Without this patch, there is nothing to stop the preferred lifetime of a
temporary address from being greater than its valid lifetime. If that
was the case, the valid lifetime was effectively ignored.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231024212312.299370-2-alexhenrie24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the ipv6 stack output a GSO packet, if its gso_size is larger than
dst MTU, then all segments would be fragmented. However, it is possible
for a GSO packet to have a trailing segment with smaller actual size
than both gso_size as well as the MTU, which leads to an "atomic
fragment". Atomic fragments are considered harmful in RFC-8021. An
Existing report from APNIC also shows that atomic fragments are more
likely to be dropped even it is equivalent to a no-op [1].
Add an extra check in the GSO slow output path. For each segment from
the original over-sized packet, if it fits with the path MTU, then avoid
generating an atomic fragment.
Link: https://www.potaroo.net/presentations/2022-03-01-ipv6-frag.pdf [1]
Fixes: b210de4f8c ("net: ipv6: Validate GSO SKB before finish IPv6 processing")
Reported-by: David Wragg <dwragg@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Link: https://lore.kernel.org/r/90912e3503a242dca0bc36958b11ed03a2696e5e.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate GSO and non-GSO packets handling to make the logic cleaner. For
GSO packets, frag_max_size check can be omitted because it is only
useful for packets defragmented by netfilter hooks. Both local output
and GRO logic won't produce GSO packets when defragment is needed. This
also mirrors what IPv4 side code is doing.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/0e1d4599f858e2becff5c4fe0b5f843236bc3fe8.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTAX_FEATURE_ALLFRAG was added before the first git commit:
https://www.mail-archive.com/bk-commits-head@vger.kernel.org/msg03399.html
The feature would send packets to the fragmentation path if a box
receives a PMTU value with less than 1280 byte. However, since commit
9d289715eb ("ipv6: stop sending PTB packets for MTU < 1280"), such
message would be simply discarded. The feature flag is neither supported
in iproute2 utility. In theory one can still manipulate it with direct
netlink message, but it is not ideal because it was based on obsoleted
guidance of RFC-2460 (replaced by RFC-8200).
The feature would always test false at the moment, so remove related
code or mark them as unused.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d78e44dcd9968a252143ffe78460446476a472a1.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=r+0z
-----END PGP SIGNATURE-----
Merge tag 'nf-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This patch contains two late Netfilter's flowtable fixes for net:
1) Flowtable GC pushes back packets to classic path in every GC run,
ie. every second. This is because NF_FLOW_HW_ESTABLISHED is only
used by sched/act_ct (never set) and IPS_SEEN_REPLY might be unset
by the time the flow is offloaded (this status bit is only reliable
in the sched/act_ct datapath).
2) sched/act_ct logic to push back packets to classic path to reevaluate
if UDP flow is unidirectional only applies if IPS_HW_OFFLOAD_BIT is
set on and no hardware offload request is pending to be handled.
From Vlad Buslov.
These two patches fixes two problems that were introduced in the
previous 6.5 development cycle.
* tag 'nf-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: additional checks for outdated flows
netfilter: flowtable: GC pushes back packets to classic path
====================
Link: https://lore.kernel.org/r/20231025100819.2664-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once VQs are filled with empty buffers and we kick the host, it can send
connection requests. If the_virtio_vsock is not initialized before,
replies are silently dropped and do not reach the host.
virtio_transport_send_pkt() can queue packets once the_virtio_vsock is
set, but they won't be processed until vsock->tx_run is set to true. We
queue vsock->send_pkt_work when initialization finishes to send those
packets queued earlier.
Fixes: 0deab087b1 ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231024191742.14259-1-alexandru.matei@uipath.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 warns about null argument to kprintf:
In file included from fs/9p/xattr.c:12:
In function ‘v9fs_xattr_get’,
inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9:
include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
55 | _p9_debug(level, __func__, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use an empty string instead of :
- this is ok 9p-wise because p9pdu_vwritef serializes a null string
and an empty string the same way (one '0' word for length)
- since this degrades the print statements, add new single quotes for
xattr's name delimter (Old: "file = (null)", new: "file = ''")
Link: https://lore.kernel.org/r/20231008060138.517057-1-suhui@nfschina.com
Suggested-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20231025103445.1248103-2-asmadeus@codewreck.org>
syzbot reported:
| BUG: KCSAN: data-race in p9_fd_create / p9_fd_create
|
| read-write to 0xffff888130fb3d48 of 4 bytes by task 15599 on cpu 0:
| p9_fd_open net/9p/trans_fd.c:842 [inline]
| p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
| p9_client_create+0x595/0xa70 net/9p/client.c:1010
| v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
| v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
| legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
| vfs_get_tree+0x51/0x190 fs/super.c:1519
| do_new_mount+0x203/0x660 fs/namespace.c:3335
| path_mount+0x496/0xb30 fs/namespace.c:3662
| do_mount fs/namespace.c:3675 [inline]
| __do_sys_mount fs/namespace.c:3884 [inline]
| [...]
|
| read-write to 0xffff888130fb3d48 of 4 bytes by task 15563 on cpu 1:
| p9_fd_open net/9p/trans_fd.c:842 [inline]
| p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
| p9_client_create+0x595/0xa70 net/9p/client.c:1010
| v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
| v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
| legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
| vfs_get_tree+0x51/0x190 fs/super.c:1519
| do_new_mount+0x203/0x660 fs/namespace.c:3335
| path_mount+0x496/0xb30 fs/namespace.c:3662
| do_mount fs/namespace.c:3675 [inline]
| __do_sys_mount fs/namespace.c:3884 [inline]
| [...]
|
| value changed: 0x00008002 -> 0x00008802
Within p9_fd_open(), O_NONBLOCK is added to f_flags of the read and
write files. This may happen concurrently if e.g. mounting process
modifies the fd in another thread.
Mark the plain read-modify-writes as intentional data-races, with the
assumption that the result of executing the accesses concurrently will
always result in the same result despite the accesses themselves not
being atomic.
Reported-by: syzbot+e441aeeb422763cc5511@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/ZO38mqkS0TYUlpFp@elver.google.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Message-ID: <20231025103445.1248103-1-asmadeus@codewreck.org>
The MPTCP protocol account for the data enqueued on all the subflows
to the main socket send buffer, while the send buffer auto-tuning
algorithm set the main socket send buffer size as the max size among
the subflows.
That causes bad performances when at least one subflow is sndbuf
limited, e.g. due to very high latency, as the MPTCP scheduler can't
even fill such buffer.
Change the send-buffer auto-tuning algorithm to compute the main socket
send buffer size as the sum of all the subflows buffer size.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-9-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Any latency related tuning taking action at the subflow level does
not really affect the user-space, as only the main MPTCP socket is
relevant.
Anyway any limiting setting may foul the MPTCP scheduler, not being
able to fully use the subflow-level cwin, leading to very poor b/w
usage.
Enforce notsent_lowat to be a no-op on every subflow.
Note that TCP_NOTSENT_LOWAT is currently not supported, and properly
dealing with that will require more invasive changes.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-8-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the socket option synchronization for active subflows
at subflow creation time. This allows removing the now unused
unlocked variant of such helper.
While at that, clean-up a bit the mptcp_subflow_create_socket()
errors path.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-7-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The perf traces show an high cost for the MPTCP transmit path memcpy.
It turn out that the helper currently in use carries quite a bit
of unneeded overhead, e.g. to map/unmap the memory pages.
Moving to the 'copy_from_iter' variant removes such overhead and
additionally gains the no-cache support.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-6-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol allow setting sk_rcvlowat, but the value there
is currently ignored.
Additionally, the default subflows sk_rcvlowat basically disables per
subflow delayed ack: the MPTCP protocol move the incoming data from the
subflows into the msk socket as soon as the TCP stacks invokes the subflow
data_ready callback. Later, when __tcp_ack_snd_check() takes action,
the subflow-level copied_seq matches rcv_nxt, and that mandate for an
immediate ack.
Let the mptcp receive path be aware of such threshold, explicitly tracking
the amount of data available to be ready and checking vs sk_rcvlowat in
mptcp_poll() and before waking-up readers.
Additionally implement the set_rcvlowat() callback, to properly handle
the rcvbuf auto-tuning on sk_rcvlowat changes.
Finally to properly handle delayed ack, force the subflow level threshold
to 0 and instead explicitly ask for an immediate ack when the msk level th
is not reached.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-5-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'data_avail' subflow field is already used as plain boolean,
drop the custom binary enum type and switch to bool.
No functional changed intended.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-3-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the socket level counter aggregating the received data
does not take in account the data received via fastopen.
Address the issue updating the counter as required.
Fixes: 38967f424b ("mptcp: track some aggregate data counters")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-2-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol allows sockets with no alive subflows to stay
in ESTABLISHED status for and user-defined timeout, to allow for
later subflows creation.
Currently such timeout is constant - TCP_TIMEWAIT_LEN. Let the
user-space configure them via a newly added sysctl, to better cope
with busy servers and simplify (make them faster) the relevant
pktdrill tests.
Note that the new know does not apply to orphaned MPTCP socket
waiting for the data_fin handshake completion: they always wait
TCP_TIMEWAIT_LEN.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-1-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current nf_flow_is_outdated() implementation considers any flow table flow
which state diverged from its underlying CT connection status for teardown
which can be problematic in the following cases:
- Flow has never been offloaded to hardware in the first place either
because flow table has hardware offload disabled (flag
NF_FLOWTABLE_HW_OFFLOAD is not set) or because it is still pending on 'add'
workqueue to be offloaded for the first time. The former is incorrect, the
later generates excessive deletions and additions of flows.
- Flow is already pending to be updated on the workqueue. Tearing down such
flows will also generate excessive removals from the flow table, especially
on highly loaded system where the latency to re-offload a flow via 'add'
workqueue can be quite high.
When considering a flow for teardown as outdated verify that it is both
offloaded to hardware and doesn't have any pending updates.
Fixes: 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded
unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY
back to classic path in every run, ie. every second. This is because of
a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct.
In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on
and IPS_SEEN_REPLY is unreliable since users decide when to offload the
flow before, such bit might be set on at a later stage.
Fix it by adding a custom .gc handler that sched/act_ct can use to
deal with its NF_FLOW_HW_ESTABLISHED bit.
Fixes: 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reported-by: Vladimir Smelhaus <vl.sm@email.cz>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
net->ct.labels_used was meant to convey 'number of ip/nftables rules
that need the label extension allocated'.
act_ct enables this for each net namespace, which voids all attempts
to avoid ct->ext allocation when possible.
