Commit Graph

52 Commits

Author SHA1 Message Date
Tony Luck
4c5717da1d x86/mce: Check for alternate indication of machine check recovery on Skylake
Currently we just check the "CAPID0" register to see whether the CPU
can recover from machine checks.

But there are also some special SKUs which do not have all advanced
RAS features, but do enable machine check recovery for use with NVDIMMs.

Add a check for any of bits {8:5} in the "CAPID5" register (each
reports some NVDIMM mode available, if any of them are set, then
the system supports memory machine check recovery).

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org # 4.9
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/03cbed6e99ddafb51c2eadf9a3b7c8d7a0cc204e.1527283897.git.tony.luck@intel.com
2018-06-07 22:22:12 +02:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Lukas Wunner
630b3aff8a treewide: Consolidate Apple DMI checks
We're about to amend ACPI bus scan with DMI checks whether we're running
on a Mac to support Apple device properties in AML.  The DMI checks are
performed for every single device, adding overhead for everything x86
that isn't Apple, which is the majority.  Rafael and Andy therefore
request to perform the DMI match only once and cache the result.

Outside of ACPI various other Apple DMI checks exist and it seems
reasonable to use the cached value there as well.  Rafael, Andy and
Darren suggest performing the DMI check in arch code and making it
available with a header in include/linux/platform_data/x86/.

To this end, add early_platform_quirks() to arch/x86/kernel/quirks.c
to perform the DMI check and invoke it from setup_arch().  Switch over
all existing Apple DMI checks, thereby fixing two deficiencies:

* They are now #defined to false on non-x86 arches and can thus be
  optimized away if they're located in cross-arch code.

* Some of them only match "Apple Inc." but not "Apple Computer, Inc.",
  which is used by BIOSes released between January 2006 (when the first
  x86 Macs started shipping) and January 2007 (when the company name
  changed upon introduction of the iPhone).

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suggested-by: Darren Hart <dvhart@infradead.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-03 23:26:22 +02:00
Arnd Bergmann
d320b9a5bd x86/quirks: Hide maybe-uninitialized warning
gcc -Wmaybe-uninitialized detects that quirk_intel_brickland_xeon_ras_cap
uses uninitialized data when CONFIG_PCI is not set:

  arch/x86/kernel/quirks.c: In function ‘quirk_intel_brickland_xeon_ras_cap’:
  arch/x86/kernel/quirks.c:641:13: error: ‘capid0’ is used uninitialized in this function [-Werror=uninitialized]

However, the function is also not called in this configuration, so we
can avoid the warning by moving the existing #ifdef to cover it as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/20161024153325.2752428-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 11:45:13 +02:00
Tony Luck
3637efb008 x86/mce: Add PCI quirks to identify Xeons with machine check recovery
Each Xeon includes a number of capability registers in PCI space that
describe some features not enumerated by CPUID.

Use these to determine that we are running on a model that can recover from
machine checks. Hooks for Ivybridge ... Skylake provided.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Boris Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/abf331dc4a3e2a2d17444129bc51127437bcf4ba.1472754711.git.tony.luck@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-05 11:47:31 +02:00
Jan Beulich
3d45ac4b35 timers/x86/hpet: Type adjustments
Standardize on bool instead of an inconsistent mixture of u8 and plain 'int'.

Also use u32 or 'unsigned int' instead of 'unsigned long' when a 32-bit type
suffices, generating slightly better code on x86-64.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5624E3A002000078000AC49A@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-21 11:17:32 +02:00
Peter Neubauer
2e151c70df x86: HPET force enable for e6xx based systems
As the Soekris net6501 and other e6xx based systems do not have
any ACPI implementation, HPET won't get enabled.
This patch enables HPET on such platforms.

[    0.430149] pci 0000:00:01.0: Force enabled HPET at 0xfed00000
[    0.644838] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

Original patch by Peter Neubauer (http://www.mail-archive.com/soekris-tech@lists.soekris.com/msg06462.html)
slightly modified by Conrad Kostecki <ck@conrad-kostecki.de> and massaged
accoring to Thomas Gleixners <tglx@linutronix.de> by me.

Suggested-by: Conrad Kostecki <ck@conrad-kostecki.de>
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Cc: Peter Neubauer <pneubauer@bluerwhite.org>
Link: http://lkml.kernel.org/r/5412D3A5.2030909@lsexperts.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-09-15 17:53:35 -07:00
Daniel J Blueman
847d7970de x86/amd/numa: Fix northbridge quirk to assign correct NUMA node
For systems with multiple servers and routed fabric, all
northbridges get assigned to the first server. Fix this by also
using the node reported from the PCI bus. For single-fabric
systems, the northbriges are on PCI bus 0 by definition, which
are on NUMA node 0 by definition, so this is invarient on most
systems.

