Extend module command for function filter selection with globbing.
It uses the same globbing as function filter.
sh# echo '*alloc*:mod:*' > set_ftrace_filter
Will trace any function with the letters 'alloc' in the name in any
module but not in kernel.
sh# echo '!*alloc*:mod:ipv6' >> set_ftrace_filter
Will prevent from tracing functions with 'alloc' in the name from module
ipv6 (do not forget to append to set_ftrace_filter file).
sh# echo '*alloc*:mod:!ipv6' > set_ftrace_filter
Will trace functions with 'alloc' in the name from kernel and any
module except ipv6.
sh# echo '*alloc*:mod:!*' > set_ftrace_filter
Will trace any function with the letters 'alloc' in the name only from
kernel, but not from any module.
sh# echo '*:mod:!*' > set_ftrace_filter
or
sh# echo ':mod:!' > set_ftrace_filter
Will trace every function in the kernel, but will not trace functions
from any module.
sh# echo '*:mod:*' > set_ftrace_filter
or
sh# echo ':mod:' > set_ftrace_filter
As the opposite will trace all functions from all modules, but not from
kernel.
sh# echo '*:mod:*snd*' > set_ftrace_filter
Will trace your sound drivers only (if any).
Link: http://lkml.kernel.org/r/1443545176-3215-4-git-send-email-0x7f454c46@gmail.com
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ Made format changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_match parameters are very related and I reduce the number of local
variables & parameters with it.
This is also preparation for module globbing as it would introduce more
realated variables & parameters.
Link: http://lkml.kernel.org/r/1443545176-3215-3-git-send-email-0x7f454c46@gmail.com
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ Made some formatting changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
"Not" is too abstract variable name - changed to clear_filter.
Removed ftrace_match_module_records function: comparison with !* or *
not does the general code in filter_parse_regex() as it works without
mod command for
sh# echo '!*' > /sys/kernel/debug/tracing/set_ftrace_filter
Link: http://lkml.kernel.org/r/1443545176-3215-2-git-send-email-0x7f454c46@gmail.com
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
By now there isn't any subcommand for mod.
Before:
sh$ echo '*:mod:ipv6:a' > set_ftrace_filter
sh$ echo '*:mod:ipv6' > set_ftrace_filter
had the same results, but now first will result in:
sh$ echo '*:mod:ipv6:a' > set_ftrace_filter
-bash: echo: write error: Invalid argument
Also, I clarified ftrace_mod_callback code a little.
Link: http://lkml.kernel.org/r/1443545176-3215-1-git-send-email-0x7f454c46@gmail.com
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ converted 'if (ret == 0)' to 'if (!ret)' ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To cover the common case of sorting an array of pointers, Daniel
Wagner recently modified the library sort() to use a specific swap
function for size==8, in addition to the size==4 case which was
already handled. Since sizeof(long) is either 4 or 8,
ftrace_swap_ips() is redundant and we can just let sort() pick an
appropriate and fast swap callback.
Link: http://lkml.kernel.org/r/1441834023-13130-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The kernel now has kstrdup_const/kfree_const for reusing .rodata
(typically string literals) when possible; there's no reason to
duplicate that logic in the tracing system. Moreover, as the comment
above core_kernel_data states, it may not always return true for
.rodata - that is for example the case on x86_64, where we thus end up
kstrdup'ing all the passed-in strings.
Arguably, testing for .rodata explicitly (as kstrdup_const does) is
also more correct: I don't think one is supposed to be able to change
the name after creating the event_subsystem by passing the address of
a static char (but non-const) array.
