Code inspection reveals that PG_skip_kasan_poison is redundant with
kasantag, because the former is intended to be set iff the latter is the
match-all tag. It can also be observed that it's basically pointless to
poison pages which have kasantag=0, because any pages with this tag would
have been pointed to by pointers with match-all tags, so poisoning the
pages would have little to no effect in terms of bug detection.
Therefore, change the condition in should_skip_kasan_poison() to check
kasantag instead, and remove PG_skip_kasan_poison and associated flags.
Link: https://lkml.kernel.org/r/20230310042914.3805818-3-pcc@google.com
Link: https://linux-review.googlesource.com/id/I57f825f2eaeaf7e8389d6cf4597c8a5821359838
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
io_mapping_map_atomic_wc() disables preemption and pagefaults for
historical reasons. The conversion to io_mapping_map_local_wc(), which
only disables migration, cannot be done wholesale because quite some call
sites need to be updated to accommodate with the changed semantics.
On PREEMPT_RT enabled kernels the io_mapping_map_atomic_wc() semantics are
problematic due to the implicit disabling of preemption which makes it
impossible to acquire 'sleeping' spinlocks within the mapped atomic
sections.
PREEMPT_RT replaces the preempt_disable() with a migrate_disable() for
more than a decade. It could be argued that this is a justification to do
this unconditionally, but PREEMPT_RT covers only a limited number of
architectures and it disables some functionality which limits the coverage
further.
Limit the replacement to PREEMPT_RT for now. This is also done
kmap_atomic().
Link: https://lkml.kernel.org/r/20230310162905.O57Pj7hh@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Richard Weinberger <richard.weinberger@gmail.com>
Link: https://lore.kernel.org/CAFLxGvw0WMxaMqYqJ5WgvVSbKHq2D2xcXTOgMCpgq9nDC-MWTQ@mail.gmail.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In doing experimentations with shmem having the option to avoid swap
becomes a useful mechanism. One of the *raves* about brd over shmem is
you can avoid swap, but that's not really a good reason to use brd if we
can instead use shmem. Using brd has its own good reasons to exist, but
just because "tmpfs" doesn't let you do that is not a great reason to
avoid it if we can easily add support for it.
I don't add support for reconfiguring incompatible options, but if we
really wanted to we can add support for that.
To avoid swap we use mapping_set_unevictable() upon inode creation, and
put a WARN_ON_ONCE() stop-gap on writepages() for reclaim.
Link: https://lkml.kernel.org/r/20230309230545.2930737-7-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the docs to reflect a bit better why some folks prefer tmpfs over
ramfs and clarify a bit more about the difference between brd ramdisks.
While at it, add THP docs for tmpfs, both the mount options and the sysfs
file.
Link: https://lkml.kernel.org/r/20230309230545.2930737-6-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In theory when info->flags & VM_LOCKED we should not be getting
shem_writepage() called so we should be verifying this with a
WARN_ON_ONCE(). Since we should not be swapping then best to ensure we
also don't do the folio split earlier too. So just move the check early
to avoid folio splits in case its a dubious call.
We also have a similar early bail when !total_swap_pages so just move that
earlier to avoid the possible folio split in the same situation.
Link: https://lkml.kernel.org/r/20230309230545.2930737-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
i915_gem requires huge folios to be split when swapping. However we have
check for usage of writepages() to ensure it used only for swap purposes
later. Avoid the splits if we're not being called for reclaim, even if
they should in theory not happen.
This makes the conditions easier to follow on shem_writepage().
Link: https://lkml.kernel.org/r/20230309230545.2930737-4-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shmem_writepage() sets up variables typically used *after* a possible huge
page split. However even if that does happen the address space mapping
should not change, and the inode does not change either. So it should be
safe to set that from the very beginning.
This commit makes no functional changes.
Link: https://lkml.kernel.org/r/20230309230545.2930737-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "tmpfs: add the option to disable swap", v2.
