Since commit 6b4f7799c6 ("mm: vmscan: invoke slab shrinkers from
shrink_zone()"), slab reclaim and lru page reclaim are done together in
the shrink_node. So we should take min_slab_pages into account when try
to call shrink_node.
Link: https://lkml.kernel.org/r/20220425112118.20924-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now alloc_contig_range() works at pageblock granularity. Change CMA
allocation, which uses alloc_contig_range(), to use pageblock_nr_pages
alignment.
Link: https://lkml.kernel.org/r/20220425143118.2850746-6-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now start_isolate_page_range() is ready to handle arbitrary range
isolation, so move the alignment check/adjustment into the function body.
Do the same for its counterpart undo_isolate_page_range().
alloc_contig_range(), its caller, can pass an arbitrary range instead of a
MAX_ORDER_NR_PAGES aligned one.
Link: https://lkml.kernel.org/r/20220425143118.2850746-5-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_contig_range() worked at MAX_ORDER_NR_PAGES granularity to avoid
merging pageblocks with different migratetypes. It might unnecessarily
convert extra pageblocks at the beginning and at the end of the range.
Change alloc_contig_range() to work at pageblock granularity.
Special handling is needed for free pages and in-use pages across the
boundaries of the range specified by alloc_contig_range(). Because these=
Partially isolated pages causes free page accounting issues. The free
pages will be split and freed into separate migratetype lists; the in-use=
Pages will be migrated then the freed pages will be handled in the
aforementioned way.
[ziy@nvidia.com: fix deadlock/crash]
Link: https://lkml.kernel.org/r/23A7297E-6C84-4138-A9FE-3598234004E6@nvidia.com
Link: https://lkml.kernel.org/r/20220425143118.2850746-4-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enable set_migratetype_isolate() to check specified range for unmovable
pages during isolation to prepare arbitrary range page isolation. The
functionality will take effect in upcoming commits by adjusting the
callers of start_isolate_page_range(), which uses
set_migratetype_isolate().
For example, alloc_contig_range(), which calls start_isolate_page_range(),
accepts unaligned ranges, but because page isolation is currently done at
MAX_ORDER_NR_PAEGS granularity, pages that are out of the specified range
but withint MAX_ORDER_NR_PAEGS alignment might be attempted for isolation
and the failure of isolating these unrelated pages fails the whole
operation undesirably.
Link: https://lkml.kernel.org/r/20220425143118.2850746-3-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Use pageblock_order for cma and alloc_contig_range alignment", v11.
This patchset tries to remove the MAX_ORDER-1 alignment requirement for CMA
and alloc_contig_range(). It prepares for my upcoming changes to make
MAX_ORDER adjustable at boot time[1].
The MAX_ORDER - 1 alignment requirement comes from that
alloc_contig_range() isolates pageblocks to remove free memory from buddy
allocator but isolating only a subset of pageblocks within a page spanning
across multiple pageblocks causes free page accounting issues. Isolated
page might not be put into the right free list, since the code assumes the
migratetype of the first pageblock as the whole free page migratetype.
This is based on the discussion at [2].
To remove the requirement, this patchset:
1. isolates pages at pageblock granularity instead of
max(MAX_ORDER_NR_PAEGS, pageblock_nr_pages);
2. splits free pages across the specified range or migrates in-use pages
across the specified range then splits the freed page to avoid free page
accounting issues (it happens when multiple pageblocks within a single page
have different migratetypes);
3. only checks unmovable pages within the range instead of MAX_ORDER - 1 aligned
range during isolation to avoid alloc_contig_range() failure when pageblocks
within a MAX_ORDER - 1 aligned range are allocated separately.
4. returns pages not in the range as it did before.
One optimization might come later:
1. make MIGRATE_ISOLATE a separate bit to be able to restore the original
migratetypes when isolation fails in the middle of the range.
[1] https://lore.kernel.org/linux-mm/20210805190253.2795604-1-zi.yan@sent.com/
[2] https://lore.kernel.org/linux-mm/d19fb078-cb9b-f60f-e310-fdeea1b947d2@redhat.com/
This patch (of 6):
has_unmovable_pages() is only used in mm/page_isolation.c. Move it from
mm/page_alloc.c and make it static.
Link: https://lkml.kernel.org/r/20220425143118.2850746-2-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We used to have USERFAULTFD configs stored in init/. It makes sense as a
start because that's the default place for storing syscall related
configs.
However userfaultfd evolved a bit in the past few years and some more
config options were added. They're no longer related to syscalls and
start to be not suitable to be kept in the init/ directory anymore,
because they're pure mm concepts.
But it's not ideal either to keep the userfaultfd configs separate from
each other. Hence this patch moves the userfaultfd configs under init/ to
be under mm/ so that we'll start to group all userfaultfd configs
together.