Tested on fam10h and fam15h single and multi-fabric systems and
candidate for stable.

Signed-off-by: Daniel J Blueman <daniel@numascale.com>
Acked-by: Steffen Persvold <sp@numascale.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1394710981-3596-1-git-send-email-daniel@numascale.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-14 11:05:36 +01:00
Aravind Gopalakrishnan
fb53a1ab88 x86/quirks: Add workaround for AMD F16h Erratum792
The workaround for this Erratum is included in AGESA. But BIOSes
spun only after Jan2014 will have the fix (atleast server
versions of the chip). The erratum affects both embedded and
server platforms and since we cannot say with certainity that
ALL BIOSes on systems out in the field will have the fix, we
should probably insulate ourselves in case BIOS does not do the
right thing or someone is using old BIOSes.

Refer to Revision Guide for AMD F16h models 00h-0fh, document 51810
Rev. 3.04, November2013 for details on the Erratum.

Tested the patch on Fam16h server platform and it works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: <hmh@hmh.eng.br>
Cc: <Kim.Naru@amd.com>
Cc: <Suravee.Suthikulpanit@amd.com>
Cc: <bp@suse.de>
Cc: <sherry.hurwitz@amd.com>
Link: http://lkml.kernel.org/r/1390515212-1824-1-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Minor edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-25 08:44:19 +01:00
Borislav Petkov
73f460408c x86, quirks: Shut-up a long-standing gcc warning
So gcc nags about those since forever in randconfig builds.

arch/x86/kernel/quirks.c: In function ‘ati_ixp4x0_rev’:
arch/x86/kernel/quirks.c:361:4: warning: ‘b’ is used uninitialized in this function [-Wuninitialized]
arch/x86/kernel/quirks.c: In function ‘ati_force_enable_hpet’:
arch/x86/kernel/quirks.c:367:4: warning: ‘d’ may be used uninitialized in this function [-Wuninitialized]
arch/x86/kernel/quirks.c:357:6: note: ‘d’ was declared here
arch/x86/kernel/quirks.c:407:21: warning: ‘val’ may be used uninitialized in this function [-Wuninitialized]

This function quirk is called on a SB400 chipset only anyway so the
distant possibility of a PCI access failing becomes almost impossible
there. Even if it did fail, then something else more serious is the
problem.

So zero-out the variables so that gcc shuts up but do a coarse check
on the PCI accesses at the end and signal whether any of them had an
error. They shouldn't but in case they do, we'll at least know and we
can address it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1362428180-8865-6-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-02 16:03:34 -07:00
Greg Kroah-Hartman
a18e3690a5 X86: drivers: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitconst,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:04 -08:00
Sebastian Andrzej Siewior
83452c6a43 x86/PCI: move fixup hooks from __init to __devinit
The fixups are executed once the pci-device is found which is during
boot process so __init seems fine as long as the platform does not
support hotplug.

However it is possible to remove the PCI bus at run time and have it
rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call
the fixups again.

Cc: x86@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-12 09:10:54 -06:00
Andreas Herrmann
f62ef5f3e9 x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions
I've received complaints that the numa_node attribute for family
15h model 00-0fh (e.g. Interlagos) northbridge functions shows
-1 instead of the proper node ID.

Correct this with attached quirks (similar to quirks for other
AMD CPU families used in multi-socket systems).

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Frank Arnold <frank.arnold@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/20111202072143.GA31916@alberich.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05 18:13:11 +01:00
Sergei Shtylyov
38175051f8 x86, quirks: Use pci_dev->revision
This code uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so
it wasn't converted by commit 44c10138fd ("PCI: Change all
drivers to use pci_device->revision") before being moved to arch/x86/...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/r/201107111901.39281.sshtylyov@ru.mvista.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21 10:26:00 +02:00
Udo van den Heuvel
892df7f81c x86: HPET force enable for CX700 / VIA Epia LT
Allow using HPET with the hpet=force command line option on VIA EPIA
CX700 systems.

