Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull TPM updates from James Morris:
- Support for partial reads of /dev/tpm0.
- Clean up for TPM 1.x code: move the commands to tpm1-cmd.c and make
everything to use the same data structure for building TPM commands
i.e. struct tpm_buf.
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (25 commits)
tpm: add support for partial reads
tpm: tpm_ibmvtpm: fix kdoc warnings
tpm: fix kdoc for tpm2_flush_context_cmd()
tpm: tpm_try_transmit() refactor error flow.
tpm: use u32 instead of int for PCR index
tpm1: reimplement tpm1_continue_selftest() using tpm_buf
tpm1: reimplement SAVESTATE using tpm_buf
tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read()
tpm1: implement tpm1_pcr_read_dev() using tpm_buf structure
tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure
tpm: tpm-space.c remove unneeded semicolon
tpm: tpm-interface.c drop unused macros
tpm: add tpm_auto_startup() into tpm-interface.c
tpm: factor out tpm_startup function
tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c
tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.c
tpm: factor out tpm1_get_random into tpm1-cmd.c
tpm: move tpm_getcap to tpm1-cmd.c
tpm: move tpm1_pcr_extend to tpm1-cmd.c
tpm: factor out tpm_get_timeouts()
...
Pull smack updates from James Morris:
"Two Smack patches for 4.21.
Jose's patch adds missing documentation and Zoran's fleshes out the
access checks on keyrings"
* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Smack: Improve Documentation
smack: fix access permissions for keyring
Pull integrity updates from James Morris:
"In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load syscall.
Different signature verification methods exist for verifying the
kexec'ed kernel image. This adds additional support in IMA to prevent
loading unsigned kernel images via the kexec_load syscall,
independently of the IMA policy rules, based on the runtime "secure
boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
integrity: Remove references to module keyring
ima: Use inode_is_open_for_write
ima: Support platform keyring for kernel appraisal
efi: Allow the "db" UEFI variable to be suppressed
efi: Import certificates from UEFI Secure Boot
efi: Add an EFI signature blob parser
efi: Add EFI signature data types
integrity: Load certs to the platform keyring
integrity: Define a trusted platform keyring
selftests/ima: kexec_load syscall test
ima: don't measure/appraise files on efivarfs
x86/ima: retry detecting secure boot mode
docs: Extend trusted keys documentation for TPM 2.0
x86/ima: define arch_get_ima_policy() for x86
ima: add support for arch specific policies
ima: refactor ima_init_policy()
ima: prevent kexec_load syscall based on runtime secureboot flag
x86/ima: define arch_ima_get_secureboot
integrity: support new struct public_key_signature encoding field
We need to check the return value of match_token() for Opt_err before
doing anything with it.
[ Not only did the old "-1" value for Opt_err cause problems for the
__test_and_set_bit(), as fixed in commit 94c13f66e1 ("security:
don't use a negative Opt_err token index"), but accessing
"args[0].from" is invalid for the Opt_err case, as pointed out by Eric
later. - Linus ]
Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com
Fixes: 00d60fd3b9 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@kernel.org # 4.20
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3Fl
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
* tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
kconfig: add static qualifiers to fix gconf warnings
kconfig: split the lexer out of zconf.y
kconfig: split some C files out of zconf.y
kconfig: convert to SPDX License Identifier
kconfig: remove keyword lookup table entirely
kconfig: update current_pos in the second lexer
kconfig: switch to ASSIGN_VAL state in the second lexer
kconfig: stop associating kconf_id with yylval
kconfig: refactor end token rules
kconfig: stop supporting '.' and '/' in unquoted words
treewide: surround Kconfig file paths with double quotes
microblaze: surround string default in Kconfig with double quotes
kconfig: use T_WORD instead of T_VARIABLE for variables
kconfig: use specific tokens instead of T_ASSIGN for assignments
kconfig: refactor scanning and parsing "option" properties
kconfig: use distinct tokens for type and default properties
kconfig: remove redundant token defines
kconfig: rename depends_list to comment_option_list
...
