Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use a common function for fscrypt warning and error messages so that all
the messages are consistently ratelimited, include the "fscrypt:"
prefix, and include the filesystem name if applicable.
Also fix up a few of the log messages to be more descriptive.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now ->max_namelen() is only called to limit the filename length when
adding NUL padding, and only for real filenames -- not symlink targets.
It also didn't give the correct length for symlink targets anyway since
it forgot to subtract 'sizeof(struct fscrypt_symlink_data)'.
Thus, change ->max_namelen from a function to a simple 'unsigned int'
that gives the filesystem's maximum filename length.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fname_decrypt() is validating that the encrypted filename is nonempty.
However, earlier a stronger precondition was already enforced: the
encrypted filename must be at least 16 (FS_CRYPTO_BLOCK_SIZE) bytes.
Drop the redundant check for an empty filename.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fname_decrypt() returns an error if the input filename is longer than
the inode's ->max_namelen() as given by the filesystem. But, this
doesn't actually make sense because the filesystem provided the input
filename in the first place, where it was subject to the filesystem's
limits. And fname_decrypt() has no internal limit itself.
Thus, remove this unnecessary check.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In fscrypt_setup_filename(), remove the unnecessary check for
fscrypt_get_encryption_info() returning EOPNOTSUPP. There's no reason
to handle this error differently from any other. I think there may have
been some confusion because the "notsupp" version of
fscrypt_get_encryption_info() returns EOPNOTSUPP -- but that's not
applicable from inside fs/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
skcipher_request_alloc() can only fail due to lack of memory, and in
that case the memory allocator will have already printed a detailed
error message. Thus, remove the redundant error messages from fscrypt.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystems don't need fscrypt_fname_encrypted_size() anymore, so
unexport it and move it to fscrypt_private.h.
We also never calculate the encrypted size of a filename without having
the fscrypt_info present since it is needed to know the amount of
NUL-padding which is determined by the encryption policy, and also we
will always truncate the NUL-padding to the maximum filename length.
Therefore, also make fscrypt_fname_encrypted_size() assume that the
fscrypt_info is present, and make it truncate the returned length to the
specified max_len.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously fscrypt_fname_alloc_buffer() was used to allocate buffers for
both presented (decrypted or encoded) and encrypted filenames. That was
confusing, because it had to allocate the worst-case size for either,
e.g. including NUL-padding even when it was meaningless.
But now that fscrypt_setup_filename() no longer calls it, it is only
used in the ->get_link() and ->readdir() paths, which specifically want
a buffer for presented filenames. Therefore, switch the behavior over
to allocating the buffer for presented filenames only.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, when encrypting a filename (either a real filename or a
symlink target) we calculate the amount of NUL-padding twice: once
before encryption and once during encryption in fname_encrypt(). It is
needed before encryption to allocate the needed buffer size as well as
calculate the size the symlink target will take up on-disk before
creating the symlink inode. Calculating the size during encryption as
well is redundant.
Remove this redundancy by always calculating the exact size beforehand,
and making fname_encrypt() just add as much NUL padding as is needed to
fill the output buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_fname_usr_to_disk() sounded very generic but was actually only
used to encrypt symlinks. Remove it now that all filesystems have been
switched over to fscrypt_encrypt_symlink().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, filesystems supporting fscrypt need to implement some tricky
logic when creating encrypted symlinks, including handling a peculiar
on-disk format (struct fscrypt_symlink_data) and correctly calculating
the size of the encrypted symlink. Introduce helper functions to make
things a bit easier:
- fscrypt_prepare_symlink() computes and validates the size the symlink
target will require on-disk.
- fscrypt_encrypt_symlink() creates the encrypted target if needed.
The new helpers actually fix some subtle bugs. First, when checking
whether the symlink target was too long, filesystems didn't account for
the fact that the NUL padding is meant to be truncated if it would cause
the maximum length to be exceeded, as is done for filenames in
directories. Consequently users would receive ENAMETOOLONG when
creating symlinks close to what is supposed to be the maximum length.
For example, with EXT4 with a 4K block size, the maximum symlink target
length in an encrypted directory is supposed to be 4093 bytes (in
comparison to 4095 in an unencrypted directory), but in
FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted.
