The reflink code is quite large and has been living in ioctl.c since ever.
It has grown over the years after many bug fixes and improvements, and
since I'm planning on making some further improvements on it, it's time
to get it better organized by moving into its own file, reflink.c
(similar to what xfs does for example).
This change only moves the code out of ioctl.c into the new file, it
doesn't do any other change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no point to inform the user about size change if there's none.
Update the message to conform to a commonly used format where the path
and devid are printed and also print old and new sizes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Marcos Paulo de Souza <marcos@mpdesouza.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance message ]
Signed-off-by: David Sterba <dsterba@suse.com>
This patch removes all haphazard code implementing nocow writers
exclusion from pending snapshot creation and switches to using the drew
lock to ensure this invariant still holds.
'Readers' are snapshot creators from create_snapshot and 'writers' are
nocow writers from buffered write path or btrfs_setsize. This locking
scheme allows for multiple snapshots to happen while any nocow writers
are blocked, since writes to page cache in the nocow path will make
snapshots inconsistent.
So for performance reasons we'd like to have the ability to run multiple
concurrent snapshots and also favors readers in this case. And in case
there aren't pending snapshots (which will be the majority of the cases)
we rely on the percpu's writers counter to avoid cacheline contention.
The main gain from using the drew lock is it's now a lot easier to
reason about the guarantees of the locking scheme and whether there is
some silent breakage lurking.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This ioctl will be responsible for deleting a subvolume using its id.
This can be used when a system has a file system mounted from a
subvolume, rather than the root file system, like below:
/
@subvol1/
@subvol2/
@subvol_default/
If only @subvol_default is mounted, we have no path to reach @subvol1
and @subvol2, thus no way to delete them. Current subvolume delete ioctl
takes a file handle point as argument, and if @subvol_default is
mounted, we can't reach @subvol1 and @subvol2 from the same mount point.
This patch introduces a new ioctl BTRFS_IOC_SNAP_DESTROY_V2 that takes
the extended structure with flags to allow to delete subvolume using
subvolid.
Now, we can use this new ioctl specifying the subvolume id and refer to
the same mount point. It doesn't matter which subvolume was mounted,
since we can reach to the desired one using the subvolume id, and then
delete it.
The full path to the subvolume id is resolved internally and access is
verified as if the subvolume was accessed by path.
The volume args v2 structure is extended to use the existing union for
subvolume id specification, that's valid in case the
BTRFS_SUBVOL_SPEC_BY_ID is set.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
When the device remove v2 ioctl was added, the full support mask was
added to sanity check the flags. However this would allow to let the
subvolume related flags to be accepted. This is not supposed to happen.
Use the correct support mask, which means that now any of
BTRFS_SUBVOL_CREATE_ASYNC, BTRFS_SUBVOL_RDONLY or
BTRFS_SUBVOL_QGROUP_INHERIT will be rejected as ENOTSUPP. Though this is
a user-visible change, specifying subvolume flags for device deletion
does not make sense and there are hopefully no applications doing that.
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using the defined mask instead of flag enumeration in the ioctl handler
is preferred. No functional changes.
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are now using these for all roots, rename them to btrfs_put_root()
and btrfs_grab_root();
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all callers of btrfs_get_fs_root are subsequently calling
btrfs_grab_fs_root and handling dropping the ref when they are done
appropriately, go ahead and push btrfs_grab_fs_root up into
btrfs_get_fs_root.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We create the snapshot and then use it for a bunch of things, we need to
hold a ref on it while we're messing with it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We look up an arbitrary fs root here, we need to hold a ref on the root
for the duration.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We look up whatever root userspace has given us, we need to hold a ref
throughout this operation. Use 'root' only for the on fs root and not as
a temporary variable elsewhere.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can wander into a different root, so grab a ref on the root we look
up. Later on we make root = fs_info->tree_root so we need this separate
out label to make sure we do the right cleanup only in the case we're
looking up a different root.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We look up an arbitrary fs root, we need to hold a ref on it while we're
doing our search.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We lookup a arbitrary fs root, we need to hold a ref on that root. If
we're using our own inodes root then grab a ref on that as well to make
the cleanup easier.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're creating the new root here, but we should hold the ref until after
we've initialized the inode for it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All this does is call btrfs_get_fs_root() with check_ref == true. Just
use btrfs_get_fs_root() so we don't have a bunch of different helpers
that do the same thing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have a safe way to update the i_size, replace all uses of
btrfs_ordered_update_i_size with btrfs_inode_safe_disk_i_size_write.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were using btrfs_i_size_write(), which unconditionally jacks up
inode->disk_i_size. However since clone can operate on ranges we could
have pending ordered extents for a range prior to the start of our clone
operation and thus increase disk_i_size too far and have a hole with no
file extent.
Fix this by using the btrfs_ordered_update_i_size helper which will do
the right thing in the face of pending ordered extents outside of our
clone range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=FGXQ
-----END PGP SIGNATURE-----
Merge tag 'fs-dedupe-last-block-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull fs deduplication fix from David Sterba:
"This is a fix for deduplication bug: the last block of two files is
allowed to deduplicated. This got broken in 5.1 by lifting some
generic checks to VFS layer. The affected filesystems are btrfs and
xfs.
The patches are marked for stable as the bug decreases deduplication
effectivity"
* tag 'fs-dedupe-last-block-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: make deduplication with range including the last block work
fs: allow deduplication of eof block into the end of the destination file
Since btrfs was migrated to use the generic VFS helpers for clone and
deduplication, it stopped allowing for the last block of a file to be
deduplicated when the source file size is not sector size aligned (when
eof is somewhere in the middle of the last block). There are two reasons
for that:
1) The generic code always rounds down, to a multiple of the block size,
the range's length for deduplications. This means we end up never
deduplicating the last block when the eof is not block size aligned,
even for the safe case where the destination range's end offset matches
the destination file's size. That rounding down operation is done at
generic_remap_check_len();
2) Because of that, the btrfs specific code does not expect anymore any
non-aligned range length's for deduplication and therefore does not
work if such nona-aligned length is given.
This patch addresses that second part, and it depends on a patch that
fixes generic_remap_check_len(), in the VFS, which was submitted ealier
and has the following subject:
"fs: allow deduplication of eof block into the end of the destination file"
These two patches address reports from users that started seeing lower
deduplication rates due to the last block never being deduplicated when
the file size is not aligned to the filesystem's block size.
Link: https://lore.kernel.org/linux-btrfs/2019-1576167349.500456@svIo.N5dq.dFFD/
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only pass this as 1 from __extent_writepage_io(). The parameter
basically means "pretend I didn't pass in a page". This is silly since
we can simply not pass in the page. Get rid of the parameter from
btrfs_get_extent(), and since it's used as a get_extent_t callback,
remove it from get_extent_t and btree_get_extent(), neither of which
need it.
While we're here, let's document btrfs_get_extent().
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If scrub returns an error we are not copying back the scrub arguments
structure to user space. This prevents user space to know how much
progress scrub has done if an error happened - this includes -ECANCELED
which is returned when users ask for scrub to stop. A particular use
case, which is used in btrfs-progs, is to resume scrub after it is
canceled, in that case it relies on checking the progress from the scrub
arguments structure and then use that progress in a call to resume
scrub.
So fix this by always copying the scrub arguments structure to user
space, overwriting the value returned to user space with -EFAULT only if
copying the structure failed to let user space know that either that
copying did not happen, and therefore the structure is stale, or it
happened partially and the structure is probably not valid and corrupt
due to the partial copy.
Reported-by: Graham Cobb <g.btrfs@cobb.uk.net>
Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/
Fixes: 06fe39ab15 ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Graham Cobb <g.btrfs@cobb.uk.net>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can just abort the transaction here, and in fact do that for every
other failure in this function except these two cases.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Normally when cloning a file range if we find an implicit hole at the end
of the range we assume it is because the NO_HOLES feature is enabled.
However that is not always the case. One well known case [1] is when we
have a power failure after mixing buffered and direct IO writes against
the same file.
In such cases we need to punch a hole in the destination file, and if
the NO_HOLES feature is not enabled, we need to insert explicit file
extent items to represent the hole. After commit 690a5dbfc5
("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning
extents"), we started to insert file extent items representing the hole
with an item size of 0, which is invalid and should be 53 bytes (the size
of a btrfs_file_extent_item structure), resulting in all sorts of
corruptions and invalid memory accesses. This is detected by the tree
checker when we attempt to write a leaf to disk.
The problem can be sporadically triggered by test case generic/561 from
fstests. That test case does not exercise power failure and creates a new
filesystem when it starts, so it does not use a filesystem created by any
previous test that tests power failure. However the test does both
buffered and direct IO writes (through fsstress) and it's precisely that
which is creating the implicit holes in files. That happens even before
the commit mentioned earlier. I need to investigate why we get those
implicit holes to check if there is a real problem or not. For now this
change fixes the regression of introducing file extent items with an item
size of 0 bytes.
Fix the issue by calling btrfs_punch_hole_range() without passing a
btrfs_clone_extent_info structure, which ensures file extent items are
inserted to represent the hole with a correct item size. We were passing
a btrfs_clone_extent_info with a value of 0 for its 'item_size' field,
which was causing the insertion of file extent items with an item size
of 0.
[1] https://www.spinics.net/lists/linux-btrfs/msg75350.html
Reported-by: David Sterba <dsterba@suse.com>
Fixes: 690a5dbfc5 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The on-disk format of block group item makes use of the key that stores
the offset and length. This is further used in the code, although this
makes thing harder to understand. The key is also packed so the
offset/length is not properly aligned as u64.
Add start (key.objectid) and length (key.offset) members to block group
and remove the embedded key. When the item is searched or written, a
local variable for key is used.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For unknown reasons, the member 'used' in the block group struct is
stored in the b-tree item and accessed everywhere using the special
accessor helper. Let's unify it and make it a regular member and only
update the item before writing it to the tree.
The item is still being used for flags and chunk_objectid, there's some
duplication until the item is removed in following patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some functions are doing some unnecessary indirection to reach the
btrfs_fs_info struct. Change these functions to receive a btrfs_fs_info
struct instead of a *file.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compression type upper limit constant is the same as the last value
and this is confusing. In order to keep coding style consistent, use
BTRFS_NR_COMPRESS_TYPES as the total number that follows the idom of
'NR' being one more than the last value.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The attribute is more relaxed than const and the functions could
dereference pointers, as long as the observable state is not changed. We
do have such functions, based on -Wsuggest-attribute=pure .
The visible effects of this patch are negligible, there are differences
in the assembly but hard to summarize.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter is now always set to NULL and could be dropped. The last
user was get_default_root but that got reworked in 05dbe6837b ("Btrfs:
unify subvol= and subvolid= mounting") and the parameter became unused.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The two ioctls START_SYNC and WAIT_SYNC were mistakenly marked as
deprecated and scheduled for removal but we actualy do use them for
'btrfs subvolume delete -C/-c'. The deprecated thing in ebc87351e5
should have been just the async flag for subvolume creation.
The deprecation has been added in this development cycle, remove it
until it's time.
Fixes: ebc87351e5 ("btrfs: Deprecate BTRFS_SUBVOL_CREATE_ASYNC flag")
Signed-off-by: David Sterba <dsterba@suse.com>
[Background]
Btrfs qgroup uses two types of reserved space for METADATA space,
PERTRANS and PREALLOC.
PERTRANS is metadata space reserved for each transaction started by
btrfs_start_transaction().
While PREALLOC is for delalloc, where we reserve space before joining a
transaction, and finally it will be converted to PERTRANS after the
writeback is done.
[Inconsistency]
However there is inconsistency in how we handle PREALLOC metadata space.
The most obvious one is:
In btrfs_buffered_write():
btrfs_delalloc_release_extents(BTRFS_I(inode), reserve_bytes, true);
We always free qgroup PREALLOC meta space.
While in btrfs_truncate_block():
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, (ret != 0));
We only free qgroup PREALLOC meta space when something went wrong.
[The Correct Behavior]
The correct behavior should be the one in btrfs_buffered_write(), we
should always free PREALLOC metadata space.
The reason is, the btrfs_delalloc_* mechanism works by:
- Reserve metadata first, even it's not necessary
In btrfs_delalloc_reserve_metadata()
- Free the unused metadata space
Normally in:
btrfs_delalloc_release_extents()
|- btrfs_inode_rsv_release()
Here we do calculation on whether we should release or not.
E.g. for 64K buffered write, the metadata rsv works like:
/* The first page */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=0
total: num_bytes=calc_inode_reservations()
/* The first page caused one outstanding extent, thus needs metadata
rsv */
/* The 2nd page */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=calc_inode_reservations()
total: not changed
/* The 2nd page doesn't cause new outstanding extent, needs no new meta
rsv, so we free what we have reserved */
/* The 3rd~16th pages */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=calc_inode_reservations()
total: not changed (still space for one outstanding extent)
This means, if btrfs_delalloc_release_extents() determines to free some
space, then those space should be freed NOW.
So for qgroup, we should call btrfs_qgroup_free_meta_prealloc() other
than btrfs_qgroup_convert_reserved_meta().
The good news is:
- The callers are not that hot
The hottest caller is in btrfs_buffered_write(), which is already
fixed by commit 336a8bb8e3 ("btrfs: Fix wrong
btrfs_delalloc_release_extents parameter"). Thus it's not that
easy to cause false EDQUOT.
- The trans commit in advance for qgroup would hide the bug
Since commit f5fef45936 ("btrfs: qgroup: Make qgroup async transaction
commit more aggressive"), when btrfs qgroup metadata free space is slow,
it will try to commit transaction and free the wrongly converted
PERTRANS space, so it's not that easy to hit such bug.