We do have quite a few examples of syscall related configs that are not
put under init/Kconfig: FTRACE_SYSCALLS, SWAP, FILE_LOCKING,
MEMFD_CREATE.. They all reside in the dir where they're more suitable for
the concept. So it seems there's no restriction to keep the role of
having syscall related CONFIG_* under init/ only.
Link: https://lkml.kernel.org/r/20220420144823.35277-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We've had all the necessary changes ready for both shmem and hugetlbfs.
Turn on all the shmem/hugetlbfs switches for userfaultfd-wp.
We can expand UFFD_API_RANGE_IOCTLS_BASIC with _UFFDIO_WRITEPROTECT too
because all existing types now support write protection mode.
Since vma_can_userfault() will be used elsewhere, move into userfaultfd_k.h.
Link: https://lkml.kernel.org/r/20220405014926.15101-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we're trying to collapse a 2M huge shmem page, don't retract pgtable
pmd page if it's registered with uffd-wp, because that pgtable could have
pte markers installed. Recycling of that pgtable means we'll lose the pte
markers. That could cause data loss for an uffd-wp enabled application on
shmem.
Instead of disabling khugepaged on these files, simply skip retracting
these special VMAs, then the page cache can still be merged into a huge
thp, and other mm/vma can still map the range of file with a huge thp when
proper.
Note that checking VM_UFFD_WP needs to be done with mmap_sem held for
write, that avoids race like:
khugepaged user thread
========== ===========
check VM_UFFD_WP, not set
UFFDIO_REGISTER with uffd-wp on shmem
wr-protect some pages (install markers)
take mmap_sem write lock
erase pmd and free pmd page
--> pte markers are dropped unnoticed!
Link: https://lkml.kernel.org/r/20220405014921.14994-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Firstly, we'll need to pass in dst_vma into copy_hugetlb_page_range()
because for uffd-wp it's the dst vma that matters on deciding how we
should treat uffd-wp protected ptes.
We should recognize pte markers during fork and do the pte copy if needed.
[lkp@intel.com: vma_needs_copy can be static]
Link: https://lkml.kernel.org/r/Ylb0CGeFJlc4EzLk@7ec4ff11d4ae
Link: https://lkml.kernel.org/r/20220405014918.14932-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As with shmem uffd-wp special ptes, only drop the uffd-wp special swap pte
if unmapping an entire vma or synchronized such that faults can not race
with the unmap operation. This requires passing zap_flags all the way to
the lowest level hugetlb unmap routine: __unmap_hugepage_range.
In general, unmap calls originated in hugetlbfs code will pass the
ZAP_FLAG_DROP_MARKER flag as synchronization is in place to prevent
faults. The exception is hole punch which will first unmap without any
synchronization. Later when hole punch actually removes the page from the
file, it will check to see if there was a subsequent fault and if so take
the hugetlb fault mutex while unmapping again. This second unmap will
pass in ZAP_FLAG_DROP_MARKER.
The justification of "whether to apply ZAP_FLAG_DROP_MARKER flag when
unmap a hugetlb range" is (IMHO): we should never reach a state when a
page fault could errornously fault in a page-cache page that was
wr-protected to be writable, even in an extremely short period. That
could happen if e.g. we pass ZAP_FLAG_DROP_MARKER when
hugetlbfs_punch_hole() calls hugetlb_vmdelete_list(), because if a page
faults after that call and before remove_inode_hugepages() is executed,
the page cache can be mapped writable again in the small racy window, that
can cause unexpected data overwritten.
[peterx@redhat.com: fix sparse warning]
Link: https://lkml.kernel.org/r/Ylcdw8I1L5iAoWhb@xz-m1.local
[akpm@linux-foundation.org: move zap_flags_t from mm.h to mm_types.h to fix build issues]
Link: https://lkml.kernel.org/r/20220405014915.14873-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Teach hugetlbfs code to wr-protect none ptes just in case the page cache
existed for that pte. Meanwhile we also need to be able to recognize a
uffd-wp marker pte and remove it for uffd_wp_resolve.
Since at it, introduce a variable "psize" to replace all references to the
huge page size fetcher.
Link: https://lkml.kernel.org/r/20220405014912.14815-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allow hugetlb code to handle pte markers just like none ptes. It's mostly
there, we just need to make sure we don't assume hugetlb_no_page() only
handles none pte, so when detecting pte change we should use pte_same()
rather than pte_none(). We need to pass in the old_pte to do the
comparison.
Check the original pte to see whether it's a pte marker, if it is, we
should recover uffd-wp bit on the new pte to be installed, so that the
next write will be trapped by uffd.
Link: https://lkml.kernel.org/r/20220405014909.14761-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This starts from passing cp_flags into hugetlb_change_protection() so
hugetlb will be able to handle MM_CP_UFFD_WP[_RESOLVE] requests.
huge_pte_clear_uffd_wp() is introduced to handle the case where the
UFFDIO_WRITEPROTECT is requested upon migrating huge page entries.