Merge misc updates from Andrew Morton:
- large KASAN update to use arm's "software tag-based mode"
- a few misc things
- sh updates
- ocfs2 updates
- just about all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
memcg, oom: notify on oom killer invocation from the charge path
mm, swap: fix swapoff with KSM pages
include/linux/gfp.h: fix typo
mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
memory_hotplug: add missing newlines to debugging output
mm: remove __hugepage_set_anon_rmap()
include/linux/vmstat.h: remove unused page state adjustment macro
mm/page_alloc.c: allow error injection
mm: migrate: drop unused argument of migrate_page_move_mapping()
blkdev: avoid migration stalls for blkdev pages
mm: migrate: provide buffer_migrate_page_norefs()
mm: migrate: move migrate_page_lock_buffers()
mm: migrate: lock buffers before migrate_page_move_mapping()
mm: migration: factor out code to compute expected number of page references
mm, page_alloc: enable pcpu_drain with zone capability
kmemleak: add config to select auto scan
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
...
* Add support for the security features of nvdimm devices that
implement a security model similar to ATA hard drive security. The
security model supports locking access to the media at
device-power-loss, to be unlocked with a passphrase, and secure-erase
(crypto-scramble).
Unlike the ATA security case where the kernel expects device
security to be managed in a pre-OS environment, the libnvdimm security
implementation allows key provisioning and key-operations at OS
runtime. Keys are managed with the kernel's encrypted-keys facility to
provide data-at-rest security for the libnvdimm key material. The
usage model mirrors fscrypt key management, but is driven via
libnvdimm sysfs.
* Miscellaneous updates for api usage and comment fixes.
-----BEGIN PGP SIGNATURE-----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=7KYd
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The vast bulk of this update is the new support for the security
capabilities of some nvdimms.
The userspace tooling for this capability is still a work in progress,
but the changes survive the existing libnvdimm unit tests. The changes
also pass manual checkout on hardware and the new nfit_test emulation
of the security capability.
The touches of the security/keys/ files have received the necessary
acks from Mimi and David. Those changes were necessary to allow for a
new generic encrypted-key type, and allow the nvdimm sub-system to
lookup key material referenced by the libnvdimm-sysfs interface.
Summary:
- Add support for the security features of nvdimm devices that
implement a security model similar to ATA hard drive security. The
security model supports locking access to the media at
device-power-loss, to be unlocked with a passphrase, and
secure-erase (crypto-scramble).
Unlike the ATA security case where the kernel expects device
security to be managed in a pre-OS environment, the libnvdimm
security implementation allows key provisioning and key-operations
at OS runtime. Keys are managed with the kernel's encrypted-keys
facility to provide data-at-rest security for the libnvdimm key
material. The usage model mirrors fscrypt key management, but is
driven via libnvdimm sysfs.
- Miscellaneous updates for api usage and comment fixes"
* tag 'libnvdimm-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
libnvdimm/security: Quiet security operations
libnvdimm/security: Add documentation for nvdimm security support
tools/testing/nvdimm: add Intel DSM 1.8 support for nfit_test
tools/testing/nvdimm: Add overwrite support for nfit_test
tools/testing/nvdimm: Add test support for Intel nvdimm security DSMs
acpi/nfit, libnvdimm/security: add Intel DSM 1.8 master passphrase support
acpi/nfit, libnvdimm/security: Add security DSM overwrite support
acpi/nfit, libnvdimm: Add support for issue secure erase DSM to Intel nvdimm
acpi/nfit, libnvdimm: Add enable/update passphrase support for Intel nvdimms
acpi/nfit, libnvdimm: Add disable passphrase support to Intel nvdimm.
acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs
acpi/nfit, libnvdimm: Add freeze security support to Intel nvdimm
acpi/nfit, libnvdimm: Introduce nvdimm_security_ops
keys-encrypted: add nvdimm key format type to encrypted keys
keys: Export lookup_user_key to external users
acpi/nfit, libnvdimm: Store dimm id as a member to struct nvdimm
libnvdimm, namespace: Replace kmemdup() with kstrndup()
libnvdimm, label: Switch to bitmap_zalloc()
ACPI/nfit: Adjust annotation for why return 0 if fail to find NFIT at start
libnvdimm, bus: Check id immediately following ida_simple_get
...
