On powerpc, we would like to be able to make a pass on vmlinux.o and
generate a new object file to be linked into vmlinux. Add a generic pass
in Makefile.vmlinux that architectures can use for this purpose.
Architectures need to select CONFIG_ARCH_WANTS_PRE_LINK_VMLINUX and must
provide arch/<arch>/tools/Makefile with .arch.vmlinux.o target, which
will be invoked prior to the final vmlinux link step.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-12-hbathini@linux.ibm.com
Function tracer on powerpc can only work with vmlinux having a .text
size of up to ~64MB due to powerpc branch instruction having a limited
relative branch range of 32MB. Today, this is only detected on kernel
boot when ftrace is init'ed. Add a post-link script to check the size of
.text so that we can detect this at build time, and break the build if
necessary.
We add a dependency on !COMPILE_TEST for CONFIG_HAVE_FUNCTION_TRACER so
that allyesconfig and other test builds can continue to work without
enabling ftrace.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-11-hbathini@linux.ibm.com
Commit 61688a82e0 ("powerpc/bpf: enable kfunc call") enhanced
bpf_jit_emit_func_call_hlp() to handle calls out to module region, where
bpf progs are generated. The only difference now between
bpf_jit_emit_func_call_hlp() and bpf_jit_emit_func_call_rel() is in
handling of the initial pass where target function address is not known.
Fold that logic into bpf_jit_emit_func_call_hlp() and rename it to
bpf_jit_emit_func_call_rel() to simplify bpf function call JIT code.
We don't actually need to load/restore TOC across a call out to a
different kernel helper or to a different bpf program since they all
work with the kernel TOC. We only need to do it if we have to call out
to a module function. So, guard TOC load/restore with appropriate
conditions.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-10-hbathini@linux.ibm.com
Move the ftrace stub used to cover inittext before _einittext so that it
is within kernel text, as seen through core_kernel_text(). This is
required for a subsequent change to ftrace.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-9-hbathini@linux.ibm.com
To simplify upcoming changes to ftrace, add a check to skip actual
instruction patching if the old and new instructions are the same. We
still validate that the instruction is what we expect, but don't
actually patch the same instruction again.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-8-hbathini@linux.ibm.com
Pointer to struct module is only relevant for ftrace records belonging
to kernel modules. Having this field in dyn_arch_ftrace wastes memory
for all ftrace records belonging to the kernel. Remove the same in
favour of looking up the module from the ftrace record address, similar
to other architectures.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-7-hbathini@linux.ibm.com
On 32-bit powerpc, gcc generates a three instruction sequence for
function profiling:
mflr r0
stw r0, 4(r1)
bl _mcount
On kernel boot, the call to _mcount() is nop-ed out, to be patched back
in when ftrace is actually enabled. The 'stw' instruction therefore is
not necessary unless ftrace is enabled. Nop it out during ftrace init.
When ftrace is enabled, we want the 'stw' so that stack unwinding works
properly. Perform the same within the ftrace handler, similar to 64-bit
powerpc.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-5-hbathini@linux.ibm.com
Gcc v5.x emits a 3-instruction sequence for -mprofile-kernel:
mflr r0
std r0, 16(r1)
bl _mcount
Gcc v6.x moved to a simpler 2-instruction sequence by removing the 'std'
instruction. The store saved the return address in the LR save area in
the caller stack frame for stack unwinding. However, with dynamic
ftrace, we no longer have a call to _mcount on kernel boot when ftrace
is not enabled. When ftrace is enabled, that store is performed within
ftrace_caller(). As such, the additional 'std' instruction is redundant.
Nop it out on kernel boot.
With this change, we now use the same 2-instruction profiling sequence
with both -mprofile-kernel, as well as -fpatchable-function-entry on
64-bit powerpc.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-4-hbathini@linux.ibm.com
Rather than hard-coding the offset into a function to be used to
determine if a kprobe is at function entry, use ftrace_location() to
determine the ftrace location within the function and categorize all
instructions till that offset to be function entry.
For functions that cannot be traced, we fall back to using a fixed
offset of 8 (two instructions) to categorize a probe as being at
function entry for 64-bit elfv2, unless we are using pcrel.
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-3-hbathini@linux.ibm.com
So far, we have relied on the fact that gcc supports both
-mprofile-kernel, as well as -fpatchable-function-entry, and clang
supports neither. Our Makefile only checks for CONFIG_MPROFILE_KERNEL to
decide which files to build. Clang has a feature request out [*] to
implement -fpatchable-function-entry, and is unlikely to support
-mprofile-kernel.
Update our Makefile checks so that we pick up the correct files to build
once clang picks up support for -fpatchable-function-entry.
