The Receive completion handler doesn't look at the contents of the
Receive buffer. The DMA sync isn't terribly expensive but it's one
less thing that needs to be done by the Receive completion handler,
which is single-threaded (per svc_xprt). This helps scalability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is similar to commit e340c2d6ef ("xprtrdma: Reduce the
doorbell rate (Receive)") which added Receive batching to the
client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. We are not permitted to remove old proc files. Instead,
convert these variables to stubs that are only ever allowed to
display a value of zero.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that we have an efficient mechanism to update these two stats,
let's start maintaining them again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Receives are frequent events. Avoid the overhead of a memory bus
lock cycle for counting a value that is hardly every used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Avoid exposing parent of root directory in NFSv3 READDIRPLUS results
- Fix a tracepoint change that went in the initial 5.11 merge
-----BEGIN PGP SIGNATURE-----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=Qf5O
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Avoid exposing parent of root directory in NFSv3 READDIRPLUS results
- Fix a tracepoint change that went in the initial 5.11 merge
* tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Move the svc_xdr_recvfrom tracepoint again
nfsd4: readdirplus shouldn't return parent of export
Commit 156708adf2 ("SUNRPC: Move the svc_xdr_recvfrom()
tracepoint") tried to capture the correct XID in the trace record,
but this line in svc_recv:
rqstp->rq_xid = svc_getu32(&rqstp->rq_arg.head[0]);
alters the size of rq_arg.head[0].iov_len. The tracepoint records
the correct XID but an incorrect value for the length of the
xdr_buf's head.
To keep the trace callsites simple, I've created two trace classes.
One assumes the xdr_buf contains a full RPC message, and the XID
can be extracted from it. The other assumes the contents of the
xdr_buf are arbitrary, and the xid will be provided by the caller.
Currently there is only one user of each class, but I expect we will
need a few more tracepoints using each class as time goes on.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Highlights include:
Bugfixes:
- Fix parsing of link-local IPv6 addresses
- Fix confusing logging of mount errors that was introduced by the
fsopen() patchset.
- Fix a tracing use after free in _nfs4_do_setlk()
- Layout return-on-close fixes when called from nfs4_evict_inode()
- Layout segments were being leaked in pnfs_generic_clear_request_commit()
- Don't leak DS commits in pnfs_generic_retry_commit()
- Fix an Oopsable use-after-free when nfs_delegation_find_inode_server()
calls iput() on an inode after the super block has gone away.
-----BEGIN PGP SIGNATURE-----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=08H3
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
- Fix parsing of link-local IPv6 addresses
- Fix confusing logging of mount errors that was introduced by the
fsopen() patchset.
- Fix a tracing use after free in _nfs4_do_setlk()
- Layout return-on-close fixes when called from nfs4_evict_inode()
- Layout segments were being leaked in
pnfs_generic_clear_request_commit()
- Don't leak DS commits in pnfs_generic_retry_commit()
- Fix an Oopsable use-after-free when nfs_delegation_find_inode_server()
calls iput() on an inode after the super block has gone away"
* tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: nfs_igrab_and_active must first reference the superblock
NFS: nfs_delegation_find_inode_server must first reference the superblock
NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter
NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()
NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing the request
pNFS: Stricter ordering of layoutget and layoutreturn
pNFS: Clean up pnfs_layoutreturn_free_lsegs()
pNFS: We want return-on-close to complete when evicting the inode
pNFS: Mark layout for return if return-on-close was not sent
net: sunrpc: interpret the return value of kstrtou32 correctly
NFS: Adjust fs_context error logging
NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock
A return value of 0 means success. This is documented in lib/kstrtox.c.
This was found by trying to mount an NFS share from a link-local IPv6
address with the interface specified by its index:
mount("[fe80::1%1]:/srv/nfs", "/mnt", "nfs", 0, "nolock,addr=fe80::1%1")
Before this commit this failed with EINVAL and also caused the following
message in dmesg:
[...] NFS: bad IP address specified: addr=fe80::1%1
The syscall using the same address based on the interface name instead
of its index succeeds.