Link: https://lkml.kernel.org/r/20220405014906.14708-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass the wp_copy variable into hugetlb_mcopy_atomic_pte() thoughout the
stack. Apply the UFFD_WP bit if UFFDIO_COPY_MODE_WP is with UFFDIO_COPY.
Hugetlb pages are only managed by hugetlbfs, so we're safe even without
setting dirty bit in the huge pte if the page is installed as read-only.
However we'd better still keep the dirty bit set for a read-only
UFFDIO_COPY pte (when UFFDIO_COPY_MODE_WP bit is set), not only to match
what we do with shmem, but also because the page does contain dirty data
that the kernel just copied from the userspace.
Link: https://lkml.kernel.org/r/20220405014904.14643-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hook up hugetlbfs_fault() with the capability to handle userfaultfd-wp
faults.
We do this slightly earlier than hugetlb_cow() so that we can avoid taking
some extra locks that we definitely don't need.
Link: https://lkml.kernel.org/r/20220405014901.14590-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Normally we skip copy page when fork() for VM_SHARED shmem, but we can't
skip it anymore if uffd-wp is enabled on dst vma. This should only happen
when the src uffd has UFFD_FEATURE_EVENT_FORK enabled on uffd-wp shmem
vma, so that VM_UFFD_WP will be propagated onto dst vma too, then we
should copy the pgtables with uffd-wp bit and pte markers, because these
information will be lost otherwise.
Since the condition checks will become even more complicated for deciding
"whether a vma needs to copy the pgtable during fork()", introduce a
helper vma_needs_copy() for it, so everything will be clearer.
Link: https://lkml.kernel.org/r/20220405014855.14468-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We don't have "huge" version of pte markers, instead when necessary we
split the thp.
However split the thp is not enough, because file-backed thp is handled
totally differently comparing to anonymous thps: rather than doing a real
split, the thp pmd will simply got cleared in __split_huge_pmd_locked().
That is not enough if e.g. when there is a thp covers range [0, 2M) but
we want to wr-protect small page resides in [4K, 8K) range, because after
__split_huge_pmd() returns, there will be a none pmd, and
change_pmd_range() will just skip it right after the split.
Here we leverage the previously introduced change_pmd_prepare() macro so
that we'll populate the pmd with a pgtable page after the pmd split (in
which process the pmd will be cleared for cases like shmem). Then
change_pte_range() will do all the rest for us by installing the uffd-wp
pte marker at any none pte that we'd like to wr-protect.
Link: https://lkml.kernel.org/r/20220405014852.14413-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
File-backed memory is prone to being unmapped at any time. It means all
information in the pte will be dropped, including the uffd-wp flag.
To persist the uffd-wp flag, we'll use the pte markers. This patch
teaches the zap code to understand uffd-wp and know when to keep or drop
the uffd-wp bit.
Add a new flag ZAP_FLAG_DROP_MARKER and set it in zap_details when we
don't want to persist such an information, for example, when destroying
the whole vma, or punching a hole in a shmem file. For the rest cases we
should never drop the uffd-wp bit, or the wr-protect information will get
lost.
The new ZAP_FLAG_DROP_MARKER needs to be put into mm.h rather than
memory.c because it'll be further referenced in hugetlb files later.
Link: https://lkml.kernel.org/r/20220405014847.14295-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
File-backed memories are prone to unmap/swap so the ptes are always
unstable, because they can be easily faulted back later using the page
cache. This could lead to uffd-wp getting lost when unmapping or swapping
out such memory. One example is shmem. PTE markers are needed to store
those information.
This patch prepares it by handling uffd-wp pte markers first it is applied
elsewhere, so that the page fault handler can recognize uffd-wp pte
markers.
The handling of uffd-wp pte markers is similar to missing fault, it's just
that we'll handle this "missing fault" when we see the pte markers,
meanwhile we need to make sure the marker information is kept during
processing the fault.
This is a slow path of uffd-wp handling, because zapping of wr-protected
shmem ptes should be rare. So far it should only trigger in two
conditions:
(1) When trying to punch holes in shmem_fallocate(), there is an
optimization to zap the pgtables before evicting the page.
(2) When swapping out shmem pages.
Because of this, the page fault handling is simplifed too by not sending
the wr-protect message in the 1st page fault, instead the page will be
installed read-only, so the uffd-wp message will be generated in the next
fault, which will trigger the do_wp_page() path of general uffd-wp
handling.
Disable fault-around for all uffd-wp registered ranges for extra safety
just like uffd-minor fault, and clean the code up.
Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass wp_copy into shmem_mfill_atomic_pte() through the stack, then apply
the UFFD_WP bit properly when the UFFDIO_COPY on shmem is with
UFFDIO_COPY_MODE_WP. wp_copy lands mfill_atomic_install_pte() finally.