[FIX]
So to fix the problem, remove the @qgroup_free parameter for
btrfs_delalloc_release_extents(), and always pass true to
btrfs_inode_rsv_release().
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 43b18595d6 ("btrfs: qgroup: Use separate meta reservation type for delalloc")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit fee187d9d9 ("Btrfs: do not set EXTENT_DIRTY along with
EXTENT_DELALLOC"), we never set EXTENT_DIRTY in inode->io_tree, so we
can simplify and stop trying to clear it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Support for asynchronous snapshot creation was originally added in
72fd032e94 ("Btrfs: add SNAP_CREATE_ASYNC ioctl") to cater for
ceph's backend needs. However, since Ceph has deprecated support for
btrfs there is no longer need for that support in btrfs. Additionally,
this was never supported by btrfs-progs, the official userspace tools.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is prep work for moving all of the block group cache code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
The bulk of the work done when cloning extents, at ioctl.c:btrfs_clone(),
is done inside an if statement that checks if the found key has the type
BTRFS_EXTENT_DATA_KEY. That if statement is redundant however, because
btrfs_search_slot() always leaves us in a leaf slot that points to a key
that is always greater then or equals to the search key, and our search
key here has that type, and because we bail out before that if statement
if the key at the given leaf slot is greater then BTRFS_EXTENT_DATA_KEY.
Therefore just remove that if statement, not only because it is useless
but mostly because it increases the nesting/indentation level in this
function which is quite big and makes things a bit awkward whenever I need
to fix something that requires changing btrfs_clone() (and it has been
like that for many years already).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I lifted the btrfs label get/set ioctls to the vfs some time ago, but
never followed up to use those common definitions directly in btrfs.
This patch does that.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When cloning extents (or deduplicating) we create a transaction with a
space reservation that considers we will drop or update a single file
extent item of the destination inode (that we modify a single leaf). That
is fine for the vast majority of scenarios, however it might happen that
we need to drop many file extent items, and adjust at most two file extent
items, in the destination root, which can span multiple leafs. This will
lead to either the call to btrfs_drop_extents() to fail with ENOSPC or
the subsequent calls to btrfs_insert_empty_item() or btrfs_update_inode()
(called through clone_finish_inode_update()) to fail with ENOSPC. Such
failure results in a transaction abort, leaving the filesystem in a
read-only mode.
In order to fix this we need to follow the same approach as the hole
punching code, where we create a local reservation with 1 unit and keep
ending and starting transactions, after balancing the btree inode,
when __btrfs_drop_extents() returns ENOSPC. So fix this by making the
extent cloning call calls the recently added btrfs_punch_hole_range()
helper, which is what does the mentioned work for hole punching, and
make sure whenever we drop extent items in a transaction, we also add a
replacing file extent item, to avoid corruption (a hole) if after ending
a transaction and before starting a new one, the old transaction gets
committed and a power failure happens before we finish cloning.
A test case for fstests follows soon.
Reported-by: David Goodwin <david@codepoets.co.uk>
Link: https://lore.kernel.org/linux-btrfs/a4a4cf31-9cf4-e52c-1f86-c62d336c9cd1@codepoets.co.uk/
Reported-by: Sam Tygier <sam@tygier.co.uk>
Link: https://lore.kernel.org/linux-btrfs/82aace9f-a1e3-1f0b-055f-3ea75f7a41a0@tygier.co.uk/
Fixes: b6f3409b21 ("Btrfs: reserve sufficient space for ioctl clone")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=eshk
-----END PGP SIGNATURE-----
Merge tag 'for-5.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Highlights:
- chunks that have been trimmed and unchanged since last mount are
tracked and skipped on repeated trims
- use hw assissed crc32c on more arches, speedups if native
instructions or optimized implementation is available
- the RAID56 incompat bit is automatically removed when the last
block group of that type is removed
Fixes:
- fsync fix for reflink on NODATACOW files that could lead to ENOSPC
- fix data loss after inode eviction, renaming it, and fsync it
- fix fsync not persisting dentry deletions due to inode evictions
- update ctime/mtime/iversion after hole punching
- fix compression type validation (reported by KASAN)
- send won't be allowed to start when relocation is in progress, this
can cause spurious errors or produce incorrect send stream
Core:
- new tracepoints for space update
- tree-checker: better check for end of extents for some tree items
- preparatory work for more checksum algorithms
- run delayed iput at unlink time and don't push the work to cleaner
thread where it's not properly throttled
- wrap block mapping to structures and helpers, base for further
refactoring
- split large files, part 1:
- space info handling
- block group reservations
- delayed refs
- delayed allocation
- other cleanups and refactoring"
* tag 'for-5.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (103 commits)
btrfs: fix memory leak of path on error return path
btrfs: move the subvolume reservation stuff out of extent-tree.c
btrfs: migrate the delalloc space stuff to it's own home
btrfs: migrate btrfs_trans_release_chunk_metadata
btrfs: migrate the delayed refs rsv code
btrfs: Evaluate io_tree in find_lock_delalloc_range()
btrfs: migrate the global_block_rsv helpers to block-rsv.c
btrfs: migrate the block-rsv code to block-rsv.c
btrfs: stop using block_rsv_release_bytes everywhere
btrfs: cleanup the target logic in __btrfs_block_rsv_release
btrfs: export __btrfs_block_rsv_release
btrfs: export btrfs_block_rsv_add_bytes
btrfs: move btrfs_block_rsv definitions into it's own header
btrfs: Simplify update of space_info in __reserve_metadata_bytes()
btrfs: unexport can_overcommit
btrfs: move reserve_metadata_bytes and supporting code to space-info.c
btrfs: move dump_space_info to space-info.c
btrfs: export block_rsv_use_bytes
btrfs: move btrfs_space_info_add_*_bytes to space-info.c
btrfs: move the space info update macro to space-info.h
...
- Standardize parameter checking for the SETFLAGS and FSSETXATTR ioctls
(which were the file attribute setters for ext4 and xfs and have now
been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories.
-----BEGIN PGP SIGNATURE-----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=uH2E
-----END PGP SIGNATURE-----
Merge tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong:
"Here's a patch series that sets up common parameter checking functions
for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations.
The goal here is to reduce the amount of behaviorial variance between
the filesystems where those ioctls originated (ext2 and XFS,
respectively) and everybody else.
- Standardize parameter checking for the SETFLAGS and FSSETXATTR
ioctls (which were the file attribute setters for ext4 and xfs and
have now been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories"
* tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: only allow FSSETXATTR to set DAX flag on files and dirs
vfs: teach vfs_ioc_fssetxattr_check to check extent size hints
vfs: teach vfs_ioc_fssetxattr_check to check project id info
vfs: create a generic checking function for FS_IOC_FSSETXATTR
vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
We have code for data and metadata reservations for delalloc. There's
quite a bit of code here, and it's used in a lot of places so I've
separated it out to it's own file. inode.c and file.c are already
pretty large, and this code is complicated enough to live in its own
space.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Migrate the struct definition and the one helper that's in ctree.h into
space-info.h
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Create a generic checking function for the incoming FS_IOC_FSSETXATTR
fsxattr values so that we can standardize some of the implementation
behaviors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Create a generic function to check incoming FS_IOC_SETFLAGS flag values
and later prepare the inode for updates so that we can standardize the
implementations that follow ext4's flag values.
Note that the efivarfs implementation no longer fails a no-op SETFLAGS
without CAP_LINUX_IMMUTABLE since that's the behavior in ext*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
[BUG]
The following script can cause unexpected fsync failure:
#!/bin/bash
dev=/dev/test/test
mnt=/mnt/btrfs
mkfs.btrfs -f $dev -b 512M > /dev/null
mount $dev $mnt -o nospace_cache
# Prealloc one extent
xfs_io -f -c "falloc 8k 64m" $mnt/file1
# Fill the remaining data space
xfs_io -f -c "pwrite 0 -b 4k 512M" $mnt/padding
sync
# Write into the prealloc extent
xfs_io -c "pwrite 1m 16m" $mnt/file1
# Reflink then fsync, fsync would fail due to ENOSPC
xfs_io -c "reflink $mnt/file1 8k 0 4k" -c "fsync" $mnt/file1
umount $dev
The fsync fails with ENOSPC, and the last page of the buffered write is
lost.
[CAUSE]
This is caused by:
- Btrfs' back reference only has extent level granularity
So write into shared extent must be COWed even only part of the extent
is shared.
So for above script we have:
- fallocate
Create a preallocated extent where we can do NOCOW write.
- fill all the remaining data and unallocated space
- buffered write into preallocated space
As we have not enough space available for data and the extent is not
shared (yet) we fall into NOCOW mode.
- reflink
Now part of the large preallocated extent is shared, later write
into that extent must be COWed.
- fsync triggers writeback
But now the extent is shared and therefore we must fallback into COW
mode, which fails with ENOSPC since there's not enough space to
allocate data extents.
[WORKAROUND]
The workaround is to ensure any buffered write in the related extents
(not just the reflink source range) get flushed before reflink/dedupe,
so that NOCOW writes succeed that happened before reflinking succeed.
The workaround is expensive, we could do it better by only flushing
NOCOW range, but that needs extra accounting for NOCOW range.
For now, fix the possible data loss first.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This will allow generating fsnotify delete events after the
fsnotify_nameremove() hook is removed from d_delete().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
After the recent series of cleanups in the properties and xattrs modules
that landed in the 5.2 merge window, we ended up with a regression where
after deleting the compression xattr property through the setflags ioctl,
we don't set the BTRFS_INODE_COPY_EVERYTHING flag in the inode anymore.
As a consequence, if the inode was fsync'ed when it had the compression
property set, after deleting the compression property through the setflags
ioctl and fsync'ing again the inode, the log will still contain the
compression xattr, because the inode did not had that bit set, which
made the fsync not delete all xattrs from the log and copy all xattrs
from the subvolume tree to the log tree.
This regression happens due to the fact that that series of cleanups
made btrfs_set_prop() call the old function do_setxattr() (which is now
named btrfs_setxattr()), and not the old version of btrfs_setxattr(),
which is now called btrfs_setxattr_trans().
Fix this by setting the BTRFS_INODE_COPY_EVERYTHING bit in the current
btrfs_setxattr() function and remove it from everywhere else, including
its setup at btrfs_ioctl_setflags(). This is cleaner, avoids similar
regressions in the future, and centralizes the setup of the bit. After
all, the need to setup this bit should only be in the xattrs module,
since it is an implementation of xattrs.
Fixes: 04e6863b19 ("btrfs: split btrfs_setxattr calls regarding transaction")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There isn't real use of making struct inode::i_mode a local copy, it
saves a dereference one time, not much. Just use it directly.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_inode_flags_to_fsflags() is copied into @old_fsflags and used only
once. Instead used it directly.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of updating the binode::flags directly, update a local copy, and
then at the point of no error, store copy it to the binode::flags.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The patch ("btrfs: start transaction in btrfs_ioctl_setflags()") used
btrfs_set_prop() instead of btrfs_set_prop_trans() by which now the
inode::i_flags update functions such as
btrfs_sync_inode_flags_to_i_flags() and btrfs_update_inode() is called
in btrfs_ioctl_setflags() instead of
btrfs_set_prop_trans()->btrfs_setxattr() as earlier. So the
inode::i_flags remains unmodified until the thread has checked all the
conditions. So drop the saved inode::i_flags in out_i_flags.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inode attribute can be set through the FS_IOC_SETFLAGS ioctl. This
flags also includes compression attribute for which we would set/reset
the compression extended attribute. While doing this there is a bit of
duplicate code, the following things happens twice:
- start/end_transaction
- inode_inc_iversion()
- current_time update to inode->i_ctime
- and btrfs_update_inode()
These are updated both at btrfs_ioctl_setflags() and btrfs_set_props()
as well. This patch merges these two duplicate codes at
btrfs_ioctl_setflags().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation to merge multiple transactions when setting the
compression flags, split btrfs_set_props() validation part outside of
it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Send operates on read only trees and expects them to never change while it
is using them. This is part of its initial design, and this expection is
due to two different reasons:
1) When it was introduced, no operations were allowed to modifiy read-only
subvolumes/snapshots (including defrag for example).
2) It keeps send from having an impact on other filesystem operations.
Namely send does not need to keep locks on the trees nor needs to hold on
to transaction handles and delay transaction commits. This ends up being
a consequence of the former reason.
However the deduplication feature was introduced later (on September 2013,
while send was introduced in July 2012) and it allowed for deduplication
with destination files that belong to read-only trees (subvolumes and
snapshots).
That means that having a send operation (either full or incremental) running
in parallel with a deduplication that has the destination inode in one of
the trees used by the send operation, can result in tree nodes and leaves
getting freed and reused while send is using them. This problem is similar
to the problem solved for the root nodes getting freed and reused when a
snapshot is made against one tree that is currenly being used by a send
operation, fixed in commits [1] and [2]. These commits explain in detail
how the problem happens and the explanation is valid for any node or leaf
that is not the root of a tree as well. This problem was also discussed
and explained recently in a thread [3].
