Given all the locking rework in mac80211, we pretty much
need to get into the driver with the wiphy mutex held in
all callbacks. This is already mostly the case, but as
Johan reported, in the get_txpower it may not be true.
Lock the wiphy mutex around nl80211_send_iface(), then
is also around callers of nl80211_notify_iface(). This
is easy to do, fixes the problem, and aligns the locking
between various calls to it in different parts of the
code of cfg80211.
Fixes: 0e8185ce1d ("wifi: mac80211: check wiphy mutex in ops")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/r/ZVOXX6qg4vXEx8dX@hovoldconsulting.com
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We want to guarantee the mutex is held for pretty much
all operations, so ensure that here as well.
Reported-by: syzbot+7e59a5bfc7a897247e18@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
My prior race fix here broke CQM when ranges aren't used, as
the reporting worker now requires the cqm_config to be set in
the wdev, but isn't set when there's no range configured.
Rather than continuing to special-case the range version, set
the cqm_config always and configure accordingly, also tracking
if range was used or not to be able to clear the configuration
appropriately with the same API, which was actually not right
if both were implemented by a driver for some reason, as is
the case with mac80211 (though there the implementations are
equivalent so it doesn't matter.)
Also, the original multiple-RSSI commit lost checking for the
callback, so might have potentially crashed if a driver had
neither implementation, and userspace tried to use it despite
not being advertised as supported.
Cc: stable@vger.kernel.org
Fixes: 4a4b816950 ("cfg80211: Accept multiple RSSI thresholds for CQM")
Fixes: 37c20b2eff ("wifi: cfg80211: fix cqm_config access race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes WARN_ONs when using AP_VLANs after station removal. The flush
call passed AP_VLAN vif to driver, but because these vifs are virtual and
not registered with drivers, we need to translate to the correct AP vif
first.
Closes: https://github.com/openwrt/openwrt/issues/12420
Fixes: 0b75a1b1e4 ("wifi: mac80211: flush queues on STA removal")
Fixes: d00800a289 ("wifi: mac80211: add flush_sta method")
Tested-by: Konstantin Demin <rockdrilla@gmail.com>
Tested-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
Link: https://lore.kernel.org/r/20231104141333.3710-1-oldium.pro@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Fill it in for the modules I maintain.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses a helper function for assignment of xdp_features.
This change simplifies backports.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1698430011-21562-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is basically a followup to commit 4e4b1798cc ("vxlan: Add
missing entries to vxlan_get_size()"). All of the attributes in
vxlan_get_size() appear in the same order that they are filled in
vxlan_fill_info() except for IFLA_VXLAN_PORT_RANGE. For consistency, move
that entry to match its order and add a comment, like for all other
entries.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20231027184410.236671-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
Intel Wired LAN Driver Updates for 2023-10-23 (iavf)
This series includes iAVF driver cleanups from Michal Schmidt.
Michal removes and updates stale comments, fixes some locking anti-patterns,
improves handling of resets when the PF is slow, avoids unnecessary
duplication of netdev state, refactors away some duplicate code, and finally
removes the never-actually-used client interface.
Changes since v1:
* Dropped patch ("iavf: in iavf_down, disable queues when removing the
driver") which was applied directly to net.
* Fixed a merge conflict due to 7db3111043 ("iavf: initialize waitqueues
before starting watchdog_task").
V1 was originally posted at:
https://lore.kernel.org/netdev/20231027104109.4f536f51@kernel.org/T/#mfadbdb39313eeccc616fdee80a4fdd6bda7e2822
====================
Link: https://lore.kernel.org/r/20231027175941.1340255-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The iavf client interface was added in 2017 by commit ed0e894de7
("i40evf: add client interface"), but there have never been any in-tree
callers.
It's not useful for future development either. The Intel out-of-tree
iavf and irdma drivers instead use an auxiliary bus, which is a better
solution.
Remove the iavf client interface code. Also gone are the client_task
work and the client_lock mutex.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-9-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new function iavf_free_interrupt_scheme that does the inverse of
iavf_init_interrupt_scheme. Symmetry is nice. And there will be three
callers already.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-8-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use unregister_netdev, which takes rtnl_lock for us. We don't have to
check the reg_state under rtnl_lock. There's nothing to race with. We
have just cancelled the finish_config work.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-7-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The information whether a netdev has been registered is already present
in the netdev itself. There's no need for a driver flag with the same
meaning.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-6-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Every time I create VFs on ice, I receive at least one "Device is still
in reset (-16), retrying" message per VF. It recovers fine, but typical
usecases should not trigger scary-looking messages.
