fscrypt_initialize() is a "one-time init" function that is called
whenever the key is set up for any inode on any filesystem. Make it
implement "one-time init" more efficiently by not taking a global mutex
in the "already initialized case" and doing fewer pointer dereferences.
Link: https://lore.kernel.org/r/20230406181245.36091-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
This patch introduces a new helper function which can be used both in
lookups and in atomic_open operations by filesystems that want to handle
filename encryption and no-key dentries themselves.
The reason for this function to be used in atomic open is that this
operation can act as a lookup if handed a dentry that is negative. And in
this case we may need to set DCACHE_NOKEY_NAME.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Tested-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
[ebiggers: improved the function comment, and moved the function to just
below __fscrypt_prepare_lookup()]
Link: https://lore.kernel.org/r/20230320220149.21863-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
It is a bug for fscrypt_put_master_key_activeref() to see a NULL
keyring. But it used to be possible due to the bug, now fixed, where
fscrypt_destroy_keyring() was called before security_sb_delete(). To be
consistent with how fscrypt_destroy_keyring() uses WARN_ON for the same
issue, WARN and leak the fscrypt_master_key if the keyring is NULL
instead of dereferencing the NULL pointer.
This is a robustness improvement, not a fix.
Link: https://lore.kernel.org/r/20230313221231.272498-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal. Specifically, add support for Merkle tree
block sizes less than PAGE_SIZE, and make ext4 support fsverity on
filesystems where the filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting data
from large folios, which I'm including in this pull request to avoid a
merge conflict between the fscrypt and fsverity branches.
There will be a merge conflict in fs/buffer.c with some of the foliation
work in the mm tree. Please use the merge resolution from linux-next.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY/KJtRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/A/AP0RUlCClBRuHwXPRG0we8R1L153ga4s
Vl+xRpCr+SswXwEAiOEpYN5cXoVKzNgxbEXo2pQzxi5lrpjZgUI6CL3DuQs=
=ZRFX
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal.
Specifically, add support for Merkle tree block sizes less than
PAGE_SIZE, and make ext4 support fsverity on filesystems where the
filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code
paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting
data from large folios, which I'm including in here to avoid a merge
conflict between the fscrypt and fsverity branches"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fscrypt: support decrypting data from large folios
fsverity: support verifying data from large folios
fsverity.rst: update git repo URL for fsverity-utils
ext4: allow verity with fs block size < PAGE_SIZE
fs/buffer.c: support fsverity in block_read_full_folio()
f2fs: simplify f2fs_readpage_limit()
ext4: simplify ext4_readpage_limit()
fsverity: support enabling with tree block size < PAGE_SIZE
fsverity: support verification with tree block size < PAGE_SIZE
fsverity: replace fsverity_hash_page() with fsverity_hash_block()
fsverity: use EFBIG for file too large to enable verity
fsverity: store log2(digest_size) precomputed
fsverity: simplify Merkle tree readahead size calculation
fsverity: use unsigned long for level_start
fsverity: remove debug messages and CONFIG_FS_VERITY_DEBUG
fsverity: pass pos and size to ->write_merkle_tree_block
fsverity: optimize fsverity_cleanup_inode() on non-verity files
fsverity: optimize fsverity_prepare_setattr() on non-verity files
fsverity: optimize fsverity_file_open() on non-verity files
Simplify the implementation of the test_dummy_encryption mount option by
adding the "test dummy key" on-demand.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY/J7NRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3UVAP9Likiuy47D/RM4mOsPMwLAlQRx5uW6
iGxT6DutekA7DwEA4hNjEQQ/EKO+UxFb+fBCX+xpTDbS3LB7CxGsqHzZJQM=
=SiNJ
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
"Simplify the implementation of the test_dummy_encryption mount option
by adding the 'test dummy key' on-demand"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: clean up fscrypt_add_test_dummy_key()
fs/super.c: stop calling fscrypt_destroy_keyring() from __put_super()
f2fs: stop calling fscrypt_add_test_dummy_key()
ext4: stop calling fscrypt_add_test_dummy_key()
fscrypt: add the test dummy encryption key on-demand
Now that fscrypt_add_test_dummy_key() is only called by
setup_file_encryption_key() and not by the individual filesystems,
un-export it. Also change its prototype to take the
fscrypt_key_specifier directly, as the caller already has it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-6-ebiggers@kernel.org
When the key for an inode is not found but the inode is using the
test_dummy_encryption policy, automatically add the
test_dummy_encryption key to the filesystem keyring. This eliminates
the need for all the individual filesystems to do this at mount time,
which is a bit tricky to clean up from on failure.