The problem is very easy to reproduce when using send with large trees
(snapshots) and just a few concurrent deduplication operations that target
files in the trees used by send. A stress test case is being sent for
fstests that triggers the issue easily. The most common error to hit is
the send ioctl return -EIO with the following messages in dmesg/syslog:
[1631617.204075] BTRFS error (device sdc): did not find backref in send_root. inode=63292, offset=0, disk_byte=5228134400 found extent=5228134400
[1631633.251754] BTRFS error (device sdc): parent transid verify failed on 32243712 wanted 24 found 27
The first one is very easy to hit while the second one happens much less
frequently, except for very large trees (in that test case, snapshots
with 100000 files having large xattrs to get deep and wide trees).
Less frequently, at least one BUG_ON can be hit:
[1631742.130080] ------------[ cut here ]------------
[1631742.130625] kernel BUG at fs/btrfs/ctree.c:1806!
[1631742.131188] invalid opcode: 0000 [#6] SMP DEBUG_PAGEALLOC PTI
[1631742.131726] CPU: 1 PID: 13394 Comm: btrfs Tainted: G B D W 5.0.0-rc8-btrfs-next-45 #1
[1631742.132265] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[1631742.133399] RIP: 0010:read_node_slot+0x122/0x130 [btrfs]
(...)
[1631742.135061] RSP: 0018:ffffb530021ebaa0 EFLAGS: 00010246
[1631742.135615] RAX: ffff93ac8912e000 RBX: 000000000000009d RCX: 0000000000000002
[1631742.136173] RDX: 000000000000009d RSI: ffff93ac564b0d08 RDI: ffff93ad5b48c000
[1631742.136759] RBP: ffffb530021ebb7d R08: 0000000000000001 R09: ffffb530021ebb7d
[1631742.137324] R10: ffffb530021eba70 R11: 0000000000000000 R12: ffff93ac87d0a708
[1631742.137900] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
[1631742.138455] FS: 00007f4cdb1528c0(0000) GS:ffff93ad76a80000(0000) knlGS:0000000000000000
[1631742.139010] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1631742.139568] CR2: 00007f5acb3d0420 CR3: 000000012be3e006 CR4: 00000000003606e0
[1631742.140131] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1631742.140719] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[1631742.141272] Call Trace:
[1631742.141826] ? do_raw_spin_unlock+0x49/0xc0
[1631742.142390] tree_advance+0x173/0x1d0 [btrfs]
[1631742.142948] btrfs_compare_trees+0x268/0x690 [btrfs]
[1631742.143533] ? process_extent+0x1070/0x1070 [btrfs]
[1631742.144088] btrfs_ioctl_send+0x1037/0x1270 [btrfs]
[1631742.144645] _btrfs_ioctl_send+0x80/0x110 [btrfs]
[1631742.145161] ? trace_sched_stick_numa+0xe0/0xe0
[1631742.145685] btrfs_ioctl+0x13fe/0x3120 [btrfs]
[1631742.146179] ? account_entity_enqueue+0xd3/0x100
[1631742.146662] ? reweight_entity+0x154/0x1a0
[1631742.147135] ? update_curr+0x20/0x2a0
[1631742.147593] ? check_preempt_wakeup+0x103/0x250
[1631742.148053] ? do_vfs_ioctl+0xa2/0x6f0
[1631742.148510] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[1631742.148942] do_vfs_ioctl+0xa2/0x6f0
[1631742.149361] ? __fget+0x113/0x200
[1631742.149767] ksys_ioctl+0x70/0x80
[1631742.150159] __x64_sys_ioctl+0x16/0x20
[1631742.150543] do_syscall_64+0x60/0x1b0
[1631742.150931] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[1631742.151326] RIP: 0033:0x7f4cd9f5add7
(...)
[1631742.152509] RSP: 002b:00007ffe91017708 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[1631742.152892] RAX: ffffffffffffffda RBX: 0000000000000105 RCX: 00007f4cd9f5add7
[1631742.153268] RDX: 00007ffe91017790 RSI: 0000000040489426 RDI: 0000000000000007
[1631742.153633] RBP: 0000000000000007 R08: 00007f4cd9e79700 R09: 00007f4cd9e79700
[1631742.153999] R10: 00007f4cd9e799d0 R11: 0000000000000202 R12: 0000000000000003
[1631742.154365] R13: 0000555dfae53020 R14: 0000000000000000 R15: 0000000000000001
(...)
[1631742.156696] ---[ end trace 5dac9f96dcc3fd6b ]---
That BUG_ON happens because while send is using a node, that node is COWed
by a concurrent deduplication, gets freed and gets reused as a leaf (because
a transaction commit happened in between), so when it attempts to read a
slot from the extent buffer, at ctree.c:read_node_slot(), the extent buffer
contents were wiped out and it now matches a leaf (which can even belong to
some other tree now), hitting the BUG_ON(level == 0).
Fix this concurrency issue by not allowing send and deduplication to run
in parallel if both operate on the same readonly trees, returning EAGAIN
to user space and logging an exlicit warning in dmesg/syslog.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=be6821f82c3cc36e026f5afd10249988852b35ea
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6f2f0b394b54e2b159ef969a0b5274e9bbf82ff2
[3] https://lore.kernel.org/linux-btrfs/CAL3q7H7iqSEEyFaEtpRZw3cp613y+4k2Q8b4W7mweR3tZA05bQ@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the new btrfs_ref structure and replace parameter list to clean up
the usage of owner and level to distinguish the extent types.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move code to make it more readable, so as locking and unlocking is
done in the same function. The generic checks that are now performed in
the locked section are unaffected.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_prop() takes transaction pointer as the first argument,
however in ioctl.c for the purpose of setting the compression property,
we call btrfs_set_prop() with NULL transaction pointer. Down in
the call chain btrfs_setxattr() starts transaction to update the
attribute and also to update the inode.
So for clarity, create btrfs_set_prop_trans() with no transaction
pointer as argument, in preparation to start transaction here instead of
doing it down the call chain at btrfs_setxattr().
Also now the btrfs_set_prop() is a static function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_prop() is a redirect to __btrfs_set_prop() with the
transaction handle equal to NULL. __btrfs_set_prop() in turn passes
this to do_setxattr() which then transaction is actually created.
Instead merge __btrfs_set_prop() to btrfs_set_prop(), and update the
caller with NULL argument.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whan a filesystem is mounted with the nologreplay mount option, which
requires it to be mounted in RO mode as well, we can not allow discard on
free space inside block groups, because log trees refer to extents that
are not pinned in a block group's free space cache (pinning the extents is
precisely the first phase of replaying a log tree).
So do not allow the fitrim ioctl to do anything when the filesystem is
mounted with the nologreplay option, because later it can be mounted RW
without that option, which causes log replay to happen and result in
either a failure to replay the log trees (leading to a mount failure), a
crash or some silent corruption.
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Fixes: 96da09192c ("btrfs: Introduce new mount option to disable tree log replay")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reflinking (clone/dedupe) and rename are operations that operate on two
inodes and therefore need to lock them in the same order to avoid ABBA
deadlocks. It happens that Btrfs' reflink implementation always locked
them in a different order from VFS's lock_two_nondirectories() helper,
which is used by the rename code in VFS, resulting in ABBA type deadlocks.
Btrfs' locking order:
static void btrfs_double_inode_lock(struct inode *inode1, struct inode *inode2)
{
if (inode1 < inode2)
swap(inode1, inode2);
inode_lock_nested(inode1, I_MUTEX_PARENT);
inode_lock_nested(inode2, I_MUTEX_CHILD);
}
VFS's locking order:
void lock_two_nondirectories(struct inode *inode1, struct inode *inode2)
{
if (inode1 > inode2)
swap(inode1, inode2);
if (inode1 && !S_ISDIR(inode1->i_mode))
inode_lock(inode1);
if (inode2 && !S_ISDIR(inode2->i_mode) && inode2 != inode1)
inode_lock_nested(inode2, I_MUTEX_NONDIR2);
}
Fix this by killing the btrfs helper function that does the double inode
locking and replace it with VFS's helper lock_two_nondirectories().
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Fixes: 416161db9b ("btrfs: offline dedupe")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Comparing the content of the pages in the range to deduplicate is now
done in generic_remap_checks called by the generic helper
generic_remap_file_range_prep(), which takes care of ensuring we do not
compare/deduplicate undefined data beyond a file's EOF (range from EOF
to the next block boundary). So remove these checks which are now
redundant.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both btrfs_find_device() and find_device() does the same thing except
that the latter does not take the seed device onto account in the device
scanning context. We can merge them.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_device() accepts fs_info as an argument and retrieves
fs_devices from fs_info.
Instead use fs_devices, so that this function can be used in non-mount
(during device scanning) context as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the check that verifies if both inodes have checksums disabled or
both have them enabled, from the clone and deduplication functions into
the new common helper btrfs_remap_file_range_prep().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_balance() failed we would overwrite the error
returned to user space with -EFAULT if the call to copy_to_user() failed
as well. Fix that by calling copy_to_user() only if btrfs_balance()
returned success or was canceled.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_dev_replace_by_ioctl() failed we would overwrite the
error returned to user space with -EFAULT if the call to copy_to_user()
failed as well. Fix that by calling copy_to_user() only if no error
happened before or a device replace operation was canceled.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Checking if either of the inodes corresponds to a swapfile is already
performed by generic_remap_file_range_prep(), so we do not need to do
it in the btrfs clone and deduplication functions.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/btrfs/ioctl.c: In function 'btrfs_extent_same':
fs/btrfs/ioctl.c:3260:6: warning:
variable 'num_pages' set but not used [-Wunused-but-set-variable]
It not used any more since commit 9ee8234e6220 ("Btrfs: use
generic_remap_file_range_prep() for cloning and deduplication")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_get_dev_stats() failed we would overwrite the error
returned to user space with -EFAULT if the call to copy_to_user() failed
as well. Fix that by calling copy_to_user() only if btrfs_get_dev_stats()
returned success.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_scrub_progress() failed we would overwrite the error
returned to user space with -EFAULT if the call to copy_to_user() failed
as well. Fix that by calling copy_to_user() only if btrfs_scrub_progress()
returned success.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If scrub returned an error and then the copy_to_user() call did not
succeed, we would overwrite the error returned by scrub with -EFAULT.
Fix that by calling copy_to_user() only if btrfs_scrub_dev() returned
success.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The recent rework that makes btrfs' remap_file_range operation use the
generic helper generic_remap_file_range_prep() introduced a race between
relocation and reflinking (for both cloning and deduplication) the file
extents between the source and destination inodes.
This happens because we no longer lock the source range anymore, and we do
not lock it anymore because we wait for direct IO writes and writeback to
complete early on the code path right after locking the inodes, which
guarantees no other file operations interfere with the reflinking. However
there is one exception which is relocation, since it replaces the byte
number of file extents items in the fs tree after locking the range the
file extent items represent. This is a problem because after finding each
file extent to clone in the fs tree, the reflink process copies the file
extent item into a local buffer, releases the search path, inserts new
file extent items in the destination range and then increments the
reference count for the extent mentioned in the file extent item that it
previously copied to the buffer. If right after copying the file extent
item into the buffer and releasing the path the relocation process
updates the file extent item to point to the new extent, the reflink
process ends up creating a delayed reference to increment the reference
count of the old extent, for which the relocation process already created
a delayed reference to drop it. This results in failure to run delayed
references because we will attempt to increment the count of a reference
that was already dropped. This is illustrated by the following diagram:
CPU 1 CPU 2
relocation is running
btrfs_clone_files()
btrfs_clone()
--> finds extent item
in source range
point to extent
at bytenr X
--> copies it into a
local buffer
--> releases path
replace_file_extents()
--> successfully locks the
range represented by
the file extent item
--> replaces disk_bytenr
field in the file
extent item with some
other value Y
--> creates delayed reference
to increment reference
count for extent at
bytenr Y
--> creates delayed reference
to drop the extent at
bytenr X
--> starts transaction
--> creates delayed
reference to
increment extent
at bytenr X
<delayed references are run, due to a transaction
commit for example, and the transaction is aborted
with -EIO because we attempt to increment reference
count for the extent at bytenr X after we freed it>
When this race is hit the running transaction ends up getting aborted with
an -EIO error and a trace like the following is produced:
[ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs]
(...)
[ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1
[ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs]
(...)
[ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202
[ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001
[ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000
[ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
[ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000
[ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548
[ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000
[ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0
[ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4382.564887] Call Trace:
[ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs]
[ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs]
[ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs]
[ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs]
[ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs]
[ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs]
[ 4382.568112] ? _raw_spin_unlock+0x24/0x30
[ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs]
[ 4382.569006] create_subvol+0x3c8/0x830 [btrfs]
[ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs]
[ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs]
[ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60
[ 4382.570822] ? __sb_start_write+0xd4/0x1c0
[ 4382.571262] ? mnt_want_write_file+0x24/0x50
[ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs]
[ 4382.572155] ? _copy_from_user+0x66/0x90
[ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs]
[ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs]
[ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570
[ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0
[ 4382.574379] ? _raw_spin_unlock+0x24/0x30
[ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0
[ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0
[ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[ 4382.576020] do_vfs_ioctl+0xa2/0x6f0
[ 4382.576405] ksys_ioctl+0x70/0x80
[ 4382.576776] __x64_sys_ioctl+0x16/0x20
[ 4382.577137] do_syscall_64+0x60/0x1b0
[ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
[ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7
[ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003
[ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044
[ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010
[ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050
[ 4382.580792] irq event stamp: 0
[ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null)
[ 4382.581441] hardirqs last disabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320
[ 4382.581772] softirqs last enabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320
[ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null)
[ 4382.582413] ---[ end trace d3c188e3e9367382 ]---
[ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure
[ 4382.624295] BTRFS info (device sdc): forced readonly
Fix this by locking the source range before searching for the file extent
items in the fs tree, since the relocation process will try to lock the
range a file extent item represents before updating it with the new extent
location.
