No need to track the number of pages under I/O now that each
extent_buffer is read and written using a single bio. For the
read side we need to grab an extra reference for the duration of
the I/O to prevent eviction, though.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The checksumming of btree blocks always operates on the entire
extent_buffer, and because btree blocks are always allocated contiguously
on disk they are never split by btrfs_submit_bio.
Simplify the checksumming code by finding the extent_buffer in the
btrfs_bio private data instead of trying to search through the bio_vec.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we always use a single bio to write an extent_buffer, the buffer
can be passed to the end_io handler as private data. This allows
to simplify the metadata write end I/O handler, and merge the subpage
end_io handler into the main one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_bio_ctrl machinery is overkill for writing extent_buffers
as we always operate on PAGE_SIZE chunks (or one smaller one for the
subpage case) that are contiguous and are guaranteed to fit into a
single bio. Replace it with open coded btrfs_bio_alloc, __bio_add_page
and btrfs_submit_bio calls.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Locking the pages in lock_extent_buffer_for_io only for the non-subpage
case is very confusing. Move it to write_one_eb to mirror the subpage
case and simplify the code. Now lock_extent_buffer_for_io does not leave
all the pages locked and each is individually locked/unlocked in
write_one_eb.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stop trying to cluster writes of multiple extent_buffers into a single
bio. There is no need for that as the blk_plug mechanism used all the
way up in writeback_inodes_wb gives us the same I/O pattern even with
multiple bios. Removing the clustering simplifies
lock_extent_buffer_for_io a lot and will also allow passing the eb
as private data to the end I/O handler.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
lock_extent_buffer_for_io never returns a negative error value, so switch
the return value to a simple bool.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ keep noinline_for_stack ]
Signed-off-by: David Sterba <dsterba@suse.com>
Only subpage metadata reads lock the extent. Don't try to unlock it and
waste cycles in the extent tree lookup for PAGE_SIZE or larger metadata.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we always use a single bio to read an extent_buffer, the buffer
can be passed to the end_io handler as private data. This allows
implementing a much simplified dedicated end I/O handler for metadata
reads.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Given that read recovery for data I/O is handled in the storage layer,
the mirror_num argument to btrfs_submit_compressed_read is always 0,
so remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_bio_ctrl machinery is overkill for reading extent_buffers
as we always operate on PAGE_SIZE chunks (or one smaller one for the
subpage case) that are contiguous and are guaranteed to fit into a
single bio. Replace it with open coded btrfs_bio_alloc, __bio_add_page
and btrfs_submit_bio calls in a helper function shared between
the subpage and node size >= PAGE_SIZE cases.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently read_extent_buffer_pages skips pages that are already uptodate
when reading in an extent_buffer. While this reduces the amount of data
read, it increases the number of I/O operations as we now need to do
multiple I/Os when reading an extent buffer with one or more uptodate
pages in the middle of it. On any modern storage device, be that hard
drives or SSDs this actually decreases I/O performance. Fortunately
this case is pretty rare as the pages are always initially read together
and then aged the same way. Besides simplifying the code a bit as-is
this will allow for major simplifications to the I/O completion handler
later on.
Note that the case where all pages are uptodate is still handled by an
optimized fast path that does not read any data from disk.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
verify_parent_transid is only called by btrfs_buffer_uptodate, which
confusingly inverts the return value. Merge the two functions and
reflow the parent_transid so that error handling is in a branch.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Setting the buffer uptodate in a function that is named as a validation
helper is a it confusing. Move the call from validate_extent_buffer to
the one of its two callers that didn't already have a duplicate call
to set_extent_buffer_uptodate.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Call btrfs_page_clear_uptodate instead of ClearPageUptodate to properly
manage the uptodate bit for the subpage case.
Reported-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_buffer_under_io is only used in extent_io.c, so mark it static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is an internal error report that scrub found an error in an orphan
inode's data.
However there are very limited ways to cleanup such orphan inodes:
- btrfs_start_pre_rw_mount()
This happens at either mount, or RO->RW switch.