totalram_pages and totalhigh_pages are made static inline function.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto updates from Herbert Xu:
"API:
- Add 1472-byte test to tcrypt for IPsec
- Reintroduced crypto stats interface with numerous changes
- Support incremental algorithm dumps
Algorithms:
- Add xchacha12/20
- Add nhpoly1305
- Add adiantum
- Add streebog hash
- Mark cts(cbc(aes)) as FIPS allowed
Drivers:
- Improve performance of arm64/chacha20
- Improve performance of x86/chacha20
- Add NEON-accelerated nhpoly1305
- Add SSE2 accelerated nhpoly1305
- Add AVX2 accelerated nhpoly1305
- Add support for 192/256-bit keys in gcmaes AVX
- Add SG support in gcmaes AVX
- ESN for inline IPsec tx in chcr
- Add support for CryptoCell 703 in ccree
- Add support for CryptoCell 713 in ccree
- Add SM4 support in ccree
- Add SM3 support in ccree
- Add support for chacha20 in caam/qi2
- Add support for chacha20 + poly1305 in caam/jr
- Add support for chacha20 + poly1305 in caam/qi2
- Add AEAD cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits)
crypto: skcipher - remove remnants of internal IV generators
crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS
crypto: salsa20-generic - don't unnecessarily use atomic walk
crypto: skcipher - add might_sleep() to skcipher_walk_virt()
crypto: x86/chacha - avoid sleeping under kernel_fpu_begin()
crypto: cavium/nitrox - Added AEAD cipher support
crypto: mxc-scc - fix build warnings on ARM64
crypto: api - document missing stats member
crypto: user - remove unused dump functions
crypto: chelsio - Fix wrong error counter increments
crypto: chelsio - Reset counters on cxgb4 Detach
crypto: chelsio - Handle PCI shutdown event
crypto: chelsio - cleanup:send addr as value in function argument
crypto: chelsio - Use same value for both channel in single WR
crypto: chelsio - Swap location of AAD and IV sent in WR
crypto: chelsio - remove set but not used variable 'kctx_len'
crypto: ux500 - Use proper enum in hash_set_dma_transfer
crypto: ux500 - Use proper enum in cryp_set_dma_transfer
crypto: aesni - Add scatter/gather avx stubs, and use them in C
crypto: aesni - Introduce partial block macro
..
Pull networking updates from David Miller:
1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.
2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.
3) Implement GRO for plain UDP sockets, from Paolo Abeni.
4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.
5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.
6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...
7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.
8) Various TSO deferral refinements, from Eric Dumazet.
9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.
10) Batch dropping of XDP packets in tuntap, from Jason Wang.
11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.
12) Lots of new forwarding selftests from Petr Machata.
13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.
14) Packed ring support for virtio, from Tiwei Bie.
15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.
16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.
17) Implement coalescing on TCP backlog queue, from Eric Dumazet.
18) Implement carrier change in tun driver, from Nicolas Dichtel.
19) Support msg_zerocopy in UDP, from Willem de Bruijn.
20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.
21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.
22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.
23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.
24) Add support for netlink FDB get operations, from Roopa Prabhu.
25) Support bloom filter in mlxsw driver, from Nir Dotan.
26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.
27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...
Pull general security subsystem updates from James Morris:
"The main changes here are Paul Gortmaker's removal of unneccesary
module.h infrastructure"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: integrity: partial revert of make ima_main explicitly non-modular
security: fs: make inode explicitly non-modular
security: audit and remove any unnecessary uses of module.h
security: integrity: make evm_main explicitly non-modular
keys: remove needless modular infrastructure from ecryptfs_format
security: integrity: make ima_main explicitly non-modular
tomoyo: fix small typo
-----BEGIN PGP SIGNATURE-----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=uWQk
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux patches from Paul Moore:
"I already used my best holiday pull request lines in the audit pull
request, so this one is going to be a bit more boring, sorry about
that. To make up for this, we do have a birthday of sorts to
celebrate: SELinux turns 18 years old this December. Perhaps not the
most exciting thing in the world for most people, but I think it's
safe to say that anyone reading this email doesn't exactly fall into
the "most people" category.
