Non-incrementing writes can fail if register + length crosses page
border. However for non-incrementing writes we should not check for page
border crossing. Fix this by passing additional flag to _regmap_raw_write
and passing length to _regmap_select_page basing on the flag.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: cdf6b11daa ("regmap: Add regmap_noinc_write API")
Link: https://lore.kernel.org/r/20200917153405.3139200-2-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Non-incrementing reads can fail if register + length crosses page
border. However for non-incrementing reads we should not check for page
border crossing. Fix this by passing additional flag to _regmap_raw_read
and passing length to _regmap_select_page basing on the flag.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 74fe7b551f ("regmap: Add regmap_noinc_read API")
Link: https://lore.kernel.org/r/20200917153405.3139200-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94cc89eb8f ("regmap: debugfs: Fix handling of name string for debugfs init delays")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200918112002.15216-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In regmap_debugfs_init the initialisation of the debugfs is delayed
if the root node isn't ready yet. Most callers of regmap_debugfs_init
pass the name from the regmap_config, which is considered temporary
ie. may be unallocated after the regmap_init call returns. This leads
to a potential use after free, where config->name has been freed by
the time it is used in regmap_debugfs_initcall.
This situation can be seen on Zynq, where the architecture init_irq
callback registers a syscon device, using a local variable for the
regmap_config. As init_irq is very early in the platform bring up the
regmap debugfs root isn't ready yet. Although this doesn't crash it
does result in the debugfs entry not having the correct name.
Regmap already sets map->name from config->name on the regmap_init
path and the fact that a separate field is used to pass the name
to regmap_debugfs_init appears to be an artifact of the debugfs
name being added before the map name. As such this patch updates
regmap_debugfs_init to use map->name, which is already duplicated from
the config avoiding the issue.
This does however leave two lose ends, both regmap_attach_dev and
regmap_reinit_cache can be called after a regmap is registered and
would have had the effect of applying a new name to the debugfs
entries. In both of these cases it was chosen to update the map
name. In the case of regmap_attach_dev there are 3 users that
currently use this function to update the name, thus doing so avoids
changes for those users and it seems reasonable that attaching
a device would want to set the name of the map. In the case of
regmap_reinit_cache the primary use-case appears to be devices that
need some register access to identify the device (for example devices
in the same family) and then update the cache to match the exact
hardware. Whilst no users do currently update the name here, given the
use-case it seemed reasonable the name might want to be updated once
the device is better identified.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200917120828.12987-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a regmap has "fast_io" set then its lock function uses a spinlock.
That doesn't work so well with the functions:
* regmap_cache_only_write_file()
* regmap_cache_bypass_write_file()
Both of the above functions have the pattern:
1. Lock the regmap.
2. Call:
debugfs_write_file_bool()
copy_from_user()
__might_fault()
__might_sleep()
Let's reorder things a bit so that we do all of our sleepable
functions before we grab the lock.
Fixes: d3dc5430d6 ("regmap: debugfs: Allow writes to cache state settings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
CONFIG_REGMAP is not selected when no other serial bus is supported.
It's largely academic since CONFIG_I2C is usually selected e.g. by
DRM, but still this can break randconfig so let's be explicit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200707202628.113142-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the argument to the newer fwnode_handle instead a device tree
node. Fortunately, there are no users for now. So this is an easy
change.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200706175353.16404-2-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.
The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.
Fix this by using strcmp() instead.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
A few small fixes, none of which are likely to have any substantial
impact here - the most substantial one is a fix for a long standing
memory leak on devices that use register patching which will only have
an impact if the device is removed and re-added.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7wllsTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0L5pB/sEQIAR3U1OY7Wh/fln5BvAVkjazr60
PGclUzIWSOuNdMQBClibQhIJkTwLA3BjW1o0db3qB7ulZArGT5KqNdY0z0BkUkPz
6/l297XHerHkNmQc16F9NqT6RX8Xori/mke0DuHkurxq+A1iS970Q3a9todz0ZWB
UuMVfE6a3i13QxhahQmp86NNUH3BbWgyDRUuJELdHGyM7Ydit7Tt1kYLua1TTdBQ
t7R00ukv0XSLG4vCIfSjFajVlzQZIM1YEzefY9TUAWaOc/2znj0syUGn1FehdV5J
a01BWk91jNecHq6K8sIKV7N4z4OUKQqkwlyj+KkB0iMf11xezkJnWCZC
=yvq/
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A few small fixes, none of which are likely to have any substantial
impact here - the most substantial one is a fix for a long standing
memory leak on devices that use register patching which will only have
an impact if the device is removed and re-added"
* tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix memory leak from regmap_register_patch
regmap: fix the kerneldoc for regmap_test_bits()
regmap: fix alignment issue
When a register patch is registered the reg_sequence is copied but the
memory allocated is never freed. Add a kfree in regmap_exit to clean it
up.
