flush_range() handle both the MMU_FTR_HPTE_TABLE case and
the other case.
The non MMU_FTR_HPTE_TABLE case is trivial as it is only a call
to _tlbie()/_tlbia() which is not worth a dedicated function.
Make flush_range() a hash specific and call it from tlbflush.h based
on mmu_has_feature(MMU_FTR_HPTE_TABLE).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/132ab19aae52abc8e06ab524ec86d4229b5b9c3d.1603348103.git.christophe.leroy@csgroup.eu
flush_tlb_mm() and flush_tlb_page() handle both the MMU_FTR_HPTE_TABLE
case and the other case.
The non MMU_FTR_HPTE_TABLE case is trivial as it is only a call
to _tlbie()/_tlbia() which is not worth a dedicated function.
Make flush_tlb_mm() and flush_tlb_page() hash specific and call
them from tlbflush.h based on mmu_has_feature(MMU_FTR_HPTE_TABLE).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/11e932ded41ba6d9b251d89b7afa33cc060d3aa4.1603348103.git.christophe.leroy@csgroup.eu
_tlbie() and _tlbia() are used only on 603 cores while the
other functions are used only on cores having a hash table.
Move them into a new file named nohash_low.S
Add mmu_hash_lock var is used by both, it needs to go
in a common file.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9a265b1b17a64153463d361280cb4b43eb1266a4.1603348103.git.christophe.leroy@csgroup.eu
We now have an early hash table on hash MMU, so no need to check
Hash var to know if the Hash table is set of not.
Use mmu_has_feature(MMU_FTR_HPTE_TABLE) instead. This will allow
optimisation via jump_label.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f1766631a9e014b6433f1a3c12c726ddfce34220.1603348103.git.christophe.leroy@csgroup.eu
Commit bd59380c5b ("powerpc/rtas: Restrict RTAS requests from userspace")
introduced the following error when invoking the errinjct userspace
tool:
[root@ltcalpine2-lp5 librtas]# errinjct open
[327884.071171] sys_rtas: RTAS call blocked - exploit attempt?
[327884.071186] sys_rtas: token=0x26, nargs=0 (called by errinjct)
errinjct: Could not open RTAS error injection facility
errinjct: librtas: open: Unexpected I/O error
The entry for ibm,open-errinjct in rtas_filter array has a typo where
the "j" is omitted in the rtas call name. After fixing this typo the
errinjct tool functions again as expected.
[root@ltcalpine2-lp5 linux]# errinjct open
RTAS error injection facility open, token = 1
Fixes: bd59380c5b ("powerpc/rtas: Restrict RTAS requests from userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201208195434.8289-1-tyreld@linux.ibm.com
low_sleep_handler() can't restore the context from standard
stack because the stack can hardly be accessed with MMU OFF.
Store everything in a global storage area instead of storing
a pointer to the stack in that global storage area.
To avoid a complete churn of the function, still use r1 as
the pointer to the storage area during restore.
Fixes: cd08f109e2 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Reported-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e3e0d8042a3ba75cb4a9546c19c408b5b5b28994.1607404931.git.christophe.leroy@csgroup.eu
In pseries_devicetree_update(), with each call to ibm,update-nodes the
partition firmware communicates the node to be deleted or updated by
placing its phandle in the work buffer. Each of delete_dt_node(),
update_dt_node(), and add_dt_node() have duplicate lookups using the
phandle value and corresponding refcount management.
Move the lookup and of_node_put() into pseries_devicetree_update(),
and emit a warning on any failed lookups.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-29-nathanl@linux.ibm.com
The pseries hibernate code no longer calls into the original
join/suspend code in kernel/rtas.c, so pseries_prepare_late() and
related code don't accomplish anything now.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-27-nathanl@linux.ibm.com
The pseries hibernate code calls post_mobility_fixup() which is sort
of a dumping ground of fixups that need to run after resuming from
suspend regardless of whether suspend was a hibernation or a
migration. Calling post_mobility_fixup() from
pseries_suspend_enable_irqs() runs this code early in resume with
devices suspended and only one CPU up, while the much more commonly
used migration case runs these fixups in a more typical process
context.