Credits for this patch go to my colleague Christian Speich, who traced
the origin of this bug to this line of code.
Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de>
Fixes: 00cfaa943e ("replace strict_strto calls")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Daire Byrne reports a ~50% aggregrate throughput regression on his
Linux NFS server after commit da1661b93b ("SUNRPC: Teach server to
use xprt_sock_sendmsg for socket sends"), which replaced
kernel_send_page() calls in NFSD's socket send path with calls to
sock_sendmsg() using iov_iter.
Investigation showed that tcp_sendmsg() was not using zero-copy to
send the xdr_buf's bvec pages, but instead was relying on memcpy.
This means copying every byte of a large NFS READ payload.
It looks like TLS sockets do indeed support a ->sendpage method,
so it's really not necessary to use xprt_sock_sendmsg() to support
TLS fully on the server. A mechanical reversion of da1661b93b is
not possible at this point, but we can re-implement the server's
TCP socket sendmsg path using kernel_sendpage().
Reported-by: Daire Byrne <daire@dneg.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209439
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Highlights include:
Features:
- NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
support.
- A series of patches to improve readdir performance, particularly with
large directories.
- Basic support for using NFS/RDMA with the pNFS files and flexfiles
drivers.
- Micro-optimisations for RDMA.
- RDMA tracing improvements.
Bugfixes:
- Fix a long standing bug with xs_read_xdr_buf() when receiving partial
pages (Dan Aloni).
- Various fixes for getxattr and listxattr, when used over non-TCP
transports.
- Fixes for containerised NFS from Sargun Dhillon.
- switch nfsiod to be an UNBOUND workqueue (Neil Brown).
- READDIR should not ask for security label information if there is no
LSM policy. (Olga Kornievskaia)
- Avoid using interval-based rebinding with TCP in lockd (Calum Mackay).
- A series of RPC and NFS layer fixes to support the NFSv4.2 READ_PLUS code.
- A couple of fixes for pnfs/flexfiles read failover
Cleanups:
- Various cleanups for the SUNRPC xdr code in conjunction with the
READ_PLUS fixes.
-----BEGIN PGP SIGNATURE-----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=IKWG
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
support
- A series of patches to improve readdir performance, particularly
with large directories
- Basic support for using NFS/RDMA with the pNFS files and flexfiles
drivers
- Micro-optimisations for RDMA
- RDMA tracing improvements
Bugfixes:
- Fix a long standing bug with xs_read_xdr_buf() when receiving
partial pages (Dan Aloni)
- Various fixes for getxattr and listxattr, when used over non-TCP
transports
- Fixes for containerised NFS from Sargun Dhillon
- switch nfsiod to be an UNBOUND workqueue (Neil Brown)
- READDIR should not ask for security label information if there is
no LSM policy (Olga Kornievskaia)
- Avoid using interval-based rebinding with TCP in lockd (Calum
Mackay)
- A series of RPC and NFS layer fixes to support the NFSv4.2
READ_PLUS code
- A couple of fixes for pnfs/flexfiles read failover
Cleanups:
- Various cleanups for the SUNRPC xdr code in conjunction with the
READ_PLUS fixes"
* tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits)
NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read()
pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read
NFSv4/pnfs: Add tracing for the deviceid cache
fs/lockd: convert comma to semicolon
NFSv4.2: fix error return on memory allocation failure
NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet
NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow
NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow
NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer
NFSv4.2: decode_read_plus_hole() needs to check the extent offset
NFSv4.2: decode_read_plus_data() must skip padding after data segment
NFSv4.2: Ensure we always reset the result->count in decode_read_plus()
SUNRPC: When expanding the buffer, we may need grow the sparse pages
SUNRPC: Cleanup - constify a number of xdr_buf helpers
SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field
SUNRPC: _copy_to/from_pages() now check for zero length
SUNRPC: Cleanup xdr_shrink_bufhead()
SUNRPC: Fix xdr_expand_hole()
SUNRPC: Fixes for xdr_align_data()
SUNRPC: _shift_data_left/right_pages should check the shift length
...
