Commit Graph

77 Commits

Author SHA1 Message Date
Amey Narkhede
0caf60c4b1 mmc: mediatek: Drop pointer to mmc_host from msdc_host
The MediaTek MMC driver uses  pointer to get from private
msdc_host structure to the generic mmc_host structure.
However mmc_host always precedes msdc_host in memory so compute
its address with a subtraction (which is cheaper than a dereference)
using mmc_from_priv() and drop the extra pointer.

Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Link: https://lore.kernel.org/r/20200917192624.548720-1-ameynarkhede03@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-24 14:28:40 +02:00
Douglas Anderson
21b2cec61c mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous
probe") but applied to a whole pile of drivers.  This batch converts
the drivers that appeared to be around in the v4.4 timeframe.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # SH_MMCIF
Tested-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200903162412.1.Id501e96fa63224f77bb86b2135a5e8324ffb9c43@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07 14:20:17 +02:00
Chun-Hung Wu
e282f2045a mmc: mediatek: add pre_enable() and post_disable() hook function
CQHCI_ENABLE bit in CQHCI_CFG should be disabled
after msdc_cqe_disable(), and should be enabled before
msdc_ceq_enable() for MTK platform.
Add hook functions for cqhci_host_ops->pre_enable() and
cqhci_host_ops->post_disable().

Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1598520783-25250-3-git-send-email-chun-hung.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07 09:11:31 +02:00
Wenbin Mei
855d388df2 mmc: mediatek: add optional module reset property
This patch fixs eMMC-Access on mt7622/Bpi-64.
Before we got these Errors on mounting eMMC ion R64:
[   48.664925] blk_update_request: I/O error, dev mmcblk0, sector 204800 op 0x1:(WRITE)
flags 0x800 phys_seg 1 prio class 0
[   48.676019] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write

This patch adds a optional reset management for msdc.
Sometimes the bootloader does not bring msdc register
to default state, so need reset the msdc controller.

Cc: <stable@vger.kernel.org> # v5.4+
Fixes: 966580ad23 ("mmc: mediatek: add support for MT7622 SoC")
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20200814014346.6496-4-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-08-24 09:39:53 +02:00
Wei Yongjun
7f4bc2e868 mmc: mediatek: make function msdc_cqe_disable() static
The sparse tool complains as follows:

drivers/mmc/host/mtk-sd.c:2269:6: warning:
 symbol 'msdc_cqe_disable' was not declared. Should it be static?

This function is not used outside of mtk-sd.c, so this commit
marks it static.

Fixes: 88bd652b3c ("mmc: mediatek: command queue support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://lore.kernel.org/r/20200727171129.2945-1-weiyongjun1@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-08-05 08:28:15 +02:00
Chun-Hung Wu
88bd652b3c mmc: mediatek: command queue support
Support command queue for mt6779 platform.
a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
b. Connect mtk msdc driver to cqhci driver through
   host->cq_host->ops = &msdc_cmdq_ops;
c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
   more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
d. Select kernel config MMC_CQHCI for MMC_MTK

Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Acked-by: Yong Mao <yong.mao@mediatek.com>
Link: https://lore.kernel.org/r/1595205759-5825-4-git-send-email-chun-hung.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24 12:53:33 +02:00
Chun-Hung Wu
557011b6b8 mmc: mediatek: refine msdc timeout api
Extract msdc timeout api common part to have
better code architecture and avoid redundant code.

Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1595205759-5825-3-git-send-email-chun-hung.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24 12:53:33 +02:00
Chun-Hung Wu
7d176b0ea6 mmc: mediatek: add MT6779 MMC driver support
Add new code to support MT6779 mmc driver.

Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://lore.kernel.org/r/1595205759-5825-2-git-send-email-chun-hung.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24 12:53:33 +02:00
Lee Jones
6ec5a7b72e mmc: mtk-sd: Demote msdc_recheck_sdio_irq() function header
No other function in the file is documented using kerneldoc and no
effort to document the function arguments have been made.  It's a
bit of an oddity to say the least.  Let's downgrade it from
kerneldoc to a standard comment block instead.