This is not a viable solution for root fs which may not be unmounted
or RO mounted.
Furthermore this doesn't cover every subvolume, it only covers the
currently cached subvolumes.
- btrfs_lookup_dentry()
This happens when we first lookup the subvolume dentry.
But dentry can be cached thus it's not ensured to be triggered every
time.
- create_snapshot()
This only happens for the created snapshot, not the source one.
This means if we didn't trigger orphan items cleanup, there is really no
other way to manually trigger it. Add this step to the START_SYNC ioctl.
This is a slight change in the semantics of the ioctl but as sync can be
potentially slow and is usually paired with WAIT_SYNC ioctl.
The errors are not handled because the main point of the ioctl is the
async commit, orphan cleanup is a side effect.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a comment at btrfs_init_new_buffer() that refers to a function
named btrfs_clean_tree_block(), however the function was renamed to
btrfs_clear_buffer_dirty() in commit 190a83391b ("btrfs: rename
btrfs_clean_tree_block to btrfs_clear_buffer_dirty"). So update the
comment to refer to the current name.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The for_rename argument of btrfs_record_unlink_dir() is defined as an
integer, but the argument is in fact used as a boolean. So change it to
a boolean to make its use more clear.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no point of having a label and goto at btrfs_record_unlink_dir()
because the function is trivial and can just return early if we are not
in a rename context. So remove the label and goto and instead return
early if we are not in a rename.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update the comments at btrfs_record_unlink_dir() so that they mention
where new names are logged and where old names are removed. Also, while
at it make the width of the comments closer to 80 columns and capitalize
the sentences and finish them with punctuation.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_record_unlink_dir() we directly check the logged_trans field of
the given inodes to check if they were previously logged in the current
transaction, and if any of them were, then we can avoid setting the field
last_unlink_trans of the directory to the id of the current transaction if
we are in a rename path. Avoiding that can later prevent falling back to
a transaction commit if anyone attempts to log the directory.
However the logged_trans field, store in struct btrfs_inode, is transient,
not persisted in the inode item on its subvolume b+tree, so that means
that if an inode is evicted and then loaded again, its original value is
lost and it's reset to 0. So directly checking the logged_trans field can
lead to some false negative, and that only results in a performance impact
as mentioned before.
Instead of directly checking the logged_trans field of the inodes, use the
inode_logged() helper, which will check in the log tree if an inode was
logged before in case its logged_trans field has a value of 0. This way
we can avoid setting the directory inode's last_unlink_trans and cause
future logging attempts of it to fallback to transaction commits. The
following test script shows one example where this happens without this
patch:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
num_init_files=10000
num_new_files=10000
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $num_init_files; i++)); do
echo -n > $MNT/testdir/file_$i
done
echo -n > $MNT/testdir/foo
sync
# Add some files so that there's more work in the transaction other
# than just renaming file foo.
for ((i = 1; i <= $num_new_files; i++)); do
echo -n > $MNT/testdir/new_file_$i
done
# Change the file, fsync it.
setfattr -n user.x1 -v 123 $MNT/testdir/foo
xfs_io -c "fsync" $MNT/testdir/foo
# Now triggger eviction of file foo but no eviction for our test
# directory, since it is being used by the process below. This will
# set logged_trans of the file's inode to 0 once it is loaded again.
(
cd $MNT/testdir
while true; do
:
done
) &
pid=$!
echo 2 > /proc/sys/vm/drop_caches
kill $pid
wait $pid
# Move foo out of our testdir. This will set last_unlink_trans
# of the directory inode to the current transaction, because
# logged_trans of both the directory and the file are set to 0.
mv $MNT/testdir/foo $MNT/foo
# Change file foo again and fsync it.
# This fsync will result in a transaction commit because the rename
# above has set last_unlink_trans of the parent directory to the id
# of the current transaction and because our inode for file foo has
# last_unlink_trans set to the current transaction, since it was
# evicted and reloaded and it was previously modified in the current
# transaction (the xattr addition).
xfs_io -c "pwrite 0 64K" $MNT/foo
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/foo
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "file fsync took: $dur milliseconds"
umount $MNT
Before this patch: fsync took 19 milliseconds
After this patch: fsync took 5 milliseconds
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At need_log_inode() we directly check the ->logged_trans field of the
given inode to check if it was previously logged in the transaction, with
the goal of skipping logging the inode again when it's not necessary.