Second, symlink targets of "." and ".." were not being encrypted, even
though they should be, as these names are special in *directory entries*
but not in symlink targets. Fortunately, we can fix this simply by
starting to encrypt them, as old kernels already accept them in
encrypted form.
Third, the output string length the filesystems were providing when
doing the actual encryption was incorrect, as it was forgotten to
exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this
bug didn't make a difference.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt.h included way too many other headers, given that it is included
by filesystems both with and without encryption support. Trim down the
includes list by moving the needed includes into more appropriate
places, and removing the unneeded ones.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Only fs/crypto/fname.c cares about treating the "." and ".." filenames
specially with regards to encryption, so move fscrypt_is_dot_dotdot()
from fscrypt.h to there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAloI8AUACgkQ8vlZVpUN
gaMdjgf8CCW7UhPjoZYwF8sUNtAaX9+JZT1maOcXUhpJ3vRQiRn+AzRH6yBYMm79
+NZBwVlk4dlEe55Wh4yFIStMAstqzCrke4C9CSbExjgHNsJdU4znyYuLRMbLfyO0
6c4NObiAIKJdW1/te1aN90keGC6min8pBZot+FqZsRr+Kq2+IOtM43JAv7efOLev
v3LCjUf9JKxatoB8tgw4AJRa1p18p7D2APWTG05VlFq63TjhVIYNvvwcQlizLwGY
cuEq3X59FbFdX06fJnucujU3WP3ES4/3rhufBK4NNaec5e5dbnH2KlAx7J5SyMIZ
0qUFB/dmXDSb3gsfScSGo1F71Ad0CA==
=asAm
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Lots of cleanups, mostly courtesy by Eric Biggers"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: lock mutex before checking for bounce page pool
fscrypt: add a documentation file for filesystem-level encryption
ext4: switch to fscrypt_prepare_setattr()
ext4: switch to fscrypt_prepare_lookup()
ext4: switch to fscrypt_prepare_rename()
ext4: switch to fscrypt_prepare_link()
ext4: switch to fscrypt_file_open()
fscrypt: new helper function - fscrypt_prepare_setattr()
fscrypt: new helper function - fscrypt_prepare_lookup()
fscrypt: new helper function - fscrypt_prepare_rename()
fscrypt: new helper function - fscrypt_prepare_link()
fscrypt: new helper function - fscrypt_file_open()
fscrypt: new helper function - fscrypt_require_key()
fscrypt: remove unneeded empty fscrypt_operations structs
fscrypt: remove ->is_encrypted()
fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED()
fs, fscrypt: add an S_ENCRYPTED inode flag
fscrypt: clean up include file mess
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
fscrypt starts several async. crypto ops and waiting for them to
complete. Move it over to generic code doing the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IS_ENCRYPTED() now gives the same information as
i_sb->s_cop->is_encrypted() but is more efficient, since IS_ENCRYPTED()
is just a simple flag check. Prepare to remove ->is_encrypted() by
switching all callers to IS_ENCRYPTED().
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_free_filename() only needs to do a kfree() of crypto_buf.name,
which works well as an inline function. We can skip setting the various
pointers to NULL, since no user cares about it (the name is always freed
just before it goes out of scope).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Gstir <david@sigma-star.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Introduce a helper function fscrypt_match_name() which tests whether a
fscrypt_name matches a directory entry. Also clean up the magic numbers
and document things properly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When accessing an encrypted directory without the key, userspace must
operate on filenames derived from the ciphertext names, which contain
arbitrary bytes. Since we must support filenames as long as NAME_MAX,
we can't always just base64-encode the ciphertext, since that may make
it too long. Currently, this is solved by presenting long names in an
abbreviated form containing any needed filesystem-specific hashes (e.g.
to identify a directory block), then the last 16 bytes of ciphertext.
This needs to be sufficient to identify the actual name on lookup.
However, there is a bug. It seems to have been assumed that due to the
use of a CBC (ciphertext block chaining)-based encryption mode, the last
16 bytes (i.e. the AES block size) of ciphertext would depend on the
full plaintext, preventing collisions. However, we actually use CBC
with ciphertext stealing (CTS), which handles the last two blocks
specially, causing them to appear "flipped". Thus, it's actually the
second-to-last block which depends on the full plaintext.