The waiting for reset is too short. It makes no sense to check every 10
microseconds. Typical reset waiting times are at least tens of
milliseconds and can be several seconds. I suspect the polling interval
was meant to be 10 milliseconds all along.
IAVF_RESET_WAIT_COMPLETE_COUNT is defined as 2000, so the total waiting
time could be over 20 seconds. I have seen resets take 5 seconds (with
128 VFs on ice).
The added benefit of not triggering the "Device is still in reset" path
is that we avoid going through the __IAVF_INIT_FAILED state, which would
take a full second before retrying.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-5-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reason for queueing watchdog_task is to have it process the
aq_required flags that are being set here. If comms failed, there's
nothing to do, so return early.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This pattern appears in two places in the iavf source code:
while (!mutex_trylock(...))
usleep_range(...);
That's just mutex_lock with extra steps.
The pattern is a leftover from when iavf used bit flags instead of
mutexes for locking. Commit 5ac49f3c27 ("iavf: use mutexes for locking
of critical sections") replaced test_and_set_bit with !mutex_trylock,
preserving the pattern.
Simplify it to mutex_lock.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bit lock __IAVF_IN_CRITICAL_TASK does not exist anymore since commit
5ac49f3c27 ("iavf: use mutexes for locking of critical sections").
Adjust the comments accordingly.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231027175941.1340255-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
allow specifying cmd-cnt-name and cmd-max-name in netlink specs, in
accordance with Documentation/userspace-api/netlink/c-code-gen.rst.
Use cmd-cnt-name and attr-cnt-name in the mptcp yaml spec and in the
corresponding uAPI headers, to preserve the #defines we had in the past
and avoid adding new ones.
v2:
- squash modification in mptcp.yaml and MPTCP uAPI headers
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/12d4ed0116d8883cf4b533b856f3125a34e56749.1698415310.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the kernel sends message back containing attribute not defined
in family spec, following exception is raised to the user:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do trap-get --json '{"bus-name": "netdevsim", "dev-name": "netdevsim1", "trap-name": "source_mac_is_multicast"}'
Traceback (most recent call last):
File "/home/jiri/work/linux/tools/net/ynl/lib/ynl.py", line 521, in _decode
attr_spec = attr_space.attrs_by_val[attr.type]
~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^
KeyError: 132
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/jiri/work/linux/./tools/net/ynl/cli.py", line 61, in <module>
main()
File "/home/jiri/work/linux/./tools/net/ynl/cli.py", line 49, in main
reply = ynl.do(args.do, attrs, args.flags)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/jiri/work/linux/tools/net/ynl/lib/ynl.py", line 731, in do
return self._op(method, vals, flags)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/jiri/work/linux/tools/net/ynl/lib/ynl.py", line 719, in _op
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/jiri/work/linux/tools/net/ynl/lib/ynl.py", line 525, in _decode
raise Exception(f"Space '{space}' has no attribute with value '{attr.type}'")
Exception: Space 'devlink' has no attribute with value '132'
Introduce a command line option "process-unknown" and pass it down to
YnlFamily class constructor to allow user to process unknown
attributes and types and print them as binaries.
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do trap-get --json '{"bus-name": "netdevsim", "dev-name": "netdevsim1", "trap-name": "source_mac_is_multicast"}' --process-unknown
{'UnknownAttr(129)': {'UnknownAttr(0)': b'\x00\x00\x00\x00\x00\x00\x00\x00',
'UnknownAttr(1)': b'\x00\x00\x00\x00\x00\x00\x00\x00',
'UnknownAttr(2)': b'\x0e\x00\x00\x00\x00\x00\x00\x00'},
'UnknownAttr(132)': b'\x00',
'UnknownAttr(133)': b'',
'UnknownAttr(134)': {'UnknownAttr(0)': b''},
'bus-name': 'netdevsim',
'dev-name': 'netdevsim1',
'trap-action': 'drop',
'trap-group-name': 'l2_drops',
'trap-name': 'source_mac_is_multicast'}
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231027092525.956172-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both ipvlan_process_v4_outbound() and ipvlan_process_v6_outbound()
increment dev->stats.tx_errors in case of errors.
Unfortunately there are two issues :
1) ipvlan_get_stats64() does not propagate dev->stats.tx_errors to user.