Fixes the following W=1 kernel build warning:

 drivers/mmc/host/mtk-sd.c:1030: warning: Function parameter or member 'host' not described in 'msdc_recheck_sdio_irq'

Cc: Chaotian Jing <chaotian.jing@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200701124702.908713-6-lee.jones@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13 12:18:25 +02:00
Ulf Hansson
1be64c7963 mmc: host: Drop redundant MMC_CAP_ERASE
The MMC_CAP_ERASE bit is no longer used by the mmc core as erase, discard
and trim operations are now always supported. Therefore, drop the bit and
move all mmc hosts away from using it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20200508112902.23575-1-ulf.hansson@linaro.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-28 11:22:14 +02:00
Marek Vasut
9cbe0fc8cd mmc: host: Prepare host drivers for mmc_regulator_set_vqmmc() returning > 0
Patch all drivers which use mmc_regulator_set_vqmmc() and prepare them for
the fact that mmc_regulator_set_vqmmc() can return a value > 0, which would
happen if the signal voltage switch did NOT happen, because the voltage was
already set correctly.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20200416163649.336967-1-marex@denx.de
[Ulf: Re-worked/simplified the code a bit]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28 11:20:58 +02:00
yong mao
9e2582e574 mmc: mediatek: fix SDIO irq issue
SDIO irq is not triggered by low level, but by falling edge in our
previous IC. This mechanism only have one chance to catch the SDIO irq
if a SDIO irq comes within the multiple block transmission. This SDIO
irq may be easily lost, because falling edge appears only once within 2
clock after data transmission is completed.

SDIO irq recheck mechanism will make sure all irqs can be
processed correctly.

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Link: https://lore.kernel.org/r/1585299097-6897-2-git-send-email-yong.mao@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-27 13:21:30 +01:00
Yangtao Li
bc068d38c9 mmc: mtk-sd: convert to devm_platform_ioremap_resource
Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Link: https://lore.kernel.org/r/20191215175120.3290-12-tiny.windzz@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18 14:55:11 +01:00
Chaotian Jing
8f34e5bd70 mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode
there is a chance that always get response CRC error after HS200 tuning,
the reason is that need set CMD_TA to 2. this modification is only for
MT8173.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: stable@vger.kernel.org
Fixes: 1ede5cb88a ("mmc: mediatek: Use data tune for CMD line tune")
Link: https://lore.kernel.org/r/20191204071958.18553-1-chaotian.jing@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16 12:25:26 +01:00
Ulf Hansson
1c81d69d4c mmc: mtk-sd: Re-store SDIO IRQs mask at system resume
In cases when SDIO IRQs have been enabled, runtime suspend is prevented by
the driver. However, this still means msdc_runtime_suspend|resume() gets
called during system suspend/resume, via pm_runtime_force_suspend|resume().

This means during system suspend/resume, the register context of the mtk-sd
device most likely loses its register context, even in cases when SDIO IRQs
have been enabled.

To re-enable the SDIO IRQs during system resume, the mtk-sd driver
currently relies on the mmc core to re-enable the SDIO IRQs when it resumes
the SDIO card, but this isn't the recommended solution. Instead, it's
better to deal with this locally in the mtk-sd driver, so let's do that.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11 16:10:18 +02:00
yong mao
26c71a13a8 mmc: mediatek: enable SDIO IRQ low level trigger function
SDIO IRQ is not defaultly triggered by low level,
but by falling edge. It needs to set related register
to enable SDIO IRQ low level trigger function.
Otherwise the SDIO IRQ may be lost in some specail condition.

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11 15:58:39 +02:00
Chaotian Jing
6ef042bd00 mmc: mediatek: support 24bits segment size
MSDC IP which support 64G DRAM will support 24bits BDMA buffer length,
so add support it.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11 15:58:39 +02:00
Chaotian Jing
da6e0f7024 mmc: mediatek: fix controller busy when plug out SD
when plug out SD card, may get data CRC error, the MMC core will issue
CMD13 to get card status, then CMD13 timeout(due to card plug out) will
trigger CMD19 tuning, first CMD19 timeout has not call msdc_reset_hw()
and cause the next CMD19 gets controller busy.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11 15:58:39 +02:00
jjian zhou
20314ce30a mmc: mediatek: fix SDIO IRQ detection issue
If cmd19 timeout or response crcerr occurs during execute_tuning(),
it need invoke msdc_reset_hw(). Otherwise SDIO IRQ can't be detected.