Move this increment to the control plane to request label extension
space allocation only when its needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
-----BEGIN PGP SIGNATURE-----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=AvmQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Three more fixes:
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
* tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
====================
Link: https://lore.kernel.org/r/20231024103540.19198-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This preserves the existing IFLA_DSA_MASTER which is part of the uAPI
and creates an alias named IFLA_DSA_CONDUIT.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unnecessary else clauses after return.
I copied this if / else construct from somewhere,
it makes the code harder to read.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to restructuring __dev_alloc_name() handled both printf
and non-printf names. In a clever attempt at code reuse it
always prints the name into a buffer and checks if it's
a duplicate.
Trust the bitmap, and return an error if its full.
This shrinks the possible ID space by one from 32K to 32K - 1,
as previously the max value would have been tried as a valid ID.
It seems very unlikely that anyone would care as we heard
no requests to increase the max beyond 32k.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All callers of __dev_valid_name() go thru dev_prep_valid_name()
which handles the non-printf case. Focus __dev_alloc_name() on
the sprintf case, remove the indentation level.
Minor functional change of returning -EINVAL if % is not found,
which should now never happen.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__dev_alloc_name() handles both the sprintf and non-sprintf
target names. This complicates the code.
dev_prep_valid_name() already handles the non-sprintf case,
before calling __dev_alloc_name(), make the only other caller
also go thru dev_prep_valid_name(). This way we can drop
the non-sprintf handling in __dev_alloc_name() in one of
the next changes.
commit 55a5ec9b77 ("Revert "net: core: dev_get_valid_name is now the same as dev_alloc_name_ns"") and
commit 029b6d1405 ("Revert "net: core: maybe return -EEXIST in __dev_alloc_name"")
tell us that we can't start returning -EEXIST from dev_alloc_name()
on name duplicates. Bite the bullet and pass the expected errno to
dev_prep_valid_name().
dev_prep_valid_name() must now propagate out the allocated id
for printf names.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Callers of __dev_alloc_name() want to pass dev->name as
the output buffer. Make __dev_alloc_name() not clobber
that buffer on failure, and remove the workarounds
in callers.
dev_alloc_name_ns() is now completely unnecessary.
The extra strscpy() added here will be gone by the end
of the patch series.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in the current MPTCP control plane, all operations use a netlink
attribute of the same type "MPTCP_PM_ATTR". However, add/del/get/flush
operations only parse the first element in the message _ the one that
describes MPTCP endpoints (that was named MPTCP_PM_ATTR_ADDR and
mostly used in ADD_ADDR operations _ probably the similarity of "attr",
"addr" and "add" might cause some confusion to human readers).
Convert MPTCP from 'small_ops' to 'ops', thus allowing different attributes
for each single operation, hopefully makes all this clearer to human
readers.
- use a separate attribute set for add/del/get/flush address operation,
binary compatible with the existing one, to store the endpoint address.
MPTCP_PM_ENDPOINT_ADDR is added to the uAPI (with the same value as
MPTCP_PM_ATTR_ADDR) for these operations.
- convert mptcp_pm_ops[] and add policy files accordingly.
this prepares MPTCP control plane to be described as YAML spec.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-3-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Relieve the dump callback from having to check nlmsg_type upon each
call. Prep work for set element reset locking.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Return struct nft_elem_priv instead of struct nft_set_ext for
consistency with ("netfilter: nf_tables: expose opaque set element as
struct nft_elem_priv") and to prepare the introduction of element
timeout updates from control path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of copying struct nft_set_elem into struct nft_trans_elem, store
the pointer to the opaque set element object in the transaction. Adapt
set backend API (and set backend implementations) to take the pointer to
opaque set element representation whenever required.
This patch deconstifies .remove() and .activate() set backend API since
these modify the set element opaque object. And it also constify
nft_set_elem_ext() this provides access to the nft_set_ext struct
without updating the object.
According to pahole on x86_64, this patch shrinks struct nft_trans_elem
size from 216 to 24 bytes.
This patch also reduces stack memory consumption by removing the
template struct nft_set_elem object, using the opaque set element object
instead such as from the set iterator API, catchall elements and the get
element command.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add placeholder structure and place it at the beginning of each struct
nft_*_elem for each existing set backend, instead of exposing elements
as void type to the frontend which defeats compiler type checks. Use
this pointer to this new type to replace void *.
This patch updates the following set backend API to use this new struct
nft_elem_priv placeholder structure:
- update
- deactivate
- flush
- get
as well as the following helper functions:
- nft_set_elem_ext()
- nft_set_elem_init()
- nft_set_elem_destroy()
- nf_tables_set_elem_destroy()
This patch adds nft_elem_priv_cast() to cast struct nft_elem_priv to
native element representation from the corresponding set backend.
BUILD_BUG_ON() makes sure this .priv placeholder is always at the top
of the opaque set element representation.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
.flush is always successful since this results from iterating over the
set elements to toggle mark the element as inactive in the next
generation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Relieve the dump callback from having to inspect nlmsg_type upon each
call, just do it once at start of the dump.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need to allocate it if one may just use struct netlink_callback's
scratch area for it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prep work for moving the context into struct netlink_callback scratch
area.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Name it for what it is supposed to become, a real nft_obj_dump_ctx. No
functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prep work for moving the filter into struct netlink_callback's scratch
area.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The code does not make use of cb->args fields past the first one, no
need to zero them.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The spinlock is back from the day when connabels did not have
a fixed size and reallocation had to be supported.
Remove it. This change also allows to call the helpers from
softirq or timers without deadlocks.
Also add WARN()s to catch refcounting imbalances.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
br_netfilter registers two forward hooks, one for ip and one for arp.
Just use a common function for both and then call the arp/ip helper
as needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Rule reset is not concurrency-safe per-se, so multiple CPUs may reset
the same rule at the same time. At least counter and quota expressions
will suffer from value underruns in this case.
Prevent this by introducing dedicated locking callbacks for nfnetlink
and the asynchronous dump handling to serialize access.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Outsource the reply skb preparation for non-dump getrule requests into a
distinct function. Prep work for rule reset locking.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The table lookup will be dropped from that function, so remove that
dependency from audit logging code. Using whatever is in
nla[NFTA_RULE_TABLE] is sufficient as long as the previous rule info
filling succeded.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is no need for asynchronous garbage collection, rbtree inserts
can only happen from the netlink control plane.
We already perform on-demand gc on insertion, in the area of the
tree where the insertion takes place, but we don't do a full tree
walk there for performance reasons.
Do a full gc walk at the end of the transaction instead and
remove the async worker.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Next patch adds a cllaer that doesn't hold the priv->write lock and
will need a similar function.
Rename the existing function to make it clear that it can only
be used for opportunistic gc during insertion.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A helper function for printing non-work-conserving alarms is added in
commit b00355db3f ("pkt_sched: sch_hfsc: sch_htb: Add non-work-conserving
warning handler."). In this commit, use qdisc_warn_nonwc() instead of
WARN_ONCE() to handle the non-work-conserving warning in qfq Qdisc.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20231023064729.370649-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the previous implementation, when multiple xsk sockets were
associated with a single xsk_buff_pool, a situation could arise
where the xsk_tx_list maintained data at the front for one xsk
socket while starving the xsk sockets at the back of the list.
This could result in issues such as the inability to transmit packets,
increased latency, and jitter. To address this problem, we introduce
a new variable called tx_budget_spent, which limits each xsk to transmit
a maximum of MAX_PER_SOCKET_BUDGET tx descriptors. This allocation ensures
equitable opportunities for subsequent xsk sockets to send tx descriptors.
The value of MAX_PER_SOCKET_BUDGET is set to 32.
Signed-off-by: Albert Huang <huangjie.albert@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231023125732.82261-1-huangjie.albert@bytedance.com
Before sockets became aware of net-memcg's memory pressure since
commit e1aab161e0 ("socket: initial cgroup code."), the memory
usage would be granted to raise if below average even when under
protocol's pressure. This provides fairness among the sockets of
same protocol.
That commit changes this because the heuristic will also be
effective when only memcg is under pressure which makes no sense.
So revert that behavior.
After reverting, __sk_mem_raise_allocated() no longer considers
memcg's pressure. As memcgs are isolated from each other w.r.t.
memory accounting, consuming one's budget won't affect others.
So except the places where buffer sizes are needed to be tuned,
allow workloads to use the memory they are provisioned.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231019120026.42215-3-wuyun.abel@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are now two accounting infrastructures for skmem, while the
heuristics in __sk_mem_raise_allocated() were actually introduced
before memcg was born.
Add some comments to clarify whether they can be applied to both
infrastructures or not.
Suggested-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231019120026.42215-2-wuyun.abel@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Code cleanup for both better simplicity and readability.
No functional change intended.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231019120026.42215-1-wuyun.abel@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a connection is cancelled by p9_conn_cancel(), all requests on it
should be cancelled---mark req->status as REQ_STATUS_ERROR. However,
because a race over m->err between p9_conn_cancel() and p9_fd_request(),
p9_fd_request might see the old value of m->err, think that the connection
is NOT cancelled, and then add new requests to this cancelled connection.
Fixing this issue by lock-protecting the check on m->err.
Signed-off-by: Sishuai Gong <sishuai.system@gmail.com>
Message-ID: <AA2DB53B-DFC7-4B88-9515-E4C9AFA6435D@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Currently page pool supports the below use cases:
use case 1: allocate page without page splitting using
page_pool_alloc_pages() API if the driver knows
that the memory it need is always bigger than
half of the page allocated from page pool.
use case 2: allocate page frag with page splitting using
page_pool_alloc_frag() API if the driver knows
that the memory it need is always smaller than
or equal to the half of the page allocated from
page pool.
There is emerging use case [1] & [2] that is a mix of the
above two case: the driver doesn't know the size of memory it
need beforehand, so the driver may use something like below to
allocate memory with least memory utilization and performance
penalty:
if (size << 1 > max_size)
page = page_pool_alloc_pages();
else
page = page_pool_alloc_frag();
To avoid the driver doing something like above, add the
page_pool_alloc() API to support the above use case, and update
the true size of memory that is acctually allocated by updating
'*size' back to the driver in order to avoid exacerbating
truesize underestimate problem.
Rename page_pool_free() which is used in the destroy process to
__page_pool_destroy() to avoid confusion with the newly added
API.
1. https://lore.kernel.org/all/d3ae6bd3537fbce379382ac6a42f67e22f27ece2.1683896626.git.lorenzo@kernel.org/
2. https://lore.kernel.org/all/20230526054621.18371-3-liangchen.linux@gmail.com/
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-4-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count
handling is unified and page_pool_alloc_frag() is supported
in 32-bit arch with 64-bit DMA, so remove it.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently when page_pool_create() is called with
PP_FLAG_PAGE_FRAG flag, page_pool_alloc_pages() is only
allowed to be called under the below constraints:
1. page_pool_fragment_page() need to be called to setup
page->pp_frag_count immediately.