- Improve support for re-exporting NFS mounts
- Replace NFSv4 XDR decoding C macros with xdr_stream helpers
- Support for multiple RPC/RDMA chunks per RPC transaction
-----BEGIN PGP SIGNATURE-----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=1uP3
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.11' of git://git.linux-nfs.org/projects/cel/cel-2.6
Pull nfsd updates from Chuck Lever:
"Several substantial changes this time around:
- Previously, exporting an NFS mount via NFSD was considered to be an
unsupported feature. With v5.11, the community has attempted to
make re-exporting a first-class feature of NFSD.
This would enable the Linux in-kernel NFS server to be used as an
intermediate cache for a remotely-located primary NFS server, for
example, even with other NFS server implementations, like a NetApp
filer, as the primary.
- A short series of patches brings support for multiple RPC/RDMA data
chunks per RPC transaction to the Linux NFS server's RPC/RDMA
transport implementation.
This is a part of the RPC/RDMA spec that the other premiere
NFS/RDMA implementation (Solaris) has had for a very long time, and
completes the implementation of RPC/RDMA version 1 in the Linux
kernel's NFS server.
- Long ago, NFSv4 support was introduced to NFSD using a series of C
macros that hid dprintk's and goto's. Over time, the kernel's XDR
implementation has been greatly improved, but these C macros have
remained and become fallow. A series of patches in this pull
request completely replaces those macros with the use of current
kernel XDR infrastructure. Benefits include:
- More robust input sanitization in NFSD's NFSv4 XDR decoders.
- Make it easier to use common kernel library functions that use
XDR stream APIs (for example, GSS-API).
- Align the structure of the source code with the RFCs so it is
easier to learn, verify, and maintain our XDR implementation.
- Removal of more than a hundred hidden dprintk() call sites.
- Removal of some explicit manipulation of pages to help make the
eventual transition to xdr->bvec smoother.
- On top of several related fixes in 5.10-rc, there are a few more
fixes to get the Linux NFSD implementation of NFSv4.2 inter-server
copy up to speed.
And as usual, there is a pinch of seasoning in the form of a
collection of unrelated minor bug fixes and clean-ups.
Many thanks to all who contributed this time around!"
* tag 'nfsd-5.11' of git://git.linux-nfs.org/projects/cel/cel-2.6: (131 commits)
nfsd: Record NFSv4 pre/post-op attributes as non-atomic
nfsd: Set PF_LOCAL_THROTTLE on local filesystems only
nfsd: Fix up nfsd to ensure that timeout errors don't result in ESTALE
exportfs: Add a function to return the raw output from fh_to_dentry()
nfsd: close cached files prior to a REMOVE or RENAME that would replace target
nfsd: allow filesystems to opt out of subtree checking
nfsd: add a new EXPORT_OP_NOWCC flag to struct export_operations
Revert "nfsd4: support change_attr_type attribute"
nfsd4: don't query change attribute in v2/v3 case
nfsd: minor nfsd4_change_attribute cleanup
nfsd: simplify nfsd4_change_info
nfsd: only call inode_query_iversion in the I_VERSION case
nfs_common: need lock during iterate through the list
NFSD: Fix 5 seconds delay when doing inter server copy
NFSD: Fix sparse warning in nfs4proc.c
SUNRPC: Remove XDRBUF_SPARSE_PAGES flag in gss_proxy upcall
sunrpc: clean-up cache downcall
nfsd: Fix message level for normal termination
NFSD: Remove macros that are no longer used
NFSD: Replace READ* macros in nfsd4_decode_compound()
...
If we're shifting the page data to the right, and this happens to be a
sparse page array, then we may need to allocate new pages in order to
receive the data.
Reported-by: "Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There are a number of xdr helpers for struct xdr_buf that do not change
the structure itself. Mark those as taking const pointers for
documentation purposes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Move the setting of the xdr_stream 'nwords' field into the helpers that
reset the xdr_stream cursor.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We do want to try to grow the buffer if possible, but if that attempt
fails, we still want to move the data and truncate the XDR message.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The main use case right now for xdr_align_data() is to shift the page
data to the left, and in practice shrink the total XDR data buffer.