Signed-off-by: jjian zhou <jjian.zhou@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Fixes: 5215b2e952 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17 13:26:50 +02:00
jjian zhou
8a5df8ac62 mmc: mediatek: fix SDIO IRQ interrupt handle flow
SDIO IRQ is triggered by low level. It need disable SDIO IRQ
detected function. Otherwise the interrupt register can't be cleared.
It will process the interrupt more.

Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Fixes: 5215b2e952 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17 13:25:44 +02:00
Thomas Gleixner
1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
NeilBrown
d087bde516 mmc: mtk-sd: enable internal card-detect logic.
The mtk-sd silicon has integrated card-detect logic that is
enabled on the MT7621.  The circuit is phased out on newer hardware so
we should be careful to only enabled it on hardware known to support
it.  This a new "use_internal_cd" flag in struct mtk_mmc_compatible.

If the sdhci isn't marked non-removable and doesn't have a
cd-gpio configured, and if use_internal_cd is set, then assume the
internal cd logic should be used as recommended by
 Documentation/devicetree/bindings/mmc/mmc.txt

Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 12:33:03 +02:00
NeilBrown
afb7c7910b mmc: mtk-sd: add support for config found in mt7620 family SOCs.
mt7620 family MIPS SOCs contain the mtk-sd silicon.
Add support for this.

Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 12:33:03 +02:00
NeilBrown
42edb0d5ac mmc: mtk-sd: don't hard-code interrupt trigger type
When using devicetree for configuration, interrupt trigger type
should be described in the dts file, not hard-coded in the C code.

The mtk-sd silicon in the mt7621 soc uses an active-high interrupt
and so cannot be used with the current code.

So replace IRQF_TRIGGER_LOW with IRQF_TRIGGER_NONE.

Also IRQF_ONESHOT is not needed - it is used for threaded interrupt
handlers, and this driver does not used a threaded interrupt handler.
So remove that setting.

Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 12:33:03 +02:00
Fabien Parent
b65be63551 mmc: mtk-sd: check for valid optional memory resource
'top_base' memory region is optional. Check that the resource is valid
before using it. This avoid getting a "invalid resource" error message
printed by the kernel.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15 11:55:54 +02:00
Fabien Parent
89822b7354 mmc: mtk-sd: add support for MT8516
Add the MSDC configuration for the MT8516 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15 11:55:54 +02:00
Chaotian Jing
3751e008da mmc: mediatek: fix incorrect register setting of hs400_cmd_int_delay
to set cmd internal delay, need set PAD_TUNE register but not PAD_CMD_TUNE
register.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Fixes: 1ede5cb88a ("mmc: mediatek: Use data tune for CMD line tune")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-01-28 12:49:28 +01:00
jjian zhou
5215b2e952 mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
This patch enables support SDIO IRQs. It enables
MMC_CAP_SDIO_IRQ & MMC_CAP2_SDIO_IRQ_NOTHREAD
and implement the ->ack_sdio_irq callback.

Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-19 10:16:15 +01:00
Chaotian Jing
fd82cc3020 mmc: mediatek: drop too much code of tuning method
the tuning code is becoming more and more bloated, let's make the
set cmd/data delay to inline function to avoid too much redundant code.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
a2e6d1f6b3 mmc: mediatek: add MT8183 MMC driver support
MT8183 puts the tune register at top layer, so need add new code
to support it.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
86601d0eac mmc: mediatek: tune CMD/DATA together
for MSDC IP which supports both data tune and async fifo, it can
tune cmd/data together. which can save the time and make the tune
result of CMD more stable as data line are 4bit or 8bit.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
f38a9774dd mmc: mediatek: fix cannot receive new request when msdc_cmd_is_ready fail
when msdc_cmd_is_ready return fail, the req_timeout work has not been
inited and cancel_delayed_work() will return false, then, the request
return directly and never call mmc_request_done().

so need call mod_delayed_work() before msdc_cmd_is_ready()

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
56f6cbbed0 mmc: mediatek: fill the actual clock for mmc debugfs
as the mmc core layer has the mmc->actual_clock, so fill it
and drop msdc_host->sclk.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
258bac4a61 mmc: mediatek: add bus_clk control
when gate MSDC0_HCLK, access register will hang, even the MSDC driver
will never accessing register after HCLK was gated, but for safety, need
gate the bus_clk(which used to access register) too.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08 12:53:24 +02:00
Chaotian Jing
2a9bde19e0 mmc: mediatek: add 64G DRAM DMA support
MT2712 MSDC supports 64G DRAM DMA access, it needs update
gpd/bd structure.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-02 15:08:51 +02:00
Ryder Lee
909b345665 mmc: mediatek: use of_device_get_match_data()
The usage of of_device_get_match_data() reduce the code size a bit.