Call post_mobility_fixup() after the suspend core returns a success
status to the hibernate sysfs store method and remove
pseries_suspend_enable_irqs().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-26-nathanl@linux.ibm.com
Partitions with cache nodes in the device tree can encounter the
following warning on resume:
CPU 0 already accounted in PowerPC,POWER9@0(Data)
WARNING: CPU: 0 PID: 3177 at arch/powerpc/kernel/cacheinfo.c:197 cacheinfo_cpu_online+0x640/0x820
These calls to cacheinfo_cpu_offline/online have been redundant since
commit e610a466d1 ("powerpc/pseries/mobility: rebuild cacheinfo
hierarchy post-migration").
Fixes: e610a466d1 ("powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-25-nathanl@linux.ibm.com
rtas_suspend_last_cpu() and related code perform a lot of work that
isn't relevant to the hibernation workflow. All other CPUs are offline
when called so there is no need to place them in H_JOIN or prod them
on resume, nor is there need for retries or operations on shared
state.
Call the rtas_ibm_suspend_me() wrapper function directly from
pseries_suspend_enter() instead of using rtas_suspend_last_cpu().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-23-nathanl@linux.ibm.com
rtas_suspend_cpu() no longer has users; remove it and
__rtas_suspend_cpu() which now becomes unused as well.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-22-nathanl@linux.ibm.com
Since commit 48f6e7f6d9 ("powerpc/pseries: remove cede offline state
for CPUs"), ppc_md.suspend_disable_cpu() is no longer used and all
CPUs (save one) are placed into true offline state as opposed to
H_JOIN. So pseries_suspend_cpu() is effectively unused; remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-20-nathanl@linux.ibm.com
There is no need for the stream id to be a file-global variable; pass
it from hibernate_store() to pseries_suspend_begin() for the
H_VASI_STATE call.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-19-nathanl@linux.ibm.com
There are three ways pseries_suspend_begin() can be reached:
1. When "mem" is written to /sys/power/state:
kobj_attr_store()
-> state_store()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This never works because there is no way to supply a valid stream id
using this interface, and H_VASI_STATE is called with a stream id of
zero. So this call path is useless at best.
2. When a stream id is written to /sys/devices/system/power/hibernate.
pseries_suspend_begin() is polled directly from store_hibernate()
until the stream is in the "Suspending" state (i.e. the platform is
ready for the OS to suspend execution):
dev_attr_store()
-> store_hibernate()
-> pseries_suspend_begin()
3. When a stream id is written to /sys/devices/system/power/hibernate
(continued). After #2, pseries_suspend_begin() is called once again
from the pm core:
dev_attr_store()
-> store_hibernate()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This is redundant because the VASI suspend state is already known to
be Suspending.
The begin() callback of platform_suspend_ops is optional, so we can
simply remove that assignment with no loss of function.
Fixes: 32d8ad4e62 ("powerpc/pseries: Partition hibernation support")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-18-nathanl@linux.ibm.com
rtas_ibm_suspend_me_unsafe() is now unused; remove it and
rtas_percpu_suspend_me() which becomes unused as a result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-17-nathanl@linux.ibm.com
sys_rtas() cannot call ibm,suspend-me directly in the same way it
handles other inputs. Instead it must dispatch the request to code
that can first perform the H_JOIN sequence before any call to
ibm,suspend-me can succeed. Over time kernel/rtas.c has accreted a fair
amount of platform-specific code to implement this.
Since a different, more robust implementation of the suspend sequence
is now in the pseries platform code, we want to dispatch the request
there.
Note that invoking ibm,suspend-me via the RTAS syscall is all but
deprecated; this change preserves ABI compatibility for old programs
while providing to them the benefit of the new partition suspend
implementation. This is a behavior change in that the kernel performs
the device tree update and firmware activation before returning, but
experimentation indicates this is tolerated fine by legacy user space.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-16-nathanl@linux.ibm.com
This is a mitigation for the relatively rare occurrence where a
virtual IOA can be in a transient state that prevents the
suspend/migration from succeeding, resulting in an error from
ibm,suspend-me.