Note: this covers the call to fscrypt_find_master_key() from inode key
setup, but not from the fscrypt ioctls. So, this isn't *exactly* the
same as the key being present from the very beginning. I think we can
tolerate that, though, since the inode key setup caller is the only one
that actually matters in the context of test_dummy_encryption.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-2-ebiggers@kernel.org
Try to make the filesystem-level decryption functions in fs/crypto/
aware of large folios. This includes making fscrypt_decrypt_bio()
support the case where the bio contains large folios, and making
fscrypt_decrypt_pagecache_blocks() take a folio instead of a page.
There's no way to actually test this with large folios yet, but I've
tested that this doesn't cause any regressions.
Note that this patch just handles *decryption*, not encryption which
will be a little more difficult.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230127224202.355629-1-ebiggers@kernel.org
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k/vv
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
Add support for XTS and CTS mode variant of SM4 algorithm. The former is
used to encrypt file contents, while the latter (SM4-CTS-CBC) is used to
encrypt filenames.
SM4 is a symmetric algorithm widely used in China, and is even mandatory
algorithm in some special scenarios. We need to provide these users with
the ability to encrypt files or disks using SM4-XTS.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221201125819.36932-3-tianjia.zhang@linux.alibaba.com
Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue. With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit d7e7b9af10 ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key") moved the keyring destruction from __put_super() to
generic_shutdown_super() so that the filesystem's block device(s) are
still available. Unfortunately, this causes a memory leak in the case
where a mount is attempted with the test_dummy_encryption mount option,
but the mount fails after the option has already been processed.
To fix this, attempt the keyring destruction in both places.
Reported-by: syzbot+104c2a89561289cec13e@syzkaller.appspotmail.com
Fixes: d7e7b9af10 ("fscrypt: stop using keyrings subsystem for fscrypt_master_key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20221011213838.209879-1-ebiggers@kernel.org
Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment restrictions.
Specifically, STATX_DIOALIGN works on block devices, and on regular
files when their containing filesystem has implemented support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can be
affected by various filesystem features such as multi-device support,
data journalling, inline data, encryption, verity, compression,
checkpoint disabling, log-structured mode, etc. Further complicating
things, Linux v6.0 relaxed the traditional rule of DIO needing to be
aligned to the block device's logical block size; now user buffers (but
not file offsets) only need to be aligned to the DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page update
https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpV2xQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKwF1AQDetPX5hyuq0/mwikOywLTTJsoHgGY5
euO+dISqjH/InwD9HAQqfPRkdM1j4ml82BjjkAfrhzZXOOWPKJm0zOhMIQg=
=0Oav
-----END PGP SIGNATURE-----
Merge tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull STATX_DIOALIGN support from Eric Biggers:
"Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment
restrictions. Specifically, STATX_DIOALIGN works on block devices, and
on regular files when their containing filesystem has implemented
support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can
be affected by various filesystem features such as multi-device
support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode, etc.
Further complicating things, Linux v6.0 relaxed the traditional rule
of DIO needing to be aligned to the block device's logical block size;
now user buffers (but not file offsets) only need to be aligned to the
DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page
update[1]"
Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1]
* tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
xfs: support STATX_DIOALIGN
f2fs: support STATX_DIOALIGN
f2fs: simplify f2fs_force_buffered_io()
f2fs: move f2fs_force_buffered_io() into file.c
ext4: support STATX_DIOALIGN
fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN
vfs: support STATX_DIOALIGN on block devices
statx: add direct I/O alignment information
request_queues are a block layer implementation detail that should not
leak into file systems. Change the fscrypt inline crypto code to
retrieve block devices instead of request_queues from the file system.