This patch ensures that we fix up the accounting for the buffer length
as we shift that data around.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Olga K. observed that rpcrdma_marsh_req() allocates sparse pages
only when it has determined that a Reply chunk is necessary. There
are plenty of cases where no Reply chunk is needed, but the
XDRBUF_SPARSE_PAGES flag is set. The result would be a crash in
rpcrdma_inline_fixup() when it tries to copy parts of the received
Reply into a missing page.
To avoid crashing, handle sparse page allocation up front.
Until XATTR support was added, this issue did not appear often
because the only SPARSE_PAGES consumer always expected a reply large
enough to always require a Reply chunk.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When receiving pages data, return value 'ret' when positive includes
`buf->page_base`, so we should subtract that before it is used for
changing `offset` and comparing against `want`.
This was discovered on the very rare cases where the server returned a
chunk of bytes that when added to the already received amount of bytes
for the pages happened to match the current `recv.len`, for example
on this case:
buf->page_base : 258356
actually received from socket: 1740
ret : 260096
want : 260096
In this case neither of the two 'if ... goto out' trigger, and we
continue to tail parsing.
Worth to mention that the ensuing EMSGSIZE from the continued execution of
`xs_read_xdr_buf` may be observed by an application due to 4 superfluous
bytes being added to the pages data.
Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching to using iterators")
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There's no need to defer allocation of pages for the receive buffer.
- This upcall is quite infrequent
- gssp_alloc_receive_pages() can allocate the pages with GFP_KERNEL,
unlike the transport
- gssp_alloc_receive_pages() knows exactly how many pages are needed
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
We can simplify code around cache_downcall unifying memory
allocations using kvmalloc. This has the benefit of getting rid of
cache_slow_downcall (and queue_io_mutex), and also matches userland
allocation size and limits.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
'snprintf' returns the number of characters which would have been written
if enough space had been available, excluding the terminating null byte.
Thus, the return value of 'sizeof(buf)' means that the last character
has been dropped.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Fixes: 2f34b8bfae ("SUNRPC: add links for all client xprts to debugfs")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
While we always want to align to the next page and/or the beginning of
the tail buffer when we call xdr_set_next_page(), the functions
xdr_align_data() and xdr_expand_hole() really want to align to the next
object in that next page or tail.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
rpc_prepare_reply_pages() currently expects the 'hdrsize' argument to
contain the length of the data that we expect to want placed in the head
kvec plus a count of 1 word of padding that is placed after the page data.
This is very confusing when trying to read the code, and sometimes leads
to callers adding an arbitrary value of '1' just in order to satisfy the
requirement (whether or not the page data actually needs such padding).
This patch aims to clarify the code by changing the 'hdrsize' argument
to remove that 1 word of padding. This means we need to subtract the
padding from all the existing callers.
Fixes: 02ef04e432 ("NFS: Account for XDR pad of buf->pages")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up xdr_read_pages() so that it can handle object lengths that are
larger than the page length, by simply aligning to the next object in
the buffer tail.
The function will continue to return the length of the truncate object
data that actually fit into the pages.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Allow xdr_set_iov() to set a base so that we can use it to set the
cursor to a specific position in the kvec buffer.
If the new base overflows the kvec/pages buffer in either xdr_set_iov()
or xdr_set_page_base(), then truncate it so that we point to the end of
the buffer.
Finally, change both function to return the number of bytes remaining to
read in their buffers.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We already know that the head buffer and page are empty, so if there is
any data, it is in the tail.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After we've looked up the transport module, we need to ensure it can't
go away until we've finished running the transport setup code.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
According to RFC5666, the correct netid for an IPv6 addressed RDMA
transport is "rdma6", which we've supported as a mount option since
Linux-4.7. The problem is when we try to load the module "xprtrdma6",
that will fail, since there is no modulealias of that name.
