Recent changes to the DMA code has resulting in the IMX driver failing
I2C transfers when the buffer has been vmalloc. Only perform DMA
transfers if the message has the I2C_M_DMA_SAFE flag set, indicating
the client is providing a buffer which is DMA safe.
This is a minimal fix for stable. The I2C core provides helpers to
allocate a bounce buffer. For a fuller fix the master should make use
of these helpers.
Fixes: 4544b9f25e ("dma-mapping: Add vmap checks to dma_map_single()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix to return a negative error code from the gi2c->err instead of
0.
Fixes: d8703554f4 ("i2c: qcom-geni: Add support for GPI DMA")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasoluitons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c
devices that have no pinctrl defined. There is no requirement for this
to exist in the DT. This has worked perfectly well without this before in
at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to
talk to a tda99xx phy). Adding the requirement to have pinctrl set up in
the device tree (or otherwise be found) is a regression where the whole
i2c device is lost entirely (in this case dropping entire devices which
then leads to the drm display stack unable to find the phy for display
output, thus having no drm display device and so on down the chain).
This converts the above commit to an enhancement if pinctrl can be found
for the i2c device, providing a timeout on read with recovery, but if not,
do what used to be done rather than a fatal loss of a device.
This restores the mentioned display devices to their working state again.
Fixes: 58b924241d ("i2c: cadence: Add standard bus recovery support")
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
[wsa: added braces to else-branch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A driver that supports I2C_DRV_ACPI_WAIVE_D0_PROBE is not expected to
power off a device that it has not powered on previously.
For devices operating in "full_power" mode, the first call to
`i2c_acpi_waive_d0_probe` will return 0, which means that the device
will be turned on with `dev_pm_domain_attach`.
If probe fails the second call to `i2c_acpi_waive_d0_probe` will
return 1, which means that the device will not be turned off.
This is, it will be left in a different power state. Lets fix it.
Reviewed-by: Hidenori Kobayashi <hidenorik@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: b18c1ad685 ("i2c: Allow an ACPI driver to manage the device's power state during probe")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A problem about i2c-npcm7xx create debugfs failed is triggered with the
following log given:
[ 173.827310] debugfs: Directory 'npcm_i2c' with parent '/' already present!
The reason is that npcm_i2c_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of npcm_i2c can never be created later.
npcm_i2c_init()
debugfs_create_dir() # create debugfs directory
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when platform_driver_register() returns error.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Tali Perry <tali.perry@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Dell Vostro 5568 laptop has lis3lv02d, but its i2c address is not known
to the kernel. Add this address.
Output of "cat /sys/devices/platform/lis3lv02d/position" on Dell Vostro
5568 laptop:
- Horizontal: (-18,0,1044)
- Front elevated: (522,-18,1080)
- Left elevated: (-18,-360,1080)
- Upside down: (36,108,-1134)
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When the I2C controllers are running in DMA mode, it is the DMA engine
that performs the memory accesses rather than the I2C controller. Pass
the DMA engine's struct device pointer to the DMA API to make sure the
correct DMA operations are used.
This fixes an issue where the DMA engine's SMMU stream ID needs to be
misleadingly set for the I2C controllers in device tree.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In piix4_probe(), the piix4 adapter will be registered in:
piix4_probe()
piix4_add_adapters_sb800() / piix4_add_adapter()
i2c_add_adapter()
Based on the probed device type, piix4_add_adapters_sb800() or single
piix4_add_adapter() will be called.
For the former case, piix4_adapter_count is set as the number of adapters,
while for antoher case it is not set and kept default *zero*.
When piix4 is removed, piix4_remove() removes the adapters added in
piix4_probe(), basing on the piix4_adapter_count value.
Because the count is zero for the single adapter case, the adapter won't
be removed and makes the sources allocated for adapter leaked, such as
the i2c client and device.
These sources can still be accessed by i2c or bus and cause problems.
An easily reproduced case is that if a new adapter is registered, i2c
will get the leaked adapter and try to call smbus_algorithm, which was
already freed:
Triggered by: rmmod i2c_piix4 && modprobe max31730
BUG: unable to handle page fault for address: ffffffffc053d860
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3752 Comm: modprobe Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core
RSP: 0018:ffff888107477710 EFLAGS: 00000246
...
<TASK>
i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core
__process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core
bus_for_each_dev (drivers/base/bus.c:301)
i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core
i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
</TASK>
---[ end trace 0000000000000000 ]---
Fix this problem by correctly set piix4_adapter_count as 1 for the
single adapter so it can be normally removed.
Fixes: 528d53a159 ("i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This fixes maybe_unused warnings/errors.
According to a comment during device tree removal, only ACPI is supported,
thus let's actually require it.