Fixes: 22f0d90a34 ("regmap: Support register patch sets")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two spaces between arguments in regmap_fields_update_bits_base()
so remove one.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200615072507.11303-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
The kerneldoc comment for regmap_test_bits() says that it returns -1 on
regmap_read() failure. This is not true - it will propagate the error
code returned by regmap_read(). Fix it.
Fixes: aa2ff9dbae ("regmap: provide helpers for simple bit operations")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200607093421.22209-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
The assembly and disassembly of data to be sent to or received from
a device invoke functions regmap_format_XX() and regmap_parse_XX()
that extract or insert data items from or into a buffer, using
assignments. In some cases the functions are called with a buffer
pointer with an odd address. On architectures with strict alignment
requirements this can result in a kernel crash. The assignments
have been replaced by functions that take alignment into account.
Signed-off-by: Jens Thoms Toerring <jt@toerring.de>
Link: https://lore.kernel.org/r/20200531095300.GA27570@toerring.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Bartosz Golaszewski <bgolaszewski@baylibre.com>:
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
I noticed that oftentimes I use regmap_update_bits() for simple bit
setting or clearing. In this case the fourth argument is superfluous as
it's always 0 or equal to the mask argument.
This series proposes to add simple bit operations for setting, clearing
and testing specific bits with regmap.
The second patch uses all three in a driver that got recently picked into
the net-next tree.
The patches obviously target different trees so - if you're ok with
the change itself - I propose you pick the first one into your regmap
tree for v5.8 and then I'll resend the second patch to add the first
user for these macros for v5.9.
v1 -> v2:
- convert the new macros to static inline functions
v2 -> v3:
- drop unneeded ternary operator
Bartosz Golaszewski (2):
regmap: provide helpers for simple bit operations
net: ethernet: mtk-star-emac: use regmap bitops
drivers/base/regmap/regmap.c | 22 +++++
drivers/net/ethernet/mediatek/mtk_star_emac.c | 80 ++++++++-----------
include/linux/regmap.h | 36 +++++++++
3 files changed, 93 insertions(+), 45 deletions(-)
base-commit: 8f3d9f3542
--
2.26.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
In many instances regmap_update_bits() is used for simple bit setting
and clearing. In these cases the last argument is redundant and we can
hide it with a static inline function.
This adds three new helpers for simple bit operations: set_bits,
clear_bits and test_bits (the last one defined as a regular function).
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200528154503.26304-2-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows to access data with 16-bit width of registers
via i2c SMBus block functions.
The multi-command sequence of the reading function is not safe
and may read the wrong data from other address if other commands
are sent in-between the SMBus commands in the read function.
Read performance:
32768 bytes (33 kB, 32 KiB) copied, 11.4869 s, 2.9 kB/s
Write performance(with 1-byte page):
32768 bytes (33 kB, 32 KiB) copied, 129.591 s, 0.3 kB/s
The implementation is inspired by below commit
https://patchwork.ozlabs.org/patch/545292/
v2: add more descriptions about the issue that maybe introduced
by this commit
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20200424123358.144850-1-acelan.kao@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Kontron sl28cpld is a board management chip providing gpio, pwm, fan
monitoring and an interrupt controller. For now this controller is used on
the Kontron SMARC-sAL28 board. But because of its flexible nature, it
might also be used on other boards in the future. The individual blocks
(like gpio, pwm, etc) are kept intentionally small. The MFD core driver
then instantiates different (or multiple of the same) blocks. It also
provides the register layout so it might be updated in the future without a
device tree change; and support other boards with a different layout or
functionalities.
See also [1] for more information.
This is my first take of a MFD driver. I don't know whether the subsystem
maintainers should only be CCed on the patches which affect the subsystem
or on all patches for this series. I've chosen the latter so you can get a
more complete picture.
[1] https://lore.kernel.org/linux-devicetree/0e3e8204ab992d75aa07fc36af7e4ab2@walle.cc/
Changes since v1:
- use of_match_table in all drivers, needed for automatic module loading,
when using OF_MFD_CELL()
- add new gpio-regmap.c which adds a generic regmap gpio_chip implemention
- new patch for reqmap_irq, so we can reuse its implementation
- remove almost any code from gpio-sl28cpld.c, instead use gpio-regmap and
regmap-irq
- change the handling of the mfd core vs device tree nodes; add a new
property "of_reg" to the mfd_cell struct which, when set, is matched to
the unit-address of the device tree nodes.
- fix sl28cpld watchdog when it is not initialized by the bootloader.
Explicitly set the operation mode.