Fixes: 181342c5eb ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently, we wake up the tasks by priority queue ordering, which means
that we ignore the batching that is supposed to help with QoS issues.
Fixes: c049f8ea9a ("SUNRPC: Remove the bh-safe lock requirement on the rpc_wait_queue->lock")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There's no need to defer allocation of pages for the receive buffer.
- This upcall is quite infrequent
- gssp_alloc_receive_pages() can allocate the pages with GFP_KERNEL,
unlike the transport
- gssp_alloc_receive_pages() knows exactly how many pages are needed
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Convert the READ_BUF macro in nfs4xdr.c from open code to instead
use the new xdr_stream-style decoders already in use by the encode
side (and by the in-kernel NFS client implementation). Once this
conversion is done, each individual NFSv4 argument decoder can be
independently cleaned up to replace these macros with C code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A "permanent" struct xdr_stream is allocated in struct svc_rqst so
that it is usable by all server-side decoders. A per-rqst scratch
buffer is also allocated to handle decoding XDR data items that
cross page boundaries.
To demonstrate how it will be used, add the first call site for the
new svcxdr_init_decode() API.
As an additional part of the overall conversion, add symbolic
constants for successful and failed XDR operations. Returning "0" is
overloaded. Sometimes it means something failed, but sometimes it
means success. To make it more clear when XDR decoding functions
succeed or fail, introduce symbolic constants.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit c509f15a58 ("SUNRPC: Split the xdr_buf event class") added
display of the rqst's XID to the svc_xdr_buf_class. However, when
the recvfrom tracepoint fires, rq_xid has yet to be filled in with
the current XID. So it ends up recording the previous XID that was
handled by that svc_rqst.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
An efficient way to handle multiple Read chunks is to post them all
together and then take a single completion. This is also how the
code is already structured: when the Read completion fires, all
portions of the incoming RPC message are available to be assembled.
The difficult problem is setting up the Read sink buffers so that
the server pulls the client's data into place, making subsequent
pull-up unnecessary. There are several cases:
* No Read chunks. No-op.
* One data item Read chunk. This is the fast case, where the inline
part of the RPC-over-RDMA message becomes the head and tail, and
the data item chunk is placed in buf->pages.
* A Position-zero Read chunk. Treated like TCP: the Read chunk is
pulled into contiguous pages.
+ A Position-zero Read chunk with data item chunks. Treated like
TCP: all of the Read chunks are pulled into contiguous pages.
+ Multiple data item chunks. Treated like TCP: the inline part is
copied and the data item chunks are pulled into contiguous pages.
The "*" cases are already supported. This patch adds support for the
"+" cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As a pre-requisite for handling multiple Read chunks in each Read
list, convert svc_rdma_recv_read_chunk() to use the new parsed Read
chunk list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I'm about to change the purpose of ri_chunklen: Instead of tracking
the number of bytes in one Read chunk, it will track the total
number of bytes in the Read list. Rename it for clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We already have trace_svcrdma_decode_rseg(), which records each
ingress Read segment. Instead of reporting those again when they
are about to be posted as RDMA Reads, let's fire one tracepoint
before posting each type of chunk.
So we'll get:
nfsd-1998 [002] 321.666615: svcrdma_decode_rseg: cq.id=4 cid=42 segno=0 position=0 192@0x013ca9ebfae14000:0xb0010b05
nfsd-1998 [002] 321.666615: svcrdma_decode_rseg: cq.id=4 cid=42 segno=1 position=0 7688@0x013ca9ebf914e000:0xb0010a05
nfsd-1998 [002] 321.666615: svcrdma_decode_rseg: cq.id=4 cid=42 segno=2 position=0 28@0x013ca9ebfae15000:0xb0010905
nfsd-1998 [002] 321.666622: svcrdma_decode_rqst: cq.id=4 cid=42 xid=0x013ca9eb vers=1 credits=128 proc=RDMA_NOMSG hdrlen=100
nfsd-1998 [002] 321.666642: svcrdma_post_read_chunk: cq.id=3 cid=112 sqecount=3
kworker/2:1H-221 [002] 321.673949: svcrdma_wc_read: cq.id=3 cid=112 status=SUCCESS (0/0x0)
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor svc_rdma_send_reply_chunk() so that it Sends only the parts
of rq_res that do not contain a result payload.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: svc_rdma_map_reply_msg() is restructured to DMA map only
the parts of rq_res that do not contain a result payload.
