-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
-----BEGIN PGP SIGNATURE-----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=xuCz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DfL5
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfigs
Qualcomm ARM64 defconfig updates for v5.16
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
* tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm LMH driver
arm64: defconfig: Enable Qualcomm prima/pronto drivers
arm64: defconfig: Enable Sleep stats driver
arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnect
arm64: defconfig: Disable firmware sysfs fallback
Link: https://lore.kernel.org/r/20211026134953.1204327-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom:
sdm845: Add support for LMh node")' the CPUfreq gained a reference for
the two interrupts from the LMh. This means that if the LMh driver isn't
enabled CPUfreq will not probe and there's no frequency scaling.
Enable LMh to make CPUfreq functional again on SDM845.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211017204036.2761122-1-bjorn.andersson@linaro.org
The Qualcomm prima/pronto drivers consists of a remoteproc driver boot
the combined WiFi and Bluetooth firmware on the related co-processor, a
control driver to load calibration and settings firmware, the wcn36xx
WiFi driver and the SMD based Bluetooth driver.
Enable these in the defconfig to provide Bluetooth and WiFi on devices
such as the Qualcomm Dragonboard 410c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211008192840.3593362-1-bjorn.andersson@linaro.org
Enable the QTI SC7280 pinctrl, gcc and interconnect drivers required
for kernel to boot to console.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007052812.3717-1-quic_saipraka@quicinc.com
Part of the enablement of SDMA on the IMX platforms, '7f4e4afa140c
("arm64: defconfig: Enable SDMA on i.mx8mq/8mm")' also enabled
CONFIG_FW_LOADER_USER_HELPER_FALLBACK, to allow "firmware loaded by
udev".
Unfortunately having the fallback enabled does, due to the 60 second
timeout, essentially requiring userspace to provide a firmware loader.
But systemd dropped the support for this interface back in 2014 and
because arm64 is the only architecture that has this enabled, there
doesn't seem to be any standard solution available.
Examples of this problem can be found in e.g. the ath10k driver, which
with a standard distro can take about 10 minutes before wlan0 appears.
The alternative to this patch would be to change these drivers to use
firmware_request_direct(), to avoid the sysfs fallback. But that would
prevent other systems, such as Android, to rely on a userspace firmware
loader to pick the firmware from a non-standard place, with just a
custom defconfig.
This patch therefor attempts to align the arm64 defconfig will all other
architectures in the upstream kernel.
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210930215300.60290-1-bjorn.andersson@linaro.org
This enables drivers for the various audio processors found on Tegra210
and later.
-----BEGIN PGP SIGNATURE-----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=v2qB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7sxf
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfigs
arm64: tegra: Default configuration changes for v5.16-rc1
This enables drivers for the various audio processors found on Tegra210
and later.
* tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable few Tegra210 based AHUB drivers
Link: https://lore.kernel.org/r/20211008201132.1678814-8-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable configs for following modules:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These configs are used on Tegra186 and later SoCs as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Per commit 4a9a1a5602 ("arm64: socfpga: merge Agilex and N5X into
ARCH_INTEL_SOCFPGA") and commit 89d4f98ae9 ("ARM: remove zte zx
platform"), they can be dropped from defconfig now.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm Robotics RB3 Development Kit has a Renesas USB HUB on one
of the PCIe busses, which requires the releated driver to be enabled to
provide functional Ethernet and additional USB host ports.
-----BEGIN PGP SIGNATURE-----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=IzP1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9k89
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Additional Qualcomm ARM64 defconfig udpate for v5.14
The Qualcomm Robotics RB3 Development Kit has a Renesas USB HUB on one
of the PCIe busses, which requires the releated driver to be enabled to
provide functional Ethernet and additional USB host ports.
* tag 'qcom-arm64-defconfig-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable renesas usb xhci pci host controller
Link: https://lore.kernel.org/r/20210621165015.943060-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
96Boards RB3 has a USB XHCI PCI Renesas host controller. This controller
requires firmware to be loaded on its ROM/RAM, so enable the module
CONFIG_USB_XHCI_PCI_RENESAS. This depends on CONFIG_USB_XHCI_PCI so
enable that as well.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210615081749.3210344-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables VADC, audio codecs and Venus (video decoder) found on
MSM8916 among others and the SM8350 interconnect provider driver.