2) Increments are not atomic. KCSAN would complain eventually.
Use DEV_STATS_INC() to not miss an update, and change ipvlan_get_stats64()
to copy the value back to user.
Fixes: 2ad7bf3638 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Link: https://lore.kernel.org/r/20231026131446.3933175-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Like other buses, devices on the netdevsim bus have a release callback
that is invoked when the reference count of the device drops to zero.
However, unlike other buses such as PCI, the release callback is not
necessarily built into the kernel, as netdevsim can be built as a
module.
The above is problematic as nothing prevents the module from being
unloaded before the release callback has been invoked, which can happen
asynchronously. One such example can be found in commit a380687200
("devlink: take device reference for devlink object") where devlink
calls put_device() from an RCU callback.
The issue is not theoretical and the reproducer in [1] can reliably
crash the kernel. The conclusion of this discussion was that the issue
should be solved in netdevsim, which is what this patch is trying to do.
Add a reference count that is increased when a device is added to the
bus and decreased when a device is released. Signal a completion when
the reference count drops to zero and wait for the completion when
unloading the module so that the module will not be unloaded before all
the devices were released. The reference count is initialized to one so
that completion is only signaled when unloading the module.
With this patch, the reproducer in [1] no longer crashes the kernel.
[1] https://lore.kernel.org/netdev/20230619125015.1541143-2-idosch@nvidia.com/
Fixes: a380687200 ("devlink: take device reference for devlink object")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231026083343.890689-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The napi_build_skb() can reuse the skb in skb cache per CPU or
can allocate skbs in bulk, which helps improve the performance.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231026080058.22810-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a spelling mistake in a dev_dbg message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/all/20231026065408.1087824-1-colin.i.king@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
net: dsa: microchip: provide Wake on LAN support (part 2)
This patch series introduces extensive Wake on LAN (WoL) support for the
Microchip KSZ9477 family of switches, coupled with some code refactoring
and error handling enhancements. The principal aim is to enable and
manage Wake on Magic Packet and other PHY event triggers for waking up
the system, whilst ensuring that the switch isn't reset during a
shutdown if WoL is active.
The Wake on LAN functionality is optional and is particularly beneficial
if the PME pins are connected to the SoC as a wake source or to a PMIC
that can enable or wake the SoC.
====================
Link: https://lore.kernel.org/r/20231026051051.2316937-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensures a stable PME (Power Management Event) pin state by disabling PME
on system start and enabling it on shutdown only if WoL (Wake-on-LAN) is
configured. This is needed to avoid issues with some PMICs (Power
Management ICs).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231026051051.2316937-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Centralize the switch shutdown routine in a dedicated function,
ksz_switch_shutdown(), to enhance code maintainability and reduce
redundancy. This change abstracts the common shutdown operations
previously duplicated in ksz9477_i2c_shutdown() and ksz_spi_shutdown().
This refactoring is a preparatory step for an upcoming patch to avoid
reset on shutdown if Wake-on-LAN (WoL) is enabled.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231026051051.2316937-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance the ksz_switch_macaddr_get() function to handle errors that may
occur during the call to ksz_write8(). Specifically, this update checks
the return value of ksz_write8(), which may fail if regmap ranges
validation is not passed and returns the error code.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231026051051.2316937-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce Wake on Magic Packet (WoL) functionality to the ksz9477
driver.
Major changes include:
1. Extending the `ksz9477_handle_wake_reason` function to identify Magic
Packet wake events alongside existing wake reasons.
2. Updating the `ksz9477_get_wol` and `ksz9477_set_wol` functions to
handle WAKE_MAGIC alongside the existing WAKE_PHY option, and to
program the switch's MAC address register accordingly when Magic
Packet wake-up is enabled. This change will prevent WAKE_MAGIC
activation if the related port has a different MAC address compared
to a MAC address already used by HSR or an already active WAKE_MAGIC
on another port.
3. Adding a restriction in `ksz_port_set_mac_address` to prevent MAC
address changes on ports with active Wake on Magic Packet, as the
switch's MAC address register is utilized for this feature.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231026051051.2316937-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 97154bcf4d ("af_unix: Kconfig: make CONFIG_UNIX bool"),
af_unix.c is no longer built as module.
Let's remove unnecessary #if condition, exitcall, and module macros.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231026212305.45545-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mat Martineau says:
====================
mptcp: Fixes and cleanup for v6.7
This series includes three initial patches that we had queued in our
mptcp-net branch, but given the likely timing of net/net-next syncs this
week, the need to avoid introducing branch conflicts, and another batch
of net-next patches pending in the mptcp tree, the most practical route
is to send everything for net-next.