Note: we must do pte_wrprotect() if !writable in
mfill_atomic_install_pte(), as mk_pte() could return a writable pte (e.g.,
when VM_SHARED on a shmem file).
Link: https://lkml.kernel.org/r/20220405014841.14185-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces the 1st user of pte marker: the uffd-wp marker.
When the pte marker is installed with the uffd-wp bit set, it means this
pte was wr-protected by uffd.
We will use this special pte to arm the ptes that got either unmapped or
swapped out for a file-backed region that was previously wr-protected.
This special pte could trigger a page fault just like swap entries.
This idea is greatly inspired by Hugh and Andrea in the discussion, which
is referenced in the links below.
Some helpers are introduced to detect whether a swap pte is uffd
wr-protected. After the pte marker introduced, one swap pte can be
wr-protected in two forms: either it is a normal swap pte and it has
_PAGE_SWP_UFFD_WP set, or it's a pte marker that has PTE_MARKER_UFFD_WP
set.
[peterx@redhat.com: fixup]
Link: https://lkml.kernel.org/r/YkzKiM8tI4+qOfXF@xz-m1.local
Link: https://lore.kernel.org/lkml/20201126222359.8120-1-peterx@redhat.com/
Link: https://lore.kernel.org/lkml/20201130230603.46187-1-peterx@redhat.com/
Link: https://lkml.kernel.org/r/20220405014838.14131-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch allows do_fault() to trigger on !pte_none() cases too. This
prepares for the pte markers to be handled by do_fault() just like none
pte.
To achieve this, instead of unconditionally check against pte_none() in
finish_fault(), we may hit the case that the orig_pte was some pte marker
so what we want to do is to replace the pte marker with some valid pte
entry. Then if orig_pte was set we'd want to check the current *pte
(under pgtable lock) against orig_pte rather than none pte.
Right now there's no solid way to safely reference orig_pte because when
pmd is not allocated handle_pte_fault() will not initialize orig_pte, so
it's not safe to reference it.
There's another solution proposed before this patch to do pte_clear() for
vmf->orig_pte for pmd==NULL case, however it turns out it'll break arm32
because arm32 could have assumption that pte_t* pointer will always reside
on a real ram32 pgtable, not any kernel stack variable.
To solve this, we add a new flag FAULT_FLAG_ORIG_PTE_VALID, and it'll be
set along with orig_pte when there is valid orig_pte, or it'll be cleared
when orig_pte was not initialized.
It'll be updated every time we call handle_pte_fault(), so e.g. if a page
fault retry happened it'll be properly updated along with orig_pte.
[1] https://lore.kernel.org/lkml/710c48c9-406d-e4c5-a394-10501b951316@samsung.com/
[akpm@linux-foundation.org: coding-style cleanups]
[peterx@redhat.com: fix crash reported by Marek]
Link: https://lkml.kernel.org/r/Ylb9rXJyPm8/ao8f@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014836.14077-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch still does not use pte marker in any way, however it teaches
the core mm about the pte marker idea.
For example, handle_pte_marker() is introduced that will parse and handle
all the pte marker faults.
Many of the places are more about commenting it up - so that we know
there's the possibility of pte marker showing up, and why we don't need
special code for the cases.
[peterx@redhat.com: userfaultfd.c needs swapops.h]
Link: https://lkml.kernel.org/r/YmRlVj3cdizYJsr0@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014833.14015-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "userfaultfd-wp: Support shmem and hugetlbfs", v8.
Overview
========
Userfaultfd-wp anonymous support was merged two years ago. There're quite
a few applications that started to leverage this capability either to take
snapshots for user-app memory, or use it for full user controled swapping.
This series tries to complete the feature for uffd-wp so as to cover all
the RAM-based memory types. So far uffd-wp is the only missing piece of
the rest features (uffd-missing & uffd-minor mode).
One major reason to do so is that anonymous pages are sometimes not
satisfying the need of applications, and there're growing users of either
shmem and hugetlbfs for either sharing purpose (e.g., sharing guest mem
between hypervisor process and device emulation process, shmem local live
migration for upgrades), or for performance on tlb hits.
All these mean that if a uffd-wp app wants to switch to any of the memory
types, it'll stop working. I think it's worthwhile to have the kernel to
cover all these aspects.
This series chose to protect pages in pte level not page level.
One major reason is safety. I have no idea how we could make it safe if
any of the uffd-privileged app can wr-protect a page that any other
application can use. It means this app can block any process potentially
for any time it wants.
The other reason is that it aligns very well with not only the anonymous
uffd-wp solution, but also uffd as a whole. For example, userfaultfd is
implemented fundamentally based on VMAs. We set flags to VMAs showing the
status of uffd tracking. For another per-page based protection solution,
it'll be crossing the fundation line on VMA-based, and it could simply be
too far away already from what's called userfaultfd.