As part of that, clean up the interaction with multi-device file systems
by returning both the number of devices and the actual device array in a
single method call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ebiggers: bug fixes and minor tweaks]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220901193208.138056-4-ebiggers@kernel.org
Now that the fscrypt_master_key lifetime has been reworked to not be
subject to the quirks of the keyrings subsystem, blk_crypto_evict_key()
no longer gets called after the filesystem has already been unmounted.
Therefore, there is no longer any need to hold extra references to the
filesystem's request_queue(s). (And these references didn't always do
their intended job anyway, as pinning a request_queue doesn't
necessarily pin the corresponding blk_crypto_profile.)
Stop taking these extra references. Instead, just pass the super_block
to fscrypt_destroy_inline_crypt_key(), and use it to get the list of
block devices the key needs to be evicted from.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220901193208.138056-3-ebiggers@kernel.org
The approach of fs/crypto/ internally managing the fscrypt_master_key
structs as the payloads of "struct key" objects contained in a
"struct key" keyring has outlived its usefulness. The original idea was
to simplify the code by reusing code from the keyrings subsystem.
However, several issues have arisen that can't easily be resolved:
- When a master key struct is destroyed, blk_crypto_evict_key() must be
called on any per-mode keys embedded in it. (This started being the
case when inline encryption support was added.) Yet, the keyrings
subsystem can arbitrarily delay the destruction of keys, even past the
time the filesystem was unmounted. Therefore, currently there is no
easy way to call blk_crypto_evict_key() when a master key is
destroyed. Currently, this is worked around by holding an extra
reference to the filesystem's request_queue(s). But it was overlooked
that the request_queue reference is *not* guaranteed to pin the
corresponding blk_crypto_profile too; for device-mapper devices that
support inline crypto, it doesn't. This can cause a use-after-free.
- When the last inode that was using an incompletely-removed master key
is evicted, the master key removal is completed by removing the key
struct from the keyring. Currently this is done via key_invalidate().
Yet, key_invalidate() takes the key semaphore. This can deadlock when
called from the shrinker, since in fscrypt_ioctl_add_key(), memory is
allocated with GFP_KERNEL under the same semaphore.
- More generally, the fact that the keyrings subsystem can arbitrarily
delay the destruction of keys (via garbage collection delay, or via
random processes getting temporary key references) is undesirable, as
it means we can't strictly guarantee that all secrets are ever wiped.
- Doing the master key lookups via the keyrings subsystem results in the
key_permission LSM hook being called. fscrypt doesn't want this, as
all access control for encrypted files is designed to happen via the
files themselves, like any other files. The workaround which SELinux
users are using is to change their SELinux policy to grant key search
access to all domains. This works, but it is an odd extra step that
shouldn't really have to be done.
The fix for all these issues is to change the implementation to what I
should have done originally: don't use the keyrings subsystem to keep
track of the filesystem's fscrypt_master_key structs. Instead, just
store them in a regular kernel data structure, and rework the reference
counting, locking, and lifetime accordingly. Retain support for
RCU-mode key lookups by using a hash table. Replace fscrypt_sb_free()
with fscrypt_sb_delete(), which releases the keys synchronously and runs
a bit earlier during unmount, so that block devices are still available.
A side effect of this patch is that neither the master keys themselves
nor the filesystem keyrings will be listed in /proc/keys anymore.
("Master key users" and the master key users keyrings will still be
listed.) However, this was mostly an implementation detail, and it was
intended just for debugging purposes. I don't know of anyone using it.
This patch does *not* change how "master key users" (->mk_users) works;
that still uses the keyrings subsystem. That is still needed for key
quotas, and changing that isn't necessary to solve the issues listed
above. If we decide to change that too, it would be a separate patch.
I've marked this as fixing the original commit that added the fscrypt
keyring, but as noted above the most important issue that this patch
fixes wasn't introduced until the addition of inline encryption support.
Fixes: 22d94f493b ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220901193208.138056-2-ebiggers@kernel.org
To prepare for STATX_DIOALIGN support, make two changes to
fscrypt_dio_supported().