I'm doing this work as part of future experimentation with tmpfs and the
page cache, but given a common complaint found about tmpfs is the
innability to work without the page cache I figured this might be useful
to others. It turns out it is -- at least Christian Brauner indicates
systemd uses ramfs for a few use-cases because they don't want to use swap
and so having this option would let them move over to using tmpfs for
those small use cases, see systemd-creds(1).
To see if you hit swap:
mkswap /dev/nvme2n1
swapon /dev/nvme2n1
free -h
With swap - what we see today
=============================
mount -t tmpfs -o size=5G tmpfs /data-tmpfs/
dd if=/dev/urandom of=/data-tmpfs/5g-rand2 bs=1G count=5
free -h
total used free shared buff/cache available
Mem: 3.7Gi 2.6Gi 1.2Gi 2.2Gi 2.2Gi 1.2Gi
Swap: 99Gi 2.8Gi 97Gi
Without swap
=============
free -h
total used free shared buff/cache available
Mem: 3.7Gi 387Mi 3.4Gi 2.1Mi 57Mi 3.3Gi
Swap: 99Gi 0B 99Gi
mount -t tmpfs -o size=5G -o noswap tmpfs /data-tmpfs/
dd if=/dev/urandom of=/data-tmpfs/5g-rand2 bs=1G count=5
free -h
total used free shared buff/cache available
Mem: 3.7Gi 2.6Gi 1.2Gi 2.3Gi 2.3Gi 1.1Gi
Swap: 99Gi 21Mi 99Gi
The mix and match remount testing
=================================
# Cannot disable swap after it was first enabled:
mount -t tmpfs -o size=5G tmpfs /data-tmpfs/
mount -t tmpfs -o remount -o size=5G -o noswap tmpfs /data-tmpfs/
mount: /data-tmpfs: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.
dmesg -c
tmpfs: Cannot disable swap on remount
# Remount with the same noswap option is OK:
mount -t tmpfs -o size=5G -o noswap tmpfs /data-tmpfs/
mount -t tmpfs -o remount -o size=5G -o noswap tmpfs /data-tmpfs/
dmesg -c
# Trying to enable swap with a remount after it first disabled:
mount -t tmpfs -o size=5G -o noswap tmpfs /data-tmpfs/
mount -t tmpfs -o remount -o size=5G tmpfs /data-tmpfs/
mount: /data-tmpfs: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.
dmesg -c
tmpfs: Cannot enable swap on remount if it was disabled on first mount
This patch (of 6):
Matthew notes we should not need to check the folio lock on the
writepage() callback so remove it. This sanity check has been lingering
since linux-history days. We remove this as we tidy up the writepage()
callback to make things a bit clearer.
Link: https://lkml.kernel.org/r/20230309230545.2930737-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20230309230545.2930737-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix missing EXPORT_SYMBOL_GPL() statement for mas_preallocate().
It isn't actually used by anything yet, but mas_preallocate() is part of
the maple tree's 'Advanced API'. All other functions of this API are
exported already.
Link: https://lkml.kernel.org/r/20230302011035.4928-1-dakr@redhat.com
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The last remaining user of folio_write_one through the write_one_page
wrapper is jfs, so move the functionality there and hard code the call to
metapage_writepage.
Note that the use of the pagecache by the JFS 'metapage' buffer cache is a
bit odd, and we could probably do without VM-level dirty tracking at all,
but that's a change for another time.
Link: https://lkml.kernel.org/r/20230307143125.27778-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Gang He <ghe@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jan Kara via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use filemap_write_and_wait_range to write back the range of the dirty page
instead of write_one_page in preparation of removing write_one_page and
eventually ->writepage.
Link: https://lkml.kernel.org/r/20230307143125.27778-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Gang He <ghe@suse.com>
Cc: Jan Kara via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "remove most callers of write_one_page", v4.
This series removes most users of the write_one_page API. These helpers
internally call ->writepage which we are gradually removing from the
kernel.