Fixes: 34a28e3d77 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The recent rework that makes btrfs' remap_file_range operation use the
generic helper generic_remap_file_range_prep() introduced a race between
writeback and cloning a range that covers the eof extent of the source
file into a destination offset that is greater then the same file's size.
This happens because we now wait for writeback to complete before doing
the truncation of the eof block, while previously we did the truncation
and then waited for writeback to complete. This leads to a race between
writeback of the truncated block and cloning the file extents in the
source range, because we copy each file extent item we find in the fs
root into a buffer, then release the path and then increment the reference
count for the extent referred in that file extent item we copied, which
can no longer exist if writeback of the truncated eof block completes
after we copied the file extent item into the buffer and before we
incremented the reference count. This is illustrated by the following
diagram:
CPU 1 CPU 2
btrfs_clone_files()
btrfs_cont_expand()
btrfs_truncate_block()
--> zeroes part of the
page containg eof,
marking it for
delalloc
btrfs_clone()
--> finds extent item
covering eof,
points to extent
at bytenr X
--> copies it into a
local buffer
--> releases path
writeback starts
btrfs_finish_ordered_io()
insert_reserved_file_extent()
__btrfs_drop_extents()
--> creates delayed
reference to drop
the extent at
bytenr X
--> starts transaction
--> creates delayed
reference to
increment extent
at bytenr X
<delayed references are run, due to a transaction
commit for example, and the transaction is aborted
with -EIO because we attempt to increment reference
count for the extent at bytenr X after we freed it>
When this race is hit the running transaction ends up getting aborted with
an -EIO error and a trace like the following is produced:
[ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs]
(...)
[ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1
[ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs]
(...)
[ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202
[ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001
[ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000
[ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
[ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000
[ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548
[ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000
[ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0
[ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4382.564887] Call Trace:
[ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs]
[ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs]
[ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs]
[ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs]
[ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs]
[ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs]
[ 4382.568112] ? _raw_spin_unlock+0x24/0x30
[ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs]
[ 4382.569006] create_subvol+0x3c8/0x830 [btrfs]
[ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs]
[ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs]
[ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60
[ 4382.570822] ? __sb_start_write+0xd4/0x1c0
[ 4382.571262] ? mnt_want_write_file+0x24/0x50
[ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs]
[ 4382.572155] ? _copy_from_user+0x66/0x90
[ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs]
[ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs]
[ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570
[ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0
[ 4382.574379] ? _raw_spin_unlock+0x24/0x30
[ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0
[ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0
[ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[ 4382.576020] do_vfs_ioctl+0xa2/0x6f0
[ 4382.576405] ksys_ioctl+0x70/0x80
[ 4382.576776] __x64_sys_ioctl+0x16/0x20
[ 4382.577137] do_syscall_64+0x60/0x1b0
[ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
[ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7
[ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003
[ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044
[ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010
[ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050
[ 4382.580792] irq event stamp: 0
[ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null)
[ 4382.581441] hardirqs last disabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320
[ 4382.581772] softirqs last enabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320
[ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null)
[ 4382.582413] ---[ end trace d3c188e3e9367382 ]---
[ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure
[ 4382.624295] BTRFS info (device sdc): forced readonly
Fix this by waiting for writeback to complete after truncating the eof
block.
Fixes: 34a28e3d77 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since cloning and deduplication are no longer Btrfs specific operations, we
now have generic code to handle parameter validation, compare file ranges
used for deduplication, clear capabilities when cloning, etc. This change
makes Btrfs use it, eliminating a lot of code in Btrfs and also fixing a
few bugs, such as:
1) When cloning, the destination file's capabilities were not dropped
(the fstest generic/513 tests this);
2) We were not checking if the destination file is immutable;
3) Not checking if either the source or destination files are swap
files (swap file support is coming soon for Btrfs);
4) System limits were not checked (resource limits and O_LARGEFILE).
Note that the generic helper generic_remap_file_range_prep() does start
and waits for writeback by calling filemap_write_and_wait_range(), however
that is not enough for Btrfs for two reasons:
1) With compression, we need to start writeback twice in order to get the
pages marked for writeback and ordered extents created;
2) filemap_write_and_wait_range() (and all its other variants) only waits
for the IO to complete, but we need to wait for the ordered extents to
finish, so that when we do the actual reflinking operations the file
extent items are in the fs tree. This is also important due to the fact
that the generic helper, for the deduplication case, compares the
contents of the pages in the requested range, which might require
reading extents from disk in the very unlikely case that pages get
invalidated after writeback finishes (so the file extent items must be
up to date in the fs tree).
Since these reasons are specific to Btrfs we have to do it in the Btrfs
code before calling generic_remap_file_range_prep(). This also results
in a simpler way of dealing with existing delalloc in the source/target
ranges, specially for the deduplication case where we used to lock all
the pages first and then if we found any dealloc for the range, or
ordered extent, we would unlock the pages trigger writeback and wait for
ordered extents to complete, then lock all the pages again and check if
deduplication can be done. So now we get a simpler approach: lock the
inodes, then trigger writeback and then wait for ordered extents to
complete.
So make btrfs use generic_remap_file_range_prep() (XFS and OCFS2 use it)
to eliminate duplicated code, fix a few bugs and benefit from future bug
fixes done there - for example the recent clone and dedupe bugs involving
reflinking a partial EOF block got a counterpart fix in the generic
helper, since it affected all filesystems supporting these operations,
so we no longer need special checks in Btrfs for them.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_fs_info structure contains a copy of the
fsid/metadata_uuid fields. Same values are also contained in the
btrfs_fs_devices structure which fs_info has a reference to. Let's
reduce duplication by removing the fields from fs_info and always refer
to the ones in fs_devices. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Snapshot is expected to be fast. But if there are writers steadily
creating dirty pages in our subvolume, the snapshot may take a very long
time to complete. To fix the problem, we use tagged writepage for
snapshot flusher as we do in the generic write_cache_pages(), so we can
omit pages dirtied after the snapshot command.
This does not change the semantics regarding which data get to the
snapshot, if there are pages being dirtied during the snapshotting
operation. There's a sync called before snapshot is taken in old/new
case, any IO in flight just after that may be in the snapshot but this
depends on other system effects that might still sync the IO.
We do a simple snapshot speed test on a Intel D-1531 box:
fio --ioengine=libaio --iodepth=32 --bs=4k --rw=write --size=64G
--direct=0 --thread=1 --numjobs=1 --time_based --runtime=120
--filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5;
time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio
original: 1m58sec
patched: 6.54sec
This is the best case for this patch since for a sequential write case,
we omit nearly all pages dirtied after the snapshot command.
For a multi writers, random write test:
fio --ioengine=libaio --iodepth=32 --bs=4k --rw=randwrite --size=64G
--direct=0 --thread=1 --numjobs=4 --time_based --runtime=120
--filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5;
time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio
original: 15.83sec
patched: 10.35sec
The improvement is smaller compared to the sequential write case,
since we omit only half of the pages dirtied after snapshot command.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A later patch will implement swap file support for Btrfs, but before we
do that, we need to make sure that the various Btrfs ioctls cannot
change a swap file.
When a swap file is active, we must make sure that the extents of the
file are not moved and that they don't become shared. That means that
the following are not safe:
- chattr +c (enable compression)
- reflink
- dedupe
- snapshot
- defrag
Don't allow those to happen on an active swap file.
Additionally, balance, resize, device remove, and device replace are
also unsafe if they affect an active swapfile. Add a red-black tree of
block groups and devices which contain an active swapfile. Relocation
checks each block group against this tree and skips it or errors out for
balance or resize, respectively. Device remove and device replace check
the tree for the device they will operate on.
Note that we don't have to worry about chattr -C (disable nocow), which
we ignore for non-empty files, because an active swapfile must be
non-empty and can't be truncated. We also don't have to worry about
autodefrag because it's only done on COW files. Truncate and fallocate
are already taken care of by the generic code. Device add doesn't do
relocation so it's not an issue, either.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=K14u
-----END PGP SIGNATURE-----
Merge tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several fixes to recent release (4.19, fixes tagged for stable) and
other fixes"
* tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix missing delayed iputs on unmount
Btrfs: fix data corruption due to cloning of eof block
Btrfs: fix infinite loop on inode eviction after deduplication of eof block
Btrfs: fix deadlock on tree root leaf when finding free extent
btrfs: avoid link error with CONFIG_NO_AUTO_INLINE
btrfs: tree-checker: Fix misleading group system information
Btrfs: fix missing data checksums after a ranged fsync (msync)
btrfs: fix pinned underflow after transaction aborted
Btrfs: fix cur_offset in the error case for nocow
We currently allow cloning a range from a file which includes the last
block of the file even if the file's size is not aligned to the block
size. This is fine and useful when the destination file has the same size,
but when it does not and the range ends somewhere in the middle of the
destination file, it leads to corruption because the bytes between the EOF
and the end of the block have undefined data (when there is support for
discard/trimming they have a value of 0x00).
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ export foo_size=$((256 * 1024 + 100))
$ xfs_io -f -c "pwrite -S 0x3c 0 $foo_size" /mnt/foo
$ xfs_io -f -c "pwrite -S 0xb5 0 1M" /mnt/bar
$ xfs_io -c "reflink /mnt/foo 0 512K $foo_size" /mnt/bar
$ od -A d -t x1 /mnt/bar
0000000 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5
*
0524288 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c
*
0786528 3c 3c 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00
0786544 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0790528 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5
*
1048576
The bytes in the range from 786532 (512Kb + 256Kb + 100 bytes) to 790527
(512Kb + 256Kb + 4Kb - 1) got corrupted, having now a value of 0x00 instead
of 0xb5.
This is similar to the problem we had for deduplication that got recently
fixed by commit de02b9f6bb ("Btrfs: fix data corruption when
deduplicating between different files").
Fix this by not allowing such operations to be performed and return the
errno -EINVAL to user space. This is what XFS is doing as well at the VFS
level. This change however now makes us return -EINVAL instead of
-EOPNOTSUPP for cases where the source range maps to an inline extent and
the destination range's end is smaller then the destination file's size,
since the detection of inline extents is done during the actual process of
dropping file extent items (at __btrfs_drop_extents()). Returning the
-EINVAL error is done early on and solely based on the input parameters
(offsets and length) and destination file's size. This makes us consistent
with XFS and anyone else supporting cloning since this case is now checked
at a higher level in the VFS and is where the -EINVAL will be returned
from starting with kernel 4.20 (the VFS changed was introduced in 4.20-rc1
by commit 07d19dc9fb ("vfs: avoid problematic remapping requests into
partial EOF block"). So this change is more geared towards stable kernels,
as it's unlikely the new VFS checks get removed intentionally.
A test case for fstests follows soon, as well as an update to filter
existing tests that expect -EOPNOTSUPP to accept -EINVAL as well.
CC: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use
a common .remap_file_range method and supply generic bounds and sanity checking
functions that are shared with the data write path. The current VFS
infrastructure has problems with rlimit, LFS file sizes, file time stamps,
maximum filesystem file sizes, stripping setuid bits, etc and so they are
addressed in these commits.
We also introduce the ability for the ->remap_file_range methods to return short
clones so that clones for vfs_copy_file_range() don't get rejected if the entire
range can't be cloned. It also allows filesystems to sliently skip deduplication
of partial EOF blocks if they are not capable of doing so without requiring
errors to be thrown to userspace.
All existing filesystems are converted to user the new .remap_file_range method,
and both XFS and ocfs2 are modified to make use of the new generic checking
infrastructure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CE/A
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs dedup fixes from Dave Chinner:
"This reworks the vfs data cloning infrastructure.
We discovered many issues with these interfaces late in the 4.19 cycle
- the worst of them (data corruption, setuid stripping) were fixed for
XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all
the problems was needed. That rework is the contents of this pull
request.
Rework the vfs_clone_file_range and vfs_dedupe_file_range
infrastructure to use a common .remap_file_range method and supply
generic bounds and sanity checking functions that are shared with the
data write path. The current VFS infrastructure has problems with
rlimit, LFS file sizes, file time stamps, maximum filesystem file
sizes, stripping setuid bits, etc and so they are addressed in these
commits.
We also introduce the ability for the ->remap_file_range methods to
return short clones so that clones for vfs_copy_file_range() don't get
rejected if the entire range can't be cloned. It also allows
filesystems to sliently skip deduplication of partial EOF blocks if
they are not capable of doing so without requiring errors to be thrown
to userspace.
Existing filesystems are converted to user the new remap_file_range
method, and both XFS and ocfs2 are modified to make use of the new
generic checking infrastructure"
* tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: remove [cm]time update from reflink calls
xfs: remove xfs_reflink_remap_range
xfs: remove redundant remap partial EOF block checks
xfs: support returning partial reflink results
xfs: clean up xfs_reflink_remap_blocks call site
xfs: fix pagecache truncation prior to reflink
ocfs2: remove ocfs2_reflink_remap_range
ocfs2: support partial clone range and dedupe range
ocfs2: fix pagecache truncation prior to reflink
ocfs2: truncate page cache for clone destination file before remapping
vfs: clean up generic_remap_file_range_prep return value
vfs: hide file range comparison function
vfs: enable remap callers that can handle short operations
vfs: plumb remap flags through the vfs dedupe functions
vfs: plumb remap flags through the vfs clone functions
vfs: make remap_file_range functions take and return bytes completed
vfs: remap helper should update destination inode metadata
vfs: pass remap flags to generic_remap_checks
vfs: pass remap flags to generic_remap_file_range_prep
vfs: combine the clone and dedupe into a single remap_file_range
...