Back to business and the pull request itself:
Ondrej has five patches in this pull request and I lump them into
three categories: one patch to always allow submounts (using similar
logic to elsewhere in the kernel), one to fix some issues with the
SELinux policydb, and the others to cleanup and improve the SELinux
sidtab.
The other patches from Alexey and Petr and trivial fixes that are
adequately described in their respective subject lines.
With this last pull request of the year, I want to thank everyone who
has contributed patches, testing, and reviews to the SELinux project
this year, and the past 18 years. Like any good open source effort,
SELinux is only as good as the community which supports it, and I'm
very happy that we have the community we do - thank you all!"
* tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: overhaul sidtab to fix bug and improve performance
selinux: use separate table for initial SID lookup
selinux: make "selinux_policycap_names[]" const char *
selinux: always allow mounting submounts
selinux: refactor sidtab conversion
Documentation: Update SELinux reference policy URL
selinux: policydb - fix byte order and alignment issues
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlwhAwIUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNl1w/+PKsewN5VkmmfibIxZ+iZwe1KGB+L
iOwkdHDkG1Bae5A7TBdbKMbHq0FdhaiDXAIFrfunBG/tbgBF9O0056edekR4rRLp
ReGQVNpGMggiATyVKrc3vi+4+UYQqtS6N7Y8q+mMMX/hVeeESXrTAZdgxSWwsZAX
LbYwXXYUyupLvelpkpakE6VPZEcatcYWrVK/vFKLkTt2jLLlLPtanbMf0B71TULi
5EZSVBYWS71a6yvrrYcVDDZjgot31nVQfX4EIqE6CVcXLuL9vqbZBGKZh+iAGbjs
UdKgaQMZ/eJ4CRYDJca0Bnba3n1AKO4uNssY0nrMW4s/inDPrJnMZ0kgGWfayE3d
QR96aHEP5W3SZoiJCUlYm8a4JFfndYKn4YBvqjvLgIkbd784/rvI+sNGM9BF1DNP
f05frIJVHLNO3sECKWMmQyMGWGglj7bLsjtKrai5UQReyFLpM/q/Lh3J1IHZ9KZq
YWFTA4G0rg7x2bdEB4Qh/SaLOOHW7uyQ7IJCYfzSKsZCIO++RqCQoArxiKRE6++C
hv0UG6NGb6Z6a+k1JSzlxCXPmcui0zow7aqEpZSl/9kiYzkLpBITha/ERP7at5M2
W3JVNfQNn6kPtZFgmNuP7rNE9Yn6jnbIdks0nsi/J/4KUr/p2Mfc5LamyTj1unk6
xf7S+xmOFKHAc2s=
=PCHx
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"In the finest of holiday of traditions, I have a number of gifts to
share today. While most of them are re-gifts from others, unlike the
typical re-gift, these are things you will want in and around your
tree; I promise.
This pull request is perhaps a bit larger than our typical PR, but
most of it comes from Jan's rework of audit's fanotify code; a very
welcome improvement. We ran this through our normal regression tests,
as well as some newly created stress tests and everything looks good.
Richard added a few patches, mostly cleaning up a few things and and
shortening some of the audit records that we send to userspace; a
change the userspace folks are quite happy about.
Finally YueHaibing and I kick in a few patches to simplify things a
bit and make the code less prone to errors.
Lastly, I want to say thanks one more time to everyone who has
contributed patches, testing, and code reviews for the audit subsystem
over the past year. The project is what it is due to your help and
contributions - thank you"
* tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (22 commits)
audit: remove duplicated include from audit.c
audit: shorten PATH cap values when zero
audit: use current whenever possible
audit: minimize our use of audit_log_format()
audit: remove WATCH and TREE config options
audit: use session_info helper
audit: localize audit_log_session_info prototype
audit: Use 'mark' name for fsnotify_mark variables
audit: Replace chunk attached to mark instead of replacing mark
audit: Simplify locking around untag_chunk()
audit: Drop all unused chunk nodes during deletion
audit: Guarantee forward progress of chunk untagging
audit: Allocate fsnotify mark independently of chunk
audit: Provide helper for dropping mark's chunk reference
audit: Remove pointless check in insert_hash()
audit: Factor out chunk replacement code
audit: Make hash table insertion safe against concurrent lookups
audit: Embed key into chunk
audit: Fix possible tagging failures
audit: Fix possible spurious -ENOSPC error
...
