Commit Graph

98 Commits

Author SHA1 Message Date
Steven Toth
1117d6ba13 V4L/DVB (7287): cx88: add analog support for DVICO FusionHDTV7 Gold
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Chris Pascoe
b3fb91d20c V4L/DVB (7258): Support DVB-T tuning on the DViCO FusionHDTV DVB-T Pro
Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board.

The IR remote and analog tuner are not supported at this time.

Some changes made by Mauro Chehab to allow merging it with some other xc3028
patches.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
9507901ef3 V4L/DVB (7257): cx88: Add xc2028/3028 boards
This patch ports a patch from Markus Rechberger to work with tuner-xc2028.
It adds entries for several cx88 boards with xc2038/3028 tuners.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Steven Toth
5c00fac0ba V4L/DVB (7252): cx88: Add support for the Dvico PCI Nano
ATSC is known to work.
SVideo / Composite should work (I have no cable to test).
Analog tuner support does not work.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Roland Stoll
27d0fe1894 V4L/DVB (7194): cx88-mpeg: Allow concurrent access to cx88-mpeg devices
It currently isn't possible to open the frontend device of cx88-mpeg devices
(DVB or Blackbird) multiple times concurrently. (for instance, to attach a
signal monitoring tool while reading a stream, or to send a frequency change
ioctl) This patch fixes that condition.

Signed-off-by: Roland Stoll <roland@xindex.de>
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18 11:15:19 -03:00
Steven Toth
60464da8b1 V4L/DVB (7043): New card supported(partially): Pinnacle 800i
From Zhang: This patch continues the support for the Pinnacle HD 800i.

Patch committed as-is, cleanups to follow ... Steve

Signed-off-by: Chaogui Zhang <czhang1974@gmail.com>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:06 -02:00
Michael Krufky
35e420357b V4L/DVB (6837): Convert cx88_input.audioroute to a bitfield
Prevent us from wasting some extra bytes of memory

Thanks to Trent Piepho, for pointing this out.


Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:03:50 -02:00
Ricardo Cerqueira
7b27d45bb5 V4L/DVB (6831): Audio routes fix for blackbird boards with the wm8775 ADC
Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds.

The wm8775 module initializes the audio input at "route 2", which doesn't
hold true for all boards. The HVR-1300, for example, uses route 1 for
tuner audio, and route 2 for baseband. So we must route the audio to the
proper input depending on what video input is being used.

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:03:48 -02:00
Jelle Foks
f9e54e0c84 V4L/DVB (6828): cx88-blackbird: audio improvements
This patch should fix the 'muted audio' and 'raspy audio' problem for
mpeg2 streams out of cx88-blackbird devices.

Especially mythtv users would find that the audio would often sound bad
(aliased, or 'raspy'), mainly related to channel changes, many (all?)
other users would find that there was no audio at all in the mpeg data
from the encoder chip, unless the audio was manually unmuted.

The patch includes the following modifications:

Don't actually start the mpeg2 encoder until the device is read from
by the application.

Wait until the audio is stable for at least 400ms before starting the
mpeg encoder.

Mute/Unmute the audio when starting/stopping the mpeg encoder.

Stop the mpeg encoder when changing parameters and when changing tuner
frequency.

Add a variable 'mpeg_active' to struct cx8802_dev to allow tracking of
whether or not the mpeg2 encoder is active.

Load the firmware on cx88-blackbird driver load.

Signed-off-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:03:47 -02:00
Adrian Bunk
a2fbaa519b V4L/DVB (6576): cx88-mpeg.c: make 4 functions static
This patch makes the following needlessly global functions static:
- cx8802_init_common()
- cx8802_fini_common()
- cx8802_suspend_common()
- cx8802_resume_common()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:02:05 -02:00
Trent Piepho
081c2fc8b9 V4L/DVB (6334): cx88: Change (struct cx8802_dev)->drvlist to a list_head and fix bugs
It was a struct cx8802_driver for no apparent reason.  Nothing uses a
cx8802_driver in the cx8802_dev struct.  The only field that was used was
devlist, a list_head.

The code in cx8802_remove() that removed any loaded sub-drivers was broken.
It would delete the current list entry, but didn't use list_for_each_safe.  It
also called list_del() on the list _head_ inside the list_for_each loop?  It
would crash if it was run, which I don't think can ever happen.

Since the cx8802 sub-drivers use the cx8802 driver, they have to be unloaded
first.  So there isn't any way for a sub-driver to still be loaded when
cx8802_remove() is called...  Except maybe with PCI hot-plug, if one removes
the PCI card while the drivers are loaded?

