mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 21:38:32 +08:00
0db117359e
1180373 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Marco Morandini
|
0db117359e |
HID: add quirk for 03f0:464a HP Elite Presenter Mouse
HP Elite Presenter Mouse HID Record Descriptor shows two mouses (Repord ID 0x1 and 0x2), one keypad (Report ID 0x5), two Consumer Controls (Report IDs 0x6 and 0x3). Previous to this commit it registers one mouse, one keypad and one Consumer Control, and it was usable only as a digitl laser pointer (one of the two mouses). This patch defines the 464a USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, allowing to use the device both as a mouse and a digital laser pointer. Signed-off-by: Marco Morandini <marco.morandini@polimi.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
stuarthayhurst
|
48aea8b445 |
HID: logitech-hidpp: Add USB and Bluetooth IDs for the Logitech G915 TKL Keyboard
Adds the USB and Bluetooth IDs for the Logitech G915 TKL keyboard, for device detection For this device, this provides battery reporting on top of hid-generic Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Siarhei Vishniakou
|
f5554725f3 |
HID: microsoft: Add rumble support to latest xbox controllers
Currently, rumble is only supported via bluetooth on a single xbox controller, called 'model 1708'. On the back of the device, it's named 'wireless controller for xbox one'. However, in 2021, Microsoft released a firmware update for this controller. As part of this update, the HID descriptor of the device changed. The product ID was also changed from 0x02fd to 0x0b20. On this controller, rumble was supported via hid-microsoft, which matched against the old product id (0x02fd). As a result, the firmware update broke rumble support on this controller. See: https://news.xbox.com/en-us/2021/09/08/xbox-controller-firmware-update-rolling-out-to-insiders-starting-today/ The hid-microsoft driver actually supports rumble on the new firmware, as well. So simply adding new product id is sufficient to bring back this support. After discussing further with the xbox team, it was pointed out that another xbox controller, xbox elite series 2, can be supported in a similar way. Add rumble support for all of these devices in this patch. Two of the devices have received firmware updates that caused their product id's to change. Both old and new firmware versions of these devices were tested. The tested controllers are: 1. 'wireless controller for xbox one', model 1708 2. 'xbox wireless controller', model 1914. This is also sometimes referred to as 'xbox series S|X'. 3. 'elite series 2', model 1797. The tested configurations are: 1. model 1708, pid 0x02fd (old firmware) 2. model 1708, pid 0x0b20 (new firmware) 3. model 1914, pid 0x0b13 4. model 1797, pid 0x0b05 (old firmware) 5. model 1797, pid 0x0b22 (new firmware) I verified rumble support on both bluetooth and usb. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Siarhei Vishniakou <svv@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Benjamin Tissoires
|
7c28afd551 |
HID: hidpp: terminate retry loop on success
It seems we forgot the normal case to terminate the retry loop,
making us asking 3 times each command, which is probably a little bit
too much.
And remove the ugly "goto exit" that can be replaced by a simpler "break"
Fixes:
|
||
Bastien Nocera
|
6199d23c91 |
HID: logitech-hidpp: Handle timeout differently from busy
If an attempt at contacting a receiver or a device fails because the receiver or device never responds, don't restart the communication, only restart it if the receiver or device answers that it's busy, as originally intended. This was the behaviour on communication timeout before commit |
||
Denis Arefev
|
16a9c24f24 |
HID: wacom: Add error check to wacom_parse_and_register()
Added a variable check and transition in case of an error Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Denis Arefev <arefev@swemel.ru> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Sung-Chi Li
|
ed84c4517a |
HID: google: add jewel USB id
Add 1 additional hammer-like device. Signed-off-by: Sung-Chi Li <lschyi@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Nikita Zhandarovich
|
bd249b9197 |
HID: wacom: avoid integer overflow in wacom_intuos_inout()
If high bit is set to 1 in ((data[3] & 0x0f << 28), after all arithmetic
operations and integer promotions are done, high bits in
wacom->serial[idx] will be filled with 1s as well.
Avoid this, albeit unlikely, issue by specifying left operand's __u64
type for the right operand.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes:
|
||
Jason Gerecke
|
d9eef346b6 |
HID: wacom: Check for string overflow from strscpy calls
The strscpy function is able to return an error code when a copy would overflow the size of the destination. The copy is stopped and the buffer terminated before overflow actually occurs so it is safe to continue execution, but we should still produce a warning should this occur. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Linus Torvalds
|
34da76dca4 |
for-linus-2023042601
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZEmThqZi849r7WBJAQLKTxAAwLKvk8xCUVPardg2tYxLSaNJAeSgo4L0 CKgB52kXa5R6+L3OApKgkREkj0TotNpNA5Gc/1DlPiRrUXPAj7g+NS2ID8SfXOUd Iii42DoVZli03kG2xoLgU9Fy7mJ1JdfCC6dhP95y6oDzsZqb87M8sk+2G59KVhXO KXaVMSU68+AKdXwDCbxhDwR+CH0YpGUqZxURKYycIZQhWPCssBDHorqJLLHzodSx jk+OKAqTAURjt3Pqqn6BwyOXmjhsomUfJ2z01i/I062+zFTjy+6RBhqqbOPBpJ0w D34nDwunyhlha11u1dJoP2lpmujJvliTUPM0ddeZTTMbRf58LzpxtVBPSsy389uI pqC14OdUDEvlp4WX4Xkj7K2m4HpE9hYL1gF2ebnwvyS2f1Sjti1mKSYvs/cJk5nY nlivD7lmj4Cc0SDasyfqnkP9TUxF+1SNoDAImtku/ajtIGsguveU8kYZtZxKj3WO A0LZKabKH/jEvJug/aQA0l5+AdP88mGLre+WYc6xh7IxTlsXnYeLpaYOdGZ19WCQ tjpc+z+nPSszc0wQs2TsJSxQpkzcO+8qS+h9GFhBm5DREfVHR8wrsMrdxot55zvm +j9sMN8oD7RQwxtG9DUF2wzIyjKe/k9b3qbe/BApC65WsMiXdSvlhJKhvNZQs+w3 1OGeT5LJpqc= =JhWj -----END PGP SIGNATURE----- Merge tag 'for-linus-2023042601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - import a bunch of HID selftests from out-of-tree hid-tools project (Benjamin Tissoires) - drastically reducing Bluetooth disconnects on hid-nintendo driven devices (Daniel J. Ogorchock) - lazy initialization of battery interfaces in wacom driver (Jason Gerecke) - generic support for all Kye tablets (David Yang) - proper rumble queue overrun handling in hid-nintendo (Daniel J. Ogorchock) - support for ADC measurement in logitech-hidpp driver (Bastien Nocera) - reset GPIO support in i2c-hid (Hans de Goede) - improved handling of generic "Digitizer" usage (Jason Gerecke) - support for KEY_CAMERA_FOCUS (Feng Qi) - quirks for Apple Geyser 3 and Apple Geyser 4 (Alex Henrie) - assorted functional fixes and device ID additions * tag 'for-linus-2023042601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits) HID: amd_sfh: Fix max supported HID devices HID: wacom: generic: Set battery quirk only when we see battery data HID: wacom: Lazy-init batteries HID: Ignore battery for ELAN touchscreen on ROG Flow X13 GV301RA HID: asus: explicitly include linux/leds.h HID: lg-g15: explicitly include linux/leds.h HID: steelseries: explicitly include linux/leds.h HID: apple: Set the tilde quirk flag on the Geyser 3 HID: apple: explicitly include linux/leds.h HID: mcp2221: fix get and get_direction for gpio HID: mcp2221: fix report layout for gpio get HID: wacom: Set a default resolution for older tablets HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms HID: i2c-hid-of: Consistenly use dev local variable in probe() HID: kye: Fix rdesc for kye tablets HID: amd_sfh: Support for additional light sensor HID: amd_sfh: Handle "no sensors" enabled for SFH1.1 HID: amd_sfh: Increase sensor command timeout for SFH1.1 HID: amd_sfh: Correct the stop all command ... |
||
|
Linus Torvalds
|
725a345b2e |
fbdev updates for kernel 6.4-rc1:
- vt_buffer.h: Fix build on alpha (Randy Dunlap)
- mmp: Clock handling fix (Christophe JAILLET)
- 68328fb, ps3fb, vfb: Init .owner field of struct fb_ops (Thomas Zimmermann)
- fbdev: cg14: Convert to platform remove callback returning void
- Preparation patches to convert drivers to return void in .remove() callback
(Uwe Kleine-König)
- Drop Paul Mackerras as rage128 maintainer
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZElt5AAKCRD3ErUQojoP
X1vWAQDGK0UQZJ2laQAkt9tULDwUs2ISIV6ujCJPRjBbg5GwLQEAkLrLZRap3QkL
ic8dZPDnUNf3Ho9RbSjJIKge+zUHSgY=
=D9Ln
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Nothing really exiting in here.
The majority of lines changed is due to Uwe's preparation patches to
change the return value of the .remove() callback to void.