First, remove the filesystem-block-alignment check and make the
filesystems handle it instead. It previously made sense to have it in
fs/crypto/; however, to support STATX_DIOALIGN the alignment restriction
would have to be returned to filesystems. It ends up being simpler if
filesystems handle this part themselves, especially for f2fs which only
allows fs-block-aligned DIO in the first place.
Second, make fscrypt_dio_supported() work on inodes whose encryption key
hasn't been set up yet, by making it set up the key if needed. This is
required for statx(), since statx() doesn't require a file descriptor.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-4-ebiggers@kernel.org
As a step towards freeing the PG_error flag for other uses, change ext4
and f2fs to stop using PG_error to track decryption errors. Instead, if
a decryption error occurs, just mark the whole bio as failed. The
coarser granularity isn't really a problem since it isn't any worse than
what the block layer provides, and errors from a multi-page readahead
aren't reported to applications unless a single-page read fails too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org> # for f2fs part
Link: https://lore.kernel.org/r/20220815235052.86545-2-ebiggers@kernel.org
Now that all its callers have been converted to
fscrypt_parse_test_dummy_encryption() and fscrypt_add_test_dummy_key()
instead, fscrypt_set_test_dummy_encryption() can be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220513231605.175121-6-ebiggers@kernel.org
Luis and others, almost exclusively in the filesystem. Several patches
touch files outside of our normal purview to set the stage for bringing
in Jeff's long awaited ceph+fscrypt series in the near future. All of
them have appropriate acks and sat in linux-next for a while.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmL1HF8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziwOuB/97JKHFuOlP1HrD6fYe5a0ul9zC9VG4
57XPDNqG2PSmfXCjvZhyVU4n53sUlJTqzKDSTXydoPCMQjtyHvysA6gEvcgUJFPd
PHaZDCd9TmqX8my67NiTK70RVpNR9BujJMVMbOfM+aaisl0K6WQbitO+BfhEiJcK
QStdKm5lPyf02ESH9jF+Ga0DpokARaLbtDFH7975owxske6gWuoPBCJNrkMooKiX
LjgEmNgH1F/sJSZXftmKdlw9DtGBFaLQBdfbfSB5oVPRb7chI7xBeraNr6Od3rls
o4davbFkcsOr+s6LJPDH2BJobmOg+HoMoma7ezspF7ZqBF4Uipv5j3VC
=1427
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
Most filesystems just call fscrypt_set_context on new inodes, which
usually causes a setxattr. That's a bit late for ceph, which can send
along a full set of attributes with the create request.
Doing so allows it to avoid race windows that where the new inode could
be seen by other clients without the crypto context attached. It also
avoids the separate round trip to the server.
Refactor the fscrypt code a bit to allow us to create a new crypto
context, attach it to the inode, and write it to the buffer, but without
calling set_context on it. ceph can later use this to marshal the
context into the attributes we send along with the create request.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For ceph, we want to use our own scheme for handling filenames that are
are longer than NAME_MAX after encryption and Base64 encoding. This
allows us to have a consistent view of the encrypted filenames for
clients that don't support fscrypt and clients that do but that don't
have the key.
Currently, fs/crypto only supports encrypting filenames using
fscrypt_setup_filename, but that also handles encoding nokey names. Ceph
can't use that because it handles nokey names in a different way.
Export fscrypt_fname_encrypt. Rename fscrypt_fname_encrypted_size to
__fscrypt_fname_encrypted_size and add a new wrapper called
fscrypt_fname_encrypted_size that takes an inode argument rather than a
pointer to a fscrypt_policy union.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
HCTR2 is a tweakable, length-preserving encryption mode that is intended
for use on CPUs with dedicated crypto instructions. HCTR2 has the
property that a bitflip in the plaintext changes the entire ciphertext.
This property fixes a known weakness with filename encryption: when two
filenames in the same directory share a prefix of >= 16 bytes, with
AES-CTS-CBC their encrypted filenames share a common substring, leaking
information. HCTR2 does not have this problem.