Link: http://lkml.kernel.org/r/1441833841-12955-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the tracer options to instances options directory as well. Only add the
options for tracers that are allowed to be enabled by an instance. But note,
that tracer options are global. That is, tracer options enabled in an
instance, also take affect at the top level and in other instances.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allow instances to have their own options, at least for the core options
(non tracer specific ones). There are a few global options that should not
be added to instances, like enabling of trace_printk, and the sched comm
recording, which do not have a specific trace instance associated to them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for the multi buffer instances to have their own trace_flags,
the check in ftrace_trace_stack() needs to test the trace_array descriptor
flag that is for the current event, not the global_trace descriptor.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation of having the multi buffer instances having their own trace
option flags, the trace option files needs a way to not only pass in the
flag they represent, but also the trace_array descriptor.
A new field is added to the trace_array descriptor called trace_flags_index,
which is a 32 byte character array representing a bit. This array is simply
filled with the index of the array, where
index_array[n] = n;
Then the address of this array is passed to the file callbacks instead of
the index of the flag index. Then to retrieve both the flag index and the
trace_array descriptor:
data is the passed in argument.
index = *(unsigned char *)data;
data -= index;
/* Now data points to the address of the array in the trace_array */
tr = container_of(data, struct trace_array, trace_flags_index);
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation to make trace options per instance, the global trace_flags
needs to be moved from being a global variable to a field within the trace
instance trace_array structure.
There's still more work to do, as there's some functions that use
trace_flags without passing in a way to get to the current_trace array. For
those, the global_trace is used directly (from trace.c). This includes
setting and clearing the trace_flags. This means that when a new instance is
created, it just gets the trace_flags of the global_trace and will not be
able to modify them. Depending on the functions that have access to the
trace_array, the flags of an instance may not affect parts of its trace,
where the global_trace is used. These will be fixed in future changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The sleep-time and graph-time options are only for the function graph tracer
and are not used by anything else. As tracer options are now visible when
the tracer is not activated, its better to move the function graph specific
tracer options into the function graph tracer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the effort to move the global trace_flags to the tracing instances, the
direct access to trace_flags must be removed from trace_printk.c
Instead, add a new trace_printk_enabled boolean that is set by a new access
function trace_printk_control(), that will enable or disable trace_printk.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a enum that denotes the last bit of the trace_flags and have a
BUILD_BUG_ON(last_bit > 32).
If we add more bits than we have in trace_flags, the kernel wont build.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are options that are unique to a specific tracer (like function and
function graph). Currently, these options are only visible in the options
directory when the tracer is enabled.
This has been a pain, especially for something like the func_stack_trace
option that if used inappropriately, could bring the system to a crawl. But
the only way to see it, is to enable the function tracer.
For example, if one had done:
# cd /sys/kernel/tracing
# echo __schedule > set_ftrace_filter
# echo 1 > options/func_stack_trace
# echo function > current_tracer
The __schedule call will be traced and a stack trace will also be recorded
there. Now when you were done, you may do...
# echo nop > current_tracer
# echo > set_ftrace_filter
But you forgot to disable the func_stack_trace. The only way to disable it
is to re-enable function tracing first. If you do not add a filter to
set_ftrace_filter and just do:
# echo function > current_tracer
Now you would be performing a stack trace on *every* function! On some
systems, that causes a live lock. Others may take a few minutes to fix your
mistake.
Having the func_stack_trace option visible allows you to check it and
disable it before enabling the funtion tracer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Only create the stacktrace trace option when CONFIG_STACKTRACE is
configured.
Cleaned up the ftrace_trace_stack() function call a little to allow better
encapsulation of the stacktrace trace flag.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the function tracer is not compiled in, do not create the option files
for it.
Fix up both the sched_wakeup and irqsoff tracers to handle the change.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use a cute little macro trick to keep the names of the trace flags file
guaranteed to match the corresponding masks.
