This patch corrects the SPDX License Identifier style in
header file related to Eckelmann SIOX driver.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Thorsten Scherer <thorsten.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/20200101131418.GA3110@nishad
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel. It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.
4146 #include <linux/platform_device.h>
After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.
225 #include <linux/mod_devicetable.h>
This patch was build-tested on 20 different arch-es.
It also makes these drivers SubmitChecklist#1 compliant.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a siox master device is registered a kthread is created that is
only started when triggered by userspace. So this thread might be in
TASK_UNINTERRUPTIBLE state for long and trigger a warning
[ 241.130465] INFO: task siox-0:626 blocked for more than 120 seconds.
with the respective debug settings enabled. It might be right to put an
unstarted thread to TASK_IDLE (in kernel/kthread.c:kthread()) instead,
but independant of this discussion it is cleaner for
siox_master_register() to start the thread immediately. The effect is
that it enters its own waiting state and then stays in state TASK_IDLE
which doesn't trigger the above warning.
As siox_poll_thread() uses some variables of the device the
initialisation of these is moved before thread creation.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Gavin Schenk <g.schenk@eckelmann.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The type bits are part of the per-device status word. So it's natural to
consider an error in the type bits as a status error instead of only
resulting in an unsynced state.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Gavin Schenk <g.schenk@eckelmann.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Width 20 given in format string is larger than destination
buffer 'type[20]', use %19s to prevent overflowing it.
Fixes: bbecb07fa0 ("siox: new driver framework for eckelmann SIOX")
Cc: stable <stable@vger.kernel.org>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This bus driver uses GPIOs to control the four SIOX bus lines.
Acked-by: Gavin Schenk <g.schenk@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement tracing for SIOX. There are events for the data that is
written to the bus and for data being read from it.
Acked-by: Gavin Schenk <g.schenk@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SIOX is a bus system invented at Eckelmann AG to control their building
management and refrigeration systems. Traditionally the bus was
implemented on custom microcontrollers, today Linux based machines are
in use, too.
The topology on a SIOX bus looks as follows:
,------->--DCLK-->---------------+----------------------.
^ v v
,--------. ,----------------------. ,------
| | | ,--------------. | |
| |--->--DOUT-->---|->-|shift register|->-|--->---|
| | | `--------------' | |
| master | | device | | device
| | | ,--------------. | |
| |---<--DIN---<---|-<-|shift register|-<-|---<---|
| | | `--------------' | |
`--------' `----------------------' `------
v ^ ^
`----------DLD-------------------+----------------------'
There are two control lines (DCLK and DLD) driven from the bus master to
all devices in parallel and two daisy chained data lines, one for input
and one for output. DCLK is the clock to shift both chains by a single
bit. On an edge of DLD the devices latch both their input and output
shift registers.
This patch adds a framework for this bus type.
Acked-by: Gavin Schenk <g.schenk@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