So I left some code in to handle that if it's actually possible.  It will
remove the sub-drivers from the device cx8802_remove() was called on, and only
that device.  If one has two DVB cards and unplugs one, there is no reason to
unload the DVB drivers for both cards.  I have no way to test this, but it
can't be worse than what was there before.

cx8802_get_driver() is passed a cx8802_dev pointer and looks for the requested
driver on that device.  It first loops over the cx8802 device list looking for
the device it was passed, which is pointless.  It doesn't need to find the
device pointer in the list, as it already has the pointer.

The list_head in the cx8802_driver struct, which joins all the _drivers_
attached to a device, was named devlist.  Changed that to drvlist, since the
devlist is used for a list of _devices_ in other cx8802 structs.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22 12:01:43 -02:00
Trent Piepho
f0ad90975b V4L/DVB (6333): cx88: Change void* card_priv to struct vp3054_i2c_state
card_priv was only used to store a pointer to the vp3054 state struct.
There's no need to use a void * since it doesn't have multiple types.

Make the field conditional on VP3045 support.  It was already conditional on
DVB support, but it's only used if VP3045 support is on, so that makes for a
better option to check.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22 12:01:42 -02:00
Trent Piepho
7717cbedd9 V4L/DVB (6332): cx88: Only include the blackbird fields if blackbird is selected
Add some ifdefs around fields only used for blackbird support, similar to the
way the dvb fields are only included with dvb support.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22 12:01:42 -02:00
Trent Piepho
5a3ebe8755 V4L/DVB (6283): videobuf: Remove references to old Kconfig option name
CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB.

But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB
or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver.

The reference in cx23885.h should just be removed, as the code there needs to
be included if DVB is on or off.  I do not think you can even compile the
cx23885 driver without DVB.  It's clearly just leftover from when the file was
obvious copied from the cx88 driver (which is not mentioned in the copyright
BTW).

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10 00:03:08 -03:00
Mauro Carvalho Chehab
ba366a23b6 V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with the other patches
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10 00:02:46 -03:00
Mauro Carvalho Chehab
c1accaa21b V4L/DVB (6252): Adapt drivers to use the newer videobuf modules
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo.

Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct.
So, to access it, a subroutine call is needed.

This patch renames all occurences of those function calls to be
consistent with the video-buf split.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981
Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09 22:14:55 -03:00
Mauro Carvalho Chehab
13595a51c0 V4L/DVB (6247): Fix bug #8689: Fixes IR stop/start during suspend/resume
IR workqueue should be disabled during suspend. This avoids some troubles, like
the one reported on bug #8689:

"The Hauppauge HVR 1100 ir-remote control does not work after resume from
suspend to ram or disk."

This patch disables IR before suspending, re-enabling it after resume.

Thanks to Peter Poklop <Peter.Poklop@gmx.at> for reporting it and helping with
the fix.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Reviewed-by: Peter Poklop <Peter.Poklop@gmx.at>
2007-10-09 22:14:51 -03:00
Trent Piepho
05b2723387 V4L/DVB (6083): cx88-alsa: Rework buffer handling
Rework the way the DMA buffer is handled and IRQs are generated.

ALSA uses a ring-buffer of multiple periods.  Each period is supposed to
corrispond to one IRQ.

The existing driver was generating one interrupt per ring-buffer, as opposed
to per period.  This meant that as soon as the IRQ was generated, the hardware
was already starting to re-write the beginning of the buffer.  Since the DMA
happens on a per-line basis, there was only a narrow window to copy the data
out before the buffer was overwritten.

The cx88 core RISC program generator is modified so that it can set the IRQ
and counter flags to count every X lines of DMA transfer.  This way we can
generate an interrupt every period instead of every full ring-buffer.  Right
now only period of one line are supported, but it should be possible to
support longer periods.  Note that a WRITE instruction generates an IRQ when
it starts, not when the transfer is finished.  Thus to generate an IRQ when
line X is done, one must set the IRQ flag on the instruction that starts line
X+1, not the one that ends line X.

Change the line size so that there are four lines in the SRAM FIFO.  If there
are not four lines, the analog output from the cx88's internal DACs is full of
clicks and pops.

Try to handle FIFO sync errors.  Sometimes the chip generates many of these
errors before audio data starts.  Up to 50 sync errors will be ignored and the
counter reset.

