra locking/state checks in the main IO
path and since other backend modules did not need this
functionality I thought only tcmu should take the perf hit.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Fix to return error code -ENOMEM from the kzalloc() error handling
case instead of 0, as done elsewhere in this function.
Fixes: 80eb876 ("tcmu: allow max block and global max blocks to be settable")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Log cmd id that was not found in the tcmu_handle_completions
lookup failure path.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We will always have a page mapped for cmd data if it is
valid command. If the mapping does not exist then something
bad happened in userspace and it should not proceed. This
has us return VM_FAULT_SIGBUS when this happens instead of
returning a freshly allocated paged. The latter can cause
corruption because userspace might write the pages data
overwriting valid data or return it to the initiator.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Users might have a physical system to a target so they could
have a lot more than 2 gigs of memory they want to devote to
tcmu. OTOH, we could be running in a vm and so a 2 gig
global and 1 gig per dev limit might be too high. This patch
allows the user to specify the limits.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This adds a timer, qfull_time_out, that controls how long a
device will wait for ring buffer space to open before
failing the commands in the queue. It is useful to separate
this timer from the cmd_time_out and default 30 sec one,
because for HA setups cmd_time_out may be disbled and 30
seconds is too long to wait when some OSs like ESX will
timeout commands after as little as 8 - 15 seconds.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch has tcmu internally queue cmds if its ring buffer
is full. It also makes the TCMU_GLOBAL_MAX_BLOCKS limit a
hint instead of a hard limit, so we do not have to add any
new locks/atomics in the main IO path except when IO is not
running.
This fixes the following bugs:
1. We cannot sleep from the submitting context because it might be
called from a target recv context. This results in transport level
commands timing out. For example if the ring is full, we would
sleep, and a iscsi initiator would send a iscsi ping/nop which
times out because the target's recv thread is sleeping here.
2. Devices were not fairly scheduled to run when they hit the global
limit so they could time out waiting for ring space while others
got run.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We do not really save a lot by trying to increase thresh
a multiple of the existing value. This just simplifies the
code by increasing it to whatever is needed for the command
being executed.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In the next patches we will call queue_cmd_ring from the submitting
context and also the completion path. This changes the queue_cmd_ring
return code so in the next patches we can return a sense_reason_t
and also signal if a command was requeued.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Add some comments to make the scatter code to be more readable,
and drop unused arg to new_iov.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The blocks_left calculation does not account for free blocks
between 0 and thresh, so we could be queueing/waiting when
there are enough blocks free.
This has us add in the blocks between 0 and thresh as well as
at the end from thresh to DATA_BLOCK_BITS.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
scatter_data_area always returns 0, so stop checking
for errors.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If we cannot setup a cmd because we run out of ring space
or global pages release the blocks before sleeping. This
prevents a deadlock where dev0 has waiting_blocks set and
needs N blocks, but dev1 to devX have each allocated N / X blocks
and also hit the global block limit so they went to sleep.
find_free_blocks is not able to take the sleeping dev's
blocks becaause their waiting_blocks is set and even
if it was not the block returned by find_last_bit could equal
dbi_max. The latter will probably never happen because
DATA_BLOCK_BITS is so high but in the next patches
DATA_BLOCK_BITS and TCMU_GLOBAL_MAX_BLOCKS will be settable so
it might be lower and could happen.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
No need for the commands_lock. The cmdr_lock is already held during
idr addition and deletion, so just grab it during traversal.
Note: This also fixes a issue where we should have been using at
least _bh locking in tcmu_handle_completions when taking the commands
lock to prevent the case where tcmu_handle_completions could be
interrupted by a timer softirq while the commands_lock is held.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