The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.
I do not see a good reason to complicate Kconfig for the room of
ambiguity.
The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.
Make it treewide consistent now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 4f83d5ea64 ("security: integrity: make ima_main explicitly
non-modular") I'd removed <linux/module.h> after assuming that the
function is_module_sig_enforced() was an LSM function and not a core
kernel module function.
Unfortunately the typical .config selections used in build testing
provide an implicit <linux/module.h> presence, and so normal/typical
build testing did not immediately reveal my incorrect assumption.
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type
same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Start the policy_tokens and the associated enumeration from zero,
simplifying the pt macro.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code uses a bitmap to check for duplicate tokens during parsing, and
that doesn't work at all for the negative Opt_err token case.
There is absolutely no reason to make Opt_err be negative, and in fact
it only confuses things, since some of the affected functions actually
return a positive Opt_xyz enum _or_ a regular negative error code (eg
-EINVAL), and using -1 for Opt_err makes no sense.
There are similar problems in ima_policy.c and key encryption, but they
don't have the immediate bug wrt bitmap handing, and ima_policy.c in
particular needs a different patch to make the enum values match the
token array index. Mimi is sending that separately.
Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 5208cc8342 ("keys, trusted: fix: *do not* allow duplicate key options")
Fixes: 00d60fd3b9 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: James Morris James Morris <jmorris@namei.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
From what I can tell, it has never been used.
Mimi: This was introduced prior to Rusty's decision to use appended
signatures for kernel modules.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=jM+s
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-20181217' of git://git.infradead.org/users/jjs/linux-tpmdd into next-tpm
tpmdd updates for Linux v4.21
From Jarkko:
v4.21 updates:
* Support for partial reads of /dev/tpm0.
* Clean up for TPM 1.x code: move the commands to tpm1-cmd.c and make
everything to use the same data structure for building TPM commands
i.e. struct tpm_buf.
From Mimi:
In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load
syscall. Different signature verification methods exist for verifying
the kexec'ed kernel image. This pull request adds additional support
in IMA to prevent loading unsigned kernel images via the kexec_load
syscall, independently of the IMA policy rules, based on the runtime
"secure boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here.)
Adding nvdimm key format type to encrypted keys in order to limit the size
of the key to 32bytes.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Export lookup_user_key() symbol in order to allow nvdimm passphrase
update to retrieve user injected keys.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use the aptly named function rather than open coding the check. No
functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
On secure boot enabled systems, the bootloader verifies the kernel
image and possibly the initramfs signatures based on a set of keys. A
soft reboot(kexec) of the system, with the same kernel image and
initramfs, requires access to the original keys to verify the
signatures.
This patch allows IMA-appraisal access to those original keys, now
loaded on the platform keyring, needed for verifying the kernel image
and initramfs signatures.
[zohar@linux.ibm.com: only use platform keyring if it's enabled (Thiago)]
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If a user tells shim to not use the certs/hashes in the UEFI db variable
for verification purposes, shim will set a UEFI variable called
MokIgnoreDB. Have the uefi import code look for this and ignore the db
variable if it is found.
[zohar@linux.ibm.com: removed reference to "secondary" keyring comment]
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Secure Boot stores a list of allowed certificates in the 'db' variable.
This patch imports those certificates into the platform keyring. The shim
UEFI bootloader has a similar certificate list stored in the 'MokListRT'
variable. We import those as well.
Secure Boot also maintains a list of disallowed certificates in the 'dbx'
variable. We load those certificates into the system blacklist keyring
and forbid any kernel signed with those from loading.