[*] https://github.com/llvm/llvm-project/issues/57031
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-2-hbathini@linux.ibm.com
Drop the include of dma-mapping.h in machdep.h, replace it with forward
declarations of struct device and struct pci_dev, and include time64.h
and page.h which are required for time64_t and pgprot_t respectively.
Add direct includes of some other headers to some files that were
getting them via machdep.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241009051826.132805-2-mpe@ellerman.id.au
Drop the include of seq_file.h in machdep.h, replace it with a forward
declaration of struct seq_file, which is all that's required.
Add direct includes of seq_file.h to some files that were getting
seq_file.h via machdep.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241009051826.132805-1-mpe@ellerman.id.au
After fixing the HAVE_STACKPROTECTER checks for clang's in-progress
per-task stack protector support [1], the build fails during prepare0
because '-mstack-protector-guard-offset' has not been added to
KBUILD_CFLAGS yet but the other '-mstack-protector-guard' flags have.
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
make[4]: *** [scripts/Makefile.build:229: scripts/mod/empty.o] Error 1
make[4]: *** [scripts/Makefile.build:102: scripts/mod/devicetable-offsets.s] Error 1
Mirror other architectures and add all '-mstack-protector-guard' flags
to KBUILD_CFLAGS atomically during stack_protector_prepare, which
resolves the issue and allows clang's implementation to fully work with
the kernel.
Cc: stable@vger.kernel.org # 6.1+
Link: https://github.com/llvm/llvm-project/pull/110928 [1]
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241009-powerpc-fix-stackprotector-test-clang-v2-2-12fb86b31857@kernel.org
Clang's in-progress per-task stack protector support [1] does not work
with the current Kconfig checks because '-mstack-protector-guard-offset'
is not provided, unlike all other architecture Kconfig checks.
$ fd Kconfig -x rg -l mstack-protector-guard-offset
./arch/arm/Kconfig
./arch/riscv/Kconfig
./arch/arm64/Kconfig
This produces an error from clang, which is interpreted as the flags not
being supported at all when they really are.
$ clang --target=powerpc64-linux-gnu \
-mstack-protector-guard=tls \
-mstack-protector-guard-reg=r13 \
-c -o /dev/null -x c /dev/null
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
This argument will always be provided by the build system, so mirror
other architectures and use '-mstack-protector-guard-offset=0' for
testing support, which fixes the issue for clang and does not regress
support with GCC.
Even with the first problem addressed, the 32-bit test continues to fail
because Kbuild uses the powerpc64le-linux-gnu target for clang and
nothing flips the target to 32-bit, resulting in an error about an
invalid register valid:
$ clang --target=powerpc64le-linux-gnu \
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r2 \
-mstack-protector-guard-offset=0 \
-x c -c -o /dev/null /dev/null
clang: error: invalid value 'r2' in 'mstack-protector-guard-reg=', expected one of: r13
While GCC allows arbitrary registers, the implementation of
'-mstack-protector-guard=tls' in LLVM shares the same code path as the
user space thread local storage implementation, which uses a fixed
register (2 for 32-bit and 13 for 62-bit), so the command line parsing
enforces this limitation.
Use the Kconfig macro '$(m32-flag)', which expands to '-m32' when
supported, in the stack protector support cc-option call to properly
switch the target to a 32-bit one, which matches what happens in Kbuild.
While the 64-bit macro does not strictly need it, add the equivalent
64-bit option for symmetry.
Cc: stable@vger.kernel.org # 6.1+
Link: https://github.com/llvm/llvm-project/pull/110928 [1]
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241009-powerpc-fix-stackprotector-test-clang-v2-1-12fb86b31857@kernel.org
Add hash_supports_debug_pagealloc() helper to detect whether
debug_pagealloc can be supported on hash or not. This checks for both,
whether debug_pagealloc config is enabled and the linear map should
fit within rma_size/4 region size.
This can then be used early during htab_init_page_sizes() to decide
linear map pagesize if hash supports either debug_pagealloc or
kfence.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/c33c6691b2a2cf619cc74ac100118ca4dbf21a48.1729271995.git.ritesh.list@gmail.com
Enable kfence on book3s64 hash only when early init is enabled.
This is because, kfence could cause the kernel linear map to be mapped
at PAGE_SIZE level instead of 16M (which I guess we don't want).
Also currently there is no way to -
1. Make multiple page size entries for the SLB used for kernel linear
map.
2. No easy way of getting the hash slot details after the page table
mapping for kernel linear setup. So even if kfence allocate the
pool in late init, we won't be able to get the hash slot details in
kfence linear map.