This patch (of 3):
We do not need to writeout modified directory blocks immediately when
modifying them while the page is locked. It is enough to do the flush
somewhat later which has the added benefit that inode times can be flushed
as well. It also allows us to stop depending on write_one_page()
function.
Ported from an ext2 patch by Jan Kara.
Link: https://lkml.kernel.org/r/20230307143125.27778-1-hch@lst.de
Link: https://lkml.kernel.org/r/20230307143125.27778-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ensure that KMSAN does not report false positives in instrumented callers
of stack_depot_save(), stack_depot_print(), and stack_depot_fetch().
Link: https://lkml.kernel.org/r/20230306111322.205724-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN does not instrument stackdepot and may treat memory allocated by it
as uninitialized. This is not a problem for KMSAN itself, because its
functions calling stackdepot API are also not instrumented. But other
kernel features (e.g. netdev tracker) may access stack depot from
instrumented code, which will lead to false positives, unless we
explicitly mark stackdepot outputs as initialized.
Link: https://lkml.kernel.org/r/20230306111322.205724-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The knob for cgroup v1 memory controller: memory.soft_limit_in_bytes is
not protected by any locking so it can be modified while it is used. This
is not an actual problem because races are unlikely. But it is better to
use [READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->soft_limit is lockless, so it can be concurrently set
at the same time as we are trying to read it. All occurrences of
memcg->soft_limit are updated with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-5-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-5-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The knob for cgroup v1 memory controller: memory.oom_control is not
protected by any locking so it can be modified while it is used. This is
not an actual problem because races are unlikely. But it is better to use
[READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->oom_kill_disable is lockless, so it can be
concurrently set at the same time as we are trying to read it. All
occurrences of memcg->oom_kill_disable are updated with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-4-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.377-4-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The knob for cgroup v1 memory controller: memory.swappiness is not
protected by any locking so it can be modified while it is used. This is
not an actual problem because races are unlikely. But it is better to use
[READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->swappiness and vm_swappiness is lockless, so both of
them can be concurrently set at the same time as we are trying to read
them. All occurrences of memcg->swappiness and vm_swappiness are updated
with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-3-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-3-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, memcg: cgroup v1 and v2 tunable load/store tearing
fixes", v2.
This patch series helps to prevent load/store tearing in
several cgroup knobs.
As kindly pointed out by Michal Hocko and Roman Gushchin
, the changelog has been rephrased.
Besides, more knobs were checked, according to kind suggestions
from Shakeel Butt and Muchun Song.
This patch (of 4):
The knob for cgroup v2 memory controller: memory.oom.group
is not protected by any locking so it can be modified while it is used.
This is not an actual problem because races are unlikely (the knob is
usually configured long before any workloads hits actual memcg oom)
but it is better to use READ_ONCE/WRITE_ONCE to prevent compiler from
doing anything funky.
The access of memcg->oom_group is lockless, so it can be
concurrently set at the same time as we are trying to read it.
Link: https://lkml.kernel.org/r/20230306154138.3775-1-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-2-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix two inputs to check_anon_huge() and one if condition, so the tests
work as expected.
Link: https://lkml.kernel.org/r/20230306160907.16804-1-zi.yan@sent.com
Fixes: c07c343cda ("selftests/vm: dedup THP helpers")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Tested-by: Zach O'Keefe <zokeefe@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
s390 can do more fine-grained handling of spurious TLB protection faults,
when there also is the PTE pointer available.
Therefore, pass on the PTE pointer to flush_tlb_fix_spurious_fault() as an
additional parameter.
This will add no functional change to other architectures, but those with
private flush_tlb_fix_spurious_fault() implementations need to be made
aware of the new parameter.
Link: https://lkml.kernel.org/r/20230306161548.661740-1-gerald.schaefer@linux.ibm.com
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We keep the old fullness (3/4 threshold) reporting in
zs_stats_size_show(). Switch from allmost full/empty stats to
fine-grained per inuse ratio (fullness group) reporting, which gives
signicantly more data on classes fragmentation.