This change has been tested to confirm that it does not cause a
regression in the no Write chunk and single Write chunk cases.
Multiple Write chunks have not been tested.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When counting the number of SGEs needed to construct a Send request,
do not count result payloads. And, when copying the Reply message
into the pull-up buffer, result payloads are not to be copied to the
Send buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Instead of re-parsing the ingress RPC Call transport
header when constructing the egress RPC Reply transport header, use
the new parsed Write list and Reply chunk, which are version-
agnostic and already XDR decoded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Instead of re-parsing the ingress RPC Call transport
header when constructing RDMA Writes, use the new parsed chunk lists
for the Write list and Reply chunk, which are version-agnostic and
already XDR-decoded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Don't duplicate header decoding smarts here. Instead, use
the new parsed chunk lists.
Note that the XID sanity test is also removed. The XID is already
looked up by the cb handler, and is rejected if it's not recognized.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This simple data structure binds the location of each data payload
inside of an RPC message to the chunk that will be used to push it
to or pull it from the client.
There are several benefits to this small additional overhead:
* It enables support for more than one chunk in incoming Read and
Write lists.
* It translates the version-specific on-the-wire format into a
generic in-memory structure, enabling support for multiple
versions of the RPC/RDMA transport protocol.
* It enables the server to re-organize a chunk list if it needs to
adjust where Read chunk data lands in server memory without
altering the contents of the XDR-encoded Receive buffer.
Construction of these lists is done while sanity checking each
incoming RPC/RDMA header. Subsequent patches will make use of the
generated data structures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The only RPC/RDMA ordering requirement between RDMA Writes and RDMA
Sends is that the responder must post the Writes on the Send queue
before posting the Send that conveys the RPC Reply for that Write
payload.
The Linux NFS server implementation now has a transport method that
can post result Payload Writes earlier than svc_rdma_sendto:
->xpo_result_payload()
This gets RDMA Writes going earlier so they are more likely to be
complete at the remote end before the Send completes.
Some care must be taken with pulled-up Replies. We don't want to
push the Write chunk and then send the same payload data via Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Have the NFSD encoders annotate the boundaries of every
direct-data-placement eligible result data payload. Then change
svcrdma to use that annotation instead of the xdr->page_len
when handling Write chunks.
For NFSv4 on RDMA, that enables the ability to recognize multiple
result payloads per compound. This is a pre-requisite for supporting
multiple Write chunks per RPC transaction.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: "result payload" is a less confusing name for these
payloads. "READ payload" reflects only the NFS usage.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor for subsequent changes.
Constify the xdr_buf argument to ensure the code here does not
modify it, and to enable callers to pass in a
"const struct xdr_buf *".
At the same time, rename the helper functions, which emit RDMA
Writes, not RDMA Sends, and add documenting comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: Ensure the code in rw.c does not modify the argument, and
enable callers to also use "const struct xdr_buf *".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When space in the Reply chunk runs out in the middle of a segment,
we end up passing a zero-length SGL to rdma_rw_ctx_init(), and it
oopses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Some identifiers have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that rpcrdma_ep is no longer part of rpcrdma_xprt, there are
four or five serial address dereferences needed to get to the
IB device needed for DMA unmapping.
Instead, let's use the same pattern that regbufs use: cache a
pointer to the device in the MR, and use that as the indication
that unmapping is necessary.
This also guarantees that the exact same device is used for DMA
mapping and unmapping, even if the r_xprt's ep has been replaced. I
don't think this can happen today, but future changes might break
this assumption.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This function is now invoked only in frwr_ops.c. The move
enables deduplication of the trace_xprtrdma_mr_unmap() call site.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
->buf_free is called nearly once per RPC. Only rarely does
xprt_rdma_free() have to do anything, thus tracing every one of
these calls seems unnecessary. Instead, just throw a trace event
when that one occasional RPC still has MRs that need to be
released.
xprt_rdma_free() is further micro-optimized to reduce the amount of
work done in the common case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Tie each MR event to the requesting rpc_task to make it easier to
follow MR ownership and control flow.