Signed-off-by: Udo van den Heuvel <udovdh@xs4all.nl>
Cc: Robert Hancock <hancockrwd@gmail.com>
LKML-Reference:  <4C8F04DC.5060303@xs4all.nl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-15 16:27:04 +02:00
Thomas Gleixner
08be97962b x86: Force HPET readback_cmp for all ATI chipsets
commit 30a564be (x86, hpet: Restrict read back to affected ATI
chipset) restricted the workaround for the HPET bug to SMX00
chipsets. This was reasonable as those were the only ones against
which we ever got a bug report.

Stephan Wolf reported now that this patch breaks his IXP400 based
machine. Though it's confirmed to work on other IXP400 based systems.

To error out on the safe side, we force the HPET readback workaround
for all ATI SMbus class chipsets.

Reported-by: Stephan Wolf <stephan@letzte-bankreihe.de>
LKML-Reference: <alpine.LFD.2.00.1007142134140.3321@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stephan Wolf <stephan@letzte-bankreihe.de>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
2010-07-15 17:10:02 +02:00
Andreas Herrmann
fec84e3307 x86, hpet: Add reference to chipset erratum documentation for disable-hpet-msi-quirk
(At the moment the "SB700 Family Product Errata" document is available
at http://support.amd.com/us/Embedded_TechDocs/46837.pdf)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100517164324.GB10254@alberich.amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-05-17 10:04:43 -07:00
Thomas Gleixner
30a564be9d x86, hpet: Restrict read back to affected ATI chipsets
After programming the HPET, we do a readback as a workaround for
ATI/SBx00 chipsets as a synchronization.  Unfortunately this triggers
an erratum in newer ICH chipsets (ICH9+) where reading the comparator
immediately after the write returns the old value.  Furthermore, as
always, I/O reads are bad for performance.

Therefore, restrict the readback to the chipsets that need it, or, for
debugging purposes, when we are running with hpet=verbose.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <20100225185348.GA9674@linux-os.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-28 18:14:29 -07:00
Pallipadi, Venkatesh
73472a46b5 x86: Disable HPET MSI on ATI SB700/SB800
HPET MSI on platforms with ATI SB700/SB800 as they seem to have some
side-effects on floppy DMA. Do not use HPET MSI on such platforms.

Original problem report from Mark Hounschell
http://lkml.indiana.edu/hypermail/linux/kernel/0912.2/01118.html

[ This patch needs to go to stable as well. But, there are some
  conflicts that prevents the patch from going as is. I can
  rebase/resubmit to stable once the patch goes upstream.
  hpa: still Cc:'ing stable@ as an FYI. ]

Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: <stable@kernel.org>
LKML-Reference: <20100121190952.GA32523@linux-os.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-23 06:21:58 +01:00
Prarit Bhargava
303fc0870f x86: AMD Northbridge: Verify NB's node is online
Fix panic seen on some IBM and HP systems on 2.6.32-rc6:

 BUG: unable to handle kernel NULL pointer dereference at (null)
 IP: [<ffffffff8120bf3f>] find_next_bit+0x77/0x9c
  [...]
  [<ffffffff8120bbde>] cpumask_next_and+0x2e/0x3b
  [<ffffffff81225c62>] pci_device_probe+0x8e/0xf5
  [<ffffffff812b9be6>] ? driver_sysfs_add+0x47/0x6c
  [<ffffffff812b9da5>] driver_probe_device+0xd9/0x1f9
  [<ffffffff812b9f1d>] __driver_attach+0x58/0x7c
  [<ffffffff812b9ec5>] ? __driver_attach+0x0/0x7c
  [<ffffffff812b9298>] bus_for_each_dev+0x54/0x89
  [<ffffffff812b9b4f>] driver_attach+0x19/0x1b
  [<ffffffff812b97ae>] bus_add_driver+0xd3/0x23d
  [<ffffffff812ba1e7>] driver_register+0x98/0x109
  [<ffffffff81225ed0>] __pci_register_driver+0x63/0xd3
  [<ffffffff81072776>] ? up_read+0x26/0x2a
  [<ffffffffa0081000>] ? k8temp_init+0x0/0x20 [k8temp]
  [<ffffffffa008101e>] k8temp_init+0x1e/0x20 [k8temp]
  [<ffffffff8100a073>] do_one_initcall+0x6d/0x185
  [<ffffffff8108d765>] sys_init_module+0xd3/0x236
  [<ffffffff81011ac2>] system_call_fastpath+0x16/0x1b

I put in a printk and commented out the set_dev_node()
call when and got this output:

 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x0
 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x1
 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x2
 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x3

I.e. the issue appears to be that the HW has set val to a valid
value, however, the system is only configured for a single
node -- 0, the others are offline.