2. page_pool_defrag_page() often need to be called to drain
the page->pp_frag_count when there is no more user will
be holding on to that page.
Those constraints exist in order to support a page to be
split into multi fragments.
And those constraints have some overhead because of the
cache line dirtying/bouncing and atomic update.
Those constraints are unavoidable for case when we need a
page to be split into more than one fragment, but there is
also case that we want to avoid the above constraints and
their overhead when a page can't be split as it can only
hold a fragment as requested by user, depending on different
use cases:
use case 1: allocate page without page splitting.
use case 2: allocate page with page splitting.
use case 3: allocate page with or without page splitting
depending on the fragment size.
Currently page pool only provide page_pool_alloc_pages() and
page_pool_alloc_frag() API to enable the 1 & 2 separately,
so we can not use a combination of 1 & 2 to enable 3, it is
not possible yet because of the per page_pool flag
PP_FLAG_PAGE_FRAG.
So in order to allow allocating unsplit page without the
overhead of split page while still allow allocating split
page we need to remove the per page_pool flag in
page_pool_is_last_frag(), as best as I can think of, it seems
there are two methods as below:
1. Add per page flag/bit to indicate a page is split or
not, which means we might need to update that flag/bit
everytime the page is recycled, dirtying the cache line
of 'struct page' for use case 1.
2. Unify the page->pp_frag_count handling for both split and
unsplit page by assuming all pages in the page pool is split
into a big fragment initially.
As page pool already supports use case 1 without dirtying the
cache line of 'struct page' whenever a page is recyclable, we
need to support the above use case 3 with minimal overhead,
especially not adding any noticeable overhead for use case 1,
and we are already doing an optimization by not updating
pp_frag_count in page_pool_defrag_page() for the last fragment
user, this patch chooses to unify the pp_frag_count handling
to support the above use case 3.
There is no noticeable performance degradation and some
justification for unifying the frag_count handling with this
patch applied using a micro-benchmark testing in [1].
1. https://lore.kernel.org/all/bf2591f8-7b3c-4480-bb2c-31dc9da1d6ac@huawei.com/
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add 0bda:b85b for Fn-Link RTL8852BE
- ISO: Many fixes for broadcast support
- Mark bcm4378/bcm4387 as BROKEN_LE_CODED
- Add support ITTIM PE50-M75C
- Add RTW8852BE device 13d3:3570
- Add support for QCA2066
- Add support for Intel Misty Peak - 8087:0038
-----BEGIN PGP SIGNATURE-----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=jUZj
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2023-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add 0bda:b85b for Fn-Link RTL8852BE
- ISO: Many fixes for broadcast support
- Mark bcm4378/bcm4387 as BROKEN_LE_CODED
- Add support ITTIM PE50-M75C
- Add RTW8852BE device 13d3:3570
- Add support for QCA2066
- Add support for Intel Misty Peak - 8087:0038
* tag 'for-net-next-2023-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
Bluetooth: hci_sync: Fix Opcode prints in bt_dev_dbg/err
Bluetooth: Fix double free in hci_conn_cleanup
Bluetooth: btmtksdio: enable bluetooth wakeup in system suspend
Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE
Bluetooth: hci_bcm4377: Mark bcm4378/bcm4387 as BROKEN_LE_CODED
Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
Bluetooth: Make handle of hci_conn be unique
Bluetooth: btusb: Add date->evt_skb is NULL check
Bluetooth: ISO: Fix bcast listener cleanup
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL
Bluetooth: ISO: Match QoS adv handle with BIG handle
Bluetooth: ISO: Allow binding a bcast listener to 0 bises
Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables
Bluetooth: qca: add support for QCA2066
Bluetooth: ISO: Set CIS bit only for devices with CIS support
Bluetooth: Add support for Intel Misty Peak - 8087:0038
Bluetooth: Add support ITTIM PE50-M75C
Bluetooth: ISO: Pass BIG encryption info through QoS
Bluetooth: ISO: Fix BIS cleanup
====================
Link: https://lore.kernel.org/r/20231023182119.3629194-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko says:
====================
devlink: finish conversion to generated split_ops
This patchset converts the remaining genetlink commands to generated
split_ops and removes the existing small_ops arrays entirely
alongside with shared netlink attribute policy.
Patches #1-#6 are just small preparations and small fixes on multiple
places. Note that couple of patches contain the "Fixes"
tag but no need to put them into -net tree.
Patch #7 is a simple rename preparation
Patch #8 is the main one in this set and adds actual definitions of cmds
in to yaml file.
Patches #9-#10 finalize the change removing bits that are no longer in
use.
====================
Link: https://lore.kernel.org/r/20231021112711.660606-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All commands are now covered by generated split_ops. Remove the
small_ops entirely alongside with unified devlink netlink policy array.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The prototypes are now generated, remove the old ones.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, some of the commands are not described in devlink yaml file
and are manually filled in net/devlink/netlink.c in small_ops. To make
all part of split_ops, add definitions of the rest of the commands
alongside with needed attributes and enums.
Note that this focuses on the kernel side. The requests are fully
described in order to generate split_op alongside with policies.
Follow-up will describe the replies in order to make the userspace
helpers complete.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All remaining doit and dumpit netlink callback functions are going to be
used by generated split ops. They expect certain name format. Rename the
callback to be aligned with generated names.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, split ops of doit and dumpit are merged into a single iter
item when they are subsequent. However, there is no guarantee that the
dumpit op is for the same cmd as doit op.
Fix this by checking if cmd is the same for both.
This problem does not occur in existing families.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If packets of a TCP flows take the fast path, we need to make sure
sk->sk_pacing_status is set to SK_PACING_FQ otherwise TCP might
fallback to internal pacing, which is not optimal.
Fixes: 076433bd78 ("net_sched: sch_fq: add fast path for mostly idle qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231020201254.732527-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A last minute change went wrong.
We need to look for a packet in all 3 bands, not only two.
Fixes: 29f834aa32 ("net_sched: sch_fq: add 3 bands and WRR scheduling")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202310201422.a22b0999-oliver.sang@intel.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231020200053.675951-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reports a slab use-after-free in hci_conn_hash_flush [1].
After releasing an object using hci_conn_del_sysfs in the
hci_conn_cleanup function, releasing the same object again
using the hci_dev_put and hci_conn_put functions causes a double free.
Here's a simplified flow:
hci_conn_del_sysfs:
hci_dev_put
put_device
kobject_put
kref_put
kobject_release
kobject_cleanup
kfree_const
kfree(name)
hci_dev_put:
...
kfree(name)
hci_conn_put:
put_device
...
kfree(name)
This patch drop the hci_dev_put and hci_conn_put function
call in hci_conn_cleanup function, because the object is
freed in hci_conn_del_sysfs function.
This patch also fixes the refcounting in hci_conn_add_sysfs() and
hci_conn_del_sysfs() to take into account device_add() failures.
This fixes CVE-2023-28464.
Link: https://syzkaller.appspot.com/bug?id=1bb51491ca5df96a5f724899d1dbb87afda61419 [1]
Signed-off-by: ZhengHan Wang <wzhmmmmm@gmail.com>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Copy the content of a Periodic Advertisement Report to BASE only if
the service UUID is Basic Audio Announcement Service UUID.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.
Fixes: 9f78191cc9 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the cleanup callback for slave bis and pa sync hcons.
Closing all bis hcons will trigger BIG Terminate Sync, while closing
all bises and the pa sync hcon will also trigger PA Terminate Sync.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The __hci_cmd_sync() function doesn't return NULL. Checking for NULL
doesn't make the code safer, it just confuses people.
When a function returns both error pointers and NULL then generally the
NULL is a kind of success case. For example, maybe we look up an item
then errors mean we ran out of memory but NULL means the item is not
found. Or if we request a feature, then error pointers mean that there
was an error but NULL means that the feature has been deliberately
turned off.
In this code it's different. The NULL is handled as if there is a bug
in __hci_cmd_sync() where it accidentally returns NULL instead of a
proper error code. This was done consistently until commit 9e14606d8f
("Bluetooth: msft: Extended monitor tracking by address filter") which
deleted the work around for the potential future bug and treated NULL as
success.
Predicting potential future bugs is complicated, but we should just fix
them instead of working around them. Instead of debating whether NULL
is failure or success, let's just say it's currently impossible and
delete the dead code.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case the user binds multiple sockets for the same BIG, the BIG
handle should be matched with the associated adv handle, if it has
already been allocated previously.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it possible to bind a broadcast listener to a broadcaster
address without asking for any BIS indexes to sync with.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently the CIS bit that can be set by the host is set for any device
that has CIS or BIS support. In reality, devices that support BIS may not
allow that bit to be set and so, the HCI bring up fails for them.
This commit fixes this by only setting the bit for CIS capable devices.
Signed-off-by: Vlad Pruteanu <vlad.pruteanu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.
After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.
After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the master BIS cleanup procedure - as opposed to CIS cleanup,
no HCI disconnect command should be issued. A master BIS should only be
terminated by disabling periodic and extended advertising, and terminating
the BIG.
In case of a Broadcast Receiver, all BIS and PA connections can be
cleaned up by calling hci_conn_failed, since it contains all function
calls that are necessary for successful cleanup.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If req->hr_proto->hp_accept() fail, we call fput() twice:
Once in the error path, but also a second time because sock->file
is at that point already associated with the file descriptor. Once
the task exits, as it would probably do after receiving an error
reading from netlink, the fd is closed, calling fput() a second time.
To fix, we move installing the file after the error path for the
hp_accept() call. In the case of errors we simply put the unused fd.
In case of success we can use fd_install() to link the sock->file
to the reserved fd.
Fixes: 7ea9c1ec66 ("net/handshake: Fix handshake_dup() ref counting")
Signed-off-by: Moritz Wanzenböck <moritz.wanzenboeck@linbit.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20231019125847.276443-1-moritz.wanzenboeck@linbit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to commit 1a074f7618 ("tls: also use init_prot_info in
tls_set_device_offload"), setting TLS_HW on TX didn't touch
prot->aad_size and prot->tail_size. They are set to 0 during context
allocation (tls_prot_info is embedded in tls_context, kzalloc'd by
tls_ctx_create).
When the RX key is configured, tls_set_sw_offload is called (for both
TLS_SW and TLS_HW). If the TX key is configured in TLS_HW mode after
the RX key has been installed, init_prot_info will now overwrite the
correct values of aad_size and tail_size, breaking SW decryption and
causing -EBADMSG errors to be returned to userspace.
Since TLS_HW doesn't use aad_size and tail_size at all (for TLS1.2,
tail_size is always 0, and aad_size is equal to TLS_HEADER_SIZE +
rec_seq_size), we can simply drop this hunk.