Summary:
- vt_buffer.h: Fix build on alpha (Randy Dunlap)
- mmp: Clock handling fix (Christophe JAILLET)
- 68328fb, ps3fb, vfb: Init .owner field of struct fb_ops (Thomas
Zimmermann)
- fbdev: cg14: Convert to platform remove callback returning void
- Preparation patches to convert drivers to return void in .remove()
callback (Uwe Kleine-König)
- Drop Paul Mackerras as rage128 maintainer"
* tag 'fbdev-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (51 commits)
MAINTAINERS: Remove rage128 framebuffer driver maintainer
fbdev: vfb: Init owner field of struct fb_ops
fbdev: ps3fb: Init owner field of struct fb_ops
fbdev: 68328fb: Init owner field of struct fb_ops
fbdev: mmp: Fix deferred clk handling in mmphw_probe()
linux/vt_buffer.h: allow either builtin or modular for macros
fbdev: xilinxfb: Convert to platform remove callback returning void
fbdev: wmt_ge_rops: Convert to platform remove callback returning void
fbdev: wm8505fb: Convert to platform remove callback returning void
fbdev: vt8500lcdfb: Convert to platform remove callback returning void
fbdev: via: Convert to platform remove callback returning void
fbdev: vga16fb: Convert to platform remove callback returning void
fbdev: vfb: Convert to platform remove callback returning void
fbdev: vesafb: Convert to platform remove callback returning void
fbdev: uvesafb: Convert to platform remove callback returning void
fbdev: tcx: Convert to platform remove callback returning void
fbdev: sm501fb: Convert to platform remove callback returning void
fbdev: simplefb: Convert to platform remove callback returning void
fbdev: sh_mobile_lcdcfb: Convert to platform remove callback returning void
fbdev: sh7760fb: Convert to platform remove callback returning void
...
|
||
|
Linus Torvalds
|
89555eebb9 |
Mostly fixes for DTs or DT handling this time. And a few driver
bugfixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmRJbVEACgkQFA3kzBSg KbbdYw//X3EgB3aeSAWTrBBs0PPwJbwadf053hWrn6+8rqx2SO8mM521QvotYIsG CLxOymWFNCDiPfCMgwMYCrDzfcpRgg5ywvsGO4yCr4UxZdkgFyrn1o4Whf/YHNjG 8KBrEbTKHkUY/S4xaaulixd5vA8+wiyVMQVTa7EUXfWoJvcJG5PvOVebyw+ys2DX krbqGPO/MYJv/0AHHLJc2OpUQQc/r9oqUXzbq/dCKzey00h/HgwAUFu0V+2dxJl8 3bz+oFbMvzNW+saGxd2tLE1oldpvGyBRKwQBs3VZtEMIxU46PyHhirqkqoK3lK4M kM9CMpWwTe3MaqdrmV9ShmNuhSRowH6q9lAZ8XFnyHHbC7Wc1uRUWvaEfvvpD5nQ HGGzNQjXXbV72R1Y51mGGU1stdpjGMvjhJAyvre3gMru/TsBC90GF3Os1r//hDgz /THbTET2Jq1bMB6sXOQhQznABJXEumUMAwo33EyEb2jgLEe9qtecyE79MGNhYSY7 q3EoWpDLpQk8UMZGZmOV6QAg2n0PhfRdHaiUuCO5uIqsOc1PdyrEeqYlj7jABXPq lpYThU2+RQ3xmGAyF2SYXtIE87SDldw6JPRQ8E+Sv2iov2QOzrnGlx7syLPorQpV mhWDfC5UyYoHnRYAUafv9pr8BPltBuQSCVocX9rYOqAxu01eBAw= =JT3e -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Mostly fixes for DTs or DT handling this time. And a few driver bugfixes" * tag 'i2c-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits) i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path i2c: omap: Improve error reporting for problems during .remove() i2c: cadence: Add reset controller support dt-bindings: i2c: cadence: Document `resets` property i2c: mediatek: add support for MT7981 SoC dt-bindings: i2c: i2c-mt65xx: add MediaTek MT7981 SoC dt-bindings: i2c: Drop unneeded quotes i2c: brcmstb: use devm_platform_ioremap_resource_byname() i2c: cadence: Detect maximum transfer size i2c: cadence: Allow to specify the FIFO depth dt-bindings: i2c: cadence: Document `fifo-depth` property i2c: xiic: Use devm_platform_get_and_ioremap_resource() i2c: mpc: Use i2c-scl-clk-low-timeout-us i2c property i2c: mpc: Use of_property_read_u32 instead of of_get_property dt-bindings: i2c: mpc: Mark "fsl,timeout" as deprecated i2c: xiic: hide OF related data for COMPILE_TEST i2c: synquacer: mark OF related data as maybe unused dt-bindings: i2c: i2c-mt65xx: Add compatible for MT6795 Helio X10 i2c: imx: Simplify using devm_clk_get_enabled() ... |
||
|
Linus Torvalds
|
d91f6a7307 |
Minor bug fixes for the IPMI driver
There was a bug in the SSIF driver where in certain conditions it could stop working. Outside of that: spelling fixes, removing some dead code, re-adding a missing statistic increment, and removal of register_sysctl_table(). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmRJaIgACgkQYfOMkJGb /4HevA/8CXY3MQ3cP3hTh52wTWc3zS6RJwxIlkKv2ByORvEDmMKjZfsCPJuH8/T0 FSa2hA7vBXBnDu7MZPfPNWMxNcemLME3H+qeBcgWfS26M/vUcGLSVJdQi9ZJyb8b KqF4IXEYreNvjjqLWzx9PQIlrA1S1Ej8wKamQfPYuR4QhtywZ+4ZiHHSUxNT2+Ku 0N81qCmTVPe2knHp8jw89iqqWwSlc3eYrf2hNdsWPgXH1Hu3eLoWmh2l9qnanTDb DyJfier9Y/ztGn11zRxbKTPyCcp07+NwnlV/411pnI7Try2NIu8uzVcVddzZa6JG TkACKmBW3qNW/4jAaycJQBbYjT0O1MR/ADmIjno10PJ6sy/4n9FUtsyNxRdEefjl pKH3TgBiwd9dYDl9OV+wmMGa2PC9jdga++oM6Bw/XLRw3N162HWEurTOo0Y6MsvE 1VuAQt0jwjAARvEqCvqev57lTKrcyUPzUH614i0Q2pAs7gI3kjTALrlUiUNhwI79 phpaTSx01pMCv33MyLRNEyT54CqjaZyye3S0UIN6vGJey0U1Qg5+4KWJ2zo6tTWM UQfSYa488y1solehMlYzWmMOXvgNnRQ5Ok8oPwxokH45mkkyl6p5/q8doogkMERv yW5ZPXve9R1JF4dQZCMO8mdyC5tRiy/cebuAeR8q3Vfdk/ejARo= =ZavT -----END PGP SIGNATURE----- Merge tag 'for-linus-6.4-1' of https://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "Minor bug fixes for the IPMI driver There was a bug in the SSIF driver where in certain conditions it could stop working. Outside of that: spelling fixes, removing some dead code, re-adding a missing statistic increment, and removal of register_sysctl_table()" * tag 'for-linus-6.4-1' of https://github.com/cminyard/linux-ipmi: ipmi:ssif: Drop if blocks with always false condition ipmi: fix SSIF not responding under certain cond. ipmi:ssif: Add send_retries increment char:ipmi:Fix spelling mistake "asychronously" -> "asynchronously" ipmi: simplify sysctl registration ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it |
||
|
Linus Torvalds
|
fc2e58b8b7 |
spi: Updates for v6.4
A fairly standard release for SPI with the exception of a change to the
API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily for
a while. There's also a new API to allow us to TPM chips on half duplex
controllers.
There's three commits in here that were mangled by a bad interaction
between the alsa-devel mailing list software and b4, I didn't notice
until there were merges on top with it being SPI not ALSA. It seemed
clear enough to not be worth going back and fixing.
- Refactoring in preparation for supporting multiple chip selects for a
single device, needed by some flash devices, which required a change
in the SPI device API visible throughout the tree.
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI.
- Optimisation for large transfers on fsl-cpm devices.
- Cleanups around device property use which fix some sisues with
fwnode.
- Use of both void remove() and devm_platform_.*ioremap_resource().
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI.