The macro TRACE_FLAGS is defined as a serious of enum names followed by
the string name of the file that matches it. For example:
#define TRACE_FLAGS \
C(PRINT_PARENT, "print-parent"), \
C(SYM_OFFSET, "sym-offset"), \
C(SYM_ADDR, "sym-addr"), \
C(VERBOSE, "verbose"),
Now we can define the following:
#undef C
#define C(a, b) TRACE_ITER_##a##_BIT
enum trace_iterator_bits { TRACE_FLAGS };
The above creates:
enum trace_iterator_bits {
TRACE_ITER_PRINT_PARENT_BIT,
TRACE_ITER_SYM_OFFSET_BIT,
TRACE_ITER_SYM_ADDR_BIT,
TRACE_ITER_VERBOSE_BIT,
};
Then we can redefine C as:
#undef C
#define C(a, b) TRACE_ITER_##a = (1 << TRACE_ITER_##a##_BIT)
enum trace_iterator_flags { TRACE_FLAGS };
Which creates:
enum trace_iterator_flags {
TRACE_ITER_PRINT_PARENT = (1 << TRACE_ITER_PRINT_PARENT_BIT),
TRACE_ITER_SYM_OFFSET = (1 << TRACE_ITER_SYM_OFFSET_BIT),
TRACE_ITER_SYM_ADDR = (1 << TRACE_ITER_SYM_ADDR_BIT),
TRACE_ITER_VERBOSE = (1 << TRACE_ITER_VERBOSE_BIT),
};
Then finally we can create the list of file names:
#undef C
#define C(a, b) b
static const char *trace_options[] = {
TRACE_FLAGS
NULL
};
Which creates:
static const char *trace_options[] = {
"print-parent",
"sym-offset",
"sym-addr",
"verbose",
NULL
};
The importance of this is that the strings match the bit index.
trace_options[TRACE_ITER_SYM_ADDR_BIT] == "sym-addr"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Using enums with FLAG_BIT and then defining a FLAG = (1 << FLAG_BIT), is a
bit more robust as we require that there are no bits out of order or skipped
to match the file names that represent the bits.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There was a time where the function tracing would disable interrupts unless
specifically told not to, where it would only disable preemption. With the
new lockless code, the function tracing never disalbes interrupts and just
uses disabling of preemption. Remove the option "ftrace_preempt" as it does
nothing anyway.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to facilitate making all tracer options visible even when the
tracer is not active, we need to get rid of duplicate options. Any option
that is shared between multiple tracers really should be a main option.
As the wakeup and irqsoff tracers both use the "display-graph" option, and
use it exactly the same way, move that option from the tracer options to the
main options and consolidate them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
seq_print_user_ip() is used in only one location in one file. Turn it into a
static function. We could inject its code into the caller, but that would
make the code a bit too complex. Keep the code separate.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
seq_print_userip_objs() is used only in one location, in one file. Instead
of having it as an external function, go one further than making it static,
but inject is code into its only user. It doesn't make the calling function
much more complex.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for having trace options be per instance, the trace_array
needs to be passed to the trace_buffer_unlock_commit(). The
trace_event_buffer_lock_reserve() already passes in the trace_event_file
where the trace_array can be derived from.
Also added a "__init" to the boot up test event plus function tracing
function function_test_events_call().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_trace_stack_regs() is used in only one place, and because that is
such a simple function, just move its code into the location that it was
used in (trace_buffer_unlock_commit_regs()).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch makes is_good_name return bool to improve readability
due to this particular function only using either one or zero as its
return value.
No functional change.