Link: https://lkml.kernel.org/r/20230304034835.2082479-5-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The zsmalloc compaction algorithm has the potential to waste some CPU
cycles, particularly when compacting pages within the same fullness group.
This is due to the way it selects the head page of the fullness list for
source and destination pages, and how it reinserts those pages during each
iteration. The algorithm may first use a page as a migration destination
and then as a migration source, leading to an unnecessary back-and-forth
movement of objects.
Consider the following fullness list:
PageA PageB PageC PageD PageE
During the first iteration, the compaction algorithm will select PageA as
the source and PageB as the destination. All of PageA's objects will be
moved to PageB, and then PageA will be released while PageB is reinserted
into the fullness list.
PageB PageC PageD PageE
During the next iteration, the compaction algorithm will again select the
head of the list as the source and destination, meaning that PageB will
now serve as the source and PageC as the destination. This will result in
the objects being moved away from PageB, the same objects that were just
moved to PageB in the previous iteration.
To prevent this avalanche effect, the compaction algorithm should not
reinsert the destination page between iterations. By doing so, the most
optimal page will continue to be used and its usage ratio will increase,
reducing internal fragmentation. The destination page should only be
reinserted into the fullness list if:
- It becomes full
- No source page is available.
TEST
====
It's very challenging to reliably test this series. I ended up developing
my own synthetic test that has 100% reproducibility. The test generates
significan fragmentation (for each size class) and then performs
compaction for each class individually and tracks the number of memcpy()
in zs_object_copy(), so that we can compare the amount work compaction
does on per-class basis.
Total amount of work (zram mm_stat objs_moved)
----------------------------------------------
Old fullness grouping, old compaction algorithm:
323977 memcpy() in zs_object_copy().
Old fullness grouping, new compaction algorithm:
262944 memcpy() in zs_object_copy().
New fullness grouping, new compaction algorithm:
213978 memcpy() in zs_object_copy().
Per-class compaction memcpy() comparison (T-test)
-------------------------------------------------
x Old fullness grouping, old compaction algorithm
+ Old fullness grouping, new compaction algorithm
N Min Max Median Avg Stddev
x 140 349 3513 2461 2314.1214 806.03271
+ 140 289 2778 2006 1878.1714 641.02073
Difference at 95.0% confidence
-435.95 +/- 170.595
-18.8387% +/- 7.37193%
(Student's t, pooled s = 728.216)
x Old fullness grouping, old compaction algorithm
+ New fullness grouping, new compaction algorithm
N Min Max Median Avg Stddev
x 140 349 3513 2461 2314.1214 806.03271
+ 140 226 2279 1644 1528.4143 524.85268
Difference at 95.0% confidence
-785.707 +/- 159.331
-33.9527% +/- 6.88516%
(Student's t, pooled s = 680.132)
Link: https://lkml.kernel.org/r/20230304034835.2082479-4-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Each zspage maintains ->inuse counter which keeps track of the number of
objects stored in the zspage. The ->inuse counter also determines the
zspage's "fullness group" which is calculated as the ratio of the "inuse"
objects to the total number of objects the zspage can hold
(objs_per_zspage). The closer the ->inuse counter is to objs_per_zspage,
the better.
Each size class maintains several fullness lists, that keep track of
zspages of particular "fullness". Pages within each fullness list are
stored in random order with regard to the ->inuse counter. This is
because sorting the zspages by ->inuse counter each time obj_malloc() or
obj_free() is called would be too expensive. However, the ->inuse counter
is still a crucial factor in many situations.
For the two major zsmalloc operations, zs_malloc() and zs_compact(), we
typically select the head zspage from the corresponding fullness list as
the best candidate zspage. However, this assumption is not always
accurate.
For the zs_malloc() operation, the optimal candidate zspage should have
the highest ->inuse counter. This is because the goal is to maximize the
number of ZS_FULL zspages and make full use of all allocated memory.