The final commit converting to DEV_PM_OPS() was applied late to fix a
warning that was introduced by some of the earlier work.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRIFQgACgkQJNaLcl1U
h9BJOwf+JF2RySdn5g1LsyTndPZhLfw4iJgTHaMlnv5tiPHvYVYMM/mNMbMr5Znh
Y2T0OUkzuRfOK273C+hItC1bTYFTa2cEbDb5dpmKBOZdQ3hjGsZQBvuH2bScUQ+a
H7UgD3FYOJST6k6rRgZQxVMPePFrXAOaO1gmFWTR3v1EcEr2JeQnjZsmymFXcTnc
CtPg9N3RvhVnq5aXuxSgQeyyKIjo4LJh/eZ2mexPIu0DeUq3MftaWwSwCXFIoeNC
DMLA4mZWTgf/yt6JUALwLr+bIiJjb4qGjp3xGZ2wmX7zn73f9QQvuunKb1V4zbNF
EdXLo2VjA9cZjsihenBaKeHnkfgNfA==
=IRqY
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
|
||
|
Linus Torvalds
|
1c15ca4e4e |
sound updates for 6.4-rc1
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
|
||
|
Linus Torvalds
|
34b62f186d |
pci-v6.4-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmRIKooUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vxq7A/9G0sInrqvqH2I9/Set/FnmMfCtGDH
YcEjHYYxL+pztSiXTavDV+ib9iaut83oYtcV9p1bUMhJoZdKNZhrNdIGzRFSemI4
0/ShtklPzNEu6nPPL24CnEzgbrODBU56ZvzrIE/tShEoOjkKa1triBnOA/JMxYTL
cUwqDQlDkdpYniCgxy05QfcFZ0mmSOkbl7runGfTMTiUKKC3xSRiaW5YN9KZe3i7
G5YHu1VVCjeQdQSICHYwyFmkyiqosCoajQNp1IHBkWqSwilzyZMg0NWJobVSA7M/
mXXnzLtFcC60oT58/9MaggQwDTaSGDE8mG+sWv05bB2u5TQVyZEZqZ4c2FzmZIZT
WLZYLB6PFRW0zePEuMnVkSLS2npkX+aGaBv28bf88sjorpaYNG01uYijnLEceolQ
yBPFRN3bsRuOyHvYY/tiZX/BP7z/DS++XXwA8zQWZnYsXSlncJdwCNquV0xIwUt+
hij4/Yu7o9SgV1LbuwtkMFAn3C9Szc65Eer+IvRRdnMZYphjVHbA5F2msRFyiCeR
HxECtMQ1jBnVrpQAcBX1Sz+Vu5MrwCqzc2n6tvTQHDvVNjXfkG3NaFhxYPc1IL9Z
NJMeCKfK1qzw7TtbvWXCluTTIM9N/bNJXrJhQbjNY7V6IaBZY1QNYW0ZFfGgj6Gb
UUPgndidRy4/hzw=
=HPXl
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
|
||
|
Linus Torvalds
|
cb6fe2ceb6 |
Devicetree updates for v6.4, part 2:
- First part of DT header detangling dropping cpu.h from of_device.h and replacing some includes with forward declarations. A handful of drivers needed some adjustment to their includes as a result. - Refactor of_device.h to be used by bus drivers rather than various device drivers. This moves non-bus related functions out of of_device.h. The end goal is for of_platform.h and of_device.h to stop including each other. - Refactor open coded parsing of "ranges" in some bus drivers to use DT address parsing functions - Add some new address parsing functions of_property_read_reg(), of_range_count(), and of_range_to_resource() in preparation to convert more open coded parsing of DT addresses to use them. - Treewide clean-ups to use of_property_read_bool() and of_property_present() as appropriate. The ones here are the ones that didn't get picked up elsewhere. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmRIOrkACgkQ+vtdtY28 YcN9WA//R+QrmSPExhfgio5y+aOJDWucqnAcyAusPctLcF7h7j0CdzpwaSRkdaH4 KiLjeyt6tKn8wt8w7m/+SmCsSYXPn81GH/Y5I2F40x6QMrY3cVOXUsulKQA+6ZjZ PmW3bMcz0Dw9IhUK3R/WX96+9UdoytKg5qoTzNzPTKpvKA1yHa/ogl2FnHJS5W+8 Rxz+1oJ70VMIWGpBOc0acHuB2S0RHZ46kPKkPTBgFYEwtmJ8qobvV3r3uQapNaIP 2jnamPu0tAaQoSaJKKSulToziT+sd1sNB+9oyu/kP+t3PXzq4qwp2Gr4jzUYKs4A ZF3DPhMR3YLLN41g/L3rtB0T/YIS287sZRuaLhCqldNpRerSDk4b0HRAksGk1XrI HqYXjWPbRxqYiIUWkInfregSTYJfGPxeLfLKrawNO34/eEV4JrkSKy8d0AJn04EK jTRqI3L7o23ZPxs29uH/3+KK90J3emPZkF7GWVJTEAMsM8jYZduGh7EpsttJLaz/ QnxbTBm9295ahIdCfo/OQhqjWnaNhpbTzf31pyrBZ/itXV7gQ0xjwqPwiyFwI+o/ F/r81xqdwQ3Ni8MKt2c7zLyVA95JHPe95KQ3GrDXR68aByJr4RuhKG8Y2Pj1VOb3 V+Hsu5uhwKrK7Yqe+rHDnJBO00OCO8nwbWhMy2xVxoTkSFCjDmo= =89Zj -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more devicetree updates from Rob Herring: - First part of DT header detangling dropping cpu.h from of_device.h and replacing some includes with forward declarations. A handful of drivers needed some adjustment to their includes as a result. - Refactor of_device.h to be used by bus drivers rather than various device drivers. This moves non-bus related functions out of of_device.h. The end goal is for of_platform.h and of_device.h to stop including each other. - Refactor open coded parsing of "ranges" in some bus drivers to use DT address parsing functions - Add some new address parsing functions of_property_read_reg(), of_range_count(), and of_range_to_resource() in preparation to convert more open coded parsing of DT addresses to use them. - Treewide clean-ups to use of_property_read_bool() and of_property_present() as appropriate. The ones here are the ones that didn't get picked up elsewhere. * tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits) bus: tegra-gmi: Replace of_platform.h with explicit includes hte: Use of_property_present() for testing DT property presence w1: w1-gpio: Use of_property_read_bool() for boolean properties virt: fsl: Use of_property_present() for testing DT property presence soc: fsl: Use of_property_present() for testing DT property presence sbus: display7seg: Use of_property_read_bool() for boolean properties sparc: Use of_property_read_bool() for boolean properties sparc: Use of_property_present() for testing DT property presence bus: mvebu-mbus: Remove open coded "ranges" parsing of/address: Add of_property_read_reg() helper of/address: Add of_range_count() helper of/address: Add support for 3 address cell bus of/address: Add of_range_to_resource() helper of: unittest: Add bus address range parsing tests of: Drop cpu.h include from of_device.h OPP: Adjust includes to remove of_device.h irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h cpuidle: Adjust includes to remove of_device.h cpufreq: sun50i: Add explicit include for cpu.h cpufreq: Adjust includes to remove of_device.h ... |
||
|
Linus Torvalds
|
d42b1c4757 |
Devicetree updates for v6.4, part 1:
Bindings:
- Convert Qcom IOMMU, Amlogic timer, Freescale sec-v4.0, Toshiba
TC358764 display bridge, Parade PS8622 display bridge, and Xilinx
FPGA bindings to DT schema format
- Add qdu1000 and sa8775p SoC support to Qcom PDC interrupt controller
- Add MediaTek MT8365 UART and SYSIRQ bindings
- Add Arm Cortex-A78C and X1C core compatibles
- Add vendor prefix for Novatek
- Remove bindings for stih415, sti416, stid127 platforms
- Drop uneeded quotes in schema files. This is preparation for yamllint
checking quoting for us.
- Add missing (unevaluated|additional)Properties constraints on child
node schemas
- Clean-up schema comments formatting
- Fix I2C and SPI node bus names in schema examples
- Clean-up some display compatibles schema syntax
- Fix incorrect references to lvds.yaml
- Gather all cache controller bindings in a common directory
DT core:
- Convert unittest to new void .remove platform device hook
- kerneldoc fixes for DT address of_pci_range_to_resource/
of_address_to_resource functions
-----BEGIN PGP SIGNATURE-----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=u3lA
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Convert Qcom IOMMU, Amlogic timer, Freescale sec-v4.0, Toshiba
TC358764 display bridge, Parade PS8622 display bridge, and Xilinx
FPGA bindings to DT schema format
- Add qdu1000 and sa8775p SoC support to Qcom PDC interrupt
controller
- Add MediaTek MT8365 UART and SYSIRQ bindings
- Add Arm Cortex-A78C and X1C core compatibles
- Add vendor prefix for Novatek
- Remove bindings for stih415, sti416, stid127 platforms
- Drop uneeded quotes in schema files. This is preparation for
yamllint checking quoting for us.
- Add missing (unevaluated|additional)Properties constraints on child
node schemas
- Clean-up schema comments formatting
- Fix I2C and SPI node bus names in schema examples
- Clean-up some display compatibles schema syntax
- Fix incorrect references to lvds.yaml
- Gather all cache controller bindings in a common directory
DT core:
- Convert unittest to new void .remove platform device hook
- kerneldoc fixes for DT address of_pci_range_to_resource/
of_address_to_resource functions"
* tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits)
dt-bindings: rng: Drop unneeded quotes
dt-bindings: arm/soc: mediatek: Drop unneeded quotes
dt-bindings: soc: qcom: Drop unneeded quotes
dt-bindings: i2c: samsung: Fix 'deprecated' value
dt-bindings: display: Fix lvds.yaml references
dt-bindings: display: simplify compatibles syntax
dt-bindings: display: mediatek: simplify compatibles syntax
dt-bindings: drm/bridge: ti-sn65dsi86: Fix the video-interfaces.yaml references
dt-bindings: timer: Drop unneeded quotes
dt-bindings: interrupt-controller: qcom,pdc: document qcom,qdu1000-pdc
dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p
dt-bindings: reset: remove stih415/stih416 reset
dt-bindings: net: dwmac: sti: remove stih415/sti416/stid127
dt-bindings: irqchip: sti: remove stih415/stih416 and stid127
dt-bindings: iommu: Convert QCOM IOMMU to YAML
dt-bindings: irqchip: ti,sci-inta: Add optional power-domains property
dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas
of: address: Reshuffle to remove forward declarations
of: address: Fix documented return value of of_pci_range_to_resource()
of: address: Document return value of of_address_to_resource()
...
|
||
|
Linus Torvalds
|
6df969b77e |
iommufd for 6.4
Two series:
- Reorganize how the hardware page table objects are managed,
particularly their destruction flow. Increase the selftest
test coverage in this area by creating a more complete mock
iommu driver.
