Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-07-11 (net/intel)
This series contains updates to most Intel network drivers.
Tony removes MODULE_AUTHOR from drivers containing the entry.
Simon Horman corrects a kdoc entry for i40e.
Pawel adds implementation for devlink param "local_forwarding" on ice.
Michal removes unneeded call, and code, for eswitch rebuild for ice.
Sasha removed a no longer used field from igc.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Remove the internal 'eee_advert' field
ice: remove eswitch rebuild
ice: Add support for devlink local_forwarding param
i40e: correct i40e_addr_to_hkey() name in kdoc
net: intel: Remove MODULE_AUTHORs
====================
Link: https://patch.msgid.link/20240711201932.2019925-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for driver-specific devlink local_forwarding param.
Supported values are "enabled", "disabled" and "prioritized".
Default configuration is set to "enabled".
Add documentation in networking/devlink/ice.rst.
In previous generations of Intel NICs the transmit scheduler was only
limited by PCIe bandwidth when scheduling/assigning hairpin-bandwidth
between VFs. Changes to E810 HW design introduced scheduler limitation,
so that available hairpin-bandwidth is bound to external port speed.
In order to address this limitation and enable NFV services such as
"service chaining" a knob to adjust the scheduler config was created.
Driver can send a configuration message to the FW over admin queue and
internal FW logic will reconfigure HW to prioritize and add more BW to
VF to VF traffic. An end result, for example, 10G port will no longer
limit hairpin-bandwidth to 10G and much higher speeds can be achieved.
Devlink local_forwarding param set to "prioritized" enables higher
hairpin-bandwitdh on related PFs. Configuration is applicable only to
8x10G and 4x25G cards.
Changing local_forwarding configuration will trigger CORER reset in
order to take effect.
Example command to change current value:
devlink dev param set pci/0000:b2:00.3 name local_forwarding \
value prioritized \
cmode runtime
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Correct the example to match the help text from the devlink utility.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing method of reserving unicast filter count leads to wasted
MCAM entries if the functionality is not used or fewer entries are used.
Furthermore, the amount of MCAM entries differs amongst Octeon SoCs.
We implemented a means to adjust the UC filter count via devlink,
allowing for better use of MCAM entries across Netdev apps.
commands:
To get the current unicast filter count
# devlink dev param show pci/0002:02:00.0 name unicast_filter_count
To change/set the unicast filter count
# devlink dev param set pci/0002:02:00.0 name unicast_filter_count
value 5 cmode runtime
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
New driver specific parameter 'tx_scheduling_layers' was introduced.
Describe parameter in the documentation.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support to query scc version by devlink info for device V3.
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20240410125354.2177067-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer NIC will introduce a new part number, now add it
into devlink device info.
This patch also updates the information of "board.id" in
nfp.rst to match the devlink-info.rst.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add definition and documentation for the new generic
info "board.part_number".
The new one is for part number specific use, and board.id
is modified to match the documentation in devlink-info.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many devices send event notifications for the IO queues,
such as tx and rx queues, through event queues.
Enable a privileged owner, such as a hypervisor PF, to set the number
of IO event queues for the VF and SF during the provisioning stage.
example:
Get maximum IO event queues of the VF device::
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 10
Set maximum IO event queues of the VF device::
$ devlink port function set pci/0000:06:00.0/2 max_io_eqs 32
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 32
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide devlink documentation for three eswitch attributes:
mode, inline-mode, and encap-mode.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240325181228.6244-1-witu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Command example string is not read as command.
Fix command annotation.
Fixes: a8ce7b26a5 ("devlink: Expose port function commands to control migratable")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206161717.466653-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix counter name in documentation of mlx5 vnic health reporter diagnose
output: total_error_queues.
While here fix alignment in the documentation file of another counter,
comp_eq_overrun, as it should have its own line and not be part of
another counter's description.
Example:
$ devlink health diagnose pci/0000:00:04.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add a note when using esw_port_metadata. The parameter has runtime
mode but setting it does not take effect immediately. Setting it must
happen in legacy mode, and the port metadata takes effects when the
switchdev mode is enabled.