Fixes: be18c5ede2 ("i2c: mlxbf: remove device tree support")
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for sis630
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When we compile-in the CCI along with the imx412 driver and run on the RB5
we see that i2c_add_adapter() causes the probe of the imx412 driver to
happen.
This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c
fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has
not completed to pm_runtime_enable(dev).
Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding
the i2c adapter.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The missing "platform" alias is required for the mgb4 v4l2 driver to load
the i2c controller driver when probing the HW.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- add a new SoC to the qcom-cci driver
- fix an issue with the designware driver which now got enough testing
- the aspeed driver handles now busy target backends better
-----BEGIN PGP SIGNATURE-----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=zzCf
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- correct a variable type in the new pci1xxxx driver
- add a new SoC to the qcom-cci driver
- fix an issue with the designware driver which now got enough testing
- the aspeed driver now handles busy target backends better
* tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Assert NAK when slave is busy
i2c: designware: Fix handling of real but unexpected device interrupts
i2c: qcom-cci: Add MSM8226 compatible
dt-bindings: i2c: qcom,i2c-cci: Document clocks for MSM8974
dt-bindings: i2c: qcom,i2c-cci: Document MSM8226 compatible
i2c: microchip: pci1xxxx: Fix comparison of -EPERM against an unsigned variable
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=pwnm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
Merge additional APEI changes, ACPI updates related to device wakeup and
system restart and ACPI thermal driver cleanups for 6.1-rc1:
- Fix a memory leak in APEI by avoiding to add do not add task_work to
kernel threads running when an asynchronous error is detected (Shuai
Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
* acpi-apei:
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
* acpi-wakeup:
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
* acpi-reboot:
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
* acpi-thermal:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
On I2C_SLAVE_WRITE_REQUESTED event, Slave already ACK'ed on the address
phase. But as the backend driver is busy and unable to process any
request from Master, issue RxCmdLast for Slave to auto send NACK on
next incoming byte.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit c7b79a7528 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").
I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:
- Issue happens when resuming from S3 but not when resuming from
"s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
system enters into pci_pm_resume_noirq() while all other i2c_designware
PCI devices are in D3. Devices were runtime suspended and in D3 prior
entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
re-enabled
- According to register dump the interrupt really comes from the
i2c_designware.0. Controller is enabled, I2C target address register
points to a one detectable I2C device address 0x60 and the
DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
TX_EMPTY bits are set indicating completed I2C transaction.
My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.
I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).
Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller.
Fixes: c7b79a7528 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs")
Reported-by: Samuel Clark <slc2015@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215907
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add a compatible for MSM8226's Camera Control Interface, which is
similar to the one used on MSM8916.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The comparison of variable ret with -EPERM is always false because
ret is an u8 type. Fix this by making ret an int.
Cleans up clang warning:
drivers/i2c/busses/i2c-mchp-pci1xxxx.c:714:10: warning: result of comparison
of constant -1 with expression of type 'u8' (aka 'unsigned char') is always
false [-Wtautological-constant-out-of-range-compare]
Fixes: 3616936972 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
* new driver for Microchip PCI1xxxx switch
* heavy refactoring of the Mellanox BlueField driver
* we prefer async probe in the i801 driver now
* the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
-----BEGIN PGP SIGNATURE-----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=arni
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
Device tree already has a mechanism to pass the wake_irq. It does this
by looking for the wakeup-source property and setting the
I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
ACPI interrupt wake flag to determine if the interrupt can be used to
wake the system. Previously the i2c drivers had to make assumptions and
blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
If there is a device with an Active Low interrupt and the device gets
powered off while suspending, the interrupt line will go low since it's
no longer powered and wakes the system. For this reason we should
respect the board designers wishes and honor the wake bit defined on the
interrupt.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Reimplement acpi_get_pci_dev() using the list of physical devices
associated with the given ACPI device object (Rafael Wysocki).
- Rename ACPI device object reference counting functions (Rafael
Wysocki).
- Rearrange ACPI device object initialization code (Rafael Wysocki).
- Drop parent field from struct acpi_device (Rafael Wysocki).
- Extend the the int3472-tps68470 driver to support multiple consumers
of a single TPS68470 along with the requisite framework-level
support (Daniel Scally).
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus).
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw).
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus).
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello).
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry).
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen).
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv).
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko).
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello).
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin).
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede).
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner).
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui).
-----BEGIN PGP SIGNATURE-----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=xyUK
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"ACPI and PNP updates for 6.1-rc1.
These rearrange the ACPI device object initialization code (to get rid
of a redundant parent pointer from struct acpi_device among other
things), unify the _UID handling, drop support for some _OSI strings
that should not be necessary any more, add new IDs to support more
hardware and some more quirks, fix a few issues and clean up code all
over.