This is preparation to add a replace operation for HWPT binding,
which is done but waiting for the VFIO parts to complete so there
is a user.
- Split the iommufd support for "access" to make it two step - allocate
an access then link it to an IOAS. Update VFIO and have VFIO always
create an access even for the VFIO mdevs that never do DMA.
This is also preperation for the replace VFIO series that will allow
replace to work on access types as well.
Three minor fixes:
- Sykzaller found the selftest code didn't check for overflow when
processing user VAs
- smatch noted a .data item should have been static
- Add a selftest that reproduces a syzkaller bug for batch carry already
fixed in rc
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZEfgkQAKCRCFwuHvBreF
YRw7AQD5BhiTzdTMlMPAasihb2ZITYs3MyiZrxICZuZf3CksLAD9FcO3aYPq01ge
7yHF+LeWHYq1dR6x7YTvcbc3apFFIgA=
=0j6E
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two series:
- Reorganize how the hardware page table objects are managed,
particularly their destruction flow. Increase the selftest test
coverage in this area by creating a more complete mock iommu
driver.
This is preparation to add a replace operation for HWPT binding,
which is done but waiting for the VFIO parts to complete so there
is a user.
- Split the iommufd support for "access" to make it two step -
allocate an access then link it to an IOAS. Update VFIO and have
VFIO always create an access even for the VFIO mdevs that never do
DMA.
This is also preperation for the replace VFIO series that will
allow replace to work on access types as well.
Three minor fixes:
- Sykzaller found the selftest code didn't check for overflow when
processing user VAs
- smatch noted a .data item should have been static
- Add a selftest that reproduces a syzkaller bug for batch carry
already fixed in rc"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (21 commits)
iommufd/selftest: Cover domain unmap with huge pages and access
iommufd/selftest: Set varaiable mock_iommu_device storage-class-specifier to static
vfio: Check the presence for iommufd callbacks in __vfio_register_dev()
vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID
vfio-iommufd: No need to record iommufd_ctx in vfio_device
iommufd: Create access in vfio_iommufd_emulated_bind()
iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas()
iommufd/selftest: Catch overflow of uptr and length
iommufd/selftest: Add a selftest for iommufd_device_attach() with a hwpt argument
iommufd/selftest: Make selftest create a more complete mock device
iommufd/selftest: Rename the remaining mock device_id's to stdev_id
iommufd/selftest: Rename domain_id to hwpt_id for FIXTURE iommufd_mock_domain
iommufd/selftest: Rename domain_id to stdev_id for FIXTURE iommufd_ioas
iommufd/selftest: Rename the sefltest 'device_id' to 'stdev_id'
iommufd: Make iommufd_hw_pagetable_alloc() do iopt_table_add_domain()
iommufd: Move iommufd_device to iommufd_private.h
iommufd: Move ioas related HWPT destruction into iommufd_hw_pagetable_destroy()
iommufd: Consistently manage hwpt_item
iommufd: Add iommufd_lock_obj() around the auto-domains hwpts
...
|
||
|
Linus Torvalds
|
32f7ad0fbe |
drm-next fixes for 6.4-rc1
ttm: - Fix TTM build on archs where PMD_SHIFT is not constant. qaic: - Revert uAPI from accel/qaic. panel: - Improve error handling in nt35950. - Fix double unregister in otm8009a when removing the driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmRJ0tIACgkQDHTzWXnE hr7+JBAAlkoHQe46irJ4tJ1rpqpoWWPyDOiNJtORBHnpu5ZtY4uECs2QghMt7ucF EMvbBrO2pBjXVRwmQpxBWTi+8byozzptYy2xFVGsUSVKDeyKfbtXjCqrifU6+CTu 5wyz8jIH5TI9ldSPSDrP7sKcbLMHBglN6JDVBhdQs3FwY0WPS0dmokbsMUWtcvb4 WiS56TAWHwrHz3JwgYi8sq8/ELh+QHv5iEmbzEKrqM3HRnFFen8zX3Zkb0W8JOmU +UyUmXkpuGF6aTqvl+GqjuJ9aBdDII2F1yfNAJV+pUdT++05rbNHVXls/tr5Aqcp wZOlYBXYU7L5AUfmgaMLkqChliYThU+adKSHAZIVn0d/k8WYSjOUJZi9JrH6Uvp+ zII9ylPhaCt+kvUDNL0BmEGzAQDgA1IYSqG1MmKVCgju4P5kuRMnMVX1J0MBE7Mi xaA7UjqkxsJAT9vNdMCRiJ45uvkKHVBq/FGRuwMPtxZk5BHOdL+MQdrG7NSqQXO8 2E9BBFgdr4ENsSSrAV/GTuaK7uVx55RDsR+Udlqr0qIInbGnX+qiYag3/oTspvE6 h39vUBL3XxRER7cra1+l1lKZo31ZR00sEKOaeQH3xI+FNXW+NJtVrwrMzyMwhr7r ZL/Ta5wpH4PTRZKq0mFP3oZ6FykgwQ0x1acN9UyQq9h4vAsusis= =/auu -----END PGP SIGNATURE----- Merge tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "A bit out of routine fixes pull for rc1. There's a build breakage on some platforms due to ttm, this has that fix + qaic uapi removal + minor panel fixes. ttm: - Fix TTM build on archs where PMD_SHIFT is not constant qaic: - Revert uAPI from accel/qaic panel: - Improve error handling in nt35950 - Fix double unregister in otm8009a when removing the driver" * tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm: drm/panel: novatek-nt35950: Only unregister DSI1 if it exists drm/panel: otm8009a: Set backlight parent to panel device drm/panel: novatek-nt35950: Improve error handling drm/ttm: revert "Reduce the number of used allocation orders for TTM pages" Revert "accel/qaic: Add mhi_qaic_cntl" |
||
Vlastimil Babka
|
7e7757876f |
mm/mremap: fix vm_pgoff in vma_merge() case 3
After upgrading build guests to v6.3, rpm started segfaulting for specific packages, which was bisected to commit |
||
Dave Airlie
|
cf03e2956a |
Merge tag 'drm-misc-next-fixes-2023-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next-fixes for v6.4-rc1: - Revert uAPI from accel/qaic. - Fix TTM build on archs where PMD_SHIFT is not constant. - Improve error handling in nt35950. - Fix double unregister in otm8009a when removing the driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/45757de9-75d8-5b41-f1f9-562a7c4675b9@linux.intel.com |
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
|
Linus Torvalds
|
b68ee1c613 |
SCSI misc on 20230426
Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target, mpi3mr, hisi_sas, arcmsr). The major core change is the constification of the host templates (which touches everything) along with other minor fixups and clean ups. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZEmJACYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU4FAP0WYhFC rkbY203/+ErUuwvOKum0VwJKUowCaUD0MBwScAD+Ok/NWobmjdXUBbPUbvVkr+hE 8B/xs9hodX+1fVJcVG0= =fS/j -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target, mpi3mr, hisi_sas, arcmsr). The major core change is the constification of the host templates (which touches everything) along with other minor fixups and clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command() scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately scsi: cxlflash: s/semahpore/semaphore/ scsi: lpfc: Silence an incorrect device output scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation scsi: scsi_debug: Fix missing error code in scsi_debug_init() scsi: hisi_sas: Work around build failure in suspend function scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup() scsi: mpt3sas: Fix an issue when driver is being removed scsi: mpt3sas: Remove HBA BIOS version in the kernel log scsi: target: core: Fix invalid memory access scsi: scsi_debug: Drop sdebug_queue scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll() scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd scsi: scsi_debug: Use scsi_block_requests() to block queues scsi: scsi_debug: Protect block_unblock_all_queues() with mutex scsi: scsi_debug: Change shost list lock to a mutex ... |
||
Jiri Kosina
|
c3a6ef330a |
Merge branch 'for-6.4/wacom' into for-linus
- improved handling of battery quirk (Jason Gerecke) - lazy initialization of battery interfaces (Jason Gerecke) |
||
|
Jiri Kosina
|
ab396fb2f3 |
Merge branch 'for-6.4/tests' into for-linus
- import of bunch of HID selftests from out-of-tree hid-tools project (Benjamin Tissoires) |
||
|
Jiri Kosina
|
67471b8998 |
Merge branch 'for-6.4/nintendo' into for-linus
- drastically reducing Bluetooth disconnects on hid-nintendo driven devices (Daniel J. Ogorchock) - proper rumble queue overrun handling (Daniel J. Ogorchock) |
||
|
Jiri Kosina
|
5fce154a4d |
Merge branch 'for-6.4/mcp2221' into for-linus
- generic code improvements for mcp2221 driver (Louis Morhet) |
||
|
Jiri Kosina
|
0549fbac40 |
Merge branch 'for-6.4/logitech-hidpp' into for-linus
- support for ADC measurement (Bastien Nocera) - support for Logitech G935 (Bastien Nocera) |
||
|
Jiri Kosina
|
d411b5aa1f |
Merge branch 'for-6.4/led-includes' into for-linus
- explicit include fixes (Thomas Weißschuh) |
||
|
Jiri Kosina
|
b680751bd9 |
Merge branch 'for-6.4/kye' into for-linus
- generic support for all Kye tablets (David Yang) |
||
|
Jiri Kosina
|
ba984d2798 |
Merge branch 'for-6.4/i2c-hid' into for-linus
- reset GPIO support (Hans de Goede) |
||
|
Jiri Kosina
|
63f7cf6659 |
Merge branch 'for-6.4/core' into for-linus
- improve handling of generic "Digitizer" usage (Jason Gerecke) - support for KEY_CAMERA_FOCUS (Feng Qi) |
||
|
Jiri Kosina
|
5f86a084a4 |
Merge branch 'for-6.4/apple' into for-linus
- quirks for Apple Geyser 3 and Apple Geyser 4 (Alex Henrie) |
||
|
Jiri Kosina
|
cdc780f044 |
Merge branch 'for-6.4/amd-sfh' into for-linus
- assorted functional fixes for amd-sfh driver (Basavaraj Natikar) |
||
|
Linus Torvalds
|
36006b1d5c |
ata change for 6.4-rc1
* Many cleanups of the pata_parport driver and of its protocol modules,
from Ondrej.