Fixes: 1a074f7618 ("tls: also use init_prot_info in tls_set_device_offload")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Ran Rozenstein <ranro@nvidia.com>
Link: https://lore.kernel.org/r/979d2f89a6a994d5bb49cae49a80be54150d094d.1697653889.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all public action frames have a protected variant. When MFP is
enabled drop only public action frames that have a dual protected
variant.
Fixes: 76a3059cf1 ("wifi: mac80211: drop some unprotected action frames")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The warning here shouldn't be done before we even set the
bss field (or should've used the input data). Move the
assignment before the warning to fix it.
We noticed this now because of Wen's bugfix, where the bug
fixed there had previously hidden this other bug.
Fixes: 53ad07e982 ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Confusing struct member names here resulted in passing
the wrong pointer, causing crashes. Pass the correct one.
Fixes: eb142608e2 ("wifi: cfg80211: use a struct for inform_single_bss data")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20231021154827.1142734-1-greearb@candelatech.com
[rewrite commit message, add fixes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To be able to more easily understand the code, drop robust
action frames before being associated, even if there's no
MFP in the end, as they are Class 3 Frames and shouldn't
be transmitted in the first place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231001125722.b2fd37083371.Ie9f4906e2f6c698989bce6681956ed2f9454f27c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In 4way handshake offload, cfg80211_port_authorized enables driver
to indicate successful 4way handshake to cfg80211 layer. Currently
this path of port authorization is restricted to interface type
NL80211_IFTYPE_STATION and NL80211_IFTYPE_P2P_CLIENT. This patch
extends the support for NL80211_IFTYPE_AP and NL80211_IFTYPE_P2P_GO
interfaces to authorize peer STA/P2P_CLIENT, whenever authentication
is offloaded on the AP/P2P_GO interface.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://lore.kernel.org/r/dee3b0a2b4f617e932c90bff4504a89389273632.1695721435.git.vinayak.yadawad@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to overlapping changes and merges, another error
path ended up broken. Fix this one as well.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
make htmldocs warns:
Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251.
Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'.
This is because there's a function named cfg80211_rx_assoc_resp() and a struct
named cfg80211_rx_assoc_resp, see previous patch for more info.
To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The
parameter for the function is named 'data' anyway so the naming here is
consistent.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-3-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
make htmldocs warns:
Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117.
Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'.
This is because there's a function named ieee80211_tx_status() and a struct named
ieee80211_tx_status. This has been discussed previously but no solution found:
https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/
There's also a bug open for three years with no solution in sight:
https://github.com/sphinx-doc/sphinx/pull/8313
So I guess we have no other solution than to a workaround this in the code,
for example to rename the function to ieee80211_tx_status_skb() to avoid the
name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in
which the skb is not provided as an argument, instead with
ieee80211_tx_status_skb() the skb is provided.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When using e.g. bonding, and doing a sequence such as
# iw wlan0 set type __ap
# ip link add name bond1 type bond
# ip link set wlan0 master bond1
# iw wlan0 interface del
we deadlock, since the wlan0 interface removal will cause
bonding to reset the MAC address of wlan0.
The locking would be somewhat difficult to fix, but since
this only happens during removal, we can simply ignore the
MAC address change at this time.
Reported-by: syzbot+25b3a0b24216651bc2af@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231012123447.9f9d7fd1f237.Ic3a5ef4391b670941a69cec5592aefc79d9c2890@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure including, of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSQ/jcmTAf/PKHg/@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As we are moving to MLO and links terms, also the airtime protection
will be done for a link rather than for a vif. Thus, some
drivers will need to know for which link to protect airtime.
Add link id as a parameter to the mgd_prepare_tx() callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.c7fc59a6780b.Ic88a5037d31e184a2dce0b031ece1a0a93a3a9da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there is a disassoc before the fisrt beacon we need to protect a
session for the deauth frame. Currently we are checking if we had a
beacon in the default link, which is wrong in a MLO connection and
link id != 0.
Fix this by checking all the active links, if none had a beacon then
protect a session.
If at least one link had a beacon there is no need for session
protection.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004120820.d290f0ab77b0.Ic1505cf3d60f74580d31efa7e52046947c490b85@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the station is marked as no longer authorized, we shouldn't
transmit to it any longer, but in particular we shouldn't be able
to transmit to it after removing keys, which might lead to frames
being sent out unencrypted depending on the exact hardware offload
mechanism. Thus, instead of flushing only on station destruction,
which covers only some cases, always flush on unauthorization.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.d47f528829e7.I96903652c7ee0c5c66891f8b2364383da8e45a1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When this flow is invoked with the "drop" parameter as true,
we only drop the frames from the hw queues, but not from the
sw queues.
So when we call wake_queues() after hw queue purging, all the
frames from the sw queues will be TX'ed,
when what we actually want to do is to purge all queues
in order to not TX anything...
This can cause, for example, TXing data frames to the peer
after the deauth frame was sent.
Fix this by purging the sw queues in addition to the hw queues
if the drop parameter is true.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.8fc2ee23e56f.I8b3f6def9c28ea96261e2d31df8786986fb5385b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since I'm getting a warning here right now, fix the
kernel-doc to be "Returns:" rather than just writing
that out in the doc paragraph.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ab3b9274bf07.If263f9f6726d6ad4661f8603e6a4485e0385d67f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the remain on channel is removed at the time it should
have expired, we have a race: the driver could be handling
the flow of the expiration while mac80211 is cancelling
that very same remain on channel request.
This wouldn't be problem in itself, but since mac80211
can send the next request to the driver in the cancellation
flow, we can get to the following situation:
CPU0 CPU1
expiration of roc in driver
ieee80211_remain_on_channel_expired()
Cancellation of the roc
schedules a worker (hw_roc_done)
Add next roc
hw_roc_done_wk runs and ends
the second roc prematurely.
Since, by design, there is only one single request sent to the
driver at a time, we can safely assume that after the cancel()
request returns from the driver, we should not handle any worker
that handles the expiration of the request.
Cancel the hw_roc_done worker after the cancellation to make
sure we start the next one with a clean slate.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.4e4469be20ac.Iab0525f5cc4698acf23eab98b8b1eec02099cde0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since userspace can choose now what link to establish the
TDLS on, we should know on what channel to do session protection.
Add a link id parameter to this callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ef12ce3eb835.If864f406cfd9e24f36a2b88fd13a37328633fcf9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When setting the interface links, ignore the change iff both the
valid links and the dormant links did not change. This is needed
to support cases where the valid links didn't change but the dormant
links did.
Fixes: 6d543b34db ("wifi: mac80211: Support disabled links during association")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.0357b6306587.I7dbfec347949b629fea680d246a650d6207ff217@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the scan parameters for a 6GHz scan specify a unicast
BSSID address, and the corresponding AP is found in the scan
list, add a corresponding entry in the collocated AP list,
so this AP would be directly probed even if it was not
advertised as a collocated AP.
This is needed for handling a scan request that is intended
for a ML probe flow, where user space can requests a scan
to retrieve information for other links in the AP MLD.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.54b954bc02ad.I1c072793d3d77a4c8fbbc64b4db5cce1bbb00382@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Draft P802.11be_D3.1 added operating class to describe 320 MHz
operation in the 6GHz band. Include this new operating class in
ieee80211_operating_class_to_band().
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.bed4a007d81b.I3eb4b8fe39c0c1a988c98a103b11a9f45a92b038@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EMLSR operation and SMPS operation cannot coexist. Thus, when EMLSR is
enabled, all SMPS signaling towards the AP should be stopped (it is
expected that the AP will consider SMPS to be off).
Rename IEEE80211_VIF_DISABLE_SMPS_OVERRIDE to IEEE80211_VIF_EML_ACTIVE
and use the flag as an indication from the driver that EMLSR is enabled.
When EMLSR is enabled SMPS flows towards the AP MLD should be stopped.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.fb2c2f9a0645.If6df5357568abd623a081f0f33b07e63fb8bba99@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, we have a per-link debugfs directory which contains the
per-link files. In case of non-MLO we would like to put the per-link
files in the netdev directory to keep it how it was before MLO.
- Upon interface creation the netdev will be created with the per-link
files in it.
- Upon switching to MLO: delete the entire netdev directory and then
recreate it without the per-link files. Then the per-link directories
with the per-link files in it will be created in ieee80211_link_init()
- Upon switching to non-MLO: delete the entire netdev directory
(including the per-link directories) and recreate it with the per-link
files in it.
Note that this also aligns to always call the vif link debugfs
method for the deflink as promised in the documentation, which
wasn't done before.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.082e698caca9.I5bef7b2026e0f58b4a958b3d1f459ac5baeccfc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a callback which the driver can use to add the vif debugfs.
We used to have this back until commit d260ff12e7 ("mac80211:
remove vif debugfs driver callbacks") where we thought that it
will be easier to just add them during interface add/remove.
However, now with multi-link, we want to have proper debugfs
for drivers for multi-link where some files might be in the
netdev for non-MLO connections, and in the links for MLO ones,
so we need to do some reconstruction when switching the mode.
Moving to this new call enables that and MLO drivers will have
to use it for proper debugfs operation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ac38913f6ab7.Iee731d746bb08fcc628fa776f337016a12dc62ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can delete any that we want to remove, but we can't
recreate the links as they already exist.
Fixes: 170cd6a66d ("wifi: mac80211: add netdev per-link debugfs data and driver hook")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.3d0214838421.I512a0ff86f631ff42bf25ea0cb2e8e8616794a94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the association command fails then the authentication is still valid
and it makes sense to keep it alive. Otherwise, we would currently get
into an inconsistent state because mac80211 on the one hand is
disconnected but on the other hand the state is not entirely cleared
and a new authentication could not continue.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.c9855f46ebc8.I7f3dcd4120a186484a91b87560e9b7201d40984f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the ability to report in tcp_info.tcpi_options if
a flow is using usec resolution in TCP TS val.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back in 2015, Van Jacobson suggested to use usec resolution in TCP TS values.
This has been implemented in our private kernels.
Goals were :
1) better observability of delays in networking stacks.
2) better disambiguation of events based on TSval/ecr values.
3) building block for congestion control modules needing usec resolution.
Back then we implemented a schem based on private SYN options
to negotiate the feature.
For upstream submission, we chose to use a route attribute,
because this feature is probably going to be used in private
networks [1] [2].
ip route add 10/8 ... features tcp_usec_ts
Note that RFC 7323 recommends a
"timestamp clock frequency in the range 1 ms to 1 sec per tick.",
but also mentions
"the maximum acceptable clock frequency is one tick every 59 ns."
[1] Unfortunately RFC 7323 5.5 (Outdated Timestamps) suggests
to invalidate TS.Recent values after a flow was idle for more
than 24 days. This is the part making usec_ts a problem
for peers following this recommendation for long living
idle flows.