Change the remap_file_range functions to take a number of bytes to
operate upon and return the number of bytes they operated on. This is a
requirement for allowing fs implementations to return short clone/dedupe
results to the user, which will enable us to obey resource limits in a
graceful manner.
A subsequent patch will enable copy_file_range to signal to the
->clone_file_range implementation that it can handle a short length,
which will be returned in the function's return value. For now the
short return is not implemented anywhere so the behavior won't change --
either copy_file_range manages to clone the entire range or it tries an
alternative.
Neither clone ioctl can take advantage of this, alas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Combine the clone_file_range and dedupe_file_range operations into a
single remap_file_range file operation dispatch since they're
fundamentally the same operation. The differences between the two can
be made in the prep functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
[BUG]
fstrim on some btrfs only trims the unallocated space, not trimming any
space in existing block groups.
[CAUSE]
Before fstrim_range passed to btrfs_trim_fs(), it gets truncated to
range [0, super->total_bytes). So later btrfs_trim_fs() will only be
able to trim block groups in range [0, super->total_bytes).
While for btrfs, any bytenr aligned to sectorsize is valid, since btrfs
uses its logical address space, there is nothing limiting the location
where we put block groups.
For filesystem with frequent balance, it's quite easy to relocate all
block groups and bytenr of block groups will start beyond
super->total_bytes.
In that case, btrfs will not trim existing block groups.
[FIX]
Just remove the truncation in btrfs_ioctl_fitrim(), so btrfs_trim_fs()
can get the unmodified range, which is normally set to [0, U64_MAX].
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: f4c697e640 ("btrfs: return EINVAL if start > total_bytes in fitrim ioctl")
CC: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 8b62f87bad ("Btrfs: rework outstanding_extents"),
manual operations of outstanding_extent in btrfs_inode are replaced by
btrfs_mod_outstanding_extents().
The one in cluster_pages_for_defrag seems to be lost, so replace it
of btrfs_mod_outstanding_extents().
Fixes: 8b62f87bad ("Btrfs: rework outstanding_extents")
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two members in struct btrfs_root which indicate root's
objectid: objectid and root_key.objectid.
They are both set to the same value in __setup_root():
static void __setup_root(struct btrfs_root *root,
struct btrfs_fs_info *fs_info,
u64 objectid)
{
...
root->objectid = objectid;
...
root->root_key.objectid = objecitd;
...
}
and not changed to other value after initialization.
grep in btrfs directory shows both are used in many places:
$ grep -rI "root->root_key.objectid" | wc -l
133
$ grep -rI "root->objectid" | wc -l
55
(4.17, inc. some noise)
It is confusing to have two similar variable names and it seems
that there is no rule about which should be used in a certain case.
Since ->root_key itself is needed for tree reloc tree, let's remove
'objecitd' member and unify code to use ->root_key.objectid in all places.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass the root tree of dir, we can push that down to the
function itself.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=fu93
-----END PGP SIGNATURE-----
Merge tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix for improper fsync after hardlink
- fix for a corruption during file deduplication
- use after free fixes
- RCU warning fix
- fix for buffered write to nodatacow file
* tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Fix suspicious RCU usage warning in btrfs_debug_in_rcu
btrfs: use after free in btrfs_quota_enable
btrfs: btrfs_shrink_device should call commit transaction at the end
btrfs: fix qgroup_free wrong num_bytes in btrfs_subvolume_reserve_metadata
Btrfs: fix data corruption when deduplicating between different files
Btrfs: sync log after logging new name
Btrfs: fix unexpected failure of nocow buffered writes after snapshotting when low on space
If we deduplicate extents between two different files we can end up
corrupting data if the source range ends at the size of the source file,
the source file's size is not aligned to the filesystem's block size
and the destination range does not go past the size of the destination
file size.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0x6b 0 2518890" /mnt/foo
# The first byte with a value of 0xae starts at an offset (2518890)
# which is not a multiple of the sector size.
$ xfs_io -c "pwrite -S 0xae 2518890 102398" /mnt/foo
# Confirm the file content is full of bytes with values 0x6b and 0xae.
$ od -t x1 /mnt/foo
0000000 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
*
11467540 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ae ae ae ae ae ae
11467560 ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae
*
11777540 ae ae ae ae ae ae ae ae
11777550
# Create a second file with a length not aligned to the sector size,
# whose bytes all have the value 0x6b, so that its extent(s) can be
# deduplicated with the first file.
$ xfs_io -f -c "pwrite -S 0x6b 0 557771" /mnt/bar
# Now deduplicate the entire second file into a range of the first file
# that also has all bytes with the value 0x6b. The destination range's
# end offset must not be aligned to the sector size and must be less
# then the offset of the first byte with the value 0xae (byte at offset
# 2518890).
$ xfs_io -c "dedupe /mnt/bar 0 1957888 557771" /mnt/foo
# The bytes in the range starting at offset 2515659 (end of the
# deduplication range) and ending at offset 2519040 (start offset
# rounded up to the block size) must all have the value 0xae (and not
# replaced with 0x00 values). In other words, we should have exactly
# the same data we had before we asked for deduplication.
$ od -t x1 /mnt/foo
0000000 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
*
11467540 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ae ae ae ae ae ae
11467560 ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae
*
11777540 ae ae ae ae ae ae ae ae
11777550
# Unmount the filesystem and mount it again. This guarantees any file
# data in the page cache is dropped.
$ umount /dev/sdb
$ mount /dev/sdb /mnt
$ od -t x1 /mnt/foo
0000000 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
*
11461300 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 00
11461320 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
11470000 ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae
*
11777540 ae ae ae ae ae ae ae ae
11777550
# The bytes in range 2515659 to 2519040 have a value of 0x00 and not a
# value of 0xae, data corruption happened due to the deduplication
# operation.
So fix this by rounding down, to the sector size, the length used for the
deduplication when the following conditions are met:
1) Source file's range ends at its i_size;
2) Source file's i_size is not aligned to the sector size;
3) Destination range does not cross the i_size of the destination file.
Fixes: e1d227a42e ("btrfs: Handle unaligned length in extent_same")
CC: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This contains two new features:
1) Stack file operations: this allows removal of several hacks from the
VFS, proper interaction of read-only open files with copy-up,
possibility to implement fs modifying ioctls properly, and others.
2) Metadata only copy-up: when file is on lower layer and only metadata is
modified (except size) then only copy up the metadata and continue to
use the data from the lower file.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW3srhAAKCRDh3BK/laaZ
PC6tAQCP+KklcN+TvNp502f+O/kATahSpgnun4NY1/p4I8JV+AEAzdlkTN3+MiAO
fn9brN6mBK7h59DO3hqedPLJy2vrgwg=
=QDXH
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"This contains two new features:
- Stack file operations: this allows removal of several hacks from
the VFS, proper interaction of read-only open files with copy-up,
possibility to implement fs modifying ioctls properly, and others.
- Metadata only copy-up: when file is on lower layer and only
metadata is modified (except size) then only copy up the metadata
and continue to use the data from the lower file"
* tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits)
ovl: Enable metadata only feature
ovl: Do not do metacopy only for ioctl modifying file attr
ovl: Do not do metadata only copy-up for truncate operation
ovl: add helper to force data copy-up
ovl: Check redirect on index as well
ovl: Set redirect on upper inode when it is linked
ovl: Set redirect on metacopy files upon rename
ovl: Do not set dentry type ORIGIN for broken hardlinks
ovl: Add an inode flag OVL_CONST_INO
ovl: Treat metacopy dentries as type OVL_PATH_MERGE
ovl: Check redirects for metacopy files
ovl: Move some dir related ovl_lookup_single() code in else block
ovl: Do not expose metacopy only dentry from d_real()
ovl: Open file with data except for the case of fsync
ovl: Add helper ovl_inode_realdata()
ovl: Store lower data inode in ovl_inode
ovl: Fix ovl_getattr() to get number of blocks from lower
ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry
ovl: Copy up meta inode data from lowest data inode
ovl: Modify ovl_lookup() and friends to lookup metacopy dentry
...
Commit e9894fd3e3 ("Btrfs: fix snapshot vs nocow writting") forced
nocow writes to fallback to COW, during writeback, when a snapshot is
created. This resulted in writes made before creating the snapshot to
unexpectedly fail with ENOSPC during writeback when success (0) was
returned to user space through the write system call.
The steps leading to this problem are:
1. When it's not possible to allocate data space for a write, the
buffered write path checks if a NOCOW write is possible. If it is,
it will not reserve space and success (0) is returned to user space.
2. Then when a snapshot is created, the root's will_be_snapshotted
atomic is incremented and writeback is triggered for all inode's that
belong to the root being snapshotted. Incrementing that atomic forces
all previous writes to fallback to COW during writeback (running
delalloc).
3. This results in the writeback for the inodes to fail and therefore
setting the ENOSPC error in their mappings, so that a subsequent
fsync on them will report the error to user space. So it's not a
completely silent data loss (since fsync will report ENOSPC) but it's
a very unexpected and undesirable behaviour, because if a clean
shutdown/unmount of the filesystem happens without previous calls to
fsync, it is expected to have the data present in the files after
mounting the filesystem again.
So fix this by adding a new atomic named snapshot_force_cow to the
root structure which prevents this behaviour and works the following way:
1. It is incremented when we start to create a snapshot after triggering
writeback and before waiting for writeback to finish.
2. This new atomic is now what is used by writeback (running delalloc)
to decide whether we need to fallback to COW or not. Because we
incremented this new atomic after triggering writeback in the
snapshot creation ioctl, we ensure that all buffered writes that
happened before snapshot creation will succeed and not fallback to
COW (which would make them fail with ENOSPC).
3. The existing atomic, will_be_snapshotted, is kept because it is used
to force new buffered writes, that start after we started
snapshotting, to reserve data space even when NOCOW is possible.
This makes these writes fail early with ENOSPC when there's no
available space to allocate, preventing the unexpected behaviour of
writeback later failing with ENOSPC due to a fallback to COW mode.
Fixes: e9894fd3e3 ("Btrfs: fix snapshot vs nocow writting")
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It can be referenced from the passed transaction handle.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Requiring a read-write descriptor conflicts both ways with exec,
returning ETXTBSY whenever you try to defrag a program that's currently
being run, or causing intermittent exec failures on a live system being
defragged.
As defrag doesn't change the file's contents in any way, there's no
reason to consider it a rw operation. Thus, let's check only whether
the file could have been opened rw. Such access control is still needed
as currently defrag can use extra disk space, and might trigger bugs.
We return EINVAL when the request is invalid; here it's ok but merely
the user has insufficient privileges. Thus, the EPERM return value
reflects the error better -- as discussed in the identical case for
dedupe.
According to codesearch.debian.net, no userspace program distinguishes
these values beyond strerror().
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: David Sterba <dsterba@suse.com>
[ fold the EPERM patch from Adam ]
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 5d23515be6 ("btrfs: Move qgroup rescan on quota enable to
btrfs_quota_enable") not only resulted in an easier to follow code but
it also introduced a subtle bug. It changed the timing when the initial
transaction rescan was happening:
- before the commit: it would happen after transaction commit had occured
- after the commit: it might happen before the transaction was committed
This results in failure to correctly rescan the quota since there could
be data which is still not committed on disk.
This patch aims to fix this by moving the transaction creation/commit
inside btrfs_quota_enable, which allows to schedule the quota commit
after the transaction has been committed.
Fixes: 5d23515be6 ("btrfs: Move qgroup rescan on quota enable to btrfs_quota_enable")
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Link: https://marc.info/?l=linux-btrfs&m=152999289017582
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a new extent buffer is allocated there are a few mandatory fields
which need to be set in order for the buffer to be sane: level,
generation, bytenr, backref_rev, owner and FSID/UUID. Currently this
is open coded in the callers of btrfs_alloc_tree_block, meaning it's
fairly high in the abstraction hierarchy of operations. This patch
solves this by simply moving this init code in btrfs_init_new_buffer,
since this is the function which initializes a newly allocated
extent buffer. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch avoids that building the BTRFS source code with smatch
triggers complaints about inconsistent indenting.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_cmp_data_free() puts cmp's src_pages and dst_pages, but leaves
their page address intact. Now, if you hit "goto again" in
btrfs_extent_same_range() and hit some error in
btrfs_cmp_data_prepare(), you'll try to unlock/put already put pages.
This is simple fix to reset the address to avoid use-after-free.
Fixes: 67b07bd4be ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl")
Signed-off-by: Naohiro Aota <naota@elisp.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Clean up f_op->dedupe_file_range() interface.
1) Use loff_t for offsets and length instead of u64
2) Order the arguments the same way as {copy|clone}_file_range().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=fCdm
-----END PGP SIGNATURE-----
Merge tag 'for-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two regression fixes and an incorrect error value propagation fix from
'rename exchange'"
* tag 'for-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix return value on rename exchange failure
btrfs: fix invalid-free in btrfs_extent_same
Btrfs: fix physical offset reported by fiemap for inline extents
If this condition ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) !=
(BTRFS_I(dst)->flags & BTRFS_INODE_NODATASUM))
is hit, we will go to free the uninitialized cmp.src_pages and
cmp.dst_pages.
Fixes: 67b07bd4be ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl")
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
The patch introducing the ioctl was not the latest version at the time
of merging to the mainline and needs a fixup from this patch.
Fixes: ba637a252d30 ("btrfs: Check error of btrfs_iget() in btrfs_search_path_in_tree_user")
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add unprivileged version of ino_lookup ioctl BTRFS_IOC_INO_LOOKUP_USER
to allow normal users to call "btrfs subvolume list/show" etc. in
combination with BTRFS_IOC_GET_SUBVOL_INFO/BTRFS_IOC_GET_SUBVOL_ROOTREF.