Have the IRQ handler save the RISC counter to the chip struct, and then have
the pointer callback use this to calculate the pointer position.  We could
read the counter from the pointer callback, but sometimes the sync errors on
start up cause the counter to go crazy.  ALSA sees this and thinks there has
been an overrun.  The IRQ hander can avoid saving the counter position on
sync errors.

The chip "opened" flag wasn't necessary.  ALSA won't try to open the same
substream multiple times.  Probably this code was cut&pasted from the bt87x
driver, which has multiple sub-streams for one chip.

Do error checking for the videobuf mapping functions.

snd_card_cx88_runtime_free() is useless and can be deleted.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:06:34 -03:00
Trent Piepho
bbc83597df V4L/DVB (6022): cx88: Move card core creation from cx88-core.c to cx88-cards.c
A lot of code in cx88-cards.c was only used by cx88-core.c when the core state
is first allocated and initialized.  Moving that task to cx88-cards makes the
driver simpler and the files more self contained.

- Module parameters tuner, radio, card, and latency move to cx88-cards.c
- cx88_boards is made static
- cx88_subids is made static and const
- cx88_bcount is eliminated
- cx88_idcount is eliminated
- cx88_card_list() is made static
- cx88_card_setup_pre_i2c() is made static
- cx88_card_setup() is made static
- cx88_pci_quirks() is moved from cx88-core to cx88-cards
  The function argument "char *name" is made const too
- get_ressources() is moved from cx88-core to cx88-cards, and renamed to
  cx88_get_resources()
- The code to allocate and initialize the core state struct and the chip is
  moved out of cx88-core.c:cx88_get_core() and into a new function in
  cx88-cards.c, cx88_core_create().  This makes both functions simpler.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:16 -03:00
Trent Piepho
6a59d64c5c V4L/DVB (6021): cx88: Copy board information into card state
The cx88 driver state stored the ID of the board type in core->board.  Every
time the driver need to get some information about the board configuration, it
uses the board number as an index into board configuration array.

This patch changes it so that the board number is in core->boardnr, and
core->board is a copy of the board configuration information.  This allows
access to board information without the extra indirection.  e.g.
cx88_boards[core->board].mpeg becomes core->board.mpeg.

This has a number of advantages:
- The code is simpler to write.

- It compiles to be smaller and faster, without needing the extra array lookup
  to get at the board information.

- The cx88_boards array no longer needs to be exported to all cx88 modules.

- The boards array can be made const

- It should be possible to avoid keeping the (large) cx88_boards array around
  after the module is loaded.

- If module parameters or eeprom info override some board configuration
  setting, it's not necessary to modify the boards array, which would
  affect all boards of the same type.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:16 -03:00
Trent Piepho
c252b05115 V4L/DVB (6019): cx88: Make card database more memory efficient
The vmux setting is only two bits, but was taking up a whole 32 
in the input description struct.  By changing it to a two-bit 
bitfield, it can fit in what was padding space before and drop 
the input size by 4 bytes, from 28 to 24. This drops the board 
description struct, which has 9 inputs, from 280 to 244 bytes.  
Total driver size decreases by 2108 bytes.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:12 -03:00
Mauro Carvalho Chehab
fe06fe0a4d V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20 17:35:51 -03:00
Michael Krufky
6d7930e0cd V4L/DVB (5772): Cx88: remove two unused pointers from struct cx8802_dev
The following two pointers in struct cx8802_dev are unused - remove them:

void* fe_handle;
int   (*fe_release)(void *handle);

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:13 -03:00
Michael Krufky
e0099e9eda V4L/DVB (5734): Cx88: kill dev->fw_size
Now that cx88-blackbird is only accepting the official firmware image,
we no longer have any need to store the size of the firmware inside the
cx88 data structure.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:23:52 -03:00
Daniel Gimpelevich
7cb47a1460 V4L/DVB (5685): Cx88: add support for ADS Tech Instant Video PCI
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:23:37 -03:00
Michael Krufky
7b68814d79 V4L/DVB (5637): Cx88: kill core->pll_desc and core->pll_addr
Now that dvb-pll is being used properly in all cx88-dvb instances,
the cx88 driver no longer needs to store pll_desc nor pll_addr.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:23:30 -03:00
Mauro Carvalho Chehab
66623a0419 V4L/DVB (5480): Fix cx88_print_irqbits calls to use ARRAY_SIZE
cx88_print_irqbits were expecting a string pointer with 32 bytes. Better 
to pass the string size and use ARRAY_SIZE on its calls.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 15:45:13 -03:00
Markus Rechberger
77b7477467 V4L/DVB (5298): Added support for deferred module requesting to cx88
added support for deferred module requesting to cx88