Thus this patch disables kfence on hash if kfence early init is not
enabled.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/4a6eea8cfd1cd28fccfae067026bff30cbec1d4b.1729271995.git.ritesh.list@gmail.com
Both radix and hash on book3s requires to detect if kfence
early init is enabled or not. Hash needs to disable kfence
if early init is not enabled because with kfence the linear map is
mapped using PAGE_SIZE rather than 16M mapping.
We don't support multiple page sizes for slb entry used for kernel
linear map in book3s64.
This patch refactors out the common functions required to detect kfence
early init is enabled or not.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/f4a787224fbe5bb787158ace579780c0257f6602.1729271995.git.ritesh.list@gmail.com
Now that linear map functionality of debug_pagealloc is made generic,
enable kfence to use this generic infrastructure.
1. Define kfence related linear map variables.
- u8 *linear_map_kf_hash_slots;
- unsigned long linear_map_kf_hash_count;
- DEFINE_RAW_SPINLOCK(linear_map_kf_hash_lock);
2. The linear map size allocated in RMA region is quite small
(KFENCE_POOL_SIZE >> PAGE_SHIFT) which is 512 bytes by default.
3. kfence pool memory is reserved using memblock_phys_alloc() which has
can come from anywhere.
(default 255 objects => ((1+255) * 2) << PAGE_SHIFT = 32MB)
4. The hash slot information for kfence memory gets added in linear map
in hash_linear_map_add_slot() (which also adds for debug_pagealloc).
Reported-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/5c2b61941b344077a2b8654dab46efa0322af3af.1729271995.git.ritesh.list@gmail.com
Make size of the linear map to be allocated in RMA region to be of
ppc64_rma_size / 4. If debug_pagealloc requires more memory than that
then do not allocate any memory and disable debug_pagealloc.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/e1ef66f32a1fe63bcbb89d5c11d86c65beef5ded.1729271995.git.ritesh.list@gmail.com
Currently kernel_map_linear_page() function assumes to be working on
linear_map_hash_slots array. But since in later patches we need a
separate linear map array for kfence, hence make
kernel_map_linear_page() take a linear map array and lock in it's
function argument.
This is needed to separate out kfence from debug_pagealloc
infrastructure.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/5b67df7b29e68d7c78d6fc1f42d41137299bac6b.1729271995.git.ritesh.list@gmail.com
This adds hash_debug_pagealloc_alloc_slots() function instead of open
coding that in htab_initialize(). This is required since we will be
separating the kfence functionality to not depend upon debug_pagealloc.
Now that everything required for debug_pagealloc is under a #ifdef
config. Bring in linear_map_hash_slots and linear_map_hash_count
variables under the same config too.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/d1d5aabe1e4c693a983e59ccf3de08e3c28c5161.1729271995.git.ritesh.list@gmail.com
This adds hash_debug_pagealloc_add_slot() function instead of open
coding that in htab_bolt_mapping(). This is required since we will be
separating kfence functionality to not depend upon debug_pagealloc.
No functionality change in this patch.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/026f0aaa1dddd89154dc8d20ceccfca4f63ccf79.1729271995.git.ritesh.list@gmail.com
This just brings all linear map related handling at one place instead of
having those functions scattered in hash_utils file.
Makes it easy for review.
No functionality changes in this patch.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/56c610310aa50b5417976a39c5f15b78bc76c764.1729271995.git.ritesh.list@gmail.com
Kfence on book3s Hash on pseries is anyways broken. It fails to boot
due to RMA size limitation. That is because, kfence with Hash uses
debug_pagealloc infrastructure. debug_pagealloc allocates linear map
for entire dram size instead of just kfence relevant objects.
This means for 16TB of DRAM it will require (16TB >> PAGE_SHIFT)
which is 256MB which is half of RMA region on P8.
crash kernel reserves 256MB and we also need 2048 * 16KB * 3 for
emergency stack and some more for paca allocations.
That means there is not enough memory for reserving the full linear map
in the RMA region, if the DRAM size is too big (>=16TB)
(The issue is seen above 8TB with crash kernel 256 MB reservation).
Now Kfence does not require linear memory map for entire DRAM.
It only needs for kfence objects. So this patch temporarily removes the
kfence functionality since debug_pagealloc code needs some refactoring.
We will bring in kfence on Hash support in later patches.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/1761bc39674473c8878dedca15e0d9a0d3a1b528.1729271995.git.ritesh.list@gmail.com
copy_from_kernel_nofault() can be called when doing read of /proc/kcore.