MR unmapping and recycling can happen in the background, after an
MR's mr_req field is stale, so set up a separate tracepoint class
for those events.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Rename it following the "_err" suffix convention
- Replace display of kernel memory addresses
- Tie MR exhaustion to a peer IP address, similar to the createmrs
tracepoint
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Replace displayed kernel memory addresses
- Tie the XID and event with the peer's IP address
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Replace unnecessary display of kernel memory addresses.
Also, there are no longer any trace_xprtrdma_defer_cmp() call sites.
And remove the trace_xprtrdma_leaked_rep() tracepoint because there
doesn't seem to be an overwhelming need to have a tracepoint for
catching a software bug that has long since been fixed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Rename the tracepoints with the "_err" suffix to indicate these
are rare error events
- Replace display of kernel memory addresses
- Tie the XID and error to a connection IP address instead
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Replace the display of kernel memory addresses
- Add "_err" to the end of its name to indicate that it's a
tracepoint that fires only when there's an error
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Set up a completion ID in each rpcrdma_frwr. The ID is used to match
an incoming completion to a transport (CQ) and other MR-related
activity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Set up a completion ID in each rpcrdma_req. The ID is used to match
an incoming Send completion to a transport and to a previous
ib_post_send().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Set up a completion ID in each rpcrdma_rep. The ID is used to match
an incoming Receive completion to a transport and to a previous
ib_post_recv().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In the original code, the "if (*lenp < 0)" check didn't work because
"*lenp" is unsigned. Fortunately, the memory_read_from_buffer() call
will never fail in this context so it doesn't affect runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
You can't write to this file because the permissions are 0444. But
it sort of looked like you could do a write and it would result in
a read. Then it looked like proc_sys_call_handler() just ignored
it. Which is confusing. It's more clear if the "write" just
returns zero.
Also, the "lenp" pointer is never NULL so that check can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
has the same arguments as READ but allows the server to return an array
of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes.
-----BEGIN PGP SIGNATURE-----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=rcOj
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"The one new feature this time, from Anna Schumaker, is READ_PLUS,
which has the same arguments as READ but allows the server to return
an array of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes"
* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
sunrpc: raise kernel RPC channel buffer size
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
nfsd: remove unneeded break
net/sunrpc: Fix return value for sysctl sunrpc.transports
NFSD: Encode a full READ_PLUS reply
NFSD: Return both a hole and a data segment
NFSD: Add READ_PLUS hole segment encoding
NFSD: Add READ_PLUS data support
NFSD: Hoist status code encoding into XDR encoder functions
NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
NFSD: Remove the RETURN_STATUS() macro
NFSD: Call NFSv2 encoders on error returns
NFSD: Fix .pc_release method for NFSv2
NFSD: Remove vestigial typedefs
NFSD: Refactor nfsd_dispatch() error paths
NFSD: Clean up nfsd_dispatch() variables
NFSD: Clean up stale comments in nfsd_dispatch()
NFSD: Clean up switch statement in nfsd_dispatch()
...