* Remove unused code (ata_id_xxx() functions), from Sergey.
* Add Add UniPhier SATA controller DT bindings, from Kunihiko.
* Fix dependencies for the Freescale QorIQ AHCI SATA controller driver,
from Geert.
* DT property handling improvements, from Rob.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZEfg+AAKCRDdoc3SxdoY
dl+WAQDypaM0OuXFqVin9s49pR2UsOE7TKNrlPUsjN2p+gCBNAEA1bFLzuTWVriA
qlzl3/3gU33aeBqrAnxkH7k6gf0q2gY=
=8CO+
-----END PGP SIGNATURE-----
Merge tag 'ata-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Many cleanups of the pata_parport driver and of its protocol modules
(Ondrej)
- Remove unused code (ata_id_xxx() functions) (Sergey)
- Add Add UniPhier SATA controller DT bindings (Kunihiko)
- Fix dependencies for the Freescale QorIQ AHCI SATA controller driver
(Geert)
- DT property handling improvements (Rob)
* tag 'ata-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (57 commits)
ata: pata_parport-bpck6: Declare mode_map as static
ata: pata_parport-bpck6: Remove dependency on 64BIT
ata: pata_parport-bpck6: reduce indents in bpck6_open
ata: pata_parport-bpck6: delete ppc6lnx.c
ata: pata_parport-bpck6: move defines and mode_map to bpck6.c
ata: pata_parport-bpck6: move ppc6_wr_data_byte to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_rd_data_byte to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_send_cmd to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_deselect to bpck6.c and rename
ata: pata_parport-bpck6: merge ppc6_select into bpck6_open
ata: pata_parport-bpck6: move ppc6_open to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_wr_extout to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_wait_for_fifo to bpck6.c and rename
ata: pata_parport-bpck6: merge ppc6_wr_data_blk into bpck6_write_block
ata: pata_parport-bpck6: merge ppc6_rd_data_blk into bpck6_read_block
ata: pata_parport-bpck6: merge ppc6_wr_port16_blk into bpck6_write_block
ata: pata_parport-bpck6: merge ppc6_rd_port16_blk into bpck6_read_block
ata: pata_parport-bpck6: merge ppc6_wr_port into bpck6_write_regr
ata: pata_parport-bpck6: merge ppc6_rd_port into bpck6_read_regr
ata: pata_parport-bpck6: remove ppc6_close
...
|
||
|
Linus Torvalds
|
48dc810012 |
- Split dm-bufio's rw_semaphore and rbtree. Offers improvements to
dm-bufio's locking to allow increased concurrent IO -- particularly for read access for buffers already in dm-bufio's cache. - Also split dm-bio-prison-v1's spinlock and rbtree with comparable aim at improving concurrent IO (for the DM thinp target). - Both the dm-bufio and dm-bio-prison-v1 scaling of the number of locks and rbtrees used are managed by dm_num_hash_locks(). And the hash function used by both is dm_hash_locks_index(). - Allow DM targets to require DISCARD, WRITE_ZEROES and SECURE_ERASE to be split at the target specified boundary (in terms of max_discard_sectors, max_write_zeroes_sectors and max_secure_erase_sectors respectively). - DM verity error handling fix for check_at_most_once on FEC. - Update DM verity target to emit audit events on verification failure and more. - DM core ->io_hints improvements needed in support of new discard support that is added to the DM "zero" and "error" targets. - Fix missing kmem_cache_destroy() call in initialization error path of both the DM integrity and DM clone targets. - A couple fixes for DM flakey, also add "error_reads" feature. - Fix DM core's resume to not lock FS when the DM map is NULL; otherwise initial table load can race with FS mount that takes superblock's ->s_umount rw_semaphore. - Various small improvements to both DM core and DM targets. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmRGtWwACgkQxSPxCi2d A1pBqgf/W7op3/PdXBI+tlb7j05MEvMaZx0vz3l+qF36SMglaP1yZLZPiU9MCX2V Sm2t4p7VEn5gAxvmzqa0/pLINC7u/m1IW9O6y3qdOEFAgwJ2st+/yaDqgguN5kiA uOzecyDfR7n0WU5rkaO2EUneO7MrYweLR3IROFNFNHndl4bVJOafDcOJvmsI4YYe 5PIMHb+AGND+O2lIVOvSiPD6e85trcRWkr2X6DUYlllV3XEaBLke5MP1OAp+o/Y5 MFPfznnuiEvcFAzsBoDebC5j7RBQjHw12Bp8ltZV1ZFbdvluw9q1GD2/uyR5UolV jmerZXKThV7lRJYqilUmt74Rxl2JSg== =zPkM -----END PGP SIGNATURE----- Merge tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Split dm-bufio's rw_semaphore and rbtree. Offers improvements to dm-bufio's locking to allow increased concurrent IO -- particularly for read access for buffers already in dm-bufio's cache. - Also split dm-bio-prison-v1's spinlock and rbtree with comparable aim at improving concurrent IO (for the DM thinp target). - Both the dm-bufio and dm-bio-prison-v1 scaling of the number of locks and rbtrees used are managed by dm_num_hash_locks(). And the hash function used by both is dm_hash_locks_index(). - Allow DM targets to require DISCARD, WRITE_ZEROES and SECURE_ERASE to be split at the target specified boundary (in terms of max_discard_sectors, max_write_zeroes_sectors and max_secure_erase_sectors respectively). - DM verity error handling fix for check_at_most_once on FEC. - Update DM verity target to emit audit events on verification failure and more. - DM core ->io_hints improvements needed in support of new discard support that is added to the DM "zero" and "error" targets. - Fix missing kmem_cache_destroy() call in initialization error path of both the DM integrity and DM clone targets. - A couple fixes for DM flakey, also add "error_reads" feature. - Fix DM core's resume to not lock FS when the DM map is NULL; otherwise initial table load can race with FS mount that takes superblock's ->s_umount rw_semaphore. - Various small improvements to both DM core and DM targets. * tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits) dm: don't lock fs when the map is NULL in process of resume dm flakey: add an "error_reads" option dm flakey: remove trailing space in the table line dm flakey: fix a crash with invalid table line dm ioctl: fix nested locking in table_clear() to remove deadlock concern dm: unexport dm_get_queue_limits() dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE dm: add helper macro for simple DM target module init and exit dm raid: remove unused d variable dm: remove unnecessary (void*) conversions dm mirror: add DMERR message if alloc_workqueue fails dm: push error reporting down to dm_register_target() dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path dm clone: call kmem_cache_destroy() in dm_clone_init() error path dm error: add discard support dm zero: add discard support dm table: allow targets without devices to set ->io_hints dm verity: emit audit events on verification failure and more dm verity: fix error handling for check_at_most_once on FEC dm: improve hash_locks sizing and hash function ... |
||
|
Linus Torvalds
|
9dd6956b38 |
for-6.4/block-2023-04-21
-----BEGIN PGP SIGNATURE-----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=W1Zb
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
|
||
|
Linus Torvalds
|
5b9a7bb72f |
for-6.4/io_uring-2023-04-21