-----BEGIN PGP SIGNATURE-----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=Uyjq
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig udpates for v5.14
This enables VADC, audio codecs and Venus (video decoder) found on
MSM8916 among others and the SM8350 interconnect provider driver.
* tag 'qcom-arm64-defconfig-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: add drivers needed for DragonBoard410c
arm64: defconfig: qcom: enable interconnect for SM8350
Link: https://lore.kernel.org/r/20210614223704.393042-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Set MMC_MTK as built-in to be able to boot from MMC device.
-----BEGIN PGP SIGNATURE-----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=MS0W
-----END PGP SIGNATURE-----
Merge tag 'v5.13-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- Delete MTK_PMIC_WRAP added twice.
- Set MMC_MTK as built-in to be able to boot from MMC device.
* tag 'v5.13-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: defconfig: Allow Mediatek boards to boot from the mmc
arm64: defconfig: Do not override the MTK_PMIC_WRAP symbol
Link: https://lore.kernel.org/r/ad6f7f4e-7e4d-08b9-8781-71bd78444929@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the Exynos UFS controller and PHY configs. They need to be
buildin to ensure UFS devices gets detected on exynos7 and its
variant boards.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210531170057.7730-1-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
There is a clock driver that's needed when using an external
USB reference clock called usb2_clksel.
Enable it in the defconfig.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-3-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Most Layerscape SoCs support ECC error reporting for the memory
controller. Enable the corresponding module. In particular, this will
enable EDAC support on the Kontron sl28 board which comes with ECC
memory.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the MMC_MTK option necessary to boot Mediatek boards from the
mmc. Booting from the mmc is the common method used for a bunch of
boards, specially Chromebooks, to boot from. Hence this driver is
built-in.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210423075250.2616275-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Commit 'fbbe38309d56 ("arm64: defconfig: Allow mt8173-based boards to boot
from usb")' added the MTK_PMIC_WRAP config built-in. It needs to be
built-in in order to be able to boot from USB or the MMC without needing
a ramdisk, but that symbol was already defined as a module so now we are
getting the following warning:
arch/arm64/configs/defconfig:996:warning: override: reassigning to symbol MTK_PMIC_WRAP
Remove the MTK_PMIC_WRAP=m from the defconfig to remove the error.
Fixes: fbbe38309d ("arm64: defconfig: Allow mt8173-based boards to boot from usb")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210423075201.2616023-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the merge commit
and on the AsahiLinux wiki.
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2eIACgkQmmx57+YA
GNkAGg/+NY3MKphm1fhJB7X66fZwviBUt6OTiZnbAHxIX7WChgM05KvxLUFXXpDI
0E/YZU18no1YxioyLMEH+BJoZjO8fT1lu/H40KVepbx1uHI8k0pnf7qFOdWy48se
X87dunxR0Mo4iR94sDKUAEaeXuFA0xxoQLLipCn00/rN5xx6K3OL4g1Gh42bS4L8
f8ThQ/MuU7KksJjMy8YO99g2REmzGkE40ptAPc/InUln7lCJPTTmMO9a14uP9T1i
B5uQTKOihlln1RiFCmxgKl+YKeJIxNtk9FpyEJNxTrPzcUX6SDwro9A7OZdK1wVM
v/i4t2acI16670iqzf/HZg+0zGuV8xc5Axn0+PBNdA/ZdDPnmB8ej0uJhty4fI2j
nTDBS32OtdkBk+aRZthFGTt6fYEcy5hdkMQJinBKObLZbZBBPwF6P1WSGXS3AHVC
EKZf+Vh5MVyl3t5BJgDsyCmLC8p7uJYt2NzMLcCWJbKppR7dxXSByAO8JtuExEP3
Y0RjChsR87y9yzMRcy/MqLy57YwpEEmTjE2wH8UKmNzYBRFZcV1uaWX1oRhWfPJw
NGXHzpNhlC0gVk6OvIA9t6X9fQ590FWdJmVlIPIjiWJ/LHP/idmyZu+7F1H6v3/k
Ah1EVqzwsksbS8iWZlhYJB5S+tSVvtW5ZUgUQtz1VSQrT1wwKJ4=
=pBZy
-----END PGP SIGNATURE-----
Merge tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Apple M1 platform support from Arnd Bergmann:
"The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the commit message of
commit 1bb2fd3880 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
AsahiLinux wiki"
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
asm-generic/io.h: Unbork ioremap_np() declaration
arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
dt-bindings: display: Add apple,simple-framebuffer
arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
irqchip/apple-aic: Add support for the Apple Interrupt Controller
dt-bindings: interrupt-controller: Add DT bindings for apple-aic
arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