/proc/kcore can have some unmapped kfence objects which when read via
copy_from_kernel_nofault() can cause page faults. Since *_nofault()
functions define their own fixup table for handling fault, use that
instead of asking kfence to handle such faults.
Hence we search the exception tables for the nip which generated the
fault. If there is an entry then we let the fixup table handler handle the
page fault by returning an error from within ___do_page_fault().
This can be easily triggered if someone tries to do dd from /proc/kcore.
eg. dd if=/proc/kcore of=/dev/null bs=1M
Some example false negatives:
===============================
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0
Invalid read at 0xc0000000fdff0000:
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0
Use-after-free read at 0xc0000000fe050000 (in kfence-#2):
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
Fixes: 90cbac0e99 ("powerpc: Enable KFENCE for PPC32")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a411788081d50e3b136c6270471e35aba3dfafa3.1729271995.git.ritesh.list@gmail.com
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
<stack trace>
==============
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010
flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA
raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable)
free_pcppages_bulk+0x1a8/0x2c8
free_unref_page_commit+0x3d4/0x4e4
free_unref_page+0x458/0x6d0
init_cma_reserved_pageblock+0x114/0x198
cma_init_reserved_areas+0x270/0x3e0
do_one_initcall+0x80/0x2f8
kernel_init_freeable+0x33c/0x530
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c
Fixes: 11ac3e87ce ("mm: cma: use pageblock_order as the single alignment")
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Sachin P Bappalige <sachinpb@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/3ae208e48c0d9cefe53d2dc4f593388067405b7d.1729146153.git.ritesh.list@gmail.com
This patch refactors all CMA related initialization and alignment code
to within fadump_cma_init() which gets called in the end. This also means
that we keep [reserve_dump_area_start, boot_memory_size] page aligned
during fadump_reserve_mem(). Then later in fadump_cma_init() we extract the
aligned chunk and provide it to CMA. This inherently also fixes an issue in
the current code where the reserve_dump_area_start is not aligned
when the physical memory can have holes and the suitable chunk starts at
an unaligned boundary.
After this we should be able to call fadump_cma_init() independently
later in setup_arch() where pageblock_order is non-zero.
Suggested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/805d6b900968fb9402ad8f4e4775597db42085c4.1729146153.git.ritesh.list@gmail.com
We anyway don't use any return values from fadump_cma_init(). Since
fadump_reserve_mem() from where fadump_cma_init() gets called today,
already has the required checks.
This patch makes this function return type as void. Let's also handle
extra cases like return if fadump_supported is false or dump_active, so
that in later patches we can call fadump_cma_init() separately from
setup_arch().
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a2afc3d6481a87a305e89cfc4a3f3d2a0b8ceab3.1729146153.git.ritesh.list@gmail.com
On powerpc64 as shown below by readelf, vDSO functions symbols have
type NOTYPE.
$ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg
ELF Header:
Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00
Class: ELF64
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: DYN (Shared object file)
Machine: PowerPC64
Version: 0x1
...
Symbol table '.dynsym' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
...
1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
...
4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
Symbol table '.symtab' contains 56 entries:
Num: Value Size Type Bind Vis Ndx Name
...
45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu
47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres
To overcome that, commit ba83b3239e ("selftests: vDSO: fix vDSO
symbols lookup for powerpc64") was applied to have selftests also
look for NOTYPE symbols, but the correct fix should be to flag VDSO
entry points as functions.
The original commit that brought VDSO support into powerpc/64 has the
following explanation:
Note that the symbols exposed by the vDSO aren't "normal" function symbols, apps
can't be expected to link against them directly, the vDSO's are both seen
as if they were linked at 0 and the symbols just contain offsets to the
various functions. This is done on purpose to avoid a relocation step
(ppc64 functions normally have descriptors with abs addresses in them).
When glibc uses those functions, it's expected to use it's own trampolines
that know how to reach them.
The descriptors it's talking about are the OPD function descriptors
used on ABI v1 (big endian). But it would be more correct for a text
symbol to have type function, even if there's no function descriptor
for it.
glibc has a special case already for handling the VDSO symbols which
creates a fake opd pointing at the kernel symbol. So changing the VDSO
symbol type to function shouldn't affect that.
For ABI v2, there is no function descriptors and VDSO functions can
safely have function type.
So lets flag VDSO entry points as functions and revert the
selftest change.