The ->logged_trans field in not persisted in the inode item or elsewhere,
it's only stored in memory (struct btrfs_inode), so it's transient and
lost once the inode is evicted and then loaded again. Once an inode is
loaded, we are conservative and set ->logged_trans to 0, which may mean
that either the inode was never logged in the current transaction or it
was logged but evicted before being loaded again.
Instead of checking the inode's ->logged_trans field directly, we can
use instead the helper inode_logged(), which will really check if the
inode was logged before in the current transaction in case we have a
->logged_trans field with a value of 0. This will prevent unnecessarily
logging an inode when it's not needed, and in some cases preventing a
transaction commit, in case the logging requires a fallback to a
transaction commit. The following test script shows a scenario where
due to eviction we fallback a transaction commit when trying to fsync
a file that was renamed:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
num_init_files=10000
num_new_files=10000
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $num_init_files; i++)); do
echo -n > $MNT/testdir/file_$i
done
echo -n > $MNT/testdir/foo
sync
# Add some files so that there's more work in the transaction other
# than just renaming file foo.
for ((i = 1; i <= $num_new_files; i++)); do
echo -n > $MNT/testdir/new_file_$i
done
# Fsync the directory first.
xfs_io -c "fsync" $MNT/testdir
# Rename file foo.
mv $MNT/testdir/foo $MNT/testdir/bar
# Now trigger eviction of the test directory's inode.
# Once loaded again, it will have logged_trans set to 0 and
# last_unlink_trans set to the current transaction.
echo 2 > /proc/sys/vm/drop_caches
# Fsync file bar (ex-foo).
# Before the patch the fsync would result in a transaction commit
# because the inode for file bar has last_unlink_trans set to the
# current transaction, so it will attempt to log the parent directory
# as well, which will fallback to a full transaction commit because
# it also has its last_unlink_trans set to the current transaction,
# due to the inode eviction.
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir/bar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "file fsync took: $dur milliseconds"
umount $MNT
Before this patch: fsync took 22 milliseconds
After this patch: fsync took 8 milliseconds
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are defined in the scrub.c file, but last callers were
removed in e9255d6c40 ("btrfs: scrub: remove the old scrub recheck
code").
fs/btrfs/scrub.c:553:20: warning: unused function 'scrub_stripe_index_and_offset'.
fs/btrfs/scrub.c:543:19: warning: unused function 'scrub_nr_raid_mirrors'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4937
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Smatch reports the following errors related to commit ("btrfs: output
affected files when relocation fails"):
fs/btrfs/inode.c:283 print_data_reloc_error()
error: uninitialized symbol 'ref_level'.
[CAUSE]
That part of code is mostly copied from scrub, but unfortunately scrub
code from the beginning is not doing the error handling properly.
The offending code looks like this:
do {
ret = tree_backref_for_extent();
btrfs_warn_rl();
} while (ret != 1);
There are several problems involved:
- No error handling
If that tree_backref_for_extent() failed, we would output the same
error again and again, never really exit as it requires ret == 1 to
exit.
- Always do one extra output
As tree_backref_for_extent() only return > 0 if there is no more
backref item.
This means after the last item we hit, we would output an invalid
error message for ret > 0 case.
[FIX]
Fix the old code by:
- Move @ref_root and @ref_level into the if branch
And do not initialize them, so we can catch such uninitialized values
just like what we do in the inode.c
- Explicitly check the return value of tree_backref_for_extent()
And handle ret < 0 and ret > 0 cases properly.
- No more do {} while () loop
Instead go while (true) {} loop since we will handle @ret manually.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_redirty_list_add redirties a buffer, it also acquires
an extra reference that is released on transaction commit. But
this is not required as buffers that are dirty or under writeback
are never freed (look for calls to extent_buffer_under_io())).