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 15:43:25 -03:00
Michael Krufky
af70dbd334 V4L/DVB (5260): Cx88-blackbird: allow usage of both 376836 and 262144 sized firmware images
This updates the cx88-blackbird driver to be able to use the new cx23416
firmware image released by Hauppauge Computer Works, while retaining
compatibility with the older firmware images.
cx2341x firmware can be downloaded at: http://dl.ivtvdriver.org/ivtv/firmware/

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-03 10:14:36 -02:00
Trent Piepho
05ad390724 V4L/DVB (5166): Remove obsolete alias defines of CONFIG_* settings
The out of tree v4l-dvb build system didn't always override the kernel's
configuration settings with v4l-dvb's settings correctly.  To work around
this, makefiles would define some new macro based on the setting of a
config variable.  e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if
CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set.
The v4l-dvb build system should now always override correctly, and this
is no longer necessary.  This patch gets ride of these extra defines and
just uses the CONFIG_* settings directly.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:35:11 -02:00
Mauro Carvalho Chehab
b3c4ee7016 V4L/DVB (5109): Convert cx88-blackbird to use video_ioctl2
This patch finishes cx88-blackbird conversion to use video_ioctl2. Video
standards are generated automatically inside videodev.c. the big ioctl
parser is removed, using, instead, video_ioctl2.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:46 -02:00
Mauro Carvalho Chehab
63ab1bdc3b V4L/DVB (5102): make videodev to auto-generate standards
v4l2_tvnorm were meant to describe video standards and its names to V4L2 API.
However, this were doing by some static structures at the driver.

This patch changes the internals in a way that, at the driver, only a
v4l2_tvnorm (a 64 bit integer) should be filled, with all supported 
tvnorms. videodev will dynamically generate the proper API array
based on supported standards.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:44 -02:00
Mauro Carvalho Chehab
54da49f5a4 V4L/DVB (5100): Make cx88-blackbird to work again
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:43 -02:00
Mauro Carvalho Chehab
8d87cb9f31 V4L/DVB (5097): Convert cx8800 driver to video_ioctl2 handler
video_ioctl2 handler provides V4L2 API parsing.
Using it makes the driver simpler, and isolates API parsing.
This allows future reusage of driver controls using other ways, like sysfs
and/or procfs and increases isolation of driver-specific handling from the
generic common ioctl processing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:42 -02:00
Mauro Carvalho Chehab
315eb962d2 V4L/DVB (4980): Fixes bug 7267: PAL/60 is not working
On cx88 driver, sampling rate should be at chroma subcarrier freq (FSC).
However, driver were programming wrong values for PAL/60, PAL/Nc and
NTSC 4.43. This patch do the proper calculation. It also calculates
htotal, hdelay and hactive constants, according with the sampling
rate.
It is tested with PAL/60 by Piotr Maksymuk and Olivier. Also tested with
the already-supported standards.

Test is still required for PAL/Nc.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-27 14:19:26 -02:00
Michael Krufky
f24546a95a V4L/DVB (4757): Cx88: determine whether or not to use external adc
Some cx88-blackbird boards use an external adc, but not necessarily
for all inputs.  Thus, this needs to be configurable on the card level
for each input.
This patch allows for the usage of the external adc to be determined
by a bit setting in the cx88_input struct for cards based on the cx88
blackbird design.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10 08:50:55 -02:00
Steven Toth
6c5be74c86 V4L/DVB (4676): Dynamic cx88 mpeg port management for HVR1300 MPEG2/DVB-T support.
A series of patches to change the cx88 framework to allow the
PCI mpeg port to be shared dynamically between different
types of drivers or applications. This patch changes the cx88-dvb
and cx88-blackbird drivers to become 'sub drivers' of a higher
single cx88-mpeg driver.
The cx88-mpeg driver is a superset of the previous cx88-mpeg/blackbird
drivers and now owns the IRQ. cx88-dvb/blackbird now become mini drivers,
registering themselves with cx88-mpeg through a standard interface with
callbacks.
Sub drivers request access to hardware via the cx88-mpeg driver. In turn
the cx88-mpeg driver determines whether the hardware is busy and accepts
or refuses the request, grant access using callbacks into the sub drivers.
The net effect is that you are no longer able to tamper with the mpeg port
from multiple different applications at the same time, potentially breaking
a live mpeg2 hardware encoding or dvb stream.
The mechanism extends to enable multiple dvb frontends to be registered
and share the single resource.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10 08:50:47 -02:00
Richard Knutsson
f1db955acb V4L/DVB (4684): Drivers/media/video/cx88: Remove unused defined FALSE/TRUE
Remove defines of FALSE/TRUE because they are not used.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03 15:14:43 -03:00
Michael Krufky
48d5e8031e V4L/DVB (4668): Cx88: rename mpeg capability flags from CX88_BOARD_FOO to CX88_MPEG_FOO
The flags for mpeg capabilities are sub-optimally named as
CX88_BOARD_DVB and CX88_BOARD_BLACKBIRD, which creates some confusion.
This patch renames the above to CX88_MPEG_DVB and CX88_MPEG_BLACKBIRD.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03 15:13:56 -03:00
Steven Toth
3a5ba52a1a V4L/DVB (4667): Changed cx88_board .dvb and .register to an enum.
Some basic cleanup in preperation for a future patch where
the cx88-mpeg functions have to deal with the port being
used by multiple frontends in (mpeg2 hw encoder and dvb demod).