Check to see if the node is actually online before setting
the numa node for an AMD northbridge in quirk_amd_nb_node().

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: bhavna.sarathy@amd.com
Cc: jbarnes@virtuousgeek.org
Cc: andreas.herrmann3@amd.com
LKML-Reference: <20091112180933.12532.98685.sendpatchset@prarit.bos.redhat.com>
[ v2: clean up the code and add comments ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-16 15:43:05 +01:00
Jiri Slaby
748df9a4c6 x86/PCI: pci quirks, fix pci refcounting
Stanse found a pci reference leak in quirk_amd_nb_node.
Instead of putting nb_ht, there is a put of dev passed as
an argument.

http://stanse.fi.muni.cz/

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 14:11:02 -07:00
Ingo Molnar
5f4457a4f6 Merge branch 'linus' into x86/cpu 2009-06-07 12:22:15 +02:00
Len Brown
d2c8604121 x86, hpet: Stop soliciting hpet=force users on ICH4M
The HPET in the ICH4M is not documented in the data sheet
because it was not officially validated.

While it is fine for hackers to continue to use "hpet=force"
to enable the hardware that they have, it is not prudent to
solicit additional "hpet=force" users on this hardware.

[ Impact: remove hpet=force syslog message on old-ICH systems ]

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <alpine.LFD.2.00.0904231918510.15843@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-24 08:41:39 +02:00
Andreas Herrmann
9b94b3a19b x86: fixup numa_node information for AMD CPU northbridge functions
Currently the numa_node attribute for these PCI devices is 0 (it
corresponds to the numa_node for PCI bus 0). This is not a big issue
but incorrect.

This inconsistency can be fixed by reading the node number from CPU
NB function 0.

[ Impact: fill in dev->numa_node information, to optimize DMA allocations ]

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: jbarnes@virtuousgeek.org
LKML-Reference: <20090417100746.GG16198@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-17 18:12:36 +02:00
Ingo Molnar
3fab191002 Merge branch 'linus' into x86/core 2009-03-28 22:27:45 +01:00
Stoyan Gaydarov
8c5dfd2551 x86: BUG to BUG_ON changes
Impact: cleanup

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
LKML-Reference: <1236661850-8237-8-git-send-email-stoyboyker@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 09:55:18 +01:00
Andi Kleen
42bb8cc5e8 x86: hpet: allow force enable on ICH10 HPET
Intel "Smackover" x58 BIOS don't have HPET enabled in the BIOS, so allow
to force enable it at least.  The register layout is the same as in other
recent ICHs, so all the code can be reused.

Using numerical PCI-ID because it's unlikely the PCI-ID will be used
anywhere else.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12 19:53:24 +01:00
Janne Kulmala
bacbe99945 x86: enable HPET on Fujitsu u9200
Impact: auto-enable HPET on Fujitsu u9200

HPET timer is listed in the ACPI table, but needs a quirk entry in order to
work. Unfortunately, the quirk code runs after first HPET hpet_enable() which
has already determined that the timer doesn't work (reads 0xFFFFFFFF). This
patch allows hpet_enable() to be called again after running the quirk code.

Signed-off-by: Janne Kulmala <janne.t.kulmala@tut.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16 20:36:44 +01:00
Yinghai Lu
8b8e8c1bf7 x86: remove irqbalance in kernel for 32 bit
This has been deprecated for years, the user space irqbalanced utility
works better with numa, has configurable policies, etc...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmai.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:52 +02:00
Andreas Herrmann
e7250b8ae3 x86: hpet: modify IXP400 quirk to enable interrupts
The current quirk is incomplete. Some more chipset fiddling has to be
done to enable HPET interrupts. This patch aims to do this. From my
tests it seems to work faultlessly.

But the official statement is that HPET is not supported on SB4X0.

Users will still have to use hpet=force to enable it.