[zohar@linux.ibm.com: dropped Josh's original patch description]
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Add a function to parse an EFI signature blob looking for elements of
interest. A list is made up of a series of sublists, where all the
elements in a sublist are of the same type, but sublists can be of
different types.
For each sublist encountered, the function pointed to by the
get_handler_for_guid argument is called with the type specifier GUID and
returns either a pointer to a function to handle elements of that type or
NULL if the type is not of interest.
If the sublist is of interest, each element is passed to the handler
function in turn.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The patch refactors integrity_load_x509(), making it a wrapper for a new
function named integrity_add_key(). This patch also defines a new
function named integrity_load_cert() for loading the platform keys.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
On secure boot enabled systems, a verified kernel may need to kexec
additional kernels. For example, it may be used as a bootloader needing
to kexec a target kernel or it may need to kexec a crashdump kernel. In
such cases, it may want to verify the signature of the next kernel
image.
It is further possible that the kernel image is signed with third party
keys which are stored as platform or firmware keys in the 'db' variable.
The kernel, however, can not directly verify these platform keys, and an
administrator may therefore not want to trust them for arbitrary usage.
In order to differentiate platform keys from other keys and provide the
necessary separation of trust, the kernel needs an additional keyring to
store platform keys.
This patch creates the new keyring called ".platform" to isolate keys
provided by platform from keys by kernel. These keys are used to
facilitate signature verification during kexec. Since the scope of this
keyring is only the platform/firmware keys, it cannot be updated from
userspace.
This keyring can be enabled by setting CONFIG_INTEGRITY_PLATFORM_KEYRING.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The Makefile/Kconfig entry controlling compilation of this code is:
security/Makefile:obj-$(CONFIG_SECURITYFS) += inode.o
security/Kconfig:config SECURITYFS
security/Kconfig: bool "Enable the securityfs filesystem"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
The removal of module.h uncovered a couple previously hidden implicit
header requirements which are now included explicitly.
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-security-module@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The Makefile/Kconfig entry controlling compilation of this code is:
obj-$(CONFIG_EVM) += evm.o
evm-y := evm_main.o evm_crypto.o evm_secfs.o
security/integrity/evm/Kconfig:config EVM
security/integrity/evm/Kconfig: bool "EVM support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Even though the support can be modular, only one file needs to use
all the macros like MODULE_AUTHOR, MODULE_LICENSE etc. Only the one
responsible for registering/removal with module_init/module_exit
needs to declare these. In this case, that file is "encrypted.c"
and it already has the MODULE_LICENSE that we are removing here.
Since the file does EXPORT_SYMBOL, we add export.h - and build tests
show that module.h (which includes everything) was hiding an implicit
use of string.h - so that is added as well.
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The Makefile/Kconfig entry controlling compilation of this code is:
obj-$(CONFIG_IMA) += ima.o
ima-y := ima_fs.o ima_queue.o ima_init.o ima_main.o ima_crypto.o ima_api.o \
ima_policy.o ima_template.o ima_template_lib.o
security/integrity/ima/Kconfig:config IMA
security/integrity/ima/Kconfig- bool "Integrity Measurement Architecture(IMA)"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Update the builtin IMA policies specified on the boot command line
(eg. ima_policy="tcb|appraise_tcb") to permit accessing efivar files.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
On x86, there are two methods of verifying a kexec'ed kernel image
signature being loaded via the kexec_file_load syscall - an architecture
specific implementaton or a IMA KEXEC_KERNEL_CHECK appraisal rule. Neither
of these methods verify the kexec'ed kernel image signature being loaded
via the kexec_load syscall.
Secure boot enabled systems require kexec images to be signed. Therefore,
this patch loads an IMA KEXEC_KERNEL_CHECK policy rule on secure boot
enabled systems not configured with CONFIG_KEXEC_VERIFY_SIG enabled.
When IMA_APPRAISE_BOOTPARAM is configured, different IMA appraise modes
(eg. fix, log) can be specified on the boot command line, allowing unsigned
or invalidly signed kernel images to be kexec'ed. This patch permits
enabling IMA_APPRAISE_BOOTPARAM or IMA_ARCH_POLICY, but not both.
