Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements code-gen for new JMP32 instructions on arm.
For JSET, "ands" (AND with flags updated) is used, so corresponding
encoding helper is added.
Cc: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Improve the 64-bit store implementation from:
ldr r6, [fp, #-8]
str r8, [r6]
ldr r6, [fp, #-8]
mov r7, #4
add r7, r6, r7
str r9, [r7]
to:
ldr r6, [fp, #-8]
str r8, [r6]
str r9, [r6, #4]
We leave the store as two separate STR instructions rather than using
STRD as the store may not be aligned, and STR can handle misalignment.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rather than writing each 32-bit half of the 64-bit immediate value
separately when the register is on the stack:
movw r6, #45056 ; 0xb000
movt r6, #60979 ; 0xee33
str r6, [fp, #-44] ; 0xffffffd4
mov r6, #0
str r6, [fp, #-40] ; 0xffffffd8
arrange to use the double-word store when available instead:
movw r6, #45056 ; 0xb000
movt r6, #60979 ; 0xee33
mov r7, #0
strd r6, [fp, #-44] ; 0xffffffd4
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use double-word load and stores where support for this instruction is
supported by the CPU architecture.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Always use an odd/even register pair for our 64-bit registers, so that
we're able to use the double-word load/store instructions in the future.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rearranging the order of the initial tail call code a little allows is
to avoid reloading the 'array' pointer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Avoid reloading 'index' after we have validated it - it remains in
tmp2[1] up to the point that we begin the code to index the pointer
array, so with a little rearrangement of the registers, we can use
the already loaded value.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rather than pre-shifting the rm register for the ldr in the tail call,
shift it in the load instruction. This eliminates one unnecessary
instruction.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rather than moving constants to a register and then using them in a
subsequent instruction, use them directly in the desired instruction
cutting out the "middle" register. This removes two instructions from
the tail call code path.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Provide a version of the imm8m() function that the compiler can optimise
when used with a constant expression.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Access the eBPF scratch space using the frame pointer rather than our
stack pointer, as the offsets from the ARM frame pointer are constant
across all eBPF programs.
Since we no longer reference the scratch space registers from the stack
pointer, this simplifies emit_push_r64() as it no longer needs to know
how many words are pushed onto the stack.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Provide a couple of 64-bit register accessors, and use them where
appropriate
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Many of the code paths need to have knowledge about whether a register
is stacked or in a CPU register. Move this decision making to a pair
of helper functions instead of having it scattered throughout the
code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The decision about whether a BPF register is on the stack or in a CPU
register is detected at the top BPF insn processing level, and then
percolated throughout the remainder of the code. Since we now use
negative register values to represent stacked registers, we can detect
where a BPF register is stored without restoring to carrying this
additional metadata through all code paths.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use negative numbers for eBPF registers that live on the stack.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Provide a set of load/store opcode generators that work with negative
immediates as well as positive ones.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Enumerate the contents of the JIT scratch stack layout used for storing
some of the JITs 64-bit registers, tail call counter and AX register.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Any eBPF JIT that where its underlying arch supports ARCH_HAS_SET_MEMORY
would need to use bpf_jit_binary_{un,}lock_ro() pair instead of the
set_memory_{ro,rw}() pair directly as otherwise changes to the former
might break. arm32's eBPF conversion missed to change it, so fix this
up here.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The names for BPF_ALU64 | BPF_ARSH are emit_a32_arsh_*,
the names for BPF_ALU64 | BPF_LSH are emit_a32_lsh_*, but
the names for BPF_ALU64 | BPF_RSH are emit_a32_lsr_*.
For consistence reason, let's rename emit_a32_lsr_* to
emit_a32_rsh_*.
This patch also corrects a wrong comment.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: Shubham Bansal <illusionist.neo@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@armlinux.org.uk
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
imm24 is signed, so the right range is:
[-(1<<(24 - 1)), (1<<(24 - 1)) - 1]
Note: this patch also fix a typo.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: Shubham Bansal <illusionist.neo@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@armlinux.org.uk
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The extra skb_copy_bits() buffer is not used anymore, therefore
remove the extra 4 byte stack space requirement.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from arm32 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from arm32 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) bpf array map HW offload, from Jakub.
2) support for bpf_get_next_key() for LPM map, from Yonghong.
3) test_verifier now runs loaded programs, from Alexei.
4) xdp cpumap monitoring, from Jesper.
5) variety of tests, cleanups and small x64 JIT optimization, from Daniel.
6) user space can now retrieve HW JITed program, from Jiong.
Note there is a minor conflict between Russell's arm32 JIT fixes
and removal of bpf_jit_enable variable by Daniel which should
be resolved by keeping Russell's comment and removing that variable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The BPF verifier conflict was some minor contextual issue.
The TUN conflict was less trivial. Cong Wang fixed a memory leak of
tfile->tx_array in 'net'. This is an skb_array. But meanwhile in
net-next tun changed tfile->tx_arry into tfile->tx_ring which is a
ptr_ring.
Signed-off-by: David S. Miller <davem@davemloft.net>
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As per 90caccdd8c ("bpf: fix bpf_tail_call() x64 JIT"), the index used
for array lookup is defined to be 32-bit wide. Update a misleading
comment that suggests it is 64-bit wide.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When the source and destination register are identical, our JIT does not
generate correct code, which leads to kernel oopses.