Also, the only way to call msdc_drv_probe() is to match an entry in
msdc_of_ids[], so of_id cannot be NULL.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-02 15:08:48 +02:00
Sean Wang
966580ad23 mmc: mediatek: add support for MT7622 SoC
Just applying the existing logic and adding its own characteristics into
the space pointed by an extra entry of struct of_device_id to have support
of MT7622 SoC.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Jumin Li <jumin.li@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-03-05 13:04:34 +01:00
Chaotian Jing
6b10c9abfb mmc: mediatek: perfer to use rise edge latching for cmd line
data lines have applied to perfer to use rise edge, also need
apply it to cmd line.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:27 +01:00
Chaotian Jing
c8609b2252 mmc: mediatek: improve eMMC hs400 mode read performance
enlarge outstanding value to improve read performance

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:26 +01:00
Chaotian Jing
d17bb71c2c mmc: mediatek: add latch-ck support
some platform(eg.mt2701) does not support "stop clk fix", in
this case, need set correct latch-ck to avoid crc error caused
by stop clock block-internally.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:26 +01:00
Chaotian Jing
3c1a884436 mmc: mediatek: add support of source_cg clock
source clock need an independent cg to control, when doing clk mode
switch, need gate source clock to avoid hw issue(multi-bit sync hw hang)

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:25 +01:00
Chaotian Jing
d9dcbfc880 mmc: mediatek: add stop_clk fix and enhance_rx support
mt2712 supports stop_clk fix and enhance_rx, which can improve
host stability.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:25 +01:00
Chaotian Jing
acde28c434 mmc: mediatek: add busy_check support
bit7 of PATCH_BIT1 has different meaning in new design, to
compatible with previous platform, clear this bit in new
platform.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:24 +01:00
Chaotian Jing
2fea581926 mmc: mediatek: add async fifo and data tune support
mt2701/mt2712 supports async fifo & data tune, which can improve
host stability.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:24 +01:00
Chaotian Jing
39add2521f mmc: mediatek: add pad_tune0 support
from mt2701, the register of PAD_TUNE has been phased out,
while there is a new register of PAD_TUNE0

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:23 +01:00
Chaotian Jing
7f3d58523d mmc: mediatek: make hs400_tune_response only for mt8173
the origin design of hs400_tune_response is for mt8173 because of
mt8173 has a special design. for doing that, we add a new member
"compatible", by now it's only for mt8173.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02 15:20:23 +01:00
Chaotian Jing
762d491a8b mmc: mediatek: add support of mt2701/mt2712
mt2701/mt2712 has 12bit clock div, which is not compatible with
mt8135/mt8173. and, some additional features will be added in
mt2701/mt2712, so that need distinguish it by comatibale name.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30 12:02:44 +01:00
Wolfram Sang
2f98ef63b1 mmc: mtk-sd: catch all errors when getting regulators
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30 11:50:35 +01:00
Julia Lawall
be7815d688 mmc: mediatek: constify mmc_host_ops structures
The mmc_host_ops structure is only stored in the ops field of an
mmc_host structure, which is declared as const.  Thus the mmc_host_ops
structure itself can be const.

Done with the help of Coccinelle.

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct mmc_host_ops i@p = { ... };

@ok1@
struct mmc_host *mmc;
identifier r.i;
position p;
@@
mmc->ops = &i@p

@bad@
position p != {r.p,ok1.p};
identifier r.i;
struct mmc_host_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct mmc_host_ops i = { ... };
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30 14:01:44 +02:00
Chaotian Jing
c7b16deec9 mmc: mediatek: add ops->get_cd() support
if user plug out sd card slowly, finally card is plugged out but
cat /proc/partitions can find that card is still exist in kernel.
that's because alougth get card detect interrupt but CMD13 still
can get correct response(all other pins are connected expect card
detect pin).
add ops->get_cd() can avoid this issue.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30 14:01:27 +02:00