More information on HCTR2 can be found here: "Length-preserving
encryption with HCTR2": https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unfortunately the design of fscrypt_set_test_dummy_encryption() doesn't
work properly for the new mount API, as it combines too many steps into
one function:
- Parse the argument to test_dummy_encryption
- Check the setting against the filesystem instance
- Apply the setting to the filesystem instance
The new mount API has split these into separate steps. ext4 partially
worked around this by duplicating some of the logic, but it still had
some bugs. To address this, add some new helper functions that split up
the steps of fscrypt_set_test_dummy_encryption():
- fscrypt_parse_test_dummy_encryption()
- fscrypt_dummy_policies_equal()
- fscrypt_add_test_dummy_key()
While we're add it, also add a function fscrypt_is_dummy_policy_set()
which will be useful to avoid some #ifdef's.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220501050857.538984-5-ebiggers@kernel.org
Factor out a function that builds the fscrypt_key_specifier for an
fscrypt_policy. Before this was only needed when finding the key for a
file, but now it will also be needed for test_dummy_encryption support.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220501050857.538984-4-ebiggers@kernel.org
When inline encryption is used, the usual message "fscrypt: AES-256-XTS
using implementation <impl>" doesn't appear in the kernel log. Add a
similar message for the blk-crypto case that indicates that inline
encryption was used, and whether blk-crypto-fallback was used or not.
This can be useful for debugging performance problems.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220414053415.158986-1-ebiggers@kernel.org
FS_CRYPTO_BLOCK_SIZE is neither the filesystem block size nor the
granularity of encryption. Rather, it defines two logically separate
constraints that both arise from the block size of the AES cipher:
- The alignment required for the lengths of file contents blocks
- The minimum input/output length for the filenames encryption modes
Since there are way too many things called the "block size", and the
connection with the AES block size is not easily understood, split
FS_CRYPTO_BLOCK_SIZE into two constants FSCRYPT_CONTENTS_ALIGNMENT and
FSCRYPT_FNAME_MIN_MSG_LEN that more clearly describe what they are.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220405010914.18519-1-ebiggers@kernel.org
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Add support for direct I/O on encrypted files when blk-crypto (inline
encryption) is being used for file contents encryption.
There will be a merge conflict with the block pull request in
fs/iomap/direct-io.c, due to some bio interface cleanups. The merge
resolution is straightforward and can be found in linux-next.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYjgCfhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK6vjAQDp8D8OKIyj67KjYwvyHpNy0fZhxeur
RexC0nDfd9BE/AD/fV6zpCglmsuGxqxL0jmqeczKXn2y7nRFmPciCBTi/wY=
=kwNd
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Add support for direct I/O on encrypted files when blk-crypto (inline
encryption) is being used for file contents encryption"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: update documentation for direct I/O support
f2fs: support direct I/O with fscrypt using blk-crypto
ext4: support direct I/O with fscrypt using blk-crypto
iomap: support direct I/O with fscrypt using blk-crypto
fscrypt: add functions for direct I/O support
Encrypted files traditionally haven't supported DIO, due to the need to
encrypt/decrypt the data. However, when the encryption is implemented
using inline encryption (blk-crypto) instead of the traditional
filesystem-layer encryption, it is straightforward to support DIO.
In preparation for supporting this, add the following functions:
- fscrypt_dio_supported() checks whether a DIO request is supported as
far as encryption is concerned. Encrypted files will only support DIO
when inline encryption is used and the I/O request is properly
aligned; this function checks these preconditions.
- fscrypt_limit_io_blocks() limits the length of a bio to avoid crossing
a place in the file that a bio with an encryption context cannot
cross due to a DUN discontiguity. This function is needed by
filesystems that use the iomap DIO implementation (which operates
directly on logical ranges, so it won't use fscrypt_mergeable_bio())
and that support FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220128233940.79464-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Pass the block_device that we plan to use this bio for and the
operation to bio_reset to optimize the assigment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fscrypt currently requires a 512-bit master key when AES-256-XTS is
used, since AES-256-XTS keys are 512-bit and fscrypt requires that the
master key be at least as long any key that will be derived from it.
However, this is overly strict because AES-256-XTS doesn't actually have
a 512-bit security strength, but rather 256-bit. The fact that XTS
takes twice the expected key size is a quirk of the XTS mode. It is
sufficient to use 256 bits of entropy for AES-256-XTS, provided that it
is first properly expanded into a 512-bit key, which HKDF-SHA512 does.