Use it at your own risk.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 18:59:41 +02:00
Linus Torvalds
da6e88f496 Merge branch 'timers/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: add PCI ID for 6300ESB force hpet
  x86: add another PCI ID for ICH6 force-hpet
  kernel-paramaters: document pmtmr= command line option
  acpi_pm clccksource: fix printk format warning
  nohz: don't stop idle tick if softirqs are pending.
  pmtmr: allow command line override of ioport
  nohz: reduce jiffies polling overhead
  hrtimer: Remove unused variables in ktime_divns()
  hrtimer: remove warning in hres_timers_resume
  posix-timers: print RT watchdog message
2008-07-15 10:39:57 -07:00
Joe Buehler
4c2a997c34 x86: add PCI ID for 6300ESB force hpet
00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
00:1f.0 Class 0601: 8086:25a1 (rev 02)

kernel: pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
kernel: hpet clockevent registered
kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
kernel: hpet0: 3 64-bit timers, 14318180 Hz

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-14 17:28:40 +02:00
Krzysztof Oledzki
1c776bf87c x86: add another PCI ID for ICH6 force-hpet
Tested on Asus P5GDC-V

$ lspci -n -n |grep ISA
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)

Force enabled HPET at base address 0xfed00000
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz

Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-14 17:28:18 +02:00
Krzysztof Oledzki
74e411cb64 x86: add another PCI ID for ICH6 force hpet.
Tested on Asus P5GDC-V

$ lspci -n -n |grep ISA
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)

Force enabled HPET at base address 0xfed00000
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz

Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-05 15:11:35 +02:00
Thomas Gleixner
7c4728f4a8 x86: print info about available HPET quirk
We have a lot of HPET quirks available which might force enable HPET
even when the BIOS does not enable it. Some of those quirks depend on
the command line option "hpet=force".

Andrew pointed out that hoping that the user will find out about this
boot option is not really helpful.

Emit a kernel info which informs the user about the "hpet=force" boot
option when we enter a quirk which depends on this option and the user
did not provide it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:27:54 +02:00
Andreas Herrmann
e8aa4667ba x86: enable hpet=force for AMD SB400
Add quirk to allow forced usage of HPET on ATI SB400.
I stumbled over machines where HPET is enabled but not reported
by BIOS. This patch configures the HPET base address and makes
it known to the OS.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:27:54 +02:00
Zbigniew Luszpinski
96bcf458cb x86: hpet clock enable quirk on nVidia nForce 430
this patch allows hpet=force on nVidia nForce 430 southbridge.
This patch was tested by me on my old Asus A8N-VM CSM (where bios does not
support hpet and does not advertise it via acpi entry). My nForce430 version:
lspci -nn | grep LPC
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260]
(rev a2)

Kernel 2.6.24.3 after patching and using hpet=force reports this:
dmesg | grep -i hpet
Kernel command line: root=/dev/sda8 ro vga=773 video=vesafb:mtrr:4,ywrap
vt.default_utf8=0 hpet=force
Force enabled HPET at base address 0xfed00000
hpet clockevent registered
Time: hpet clocksource has been installed.

grep -i hpet /proc/timer_list
Clock Event Device: hpet
 set_next_event: hpet_legacy_next_event
 set_mode:       hpet_legacy_set_mode

grep Clock /proc/timer_list (before patching)
Clock Event Device: pit
Clock Event Device: lapic

grep Clock /proc/timer_list (after patching)
Clock Event Device: hpet
Clock Event Device: lapic

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21 17:06:15 +01:00
Matthew Wilcox
9585ca02f8 Use proper abstractions in quirk_intel_irqbalance
Since we may not have a pci_dev for the device we need to access, we can't
use pci_read_config_word.  But raw_pci_read is an internal implementation
detail; it's better to use the architected pci_bus_read_config_word
interface.  Using PCI_DEVFN instead of a mysterious constant helps
reassure everyone that we really do intend to access device 8.

[ Thanks to Grant Grundler for pointing out to me that this is exactly
  what the write immediately above this is doing -- enabling device 8 to
  respond to config space cycles.
					- Matthew

  Grant also says:

	"Can you also add a comment which points at the Intel
	 documentation?

	 The 'Intel E7320 Memory Controller Hub (MCH) Datasheet' at

	  http://download.intel.com/design/chipsets/datashts/30300702.pdf

	 Page 69 documents register F4h (DEVPRES1).

	 And I just doubled checked that the 0xf4 register value is
	 restored later in the quirk (obvious when you look at the code
	 but not from the patch"

  so here it is.
					 - Linus ]

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-11 08:15:03 -08:00
Matthew Wilcox
b6ce068a12 Change pci_raw_ops to pci_raw_read/write
We want to allow different implementations of pci_raw_ops for standard
and extended config space on x86.  Rather than clutter generic code with
knowledge of this, we make pci_raw_ops private to x86 and use it to
implement the new raw interface -- raw_pci_read() and raw_pci_write().