Link: http://lkml.kernel.org/r/1442929393-4753-2-git-send-email-bywxiaobai@163.com
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The changes with more meat are:
o Allowing the trace event filters to filter on CPU number and process ids
o Two new markers for trace output latency were added
(10 and 100 msec latencies)
o Have tracing_thresh filter function profiling time
I also worked on modifying the ring buffer code for some future
work, and moved the adding of the timestamp around. One of my changes
caused a regression, and since other changes were built on top of it
and already tested, I had to operate a revert of that change. Instead
of rebasing, this change set has the code that caused a regression
as well as the code to revert that change without touching the other
changes that were made on top of it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV6aZEAAoJEEjnJuOKh9ldrR4H/A1RcQf1prLLoUibPP4w3lat
dmQcdpS1NY+cqyiKuKPAOkFDGQL7qWzRqZ8whcPSJIsHq57ufqNSLf+0bbQYPzg9
g3CgGL7OApmGi5ulj0sNxhadvc9TFm/SAN0nVJlNuUWdm8e1UWHLsrJZaMfopu2r
RDEtkOhg619mhDL4rktNdS6rk0B92Fhu2o2PwLZPVlUl1NNEt4WJU+ejitXUVO1A
Nb70/rTGGJKtyHbW+74on4LnEN5Uu0Viu6rMwGfYyIgRmC2otdBDvE4xfKMiTUKr
SzBjzrhIoMIRn4Vl0vElfulkpYaw7pcC2BdpZ4d9VpIOiLSlZs0x/TgCtpFEv5M=
=baZ3
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing update from Steven Rostedt:
"Mostly this is just clean ups and micro optimizations.
The changes with more meat are:
- Allowing the trace event filters to filter on CPU number and
process ids
- Two new markers for trace output latency were added (10 and 100
msec latencies)
- Have tracing_thresh filter function profiling time
I also worked on modifying the ring buffer code for some future work,
and moved the adding of the timestamp around. One of my changes
caused a regression, and since other changes were built on top of it
and already tested, I had to operate a revert of that change. Instead
of rebasing, this change set has the code that caused a regression as
well as the code to revert that change without touching the other
changes that were made on top of it"
* tag 'trace-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated"
tracing: Don't make assumptions about length of string on task rename
tracing: Allow triggers to filter for CPU ids and process names
ftrace: Format MCOUNT_ADDR address as type unsigned long
tracing: Introduce two additional marks for delay
ftrace: Fix function_graph duration spacing with 7-digits
ftrace: add tracing_thresh to function profile
tracing: Clean up stack tracing and fix fentry updates
ring-buffer: Reorganize function locations
ring-buffer: Make sure event has enough room for extend and padding
ring-buffer: Get timestamp after event is allocated
ring-buffer: Move the adding of the extended timestamp out of line
ring-buffer: Add event descriptor to simplify passing data
ftrace: correct the counter increment for trace_buffer data
tracing: Fix for non-continuous cpu ids
tracing: Prefer kcalloc over kzalloc with multiply
Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that the lightweight tunnels infrastructure has been voted
networking change of the year. But what do I know?
1) Add conntrack support to openvswitch, from Joe Stringer.
2) Initial support for VRF (Virtual Routing and Forwarding), which
allows the segmentation of routing paths without using multiple
devices. There are some semantic kinks to work out still, but
this is a reasonably strong foundation. From David Ahern.
3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.
4) Ignore route nexthops with a link down state in ipv6, just like
ipv4. From Andy Gospodarek.
5) Remove spinlock from fast path of act_gact and act_mirred, from
Eric Dumazet.
6) Document the DSA layer, from Florian Fainelli.
7) Add netconsole support to bcmgenet, systemport, and DSA. Also
from Florian Fainelli.
8) Add Mellanox Switch Driver and core infrastructure, from Jiri
Pirko.
9) Add support for "light weight tunnels", which allow for
encapsulation and decapsulation without bearing the overhead of a
full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of
others.
10) Add Identifier Locator Addressing support for ipv6, from Tom
Herbert.
11) Support fragmented SKBs in iwlwifi, from Johannes Berg.
12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.
13) Add BQL support to 3c59x driver, from Loganaden Velvindron.
14) Stop using a zero TX queue length to mean that a device shouldn't
have a qdisc attached, use an explicit flag instead. From Phil
Sutter.
15) Use generic geneve netdevice infrastructure in openvswitch, from
Pravin B Shelar.
16) Add infrastructure to avoid re-forwarding a packet in software
that was already forwarded by a hardware switch. From Scott
Feldman.