Remove the extra reference and the infrastructure used to drop it
again.
History behind redirty logic:
In the first place, it used releasing_list to hold all the
to-be-released extent buffers, and decided which buffers to re-dirty at
the commit time. Then, in a later version, the behaviour got changed to
re-dirty a necessary buffer and add re-dirtied one to the list in
btrfs_free_tree_block(). In short, the list was there mostly for the
patch series' historical reason.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ add Naohiro's comment regarding history ]
Signed-off-by: David Sterba <dsterba@suse.com>
dirty_metadata_bytes is decremented in both places that clear the dirty
bit in a buffer, but only incremented in btrfs_mark_buffer_dirty, which
means that a buffer that is redirtied using btrfs_redirty_list_add won't
be added to dirty_metadata_bytes, but it will be subtracted when written
out, leading an inconsistency in the counter.
Move the dirty_metadata_bytes from btrfs_mark_buffer_dirty into
set_extent_buffer_dirty to also account for the redirty case, and remove
the now unused set_extent_buffer_dirty return value.
Fixes: d3575156f6 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Mark btrfs_run_discard_work static and move it above its callers.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This exists internal to ctree.c, however btrfs check needs to use it for
some of its operations. I'd rather not duplicate that code inside of
btrfs check as this is low level and I want to keep this code in one
place, so rename the function to btrfs_del_ptr and export it so that it
can be used inside of btrfs-progs safely. Add a comment to make sure
this doesn't get removed by a future cleanup.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is needed in btrfs-progs for the tools that convert the checksum
types for file systems and a few other things. We don't have it in the
kernel as we just want to get the size for the super blocks type.
However I don't want to have to manually add this every time we sync
ctree.c into btrfs-progs, so add the helper in the kernel with a note so
it doesn't get removed by a later cleanup.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to override this in btrfs-progs, so wrap this in the __KERNEL__
check so we can easily sync this to btrfs-progs and have our local
version of btrfs_no_printk do the work.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These are more related to the inode item flags on disk than the
in-memory btrfs_inode, move the helpers to inode-item.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is more a buffer validation helper, move it into the tree-checker
files where it makes more sense.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This helper returns a btrfs_tree_block_status for the various errors,
and then btrfs_check_node() will return -EUCLEAN if it gets anything
other than BTRFS_TREE_BLOCK_CLEAN which will be used by the kernel. In
the future btrfs-progs will use this helper instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of blanket returning -EUCLEAN for all the failures in
btrfs_check_leaf, use btrfs_tree_block_status and return the appropriate
status for each failure. Rename the helper to __btrfs_check_leaf and
then make a wrapper of btrfs_check_leaf that will return -EUCLEAN to
non-clean error codes. This will allow us to have the
__btrfs_check_leaf variant in btrfs-progs while keeping the behavior in
the kernel consistent.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a variety of item specific errors that can occur. For now
simply put these under the umbrella of BTRFS_TREE_BLOCK_INVALID_ITEM,
this can be fleshed out as we need in the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use this in btrfs-progs to determine if we can fix different types of
corruptions. We don't care about this in the kernel, however it would
be good to share this code between the kernel and btrfs-progs, so add
the status definitions so we can start converting the tree-checker code
over to using these status flags instead of blanket returning -EUCLEAN.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two helpers for checking leaves, because we have an extra check
for debugging in btrfs_mark_buffer_dirty(), and at that stage we may
have item data that isn't consistent yet. However we can handle this
case internally in the helper, if BTRFS_HEADER_FLAG_WRITTEN is set we
know the buffer should be internally consistent, otherwise we need to
skip checking the item data.
Simplify this helper down a single helper and handle the item data
checking logic internally to the helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We just pass in btrfs_header_level(eb) for the level, and we're passing
in the eb already, so simply get the level from the eb inside of
btrfs_set_block_flags.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is completely related to block rsv's, move it out of the free space
cache code and into block-rsv.c.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For P/Q stripe scrub, we have quite some duplicated read IO:
- Data stripes read for verification
This is triggered by the scrub_submit_initial_read() inside
scrub_raid56_parity_stripe().