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Builtin IMA policies can be enabled on the boot command line, and replaced
with a custom policy, normally during early boot in the initramfs. Build
time IMA policy rules were recently added. These rules are automatically
enabled on boot and persist after loading a custom policy.
There is a need for yet another type of policy, an architecture specific
policy, which is derived at runtime during kernel boot, based on the
runtime secure boot flags. Like the build time policy rules, these rules
persist after loading a custom policy.
This patch adds support for loading an architecture specific IMA policy.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Co-Developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch removes the code duplication in ima_init_policy() by defining
a new function named add_rules(). The new function adds the rules to the
initial IMA policy, the custom policy or both based on the policy mask
(IMA_DEFAULT_POLICY, IMA_CUSTOM_POLICY).
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When CONFIG_KEXEC_VERIFY_SIG is enabled, the kexec_file_load syscall
requires the kexec'd kernel image to be signed. Distros are concerned
about totally disabling the kexec_load syscall. As a compromise, the
kexec_load syscall will only be disabled when CONFIG_KEXEC_VERIFY_SIG
is configured and the system is booted with secureboot enabled.
This patch disables the kexec_load syscall only for systems booted with
secureboot enabled.
[zohar@linux.ibm.com: add missing mesage on kexec_load failure]
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Before this patch, during a policy reload the sidtab would become frozen
and trying to map a new context to SID would be unable to add a new
entry to sidtab and fail with -ENOMEM.
Such failures are usually propagated into userspace, which has no way of
distignuishing them from actual allocation failures and thus doesn't
handle them gracefully. Such situation can be triggered e.g. by the
following reproducer:
while true; do load_policy; echo -n .; sleep 0.1; done &
for (( i = 0; i < 1024; i++ )); do
runcon -l s0:c$i echo -n x || break
# or:
# chcon -l s0:c$i <some_file> || break
done
This patch overhauls the sidtab so it doesn't need to be frozen during
policy reload, thus solving the above problem.
The new SID table leverages the fact that SIDs are allocated
sequentially and are never invalidated and stores them in linear buckets
indexed by a tree structure. This brings several advantages:
1. Fast SID -> context lookup - this lookup can now be done in
logarithmic time complexity (usually in less than 4 array lookups)
and can still be done safely without locking.
2. No need to re-search the whole table on reverse lookup miss - after
acquiring the spinlock only the newly added entries need to be
searched, which means that reverse lookups that end up inserting a
new entry are now about twice as fast.
3. No need to freeze sidtab during policy reload - it is now possible
to handle insertion of new entries even during sidtab conversion.
The tree structure of the new sidtab is able to grow automatically to up
to about 2^31 entries (at which point it should not have more than about
4 tree levels). The old sidtab had a theoretical capacity of almost 2^32
entries, but half of that is still more than enough since by that point
the reverse table lookups would become unusably slow anyway...
The number of entries per tree node is selected automatically so that
each node fits into a single page, which should be the easiest size for
kmalloc() to handle.
Note that the cache for reverse lookup is preserved with equivalent
logic. The only difference is that instead of storing pointers to the
hash table nodes it stores just the indices of the cached entries.
The new cache ensures that the indices are loaded/stored atomically, but
it still has the drawback that concurrent cache updates may mess up the
contents of the cache. Such situation however only reduces its
effectivity, not the correctness of lookups.
Tested by selinux-testsuite and thoroughly tortured by this simple
stress test:
```
function rand_cat() {
echo $(( $RANDOM % 1024 ))
}
function do_work() {
while true; do
echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \
>/sys/fs/selinux/context 2>/dev/null || true
done
}
do_work >/dev/null &
do_work >/dev/null &
do_work >/dev/null &
while load_policy; do echo -n .; sleep 0.1; done
kill %1
kill %2
kill %3
```
Link: https://github.com/SELinuxProject/selinux-kernel/issues/38
Reported-by: Orion Poplawski <orion@nwra.com>
Reported-by: Li Kun <hw.likun@huawei.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: most of sidtab.c merged by hand due to conflicts]
[PM: checkpatch fixes in mls.c, services.c, sidtab.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This moves handling of initial SIDs into a separate table. Note that the
SIDs stored in the main table are now shifted by SECINITSID_NUM and
converted to/from the actual SIDs transparently by helper functions.