[2] Attempts to standardize usec ts went nowhere:
https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdfhttps://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before adding usec TS support, add tcp_rtt_tsopt_us() helper
to factorize code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helper returns a TSval from a TCP socket.
It currently calls tcp_time_stamp_ms() but will soon
be able to return a usec based TSval, depending
on an upcoming tp->tcp_usec_ts field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_ns_to_ts() is only used once from cookie_init_timestamp().
Also add the 'bool usec_ts' parameter to enable usec TS later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helper returns a 32bit TCP TSval from skb->tstamp.
As we are going to support usec or ms units soon, rename it
to tcp_skb_timestamp_ts() and add a boolean to select the unit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of usec TCP TS support, remove tcp_time_stamp_raw()
in favor of tcp_clock_ts() helper. This helper will return a suitable
32bit result to feed TS values, depending on a socket field.
Also add tcp_tw_tsval() and tcp_rsk_tsval() helpers to factorize
the details.
We do not yet support usec timestamps.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It delivers current TCP time stamp in ms unit, and is used
in place of confusing tcp_time_stamp_raw()
It is the same family than tcp_clock_ns() and tcp_clock_ms().
tcp_time_stamp_raw() will be replaced later for TSval
contexts with a more descriptive name.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of adding usec TCP TS values, add tcp_time_stamp_ms()
for contexts needing ms based values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.
Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.
Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.
tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.
While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);
Fixes: 9a568de481 ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
This is similar to what already done for IPv4 in commit 72fc68c635
("ipv4: add new arguments to udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
This is similar to what already done for IPv4 in commit 78f3655adc
("ipv4: remove "proto" argument from udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the moment ip6_dst_lookup_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel6_dst_lookup() and move it to file
net/ipv6/ip6_udp_tunnel.c.
This is similar to what already done for IPv4 in commit bf3fcbf7e7
("ipv4: rename and move ip_route_output_tunnel()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checking the 'adev' variable is unnecessary,
because 'cdev' has already been checked earlier.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 656d98b09d ("[ATM]: basic sysfs support for ATM devices")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
A recent patch changed xfrm6_udp_encap_rcv to not
free the skb itself anymore but fogot the case
where xfrm4_udp_encap_rcv is called subsequently.
Fix this by moving the call to xfrm4_udp_encap_rcv
from __xfrm6_udp_encap_rcv to xfrm6_udp_encap_rcv.
Fixes: 221ddb723d ("xfrm: Support GRO for IPv6 ESP in UDP encapsulation")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
SOFTCONN tasks need to periodically check if the transport is still
connected, so that they can time out if that is not the case.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up xs_wake_error() to close the socket when a hard error is being
reported. Usually, that means an ECONNRESET was received on a connection
attempt.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If connect() is returning ECONNRESET, it usually means that nothing is
listening on that port. If so, a rebind might be required in order to
obtain the new port on which the RPC service is listening.
Fixes: fd01b25979 ("SUNRPC: ECONNREFUSED should cause a rebind.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit 62d9f1a694 ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// simulate srtt to 100ms
+0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0 write(4, ..., 10000) = 10000
+0 > P. 1:10001(10000) ack 1
// inject sack
+.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0 > . 1:1001(1000) ack 1
// inject sack reneging
+.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.
Fixes: 62d9f1a694 ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval
can be written from sysfs.
2) tbl->last_flush is read locklessly from neigh_alloc()
3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()
4) neightbl_fill_info() reads cpu stats that can be changed concurrently.
Fixes: c7fb64db00 ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Under memory stress conditions, tcp_sendmsg_locked()
might call sk_stream_wait_memory(), thus releasing the socket lock.
If a fresh skb has been allocated prior to this,
we should not leave it in the write queue otherwise
tcp_write_xmit() could panic.
This apparently does not happen often, but a future change
in __sk_mem_raise_allocated() that Shakeel and others are
considering would increase chances of being hurt.
Under discussion is to remove this controversial part:
/* Fail only if socket is _under_ its sndbuf.
* In this case we cannot block, so that we have to fail.
*/
if (sk->sk_wmem_queued + size >= sk->sk_sndbuf) {
/* Force charge with __GFP_NOFAIL */
if (memcg_charge && !charged) {
mem_cgroup_charge_skmem(sk->sk_memcg, amt,
gfp_memcg_charge() | __GFP_NOFAIL);
}
return 1;
}
Fixes: fdfc5c8594 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20231019112457.1190114-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 26c5334d34 ("ethtool: Add forced speed to supported link
modes maps") added a dependency between ethtool.h and linkmode.h.
The dependency in the opposite direction already exists so the
new code was inserted in an awkward place.
The reason for ethtool.h to include linkmode.h, is that
ethtool_forced_speed_maps_init() is a static inline helper.
That's not really necessary.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reproduce environment:
network with 3 VM linuxs is connected as below:
VM1<---->VM2(latest kernel 6.5.0-rc7)<---->VM3
VM1: eth0 ip: 192.168.122.207 MTU 1500
VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500
VM3: eth0 ip: 192.168.123.240 MTU 1500
Reproduce:
VM1 send 1400 bytes UDP data to VM3 using tools scapy with flags=0.
scapy command:
send(IP(dst="192.168.123.240",flags=0)/UDP()/str('0'*1400),count=1,
inter=1.000000)
Result:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
FragOKs FragFails FragCreates
Ip: 1 64 11 0 3 4 0 0 4 7 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
FragOKs FragFails FragCreates
Ip: 1 64 12 0 3 5 0 0 4 8 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
"ForwDatagrams" increase from 4 to 5 and "OutRequests" also increase
from 7 to 8.
Issue description and patch:
IPSTATS_MIB_OUTPKTS("OutRequests") is counted with IPSTATS_MIB_OUTOCTETS
("OutOctets") in ip_finish_output2().
According to RFC 4293, it is "OutOctets" counted with "OutTransmits" but
not "OutRequests". "OutRequests" does not include any datagrams counted
in "ForwDatagrams".
ipSystemStatsOutOctets OBJECT-TYPE
DESCRIPTION
"The total number of octets in IP datagrams delivered to the
lower layers for transmission. Octets from datagrams
counted in ipIfStatsOutTransmits MUST be counted here.
ipSystemStatsOutRequests OBJECT-TYPE
DESCRIPTION
"The total number of IP datagrams that local IP user-
protocols (including ICMP) supplied to IP in requests for
transmission. Note that this counter does not include any
datagrams counted in ipSystemStatsOutForwDatagrams.
So do patch to define IPSTATS_MIB_OUTPKTS to "OutTransmits" and add
IPSTATS_MIB_OUTREQUESTS for "OutRequests".
Add IPSTATS_MIB_OUTREQUESTS counter in __ip_local_out() for ipv4 and add
IPSTATS_MIB_OUT counter in ip6_finish_output2() for ipv6.
Test result with patch:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 9 0 5 1 0 0 3 3 0 0 0 0 0 0 0 0 0 4
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 2976 1896 0 0 0 0 0 9 0 0 0 0
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 10 0 5 2 0 0 3 3 0 0 0 0 0 0 0 0 0 5
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 4404 3324 0 0 0 0 0 10 0 0 0 0
----------------------------------------------------------------------
"ForwDatagrams" increase from 1 to 2 and "OutRequests" is keeping 3.
"OutTransmits" increase from 4 to 5 and "OutOctets" increase 1428.
Signed-off-by: Heng Guo <heng.guo@windriver.com>
Reviewed-by: Kun Song <Kun.Song@windriver.com>
Reviewed-by: Filip Pudak <filip.pudak@windriver.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently push everyone to use padding to align 64b values
in netlink. Un-padded nla_put_u64() doesn't even exist any more.
The story behind this possibly start with this thread:
https://lore.kernel.org/netdev/20121204.130914.1457976839967676240.davem@davemloft.net/
where DaveM was concerned about the alignment of a structure
containing 64b stats. If user space tries to access such struct
directly:
struct some_stats *stats = nla_data(attr);
printf("A: %llu", stats->a);
lack of alignment may become problematic for some architectures.
These days we most often put every single member in a separate
attribute, meaning that the code above would use a helper like
nla_get_u64(), which can deal with alignment internally.
Even for arches which don't have good unaligned access - access
aligned to 4B should be pretty efficient.
Kernel and well known libraries deal with unaligned input already.
Padded 64b is quite space-inefficient (64b + pad means at worst 16B
per attr vs 32b which takes 8B). It is also more typing:
if (nla_put_u64_pad(rsp, NETDEV_A_SOMETHING_SOMETHING,
value, NETDEV_A_SOMETHING_PAD))
Create a new attribute type which will use 32 bits at netlink
level if value is small enough (probably most of the time?),
and (4B-aligned) 64 bits otherwise. Kernel API is just:
if (nla_put_uint(rsp, NETDEV_A_SOMETHING_SOMETHING, value))
Calling this new type "just" sint / uint with no specific size
will hopefully also make people more comfortable with using it.
Currently telling people "don't use u8, you may need the bits,
and netlink will round up to 4B, anyway" is the #1 comment
we give to newcomers.
In terms of netlink layout it looks like this:
0 4 8 12 16
32b: [nlattr][ u32 ]
64b: [ pad ][nlattr][ u64 ]
uint(32) [nlattr][ u32 ]
uint(64) [nlattr][ u64 ]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since struct devlink_fmsg retains error by now (see 1st patch of this
series), there is no longer need to keep returning it in each call.
This is a separate commit to allow per-driver conversion to stop using
those return values.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Retain error value in struct devlink_fmsg, to relieve drivers from
checking it after each call.
Note that fmsg is an in-memory builder/buffer of formatted message,
so it's not the case that half baked message was sent somewhere.
We could find following scheme in multiple drivers:
err = devlink_fmsg_obj_nest_start(fmsg);
if (err)
return err;
err = devlink_fmsg_string_pair_put(fmsg, "src", src);
if (err)
return err;
err = devlink_fmsg_something(fmsg, foo, bar);
if (err)
return err;
// and so on...
err = devlink_fmsg_obj_nest_end(fmsg);
With retaining error API that translates to:
devlink_fmsg_obj_nest_start(fmsg);
devlink_fmsg_string_pair_put(fmsg, "src", src);
devlink_fmsg_something(fmsg, foo, bar);
// and so on...
devlink_fmsg_obj_nest_end(fmsg);
What means we check error just when is time to send.
Possible error scenarios are developer error (API misuse) and memory
exhaustion, both cases are good candidates to choose readability
over fastest possible exit.
Note that this patch keeps returning errors, to allow per-driver conversion
to the new API, but those are not needed at this point already.