- Data stripes read (again) for P/Q stripe verification
This is triggered by scrub_assemble_read_bios() from scrub_rbio().
Although we can have hit rbio cache and avoid unnecessary read, the
chance is very low, as scrub would easily flush the whole rbio cache.
This means, even we're just scrubbing a single P/Q stripe, we would read
the data stripes twice for the best case scenario. If we need to
recover some data stripes, it would cause more reads on the same data
stripes, again and again.
However before we call raid56_parity_submit_scrub_rbio() we already
have all data stripes repaired and their contents ready to use.
But RAID56 cache is unaware about the scrub cache, thus RAID56 layer
itself still needs to re-read the data stripes.
To avoid such cache miss, this patch would:
- Introduce a new helper, raid56_parity_cache_data_pages()
This function would grab the pages from an array, and copy the content
to the rbio, marking all the involved sectors uptodate.
The page copy is unavoidable because of the cache pages of rbio are all
self managed, thus can not utilize outside pages without screwing up
the lifespan.
- Use the repaired data stripes as cache inside
scrub_raid56_parity_stripe()
By this, we ensure all the data sectors of the scrub rbio are already
uptodate, and no need to read them again from disk.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Removing a free space entry from an in memory space cache requires having
the corresponding btrfs_free_space_ctl's 'tree_lock' held. We have several
code paths that remove an entry, so add assertions where appropriate to
verify we are holding the lock, as the lock is acquired by some other
function up in the call chain, which makes it easy to miss in the future.
Note: for this to work we need to lock the local btrfs_free_space_ctl at
load_free_space_cache(), which was not being done because it's local,
declared on the stack, so no other task has access to it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When linking a free space entry, at link_free_space(), the caller should
be holding the spinlock 'tree_lock' of the given btrfs_free_space_ctl
argument, which is necessary for manipulating the red black tree of free
space entries (done by tree_insert_offset(), which already asserts the
lock is held) and for manipulating the 'free_space', 'free_extents',
'discardable_extents' and 'discardable_bytes' counters of the given
struct btrfs_free_space_ctl.
So assert that the spinlock 'tree_lock' of the given btrfs_free_space_ctl
is held by the current task. We have multiple code paths that end up
calling link_free_space(), and all currently take the lock before calling
it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When searching for a free space entry by offset, at tree_search_offset(),
we are supposed to have the btrfs_free_space_ctl's 'tree_lock' held, so
assert that. We have multiple callers of tree_search_offset(), and all
currently hold the necessary lock before calling it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are multiple code paths leading to tree_insert_offset(), and each
path takes the necessary locks before tree_insert_offset() is called,
since they do other things that require those locks to be held. This makes
it easy to miss the locking somewhere, so make tree_insert_offset() assert
that the required locks are being held by the calling task.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For the in-memory component of space caching (free space cache and free
space tree), three of the arguments passed to tree_insert_offset() can
always be taken from the new free space entry that we are about to add.
So simplify tree_insert_offset() to take the new entry instead of the
'offset', 'node' and 'bitmap' arguments. This will also allow to make
further changes simpler.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The are two computations of end offsets at do_trimming() that are not
necessary, as they were previously computed and stored in local const
variables. So just use the variables instead, to make the source code
shorter and easier to read.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At try_merge_free_space(), avoid calling twice rb_prev() to find the
previous node, as that requires looping through the red black tree, so
store the result of the rb_prev() call and then use it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At copy_free_space_cache(), we add a new entry to the block group's ctl
before we free the entry from the temporary ctl. Adding a new entry
requires the allocation of a new struct btrfs_free_space, so we can
avoid a temporary extra allocation by freeing the entry from the
temporary ctl before we add a new entry to the main ctl, which possibly
also reduces the chances for a memory allocation failure in case of very
high memory pressure. So just do that.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A small code simplification, move the default value of transid to its
initialization and remove the else-statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