For the zs_compact() operation, the optimal source zspage should have the
lowest ->inuse counter. This is because compaction needs to move objects
in use to another page before it can release the zspage and return its
physical pages to the buddy allocator. The fewer objects in use, the
quicker compaction can release the zspage. Additionally, compaction is
measured by the number of pages it releases.
This patch reworks the fullness grouping mechanism. Instead of having two
groups - ZS_ALMOST_EMPTY (usage ratio below 3/4) and ZS_ALMOST_FULL (usage
ration above 3/4) - that result in too many zspages being included in the
ALMOST_EMPTY group for specific classes, size classes maintain a larger
number of fullness lists that give strict guarantees on the minimum and
maximum ->inuse values within each group. Each group represents a 10%
change in the ->inuse ratio compared to neighboring groups. In essence,
there are groups for zspages with 0%, 10%, 20% usage ratios, and so on, up
to 100%.
This enhances the selection of candidate zspages for both zs_malloc() and
zs_compact(). A printout of the ->inuse counters of the first 7 zspages
per (random) class fullness group:
class-768 objs_per_zspage 16:
fullness 100%: empty
fullness 99%: empty
fullness 90%: empty
fullness 80%: empty
fullness 70%: empty
fullness 60%: 8 8 9 9 8 8 8
fullness 50%: empty
fullness 40%: 5 5 6 5 5 5 5
fullness 30%: 4 4 4 4 4 4 4
fullness 20%: 2 3 2 3 3 2 2
fullness 10%: 1 1 1 1 1 1 1
fullness 0%: empty
The zs_malloc() function searches through the groups of pages starting
with the one having the highest usage ratio. This means that it always
selects a zspage from the group with the least internal fragmentation
(highest usage ratio) and makes it even less fragmented by increasing its
usage ratio.
The zs_compact() function, on the other hand, begins by scanning the group
with the highest fragmentation (lowest usage ratio) to locate the source
page. The first available zspage is selected, and then the function moves
downward to find a destination zspage in the group with the lowest
internal fragmentation (highest usage ratio).
Link: https://lkml.kernel.org/r/20230304034835.2082479-3-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "zsmalloc: fine-grained fullness and new compaction
algorithm", v4.
Existing zsmalloc page fullness grouping leads to suboptimal page
selection for both zs_malloc() and zs_compact(). This patchset reworks
zsmalloc fullness grouping/classification.
Additinally it also implements new compaction algorithm that is expected
to use less CPU-cycles (as it potentially does fewer memcpy-s in
zs_object_copy()).
Test (synthetic) results can be seen in patch 0003.
This patch (of 4):
This optimization has no effect. It only ensures that when a zspage was
added to its corresponding fullness list, its "inuse" counter was higher
or lower than the "inuse" counter of the zspage at the head of the list.
The intention was to keep busy zspages at the head, so they could be
filled up and moved to the ZS_FULL fullness group more quickly. However,
this doesn't work as the "inuse" counter of a zspage can be modified by
obj_free() but the zspage may still belong to the same fullness list. So,
fix_fullness_group() won't change the zspage's position in relation to the
head's "inuse" counter, leading to a largely random order of zspages
within the fullness list.
For instance, consider a printout of the "inuse" counters of the first 10
zspages in a class that holds 93 objects per zspage:
ZS_ALMOST_EMPTY: 36 67 68 64 35 54 63 52
As we can see the zspage with the lowest "inuse" counter
is actually the head of the fullness list.
Remove this pointless "optimisation".
Link: https://lkml.kernel.org/r/20230304034835.2082479-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20230304034835.2082479-2-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Using order 4 pages would be helpful for IOMMUs mapping, but trying to get
order 4 pages could spend quite much time in the page allocation. From
the perspective of responsiveness, the deterministic memory allocation
speed, I think, is quite important.