17) Allow AF_PACKET fanout function to be implemented in a bpf
program, from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
net: fec: clear receive interrupts before processing a packet
ipv6: fix exthdrs offload registration in out_rt path
xen-netback: add support for multicast control
bgmac: Update fixed_phy_register()
sock, diag: fix panic in sock_diag_put_filterinfo
flow_dissector: Use 'const' where possible.
flow_dissector: Fix function argument ordering dependency
ixgbe: Resolve "initialized field overwritten" warnings
ixgbe: Remove bimodal SR-IOV disabling
ixgbe: Add support for reporting 2.5G link speed
ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
ixgbe: support for ethtool set_rxfh
ixgbe: Avoid needless PHY access on copper phys
ixgbe: cleanup to use cached mask value
ixgbe: Remove second instance of lan_id variable
ixgbe: use kzalloc for allocating one thing
flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
ixgbe: Remove unused PCI bus types
...
The commit a4543a2fa9 "ring-buffer: Get timestamp after event is
allocated" is needed for some future work. But after adding it, there is a
race somewhere that causes the saved timestamp to have a slight shift, and
get ahead of the actual timestamp and make it look like time goes backwards.
I'm still looking into why this happens, but in the mean time, this is
holding up other work to get in. I'm reverting the change for now (which
makes the problem go away), and will add it back after I know what is wrong
and fix it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull core block updates from Jens Axboe:
"This first core part of the block IO changes contains:
- Cleanup of the bio IO error signaling from Christoph. We used to
rely on the uptodate bit and passing around of an error, now we
store the error in the bio itself.
- Improvement of the above from myself, by shrinking the bio size
down again to fit in two cachelines on x86-64.
- Revert of the max_hw_sectors cap removal from a revision again,
from Jeff Moyer. This caused performance regressions in various
tests. Reinstate the limit, bump it to a more reasonable size
instead.
- Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me.
Most devices have huge trim limits, which can cause nasty latencies
when deleting files. Enable the admin to configure the size down.
We will look into having a more sane default instead of UINT_MAX
sectors.
- Improvement of the SGP gaps logic from Keith Busch.
- Enable the block core to handle arbitrarily sized bios, which
enables a nice simplification of bio_add_page() (which is an IO hot
path). From Kent.
- Improvements to the partition io stats accounting, making it
faster. From Ming Lei.
- Also from Ming Lei, a basic fixup for overflow of the sysfs pending
file in blk-mq, as well as a fix for a blk-mq timeout race
condition.
- Ming Lin has been carrying Kents above mentioned patches forward
for a while, and testing them. Ming also did a few fixes around
that.
- Sasha Levin found and fixed a use-after-free problem introduced by
the bio->bi_error changes from Christoph.
- Small blk cgroup cleanup from Viresh Kumar"
* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
blk: Fix bio_io_vec index when checking bvec gaps
block: Replace SG_GAPS with new queue limits mask
block: bump BLK_DEF_MAX_SECTORS to 2560
Revert "block: remove artifical max_hw_sectors cap"
blk-mq: fix race between timeout and freeing request
blk-mq: fix buffer overflow when reading sysfs file of 'pending'
Documentation: update notes in biovecs about arbitrarily sized bios
block: remove bio_get_nr_vecs()
fs: use helper bio_add_page() instead of open coding on bi_io_vec
block: kill merge_bvec_fn() completely
md/raid5: get rid of bio_fits_rdev()
md/raid5: split bio for chunk_aligned_read
block: remove split code in blkdev_issue_{discard,write_same}
btrfs: remove bio splitting and merge_bvec_fn() calls
bcache: remove driver private bio splitting code
block: simplify bio_add_page()
block: make generic_make_request handle arbitrarily sized bios
blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
block: don't access bio->bi_error after bio_put()
block: shrink struct bio down to 2 cache lines again
...