This commit itself is an illustration of benefits for the dev-user,
more of it will be in separate commits of the series.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split __sys_getsockopt() into two functions by removing the core
logic into a sub-function (do_sock_getsockopt()). This will avoid
code duplication when doing the same operation in other callers, for
instance.
do_sock_getsockopt() will be called by io_uring getsockopt() command
operation in the following patch.
The same was done for the setsockopt pair.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-5-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split __sys_setsockopt() into two functions by removing the core
logic into a sub-function (do_sock_setsockopt()). This will avoid
code duplication when doing the same operation in other callers, for
instance.
do_sock_setsockopt() will be called by io_uring setsockopt() command
operation in the following patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-4-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The whole network stack uses sockptr, and while it doesn't move to
something more modern, let's use sockptr in setsockptr BPF hooks, so, it
could be used by other callers.
The main motivation for this change is to use it in the io_uring
{g,s}etsockopt(), which will use a userspace pointer for *optval, but, a
kernel value for optlen.
Link: https://lore.kernel.org/all/ZSArfLaaGcfd8LH8@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The whole network stack uses sockptr, and while it doesn't move to
something more modern, let's use sockptr in getsockptr BPF hooks, so, it
could be used by other callers.
The main motivation for this change is to use it in the io_uring
{g,s}etsockopt(), which will use a userspace pointer for *optval, but, a
kernel value for optlen.
Link: https://lore.kernel.org/all/ZSArfLaaGcfd8LH8@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as fairly
clear-cut user reported regressions. The mlx5 DMA bug was causing strife
for 390x folks. The fixes themselves are not particularly scary, tho.
No open investigations / outstanding reports at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations,
make devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve,
previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset",
needs more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting,
it was denied to plug a constant source of bugs but turns out
.NET depends on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560",
it's causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains
a single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding
(bless Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z1F6
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow"
* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...
This reverts commit 108a36d07c.
It was reported that this fix breaks the possibility to remove existing WoL
flags. For example:
~$ ethtool lan2
...
Supports Wake-on: pg
Wake-on: d
...
~$ ethtool -s lan2 wol gp
~$ ethtool lan2
...
Wake-on: pg
...
~$ ethtool -s lan2 wol d
~$ ethtool lan2
...
Wake-on: pg
...
This worked correctly before this commit because we were always updating
a zero bitmap (since commit 6699170376 ("ethtool: fix application of
verbose no_mask bitset"), that is) so that the rest was left zero
naturally. But now the 1->0 change (old_val is true, bit not present in
netlink nest) no longer works.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/netdev/20231019095140.l6fffnszraeb6iiw@lion.mk-sys.cz/
Cc: stable@vger.kernel.org
Fixes: 108a36d07c ("ethtool: Fix mod state of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20231019-feature_ptp_bitset_fix-v1-1-70f3c429a221@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When closing the first subflow, the MPTCP protocol unconditionally
calls tcp_disconnect(), which in turn generates a reset if the subflow
is established.
That is unexpected and different from what MPTCP does with MPJ
subflows, where resets are generated only on FASTCLOSE and other edge
scenarios.
We can't reuse for the first subflow the same code in place for MPJ
subflows, as MPTCP clean them up completely via a tcp_close() call,
while must keep the first subflow socket alive for later re-usage, due
to implementation constraints.
This patch adds a new helper __mptcp_subflow_disconnect() that
encapsulates, a logic similar to tcp_close, issuing a reset only when
the MPTCP_CF_FASTCLOSE flag is set, and performing a clean shutdown
otherwise.
Fixes: c2b2ae3925 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-4-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christoph reported that the MPTCP protocol can find the subflow-level
write queue unexpectedly not empty while crafting a zero-window probe,
hitting a warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 188 at net/mptcp/protocol.c:1312 mptcp_sendmsg_frag+0xc06/0xe70
Modules linked in:
CPU: 0 PID: 188 Comm: kworker/0:2 Not tainted 6.6.0-rc2-g1176aa719d7a #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:mptcp_sendmsg_frag+0xc06/0xe70 net/mptcp/protocol.c:1312
RAX: 47d0530de347ff6a RBX: 47d0530de347ff6b RCX: ffff8881015d3c00
RDX: ffff8881015d3c00 RSI: 47d0530de347ff6b RDI: 47d0530de347ff6b
RBP: 47d0530de347ff6b R08: ffffffff8243c6a8 R09: ffffffff82042d9c
R10: 0000000000000002 R11: ffffffff82056850 R12: ffff88812a13d580
R13: 0000000000000001 R14: ffff88812b375e50 R15: ffff88812bbf3200
FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000695118 CR3: 0000000115dfc001 CR4: 0000000000170ef0
Call Trace:
<TASK>
__subflow_push_pending+0xa4/0x420 net/mptcp/protocol.c:1545
__mptcp_push_pending+0x128/0x3b0 net/mptcp/protocol.c:1614
mptcp_release_cb+0x218/0x5b0 net/mptcp/protocol.c:3391
release_sock+0xf6/0x100 net/core/sock.c:3521
mptcp_worker+0x6e8/0x8f0 net/mptcp/protocol.c:2746
process_scheduled_works+0x341/0x690 kernel/workqueue.c:2630
worker_thread+0x3a7/0x610 kernel/workqueue.c:2784
kthread+0x143/0x180 kernel/kthread.c:388
ret_from_fork+0x4d/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:304
</TASK>
The root cause of the issue is that expectations are wrong: e.g. due
to MPTCP-level re-injection we can hit the critical condition.
Explicitly avoid the zero-window probe when the subflow write queue
is not empty and drop the related warnings.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/444
Fixes: f70cad1085 ("mptcp: stop relying on tcp_tx_skb_cache")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-3-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol can acquire the subflow-level socket lock and
cause the tcp backlog usage. When inserting new skbs into the
backlog, the stack will try to coalesce them.
Currently, we have no check in place to ensure that such coalescing
will respect the MPTCP-level DSS, and that may cause data stream
corruption, as reported by Christoph.
Address the issue by adding the relevant admission check for coalescing
in tcp_add_backlog().
Note the issue is not easy to reproduce, as the MPTCP protocol tries
hard to avoid acquiring the subflow-level socket lock.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/420
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-2-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The altname nodes are currently not moved to the new netns
when netdevice itself moves:
[ ~]# ip netns add test
[ ~]# ip -netns test link add name eth0 type dummy
[ ~]# ip -netns test link property add dev eth0 altname some-name
[ ~]# ip -netns test link show dev some-name
2: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 1e:67:ed:19:3d:24 brd ff:ff:ff:ff:ff:ff
altname some-name
[ ~]# ip -netns test link set dev eth0 netns 1
[ ~]# ip link
...
3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
altname some-name
[ ~]# ip li show dev some-name
Device "some-name" does not exist.
Remove them from the hash table when device is unlisted
and add back when listed again.
Fixes: 36fbf1e52b ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Altnames are accessed under RCU (dev_get_by_name_rcu())
but freed by kfree() with no synchronization point.
Each node has one or two allocations (node and a variable-size
name, sometimes the name is netdev->name). Adding rcu_heads
here is a bit tedious. Besides most code which unlists the names
already has rcu barriers - so take the simpler approach of adding
synchronize_rcu(). Note that the one on the unregistration path
(which matters more) is removed by the next fix.
Fixes: ff92741270 ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's currently possible to create an altname conflicting
with an altname or real name of another device by creating
it in another netns and moving it over:
[ ~]$ ip link add dev eth0 type dummy
[ ~]$ ip netns add test
[ ~]$ ip -netns test link add dev ethX netns test type dummy
[ ~]$ ip -netns test link property add dev ethX altname eth0
[ ~]$ ip -netns test link set dev ethX netns 1
[ ~]$ ip link
...
3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
...
5: ethX: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 26:b7:28:78:38:0f brd ff:ff:ff:ff:ff:ff
altname eth0
Create a macro for walking the altnames, this hopefully makes
it clearer that the list we walk contains only altnames.
Which is otherwise not entirely intuitive.
Fixes: 36fbf1e52b ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dev_get_valid_name() overwrites the netdev's name on success.
This makes it hard to use in prepare-commit-like fashion,
where we do validation first, and "commit" to the change
later.
Factor out a helper which lets us save the new name to a buffer.
Use it to fix the problem of notification on netns move having
incorrect name:
5: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff
6: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 1e:4a:34:36:e3:cd brd ff:ff:ff:ff:ff:ff
[ ~]# ip link set dev eth0 netns 1 name eth1
ip monitor inside netns:
Deleted inet eth0
Deleted inet6 eth0
Deleted 5: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff new-netnsid 0 new-ifindex 7
Name is reported as eth1 in old netns for ifindex 5, already renamed.
Fixes: d90310243f ("net: device name allocation cleanups")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We currently have napi_if_scheduled_mark_missed that can be used to
check if napi is scheduled but that does more thing than simply checking
it and return a bool. Some driver already implement custom function to
check if napi is scheduled.
Drop these custom function and introduce napi_is_scheduled that simply
check if napi is scheduled atomically.
Update any driver and code that implement a similar check and instead
use this new helper.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJBBAABCAArFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmUvzlINHGZ3QHN0cmxl
bi5kZQAKCRBwkajZrV/2APelD/9b9FP1jNIX11OqPqmOL0bgGczU5OW3iI6VxLOx
1qygw4pXHjtLGfNBEA7QtckbkFgXIxou/JvgavYBXY5mGDHDEJuV3JnX/HqIxKy9
czAahqkdQ94/a0mI9wFuPY5ZeLTF/yGAe1iLKKWf4f//QwTc7dCfDsGjdKeKLHwL
ye0f0MRwIwojTjBCf+szlacYrVE+Jgog+GFKX6F3eUtA+JOhpspwWNCPt5W/IQg/
Q9Bl0dRQeqbIUzaB2YxvIFxB80NG4dg31ThYfgFW8IBz6bTYm3Vml4iorGSkYAqD
c4PjKY/46/cpCAzkLd+5c+WE0YLMlq2u52KJXThUd5Lpzy3QG8KG5AMR1vXDVw2s
7fLNeJGH+4zHDY3nXVTqCA/IV2x2sNwgfF6VZHvvkqpKhL5euaKJGu3a7/KGOhoI
JO1Q6CBaTpZ3HuBNJoTI/uMeZJySlfv7080pHIypy7mYtTyChQC7/IvYpaI9yFwU
Ka7wIR5MOJ/npaj6ZpVkbNQLntt+SbJINyTiJax5vO63FJ5kSrdgPZiR1PwtMHpZ
br1e+2eFz8foxaEf6ADL/5QwfIvfglT4fVk/flsukJdyrsPxI2H7kYm/6G8Fcbu3
TOZQmsNvqnqUpnQLXYe/YbtKoIvTAZOoGy/rcj+IIl2ym/2DiwbWx2nye6uwufIH
UlP5gA==
=M/4J
-----END PGP SIGNATURE-----
Merge tag 'nf-23-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
First patch, from Phil Sutter, reduces number of audit notifications
when userspace requests to re-set stateful objects.