Specifics:
- Reimplement acpi_get_pci_dev() using the list of physical devices
associated with the given ACPI device object (Rafael Wysocki)
- Rename ACPI device object reference counting functions (Rafael
Wysocki)
- Rearrange ACPI device object initialization code (Rafael Wysocki)
- Drop parent field from struct acpi_device (Rafael Wysocki)
- Extend the the int3472-tps68470 driver to support multiple
consumers of a single TPS68470 along with the requisite
framework-level support (Daniel Scally)
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus)
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw)
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus)
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello)
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry)
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen)
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv)
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko)
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello)
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin)
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede)
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner)
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton)
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan)
- Fix Tx acknowledge in the PCC address space handler (Huisong Li)
- Use wait_for_completion_timeout() for PCC mailbox operations
(Huisong Li)
- Release resources on PCC address space setup failure path (Rafael
Mendonca)
- Remove unneeded result variables from APEI code (ye xingchen)
- Print total number of records found during BERT log parsing (Dmitry
Monakhov)
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello)
- Drop unneeded result variable from ec_write() (ye xingchen)
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver
(Hanjun Guo)
- Reorder symbols to get rid of a few forward declarations in the
ACPI fan driver (Uwe Kleine-König)
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander)
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam)
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki)
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang)
- Do not initialize ret in main() in the pfrut utility (Shi junming)
- Drop useless ACPI DSDT override documentation (Rafael Wysocki)
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare)
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into
an integer value (Andy Shevchenko)
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko)
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui)"
* tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (79 commits)
ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device()
ACPI: LPSS: Replace loop with first entry retrieval
ACPI: x86: s2idle: Add another ID to s2idle_dmi_table
ACPI: x86: s2idle: Fix a NULL pointer dereference
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: docs: Drop useless DSDT override documentation
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13
ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7
ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14
ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE
ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID
ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt
ACPI: x86: s2idle: Move _HID handling for AMD systems into structures
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
...
Some constants need 'UL' markings, otherwise they are shifted into the
sign bit.
Fixes: 3616936972 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch")
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for flexible-array members in unions.
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/218
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This i801 driver probe can take more than ~190ms in some devices, since
the "i2c_register_spd()" call was added inside
"i801_probe_optional_slaves()".
Prefer async probe so that other drivers can be probed and boot can
continue in parallel while this driver loads, to reduce boot time. There is
no reason to block other drivers from probing while this driver is
loading.
Signed-off-by: Mani Milani <mani@chromium.org>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced according to context.
Fixes: 17f88151ff ("i2c: davinci: Add PM Runtime Support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The pattern
foo = kmalloc(sizeof(*foo), GFP_KERNEL);
has an advantage when foo type is changed. Since we are planning a such,
better to be prepared by using standard pattern for memory allocation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The code is ogranized in a way that all related parts
to the certain platform quirk go together. This is not
the case for AMD NAVI. Shuffle code to make it happen.
While at it, drop the frequency definition and use
hard coded value as it's done for other platforms and
add a comment to the PCI ID list.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Microchip pci1xxxx is an unmanaged PCIe3.1a Switch for Consumer,
Industrial and Automotive applications. This switch has multiple
downstream ports. In one of the Switch's Downstream port, there
is a multifunction endpoint for peripherals which includes an I2C
host controller. The I2C function in the endpoint operates at 100KHz,
400KHz and 1 MHz and has buffer depth of 128 bytes.
This patch provides the I2C controller driver for the I2C function
of the switch.
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
BlueField customers have to use the BlueField firmware with
UEFI ACPI tables so there is no need to have device tree
support in the i2c-mlxbf.c driver. Remove the device tree
binding documentation as well.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
BlueField-3 SoC has the same I2C IP logic as previous
BlueField-1 and 2 SoCs but it has different registers' addresses.
This is an effort to keep this driver generic across all
BlueField generations.
This patch breaks down the "smbus" resource into 3 separate
resources to enable us to use common registers' offsets for all
BlueField SoCs:
struct mlxbf_i2c_resource *timer;
struct mlxbf_i2c_resource *mst;
struct mlxbf_i2c_resource *slv;
Of course, all offsets had to be adjusted accordingly, and we took
this chance to reorganize the macros depending on the register block
they target.
There are only 2 registers' offsets that do not fit within this
schema so their offsets are passed as SoC-specific parameters:
smbus_master_rs_bytes_off
smbus_master_fsm_off
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Hook up the standard GPIO/pinctrl-based recovery support.
We are doing the recovery at the beginning on a timeout.
Multiple people have contributed to the series.
Original patch from Cirag and another one from Robert.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Support the multi slave functionality which enables the BlueField
to be registered at up to 16 i2c slave addresses.