PTE markers
===========
The patchset is based on the idea called PTE markers. It was discussed in
one of the mm alignment sessions, proposed starting from v6, and this is
the 2nd version of it using PTE marker idea.
PTE marker is a new type of swap entry that is ony applicable to file
backed memories like shmem and hugetlbfs. It's used to persist some
pte-level information even if the original present ptes in pgtable are
zapped.
Logically pte markers can store more than uffd-wp information, but so far
only one bit is used for uffd-wp purpose. When the pte marker is
installed with uffd-wp bit set, it means this pte is wr-protected by uffd.
It solves the problem on e.g. file-backed memory mapped ptes got zapped
due to any reason (e.g. thp split, or swapped out), we can still keep the
wr-protect information in the ptes. Then when the page fault triggers
again, we'll know this pte is wr-protected so we can treat the pte the
same as a normal uffd wr-protected pte.
The extra information is encoded into the swap entry, or swp_offset to be
explicit, with the swp_type being PTE_MARKER. So far uffd-wp only uses
one bit out of the swap entry, the rest bits of swp_offset are still
reserved for other purposes.
There're two configs to enable/disable PTE markers:
CONFIG_PTE_MARKER
CONFIG_PTE_MARKER_UFFD_WP
We can set !PTE_MARKER to completely disable all the PTE markers, along
with uffd-wp support. I made two config so we can also enable PTE marker
but disable uffd-wp file-backed for other purposes. At the end of current
series, I'll enable CONFIG_PTE_MARKER by default, but that patch is
standalone and if anyone worries about having it by default, we can also
consider turn it off by dropping that oneliner patch. So far I don't see
a huge risk of doing so, so I kept that patch.
In most cases, PTE markers should be treated as none ptes. It is because
that unlike most of the other swap entry types, there's no PFN or block
offset information encoded into PTE markers but some extra well-defined
bits showing the status of the pte. These bits should only be used as
extra data when servicing an upcoming page fault, and then we behave as if
it's a none pte.
I did spend a lot of time observing all the pte_none() users this time.
It is indeed a challenge because there're a lot, and I hope I didn't miss
a single of them when we should take care of pte markers. Luckily, I
don't think it'll need to be considered in many cases, for example: boot
code, arch code (especially non-x86), kernel-only page handlings (e.g.
CPA), or device driver codes when we're tackling with pure PFN mappings.
I introduced pte_none_mostly() in this series when we need to handle pte
markers the same as none pte, the "mostly" is the other way to write
"either none pte or a pte marker".
I didn't replace pte_none() to cover pte markers for below reasons:
- Very rare case of pte_none() callers will handle pte markers. E.g., all
the kernel pages do not require knowledge of pte markers. So we don't
pollute the major use cases.
- Unconditionally change pte_none() semantics could confuse people, because
pte_none() existed for so long a time.
- Unconditionally change pte_none() semantics could make pte_none() slower
even if in many cases pte markers do not exist.
- There're cases where we'd like to handle pte markers differntly from
pte_none(), so a full replace is also impossible. E.g. khugepaged should
still treat pte markers as normal swap ptes rather than none ptes, because
pte markers will always need a fault-in to merge the marker with a valid
pte. Or the smap code will need to parse PTE markers not none ptes.
Patch Layout
============
Introducing PTE marker and uffd-wp bit in PTE marker:
mm: Introduce PTE_MARKER swap entry
mm: Teach core mm about pte markers
mm: Check against orig_pte for finish_fault()
mm/uffd: PTE_MARKER_UFFD_WP
Adding support for shmem uffd-wp:
mm/shmem: Take care of UFFDIO_COPY_MODE_WP
mm/shmem: Handle uffd-wp special pte in page fault handler
mm/shmem: Persist uffd-wp bit across zapping for file-backed
mm/shmem: Allow uffd wr-protect none pte for file-backed mem
mm/shmem: Allows file-back mem to be uffd wr-protected on thps
mm/shmem: Handle uffd-wp during fork()
Adding support for hugetlbfs uffd-wp:
mm/hugetlb: Introduce huge pte version of uffd-wp helpers
mm/hugetlb: Hook page faults for uffd write protection
mm/hugetlb: Take care of UFFDIO_COPY_MODE_WP
mm/hugetlb: Handle UFFDIO_WRITEPROTECT
mm/hugetlb: Handle pte markers in page faults
mm/hugetlb: Allow uffd wr-protect none ptes
mm/hugetlb: Only drop uffd-wp special pte if required
mm/hugetlb: Handle uffd-wp during fork()
Misc handling on the rest mm for uffd-wp file-backed:
mm/khugepaged: Don't recycle vma pgtable if uffd-wp registered
mm/pagemap: Recognize uffd-wp bit for shmem/hugetlbfs
Enabling of uffd-wp on file-backed memory:
mm/uffd: Enable write protection for shmem & hugetlbfs
mm: Enable PTE markers by default
selftests/uffd: Enable uffd-wp for shmem/hugetlbfs
Tests
=====
- Compile test on x86_64 and aarch64 on different configs
- Kernel selftests
- uffd-test [0]
- Umapsort [1,2] test for shmem/hugetlb, with swap on/off
[0] https://github.com/xzpeter/clibs/tree/master/uffd-test
[1] https://github.com/xzpeter/umap-apps/tree/peter
[2] https://github.com/xzpeter/umap/tree/peter-shmem-hugetlbfs
This patch (of 23):
Introduces a new swap entry type called PTE_MARKER. It can be installed
for any pte that maps a file-backed memory when the pte is temporarily
zapped, so as to maintain per-pte information.