If the join/suspend sequence returns an error, it is acceptable to
retry as long as the VASI suspend session state is still
"Suspending" (i.e. the platform is still waiting for the OS to
suspend).
Retry a few times on suspend failure while this condition holds,
progressively increasing the delay between attempts. We don't want to
retry indefinitey because firmware emits an error log event on each
unsuccessful attempt.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-15-nathanl@linux.ibm.com
If we're returning an error to user space, use H_VASI_SIGNAL to send a
cancellation request to the platform. This isn't strictly required but
it communicates that Linux will not attempt to complete the suspend,
which allows the various entities involved to promptly end the
operation in progress.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-14-nathanl@linux.ibm.com
The partition suspend sequence as specified in the platform
architecture requires that all active processor threads call
H_JOIN, which:
- suspends the calling thread until it is the target of
an H_PROD; or
- immediately returns H_CONTINUE, if the calling thread is the last to
call H_JOIN. This thread is expected to call ibm,suspend-me to
completely suspend the partition.
Upon returning from ibm,suspend-me the calling thread must wake all
others using H_PROD.
rtas_ibm_suspend_me_unsafe() uses on_each_cpu() to implement this
protocol, but because of its synchronizing nature this is susceptible
to deadlock versus users of stop_machine() or other callers of
on_each_cpu().
Not only is stop_machine() intended for use cases like this, it
handles error propagation and allows us to keep the data shared
between CPUs minimal: a single atomic counter which ensures exactly
one CPU will wake the others from their joined states.
Switch the migration code to use stop_machine() and a less complex
local implementation of the H_JOIN/ibm,suspend-me logic, which
carries additional benefits:
- more informative error reporting, appropriately ratelimited
- resets the lockup detector / watchdog on resume to prevent lockup
warnings when the OS has been suspended for a time exceeding the
threshold.
Fixes: 91dc182ca6 ("[PATCH] powerpc: special-case ibm,suspend-me RTAS call")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-13-nathanl@linux.ibm.com
The behavior of rtas_ibm_suspend_me_unsafe() is to return -EAGAIN to
the caller until the specified VASI suspend session state makes the
transition from H_VASI_ENABLED to H_VASI_SUSPENDING. In the interest
of separating concerns to prepare for a new implementation of the
join/suspend sequence, extract VASI session polling logic into a
couple of local functions. Waiting for the session state to reach
H_VASI_SUSPENDING before calling rtas_ibm_suspend_me_unsafe() ensures
that we will never get an EAGAIN result necessitating a retry. No
user-visible change in behavior is intended.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-12-nathanl@linux.ibm.com
It's incorrect to abort post-suspend processing if
ibm,activate-firmware isn't available. Use rtas_activate_firmware(),
which logs this condition appropriately and allows us to proceed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-11-nathanl@linux.ibm.com
- Convert printk(KERN_ERR) to pr_err().
- Include errno in property update failure message.
- Remove reference to "Post-mobility" from device tree update message:
with pr_err() it will have a "mobility:" prefix.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-10-nathanl@linux.ibm.com
Treat the absence of the ibm,update-nodes function as benign instead
of reporting an error. If the platform does not provide that facility,
it's not a problem for Linux.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-8-nathanl@linux.ibm.com
H_VASI_SIGNAL can be used by a partition to request cancellation of
its migration. To be used in future changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-7-nathanl@linux.ibm.com
Provide a documented wrapper function for the ibm,activate-firmware
service, which must be called after a partition migration or
hibernation.