This can be used like BTRFS_IOC_INO_LOOKUP but the argument is
different. This is because it always searches the fs/file tree
correspoinding to the fd with which this ioctl is called and also
returns the name of bottom subvolume.
The main differences from original ino_lookup ioctl are:
1. Read + Exec permission will be checked using inode_permission()
during path construction. -EACCES will be returned in case
of failure.
2. Path construction will be stopped at the inode number which
corresponds to the fd with which this ioctl is called. If
constructed path does not exist under fd's inode, -EACCES
will be returned.
3. The name of bottom subvolume is also searched and filled.
Note that the maximum length of path is shorter 256 (BTRFS_VOL_NAME_MAX+1)
bytes than ino_lookup ioctl because of space of subvolume's name.
Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
[ style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add unprivileged ioctl BTRFS_IOC_GET_SUBVOL_ROOTREF which returns
ROOT_REF information of the subvolume containing this inode except the
subvolume name (this is because to prevent potential name leak). The
subvolume name will be gained by user version of ino_lookup ioctl
(BTRFS_IOC_INO_LOOKUP_USER) which also performs permission check.
The min id of root ref's subvolume to be searched is specified by
@min_id in struct btrfs_ioctl_get_subvol_rootref_args. After the search
ends, @min_id is set to the last searched root ref's subvolid + 1. Also,
if there are more root refs than BTRFS_MAX_ROOTREF_BUFFER_NUM,
-EOVERFLOW is returned. Therefore the caller can just call this ioctl
again without changing the argument to continue search.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
[ style fixes and struct item renames ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add new unprivileged ioctl BTRFS_IOC_GET_SUBVOL_INFO which returns
the information of subvolume containing this inode.
(i.e. returns the information in ROOT_ITEM and ROOT_BACKREF.)
Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
[ minor style fixes, update struct comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 7775c8184e ("btrfs: remove unused parameter from
btrfs_subvolume_release_metadata") parameter qgroup_reserved is not used
by caller of function btrfs_subvolume_reserve_metadata. So remove it.
Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function always takes a transaction handle which contains a
reference to the fs_info. Use that and remove the extra argument.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ rename the function ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function always takes a transaction handle which contains a
reference to the fs_info. Use that and remove the extra argument.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have invalid flags set, when we error out we must drop our writer
counter and free the buffer we allocated for the arguments. This bug is
trivially reproduced with the following program on 4.7+:
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <linux/btrfs.h>
#include <linux/btrfs_tree.h>
int main(int argc, char **argv)
{
struct btrfs_ioctl_vol_args_v2 vol_args = {
.flags = UINT64_MAX,
};
int ret;
int fd;
if (argc != 2) {
fprintf(stderr, "usage: %s PATH\n", argv[0]);
return EXIT_FAILURE;
}
fd = open(argv[1], O_WRONLY);
if (fd == -1) {
perror("open");
return EXIT_FAILURE;
}
ret = ioctl(fd, BTRFS_IOC_RM_DEV_V2, &vol_args);
if (ret == -1)
perror("ioctl");
close(fd);
return EXIT_SUCCESS;
}
When unmounting the filesystem, we'll hit the
WARN_ON(mnt_get_writers(mnt)) in cleanup_mnt() and also may prevent the
filesystem to be remounted read-only as the writer count will stay
lifted.
Fixes: 6b526ed70c ("btrfs: introduce device delete by devid")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_clone_files(), we must check the NODATASUM flag while the
inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags()
will change the flags after we check and we can end up with a party
checksummed file.
The race window is only a few instructions in size, between the if and
the locks which is:
3834 if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode))
3835 return -EISDIR;
where the setflags must be run and toggle the NODATASUM flag (provided
the file size is 0). The clone will block on the inode lock, segflags
takes the inode lock, changes flags, releases log and clone continues.
Not impossible but still needs a lot of bad luck to hit unintentionally.
Fixes: 0e7b824c4e ("Btrfs: don't make a file partly checksummed through file clone")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_read_fs_root_no_name() may return ERR_PTR(-ENOENT) or
ERR_PTR(-ENOMEM) and therefore search_ioctl() and
btrfs_search_path_in_tree() should use PTR_ERR() instead of -ENOENT,
which all other callers of btrfs_read_fs_root_no_name() do.
Drop the error message as it would be confusing, the caller of ioctl
will likely interpret the error code and not look into the syslog.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The dedupe range is 16 MiB, with 4 KiB pages and 8 byte pointers, the
arrays can be 32KiB large. To avoid allocation failures due to
fragmented memory, use the allocation with fallback to vmalloc.
The arrays are allocated and freed only inside btrfs_extent_same and
reused for all the ranges.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We support big dedup requests by splitting range to smaller parts, and
call dedupe logic on each of them.
Instead of repeated allocation and deallocation, allocate once at the
beginning and reuse in the iteration.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_dedupe_file_range silently restricts the dedupe range to
to 16MiB to limit locking and working memory size and is documented in
manual page as implementation specific.
Let's remove that restriction by iterating over the dedup range in 16MiB
steps. This is backward compatible and will not change anything for
requests smaller then 16MiB.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Split btrfs_extent_same() to two parts where one is the main EXTENT_SAME
entry and a helper that can be repeatedly called on a range. This will
be used in following patches.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
* The simple 'flags' refer to the btrfs inode
* ... that's in 'binode
* the FS_*_FL variables are 'fsflags'
* the old copies of the variable are prefixed by 'old_'
* Struct inode flags contain 'i_flags'.
Signed-off-by: David Sterba <dsterba@suse.com>
The new ioctl is an extension to the FS_IOC_SETFLAGS and adds new
flags and is extensible. Don't get fooled by the XATTR in the name, it
does not have anything in common with the extended attributes,
incidentally also abbreviated as XATTRs.
This patch allows to set the xflags portion of the fsxattr structure,
other items have no meaning and non-zero values will result in
EOPNOTSUPP.
Currently supported xflags:
- APPEND
- IMMUTABLE
- NOATIME
- NODUMP
- SYNC
The structure of btrfs_ioctl_fssetxattr copies btrfs_ioctl_setflags but
is simpler on the flag setting side.
The original patch was written by Chandan Jay Sharma but was incomplete
and no further revision has been sent.
Based-on-patches-by: Chandan Jay Sharma <chandansbg@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new ioctl is an extension to the FS_IOC_GETFLAGS and adds new
flags and is extensible. This patch allows to return the xflags portion
of the fsxattr structure, other items have no meaning for btrfs or can
be added later.
The original patch was written by Chandan Jay Sharma but was incomplete
and no further revision has been sent. Several cleanups were necessary
to avoid confusion with other ioctls, as we have another flavor of
flags.
Based-on-patches-by: Chandan Jay Sharma <chandansbg@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The FS_*_FL flags cannot be easily identified by a prefix but we still
need to recognize them so the 'fsflags' should be closer to the naming
scheme but again the 'fs' part sounds like it's a filesystem flag. I
don't have a better idea for now.
Signed-off-by: David Sterba <dsterba@suse.com>
The FS_*_FL flags cannot be easily identified by a variable name prefix
but we still need to recognize them so the 'fsflags' should be closer to
the naming scheme but again the 'fs' part sounds like it's a filesystem
flag. I don't have a better idea for now.
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info is always available from the context so we don't need to
store it in the structure.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's always set to 0, so just remove it and collapse the constant value
to the only function we are passing it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This parameter was introduced alongside the function in
eb73c1b7ce ("Btrfs: introduce per-subvolume delalloc inode list") to
avoid deadlocks since this function was used in the transaction commit
path. However, commit 8d875f95da ("btrfs: disable strict file flushes
for renames and truncates") removed that usage, rendering the parameter
obsolete.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter controls locking of the stats part but we can lock it
unconditionally, as this only happens once when balance starts. This is
not performance critical.
Add the prefix for an exported function.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently fs_info::balance_running is 0 or 1 and does not use the
semantics of atomics. The pause and cancel check for 0, that can happen
only after __btrfs_balance exits for whatever reason.
Parallel calls to balance ioctl may enter btrfs_ioctl_balance multiple
times but will block on the balance_mutex that protects the
fs_info::flags bit.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Mutual exclusion of device add/rm and balance was done by the volume
mutex up to version 3.7. The commit 5ac00addc7 ("Btrfs: disallow
mutually exclusive admin operations from user mode") added a bit that
essentially tracked the same information.
The status bit has an advantage over a mutex that it can be set without
restrictions of function context, so it started to be used in the
mount-time resuming of balance or device replace.
But we don't really need to track the same information in two ways.
1) After the previous cleanups, the main ioctl handlers for
add/del/resize copy the EXCL_OP bit next to the volume mutex, here
it's clearly safe.
2) Resuming balance during mount or after rw remount will set only the
EXCL_OP bit and the volume_mutex is held in the kernel thread that
calls btrfs_balance.
3) Resuming device replace during mount or after rw remount is done
after balance and is excluded by the EXCL_OP bit. It does not take
the volume_mutex at all and completely relies on the EXCL_OP bit.
4) The resuming of balance and dev-replace cannot hapen at the same time
as the ioctls cannot be started in parallel. Nevertheless, a crafted
image could trigger that and a warning is printed.
5) Balance is normally excluded by EXCL_OP and also uses own mutex to
protect against concurrent access to its status data. There's some
trickery to maintain the right lock nesting in case we need to
reexamine the status in btrfs_ioctl_balance. The volume_mutex is
removed and the unlock/lock sequence is left in place as we might
expect other waiters to proceed.
6) Similar to 5, the unlock/lock sequence is kept in
btrfs_cancel_balance to allow waiters to continue.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function __cancel_balance name is confusing with the cancel
operation of balance and it really resets the state of balance back to
zero. The unset_balance_control helper is called only from one place and
simple enough to be inlined.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move locking and unlocking next to the BTRFS_FS_EXCL_OP bit manipulation
so it's obvious that the two happen at the same time.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out the second half of btrfs_ioctl_snap_destroy() as
btrfs_delete_subvolume(), which performs some subvolume specific checks
before deletion:
1. send is not in progress
2. the subvolume is not the default subvolume
3. the subvolume does not contain other subvolumes
and actual deletion process. btrfs_delete_subvolume() requires
inode_lock for both @dir and inode of @dentry. The remaining part of
btrfs_ioctl_snap_destroy() is mainly permission checks.
Note that call of d_delete() is not included in btrfs_delete_subvolume()
as this function will also be used by btrfs_rmdir() to delete an empty
subvolume and in that case d_delete() is called in VFS layer.
As a result, btrfs_unlink_subvol() and may_destroy_subvol()
become static functions. No functional changes.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparation work to refactor btrfs_ioctl_snap_destroy()
and to allow rmdir(2) to delete an empty subvolume.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor update of the function comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_get_block_group_info() was introduced by the
commit 5af3e8cce8 ("Btrfs: make filesystem read-only when submitting
barrier fails") which used it in disk-io.c.
However, the function is only called in ioctl.c now.
Its parameter type btrfs_ioctl_space_info* is only for ioctl.
So, make it static and rename it to be original name
get_block_group_info.
No functional change.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=I0y0
-----END PGP SIGNATURE-----
Merge tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs updates from David Sterba:
"We have queued a few more fixes (error handling, log replay,
softlockup) and the rest is SPDX updates that touche almost all files
so the diffstat is long"
* tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Only check first key for committed tree blocks
btrfs: add SPDX header to Kconfig
btrfs: replace GPL boilerplate by SPDX -- sources
btrfs: replace GPL boilerplate by SPDX -- headers
Btrfs: fix loss of prealloc extents past i_size after fsync log replay
Btrfs: clean up resources during umount after trans is aborted
btrfs: Fix possible softlock on single core machines
Btrfs: bail out on error during replay_dir_deletes
Btrfs: fix NULL pointer dereference in log_dir_items
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=wkSk
-----END PGP SIGNATURE-----
Merge tag 'for-4.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There are a several user visible changes, the rest is mostly invisible
and continues to clean up the whole code base.