of/address: Add infrastructure to declare MMIO as non-posted
asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
arm64: Implement ioremap_np() to map MMIO as nGnRnE
docs: driver-api: device-io: Document ioremap() variants & access funcs
docs: driver-api: device-io: Document I/O access functions
asm-generic/io.h: Add a non-posted variant of ioremap()
arm64: arch_timer: Implement support for interrupt-names
dt-bindings: timer: arm,arch_timer: Add interrupt-names support
arm64: cputype: Add CPU implementor & types for the Apple M1 cores
dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
dt-bindings: arm: apple: Add bindings for Apple ARM platforms
dt-bindings: vendor-prefixes: Add apple prefix
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=SauY
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig"
* tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: configs: qcom_defconfig: Reduce CMA size to 64MB
ARM: configs: qcom_defconfig: Enable GLINK SMEM driver
ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver
ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver
ARM: configs: qcom_defconfig: Enable CPUFreq support
ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver
ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver
ARM: configs: Remove REGULATOR_USERSPACE_CONSUMER
ARM: configs: ux500: Update for new drivers
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
ARM: configs: at91: Modernize UBI defconfig part
ARM: configs: at91: Add USB Video webcam class
ARM: configs: at91: Add mtd tests as modules
ARM: configs: at91: sama5: Add audio MIKROE PROTO board
ARM: configs: at91: sama5: Enable LAN78XX as module
ARM: configs: at91: sama5: PIOBU as built-in
ARM: configs: at91: sama5: MCP16502 regulator as built-in
ARM: configs: at91: sama5: enable the Hantro G1 engine
ARM: configs: at91: sama5: update with savedefconfig
...
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
-----BEGIN PGP SIGNATURE-----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=3aF9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig udpate for 5.13
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
* tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SM8350 TLMM and GCC
Link: https://lore.kernel.org/r/20210404164841.712845-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a Kconfig option to toggle support for Apple ARM SoCs.
At this time this targets the M1 and later "Apple Silicon" Mac SoCs.
Signed-off-by: Hector Martin <marcan@marcan.st>
-----BEGIN PGP SIGNATURE-----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=g3jG
-----END PGP SIGNATURE-----
Merge tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
Enable option to boot MediaTek based chromebook (mt8173 and mt8183) with defconfig
* tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj9KcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5o5wgAhADJ5eUxUD1yrgU7P8aa/WY7QjLD
XluMFtpAaI9cXAXX3cy/4JpCb9tTXMisyvG/Kr9bt+PVQOHK892U1nybdkX+VBAC
CNTfIbHYKxHE3CdkjGqIk4CA+vx+wH151bwZThWrkiBAE5Oaqcb3aVmmcFGLUvfr
MB1JAW8dsTk3+0bmYcpRtMfFxPWoSDtgGtAQANqpROJGlJ5cv/DlDTmqbgsu8Yc4
pyjBeeKkJTc9bXw2LxVHS3H7Ozew4rJ0hEdsYWwU7emYVQzu2di9kwfnMkzDZS7F
Zxifjyen4TVWqFgxUQ3dng8B3d2tQvs6ini3b1Q5fLe5lkHTPWunIuMpAQ==
=FfMm
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.13:
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
* tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: configs: enable FlexTimer alarm timer
arm64: configs: Select REALTEK_PHY as built-in
arm64: configs: Enable PCIe support for imx8mq boards
arm64: defconfig: Enable the Hantro decoder
arm64: defconfig: add imx8qm pinctrl support
arm64: defconfig: Enable wm8960 audio driver.
arm64: defconfig: Enable asoc simple mux
arm64: defconfig: Enable devfreq support for i.MX8MQ
Link: https://lore.kernel.org/r/20210331041019.31345-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some Mediatek based Chromebooks supported in the kernel. Enable the
required config options to have the panel display working on both devices.
This was tested on the ACER Chromebook R13 (MT8173) and the Lenovo
Ideapad Duet (MT8183), but should also enable display support for similar
devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331090659.4169966-2-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the option necessary to boot mt8173-based boards to boot from
usb devices, like its phy and the regulators needed to have proper
support.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331090659.4169966-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