This caused long filenames that differ only near the end of their
plaintexts to, when observed without the key, point to the wrong inode
and be undeletable. For example, with ext4:
# echo pass | e4crypt add_key -p 16 edir/
# seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch
# find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l
100000
# sync
# echo 3 > /proc/sys/vm/drop_caches
# keyctl new_session
# find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l
2004
# rm -rf edir/
rm: cannot remove 'edir/_A7nNFi3rhkEQlJ6P,hdzluhODKOeWx5V': Structure needs cleaning
...
To fix this, when presenting long encrypted filenames, encode the
second-to-last block of ciphertext rather than the last 16 bytes.
Although it would be nice to solve this without depending on a specific
encryption mode, that would mean doing a cryptographic hash like SHA-256
which would be much less efficient. This way is sufficient for now, and
it's still compatible with encryption modes like HEH which are strong
pseudorandom permutations. Also, changing the presented names is still
allowed at any time because they are only provided to allow applications
to do things like delete encrypted directories. They're not designed to
be used to persistently identify files --- which would be hard to do
anyway, given that they're encrypted after all.
For ease of backports, this patch only makes the minimal fix to both
ext4 and f2fs. It leaves ubifs as-is, since ubifs doesn't compare the
ciphertext block yet. Follow-on patches will clean things up properly
and make the filesystems use a shared helper function.
Fixes: 5de0b4d0cd ("ext4 crypto: simplify and speed up filename encryption")
Reported-by: Gwendal Grignou <gwendal@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystem encryption ostensibly supported revoking a keyring key that
had been used to "unlock" encrypted files, causing those files to become
"locked" again. This was, however, buggy for several reasons, the most
severe of which was that when key revocation happened to be detected for
an inode, its fscrypt_info was immediately freed, even while other
threads could be using it for encryption or decryption concurrently.
This could be exploited to crash the kernel or worse.
This patch fixes the use-after-free by removing the code which detects
the keyring key having been revoked, invalidated, or expired. Instead,
an encrypted inode that is "unlocked" now simply remains unlocked until
it is evicted from memory. Note that this is no worse than the case for
block device-level encryption, e.g. dm-crypt, and it still remains
possible for a privileged user to evict unused pages, inodes, and
dentries by running 'sync; echo 3 > /proc/sys/vm/drop_caches', or by
simply unmounting the filesystem. In fact, one of those actions was
already needed anyway for key revocation to work even somewhat sanely.
This change is not expected to break any applications.
In the future I'd like to implement a real API for fscrypt key
revocation that interacts sanely with ongoing filesystem operations ---
waiting for existing operations to complete and blocking new operations,
and invalidating and sanitizing key material and plaintext from the VFS
caches. But this is a hard problem, and for now this bug must be fixed.
This bug affected almost all versions of ext4, f2fs, and ubifs
encryption, and it was potentially reachable in any kernel configured
with encryption support (CONFIG_EXT4_ENCRYPTION=y,
CONFIG_EXT4_FS_ENCRYPTION=y, CONFIG_F2FS_FS_ENCRYPTION=y, or
CONFIG_UBIFS_FS_ENCRYPTION=y). Note that older kernels did not use the
shared fs/crypto/ code, but due to the potential security implications
of this bug, it may still be worthwhile to backport this fix to them.
Fixes: b7236e21d5 ("ext4 crypto: reorganize how we store keys in the inode")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Michael Halcrow <mhalcrow@google.com>
As part of an effort to clean up fscrypt-related error codes, make
attempting to create a file in an encrypted directory that hasn't been
"unlocked" fail with ENOKEY. Previously, several error codes were used
for this case, including ENOENT, EACCES, and EPERM, and they were not
consistent between and within filesystems. ENOKEY is a better choice
because it expresses that the failure is due to lacking the encryption
key. It also matches the error code returned when trying to open an
encrypted regular file without the key.
I am not aware of any users who might be relying on the previous
inconsistent error codes, which were never documented anywhere.
This failure case will be exercised by an xfstest.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To avoid namespace collisions, rename get_crypt_info() to
fscrypt_get_crypt_info(). The function is only used inside the
fs/crypto directory, so declare it in the new header file,
fscrypt_private.h.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page. For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename. Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.