- also add support for kontron,assert-wdt-timeout-pin in sl28cpld-wdt.
As suggested by Bartosz Golaszewski:
- define registers as hex
- make gpio enum uppercase
- move parent regmap check before memory allocation
- use device_property_read_bool() instead of the of_ version
- mention the gpio flavors in the bindings documentation
As suggested by Guenter Roeck:
- cleanup #includes and sort them
- use devm_watchdog_register_device()
- use watchdog_stop_on_reboot()
- provide a Documentation/hwmon/sl28cpld.rst
- cleaned up the weird tristate->bool and I2C=y issue. Instead mention
that the MFD driver is bool because of the following intc patch
- removed the SL28CPLD_IRQ typo
As suggested by Rob Herring:
- combine all dt bindings docs into one patch
- change the node name for all gpio flavors to "gpio"
- removed the interrupts-extended rule
- cleaned up the unit-address space, see above
Michael Walle (16):
include/linux/ioport.h: add helper to define REG resource constructs
mfd: mfd-core: Don't overwrite the dma_mask of the child device
mfd: mfd-core: match device tree node against reg property
regmap-irq: make it possible to add irq_chip do a specific device node
dt-bindings: mfd: Add bindings for sl28cpld
mfd: Add support for Kontron sl28cpld management controller
irqchip: add sl28cpld interrupt controller support
watchdog: add support for sl28cpld watchdog
pwm: add support for sl28cpld PWM controller
gpio: add a reusable generic gpio_chip using regmap
gpio: add support for the sl28cpld GPIO controller
hwmon: add support for the sl28cpld hardware monitoring controller
arm64: dts: freescale: sl28: enable sl28cpld
arm64: dts: freescale: sl28: map GPIOs to input events
arm64: dts: freescale: sl28: enable LED support
arm64: dts: freescale: sl28: enable fan support
.../bindings/gpio/kontron,sl28cpld-gpio.yaml | 51 +++
.../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++
.../bindings/mfd/kontron,sl28cpld.yaml | 162 +++++++++
.../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++
.../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++
Documentation/hwmon/sl28cpld.rst | 36 ++
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 14 +
.../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +
.../freescale/fsl-ls1028a-kontron-sl28.dts | 124 +++++++
drivers/base/regmap/regmap-irq.c | 84 ++++-
drivers/gpio/Kconfig | 15 +
drivers/gpio/Makefile | 2 +
drivers/gpio/gpio-regmap.c | 321 ++++++++++++++++++
drivers/gpio/gpio-sl28cpld.c | 187 ++++++++++
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/sl28cpld-hwmon.c | 152 +++++++++
drivers/irqchip/Kconfig | 3 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-sl28cpld.c | 99 ++++++
drivers/mfd/Kconfig | 21 ++
drivers/mfd/Makefile | 2 +
drivers/mfd/mfd-core.c | 31 +-
drivers/mfd/sl28cpld.c | 154 +++++++++
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-sl28cpld.c | 204 +++++++++++
drivers/watchdog/Kconfig | 11 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/sl28cpld_wdt.c | 242 +++++++++++++
include/linux/gpio-regmap.h | 88 +++++
include/linux/ioport.h | 5 +
include/linux/mfd/core.h | 26 +-
include/linux/regmap.h | 10 +
34 files changed, 2142 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
create mode 100644 Documentation/hwmon/sl28cpld.rst
create mode 100644 drivers/gpio/gpio-regmap.c
create mode 100644 drivers/gpio/gpio-sl28cpld.c
create mode 100644 drivers/hwmon/sl28cpld-hwmon.c
create mode 100644 drivers/irqchip/irq-sl28cpld.c
create mode 100644 drivers/mfd/sl28cpld.c
create mode 100644 drivers/pwm/pwm-sl28cpld.c
create mode 100644 drivers/watchdog/sl28cpld_wdt.c
create mode 100644 include/linux/gpio-regmap.h
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Add a new function regmap_add_irq_chip_np() with its corresponding
devm_regmap_add_irq_chip_np() variant. Sometimes one want to register
the IRQ domain on a different device node that the one of the regmap
node. For example when using a MFD where there are different interrupt
controllers and particularly for the generic regmap gpio_chip/irq_chip
driver. In this case it is not desireable to have the IRQ domain on
the parent node.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200402203656.27047-5-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
When executing the following command, we met kernel dump.
dmesg -c > /dev/null; cd /sys;
for i in `ls /sys/kernel/debug/regmap/* -d`; do
echo "Checking regmap in $i";
cat $i/registers;
done && grep -ri "0x02d0" *;
It is because the count value is too big, and kmalloc fails. So add an
upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When checking if a register block is writable we must ensure that the
block does not start with or contain a non incrementing register.