This change also comes with a selftest update.
Second patch, also from Phil, moves the nftables audit selftest
to its own netns to avoid interference with the init netns.
Third patch, from Pablo Neira, fixes an inconsistency with the "rbtree"
set backend: When set element X has expired, a request to delete element
X should fail (like with all other backends).
Finally, patch four, also from Pablo, reverts a recent attempt to speed
up abort of a large pending update with the "pipapo" set backend.
It could cause stray references to remain in the set, which then
results in a double-free.
* tag 'nf-23-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: revert do not remove elements if set backend implements .abort
netfilter: nft_set_rbtree: .deactivate fails if element has expired
selftests: netfilter: Run nft_audit.sh in its own netns
netfilter: nf_tables: audit log object reset once per table
====================
Link: https://lore.kernel.org/r/20231018125605.27299-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* prevent value bounce/glitch in rfkill GPIO probe
* fix lockdep report in rfkill
* fix error path leak in mac80211 key handling
* use system_unbound_wq for wiphy work since it
can take longer
-----BEGIN PGP SIGNATURE-----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=Sth1
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A few more fixes:
* prevent value bounce/glitch in rfkill GPIO probe
* fix lockdep report in rfkill
* fix error path leak in mac80211 key handling
* use system_unbound_wq for wiphy work since it
can take longer
* tag 'wireless-2023-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
net: rfkill: reduce data->mtx scope in rfkill_fop_open
net: rfkill: gpio: prevent value glitch during probe
wifi: mac80211: fix error path key leak
wifi: cfg80211: use system_unbound_wq for wiphy work
====================
Link: https://lore.kernel.org/r/20231018071041.8175-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the blamed commit below, I completely forgot to release the acquired
resources before erroring out in the TCP BPF code, as reported by Dan.
Address the issues by replacing the bogus return with a jump to the
relevant cleanup code.
Fixes: 419ce133ab ("tcp: allow again tcp_disconnect() when threads are waiting")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/8f99194c698bcef12666f0a9a999c58f8b1cb52c.1697557782.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Theune says:
I upgraded from 6.1.38 to 6.1.55 this morning and it broke my traffic shaping script,
leaving me with a non-functional uplink on a remote router.
A 'rt' curve cannot be used as a inner curve (parent class), but we were
allowing such configurations since the qdisc was introduced. Such
configurations would trigger a UAF as Budimir explains:
The parent will have vttree_insert() called on it in init_vf(),
but will not have vttree_remove() called on it in update_vf()
because it does not have the HFSC_FSC flag set.
The qdisc always assumes that inner classes have the HFSC_FSC flag set.
This is by design as it doesn't make sense 'qdisc wise' for an 'rt'
curve to be an inner curve.
Budimir's original patch disallows users to add classes with a 'rt'
parent, but this is too strict as it breaks users that have been using
'rt' as a inner class. Another approach, taken by this patch, is to
upgrade the inner 'rt' into a 'sc', warning the user in the process.
It avoids the UAF reported by Budimir while also being more permissive
to bad scripts/users/code using 'rt' as a inner class.
Users checking the `tc class ls [...]` or `tc class get [...]` dumps would
observe the curve change and are potentially breaking with this change.
v1->v2: https://lore.kernel.org/all/20231013151057.2611860-1-pctammela@mojatatu.com/
- Correct 'Fixes' tag and merge with revert (Jakub)
Cc: Christian Theune <ct@flyingcircus.io>
Cc: Budimir Markovic <markovicbudimir@gmail.com>
Fixes: b3d26c5702 ("net/sched: sch_hfsc: Ensure inner classes have fsc curve")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231017143602.3191556-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 75eefc6c59 ("tcp: tsq: add a shortcut in tcp_small_queue_check()")
we allowed to send an skb regardless of TSQ limits being hit if rtx queue
was empty or had a single skb, in order to better fill the pipe
when/if TX completions were slow.
Then later, commit 75c119afe1 ("tcp: implement rb-tree based
retransmit queue") accidentally removed the special case for
one skb in rtx queue.
Stefan Wahren reported a regression in single TCP flow throughput
using a 100Mbit fec link, starting from commit 65466904b0 ("tcp: adjust
TSO packet sizes based on min_rtt"). This last commit only made the
regression more visible, because it locked the TCP flow on a particular
behavior where TSQ prevented two skbs being pushed downstream,
adding silences on the wire between each TSO packet.
Many thanks to Stefan for his invaluable help !
Fixes: 75c119afe1 ("tcp: implement rb-tree based retransmit queue")
Link: https://lore.kernel.org/netdev/7f31ddc8-9971-495e-a1f6-819df542e0af@gmx.net/
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231017124526.4060202-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_tables_abort_release() path calls nft_set_elem_destroy() for
NFT_MSG_NEWSETELEM which releases the element, however, a reference to
the element still remains in the working copy.
Fixes: ebd032fa88 ("netfilter: nf_tables: do not remove elements if set backend implements .abort")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
This allows to remove an expired element which is not possible in other
existing set backends, this is more noticeable if gc-interval is high so
expired elements remain in the tree. On-demand gc also does not help in
this case, because this is delete element path. Return NULL if element
has expired.
Fixes: 8d8540c4f5 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.
To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: f72b948dcb ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.
2) Similarly to the F_IPSEC flag.
3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 99c6d3d20d ("pktgen: Remove brute-force printing of flags")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
errno is 0 because these hooks are called from prerouting and forward.
There is no socket that the errno would ever be propagated to.
Other netfilter modules (e.g. nf_nat, conntrack, ...) can be converted
in a similar way.
Signed-off-by: Florian Westphal <fw@strlen.de>
net_dropmonitor blames core.c:nf_hook_slow.
Add NF_DROP_REASON() helper and use it in nft_do_chain().
The helper releases the skb, so exact drop location becomes
available. Calling code will observe the NF_STOLEN verdict
instead.
Adjust nf_hook_slow so we can embed an erro value wih
NF_STOLEN verdicts, just like we do for NF_DROP.
After this, drop in nftables can be pinpointed to a drop due
to a rule or the chain policy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Same as previous change: we need to mask out the non-verdict bits, as
upcoming patches may embed an errno value in NF_STOLEN verdicts too.
NF_DROP could already do this, but not all called functions do this.
Checks that only test ret vs NF_ACCEPT are fine, the 'errno parts'
are always 0 for those.
Signed-off-by: Florian Westphal <fw@strlen.de>
This function calls helpers that can return nf-verdicts, but then
those get converted to -1/0 as thats what the caller expects.
Theoretically NF_DROP could have an errno number set in the upper 24
bits of the return value. Or any of those helpers could return
NF_STOLEN, which would result in use-after-free.
This is fine as-is, the called functions don't do this yet.
But its better to avoid possible future problems if the upcoming
patchset to add NF_DROP_REASON() support gains further users, so remove
the 0/-1 translation from the picture and pass the verdicts down to
the caller.
Signed-off-by: Florian Westphal <fw@strlen.de>
nftables trace infra must mask out the non-verdict bit parts of the
return value, else followup changes that 'return errno << 8 | NF_STOLEN'
will cause breakage.
Signed-off-by: Florian Westphal <fw@strlen.de>
These checks assume that the caller only returns NF_DROP without
any errno embedded in the upper bits.
This is fine right now, but followup patches will start to propagate
such errors to allow kfree_skb_drop_reason() in the called functions,
those would then indicate 'errno << 8 | NF_STOLEN'.
To not break things we have to mask those parts out.
Signed-off-by: Florian Westphal <fw@strlen.de>
Add a documentation for devlink_rel_nested_in_notify() describing the
devlink instance locking consequences.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to allow to access device pointer without devlink
instance lock held, make sure the device pointer is usable until
devlink_release() is called.
Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
peernet2id_alloc() allows to be called lockless with peer net pointer
obtained in RCU critical section and makes sure to return ns ID if net
namespaces is not being removed concurrently. Benefit from
read_pnet_rcu() helper addition, use it to obtain net pointer under RCU
read lock and pass it to peernet2id_alloc() to get ns ID.
Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=yHtO
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2023-10-17
1) Fix a slab-use-after-free in xfrm_policy_inexact_list_reinsert.
From Dong Chenchen.
2) Fix data-races in the xfrm interfaces dev->stats fields.
From Eric Dumazet.
3) Fix a data-race in xfrm_gen_index.
From Eric Dumazet.
4) Fix an inet6_dev refcount underflow.
From Zhang Changzhong.
5) Check the return value of pskb_trim in esp_remove_trailer
for esp4 and esp6. From Ma Ke.
6) Fix a data-race in xfrm_lookup_with_ifid.
From Eric Dumazet.
* tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix a data-race in xfrm_lookup_with_ifid()
net: ipv4: fix return value check in esp_remove_trailer
net: ipv6: fix return value check in esp_remove_trailer
xfrm6: fix inet6_dev refcount underflow problem
xfrm: fix a data-race in xfrm_gen_index()
xfrm: interface: use DEV_STATS_INC()
net: xfrm: skip policies marked as dead while reinserting policies
====================
Link: https://lore.kernel.org/r/20231017083723.1364940-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set any new attributes added to br_policy to be parsed strictly, to
prevent userspace from passing garbage.
Signed-off-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-4-32cddff87758@avm.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch added accounting and a limit for the number of
dynamically learned FDB entries per bridge. However it did not provide
means to actually configure those bounds or read back the count. This
patch does that.
Two new netlink attributes are added for the accounting and limit of
dynamically learned FDB entries:
- IFLA_BR_FDB_N_LEARNED (RO) for the number of entries accounted for
a single bridge.
- IFLA_BR_FDB_MAX_LEARNED (RW) for the configured limit of entries for
the bridge.
The new attributes are used like this:
# ip link add name br up type bridge fdb_max_learned 256
# ip link add name v1 up master br type veth peer v2
# ip link set up dev v2
# mausezahn -a rand -c 1024 v2
0.01 seconds (90877 packets per second
# bridge fdb | grep -v permanent | wc -l
256
# ip -d link show dev br
13: br: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 [...]
[...] fdb_n_learned 256 fdb_max_learned 256
Signed-off-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-3-32cddff87758@avm.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A malicious actor behind one bridge port may spam the kernel with packets
with a random source MAC address, each of which will create an FDB entry,
each of which is a dynamic allocation in the kernel.
There are roughly 2^48 different MAC addresses, further limited by the
rhashtable they are stored in to 2^31. Each entry is of the type struct
net_bridge_fdb_entry, which is currently 128 bytes big. This means the
maximum amount of memory allocated for FDB entries is 2^31 * 128B =
256GiB, which is too much for most computers.