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRCvawQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpiKTEACvp0jm3Lyhxb8RMsx5T6Ko0pFH3DIymiL4 xpoZmAUflOjD0c+99FwHRQqKKXuo3OelhW+YOm0N6OOAt6JMSGmKpZh0UNJx+Fgj wMwiQ0X3Y5SaAsr5ZpXM+G1BV7ajihsMpu8/a718ERB3U3cLDz2qJfnzJh+E5Ip5 pYB4vS3+/FAER2MYQ7IPeovch2wWYtxDPztOxNX6SORu3OvpWiz1GR/+8u0tqj50 ROq97Jwjh5Tl4zP356EUSj/Vkfdr2yb+NlLbun8My5x8tYftZjnrNQ/+qeJNLwB8 tWTrg166ox/VX3aYZruAgUPv0IyGPZg7qZV5R72ChBK3VhIbOOLOCm/V6dhvl/XH vu2FG7J8WylWHmc+OU8u7TeSJdrwxTLs4e2IFUBK9ymAYFp0Q9S924fgvSYsFvVB iNn58SPRIbuA4SPtRfCd7pENtZW/QKfBC5CYK+pjsZVX40c9dbe40foVu4t2/EAo gi9+gSWEUVRRW2osxjaHXh78cW63g0j9bNfS6n1Vy32Oo5Mwm7n+bVWqCU5bCBXI MpPOk6AgME3UPwFzGzSmx+PVw8VacPxYP1NF8RFTCwj7OowFnrolJtruDmKJgXWY BN41EDo41k/C5mEu16Jr9rAkHeVhHaNZ+JhyDrzv8llJ/rv+4zEJw9SrhnpufmOX +YERd/ndAw== =Erfk -----END PGP SIGNATURE----- Merge tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Cleanup of the io-wq per-node mapping, notably getting rid of it so we just have a single io_wq entry per ring (Breno) - Followup to the above, move accounting to io_wq as well and completely drop struct io_wqe (Gabriel) - Enable KASAN for the internal io_uring caches (Breno) - Add support for multishot timeouts. Some applications use timeouts to wake someone waiting on completion entries, and this makes it a bit easier to just have a recurring timer rather than needing to rearm it every time (David) - Support archs that have shared cache coloring between userspace and the kernel, and hence have strict address requirements for mmap'ing the ring into userspace. This should only be parisc/hppa. (Helge, me) - XFS has supported O_DIRECT writes without needing to lock the inode exclusively for a long time, and ext4 now supports it as well. This is true for the common cases of not extending the file size. Flag the fs as having that feature, and utilize that to avoid serializing those writes in io_uring (me) - Enable completion batching for uring commands (me) - Revert patch adding io_uring restriction to what can be GUP mapped or not. This does not belong in io_uring, as io_uring isn't really special in this regard. Since this is also getting in the way of cleanups and improvements to the GUP code, get rid of if (me) - A few series greatly reducing the complexity of registered resources, like buffers or files. Not only does this clean up the code a lot, the simplified code is also a LOT more efficient (Pavel) - Series optimizing how we wait for events and run task_work related to it (Pavel) - Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel) - Misc cleanups and improvements (Pavel, me) * tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits) Revert "io_uring/rsrc: disallow multi-source reg buffers" io_uring: add support for multishot timeouts io_uring/rsrc: disassociate nodes and rsrc_data io_uring/rsrc: devirtualise rsrc put callbacks io_uring/rsrc: pass node to io_rsrc_put_work() io_uring/rsrc: inline io_rsrc_put_work() io_uring/rsrc: add empty flag in rsrc_node io_uring/rsrc: merge nodes and io_rsrc_put io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal io_uring/rsrc: remove unused io_rsrc_node::llist io_uring/rsrc: refactor io_queue_rsrc_removal io_uring/rsrc: simplify single file node switching io_uring/rsrc: clean up __io_sqe_buffers_update() io_uring/rsrc: inline switch_start fast path io_uring/rsrc: remove rsrc_data refs io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce io_uring/rsrc: use wq for quiescing io_uring/rsrc: refactor io_rsrc_ref_quiesce io_uring/rsrc: remove io_rsrc_node::done io_uring/rsrc: use nospec'ed indexes ... |
||
|
Linus Torvalds
|
5c7ecada25 |
f2fs update for 6.4-rc1
In this round, we've mainly modified to support non-power-of-two zone size, which is not required for f2fs by design. In order to avoid arch dependency, we refactored the messy rb_entry structure shared across different extent_cache. In addition to the improvement, we've also fixed several subtle bugs and error cases. Enhancement: - support non-power-of-two zone size for zoned device - remove sharing the rb_entry structure in extent cache - refactor f2fs_gc to call checkpoint in urgent condition - support iopoll Bug fix: - fix potential corruption when moving a directory - fix to avoid use-after-free for cached IPU bio - fix the folio private usage - avoid kernel warnings or panics in the cp_error case - fix to recover quota data correctly - fix some bugs in atomic operations - fix system crash due to lack of free space in LFS - fix null pointer panic in tracepoint in __replace_atomic_write_block - fix iostat lock protection - fix scheduling while atomic in decompression path - preserve direct write semantics when buffering is forced - fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmRIHMMACgkQQBSofoJI UNI3Mw//eQvxUXaWtCjTJQtXPotaah6ZcvnMMtfl6Cf0Z8Sq4L9q4yQMA16MXbLU zz3cexKXIHTzqWfqFLunaj6cmH/THAY3L3fTkFhE+dx1H2IaFprGLW3H8hW/58tr j9365RPVY2d/3agB1KikTj6FQ5OTGibkZagjsC28VmQ30VLIm+4jnHdIoX92UP+k 87JQ/fbG2XAiHX/ifcVuMXY3++db9jaZahsmhdJ1LNTZzztO241RzrNoBsLcSwSZ DkPgJXARQzFNDRfveRXSbV3ygR9C62pNITtSGC86ZRLyoAmko9se+nMEFH7YEkUy Rhf0Qzq2Gy6ThiVo8ZjuLvNycF0oj3OefX1PQLT6vzkv3Sv4Yij48bN1HqPdYsKH 3hPZd2V7A3o2LCJPPPNjZ/6nuKhrX+kU33FjUrxiYqz7Lt74j70vVEHQ7vSCGkrQ YpQYVXFr1hdejdemCpwgdvcEegNlV0GfqCG5KL1f7jJiGHfvxZnOEJ3x9dCQFTIE xVoWTzw9pbmBkTudrFNVRlX2RSQYSvgLFwUhQ3WE0qNu0mUMP+4E+50iKHYraJ7R W1TajZ+ttUJAnZ076vGGEOxabefEdtReOtdstohcJlDaGm5sI9I9CXQRvY4ZSymW l7ZHY/b+/IzP+/fLEX7DgTnWip37H14FImvjYRGpSEzc6sXiOUU= =qHTl -----END PGP SIGNATURE----- Merge tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs update from Jaegeuk Kim: "In this round, we've mainly modified to support non-power-of-two zone size, which is not required for f2fs by design. In order to avoid arch dependency, we refactored the messy rb_entry structure shared across different extent_cache. In addition to the improvement, we've also fixed several subtle bugs and error cases. Enhancements: - support non-power-of-two zone size for zoned device - remove sharing the rb_entry structure in extent cache - refactor f2fs_gc to call checkpoint in urgent condition - support iopoll Bug fixes: - fix potential corruption when moving a directory - fix to avoid use-after-free for cached IPU bio - fix the folio private usage - avoid kernel warnings or panics in the cp_error case - fix to recover quota data correctly - fix some bugs in atomic operations - fix system crash due to lack of free space in LFS - fix null pointer panic in tracepoint in __replace_atomic_write_block - fix iostat lock protection - fix scheduling while atomic in decompression path - preserve direct write semantics when buffering is forced - fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()" * tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: remove unnessary comment in __may_age_extent_tree f2fs: allocate node blocks for atomic write block replacement f2fs: use cow inode data when updating atomic write f2fs: remove power-of-two limitation of zoned device f2fs: allocate trace path buffer from names_cache f2fs: add has_enough_free_secs() f2fs: relax sanity check if checkpoint is corrupted f2fs: refactor f2fs_gc to call checkpoint in urgent condition f2fs: remove folio_detach_private() in .invalidate_folio and .release_folio f2fs: remove bulk remove_proc_entry() and unnecessary kobject_del() f2fs: support iopoll method f2fs: remove batched_trim_sections node description f2fs: fix to check return value of inc_valid_block_count() f2fs: fix to check return value of f2fs_do_truncate_blocks() f2fs: fix passing relative address when discard zones f2fs: fix potential corruption when moving a directory f2fs: add radix_tree_preload_end in error case f2fs: fix to recover quota data correctly f2fs: fix to check readonly condition correctly docs: f2fs: Correct instruction to disable checkpoint ... |
||
|
Linus Torvalds
|
fbfaf03eba |
dlm for 6.4