Pull scheduler updates from Ingo Molnar:
"The biggest change in this cycle is the rewrite of the main SMP load
balancing metric: the CPU load/utilization. The main goal was to make
the metric more precise and more representative - see the changelog of
this commit for the gory details:
9d89c257df ("sched/fair: Rewrite runnable load and utilization average tracking")
It is done in a way that significantly reduces complexity of the code:
5 files changed, 249 insertions(+), 494 deletions(-)
and the performance testing results are encouraging. Nevertheless we
need to keep an eye on potential regressions, since this potentially
affects every SMP workload in existence.
This work comes from Yuyang Du.
Other changes:
- SCHED_DL updates. (Andrea Parri)
- Simplify architecture callbacks by removing finish_arch_switch().
(Peter Zijlstra et al)
- cputime accounting: guarantee stime + utime == rtime. (Peter
Zijlstra)
- optimize idle CPU wakeups some more - inspired by Facebook server
loads. (Mike Galbraith)
- stop_machine fixes and updates. (Oleg Nesterov)
- Introduce the 'trace_sched_waking' tracepoint. (Peter Zijlstra)
- sched/numa tweaks. (Srikar Dronamraju)
- misc fixes and small cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
sched/deadline: Fix comment in enqueue_task_dl()
sched/deadline: Fix comment in push_dl_tasks()
sched: Change the sched_class::set_cpus_allowed() calling context
sched: Make sched_class::set_cpus_allowed() unconditional
sched: Fix a race between __kthread_bind() and sched_setaffinity()
sched: Ensure a task has a non-normalized vruntime when returning back to CFS
sched/numa: Fix NUMA_DIRECT topology identification
tile: Reorganize _switch_to()
sched, sparc32: Update scheduler comments in copy_thread()
sched: Remove finish_arch_switch()
sched, tile: Remove finish_arch_switch
sched, sh: Fold finish_arch_switch() into switch_to()
sched, score: Remove finish_arch_switch()
sched, avr32: Remove finish_arch_switch()
sched, MIPS: Get rid of finish_arch_switch()
sched, arm: Remove finish_arch_switch()
sched/fair: Clean up load average references
sched/fair: Provide runnable_load_avg back to cfs_rq
sched/fair: Remove task and group entity load when they are dead
sched/fair: Init cfs_rq's sched_entity load average
...
generalize FETCH_FUNC_NAME(memory, string) into
strncpy_from_unsafe() and fix sparse warnings that were
present in original implementation.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By extending the filter rules by more generic fields
we can write triggers filters like
echo 'stacktrace if cpu == 1' > \
/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
or
echo 'stacktrace if comm == sshd' > \
/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
CPU and COMM are not part of struct trace_entry. We could add the two
new fields to ftrace_common_field list and fix up all depending
sides. But that looks pretty ugly. Another thing I would like to
avoid that the 'format' file contents changes.
All this can be avoided by introducing another list which contains
non field members of struct trace_entry.
Link: http://lkml.kernel.org/r/1439210146-24707-1-git-send-email-daniel.wagner@bmw-carit.de
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to the perf_event_map_fd and index, the function
bpf_perf_event_read() can convert the corresponding map
value to the pointer to struct perf_event and return the
Hardware PMU counter value.
Signed-off-by: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By copying BPF related operation to uprobe processing path, this patch
allow users attach BPF programs to uprobes like what they are already
doing on kprobes.
After this patch, users are allowed to use PERF_EVENT_IOC_SET_BPF on a
uprobe perf event. Which make it possible to profile user space programs
and kernel events together using BPF.
Because of this patch, CONFIG_BPF_EVENTS should be selected by
CONFIG_UPROBE_EVENT to ensure trace_call_bpf() is compiled even if
KPROBE_EVENT is not set.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu reported that since 317f394160 ("sched: Move the second half
of ttwu() to the remote cpu") trace_sched_wakeup() can happen out of
context of the waker.
This is a problem when you want to analyse wakeup paths because it is
now very hard to correlate the wakeup event to whoever issued the
wakeup.