User visible changes:
- new mount option nossd_spread (pair for ssd_spread)
- mount option subvolid will detect junk after the number and fail
the mount
- add message after cancelled device replace
- direct module dependency on libcrc32, removed own crc wrappers
- removed user space transaction ioctls
- use lighter locking when reading /proc/self/mounts, RCU instead of
mutex to avoid unnecessary contention
Enhancements:
- skip writeback of last page when truncating file to same size
- send: do not issue unnecessary truncate operations
- mount option token specifiers: use %u for unsigned values, more
validation
- selftests: more tree block validations
qgroups:
- preparatory work for splitting reservation types for data and
metadata, this should allow for more accurate tracking and fix some
issues with underflows or do further enhancements
- split metadata reservations for started and joined transaction so
they do not get mixed up and are accounted correctly at commit time
- with the above, it's possible to revert patch that potentially
deadlocks when trying to make more space by explicitly committing
when the quota limit is hit
- fix root item corruption when multiple same source snapshots are
created with quota enabled
RAID56:
- make sure target is identical to source when raid56 rebuild fails
after dev-replace
- faster rebuild during scrub, batch by stripes and not
block-by-block
- make more use of cached data when rebuilding from a missing device
Fixes:
- null pointer deref when device replace target is missing
- fix fsync after hole punching when using no-holes feature
- fix lockdep splat when allocating percpu data with wrong GFP flags
Cleanups, refactoring, core changes:
- drop redunant parameters from various functions
- kill and opencode trivial helpers
- __cold/__exit function annotations
- dead code removal
- continued audit and documentation of memory barriers
- error handling: handle removal from uuid tree
- error handling: remove handling of impossible condtitons
- more debugging or error messages
- updated tracepoints
- one VLA use removal (and one still left)"
* tag 'for-4.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (164 commits)
btrfs: lift errors from add_extent_changeset to the callers
Btrfs: print error messages when failing to read trees
btrfs: user proper type for btrfs_mask_flags flags
btrfs: split dev-replace locking helpers for read and write
btrfs: remove stale comments about fs_mutex
btrfs: use RCU in btrfs_show_devname for device list traversal
btrfs: update barrier in should_cow_block
btrfs: use lockdep_assert_held for mutexes
btrfs: use lockdep_assert_held for spinlocks
btrfs: Validate child tree block's level and first key
btrfs: tests/qgroup: Fix wrong tree backref level
Btrfs: fix copy_items() return value when logging an inode
Btrfs: fix fsync after hole punching when using no-holes feature
btrfs: use helper to set ulist aux from a qgroup
Revert "btrfs: qgroups: Retry after commit on getting EDQUOT"
btrfs: qgroup: Update trace events for metadata reservation
btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space
btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item
btrfs: qgroup: Use separate meta reservation type for delalloc
btrfs: qgroup: Introduce function to convert META_PREALLOC into META_PERTRANS
...
All users pass a local unsigned int and not the __uXX types that are
supposed to be used for userspace interfaces.
Signed-off-by: David Sterba <dsterba@suse.com>
Before this patch, btrfs qgroup is mixing per-transcation meta rsv with
preallocated meta rsv, making it quite easy to underflow qgroup meta
reservation.
Since we have the new qgroup meta rsv types, apply it to delalloc
reservation.
Now for delalloc, most of its reserved space will use META_PREALLOC qgroup
rsv type.
And for callers reducing outstanding extent like btrfs_finish_ordered_io(),
they will convert corresponding META_PREALLOC reservation to
META_PERTRANS.
This is mainly due to the fact that current qgroup numbers will only be
updated in btrfs_commit_transaction(), that's to say if we don't keep
such placeholder reservation, we can exceed qgroup limitation.
And for callers freeing outstanding extent in error handler, we will
just free META_PREALLOC bytes.
This behavior makes callers of btrfs_qgroup_release_meta() or
btrfs_qgroup_convert_meta() to be aware of which type they are.
So in this patch, btrfs_delalloc_release_metadata() and its callers get
an extra parameter to info qgroup to do correct meta convert/release.
The good news is, even we use the wrong type (convert or free), it won't
cause obvious bug, as prealloc type is always in good shape, and the
type only affects how per-trans meta is increased or not.
So the worst case will be at most metadata limitation can be sometimes
exceeded (no convert at all) or metadata limitation is reached too soon
(no free at all).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As with every function which deals with modifying the btree
btrfs_uuid_tree_rem can fail for any number of reasons (ie. EIO/ENOMEM).
Handle return error value from this function gracefully by aborting the
transaction.
Fixes: dd5f9615fc ("Btrfs: maintain subvolume items in the UUID tree")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 3558d4f88e ("btrfs: Deprecate userspace transaction ioctls")
marked the beginning of the end of userspace transaction. This commit
finishes the job! There are no known users and ceph does not use the
ioctl anymore.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Sage Weil <sage@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some functions can filter metadata by the generation. Add a define that
will annotate such arguments.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Remove __ which is for the special functions.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_dev_replace_cancel() calls __btrfs_dev_replace_cancel() for the
actual cancel so just open code it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Irul
-----END PGP SIGNATURE-----
Merge tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features or user visible changes:
- fallocate: implement zero range mode
- avoid losing data raid profile when deleting a device
- tree item checker: more checks for directory items and xattrs
Notable fixes:
- raid56 recovery: don't use cached stripes, that could be
potentially changed and a later RMW or recovery would lead to
corruptions or failures
- let raid56 try harder to rebuild damaged data, reading from all
stripes if necessary
- fix scrub to repair raid56 in a similar way as in the case above
Other:
- cleanups: device freeing, removed some call indirections, redundant
bio_put/_get, unused parameters, refactorings and renames
- RCU list traversal fixups
- simplify mount callchain, remove recursing back when mounting a
subvolume
- plug for fsync, may improve bio merging on multiple devices
- compression heurisic: replace heap sort with radix sort, gains some
performance
- add extent map selftests, buffered write vs dio"
* tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (155 commits)
btrfs: drop devid as device_list_add() arg
btrfs: get device pointer from device_list_add()
btrfs: set the total_devices in device_list_add()
btrfs: move pr_info into device_list_add
btrfs: make btrfs_free_stale_devices() to match the path
btrfs: rename btrfs_free_stale_devices() arg to skip_dev
btrfs: make btrfs_free_stale_devices() argument optional
btrfs: make btrfs_free_stale_device() to iterate all stales
btrfs: no need to check for btrfs_fs_devices::seeding
btrfs: Use IS_ALIGNED in btrfs_truncate_block instead of opencoding it
Btrfs: noinline merge_extent_mapping
Btrfs: add WARN_ONCE to detect unexpected error from merge_extent_mapping
Btrfs: extent map selftest: dio write vs dio read
Btrfs: extent map selftest: buffered write vs dio read
Btrfs: add extent map selftests
Btrfs: move extent map specific code to extent_map.c
Btrfs: add helper for em merge logic
Btrfs: fix unexpected EEXIST from btrfs_get_extent
Btrfs: fix incorrect block_len in merge_extent_mapping
btrfs: Remove unused readahead spinlock
...
Add a documentation blob that explains what the i_version field is, how
it is expected to work, and how it is currently implemented by various
filesystems.
We already have inode_inc_iversion. Add several other functions for
manipulating and accessing the i_version counter. For now, the
implementation is trivial and basically works the way that all of the
open-coded i_version accesses work today.
Future patches will convert existing users of i_version to use the new
API, and then convert the backend implementation to do things more
efficiently.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
gcc-8 reports:
fs/btrfs/ioctl.c: In function 'btrfs_ioctl':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 1024 equals destination size [-Wstringop-truncation]
We need one less byte or call strlcpy() to make it a nul-terminated
string. This is done on the next line anyway, but we want to avoid the
warning.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass either GFP_NOFS or GFP_KERNEL now, so we can sink the
parameter to the function, though we lose some of the slightly better
semantics of GFP_KERNEL in some places, it's worth cleaning up the
callchains.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::is_tgtdev_for_dev_replace.
Instead of that declare btrfs_device::dev_state
BTRFS_DEV_STATE_MISSING and use the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::writeable. Instead of that
declare device state BTRFS_DEV_STATE_WRITEABLE and use the
bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
All callers use GFP_NOFS, we don't have to pass it as an argument. The
built-in tests pass GFP_KERNEL, but they run only at module load time
and NOFS works there as well.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use the mutex as we do not modify the devices nor the
list itself and just read information about device counts.
Move copying fsid out of the protected section, not applicable to RCU
same as the rest of the retrieved information.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use the mutex as we do not modify the devices nor the
list itself and just read some information:
does not change during device lifetime:
- devid
- uuid
- name (ie. the path)
may change in parallel to the ioctl call, but can lead only to reporting
inacurracy:
- bytes_used
- total_bytes
Signed-off-by: David Sterba <dsterba@suse.com>
A cleanup patch no functional change, we hold volume_mutex before
calling btrfs_rm_device, so move it into the function itself.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=YaZE
-----END PGP SIGNATURE-----
Merge tag 'for-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"This contains a few fixes (error handling, quota leak, FUA vs
nobarrier mount option).
There's one one worth mentioning separately - an off-by-one fix that
leads to overwriting first byte of an adjacent page with 0, out of
bounds of the memory allocated by an ioctl. This is under a privileged
part of the ioctl, can be triggerd in some subvolume layouts"
* tag 'for-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Fix possible off-by-one in btrfs_search_path_in_tree
Btrfs: disable FUA if mounted with nobarrier
btrfs: fix missing error return in btrfs_drop_snapshot
btrfs: handle errors while updating refcounts in update_ref_for_cow
btrfs: Fix quota reservation leak on preallocated files
The name char array passed to btrfs_search_path_in_tree is of size
BTRFS_INO_LOOKUP_PATH_MAX (4080). So the actual accessible char indexes
are in the range of [0, 4079]. Currently the code uses the define but this
represents an off-by-one.
Implications:
Size of btrfs_ioctl_ino_lookup_args is 4096, so the new byte will be
written to extra space, not some padding that could be provided by the
allocator.
btrfs-progs store the arguments on stack, but kernel does own copy of
the ioctl buffer and the off-by-one overwrite does not affect userspace,
but the ending 0 might be lost.
Kernel ioctl buffer is allocated dynamically so we're overwriting
somebody else's memory, and the ioctl is privileged if args.objectid is
not 256. Which is in most cases, but resolving a subvolume stored in
another directory will trigger that path.
Before this patch the buffer was one byte larger, but then the -1 was
not added.
Fixes: ac8e9819d7 ("Btrfs: add search and inode lookup ioctls")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added implications ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now we do a lot of weird hoops around outstanding_extents in order
to keep the extent count consistent. This is because we logically
transfer the outstanding_extent count from the initial reservation
through the set_delalloc_bits. This makes it pretty difficult to get a
handle on how and when we need to mess with outstanding_extents.
Fix this by revamping the rules of how we deal with outstanding_extents.
Now instead everybody that is holding on to a delalloc extent is
required to increase the outstanding extents count for itself. This
means we'll have something like this
btrfs_delalloc_reserve_metadata - outstanding_extents = 1
btrfs_set_extent_delalloc - outstanding_extents = 2
btrfs_release_delalloc_extents - outstanding_extents = 1
for an initial file write. Now take the append write where we extend an
existing delalloc range but still under the maximum extent size
btrfs_delalloc_reserve_metadata - outstanding_extents = 2
btrfs_set_extent_delalloc
btrfs_set_bit_hook - outstanding_extents = 3
btrfs_merge_extent_hook - outstanding_extents = 2
btrfs_delalloc_release_extents - outstanding_extnets = 1
In order to make the ordered extent transition we of course must now
make ordered extents carry their own outstanding_extent reservation, so
for cow_file_range we end up with
btrfs_add_ordered_extent - outstanding_extents = 2
clear_extent_bit - outstanding_extents = 1
btrfs_remove_ordered_extent - outstanding_extents = 0
This makes all manipulations of outstanding_extents much more explicit.
Every successful call to btrfs_delalloc_reserve_metadata _must_ now be
combined with btrfs_release_delalloc_extents, even in the error case, as
that is the only function that actually modifies the
outstanding_extents counter.
The drawback to this is now we are much more likely to have transient
cases where outstanding_extents is much larger than it actually should
be. This could happen before as we manipulated the delalloc bits, but
now it happens basically at every write. This may put more pressure on
the ENOSPC flushing code, but I think making this code simpler is worth
the cost. I have another change coming to mitigate this side-effect
somewhat.
I also added trace points for the counter manipulation. These were used
by a bpf script I wrote to help track down leak issues.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Build-server workloads have hundreds of references per file after dedup.
Multiply by a few snapshots and we quickly exhaust the limit of 2730
references per extent that can fit into a 64K buffer.
Raise the limit to 16M to be consistent with other btrfs ioctls
(e.g. TREE_SEARCH_V2, FILE_EXTENT_SAME).
To minimize surprising userspace behavior, apply this change only to
the LOGICAL_INO_V2 ioctl.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Tested-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that check_extent_in_eb()'s extent offset filter can be turned off,
we need a way to do it from userspace.
Add a 'flags' field to the btrfs_logical_ino_args structure to disable
extent offset filtering, taking the place of one of the existing
reserved[] fields.
Previous versions of LOGICAL_INO neglected to check whether any of the
reserved fields have non-zero values. Assigning meaning to those fields
now may change the behavior of existing programs that left these fields
uninitialized. The lack of a zero check also means that new programs
have no way to know whether the kernel is honoring the flags field.
To avoid these problems, define a new ioctl LOGICAL_INO_V2. We can
use the same argument layout as LOGICAL_INO, but shorten the reserved[]
array by one element and turn it into the 'flags' field. The V2 ioctl
explicitly checks that reserved fields and unsupported flag bits are zero
so that userspace can negotiate future feature bits as they are defined.
Since the memory layouts of the two ioctls' arguments are compatible,
there is no need for a separate function for logical_to_ino_v2 (contrast
with tree_search_v2 vs tree_search where the layout and code are quite
different). A version parameter and an 'if' statement will suffice.
Now that we have a flags field in logical_ino_args, add a flag
BTRFS_LOGICAL_INO_ARGS_IGNORE_OFFSET to get the behavior we want,
and pass it down the stack to iterate_inodes_from_logical.
Motivation and background, copied from the patchset cover letter:
Suppose we have a file with one extent:
root@tester:~# zcat /usr/share/doc/cpio/changelog.gz > /test/a
root@tester:~# sync
Split the extent by overwriting it in the middle:
root@tester:~# cat /dev/urandom | dd bs=4k seek=2 skip=2 count=1 conv=notrunc of=/test/a
We should now have 3 extent refs to 2 extents, with one block unreachable.