Link: 5f2dd691b6
Fixes: ba83b3239e ("selftests: vDSO: fix vDSO symbols lookup for powerpc64")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-By: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/b6ad2f1ee9887af3ca5ecade2a56f4acda517a85.1728512263.git.christophe.leroy@csgroup.eu
VDSO time functions do not call any other function, so they don't
need to save/restore LR. However, retrieving the address of VDSO data
page requires using LR hence saving then restoring it, which can be
heavy on some CPUs. On the other hand, VDSO functions on powerpc are
not standard functions and require a wrapper function to call C VDSO
functions. And that wrapper has to save and restore LR in order to
call the C VDSO function, so retrieving VDSO data page address in that
wrapper doesn't require additional save/restore of LR.
For random VDSO functions it is a bit different. Because the function
calls __arch_chacha20_blocks_nostack(), it saves and restores LR.
Retrieving VDSO data page address can then be done there without
additional save/restore of LR.
So lets implement __arch_get_vdso_rng_data() and simplify the wrapper.
It starts paving the way for the day powerpc will implement a more
standard ABI for VDSO functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a1a9bd0df508f1b5c04684b7366940577dfc6262.1727858295.git.christophe.leroy@csgroup.eu
The page containing VDSO time data is swapped with the one containing
TIME namespace data when a process uses a non-root time namespace.
For other data like powerpc specific data and RNG data, it means
tracking whether time namespace is the root one or not to know which
page to use.
Simplify the logic behind by moving time data out of first data page
so that the first data page which contains everything else always
remains the first page. Time data is in the second or third page
depending on selected time namespace.
While we are playing with get_datapage macro, directly take into
account the data offset inside the macro instead of adding that offset
afterwards.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/0557d3ec898c1d0ea2fc59fa8757618e524c5d94.1727858295.git.christophe.leroy@csgroup.eu
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
-----BEGIN PGP SIGNATURE-----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=1a8G
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Highlights:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
The following is an automated git shortlog grouped by driver:
ISST:
- Add Diamond Rapids to support list
- Fix the KASAN report slab-out-of-bounds bug
MAINTAINERS:
- Update Intel In Field Scan(IFS) entry
dell-ddv:
- Fix typo in documentation
dell-laptop:
- Do not fail when encountering unsupported batteries
dell-sysman:
- add support for alienware products
intel/pmc:
- Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86/intel:
- power-domains: Add Diamond Rapids support
wmi:
- Update WMI driver API documentation
x86-android-tablets:
- Fix use after free on platform_device_register() errors
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmcCbogUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xFEgf/UYsNHFO5P5IVwWIoXzyFgRNg8zQU
trABCxfCZztZOEwRVJKZ0lVLbkKULdBJE4Tj7RwhZiCubcupV5LJT5OLe5R+AFGK
qhG2FTo9uHacwEXPMZyBAnj+aW6sSnVATAQgBZFnZ0SdInuOjlAmMvAL48MfNnEO
Nw7EiGtAvkl7R9XHBsF7vs6EFewjy+ZFMoslZq90UUhfK51DCu74w7hv8vY5oG50
pstbW3aqn5nmCKcPhQNW7ZmG6ukpdKkl74u1hdW6JRuBruFrZWR6px1xax6+Q/Is
/ib4x69irCN+sBTX7fGTPNsO+Oaq0GmUfeiGdcZA2SjmIJ8P4yvPAuNBbw==
=Nfjz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
* Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
* Make sure that the host's vector length is at capped by a value
common to all CPUs
* Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
* Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
* Fix compilation with KVM_INTEL=KVM_AMD=n
* Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
* Fix compilation on non-x86 architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcCRMgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNIgf/T80+VxFy7eP1yTkZy9nd3UjSsAeT
fWvYMyN2isOTWTVbl3ckjMZc4i7L/nOngxfkLzI3OfFUO8TI8cw11hNFn85m+WKM
95DVgEaqz1kuJg25VjSj9AySvPFDNec8bV37C2vk2jF4YsGo6qBugSSjktZUgGiW
ozsdV39lcVcLf+x8/52Vc2eb736nrrYg8QaFP0tEQs9MHuYob/XBw3Zx42dJoZYl
tCjGP5oW7EvUdRD48GkgXP9DWA12QmDxNOHEmUdxWamsK88YQXFyWwb7uwV5x+hd
mO3bJaYInkJsh3D2e5QARswQb+D5HMVYFwvEkxQF/wvmcMosRVz4vv65Sw==
=P4uw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
- Allow r30 to be used in vDSO code generation of getrandom.
Thanks to: Jason A. Donenfeld.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZwIxiwAKCRAF0oADX8se
IbuQAQCzv/PrtxVkqQja5cTZeC/rrV4M1jIKsLpYe1voX3mDSAEA5NTime3l5VXm
SdsiFUBVa4fzp8Ipu9r98wVEGtm/SQw=
=ARIU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba97 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba014120 ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f26 ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760d ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