OTOH trace_sched_wakeup() is issued at the point where we set
p->state = TASK_RUNNING, which is right were we hand the task off to
the scheduler, so this is an important point when looking at
scheduling behaviour, up to here its been the wakeup path everything
hereafter is due to scheduler policy.
To bridge this gap, introduce a second tracepoint: trace_sched_waking.
It is guaranteed to be called in the waker context.
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Francis Giraldeau <francis.giraldeau@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150609091336.GQ3644@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 4104d326b6 ("ftrace: Remove global function list and call function
directly") simplified the ftrace code by removing the global_ops list with a
new design. But this cleanup also broke the filtering of PIDs that are added
to the set_ftrace_pid file.
Add back the proper hooks to have pid filtering working once again.
Cc: stable@vger.kernel.org # 3.16+
Reported-by: Matt Fleming <matt@console-pimps.org>
Reported-by: Richard Weinberger <richard.weinberger@gmail.com>
Tested-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A fine granulity support for delay would be very useful when profiling
VM logics, such as page allocation including page reclaim and memory
compaction with function graph.
Thus, this patch adds two additional marks with two changes.
- An equal sign in mark selection function is removed to align code
behavior with comments and documentation.
- The function graph example related to delay in ftrace.txt is updated
to cover all supported marks.
Link: http://lkml.kernel.org/r/1436626300-1679-3-git-send-email-jungseoklee85@gmail.com
Cc: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Jungseok Lee noticed the following:
Currently, row's width of 7-digit duration numbers not aligned with
other cases like the following example.
3) $ 3999884 us | }
3) | finish_task_switch() {
3) 0.365 us | _raw_spin_unlock_irq();
3) 3.333 us | }
3) $ 3999976 us | }
3) $ 3999979 us | } /* schedule */
As adding a single white space in case of 7-digit numbers, the format
could be unified easily as follows.
3) $ 2237472 us | }
3) | finish_task_switch() {
3) 0.364 us | _raw_spin_unlock_irq();
3) 3.125 us | }
3) $ 2237556 us | }
3) $ 2237559 us | } /* schedule */
Instead of making a special case for 7-digit numbers, the logic
of the len and the space loop is slightly modified to make the
two cases have the same format.
Link: http://lkml.kernel.org/r/1436626300-1679-2-git-send-email-jungseoklee85@gmail.com
Reported-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch extends tracing_thresh functionality to function profile tracer.
If tracing_thresh is set, print those entries only,
whose average is > tracing thresh.
Link: http://lkml.kernel.org/r/1434972488-8571-1-git-send-email-umesh.t@samsung.com
Signed-off-by: Umesh Tiwari <umesh.t@samsung.com>
[ Removed unnecessary 'moved' comment ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Akashi Takahiro was porting the stack tracer to arm64 and found some
issues with it. One was that it repeats the top function, due to the
stack frame added by the mcount caller and added by itself. This
was added when fentry came in, and before fentry created its own stack
frame. But x86's fentry now creates its own stack frame, and there's
no need to insert the function again.
This also cleans up the code a bit, where it doesn't need to do something
special for fentry, and doesn't include insertion of a duplicate
entry for the called function being traced.
Link: http://lkml.kernel.org/r/55A646EE.6030402@linaro.org
Some-suggestions-by: Jungseok Lee <jungseoklee85@gmail.com>
Some-suggestions-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Functions in ring-buffer.c have gotten interleaved between different
use cases. Move the functions around to get like functions closer
together. This may or may not help gcc keep cache locality, but it
makes it a little easier to work with the code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that events only add time extends after it is committed, in case
an event comes in before it can discard the allocated event, the time
extend needs to be stored within the event. If the event is bigger
than then size needed for the time extend, padding must be added.
The minimum padding size is 8 bytes. Thus if the event is 12 bytes
(size of time extend + 4), there will not be enough room to add both
the time extend and padding. Make sure all events are either 8 bytes
or 16 or more bytes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