The information that kept in the pte is called a "marker". Here we define
the marker as "unsigned long" just to match pgoff_t, however it will only
work if it still fits in swp_offset(), which is e.g. currently 58 bits on
x86_64.
A new config CONFIG_PTE_MARKER is introduced too; it's by default off. A
bunch of helpers are defined altogether to service the rest of the pte
marker code.
[peterx@redhat.com: fixup]
Link: https://lkml.kernel.org/r/Yk2rdB7SXZf+2BDF@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014646.13522-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220405014646.13522-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To spread dirty pages, nodes are checked whether they have reached the
dirty limit using the expensive node_dirty_ok(). To reduce the frequency
of calling node_dirty_ok(), the last node that hit the dirty limit can be
cached.
Instead of caching the node, caching both the node and its node_dirty_ok()
status can reduce the number of calle to node_dirty_ok().
[akpm@linux-foundation.org: rename last_pgdat_dirty_limit to last_pgdat_dirty_ok]
Link: https://lkml.kernel.org/r/20220430011032.64071-1-vvghjk1234@gmail.com
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Donghyeok Kim <dthex5d@gmail.com>
Cc: JaeSang Yoo <jsyoo5b@gmail.com>
Cc: Jiyoup Kim <lakroforce@gmail.com>
Cc: Ohhoon Kwon <ohkwon1043@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM reads the user input parameters only when it starts. To
allow more efficient online tuning, this commit implements a new input
parameter called 'commit_inputs'. Writing true to the parameter makes
DAMON_RECLAIM reads the input parameters again.
Link: https://lkml.kernel.org/r/20220429160606.127307-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, DAMON sysfs interface doesn't provide a way for adjusting DAMON
input parameters while it is turned on. Therefore, users who want to
reconfigure DAMON need to stop DAMON and restart. This means all the
monitoring results that accumulated so far, which could be useful, should
be flushed. This would be inefficient for many cases.
For an example, let's suppose a sysadmin was running a DAMON-based
Operation Scheme to find memory regions not accessed for more than 5 mins
and page out the regions. If it turns out the 5 mins threshold was too
long and therefore the sysadmin wants to reduce it to 4 mins, the sysadmin
should turn off DAMON, restart it, and wait for at least 4 more minutes so
that DAMON can find the cold memory regions, even though DAMON was knowing
there are regions that not accessed for 4 mins at the time of shutdown.
This commit makes DAMON sysfs interface to support online DAMON input
parameters updates by adding a new input keyword for the 'state' DAMON
sysfs file, 'commit'. Writing the keyword to the 'state' file while the
corresponding kdamond is running makes the kdamond to read the sysfs file
values again and update the DAMON context.
Link: https://lkml.kernel.org/r/20220429160606.127307-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Only '->kdamond' and '->kdamond_stop' are protected by 'kdamond_lock' of
'struct damon_ctx'. All other DAMON context internal data items are
recommended to be accessed in DAMON callbacks, or under some additional
synchronizations. But, DAMON sysfs is accessing the schemes stat under
'kdamond_lock'.
It makes no big issue as the read values are not used anywhere inside
kernel, but would better to be fixed. This commit moves the reads to
DAMON callback context, as supposed to be used for the purpose.
Link: https://lkml.kernel.org/r/20220429160606.127307-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs 'state' file handling code is using string literals in both
'state_show()' and 'state_store()'. This makes the code error prone and
inflexible for future extensions.
To improve the situation, this commit defines possible input strings and
'enum' for identifying each input keyword only once, and refactors the
code to reuse those.
Link: https://lkml.kernel.org/r/20220429160606.127307-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'damon_set_regions()' is general enough so that it can also be used for
only creating regions. This commit makes DAMON sysfs interface to reuse
the function rather keeping two implementations for a same purpose.
Link: https://lkml.kernel.org/r/20220429160606.127307-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit separates DAMON sysfs interface's monitoring context targets
setup code to a new function for better readability.
Link: https://lkml.kernel.org/r/20220429160606.127307-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Having multiple targets for physical address space monitoring makes no
sense. This commit prohibits such a ridiculous DAMON context setup my
making the DAMON context build function to check and return an error for
the case.