Mitigate this by maintaining a per bridge count of those automatically
generated entries in fdb_n_learned, and a limit in fdb_max_learned. If
the limit is hit new entries are not learned anymore.
For backwards compatibility the default setting of 0 disables the limit.
User-added entries by netlink or from bridge or bridge port addresses
are never blocked and do not count towards that limit.
Introduce a new fdb entry flag BR_FDB_DYNAMIC_LEARNED to keep track of
whether an FDB entry is included in the count. The flag is enabled for
dynamically learned entries, and disabled for all other entries. This
should be equivalent to BR_FDB_ADDED_BY_USER and BR_FDB_LOCAL being unset,
but contrary to the two flags it can be toggled atomically.
Atomicity is required here, as there are multiple callers that modify the
flags, but are not under a common lock (br_fdb_update is the exception
for br->hash_lock, br_fdb_external_learn_add for RTNL).
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-2-32cddff87758@avm.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation of the following fdb limit for dynamically learned entries,
allow fdb_create to detect that the entry was added by the user. This
way it can skip applying the limit in this case.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-1-32cddff87758@avm.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We discovered from packet traces of slow loss recovery on kernels with
the default HZ=250 setting (and min_rtt < 1ms) that after reordering,
when receiving a SACKed sequence range, the RACK reordering timer was
firing after about 16ms rather than the desired value of roughly
min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer
calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels
with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the
exact same issue.
This commit fixes the TLP transmit timer and RACK reordering timer
floor calculation to more closely match the intended 2ms floor even on
kernels with HZ=250. It does this by adding in a new
TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies,
instead of the current approach of converting to jiffies and then
adding th TCP_TIMEOUT_MIN value of 2 jiffies.
Our testing has verified that on kernels with HZ=1000, as expected,
this does not produce significant changes in behavior, but on kernels
with the default HZ=250 the latency improvement can be large. For
example, our tests show that for HZ=250 kernels at low RTTs this fix
roughly halves the latency for the RACK reorder timer: instead of
mostly firing at 16ms it mostly fires at 8ms.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: bb4d991a28 ("tcp: adjust tail loss probe timeout")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few drivers were missing a xdp_do_flush() invocation after
XDP_REDIRECT.
Add three helper functions each for one of the per-CPU lists. Return
true if the per-CPU list is non-empty and flush the list.
Add xdp_do_check_flushed() which invokes each helper functions and
creates a warning if one of the functions had a non-empty list.
Hide everything behind CONFIG_DEBUG_NET.
Suggested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20231016125738.Yt79p1uF@linutronix.de
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ca5c8049f58bb933f231afd0816e30a5aaa0eddd.1697264974.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
consume_skb() doesn't walk the segment list, so segments other than
the first are leaked.
Move this skb_consume call into the loop.
Cc: Willem de Bruijn <willemb@google.com>
Fixes: b3098d32ed ("net: add skb_segment kunit test")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZS1d4wAKCRDbK58LschI
g4DSAP441CdKh8fd+wNKUSKHFbpCQ6EvocR6Nf+Sj2DFUx/w/QEA7mfju7Abqjc3
xwDEx0BuhrjMrjV5MmEpxc7lYl9XcQU=
=vuWk
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently page_pool_alloc_frag() is not supported in 32-bit
arch with 64-bit DMA because of the overlap issue between
pp_frag_count and dma_addr_upper in 'struct page' for those
arches, which seems to be quite common, see [1], which means
driver may need to handle it when using fragment API.
It is assumed that the combination of the above arch with an
address space >16TB does not exist, as all those arches have
64b equivalent, it seems logical to use the 64b version for a
system with a large address space. It is also assumed that dma
address is page aligned when we are dma mapping a page aligned
buffer, see [2].
That means we're storing 12 bits of 0 at the lower end for a
dma address, we can reuse those bits for the above arches to
support 32b+12b, which is 16TB of memory.
If we make a wrong assumption, a warning is emitted so that
user can report to us.
1. https://lore.kernel.org/all/20211117075652.58299-1-linyunsheng@huawei.com/
2. https://lore.kernel.org/all/20230818145145.4b357c89@kernel.org/
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Guillaume Tucker <guillaume.tucker@collabora.com>
CC: Matthew Wilcox <willy@infradead.org>
CC: Linux-MM <linux-mm@kvack.org>
Link: https://lore.kernel.org/r/20231013064827.61135-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix race when opening vhci device
- Avoid memcmp() out of bounds warning
- Correctly bounds check and pad HCI_MON_NEW_INDEX name
- Fix using memcmp when comparing keys
- Ignore error return for hci_devcd_register() in btrtl
- Always check if connection is alive before deleting
- Fix a refcnt underflow problem for hci_conn
-----BEGIN PGP SIGNATURE-----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=SY+z
-----END PGP SIGNATURE-----
Merge tag 'for-net-2023-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix race when opening vhci device
- Avoid memcmp() out of bounds warning
- Correctly bounds check and pad HCI_MON_NEW_INDEX name
- Fix using memcmp when comparing keys
- Ignore error return for hci_devcd_register() in btrtl
- Always check if connection is alive before deleting
- Fix a refcnt underflow problem for hci_conn
* tag 'for-net-2023-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name
Bluetooth: avoid memcmp() out of bounds warning
Bluetooth: hci_sock: fix slab oob read in create_monitor_event
Bluetooth: btrtl: Ignore error return for hci_devcd_register()
Bluetooth: hci_event: Fix coding style
Bluetooth: hci_event: Fix using memcmp when comparing keys
Bluetooth: Fix a refcnt underflow problem for hci_conn
Bluetooth: hci_sync: always check if connection is alive before deleting
Bluetooth: Reject connection with the device which has same BD_ADDR
Bluetooth: hci_event: Ignore NULL link key
Bluetooth: ISO: Fix invalid context error
Bluetooth: vhci: Fix race when opening vhci device
====================
Link: https://lore.kernel.org/r/20231014031336.1664558-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the smc_listen_work(), if smc_listen_prfx_check() failed,
the real reason: SMC_CLC_DECL_DIFFPREFIX was dropped, and
SMC_CLC_DECL_NOSMCDEV was returned.
Althrough this is also kind of SMC_CLC_DECL_NOSMCDEV, but return
the real reason is much friendly for debugging.
Fixes: e49300a6bf ("net/smc: add listen processing for SMC-Rv2")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20231012123729.29307-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When modifying netclassid, the command("echo 0x100001 > net_cls.classid")
will take more time on many threads of one process, because the process
create many fds.
for example, one process exists 28000 fds and 60000 threads, echo command
will task 45 seconds.
Now, we only consider the main process when exec "iterate_fd", and the
time is about 52 milliseconds.
Signed-off-by: Liansen Zhai <zhailiansen@kuaishou.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231012090330.29636-1-zhailiansen@kuaishou.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP pingpong threshold is 1 by default. But some applications, like SQL DB
may prefer a higher pingpong threshold to activate delayed acks in quick
ack mode for better performance.
The pingpong threshold and related code were changed to 3 in the year
2019 in:
commit 4a41f453be ("tcp: change pingpong threshold to 3")
And reverted to 1 in the year 2022 in:
commit 4d8f24eeed ("Revert "tcp: change pingpong threshold to 3"")
There is no single value that fits all applications.
Add net.ipv4.tcp_pingpong_thresh sysctl tunable, so it can be tuned for
optimal performance based on the application needs.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/1697056244-21888-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an initial user for the newly added tcf_set_drop_reason() helper to set the
drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify().
Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic
fallback indicator to mark drop locations. Where needed, such locations can be
converted to more specific codes, for example, when hitting the reclassification
limit, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the kfree_skb_reason() in sch_handle_{ingress,egress}() can only
express a basic SKB_DROP_REASON_TC_INGRESS or SKB_DROP_REASON_TC_EGRESS reason.
Victor kicked-off an initial proposal to make this more flexible by disambiguating
verdict from return code by moving the verdict into struct tcf_result and
letting tcf_classify() return a negative error. If hit, then two new drop
reasons were added in the proposal, that is SKB_DROP_REASON_TC_INGRESS_ERROR
as well as SKB_DROP_REASON_TC_EGRESS_ERROR. Further analysis of the actual
error codes would have required to attach to tcf_classify via kprobe/kretprobe
to more deeply debug skb and the returned error.
In order to make the kfree_skb_reason() in sch_handle_{ingress,egress}() more
extensible, it can be addressed in a more straight forward way, that is: Instead
of placing the verdict into struct tcf_result, we can just put the drop reason
in there, which does not require changes throughout various classful schedulers
given the existing verdict logic can stay as is.
Then, SKB_DROP_REASON_TC_ERROR{,_*} can be added to the enum skb_drop_reason
to disambiguate between an error or an intentional drop. New drop reason error
codes can be added successively to the tc code base.
For internal error locations which have not yet been annotated with a
SKB_DROP_REASON_TC_ERROR{,_*}, the fallback is SKB_DROP_REASON_TC_INGRESS and
SKB_DROP_REASON_TC_EGRESS, respectively. Generic errors could be marked with a
SKB_DROP_REASON_TC_ERROR code until they are converted to more specific ones
if it is found that they would be useful for troubleshooting.
While drop reasons have infrastructure for subsystem specific error codes which
are currently used by mac80211 and ovs, Jakub mentioned that it is preferred
for tc to use the enum skb_drop_reason core codes given it is a better fit and
currently the tooling support is better, too.
With regards to the latter:
[...] I think Alastair (bpftrace) is working on auto-prettifying enums when
bpftrace outputs maps. So we can do something like:
$ bpftrace -e 'tracepoint:skb:kfree_skb { @[args->reason] = count(); }'
Attaching 1 probe...
^C
@[SKB_DROP_REASON_TC_INGRESS]: 2
@[SKB_CONSUMED]: 34
^^^^^^^^^^^^ names!!
Auto-magically. [...]
Add a small helper tcf_set_drop_reason() which can be used to set the drop reason
into the tcf_result.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/netdev/20231006063233.74345d36@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231009092655.22025-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an RPC Call message cannot be pulled from the client, that
is a message loss, by definition. Close the connection to trigger
the client to resend.
Cc: <stable@vger.kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There is no need to take down the whole system for these assertions.
I'd rather not attempt a heroic save here, as some bug has occurred
that has left the transport data structures in an unknown state.
Just warn and then leak the left-over resources.
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This removes the need to store and update back-links in the list.
It also remove the need for the _bh version of spin_lock().
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
sp_lock is now only used to protect sp_all_threads. This isn't needed
as sp_all_threads is only manipulated through svc_set_num_threads(),
which is already serialized. Read-acccess only requires rcu_read_lock().
So no more locking is needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