Disable eswitch port metadata::
$ devlink dev param set pci/0000:06:00.0 name esw_port_metadata value \
false cmode runtime
Change eswitch mode to switchdev mode where after choosing the metadata value::
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Note that other mlx5 devlink runtime parameters, esw_multiport and
flow_steering_mode, do not have this limitation.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If Clock Generation Unit is present on NIC board user shall know its
details.
Provide the devlink info callback with a new:
- fixed type object (cgu.id) indicating hardware variant of onboard CGU,
- running type object (fw.cgu) consisting of CGU id, config and firmware
versions.
These information shall be known for debugging purposes.
Test (on NIC board with CGU)
$ devlink dev info <bus_name>/<dev_name> | grep cgu
cgu.id 36
fw.cgu 8032.16973825.6021
Test (on NIC board without CGU)
$ devlink dev info <bus_name>/<dev_name> | grep cgu -c
0
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Be more explicit about devlink entities that may stay and that have to
be removed during reload reinit action.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Align devlink info versions with ice driver so change 'fw.mgmt'
version to be 2-digit version [major.minor], add 'fw.mgmt.build'
that reports mgmt firmware build number and use '"fw.psid.api'
for NVM format version instead of incorrect '"fw.psid'.
Additionally add missing i40e devlink documentation.
Fixes: 5a423552e0 ("i40e: Add handler for devlink .info_get")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231018123558.552453-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a note describing the locking order of taking RTNL lock with devlink
instance lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a part talking about nested devlink instances describing
the helpers and locking ordering.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Work from Carlos Bilbao to integrate rustdoc output into the generated
HTML documentation. This took some work to figure out how to do it
without slowing the docs build and without creating people who don't have
Rust installed, but Carlos got there.
- Move the loongarch and mips architecture documentation under
Documentation/arch/.
- Some more maintainer documentation from Jakub
...plus the usual assortment of updates, translations, and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
/ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
=C3Uv
-----END PGP SIGNATURE-----
Merge tag 'docs-6.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
Expose port function commands to enable / disable IPsec packet offloads,
this is used to control the port IPsec capabilities.
When IPsec packet is disabled for a function of the port (default),
function cannot offload IPsec packet operations (encapsulation and XFRM
policy offload). When enabled, IPsec packet operations can be offloaded
by the function of the port, which includes crypto operation
(Encrypt/Decrypt), IPsec encapsulation and XFRM state and policy
offload.
Example of a PCI VF port which supports IPsec packet offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose port function commands to enable / disable IPsec crypto offloads,
this is used to control the port IPsec capabilities.
When IPsec crypto is disabled for a function of the port (default),
function cannot offload any IPsec crypto operations (Encrypt/Decrypt and
XFRM state offloading). When enabled, IPsec crypto operations can be
offloaded by the function of the port.
Example of a PCI VF port which supports IPsec crypto offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new check for the tx devlink health reporter is introduced for
determining when the PTP port timestamping SQ is considered unhealthy. If
there are enough CQEs considered never to be delivered, the space that can
be utilized on the SQ decreases significantly, impacting performance and
usability of the SQ. The health reporter is triggered when the number of
likely never delivered port timestamping CQEs that utilize the space of the
PTP SQ is greater than 93.75% of the total capacity of the SQ. A devlink
health reporter recover method is also provided for this specific TX error
context that restarts the PTP SQ.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead,
only use the generic devlink documentation directory to document mlx5
devlink parameters. Avoid providing general devlink tool usage information
in mlx5-specific documentation.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Commit e523af4ee5 ("net/ice: Add support for enable_iwarp and enable_roce
devlink param") added support for the enable_roce and enable_iwarp
parameters in the ice driver. It didn't document these parameters in the
ice devlink documentation file. Add this documentation, including a note
about the mutual exclusion between the two modes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We refer to a TC NIC rule that involves forwarding as "hairpin".
Hairpin queues are mlx5 hardware specific implementation for hardware
forwarding of such packets.
Per the discussion in [1], move the hairpin queues control (number and
size) from debugfs to devlink.