The order 4 allocation with __GFP_RECLAIM may spend much time in reclaim
and compation logic. __GFP_NORETRY also may affect. These cause
unpredictable delay.
To get reasonable allocation speed from dma-buf system heap, use
HIGH_ORDER_GFP for order 4 to avoid reclaim. And let me remove
meaningless __GFP_COMP for order 0.
According to my tests, order 4 with MID_ORDER_GFP could get more number
of order 4 pages but the elapsed times could be very slow.
time order 8 order 4 order 0
584 usec 0 160 0
28,428 usec 0 160 0
100,701 usec 0 160 0
76,645 usec 0 160 0
25,522 usec 0 160 0
38,798 usec 0 160 0
89,012 usec 0 160 0
23,015 usec 0 160 0
73,360 usec 0 160 0
76,953 usec 0 160 0
31,492 usec 0 160 0
75,889 usec 0 160 0
84,551 usec 0 160 0
84,352 usec 0 160 0
57,103 usec 0 160 0
93,452 usec 0 160 0
If HIGH_ORDER_GFP is used for order 4, the number of order 4 could be
decreased but the elapsed time results were quite stable and fast enough.
time order 8 order 4 order 0
1,356 usec 0 155 80
1,901 usec 0 11 2384
1,912 usec 0 0 2560
1,911 usec 0 0 2560
1,884 usec 0 0 2560
1,577 usec 0 0 2560
1,366 usec 0 0 2560
1,711 usec 0 0 2560
1,635 usec 0 28 2112
544 usec 10 0 0
633 usec 2 128 0
848 usec 0 160 0
729 usec 0 160 0
1,000 usec 0 160 0
1,358 usec 0 160 0
2,638 usec 0 31 2064
Link: https://lkml.kernel.org/r/20230303050332.10138-1-jaewon31.kim@samsung.com
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Reviewed-by: John Stultz <jstultz@google.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN must see as many memory accesses as possible to prevent false
positive reports. Fall back to versions of
memset16()/memset32()/memset64() implemented in lib/string.c instead of
those written in assembly.
Link: https://lkml.kernel.org/r/20230303141433.3422671-3-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 5478afc55a ("kmsan: fix memcpy tests") uses OPTIMIZER_HIDE_VAR()
to hide the uninitialized var from the compiler optimizations.
However OPTIMIZER_HIDE_VAR(uninit) enforces an immediate check of @uninit,
so memcpy tests did not actually check the behavior of memcpy(), because
they always contained a KMSAN report.
Replace OPTIMIZER_HIDE_VAR() with a file-local macro that just clobbers
the memory with a barrier(), and add a test case for memcpy() that does
not expect an error report.
Also reflow kmsan_test.c with clang-format.
Link: https://lkml.kernel.org/r/20230303141433.3422671-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
clang -fsanitize=kernel-memory already replaces calls to
memset/memcpy/memmove and their __builtin_ versions with
__msan_memset/__msan_memcpy/__msan_memmove in instrumented files, so
there is no need to override them.
In non-instrumented versions we are now required to leave memset() and
friends intact, so we cannot replace them with __msan_XXX() functions.
Link: https://lkml.kernel.org/r/20230303141433.3422671-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Explicit memcg uncharging is not needed when the memcg accounting has the
same lifespan of the page/folio. That becomes the case for khugepaged
after Yang & Zach's recent rework so the hpage will be allocated for each
collapse rather than being cached.
Cleanup the explicit memcg uncharge in khugepaged failure path and leave
that for put_page().
Link: https://lkml.kernel.org/r/20230303151218.311015-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the following commit arch_make_huge_pte() should be used directly in
generic memory subsystem as a platform provided page table helper, instead
of pte_mkhuge(). Change hugetlb_basic_tests() to call
arch_make_huge_pte() directly, and update its relevant documentation entry
as required.