Fixes: 8b9f9d4dc5 ("regmap: verify if register is writeable before writing operations")
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Link: https://lore.kernel.org/r/20200118205625.14532-1-ben.whitten@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only two changes for this release, one fix for error handling with
runtime PM and a change from Greg removing error handling from debugfs
API calls now that they implement user visible error reporting.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl1+vGATHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JMJB/9Nx/DQ8mGc4KTiNjOd2ic0nwPfsYNB
Nr7/5GXmvjPc64tLmDDITZZTNbruMxMfcvJqli+JVre/yVbM8DrGMuPKpV7KJQl1
ZKXCeRfXRtsZ/u3e/Kek0GEDRGgSwp1qTR3e4SoEQYyrf8oWIrVfRn53ptF+xJld
inQh81+uoLHjWLZ+B2JQ/Dx7729z1+cmM3xpttvakDDRBJ7d9kIs2XA6mNfcWx4/
JibNoOdRt+xxU2ALaa2yNEomv/AuFbQARYop2w6ivxefQAYpVAdqwnYJJdAHIZXi
vkBczdLQpLeGXLaDrR6v0nvKvNBKaUH2WU2osFHI8ww9+HWEVr834Xor
=UQDg
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Only two changes for this release, one fix for error handling with
runtime PM and a change from Greg removing error handling from debugfs
API calls now that they implement user visible error reporting"
* tag 'regmap-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Correct error paths in regmap_irq_thread for pm_runtime
regmap: no need to check return value of debugfs_create functions
Some error paths in regmap_irq_thread put the pm_runtime others do not,
there is no reason to leave the pm_runtime enabled in some cases so
update those paths to also put the pm_runtime.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190812092409.21593-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code has a mixed select/depend usage which makes no sense.
config SOUNDWIRE_BUS
tristate
select REGMAP_SOUNDWIRE
config REGMAP_SOUNDWIRE
tristate
depends on SOUNDWIRE_BUS
Let's remove one layer of Kconfig definitions and align with the
solutions used by all other serial links.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190718230215.18675-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
The debugfs core will warn if a file or directory can not be created, so
there's no need to duplicate the warning, nor really do anything else.
Cc: Mark Brown <broonie@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190731132923.GA13829@kroah.com
Signed-off-by: Mark Brown <broonie@kernel.org>
REGMAP_SCCB is selected by ov772x and ov9650 drivers,
but CONFIG_REGMAP may not, so building will fails:
rivers/media/i2c/ov772x.c: In function ov772x_probe:
drivers/media/i2c/ov772x.c:1360:22: error: variable ov772x_regmap_config has initializer but incomplete type
static const struct regmap_config ov772x_regmap_config = {
^~~~~~~~~~~~~
drivers/media/i2c/ov772x.c:1361:4: error: const struct regmap_config has no member named reg_bits
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5bbf32217b ("media: ov772x: use SCCB regmap")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190704093553.49904-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On buses like SlimBus and SoundWire which does not support
gather_writes yet in regmap, A bulk write on paged register
would be silently ignored after programming page.
This is because local variable 'ret' value in regmap_raw_write_impl()
gets reset to 0 once page register is written successfully and the
code below checks for 'ret' value to be -ENOTSUPP before linearising
the write buffer to send to bus->write().
Fix this by resetting the 'ret' value to -ENOTSUPP in cases where
gather_writes() is not supported or single register write is
not possible.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add basic support for i3c bus.
This is a simple implementation that only give support
for SDR Read and Write commands.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There were a few files in the regmap code that did not have SPDX
identifiers on them, so fix that up. At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.
Also, as Mark loves // comment markers, convert all of the headers to be
the same to make things look consistent :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap provides a couple of ways to validate the register range used.
a) maxim allowed register, b) writable/readable register tables,
c) callback function that can be provided by the driver to validate
a register. regmap framework should verify if registers
are writeable before every write operation. However this doesn't
seems to happen in every situation.
The method `_regmap_raw_write_impl` is only using the `writeable_reg`
callback to verify if register is writeable, ignoring the other two.
This can lead to undefined behaviour since this allows to write to
registers that could be declared un-writeable by using any other
option.
Change `_regmap_raw_write_impl` to use the `regmap_writeable` method
to verify if registers are writable before the write operation.
Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Checking for value of type default value just after allocating will
always be zero and the type register default values will never be read,
so fix this!
Without this patch setting irq type will be silently ignored.
Patch "regmap: regmap-irq: Remove default irq type setting from core"
did remove the default mask but it forgot to remove the check before
reading the default type register.
Fixes: 84267d1b18 ("regmap: regmap-irq: Remove default irq type setting from core")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve the speed of the loop jumping to the next
available register
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