Patches 1 & 2 fix some intermittent selftest failures by adjusting timing.
Patch 3 removes an unneccessary userspace path manager restriction on
the removal of subflows with subflow ID 0.
The remainder of the patches are all cleanup or selftest changes:
Patches 4-8 clean up kernel code by removing unused parameters, making
more consistent use of existing helper functions, and reducing extra
casting of socket pointers.
Patch 9 removes an unused variable in a selftest script.
Patch 10 adds a little more detail to some mptcp_join test output.
====================
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-0-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just like displaying "invert" after "Info: ", "simult" should be
displayed too when rm_subflow_nr doesn't match the expect value in
chk_rm_nr():
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
rm [ ok ]
rmsf [ ok ] 3 in [2:4]
Info: invert simult
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
rm [ ok ]
rmsf [ ok ]
Info: invert
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-10-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Global var mptcp_connect defined at the front of mptcp_sockopt.sh is
duplicate with local var mptcp_connect defined in do_transfer(), drop
this useless global one.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-9-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'(struct sock *)msk' is used several times in mptcp_nl_cmd_announce(),
mptcp_nl_cmd_remove() or mptcp_userspace_pm_set_flags() in pm_userspace.c,
it's worth adding a local variable sk to point it.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-8-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we move the sk assignment statement ahead in mptcp_nl_cmd_sf_create()
or mptcp_nl_cmd_sf_destroy(), right after the msk null-check statements,
sk can be used after the create_err or destroy_err labels instead of
open-coding it again.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-7-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use mptcp_get_ext() helper defined in protocol.h instead of open-coding
it in mptcp_sendmsg_frag().
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-6-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use __mptcp_check_fallback() helper defined in net/mptcp/protocol.h,
instead of open-coding it in both __mptcp_do_fallback() and
mptcp_diag_fill_info().
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-5-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code using 'ssk' parameter of mptcp_pm_subflow_check_next() has been
dropped in commit "95d686517884 (mptcp: fix subflow accounting on close)".
So drop this useless parameter ssk.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-4-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the ability to send RM_ADDR for local ID 0. Check
whether id 0 address is removed, if not, put id 0 into a removing
list, pass it to mptcp_pm_remove_addr() to remove id 0 address.
There is no reason not to allow the userspace to remove the initial
address (ID 0). This special case was not taken into account not
letting the userspace to delete all addresses as announced.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/379
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-3-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second input parameter of 'wait_rm_addr/sf $1 1' is misused. If it's
1, wait_rm_addr/sf will never break, and will loop ten times, then
'wait_rm_addr/sf' equals to 'sleep 1'. This delay time is too long,
which can sometimes make the tests fail.
A better way to use wait_rm_addr/sf is to use rm_addr/sf_count to obtain
the current value, and then pass into wait_rm_addr/sf.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-2-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some userspace pm tests failed are reported by CI:
112 userspace pm add & remove address
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
mptcp_info subflows=1:1 [ ok ]
subflows_total 2:2 [ ok ]
mptcp_info add_addr_signal=1:1 [ ok ]
rm [ ok ]
rmsf [ ok ]
Info: invert
mptcp_info subflows=0:0 [ ok ]
subflows_total 1:1 [fail]
got subflows 0:0 expected 1:1
Server ns stats
TcpPassiveOpens 2 0.0
TcpInSegs 118 0.0
This patch fixes them by changing 'speed' to 5 to run the tests much more
slowly.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-1-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During a W=1 build GCC 13.2 says:
net/core/selftests.c: In function ‘net_selftest_get_strings’:
net/core/selftests.c:404:52: error: ‘%s’ directive output may be truncated writing up to 279 bytes into a region of size 28 [-Werror=format-truncation=]
404 | snprintf(p, ETH_GSTRING_LEN, "%2d. %s", i + 1,
| ^~
net/core/selftests.c:404:17: note: ‘snprintf’ output between 5 and 284 bytes into a destination of size 32
404 | snprintf(p, ETH_GSTRING_LEN, "%2d. %s", i + 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
405 | net_selftests[i].name);
| ~~~~~~~~~~~~~~~~~~~~~~
avoid it by using ethtool_sprintf().
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231026022916.566661-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fill in bridge's module description.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