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-10 12:52:46 -08:00
Harvey Harrison
4a5a77d106 x86: trivial sparse/checkpatch in quirks.c
arch/x86/kernel/quirks.c:384:3: warning: returning void-valued expression
arch/x86/kernel/quirks.c:387:3: warning: returning void-valued expression
arch/x86/kernel/quirks.c:390:3: warning: returning void-valued expression
arch/x86/kernel/quirks.c:393:3: warning: returning void-valued expression

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 22:39:44 +01:00
bjorn.helgaas@hp.com
9ed885541b PCI: use dev_printk in x86 quirk messages
Convert quirk printks to dev_printk().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:27 -08:00
Alistair John Strachan
dff244af01 x86: force enable HPET on (some?) ICH9 boards
Some consumer ICH9 boards (such as the Abit IP35 Pro) do not provide a BIOS
option for enabling the HPET. The same ICH workaround used for 6,7,8 can be
applied to 9. Here I enable the only PCI id that was visible on my system.

I have confirmed the HPETs work both from userspace and as a clocksource for
the running kernel (2.6.24 here) after applying this patch.

 Force enabled HPET at base address 0xfed00000
 hpet clockevent registered
 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
 hpet0: 4 64-bit timers, 14318180 Hz

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:39 +01:00
Carlos Corbacho
1b82ba6e47 x86: Add HPET force support for MCP55 (nForce 5) chipsets
Add support to force_hpet for all known MCP55 (nForce 5) chipset
LPC bridges.

These are the untested nForce 5 chips (taken from Mikko's original 
patch, and checked against pci.ids).

Signed-off-by: Carlos Corbacho <cathectic@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 arch/x86/kernel/quirks.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
2007-10-23 22:37:25 +02:00
Carlos Corbacho
d79a5f80dc x86: Force enable HPET for CK804 (nForce 4) chipsets
This patch adds a quirk from LinuxBIOS to force enable HPET on
the nVidia CK804 (nForce 4) chipset.

This quirk can very likely support more than just nForce 4
(LinuxBIOS use the same code for nForce 5), and possibly nForce 3,
but I don't have those chipsets, so cannot add and test them.

Tested on an Abit KN9 (CK804).

Signed-off-by: Carlos Corbacho <cathectic@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 Documentation/kernel-parameters.txt |    3 +-
 arch/x86/kernel/quirks.c            |   37 +++++++++++++++++++++++++++++++++++-
 2 files changed, 38 insertions(+), 2 deletions(-)
2007-10-23 22:37:25 +02:00
Udo A. Steinberg
158ad3260b x86: enable HPET on ICH3 and ICH4
ICH3 and ICH4 have undocumented HPET capabilities. This patch enables
HPET for platforms based around these ICHs.

Tested on various ICH3 and ICH4 platforms.

Because HPET is not officially documented for ICH3/4 and may not have
been validated by chipset folks, we're on thin ice here. I'd recommend
testing this patch in -hrt or -mm for a while and wait for
success/failure reports before feeding it upstream.

tglx: depends on the force_hpet command line option !

Signed-off-by: Udo A. Steinberg <us15@os.inf.tu-dresden.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-19 20:35:02 +02:00
Udo A. Steinberg
b196884e2f x86: force enable HPET on VT8235/8237 chipsets
This patch adds quirks to force enable HPET on Via VT8235 and
VT8237 chipsets. The datasheet for 8237 documents HPET
functionality (although wrongly) whereas HPET is undocumented
for 8235.

Tested on A7V880 (8237) and K7VT4A+ (8235) boards.

tglx: depends on the force_hept commandline option

Signed-off-by: Udo A. Steinberg <us15@os.inf.tu-dresden.de>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-19 20:35:02 +02:00
Thomas Gleixner
764922376c x86: quirk.c trivial coding style and white space cleanup
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-19 20:35:02 +02:00
Venki Pallipadi
ed6fb174ee x86: HPET add another ICH7 PCI id
Add another PCI ID for ICH7 force hpet.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12 23:04:24 +02:00
Venki Pallipadi
32a2da64c2 x86: HPET force enable ICH5 suspend/resume fix
A bugfix in ich5 hpet force detect which caused resumes to fail.  Thanks to
Udo A Steinberg for reporting the problem.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12 23:04:24 +02:00
Venki Pallipadi
bfe0c1cc64 x86: HPET force enable for ICH5
force_enable hpet for ICH5.

[ Build fixes from Andrew Morton ]

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12 23:04:24 +02:00