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linux is not the only entity using the BlueField I2C busses so
support a lock mechanism provided by hardware to avoid issues
when multiple entities are trying to access the same bus.
The lock is acquired whenever written explicitely or the lock
register is read. So make sure it is always released at the end
of a successful or failed transaction.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A couple years back we went through the kernel an automatically
converted size calculations to use struct_size() instead. The
struct_size() calculation is protected against integer overflows.
However it does not make sense to use the result from struct_size()
for additional math operations as that would negate any safeness.
Fixes: 1f3b69b6b9 ("i2c: mux: Use struct_size() in devm_kzalloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c-mlxbf.c driver is currently broken because there is a bug
in the calculation of the frequency. core_f, core_r and core_od
are components read from hardware registers and are used to
compute the frequency used to compute different timing parameters.
The shifting mechanism used to get core_f, core_r and core_od is
wrong. Use FIELD_GET to mask and shift the bitfields properly.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
ACPI utils provide acpi_dev_uid_to_integer() helper to extract _UID as
an integer. Use it instead of custom approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI utils provide acpi_dev_uid_to_integer() helper to extract _UID as
an integer. Use it instead of custom approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
IRQF_ONESHOT is not needed so remove it.
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
memcpy() is called in a loop while 'operation->length' upper bound
is not checked and 'data_idx' also increments.
Fixes: b5b5b32081 ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Correct the base address used during io write.
This bug had no impact over the overall functionality of the read and write
transactions. MLXBF_I2C_CAUSE_OR_CLEAR=0x18 so writing to (smbus->io + 0x18)
instead of (mst_cause->ioi + 0x18) actually writes to the sc_low_timeout
register which just sets the timeout value before a read/write aborts.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Enable support for GPCDMA, which is used in I2C controllers
in Tegra 186 and above. The chips before that used APB DMA.
This change works under the presumption that all chips apart from
those supporting APB DMA is using GPCDMA.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
ACPI core in conjunction with platform driver core provides
an infrastructure to enumerate ACPI devices. Use it in order
to remove a lot of boilerplate code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Josef Johansson <josef@oderland.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
pm_runtime_get_sync() returning 1 also means the device is powered. So
resetting the chip registers in .remove() is possible and should be
done.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d98bdd3a5b ("i2c: imx: Make sure to unregister adapter on remove()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add i2c support for Rockchip RV1126 SoC.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
6.1, please pull the following:
- Guilherme adds a comment to the panic notifier, part of his big panic
notifier rework series
- William migrates all of ARCH_BCM4908 dependencies to ARCH_BCMBCA
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmMfeckACgkQh9CWnEQH
BwQF9xAAr2z5G9EJkfWr13eTv6E1gvTXM96ljPt7yayVbmQeZOfR18Fl8orB+WtN
YqkCIJ7eKRRevlPnrCLr4UghhFsHJABX1Oj8JdUtSJlQ5Gw5yqNGkJLipPSSQWoQ
mxeOzyoZCXx6K7aiXeqQtV4OWGLmMJ/c7j6DDXpyqxY7vL4R5yURZRvi1/1lp9U2
0kw9VPpmr51j0HdoM+esftKwR2lZdimYChCjp4MbBcMeMUWU4pDsOaxQmZCyl0w5
F+OONd8YAUiyaxJVNgG/YQmJKKY8gZVriMo7tlt6U92jXxfPzuPFyj0Bnvb0GS8L
h43uHcKCK7TRIkZknMPD+eNa0mOOkEbGTpO4uAwMCVQgKDCimaUQSk/shfe0jPo6
4PWpkdOC8cpT7kfNr4erY/CVwzlsqb7L+2STnBQirJiAv+aR17g4zsp/CKHLe7GS
2QEW7e75rb4RSeMv/bREAOkndndfMSWqkrXRiiLEy8dq7dp7V7mlFBNNejcomPj2
O3COArbQUvpk+BTNs316PRm9PAJofYlgka1LysO527xOzKQEVG1O6GdaMRURvWnh
MOoyzxd5lePvsudXjCsT7NXWwlwtByWmctTTbRr8jaMqL63OEOWymXOpt6FurNHI
XcbumAh0LIMBiyAJpgpo0X9vbty0PLoFZSbtR6Jjmh2JmKXu2s8=
=eiuT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7IUk
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoC drivers updates for
6.1, please pull the following:
- Guilherme adds a comment to the panic notifier, part of his big panic
notifier rework series
- William migrates all of ARCH_BCM4908 dependencies to ARCH_BCMBCA
* tag 'arm-soc/for-6.1/drivers' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
soc: bcm: brcmstb: Document panic notifier action and remove useless header
Link: https://lore.kernel.org/r/20220915023044.2350782-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