- Stable Fixes:
- Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
- Fix nfs_path in case of a rename retry
- Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag
- New features and improvements:
- Replace dprintk() calls with tracepoints
- Make cache consistency bitmap dynamic
- Added support for the NFS v4.2 READ_PLUS operation
- Improvements to net namespace uniquifier
- Other bugfixes and cleanups
- Remove redundant clnt pointer
- Don't update timeout values on connection resets
- Remove redundant tracepoints
- Various cleanups to comments
- Fix oops when trying to use copy_file_range with v4.0 source server
- Improvements to flexfiles mirrors
- Add missing "local_lock=posix" mount option
-----BEGIN PGP SIGNATURE-----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=6RM5
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable Fixes:
- Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
- Fix nfs_path in case of a rename retry
- Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag
New features and improvements:
- Replace dprintk() calls with tracepoints
- Make cache consistency bitmap dynamic
- Added support for the NFS v4.2 READ_PLUS operation
- Improvements to net namespace uniquifier
Other bugfixes and cleanups:
- Remove redundant clnt pointer
- Don't update timeout values on connection resets
- Remove redundant tracepoints
- Various cleanups to comments
- Fix oops when trying to use copy_file_range with v4.0 source server
- Improvements to flexfiles mirrors
- Add missing 'local_lock=posix' mount option"
* tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits)
NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag
NFSv4: Fix up RCU annotations for struct nfs_netns_client
NFS: Only reference user namespace from nfs4idmap struct instead of cred
nfs: add missing "posix" local_lock constant table definition
NFSv4: Use the net namespace uniquifier if it is set
NFSv4: Clean up initialisation of uniquified client id strings
NFS: Decode a full READ_PLUS reply
SUNRPC: Add an xdr_align_data() function
NFS: Add READ_PLUS hole segment decoding
SUNRPC: Add the ability to expand holes in data pages
SUNRPC: Split out _shift_data_right_tail()
SUNRPC: Split out xdr_realign_pages() from xdr_align_pages()
NFS: Add READ_PLUS data segment support
NFS: Use xdr_page_pos() in NFSv4 decode_getacl()
SUNRPC: Implement a xdr_page_pos() function
SUNRPC: Split out a function for setting current page
NFS: fix nfs_path in case of a rename retry
fs: nfs: return per memcg count for xattr shrinkers
NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE
nfs: remove incorrect fallthrough label
...
When the passed token is longer than 4032 bytes, the remaining part
of the token must be copied from the rqstp->rq_arg.pages. But the
copy must make sure it happens in a consecutive way.
With the existing code, the first memcpy copies 'length' bytes from
argv->iobase, but since the header is in front, this never fills the
whole first page of in_token->pages.
The mecpy in the loop copies the following bytes, but starts writing at
the next page of in_token->pages. This leaves the last bytes of page 0
unwritten.
Symptoms were that users with many groups were not able to access NFS
exports, when using Active Directory as the KDC.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Fixes: 5866efa8cb "SUNRPC: Fix svcauth_gss_proxy_init()"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Its possible that using AUTH_SYS and mountd manage-gids option a
user may hit the 8k RPC channel buffer limit. This have been observed
on field, causing unanswered RPCs on clients after mountd fails to
write on channel :
rpc.mountd[11231]: auth_unix_gid: error writing reply
Userland nfs-utils uses a buffer size of 32k (RPC_CHAN_BUF_SIZE), so
lets match those two.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This was discovered using O_DIRECT at the client side, with small
unaligned file offsets or IOs that span multiple file pages.
Fixes: e248aa7be8 ("svcrdma: Remove max_sge check at connect time")
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix returning value for sysctl sunrpc.transports.
Return error code from sysctl proc_handler function proc_do_xprt instead of number of the written bytes.
Otherwise sysctl returns random garbage for this key.
Since v1:
- Handle negative returned value from memory_read_from_buffer as an error
Signed-off-by: Artur Molchanov <arturmolchanov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
For now, this function simply aligns the data at the beginning of the
pages. This can eventually be expanded to shift data to the correct
offsets when we're ready.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This patch adds the ability to "read a hole" into a set of XDR data
pages by taking the following steps:
1) Shift all data after the current xdr->p to the right, possibly into
the tail,
2) Zero the specified range, and
3) Update xdr->p to point beyond the hole.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xdr_shrink_pagelen() is very similar to what we need for hole expansion,
so split out the common code into its own function that can be used by
both functions.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I don't need the entire align pages code for READ_PLUS, so split out the
part I do need so I don't need to reimplement anything.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I'll need this for READ_PLUS to help figure out the offset where page
data is stored at, but it might also be useful for other things.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I'm going to need this bit of code in a few places for READ_PLUS
decoding, so let's make it a helper function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