Therefore, relax the check of the master key size to use the security
strength of the derived key rather than the size of the derived key
(except for v1 encryption policies, which don't use HKDF).
Besides making things more flexible for userspace, this is needed in
order for the use of a KDF which only takes a 256-bit key to be
introduced into the fscrypt key hierarchy. This will happen with
hardware-wrapped keys support, as all known hardware which supports that
feature uses an SP800-108 KDF using AES-256-CMAC, so the wrapped keys
are wrapped 256-bit AES keys. Moreover, there is interest in fscrypt
supporting the same type of AES-256-CMAC based KDF in software as an
alternative to HKDF-SHA512. There is no security problem with such
features, so fix the key length check to work properly with them.
Reviewed-by: Paul Crowley <paulcrowley@google.com>
Link: https://lore.kernel.org/r/20210921030303.5598-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The file comment in bio.c is almost completely irrelevant to the actual
contents of the file; it was originally copied from crypto.c. Fix it
up, and also add a kerneldoc comment for fscrypt_decrypt_bio().
Link: https://lore.kernel.org/r/20210909190737.140841-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The max_namelen field is unnecessary, as it is set to 255 (NAME_MAX) on
all filesystems that support fscrypt (or plan to support fscrypt). For
simplicity, just use NAME_MAX directly instead.
Link: https://lore.kernel.org/r/20210909184513.139281-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fscrypt uses a Base64 encoding to encode no-key filenames (the filenames
that are presented to userspace when a directory is listed without its
encryption key). There are many variants of Base64, but the most common
ones are specified by RFC 4648. fscrypt can't use the regular RFC 4648
"base64" variant because "base64" uses the '/' character, which isn't
allowed in filenames. However, RFC 4648 also specifies a "base64url"
variant for use in URLs and filenames. "base64url" is less common than
"base64", but it's still implemented in many programming libraries.
Unfortunately, what fscrypt actually uses is a custom Base64 variant
that differs from "base64url" in several ways:
- The binary data is divided into 6-bit chunks differently.
- Values 62 and 63 are encoded with '+' and ',' instead of '-' and '_'.
- '='-padding isn't used. This isn't a problem per se, as the padding
isn't technically necessary, and RFC 4648 doesn't strictly require it.
But it needs to be properly documented.
There have been two attempts to copy the fscrypt Base64 code into lib/
(https://lkml.kernel.org/r/20200821182813.52570-6-jlayton@kernel.org and
https://lkml.kernel.org/r/20210716110428.9727-5-hare@suse.de), and both
have been caught up by the fscrypt Base64 variant being nonstandard and
not properly documented. Also, the planned use of the fscrypt Base64
code in the CephFS storage back-end will prevent it from being changed
later (whereas currently it can still be changed), so we need to choose
an encoding that we're happy with before it's too late.
Therefore, switch the fscrypt Base64 variant to base64url, in order to
align more closely with RFC 4648 and other implementations and uses of
Base64. However, I opted not to implement '='-padding, as '='-padding
adds complexity, is unnecessary, and isn't required by the RFC.
Link: https://lore.kernel.org/r/20210718000125.59701-1-ebiggers@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add a helper function fscrypt_symlink_getattr() which will be called
from the various filesystems' ->getattr() methods to read and decrypt
the target of encrypted symlinks in order to report the correct st_size.
Detailed explanation:
As required by POSIX and as documented in various man pages, st_size for
a symlink is supposed to be the length of the symlink target.
Unfortunately, st_size has always been wrong for encrypted symlinks
because st_size is populated from i_size from disk, which intentionally
contains the length of the encrypted symlink target. That's slightly
greater than the length of the decrypted symlink target (which is the
symlink target that userspace usually sees), and usually won't match the
length of the no-key encoded symlink target either.
This hadn't been fixed yet because reporting the correct st_size would
require reading the symlink target from disk and decrypting or encoding
it, which historically has been considered too heavyweight to do in
->getattr(). Also historically, the wrong st_size had only broken a
test (LTP lstat03) and there were no known complaints from real users.
(This is probably because the st_size of symlinks isn't used too often,
and when it is, typically it's for a hint for what buffer size to pass
to readlink() -- which a slightly-too-large size still works for.)