Expose two devlink params:
- hairpin_num_queues: control the number of hairpin queues
- hairpin_queue_size: control the size (in packets) of the hairpin queues
[1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add devlink info support for ef100. The information reported is obtained
through the MCDI interface with the specific meaning defined in new
documentation file.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
1) From Roi and Mark: MultiPort eswitch support
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
2.1) Cleanups related to mlx5's devlink port logic
2.2) Move devlink port registration to be done before netdev alloc
2.3) Create auxdev devlink instance in the same ns as parent devlink
2.4) Suspend auxiliary devices only in case of PCI device suspend
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmPsBlsACgkQSD+KveBX
+j6izAgAtvzimjzOqI8J0FKPW3piRH3VtNWUrlGAf4HHPI0lZMbEV5GIaSI15JeH
wrIpNXKzaA+6+NZ7TzTwqVO+zyKCQVpRw7xPANIJ2A5dId36jU2AgW06zgzFuYWa
mXKG8rAUls6E5a5DHTaY/SueWMO9KMOfLzHFXHNsLAKTAw+FoDdlGso5vgvsy44g
2/N/kDBdzC5n8og934sM7JymthnTVyuGe/Au2w1UUR1MMZ46OQgmhStDwqS5MrzI
pIi+tWFG9YFM5/J8d13y7X/xMCq26Aw6SZSUhsRfTk0goy0uKaU6yYm8vSbO0mci
+e0c8bpWL/MzAhMzWj8CwBPeO6knOw==
=tYc2
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-02-10
1) From Roi and Mark: MultiPort eswitch support
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
2.1) Cleanups related to mlx5's devlink port logic
2.2) Move devlink port registration to be done before netdev alloc
2.3) Create auxdev devlink instance in the same ns as parent devlink
2.4) Suspend auxiliary devices only in case of PCI device suspend
* tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Suspend auxiliary devices only in case of PCI device suspend
net/mlx5: Remove "recovery" arg from mlx5_load_one() function
net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink
net/mlx5e: Move devlink port registration to be done before netdev alloc
net/mlx5e: Move dl_port to struct mlx5e_dev
net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port
net/mlx5e: Pass mdev to mlx5e_devlink_port_register()
net/mlx5: Remove outdated comment
net/mlx5e: TC, Remove redundant parse_attr argument
net/mlx5e: Use a simpler comparison for uplink rep
net/mlx5: Lag, Add single RDMA device in multiport mode
net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode
net/mlx5: E-Switch, rename bond update function to be reused
net/mlx5e: TC, Add peer flow in mpesw mode
net/mlx5: Lag, Control MultiPort E-Switch single FDB mode
====================
Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update devlink-health.rst file:
- Add devlink formatted message (fmsg) API documentation.
- Add auto-dump as a condition to do dump once error reported.
- Expand OOB to clarify this acronym.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort E-Switch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
Example:
$ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \
cmode runtime
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Correct spelling problems for Documentation/networking/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20230129231053.20863-5-rdunlap@infradead.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
toc entry is missing for etas_es58x devlink doc and triggers this warning:
Documentation/networking/devlink/etas_es58x.rst: WARNING: document isn't included in any toctree
Add the missing toc entry.
Fixes: 9f63f96aac ("Documentation: devlink: add devlink documentation for the etas_es58x driver")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221213051136.721887-1-mailhol.vincent@wanadoo.fr
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
List all the version information reported by the etas_es58x driver
through devlink. Also, update MAINTAINERS with the newly created file.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221130174658.29282-8-mailhol.vincent@wanadoo.fr
[mkl: fixed version information table: "bl" -> "fw.bootloader"
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As discussed in [1], abbreviating the bootloader to "bl" might not be
well understood. Instead, a bootloader technically being a firmware,
name it "fw.bootloader".
Add a new macro to devlink.h to formalize this new info attribute name
and update the documentation.
[1] https://lore.kernel.org/netdev/20221128142723.2f826d20@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221130174658.29282-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Expose port function commands to enable / disable migratable
capability, this is used to set the port function as migratable.
Live migration is the process of transferring a live virtual machine
from one physical host to another without disrupting its normal
operation.
In order for a VM to be able to perform LM, all the VM components must
be able to perform migration. e.g.: to be migratable.