'commit 16785bd774 ("mm: merge pte_mkhuge() call into arch_make_huge_pte()")'
Link: https://lkml.kernel.org/r/20230302114845.421674-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/1ea45095-0926-a56a-a273-816709e9075e@csgroup.eu/
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the following commit, arch_make_huge_pte() should be used directly
in generic memory subsystem as a platform provided page table helper,
instead of pte_mkhuge(). This just drops pte_mkhuge() from
remove_migration_pte(), which has now become redundant.
'commit 16785bd774 ("mm: merge pte_mkhuge() call into arch_make_huge_pte()")'
Link: https://lkml.kernel.org/r/20230302025349.358341-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/1ea45095-0926-a56a-a273-816709e9075e@csgroup.eu/
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All the callers of cgroup_throttle_swaprate() are converted to
folio_throttle_swaprate(), so make __cgroup_throttle_swaprate() to take a
folio, and rename it to __folio_throttle_swaprate(), also rename gfp_mask
to gfp and drop redundant extern keyword. finally, drop unused
cgroup_throttle_swaprate().
Link: https://lkml.kernel.org/r/20230302115835.105364-8-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly use folio_throttle_swaprate() instead of
cgroup_throttle_swaprate().
Link: https://lkml.kernel.org/r/20230302115835.105364-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly use folio_throttle_swaprate() instead of
cgroup_throttle_swaprate().
Link: https://lkml.kernel.org/r/20230302115835.105364-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly use folio_throttle_swaprate() instead of
cgroup_throttle_swaprate().
Link: https://lkml.kernel.org/r/20230302115835.105364-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly use folio_throttle_swaprate() instead of
cgroup_throttle_swaprate().
Link: https://lkml.kernel.org/r/20230302115835.105364-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly use folio_throttle_swaprate() instead of
cgroup_throttle_swaprate().
Link: https://lkml.kernel.org/r/20230302115835.105364-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: remove cgroup_throttle_swaprate() completely", v2.
Convert all the caller functions of cgroup_throttle_swaprate() to use
folios, and use folio_throttle_swaprate(), which allows us to remove
cgroup_throttle_swaprate() completely.
This patch (of 7):
Convert from page to folio within __do_huge_pmd_anonymous_page(), as we
need the precise page which is to be stored at this PTE in the folio, the
function still keep a page as the parameter.
Link: https://lkml.kernel.org/r/20230302115835.105364-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230302115835.105364-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of changing the page's tag solely in order to obtain a pointer
with a match-all tag and then changing it back again, just convert the
pointer that we get from kmap_atomic() into one with a match-all tag
before passing it to clear_page().
On a certain microarchitecture, this has been observed to cause a
measurable improvement in microbenchmark performance, presumably as a
result of being able to avoid the atomic operations on the page tag.
Link: https://lkml.kernel.org/r/20230216195924.3287772-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I0249822cc29097ca7a04ad48e8eb14871f80e711
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are several 'malloc' calls in test_memcontrol, which can be
unsuccessful. This patch will add 'malloc' failures checking to give more
details about test's fail reasons and avoid possible undefined behavior
during the future null dereference (like the one in
alloc_anon_50M_check_swap function).
Link: https://lkml.kernel.org/r/20230226131634.34366-1-ivan.orlov0322@gmail.com
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old
in set_tlb_ubc_flush_pending. 86 CMPXCHG instruction returns success in
ZF flag, so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails.
No functional change intended.
Link: https://lkml.kernel.org/r/20230227214228.3533299-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
%pGp format is used to display 'flags' field of a struct page. However,
some page flags (i.e. PG_buddy, see page-flags.h for more details) are
stored in page_type field. To display human-readable output of page_type,
introduce %pGt format.
It is important to note the meaning of bits are different in page_type.
if page_type is 0xffffffff, no flags are set. Setting PG_buddy
(0x00000080) flag results in a page_type of 0xffffff7f. Clearing a bit
actually means setting a flag. Bits in page_type are inverted when
displaying type names.