However, a couple things have changed now. First, there have recently
been complaints about the current behavior from real users:
- Breakage in rpmbuild:
https://github.com/rpm-software-management/rpm/issues/1682https://github.com/google/fscrypt/issues/305
- Breakage in toybox cpio:
https://www.mail-archive.com/toybox@lists.landley.net/msg07193.html
- Breakage in libgit2: https://issuetracker.google.com/issues/189629152
(on Android public issue tracker, requires login)
Second, we now cache decrypted symlink targets in ->i_link. Therefore,
taking the performance hit of reading and decrypting the symlink target
in ->getattr() wouldn't be as big a deal as it used to be, since usually
it will just save having to do the same thing later.
Also note that eCryptfs ended up having to read and decrypt symlink
targets in ->getattr() as well, to fix this same issue; see
commit 3a60a1686f ("eCryptfs: Decrypt symlink target for stat size").
So, let's just bite the bullet, and read and decrypt the symlink target
in ->getattr() in order to report the correct st_size. Add a function
fscrypt_symlink_getattr() which the filesystems will call to do this.
(Alternatively, we could store the decrypted size of symlinks on-disk.
But there isn't a great place to do so, and encryption is meant to hide
the original size to some extent; that property would be lost.)
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Typically, the cryptographic APIs that fscrypt uses take keys as byte
arrays, which avoids endianness issues. However, siphash_key_t is an
exception. It is defined as 'u64 key[2];', i.e. the 128-bit key is
expected to be given directly as two 64-bit words in CPU endianness.
fscrypt_derive_dirhash_key() and fscrypt_setup_iv_ino_lblk_32_key()
forgot to take this into account. Therefore, the SipHash keys used to
index encrypted+casefolded directories differ on big endian vs. little
endian platforms, as do the SipHash keys used to hash inode numbers for
IV_INO_LBLK_32-encrypted directories. This makes such directories
non-portable between these platforms.
Fix this by always using the little endian order. This is a breaking
change for big endian platforms, but this should be fine in practice
since these features (encrypt+casefold support, and the IV_INO_LBLK_32
flag) aren't known to actually be used on any big endian platforms yet.
Fixes: aa408f835d ("fscrypt: derive dirhash key for casefolded directories")
Fixes: e3b1078bed ("fscrypt: add support for IV_INO_LBLK_32 policies")
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://lore.kernel.org/r/20210605075033.54424-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
When initializing a no-key name, fscrypt_fname_disk_to_usr() sets the
minor_hash to 0 if the (major) hash is 0.
This doesn't make sense because 0 is a valid hash code, so we shouldn't
ignore the filesystem-provided minor_hash in that case. Fix this by
removing the special case for 'hash == 0'.
This is an old bug that appears to have originated when the encryption
code in ext4 and f2fs was moved into fs/crypto/. The original ext4 and
f2fs code passed the hash by pointer instead of by value. So
'if (hash)' actually made sense then, as it was checking whether a
pointer was NULL. But now the hashes are passed by value, and
filesystems just pass 0 for any hashes they don't have. There is no
need to handle this any differently from the hashes actually being 0.
It is difficult to reproduce this bug, as it only made a difference in
the case where a filename's 32-bit major hash happened to be 0.
However, it probably had the largest chance of causing problems on
ubifs, since ubifs uses minor_hash to do lookups of no-key names, in
addition to using it as a readdir cookie. ext4 only uses minor_hash as
a readdir cookie, and f2fs doesn't use minor_hash at all.
Fixes: 0b81d07790 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto")
Cc: <stable@vger.kernel.org> # v4.6+
Link: https://lore.kernel.org/r/20210527235236.2376556-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
Even if FS encryption has strict functional dependencies on various
crypto algorithms and chaining modes. those dependencies could potentially
be satisified by other implementations than the generic ones, and no link
time dependency exists on the 'depends on' claused defined by
CONFIG_FS_ENCRYPTION_ALGS.
So let's relax these clauses to 'imply', so that the default behavior
is still to pull in those generic algorithms, but in a way that permits
them to be disabled again in Kconfig.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