Remove some unused features (related to lock timeouts) that have been previously scheduled for removal. Fix a bug where the pending callback flag would be incorrectly cleared, which could potentially result in missing a completion callback. Use an unbound workqueue for dlm socket handling so that socket operations can be processed with less delay. Fix possible lockspace join connection errors with large clusters (e.g. over 16 nodes) caused by a small socket backlog setting. Use atomic bit ops for internal flags to help avoid mistakes copying flag values from messages. Fix recently introduced bug where memory for lvb data could be unnecessarily allocated for a lock. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJkR/JxAAoJEDgbc8f8gGmq2p0P/j3OcxdOXkx9LVpKdjuAhK/M A4Q46J9Z/Ytl4vT7x6i4x2fZXk8cTOkQZ3TkYMGbIc8LV4FZpO4/pIP+GnSDkmwY 1/AJgauskoewPuCNe+SUCawFMKPhUCXKOXNhyfAHlBS+NS8iIJhVKOP7mOMUawKs 4WiI6fEFBig2z56LHgnAIdzx1UGJ+AE1XlwEca1jVvtMYW03HX9h5Tt1BP1NeAKx oPrYQaUsctHlAI+fo0PnjimGcjXa2av9YNnTHpqVfYw6ntSdriEXQVosX/tcRV8E dVXmQP2Ox20mNRu9vHkAK8x2LQLj7HuwmohdUvvDFp1cIEglbiRdF6IolyhD2Up1 ETeJ5EU/6ktJOHrOewUCTcJoLrAcwmklgj9fzvW7fPN4zNsEUCYgoenuSK8bW+la jDbO26Rh+cMg2pC6Rz8z8azadwTQlFXDjvTDOnmb2jr+tfIEWj/VTWCTQ4Un3EEg 4xJ1dCvlLCRkYoDN3QTF9TxapSTohtjtQl85yrLULhdUWhQuRQd93rHeNgwDf8Ys NUzuL+IR+SEfvVyRezYfdyUBT26ld8pGVzJqlKvXUXTPBypnw9aoGAYhXx3A8fYo QLIz7lc0/pvkWaQ9zNyedf8LDIYCbZuTcMpmTEgLy+q6BTJWS2ZJT5oeNvGvnRw5 Zc7iUmGNQ5XKuVEhtTFA =900J -----END PGP SIGNATURE----- Merge tag 'dlm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - Remove some unused features (related to lock timeouts) that have been previously scheduled for removal - Fix a bug where the pending callback flag would be incorrectly cleared, which could potentially result in missing a completion callback - Use an unbound workqueue for dlm socket handling so that socket operations can be processed with less delay - Fix possible lockspace join connection errors with large clusters (e.g. over 16 nodes) caused by a small socket backlog setting - Use atomic bit ops for internal flags to help avoid mistakes copying flag values from messages - Fix recently introduced bug where memory for lvb data could be unnecessarily allocated for a lock * tag 'dlm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: fs: dlm: stop unnecessarily filling zero ms_extra bytes fs: dlm: switch lkb_sbflags to atomic ops fs: dlm: rsb hash table flag value to atomic ops fs: dlm: move internal flags to atomic ops fs: dlm: change dflags to use atomic bits fs: dlm: store lkb distributed flags into own value fs: dlm: remove DLM_IFL_LOCAL_MS flag fs: dlm: rename stub to local message flag fs: dlm: remove deprecated code parts DLM: increase socket backlog to avoid hangs with 16 nodes fs: dlm: add unbound flag to dlm_io workqueue fs: dlm: fix DLM_IFL_CB_PENDING gets overwritten |
||
|
Linus Torvalds
|
e0fcc9c68d |
gfs2 fixes
- Fix revoke processing at unmount and on read-only remount. - Refuse reading in inodes with an impossible indirect block height. - Various minor cleanups. -----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmRH00EUHGFncnVlbmJh QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTpfSw//a0IG/6tVfPwlCPd1qPKN/JbxHQVa 3JtRJXr5+RJ3vIKmJb+AFfEiPHRKgCk28d9hMbW8j3ieKSy/dPJe8ARIZmu8phpK dOSiue87v4Pz6Tz2qpb6KgzUENohsqjTy0mEAEWxxZb7mWxUqj7t057hiEp/9NX6 jXcfoNInMxnf2HX3d11LoHXYOX37xvEjyhbZ4OmPn+xzmYQcfhuO96CTrIOe7lKe U8dbFzDwtoUxYljb16do0OLva/YxaNdH33yCzrixVi9ki1aCIH6A2paznlUCzgF1 wzOhzV3kbz5e4flov34X1Jnd5RVkBmzMMM5bkcJzNg6JOSGL0bLg0PGYiXASAfje KmsNVvq0yMWLLQIr2gMcEVI1IVDxkNKJruizbFfUs/SWHI55eDUZtI5jjA0v0cCw 5HRWialgCNdC9Wd/4HW+DfpztwxR5+j52TCtqgyRGQcGvkNtwGMeGgh9/sreuHhr 7Lod7LpBVmEzlXD97VIcJUcU2vhXtGA25pKXFHCilXh/MdA2UpmBWkVUkNVS/awr ZTzoi/WkUIWLLVHxHruLOoJBWit8Mhnuxh1rlY0WD3wDEbnwCZKX8ziTYIsVvkWc d/xjjafrolC6g1m/RoW3rXO/MLXaE0rRy4nb3MLhwsqaAQyZE6puwo40Kj/xNQqf 68kLauI2QFNpFm8= =l1E9 -----END PGP SIGNATURE----- Merge tag 'gfs2-v6.3-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 updates from Andreas Gruenbacher: - Fix revoke processing at unmount and on read-only remount - Refuse reading in inodes with an impossible indirect block height - Various minor cleanups * tag 'gfs2-v6.3-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: gfs2_ail_empty_gl no log flush on error gfs2: Issue message when revokes cannot be written gfs2: Perform second log flush in gfs2_make_fs_ro gfs2: return errors from gfs2_ail_empty_gl gfs2: Move variable assignment behind a null pointer check in inode_go_dump gfs2: Use gfs2_holder_initialized for jindex gfs2: Eliminate gfs2_trim_blocks gfs2: Fix inode height consistency check gfs2: Remove ghs[] from gfs2_unlink gfs2: Remove ghs[] from gfs2_link gfs2: Remove duplicate i_nlink check from gfs2_link() |
||
|
Linus Torvalds
|
85d7ab2463 |
for-6.4-tag
-----BEGIN PGP SIGNATURE-----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=Jt7p
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly core changes and cleanups, some notable fixes and two
performance improvements in directory logging.
The IO path cleanups are removing or refactoring old code, scrub main
loop has been completely rewritten also refactoring old code.
There are some changes to non-btrfs code, mostly trivial, the cgroup
punt bio logic is only moved from generic code.
Performance improvements:
- improve logging changes in a directory during one transaction,
avoid iterating over items and reduce lock contention (fsync time
4x lower)
- when logging directory entries during one transaction, reduce
locking of subvolume trees by checking tree-log instead
(improvement in throughput and latency for concurrent access to a
subvolume)
Notable fixes:
- dev-replace:
- properly honor read mode when requested to avoid reading from
source device
- target device won't be used for eventual read repair, this is
unreliable for NODATASUM files
- when there are unpaired (and unrepairable) metadata during
replace, exit early with error and don't try to finish whole
operation
- scrub ioctl properly rejects unknown flags
- fix global block reserve calculations
- fix partial direct io write when there's a page fault in the
middle, iomap will try to continue with partial request but the
btrfs part did not match that, this can lead to zeros written
instead of data
Core changes:
- io path:
- continued cleanups and refactoring around bio handling
- extent io submit path simplifications and cleanups
- flush write path simplifications and cleanups
- rework logic of passing sync mode of bio, with further cleanups
- rewrite scrub code flow, restructure how the stripes are enumerated
and verified in a more unified way
- allow to set lower threshold for block group reclaim in debug mode
to aid zoned mode testing
- remove obsolete time-based delayed ref throttling logic when
truncating items
- DREW locks are not using percpu variables anymore
- more warning fixes (-Wmaybe-uninitialized)
- u64 division simplifications
- error handling improvements
Non-btrfs code changes:
- push cgroup punt bio logic to btrfs code (there was no other user
of that), the functionality can be now selected separately by
BLK_CGROUP_PUNT_BIO
- crc32c_impl removed after removing last uses in btrfs code
- add btrfs_assertfail() to objtool table"
* tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: mark btrfs_assertfail() __noreturn
btrfs: fix uninitialized variable warnings
btrfs: use log root when iterating over index keys when logging directory
btrfs: avoid iterating over all indexes when logging directory
btrfs: dev-replace: error out if we have unrepaired metadata error during
btrfs: remove pointless loop at btrfs_get_next_valid_item()
btrfs: scrub: reject unsupported scrub flags
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
btrfs: remove unused raid56 functions which were dedicated for scrub
btrfs: scrub: remove scrub_bio structure
btrfs: scrub: remove scrub_block and scrub_sector structures
btrfs: scrub: remove the old scrub recheck code
btrfs: scrub: remove the old writeback infrastructure
btrfs: scrub: remove scrub_parity structure
btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub
btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
btrfs: scrub: introduce helper to queue a stripe for scrub
btrfs: scrub: introduce error reporting functionality for scrub_stripe
btrfs: scrub: introduce a writeback helper for scrub_stripe
...