The extent tree looks like:
root@tester:~# btrfs-debug-tree /dev/vdc -t 2
[...]
item 9 key (1103101952 EXTENT_ITEM 73728) itemoff 15942 itemsize 53
extent refs 2 gen 29 flags DATA
extent data backref root 5 objectid 261 offset 0 count 2
[...]
item 11 key (1103175680 EXTENT_ITEM 4096) itemoff 15865 itemsize 53
extent refs 1 gen 30 flags DATA
extent data backref root 5 objectid 261 offset 8192 count 1
[...]
and the ref tree looks like:
root@tester:~# btrfs-debug-tree /dev/vdc -t 5
[...]
item 6 key (261 EXTENT_DATA 0) itemoff 15825 itemsize 53
extent data disk byte 1103101952 nr 73728
extent data offset 0 nr 8192 ram 73728
extent compression(none)
item 7 key (261 EXTENT_DATA 8192) itemoff 15772 itemsize 53
extent data disk byte 1103175680 nr 4096
extent data offset 0 nr 4096 ram 4096
extent compression(none)
item 8 key (261 EXTENT_DATA 12288) itemoff 15719 itemsize 53
extent data disk byte 1103101952 nr 73728
extent data offset 12288 nr 61440 ram 73728
extent compression(none)
[...]
There are two references to the same extent with different, non-overlapping
byte offsets:
[------------------72K extent at 1103101952----------------------]
[--8K----------------|--4K unreachable----|--60K-----------------]
^ ^
| |
[--8K ref offset 0--][--4K ref offset 0--][--60K ref offset 12K--]
|
v
[-----4K extent-----] at 1103175680
We want to find all of the references to extent bytenr 1103101952.
Without the patch (and without running btrfs-debug-tree), we have to
do it with 18 LOGICAL_INO calls:
root@tester:~# btrfs ins log 1103101952 -P /test/
Using LOGICAL_INO
inode 261 offset 0 root 5
root@tester:~# for x in $(seq 0 17); do btrfs ins log $((1103101952 + x * 4096)) -P /test/; done 2>&1 | grep inode
inode 261 offset 0 root 5
inode 261 offset 4096 root 5 <- same extent ref as offset 0
(offset 8192 returns empty set, not reachable)
inode 261 offset 12288 root 5
inode 261 offset 16384 root 5 \
inode 261 offset 20480 root 5 |
inode 261 offset 24576 root 5 |
inode 261 offset 28672 root 5 |
inode 261 offset 32768 root 5 |
inode 261 offset 36864 root 5 \
inode 261 offset 40960 root 5 > all the same extent ref as offset 12288.
inode 261 offset 45056 root 5 / More processing required in userspace
inode 261 offset 49152 root 5 | to figure out these are all duplicates.
inode 261 offset 53248 root 5 |
inode 261 offset 57344 root 5 |
inode 261 offset 61440 root 5 |
inode 261 offset 65536 root 5 |
inode 261 offset 69632 root 5 /
In the worst case the extents are 128MB long, and we have to do 32768
iterations of the loop to find one 4K extent ref.
With the patch, we just use one call to map all refs to the extent at once:
root@tester:~# btrfs ins log 1103101952 -P /test/
Using LOGICAL_INO_V2
inode 261 offset 0 root 5
inode 261 offset 12288 root 5
The TREE_SEARCH ioctl allows userspace to retrieve the offset and
extent bytenr fields easily once the root, inode and offset are known.
This is sufficient information to build a complete map of the extent
and all of its references. Userspace can use this information to make
better choices to dedup or defrag.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Tested-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
[ copy background and motivation from cover letter ]
Signed-off-by: David Sterba <dsterba@suse.com>
The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and
offset (encoded as a single logical address) to a list of extent refs.
LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping
(extent ref -> extent bytenr and offset, or logical address). These are
useful capabilities for programs that manipulate extents and extent
references from userspace (e.g. dedup and defrag utilities).
When the extents are uncompressed (and not encrypted and not other),
check_extent_in_eb performs filtering of the extent refs to remove any
extent refs which do not contain the same extent offset as the 'logical'
parameter's extent offset. This prevents LOGICAL_INO from returning
references to more than a single block.
To find the set of extent references to an uncompressed extent from [a, b),
userspace has to run a loop like this pseudocode:
for (i = a; i < b; ++i)
extent_ref_set += LOGICAL_INO(i);
At each iteration of the loop (up to 32768 iterations for a 128M extent),
data we are interested in is collected in the kernel, then deleted by
the filter in check_extent_in_eb.
When the extents are compressed (or encrypted or other), the 'logical'
parameter must be an extent bytenr (the 'a' parameter in the loop).
No filtering by extent offset is done (or possible?) so the result is
the complete set of extent refs for the entire extent. This removes
the need for the loop, since we get all the extent refs in one call.
Add an 'ignore_offset' argument to iterate_inodes_from_logical,
[...several levels of function call graph...], and check_extent_in_eb, so
that we can disable the extent offset filtering for uncompressed extents.
This flag can be set by an improved version of the LOGICAL_INO ioctl to
get either behavior as desired.
There is no functional change in this patch. The new flag is always
false.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor coding style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
We need the actual root for the ref verifier tool to work, so change
these functions to pass the root around instead. This will be used in
a subsequent patch.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We pass in a pointer in our send arg struct, this means the struct size
doesn't match with 32bit user space and 64bit kernel space. Fix this by
adding a compat mode and doing the appropriate conversion.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ move structure to the beginning, next to receive 32bit compat ]
Signed-off-by: David Sterba <dsterba@suse.com>
By setting compression for a defrag task, the task will start IO at
the end of defrag.
After the combo of filemap_flush(), we've already made sure that
dirty pages have made progress via async compress thread because the
second filemap_flush() will wait for page lock, which won't be
unlocked until those pages have been marked as writeback and ordered
extents have been queued.
And this is for per-inode defrag, it's not helpful to wait on a global
%async_delalloc_pages and %nr_async_submits from fs_info.
Although waiting on %nr_async_submits means that all bios are
submitted down to per-device schedule IO lists, it doesn't wait for
their completions, thus users still need to do fsync/sync to make sure
the data is on disk. While with this change, it makes sure that pages
are marked with writeback bits and will be submitted asynchronously
shortly, therefore, the behavior of defrag option '-c' remains unchanged.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If btrfs_transaction_commit fails it will proceed to call
cleanup_transaction, which in turn already does btrfs_abort_transaction.
So let's remove the unnecessary code duplication. Also let's be explicit
about handling failure of btrfs_uuid_tree_add by calling
btrfs_end_transaction.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_udpate_root can fail and it aborts the transaction, the correct
way to handle an aborted transaction is to explicitly end with
btrfs_end_transaction. Even now the code is correct since
btrfs_commit_transaction would handle an aborted transaction but this is
more of an implementation detail. So let's be explicit in handling
failure in btrfs_update_root.
Furthermore btrfs_commit_transaction can also fail and by ignoring it's
return value we could have left the in-memory copy of the root item in
an inconsistent state. So capture the error value which allows us to
correctly revert the RO/RW flags in case of commit failure.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Don't populate the read-only array types on the stack, instead make
it static const. Makes the object code smaller by nearly 60 bytes:
Before:
text data bss dec hex filename
90536 6552 64 97152 17b80 fs/btrfs/ioctl.o
After:
text data bss dec hex filename
90414 6616 64 97094 17b46 fs/btrfs/ioctl.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since TASK_UNINTERRUPTIBLE has been used here, wait_event() can do the
same job.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we're still going to wait after schedule(), we don't have to do
finish_wait() to remove our %wait_queue_entry since prepare_to_wait()
won't add the same %wait_queue_entry twice.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from David Sterba:
"We've collected a bunch of isolated fixes, for crashes, user-visible
behaviour or missing bits from other subsystem cleanups from the past.
The overall number is not small but I was not able to make it
significantly smaller. Most of the patches are supposed to go to
stable"
* 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: log csums for all modified extents
Btrfs: fix unexpected result when dio reading corrupted blocks
btrfs: Report error on removing qgroup if del_qgroup_item fails
Btrfs: skip checksum when reading compressed data if some IO have failed
Btrfs: fix kernel oops while reading compressed data
Btrfs: use btrfs_op instead of bio_op in __btrfs_map_block
Btrfs: do not backup tree roots when fsync
btrfs: remove BTRFS_FS_QUOTA_DISABLING flag
btrfs: propagate error to btrfs_cmp_data_prepare caller
btrfs: prevent to set invalid default subvolid
Btrfs: send: fix error number for unknown inode types
btrfs: fix NULL pointer dereference from free_reloc_roots()
btrfs: finish ordered extent cleaning if no progress is found
btrfs: clear ordered flag on cleaning up ordered extents
Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFO
Btrfs: do not reset bio->bi_ops while writing bio
Btrfs: use the new helper wbc_to_write_flags
btrfs_cmp_data_prepare() (almost) always returns 0 i.e. ignoring errors
from gather_extent_pages(). While the pages are freed by
btrfs_cmp_data_free(), cmp->num_pages still has > 0. Then,
btrfs_extent_same() try to access the already freed pages causing faults
(or violates PageLocked assertion).
This patch just return the error as is so that the caller stop the process.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Fixes: f441460202 ("btrfs: fix deadlock with extent-same and readpage")
Cc: <stable@vger.kernel.org> # 4.2
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
`btrfs sub set-default` succeeds to set an ID which isn't corresponding to any
fs/file tree. If such the bad ID is set to a filesystem, we can't mount this
filesystem without specifying `subvol` or `subvolid` mount options.
Fixes: 6ef5ed0d38 ("Btrfs: add ioctl and incompat flag to set the default mount subvol")
Cc: <stable@vger.kernel.org>
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info->super_copy->{node,sector}size are little-endian, but the ioctl
should return the values in native endianness. Use the cached values in
btrfs_fs_info instead. Found with sparse.
Fixes: 80a773fbfc ("btrfs: retrieve more info from FS_INFO ioctl")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Pull zstd support from Chris Mason:
"Nick Terrell's patch series to add zstd support to the kernel has been
floating around for a while. After talking with Dave Sterba, Herbert
and Phillip, we decided to send the whole thing in as one pull
request.
zstd is a big win in speed over zlib and in compression ratio over
lzo, and the compression team here at FB has gotten great results
using it in production. Nick will continue to update the kernel side
with new improvements from the open source zstd userland code.
Nick has a number of benchmarks for the main zstd code in his lib/zstd
commit:
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB
of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel
Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using
`silesia.tar` [3], which is 211,988,480 B large. Run the following
commands for the benchmark:
sudo modprobe zstd_compress_test
sudo mknod zstd_compress_test c 245 0
sudo cp silesia.tar zstd_compress_test
The time is reported by the time of the userland `cp`.
The MB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Adjusted MB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
The memory reported is the amount of memory the compressor
requests.
| Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) |
|----------|----------|----------|-------|---------|----------|----------|
| none | 11988480 | 0.100 | 1 | 2119.88 | - | - |
| zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 |
| zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 |
| zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 |
| zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 |
| zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 |
| zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 |
| zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 |
| zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 |
| zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 |
| zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 |
I benchmarked zstd decompression using the same method on the same
machine. The benchmark file is located in the upstream zstd repo
under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The
memory reported is the amount of memory required to decompress
data compressed with the given compression level. If you know the
maximum size of your input, you can reduce the memory usage of
decompression irrespective of the compression level.
| Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) |
|----------|----------|---------|---------------|-------------|
| none | 0.025 | 8479.54 | - | - |
| zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 |
| zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 |
| zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 |
| zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 |
| zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 |
| zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 |
| zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 |
| zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 |
I ran a long series of tests and benchmarks on the btrfs side and the
gains are very similar to the core benchmarks Nick ran"
* 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
squashfs: Add zstd support
btrfs: Add zstd support
lib: Add zstd modules
lib: Add xxhash module
The buffer passed to btrfs_ioctl_tree_search* functions have to be at least
sizeof(struct btrfs_ioctl_search_header). If this is not the case then the
ioctl should return -EOVERFLOW and set the uarg->buf_size to the minimum
required size. Currently btrfs_ioctl_tree_search_v2 would return an -EOVERFLOW
error with ->buf_size being set to the value passed by user space. Fix this by
removing the size check and relying on search_ioctl, which already includes it
and correctly sets buf_size.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Readdir does dir_emit while under the btree lock. dir_emit can trigger
the page fault which means we can deadlock. Fix this by allocating a
buffer on opening a directory and copying the readdir into this buffer
and doing dir_emit from outside of the tree lock.
Thread A
readdir <holding tree lock>
dir_emit
<page fault>
down_read(mmap_sem)
Thread B
mmap write
down_write(mmap_sem)
page_mkwrite
wait_ordered_extents
Process C
finish_ordered_extent
insert_reserved_file_extent
try to lock leaf <hang>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy the deadlock scenario to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add new value for compression to distinguish between defrag and
property. Previously, a single variable was used and this caused clashes
when the per-file 'compression' was set and a defrag -c was called.
The property-compression is loaded when the file is open, defrag will
overwrite the same variable and reset to 0 (ie. NONE) at when the file
defragmentaion is finished. That's considered a usability bug.
Now we won't touch the property value, use the defrag-compression. The
precedence of defrag is higher than for property (and whole-filesystem).
Signed-off-by: David Sterba <dsterba@suse.com>
This is preparatory for separating inode compression requested by defrag
and set via properties. This will fix a usability bug when defrag will
reset compression type to NONE. If the file has compression set via
property, it will not apply anymore (until next mount or reset through
command line).
We're going to fix that by adding another variable just for the defrag
call and won't touch the property. The defrag will have higher priority
when deciding whether to compress the data.
Signed-off-by: David Sterba <dsterba@suse.com>