Link: https://lkml.kernel.org/r/20220429160606.127307-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'damon_va_apply_three_regions()' is just a wrapper of its general version,
'damon_set_regions()'. This commit replaces the wrapper calls to directly
call the general version.
Link: https://lkml.kernel.org/r/20220429160606.127307-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit moves 'damon_set_regions()' from vaddr to core, as it is aimed
to be used by not only 'vaddr' but also other parts of DAMON.
Link: https://lkml.kernel.org/r/20220429160606.127307-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'damon_va_apply_three_regions()' is for adjusting address ranges to fit in
three discontiguous ranges. The function can be generalized for arbitrary
number of discontiguous ranges and reused for future usage, such as
arbitrary online regions update. For such future usage, this commit
introduces a generalized version of the function called
'damon_set_regions()'.
Link: https://lkml.kernel.org/r/20220429160606.127307-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When 'after_sampling()' or 'after_aggregation()' DAMON callbacks return an
error, kdamond continues the remaining loop once. It makes no much sense
to run the remaining part while something wrong already happened. The
context might be corrupted or having invalid data. This commit therefore
makes kdamond skips the remaining works and immediately finish in the
cases.
Link: https://lkml.kernel.org/r/20220429160606.127307-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: Support online tuning".
Effects of DAMON and DAMON-based Operation Schemes highly depends on the
configurations. Wrong configurations could even result in unexpected
efficiency degradations. For finding a best configuration, repeating
incremental configuration changes and results measurements, in other
words, online tuning, could be helpful.
Nevertheless, DAMON kernel API supports only restrictive online tuning.
Worse yet, the sysfs-based DAMON user interface doesn't support online
tuning at all. DAMON_RECLAIM also doesn't support online tuning.
This patchset makes the DAMON kernel API, DAMON sysfs interface, and
DAMON_RECLAIM supports online tuning.
Sequence of patches
-------------------
First two patches enhance DAMON online tuning for kernel API users.
Specifically, patch 1 let kernel API users to be able to do DAMON online
tuning without a restriction, and patch 2 makes error handling easier.
Following seven patches (patches 3-9) refactor code for better readability
and easier reuse of code fragments that will be useful for online tuning
support.
Patch 10 introduces DAMON callback based user request handling structure
for DAMON sysfs interface, and patch 11 enables DAMON online tuning via
DAMON sysfs interface. Documentation patch (patch 12) for usage of it
follows.
Patch 13 enables online tuning of DAMON_RECLAIM and finally patch 14
documents the DAMON_RECLAIM online tuning usage.
This patch (of 14):
For updating input parameters for running DAMON contexts, DAMON kernel API
users can use the contexts' callbacks, as it is the safe place for context
internal data accesses. When the context has DAMON-based operation
schemes and all schemes are deactivated due to their watermarks, however,
DAMON does nothing but only watermarks checks. As a result, no callbacks
will be called back, and therefore the kernel API users cannot update the
input parameters including monitoring attributes, DAMON-based operation
schemes, and watermarks.
To let users easily update such DAMON input parameters in such a case,
this commit adds a new callback, 'after_wmarks_check()'. It will be
called after each watermarks check. Users can do the online input
parameters update in the callback even under the schemes deactivated case.
Link: https://lkml.kernel.org/r/20220429160606.127307-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit c1e8d7c6a7 ("mmap locking API: convert mmap_sem comments") missed
replacing some references of mmap_sem by mmap_lock due to misspelling
(mm_sem instead of mmap_sem).
Link: https://lkml.kernel.org/r/20220503113333.214124-1-mail@florommel.de
Signed-off-by: Florian Rommel <mail@florommel.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_KASAN_HW_TAGS is enabled we currently increase the minimum
slab alignment to 16. This happens even if MTE is not supported in
hardware or disabled via kasan=off, which creates an unnecessary memory
overhead in those cases. Eliminate this overhead by making the minimum
slab alignment a runtime property and only aligning to 16 if KASAN is
enabled at runtime.
On a DragonBoard 845c (non-MTE hardware) with a kernel built with
CONFIG_KASAN_HW_TAGS, waiting for quiescence after a full Android boot I
see the following Slab measurements in /proc/meminfo (median of 3
reboots):
Before: 169020 kB
After: 167304 kB
[akpm@linux-foundation.org: make slab alignment type `unsigned int' to avoid casting]
Link: https://linux-review.googlesource.com/id/I752e725179b43b144153f4b6f584ceb646473ead
Link: https://lkml.kernel.org/r/20220427195820.1716975-2-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now we will use flush_cache_page() to flush cache for anonymous hugetlb
pages when unmapping or migrating a hugetlb page mapping, but the
flush_cache_page() only handles a PAGE_SIZE range on some architectures
(like arm32, arc and so on), which will cause potential cache issues.