In order for VF to be migratable, VF must be bound to VFIO driver with
migration support.
When migratable capability is enabled for a function of the port, the
device is making the necessary preparations for the function to be
migratable, which might include disabling features which cannot be
migrated.
Example of LM with migratable function configuration:
Set migratable of the VF's port function.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 migratable disable
$ devlink port function set pci/0000:06:00.0/2 migratable enable
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 migratable enable
Bind VF to VFIO driver with migration support:
$ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/unbind
$ echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:08:00.0/driver_override
$ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/bind
Attach VF to the VM.
Start the VM.
Perform LM.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose port function commands to enable / disable RoCE, this is used to
control the port RoCE device capabilities.
When RoCE is disabled for a function of the port, function cannot create
any RoCE specific resources (e.g GID table).
It also saves system memory utilization. For example disabling RoCE enable a
VF/SF saves 1 Mbytes of system memory per function.
Example of a PCI VF port which supports function configuration:
Set RoCE of the VF's port function.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce enable
$ devlink port function set pci/0000:06:00.0/2 roce disable
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce disable
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink port function hw_addr attr documentation is in mlx5 specific
file while there is nothing mlx5 specific about it.
Move it to devlink-port.rst.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .read handler for the NVM and Shadow RAM regions. This
enables user space to read a small chunk of the flash without needing the
overhead of creating a full snapshot.
Update the documentation for ice to detail which regions have direct read
support.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
78ad87da99 ("ice: devlink: add shadow-ram region to snapshot Shadow RAM")
added support for the 'shadow-ram' devlink region, but did not document it
in the ice devlink documentation. Fix this.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To read from a region, user space must currently request a new snapshot of
the region and then read from that snapshot. This can sometimes be overkill
if user space only reads a tiny portion. They first create the snapshot,
then request a read, then destroy the snapshot.
For regions which have a single underlying "contents", it makes sense to
allow supporting direct reading of the region data.
Extend the DEVLINK_CMD_REGION_READ to allow direct reading from a region if
requested via the new DEVLINK_ATTR_REGION_DIRECT. If this attribute is set,
then perform a direct read instead of using a snapshot. Direct read is
mutually exclusive with DEVLINK_ATTR_REGION_SNAPSHOT_ID, and care is taken
to ensure that we reject commands which provide incorrect attributes.
Regions must enable support for direct read by implementing the .read()
callback function. If a region does not support such direct reads, a
suitable extended error message is reported.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel test robot reported indentation warnings:
Documentation/networking/devlink/devlink-port.rst:220: WARNING: Unexpected indentation.
Documentation/networking/devlink/devlink-port.rst:222: WARNING: Block quote ends without a blank line; unexpected unindent.
These warnings cause lists (arbitration flow for which the warnings blame to
and 3-step subfunction setup) to be rendered inline instead. Also, for the
former list, automatic list numbering is messed up.
Fix these warnings by adding missing blank line padding.
Link: https://lore.kernel.org/linux-doc/202211200926.kfOPiVti-lkp@intel.com/
Fixes: 242dd64375 ("Documentation: Add documentation for new devlink-rate attributes")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide documentation for newly introduced netlink attributes for
devlink-rate: tx_priority and tx_weight.
Mention the possibility to export tree from the driver.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation to a newly added devlink-rate feature. Provide some
examples on how to use the commands, which netlink attributes are
supported and descriptions of the attributes.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add packet traps for 802.1X operation. The "eapol" control trap is used
to trap EAPOL packets and is required for the correct operation of the
control plane. The "locked_port" drop trap can be enabled to gain
visibility into packets that were dropped by the device due to the
locked bridge port check.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change occurrences of "it's" that are possessive to "its"
so that they don't read as "it is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220829235414.17110-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-24 (ice)
This series contains updates to ice driver only.
Marcin adds support for TC parsing on TTL and ToS fields.
Anatolli adds support for devlink port split command to allow
configuration of various port configurations.
Jake allows for passing and writing an additional NVM write activate
field by expanding current cmd_flag.
Ani makes PHY debug output more readable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