Fix this by (a) generating more efficient code, and (b) making use of
the temporary earlier if we will overwrite the address register.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When an eBPF program tail-calls another eBPF program, it enters it after
the prologue to avoid having complex stack manipulations. This can lead
to kernel oopses, and similar.
Resolve this by always using a fixed stack layout, a CPU register frame
pointer, and using this when reloading registers before returning.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The stack layout documentation incorrectly suggests that the BPF JIT
scratch space starts immediately below BPF_FP. This is not correct,
so let's fix the documentation to reflect reality.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the stack documentation towards the top of the file, where it's
relevant for things like the register layout.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
As per 2dede2d8e9 ("ARM EABI: stack pointer must be 64-bit aligned
after a CPU exception") the stack should be aligned to a 64-bit boundary
on EABI systems. Ensure that the eBPF JIT appropraitely aligns the
stack.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Avoid the 'bx' instruction on CPUs that have no support for Thumb and
thus do not implement this instruction by moving the generation of this
opcode to a separate function that selects between:
bx reg
and
mov pc, reg
according to the capabilities of the CPU.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
global bpf_jit_enable variable is tested multiple times in JITs,
blinding and verifier core. The malicious root can try to toggle
it while loading the programs. This race condition was accounted
for and there should be no issues, but it's safer to avoid
this race condition.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The JIT compiler emits ARM 32 bit instructions. Currently, It supports
eBPF only. Classic BPF is supported because of the conversion by BPF core.
This patch is essentially changing the current implementation of JIT compiler
of Berkeley Packet Filter from classic to internal with almost all
instructions from eBPF ISA supported except the following
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW
Implementation is using scratch space to emulate 64 bit eBPF ISA on 32 bit
ARM because of deficiency of general purpose registers on ARM. Currently,
only LITTLE ENDIAN machines are supported in this eBPF JIT Compiler.
Tested on ARMv7 with QEMU by me (Shubham Bansal).
Testing results on ARMv7:
1) test_bpf: Summary: 341 PASSED, 0 FAILED, [312/333 JIT'ed]
2) test_tag: OK (40945 tests)
3) test_progs: Summary: 30 PASSED, 0 FAILED
4) test_lpm: OK
5) test_lru_map: OK
Above tests are all done with following flags enabled discreatly.
1) bpf_jit_enable=1
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
2) bpf_jit_enable=1 and bpf_jit_harden=2
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
See Documentation/networking/filter.txt for more information.
Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
set_memory_* functions have moved to set_memory.h. Switch to this
explicitly
Link: http://lkml.kernel.org/r/1488920133-27229-3-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The LSR instruction cannot be used to perform a zero right shift since a
0 as the immediate value (imm5) in the LSR instruction encoding means
that a shift of 32 is perfomed. See DecodeIMMShift() in the ARM ARM.
Make the JIT skip generation of the LSR if a zero-shift is requested.
This was found using american fuzzy lop.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data
instructions since it XORs A with X while all the others replace A with
some loaded value. All the BPF JITs fail to clear A if this is used as
the first instruction in a filter. This was found using american fuzzy
lop.
Add a helper to determine if A needs to be cleared given the first
instruction in a filter, and use this in the JITs. Except for ARM, the
rest have only been compile-tested.
Fixes: 3480593131 ("net: filter: get rid of BPF_S_* enum")
Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During review I noticed that the icache range we're flushing should
start at header already and not at ctx.image.
Reason is that after 55309dd3d4 ("net: bpf: arm: address randomize
and write protect JIT code"), we also want to make sure to flush the
random-sized trap in front of the start of the actual program (analogous
to x86). No operational differences from user side.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nicolas Schichan <nschichan@freebox.fr>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/usb/asix_common.c
net/ipv4/inet_connection_sock.c
net/switchdev/switchdev.c
In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.
The other two conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
For ARMv7 with UDIV instruction support, generate an UDIV instruction
followed by an MLS instruction.
For other ARM variants, generate code calling a C wrapper similar to
the jit_udiv() function used for BPF_ALU | BPF_DIV instructions.
Some performance numbers reported by the test_bpf module (the duration
per filter run is reported in nanoseconds, between "jitted:<x>" and
"PASS":
ARMv7 QEMU nojit: test_bpf: #3 DIV_MOD_KX jited:0 2196 PASS
ARMv7 QEMU jit: test_bpf: #3 DIV_MOD_KX jited:1 104 PASS
ARMv5 QEMU nojit: test_bpf: #3 DIV_MOD_KX jited:0 2176 PASS
ARMv5 QEMU jit: test_bpf: #3 DIV_MOD_KX jited:1 1104 PASS
ARMv5 kirkwood nojit: test_bpf: #3 DIV_MOD_KX jited:0 1103 PASS
ARMv5 kirkwood jit: test_bpf: #3 DIV_MOD_KX jited:1 311 PASS
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this patch, if the only instructions using r_X are of the
BPF_LD | BPF_IND type, r_X would not be reset to 0, using whatever
value was there when entering the jited code. With this patch, r_X
will be correctly marked as used so it will be reset to 0 in the
prologue code.
This fix also makes the test "LD_IND byte default X" pass in the
test_bpf module when the ARM JIT is enabled.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