This change doesn't make much sense on its own, but it simplifies
further sidtab overhaul in a succeeding patch.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: fixed some checkpatch warnings on line length, whitespace]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Function smack_key_permission() only issues smack requests for the
following operations:
- KEY_NEED_READ (issues MAY_READ)
- KEY_NEED_WRITE (issues MAY_WRITE)
- KEY_NEED_LINK (issues MAY_WRITE)
- KEY_NEED_SETATTR (issues MAY_WRITE)
A blank smack request is issued in all other cases, resulting in
smack access being granted if there is any rule defined between
subject and object, or denied with -EACCES otherwise.
Request MAY_READ access for KEY_NEED_SEARCH and KEY_NEED_VIEW.
Fix the logic in the unlikely case when both MAY_READ and
MAY_WRITE are needed. Validate access permission field for valid
contents.
Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlwAFUUUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXM7ThAAw1j+HSBNM4util2Ji5JZKjjThdVe
ZS1Jji30H51lVl3PNOfIUd9Ep3jLVbQOQ40jFQ2B8LEjjITKQykHtp4p6raYAxbb
yEJGeVikD+UZ0izHMj05uZRBNY5F09s6y1WGMz8EZ6NdSSQezW0CpBCvKN4FpyKQ
LgHmW7oRccSBgs5IcW8bCX/aM1p+HsI8N508T8MbO3qDt4/0OU/6OM+NAE19WvYp
HVrq/BfRgDoQSoz3XxW5bCa7r3GFtxYYtTUjVnqBiRcEk+u67JJ5iJMwiUos1kV3
94iAedGB1cXL0+qgyyb7eaoemSWL2A8FqTwEOL0VoIvaGzW4HJmioIzYgOGd4ni6
BzXHIfdDff3DDWZ+g/T0da6znDLJ+R6u9xETAXcQ+g15FZ0F1ZY+3lJGlQvYfIVY
RGHlWB93NU/Y2vebeqaGDuQOTu8XXJfBBjlHNUi3NQbRZ0ITBduTGpwpyKA6Uuiz
cqrNt7DECTPJzOAJNeZZ7Flhfto1KQvLnPacWzjv9S8Cj1cJn2uS97QPkEqYQVYe
b5D2PprAXpP6hPq3+Roxe+tBL1G+9XjStNrL0xPLgbiQvGCcsoD0R1dEZAesyfLO
ZQGBP+0O/lFyQwn8T3A9QKZRgZFcfVMyOGbQRCUs98XkH0gvbLyfBNzN72aEy0+I
ADbhCoY7pfs1ZZs=
=SyQy
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20181129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fix from Paul Moore:
"One more SELinux fix for v4.20: add some missing netlink message to
SELinux permission mappings. The netlink messages were added in v4.19,
but unfortunately we didn't catch it then because the mechanism to
catch these things was bypassed.
In addition to adding the mappings, we're adding some comments to the
code to hopefully prevent bypasses in the future"
* tag 'selinux-pr-20181129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add support for RTM_NEWCHAIN, RTM_DELCHAIN, and RTM_GETCHAIN
Commit 32a4f5ecd7 ("net: sched: introduce chain object to uapi")
added new RTM_* definitions without properly updating SELinux, this
patch adds the necessary SELinux support.
While there was a BUILD_BUG_ON() in the SELinux code to protect from
exactly this case, it was bypassed in the broken commit. In order to
hopefully prevent this from happening in the future, add additional
comments which provide some instructions on how to resolve the
BUILD_BUG_ON() failures.
Fixes: 32a4f5ecd7 ("net: sched: introduce chain object to uapi")
Cc: <stable@vger.kernel.org> # 4.19
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There are many places, notably audit_log_task_info() and
audit_log_exit(), that take task_struct pointers but in reality they
are always working on the current task. This patch eliminates the
task_struct arguments and uses current directly which allows a number
of cleanups as well.
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