Only values for which page_type_has_type() returns true are considered as
page_type, to avoid confusion with mapcount values. if it returns false,
only raw values are displayed and not page type names.
Link: https://lkml.kernel.org/r/20230130042514.2418-3-42.hyeyoo@gmail.com
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com> [vsprintf part]
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, printk: introduce new format for page_type", v4.
This series moves PG_slab page flag to page_type, freeing one bit in
page->flags and introduces %pGt format that prints human-readable
page_type like %pGp for printing page flags.
See changelog of patch 2 for more implementation details.
Thanks everyone that gave valuable comments.
This patch (of 3):
Use helper macro to decrease chances of typo when defining pageflag_names.
Link: https://lkml.kernel.org/r/20230130042514.2418-1-42.hyeyoo@gmail.com
Link: https://lore.kernel.org/lkml/Y6AycLbpjVzXM5I9@smile.fi.intel.com
Link: https://lkml.kernel.org/r/20230130042514.2418-2-42.hyeyoo@gmail.com
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds the following tracepoints to ksm:
- start / stop scan
- ksm enter / exit
- merge a page
- merge a page with ksm
- remove a page
- remove a rmap item
This patch has been split off from the RFC patch series "mm:
process/cgroup ksm support".
Link: https://lkml.kernel.org/r/20230210214645.2720847-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On a 16-socket 192-core POWER8 system, the context_switch1_threads
benchmark from will-it-scale (see earlier changelog), upstream can achieve
a rate of about 1 million context switches per second, due to contention
on the mm refcount.
64s meets the prerequisites for CONFIG_MMU_LAZY_TLB_SHOOTDOWN, so enable
the option. This increases the above benchmark to 118 million context
switches per second.
This generates 314 additional IPI interrupts on a 144 CPU system doing a
kernel compile, which is in the noise in terms of kernel cycles.
Link: https://lkml.kernel.org/r/20230203071837.1136453-6-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On big systems, the mm refcount can become highly contented when doing a
lot of context switching with threaded applications. user<->idle switch
is one of the important cases. Abandoning lazy tlb entirely slows this
switching down quite a bit in the common uncontended case, so that is not
viable.
Implement a scheme where lazy tlb mm references do not contribute to the
refcount, instead they get explicitly removed when the refcount reaches
zero.
The final mmdrop() sends IPIs to all CPUs in the mm_cpumask and they
switch away from this mm to init_mm if it was being used as the lazy tlb
mm. Enabling the shoot lazies option therefore requires that the arch
ensures that mm_cpumask contains all CPUs that could possibly be using mm.
A DEBUG_VM option IPIs every CPU in the system after this to ensure there
are no references remaining before the mm is freed.
Shootdown IPIs cost could be an issue, but they have not been observed to
be a serious problem with this scheme, because short-lived processes tend
not to migrate CPUs much, therefore they don't get much chance to leave
lazy tlb mm references on remote CPUs. There are a lot of options to
reduce them if necessary, described in comments.
The near-worst-case can be benchmarked with will-it-scale:
context_switch1_threads -t $(($(nproc) / 2))
This will create nproc threads (nproc / 2 switching pairs) all sharing the
same mm that spread over all CPUs so each CPU does thread->idle->thread
switching.
[ Rik came up with basically the same idea a few years ago, so credit
to him for that. ]
Link: https://lore.kernel.org/linux-mm/20230118080011.2258375-1-npiggin@gmail.com/
Link: https://lore.kernel.org/all/20180728215357.3249-11-riel@surriel.com/
Link: https://lkml.kernel.org/r/20230203071837.1136453-5-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add CONFIG_MMU_TLB_REFCOUNT which enables refcounting of the lazy tlb mm
when it is context switched. This can be disabled by architectures that
don't require this refcounting if they clean up lazy tlb mms when the last
refcount is dropped. Currently this is always enabled, so the patch
introduces no functional change.
Link: https://lkml.kernel.org/r/20230203071837.1136453-4-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