If the function is absent or the call fails, the OS will continue to
run normally with the current firmware, so there is no need to perform
any recovery. Just log it and continue.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-6-nathanl@linux.ibm.com
Now that the name is available, provide a simple wrapper for
ibm,suspend-me which returns both a Linux errno and optionally the
actual RTAS status to the caller.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-5-nathanl@linux.ibm.com
The pseries partition suspend sequence requires that all active CPUs
call H_JOIN, which suspends all but one of them with interrupts
disabled. The "chosen" CPU is then to call ibm,suspend-me to complete
the suspend. Upon returning from ibm,suspend-me, the chosen CPU is to
use H_PROD to wake the joined CPUs.
Using on_each_cpu() for this, as rtas_ibm_suspend_me() does to
implement partition migration, is susceptible to deadlock with other
users of on_each_cpu() and with users of stop_machine APIs. The
callback passed to on_each_cpu() is not allowed to synchronize with
other CPUs in the way it is used here.
Complicating the fix is the fact that rtas_ibm_suspend_me() also
occupies the function name that should be used to provide a more
conventional wrapper for ibm,suspend-me. Rename rtas_ibm_suspend_me()
to rtas_ibm_suspend_me_unsafe() to free up the name and indicate that
it should not gain users.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-4-nathanl@linux.ibm.com
We don't completely account for the possible return codes for
ibm,suspend-me. Add definitions for these.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-3-nathanl@linux.ibm.com
While drmgr has had work in some areas to make its RTAS syscall
interactions endian-neutral, its code for performing partition
migration via the syscall has never worked on LE. While it is able to
complete ibm,suspend-me successfully, it crashes when attempting the
subsequent ibm,update-nodes call.
drmgr is the only known (or plausible) user of ibm,suspend-me,
ibm,update-nodes, and ibm,update-properties, so allow them only in
big-endian configurations.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-2-nathanl@linux.ibm.com
This partially reverts commit eb232b1624 ("powerpc/book3s64/kuap: Improve
error reporting with KUAP") and update the fault handler to print
[ 55.022514] Kernel attempted to access user page (7e6725b70000) - exploit attempt? (uid: 0)
[ 55.022528] BUG: Unable to handle kernel data access on read at 0x7e6725b70000
[ 55.022533] Faulting instruction address: 0xc000000000e8b9bc
[ 55.022540] Oops: Kernel access of bad area, sig: 11 [#1]
....
when the kernel access userspace address without unlocking AMR.
bad_kuap_fault() is added as part of commit 5e5be3aed2 ("powerpc/mm: Detect
bad KUAP faults") to catch userspace access incorrectly blocked by AMR. Hence
retain the full stack dump there even with hash translation. Also, add a comment
explaining the difference between hash and radix.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201208031539.84878-1-aneesh.kumar@linux.ibm.com
On Power9, CIABR is lost after idle. This means that instruction
breakpoints set by xmon which use CIABR do not work. Fix this by
restoring CIABR after idle.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207010519.15597-2-jniethe5@gmail.com
The value in CIABR persists across kexec which can lead to unintended
results when the new kernel hits the old kernel's breakpoint. For
example:
0:mon> bi $loadavg_proc_show
0:mon> b
type address
1 inst c000000000519060 loadavg_proc_show+0x0/0x130
0:mon> x
$ kexec -l /mnt/vmlinux --initrd=/mnt/rootfs.cpio.gz --append='xmon=off'
$ kexec -e
$ cat /proc/loadavg
Trace/breakpoint trap
Make sure CIABR is cleared so this does not happen.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207010519.15597-1-jniethe5@gmail.com
There is no defconfig selecting CONFIG_E200, and no platform.
e200 is an earlier version of booke, a predecessor of e500,
with some particularities like an unified cache instead of both an
instruction cache and a data cache.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/34ebc3ba2c768d97f363bd5f2deea2356e9ae127.1605589460.git.christophe.leroy@csgroup.eu
In several places, inline assembly uses the "%Un" modifier
to enable the use of instruction with update form addressing,
but the associated "<>" constraint is missing.
As mentioned in previous patch, this fails with gcc 4.9, so
"<>" can't be used directly.
Use UPD_CONSTR macro everywhere %Un modifier is used.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62eab5ca595485c192de1765bdac099f633a21d0.1603358942.git.christophe.leroy@csgroup.eu