This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some filesystems, such as UBIFS, maintain a const pointer for struct
inode.
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Several filename crypto functions: fname_decrypt(),
fscrypt_fname_disk_to_usr(), and fscrypt_fname_usr_to_disk(), returned
the output length on success or -errno on failure. However, the output
length was redundant with the value written to 'oname->len'. It is also
potentially error-prone to make callers have to check for '< 0' instead
of '!= 0'.
Therefore, make these functions return 0 instead of a length, and make
the callers who cared about the return value being a length use
'oname->len' instead. For consistency also make other callers check for
a nonzero result rather than a negative result.
This change also fixes the inconsistency of fname_encrypt() actually
already returning 0 on success, not a length like the other filename
crypto functions and as documented in its function comment.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
fscrypt_complete() was used only for data pages, not for all
encryption/decryption. Rename it to page_crypt_complete().
dir_crypt_complete() was used for filename encryption/decryption for
both directory entries and symbolic links. Rename it to
fname_crypt_complete().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch removes some #includes that are clearly not needed, such as a
reference to ecryptfs, which is unrelated to the new filesystem
encryption code.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull f2fs updates from Jaegeuk Kim:
"New Features:
- uplift filesystem encryption into fs/crypto/
- give sysfs entries to control memroy consumption
Enhancements:
- aio performance by preallocating blocks in ->write_iter
- use writepages lock for only WB_SYNC_ALL
- avoid redundant inline_data conversion
- enhance forground GC
- use wait_for_stable_page as possible
- speed up SEEK_DATA and fiiemap
Bug Fixes:
- corner case in terms of -ENOSPC for inline_data
- hung task caused by long latency in shrinker
- corruption between atomic write and f2fs_trace_pid
- avoid garbage lengths in dentries
- revoke atomicly written pages if an error occurs
In addition, there are various minor bug fixes and clean-ups"
* tag 'for-f2fs-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
f2fs: submit node page write bios when really required
f2fs: add missing argument to f2fs_setxattr stub
f2fs: fix to avoid unneeded unlock_new_inode
f2fs: clean up opened code with f2fs_update_dentry
f2fs: declare static functions
f2fs: use cryptoapi crc32 functions
f2fs: modify the readahead method in ra_node_page()
f2fs crypto: sync ext4_lookup and ext4_file_open
fs crypto: move per-file encryption from f2fs tree to fs/crypto
f2fs: mutex can't be used by down_write_nest_lock()
f2fs: recovery missing dot dentries in root directory
f2fs: fix to avoid deadlock when merging inline data
f2fs: introduce f2fs_flush_merged_bios for cleanup
f2fs: introduce f2fs_update_data_blkaddr for cleanup
f2fs crypto: fix incorrect positioning for GCing encrypted data page
f2fs: fix incorrect upper bound when iterating inode mapping tree
f2fs: avoid hungtask problem caused by losing wake_up
f2fs: trace old block address for CoWed page
f2fs: try to flush inode after merging inline data
f2fs: show more info about superblock recovery
...
This patch adds the renamed functions moved from the f2fs crypto files.
1. definitions for per-file encryption used by ext4 and f2fs.
2. crypto.c for encrypt/decrypt functions
a. IO preparation:
- fscrypt_get_ctx / fscrypt_release_ctx
b. before IOs:
- fscrypt_encrypt_page
- fscrypt_decrypt_page
- fscrypt_zeroout_range
c. after IOs:
- fscrypt_decrypt_bio_pages
- fscrypt_pullback_bio_page
- fscrypt_restore_control_page
3. policy.c supporting context management.
a. For ioctls:
- fscrypt_process_policy
- fscrypt_get_policy
b. For context permission
- fscrypt_has_permitted_context
- fscrypt_inherit_context
4. keyinfo.c to handle permissions
- fscrypt_get_encryption_info
- fscrypt_free_encryption_info
5. fname.c to support filename encryption
a. general wrapper functions
- fscrypt_fname_disk_to_usr
- fscrypt_fname_usr_to_disk
- fscrypt_setup_filename
- fscrypt_free_filename
b. specific filename handling functions
- fscrypt_fname_alloc_buffer
- fscrypt_fname_free_buffer
6. Makefile and Kconfig
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