Thus change to use flush_cache_range() to cover the whole size of a
hugetlb page.
Link: https://lkml.kernel.org/r/dc903b378d1e2d26bbbe85409ab9d009631f175c.1651056365.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The cache level flush will always be first when changing an existing
virtual–>physical mapping to a new value, since this allows us to
properly handle systems whose caches are strict and require a
virtual–>physical translation to exist for a virtual address. So we
should move the cache flushing before huge_pmd_unshare().
As Muchun pointed out[1], now the architectures whose supporting hugetlb
PMD sharing have no cache flush issues in practice. But I think we should
still follow the cache/TLB flushing rules when changing a valid virtual
address mapping in case of potential issues in future.
[1] https://lore.kernel.org/all/YmT%2F%2FhuUbFX+KHcy@FVFYT0MHHV2J.usts.net/
Link: https://lkml.kernel.org/r/4f7ae6dfdc838ab71e1655188b657c032ff1f28f.1651056365.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patchset fixes some cache flushing issues if PMD sharing is possible
for hugetlb pages, which were found by code inspection. Meanwhile Mike
found the flush_cache_page() can not cover the whole size of a hugetlb
page on some architectures [1], so I added a new patch 3 to fix this
issue, since I found only try_to_unmap_one() and try_to_migrate_one() need
to fix after some investigation.
[1] https://lore.kernel.org/linux-mm/064da3bb-5b4b-7332-a722-c5a541128705@oracle.com/
This patch (of 3):
When moving hugetlb page tables, the cache flushing is called in
move_page_tables() without considering the shared PMDs, which may be cause
cache issues on some architectures.
Thus we should move the hugetlb cache flushing into
move_hugetlb_page_tables() with considering the shared PMDs ranges,
calculated by adjust_range_if_pmd_sharing_possible(). Meanwhile also
expanding the TLBs flushing range in case of shared PMDs.
Note this is discovered via code inspection, and did not meet a real
problem in practice so far.
Link: https://lkml.kernel.org/r/cover.1651056365.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/0443c8cf20db554d3ff4b439b30e0ff26c0181dd.1651056365.git.baolin.wang@linux.alibaba.com
Fixes: 550a7d60bd ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pgprot.pgprot is non-portable code. It should be replaced by portable
macro pgprot_val.
Link: https://lkml.kernel.org/r/20220426071302.220646-1-liusongtang@huawei.com
Signed-off-by: liusongtang <liusongtang@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON sysfs interface to support the fixed virtual
address ranges monitoring. After this commit, writing 'fvaddr' to the
'operations' DAMON sysfs file makes DAMON uses the monitoring operations
set for fixed virtual address ranges, so that users can monitor accesses
to only interested virtual address ranges.
[sj@kernel.org: fix pid leak under fvaddr ops use case]
Link: https://lkml.kernel.org/r/20220503220531.45913-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426231750.48822-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "support fixed virtual address ranges monitoring".
The monitoring operations set for virtual address spaces automatically
updates the monitoring target regions to cover entire mappings of the
virtual address spaces as much as possible. Some users could have more
information about their programs than kernel and therefore have interest
in not entire regions but only specific regions. For such cases, the
automatic monitoring target regions updates are only unnecessary overhead
or distractions.
This patchset adds supports for the use case on DAMON's kernel API
(DAMON_OPS_FVADDR) and sysfs interface ('fvaddr' keyword for 'operations'
sysfs file).
This patch (of 3):
The monitoring operations set for virtual address spaces automatically
updates the monitoring target regions to cover entire mappings of the
virtual address spaces as much as possible. Some users could have more
information about their programs than kernel and therefore have interest
in not entire regions but only specific regions. For such cases, the
automatic monitoring target regions updates are only unnecessary overheads
or distractions.
For such cases, DAMON's API users can simply set the '->init()' and
'->update()' of the DAMON context's '->ops' NULL, and set the target
monitoring regions when creating the context. But, that would be a dirty
hack. Worse yet, the hack is unavailable for DAMON user space interface
users.
To support the use case in a clean way that can easily exported to the
user space, this commit adds another monitoring operations set called
'fvaddr', which is same to 'vaddr' but does not automatically update the
monitoring regions. Instead, it will only respect the virtual address
regions which have explicitly passed at the initial context creation.
Note that this commit leave sysfs interface not supporting the feature
yet. The support will be made in a following commit.
Link: https://lkml.kernel.org/r/20220426231750.48822-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426231750.48822-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON programming interface users can know if specific monitoring ops set
is registered or not using 'damon_is_registered_ops()', but there is no
such method for the user space. To help the case, this commit adds a new
DAMON sysfs file called 'avail_operations' under each context directory
for listing available monitoring ops. Reading the file will list each
registered monitoring ops on each line.
Link: https://lkml.kernel.org/r/20220426203843.45238-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