|
||
|
Linus Torvalds
|
94fc079266 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmRHq24ACgkQnJ2qBz9k QNkowggAuyZ313GrAUNDH2Cvu3PE804LpW6k27VxtIxmgtMSZvuOED0fC99Xt+3y SnQrJKfw4HVKIDT2sx3ECaiKa+v1UBMG+KmaZ5u5qLjxfjY8YHy6TbHMwY/NV2Aj jGgJYN+5E9AJqStzuu4C9fUzgOgvi4IzgNX4hp0WbESVk6jbDqW2KGNAv6IRM9ku qDg54aL8W50uDMgUJysqe180SlDgeYGPBg1OfA7xrzMaBpEK3z5+v52ZlpGNguDP MZMGwZgFLCP2R5Z9+zqhyK9UuIHUDNE05y20+Hsm1AxlI0iVVt+CahQ9T/6P9OBT QQ+vnepQR6ORtFBlPCVgyiTQgsO3Tw== =+MkS -----END PGP SIGNATURE----- Merge tag 'fs_for_v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, reiserfs, udf, and quota updates from Jan Kara: "A couple of small fixes and cleanups for ext2, udf, reiserfs, and quota. The biggest change is making CONFIG_PRINT_QUOTA_WARNING depend on BROKEN with an outlook for removing it completely in an year or so" * tag 'fs_for_v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: mark PRINT_QUOTA_WARNING as BROKEN quota: update Kconfig comment reiserfs: remove unused iter variable quota: Use register_sysctl_init() for registering fs_dqstats_table reiserfs: remove unused sched_count variable ext2: remove redundant assignment to pointer end quota: make dquot_set_dqinfo return errors from ->write_info quota: fixup *_write_file_info() to return proper error code quota: simplify two-level sysctl registration for fs_dqstats_table udf: use wrapper i_blocksize() in udf_discard_prealloc() udf: Use folios in udf_adinicb_writepage() ext2: Check block size validity during mount ext2: Correct maximum ext2 filesystem block size |
||
|
Linus Torvalds
|
0cfcde1faf |
There are a number of major cleanups in ext4 this cycle:
* The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special cases
by Jan Kara.
* Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
* Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
* Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
* Jason Yan has continued to factor out ext4_fill_super() into smaller
functions for improve ease of maintenance and comprehension.
* Josh Triplett has created an uapi header for ext4 userspace API's.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmRHS3IACgkQ8vlZVpUN
gaNN7AgAnFiWfk4UqKpBsUL5iQKJgf2K4tjlNXgPd6ghNns0IdFEyeWSHhr6KLv/
SQeoMMyiWaUcTvZs9DokD8U/9M1ELPUiE9W5c9GxJjM86SXp8BlLYSZTiRoNHzGJ
noQpvikj4qTRviK0rA3q5ICTP2eh1ECHMFJy2wcsZQgwnBelUejQHsTGtOwSvFWF
8wMdfuVtAFDZJjzOxzVKfHP22R5HVRWlAU7P1d97qKjBj4Se3+QchI+zdcIrmU9A
tTmCXj57NpTDyLjS9dIDmLygtTv93lOzOmZS8glw0BFonPcd3ObI4RHVxR+V9xu1
lN13YYgBrK6yfApn9L5XL/31PuLfbg==
=VLBx
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"There are a number of major cleanups in ext4 this cycle:
- The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special
cases by Jan Kara.
- Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
- Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
- Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
- Jason Yan has continued to factor out ext4_fill_super() into
smaller functions for improve ease of maintenance and
comprehension.
- Josh Triplett has created an uapi header for ext4 userspace API's"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits)
ext4: Add a uapi header for ext4 userspace APIs
ext4: remove useless conditional branch code
ext4: remove unneeded check of nr_to_submit
ext4: move dax and encrypt checking into ext4_check_feature_compatibility()
ext4: factor out ext4_block_group_meta_init()
ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry()
ext4: rename two functions with 'check'
ext4: factor out ext4_flex_groups_free()
ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code
ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy()
ext4: factor out ext4_hash_info_init()
Revert "ext4: Fix warnings when freezing filesystem with journaled data"
ext4: Update comment in mpage_prepare_extent_to_map()
ext4: Simplify handling of journalled data in ext4_bmap()
ext4: Drop special handling of journalled data from ext4_quota_on()
ext4: Drop special handling of journalled data from ext4_evict_inode()
ext4: Fix special handling of journalled data from extent zeroing
ext4: Drop special handling of journalled data from extent shifting operations
ext4: Drop special handling of journalled data from ext4_sync_file()
ext4: Commit transaction before writing back pages in data=journal mode
...
|
||
|
Linus Torvalds
|
c3558a6b2a |
fsverity updates for 6.4
Several cleanups and fixes for fs/verity/, including a couple minor fixes to the changes in 6.3 that added support for Merkle tree block sizes less than the page size. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZEdweBQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK8EDAP91ondqa2EZ9C87NsBby+lPdo+wkekh VQ4EMxrg1yhUXQD/fvOp+NeSpnqW8BG3Q78KI7Rgvrpr6CtBF4Lfg4jsWQo= =EEFA -----END PGP SIGNATURE----- Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux Pull fsverity updates from Eric Biggers: "Several cleanups and fixes for fs/verity/, including a couple minor fixes to the changes in 6.3 that added support for Merkle tree block sizes less than the page size" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds fsverity: explicitly check for buffer overflow in build_merkle_tree() fsverity: use WARN_ON_ONCE instead of WARN_ON fs-verity: simplify sysctls with register_sysctl() fs/buffer.c: use b_folio for fsverity work |
||
|
Linus Torvalds
|
dbe0e78d0e |
fscrypt updates for 6.4
A few cleanups for fs/crypto/, and another patch to prepare for the upcoming CephFS encryption support. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZEdv1xQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/jyAPwNyGlOQGuiFwsu8Mjtppkx4NUHK83K gp0N/aT2So6C4wD+IlqDVXiTinnmKOoMs/orBsML4Ub/8etuZZDGu4FipgY= =X+dx -----END PGP SIGNATURE----- Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux Pull fscrypt updates from Eric Biggers: "A few cleanups for fs/crypto/, and another patch to prepare for the upcoming CephFS encryption support" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: optimize fscrypt_initialize() fscrypt: use WARN_ON_ONCE instead of WARN_ON fscrypt: new helper function - fscrypt_prepare_lookup_partial() fs/buffer.c: use b_folio for fscrypt work |
||
|
Linus Torvalds
|
733f7e9c18 |
This update includes the following changes:
API:
- Total usage stats now include all that returned error (instead of some).
- Remove maximum hash statesize limit.
- Add cloning support for hmac and unkeyed hashes.
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build.
- Add accelerated AES/GCM stitched implementation on powerpc P10.
- Add some test vectors for cmac(camellia).
- Remove failure case where jent is unavailable outside of FIPS mode in drbg.
- Add permanent and intermittent health error checks in jitter RNG.
Drivers:
- Add support for 402xx devices in qat.
- Add support for HiSTB TRNG.
- Fix hash concurrency issues in stm32.
- Add OP-TEE firmware support in caam.
-----BEGIN PGP SIGNATURE-----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=ITkW
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
|
||
|
Linus Torvalds
|
98f99e67a1 |
flexible-array transformations for 6.4-rc1
Hi Linus, Please, pull the following patches that transform zero-length and one-element arrays into C99 flexible-array members. These patches have been baking in linux-next for a while now. Thanks -- Gustavo -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmRGi9oACgkQRwW0y0cG 2zFMQQ/+JqGr38V16QHRxlxi5uIJ+MxxUfP9q02q+T33abEGWzSnVrqyAblQT4jd seyjjSVmoL1jDqUzKs00PzpyDfVbbNgK+X3bos/VybGzHmoqwnFeKftSLhiT4pTW a31p4I8Rz0be75KnpJrav0Zz6IZlX6qyvCYxSn/9U7CuOs5XIgFgsPDJ9rpfpxCg 9Cj6ufXQc4XdETBJC8dgMhMsBqPTxiEiyGUo13x8Z+354REgGmsY/WC95RKjCgAN rbOMryaVhIeQktQ9xBysPEhcCL9/rmF817q81J+UGYHnX9Qa4kH5Eve+iJ5x2y51 dKskcX9JBUhA3x7/Yerp2kv7UgoRxJqEl2jarUb7nApJy/42aKz4/J/Lvxqp9GTi NApipD4ge9jEA4CDLsAnAsYF6GwSJH09yV/1CDHuPUT0DFxRcT7umcLWC4mrV9TJ bUuKWa8WvuOHoGZuK4NbgcBbrF4Z2oBwDcql5HcVljNpFjSxQPkeUb2uPtBUrPUZ pssxY+rlGfEA3kiwQIRdluilFcDGPnvJR3mvfNeZhZfoHUeFpvorloM8TeIMMod8 nJBDNpB46PWeASvekpBbXtlKH1SAj0OyIMKP6npolL15R1yk4ceg7JxDIoM2IYiB ye8x437dmJF2MUop/lE/1zNfNmX9xZLyL+KyvzDr7oNtUMJh/wY= =RNbE -----END PGP SIGNATURE----- Merge tag 'flex-array-transformations-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array updates from Gustavo Silva: "Transform more zero-length and one-element arrays into C99 flexible-array members" * tag 'flex-array-transformations-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: uapi: net: ipv6: Replace fake flex-array with flex-array member drm/vmwgfx: Replace one-element array with flexible-array member ASoC: uapi: Replace zero-length arrays with __DECLARE_FLEX_ARRAY() helper |
||
Paolo Abeni
|
9b78d91963 |
net: phy: hide the PHYLIB_LEDS knob
commit
|