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03 15:13:54 -03:00
Steven Toth
3057906df5 V4L/DVB (4666): Ensure the WM8775 driver is loaded generically for any board.
A generic change to cards to allow any board to specify whether
it needs the wm8775 module loaded (by the core) or not.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03 15:13:48 -03:00
Steven Toth
aa481a6547 V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300.
This is the first in a series of patches to add full WinTV-HVR1300
support to Linux. This first patch will enable analog TV support
and DVB-T support. Later patches will add the hardware MPEG encoder
support.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:36 -03:00
David Bussenschutt
2acadefa31 V4L/DVB (4362): Cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV Tuner card support
Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for
Swann PCI TV Tuner Card

Signed-off-by: David Bussenschutt <buzz@oska.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:17 -03:00
Peter Naulls
d1009bd733 V4L/DVB (4361): Cx88: add support for Norwood PCI TV Tuner (non-pro)
This patch adds support for Norwood PCI TV Tuner (non-pro)

Signed-off-by: Peter Naulls <peter@chocky.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:17 -03:00
Eric Thomas
ad10c930e8 V4L/DVB (4359): Cx88: add initial support for Hauppauge HVR3000 trimode card
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
only analog is working for now

Signed-off-by: Eric Thomas <ethomas@claranet.fr>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:15 -03:00
Saqeb Akhter
c02a34f4e3 V4L/DVB (4285): Cx88: add support for Geniatech Digistar / Digiwave 103g
This patch adds support for the Geniatech Digistar, aka
Digiwave 103g DVB-S card.
Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net>

Signed-off-by: Saqeb Akhter <johoja@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30 15:59:46 -03:00
Michael Krufky
38a2713ada V4L/DVB (4264): Cx88-blackbird: implement VIDIOC_QUERYCTRL and VIDIOC_QUERYMENU
This patch implements the newer v4l2 control features to make the
standard user controls and mpeg encoder controls of cx88-blackbird
video encoder boards available to userspace.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30 15:59:27 -03:00
Adrian Bunk
dff47bf21b V4L/DVB (4213): Cx88: cleanups
remove the following unused hooks:
- cx88-blackbird.c: cx88_ioctl_hook()
- cx88-blackbird.c: cx88_ioctl_translator()
make the following needlessly global functions static:
- cx88-tvaudio.c: cx88_detect_nicam()
remove the following unused EXPORT_SYMBOL's:
- cx88-cards.c: cx88_bcount
- cx88-cards.c: cx88_subids
- cx88-cards.c: cx88_idcount
- cx88-cards.c: cx88_card_list
- cx88-cards.c: cx88_card_setup
- cx88-core.c: cx88_start_audio_dma
- cx88-core.c: cx88_stop_audio_dma
- cx88-i2c.c: cx88_i2c_init

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-26 09:20:51 -03:00
Hans Verkuil
f022156b33 V4L/DVB (4196): Port cx88-blackbird to the new MPEG API.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 02:05:22 -03:00
Ricardo Cerqueira
be4f451975 V4L/DVB (4088): Fixes for card cx88 #50
The description of the card has been updated to it's full name/model.
The tuner has also been switched to a more compatible one (radio
wasn't working, now it is)

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 02:05:07 -03:00