Commit Graph

349 Commits

Author SHA1 Message Date
Krzysztof Kozlowski
a28ab162bd Documentation: ARM: EXYNOS: Describe boot loaders interface
Various boot loaders for Exynos based boards use certain memory
addresses during booting for different purposes. Mostly this is one of
following :
1. as a CPU boot address,
2. for storing magic cookie related to low power mode (AFTR, sleep).

The document, based solely on kernel source code, tries to group the
information scattered over different files. This would help in the
future when adding support for new SoC or when extending features
related to low power modes.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-06-08 16:39:54 -06:00
Maxime Coquelin
9b799b7837 ARM: Add STM32 family machine
STMicrolectronics's STM32 series is a family of Cortex-M
microcontrollers. It is used in various applications, and
proposes a wide range of peripherals.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-15 21:43:23 +02:00
Pawel Moll
8f06c51fac bus: arm-ccn: Provide required event arguments
Since 688d4dfcdd "perf tools: Support
parsing parameterized events" the perf userspace tools understands
"argument=?" syntax in the events file, making sure that required
arguments are provided by the user and not defaulting to 0, causing
confusion.

This patch adds the required arguments lists for CCN events.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2015-05-01 17:51:03 +01:00
Pawel Moll
ffa415245b bus: arm-ccn: cpumask attribute
This patch adds a "cpumask" attribute to CCN's event_source class sysfs
directory. Perf user tool uses it to restrict events to the
processor(s) enumerated in this mask.

This patch provides a single CPU mask, making it possible to run "-a"
perf session (previously it would request the same CCN event, for
example cycle counter, on each available core and most likely fail).
Initially the mask is set to the CPU that happened to probe the driver,
but it will be changed when it is hot-un-plugged (active events are
migrated to another CPU then).

Example:

 Performance counter stats for 'system wide':

CPU0               2968148      cycles
CPU1               2236736      cycles
CPU2               1797968      cycles
CPU3               1831715      cycles
CPU1            1201850868      ccn/cycles/

       1.001241383 seconds time elapsed

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2015-05-01 17:51:01 +01:00
Linus Torvalds
e5ac320de1 ARM: SoC multiplatform code changes for v4.1
The changes here belong to two main platforms:
 
 - Atmel At91 is flipping the bit and going multiplatform. This includes some
   cleanups and removal of code, and the final flip of config dependencies
 
 - Shmobile has several platforms that are going multiplatform, but this
   branch also contains a bunch of cleanups that they weren't able to keep
   separate in a good way. THere's also a removal of one of their SoCs and the
   corresponding boards (sh7372 and mackerel).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzfJAAoJEIwa5zzehBx3iRcP/1v9Rw2yk4NpUDaz5EUwhwN6
 y5l29gW8jJmVuHWqLUqsgh61dsj5AEEAL7fEEbR8e8848s+RxsehjsGPIxFOkR74
 KaKSRlrUgxKcsFN97Jo/WqT3seC83hg6zWQapwNypX33gBtrRLPhM9FEb05asYA8
 6x7N29kFeH9M3A6lrabXGWz5tPRZSthwuBSmomHOfgqa5zbgkoaK59j867Yac0q+
 Pemh0eJZHC3Pyrmh7ZcVaCaSvr1QO6ructmLopmHAXfls2Fi21wq3IN3641aiitC
 G7hhb1/c961MpE3p+0dQyrXs645qIgYv/fDxp72T8YwA7FhjMmIscX/WiITXMlvC
 Mg/fDJXqgRkTPWjvVM6xF8TKCSdvqfmErWtHt2dtgvbFWL0ffSeoYF35AF5BODVG
 jp8RR6vQ/CHKFao5iJmTpm0ccjnzdS82FEb0PrhG0vY+u6uCsKMim5tn8wUBuBkM
 QU2FipNt6STC5ZcCSb+p7r5ihod9rG+BlNL/eXJ+pBHuVnjSgltEaZBP9qIiFjZl
 MLRjm7JaEY3LpAR/TVurtSrUnh0zC0RRSzptK4RekmFIwyL+mqq/I1yrksdnVjgf
 upj1dZwFRsVtD5PcaU3LyTYCOLSI8L9+b6vVvfFH0Sq4V7TkaBkI/kxnhI2WfkBc
 CJ+3vptpyphw6zHAngAN
 =Vq4N
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code changes from Olof Johansson:
 "The changes here belong to two main platforms:

   - Atmel At91 is flipping the bit and going multiplatform.  This
     includes some cleanups and removal of code, and the final flip of
     config dependencies

   - Shmobile has several platforms that are going multiplatform, but
     this branch also contains a bunch of cleanups that they weren't
     able to keep separate in a good way.  THere's also a removal of one
     of their SoCs and the corresponding boards (sh7372 and mackerel)"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  ARM: at91/pm: move AT91_MEMCTRL_* to pm.h
  ARM: at91/pm: move the standby functions to pm.c
  ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected
  ARM: at91: add a Kconfig dependency on multi-platform
  ARM: at91: drop AT91_TIMER_HZ
  ARM: at91: remove hardware.h
  ARM: at91: remove SoC headers
  ARM: at91: remove useless mach/cpu.h
  ARM: at91: remove unused headers
  ARM: at91: switch at91_dt_defconfig to multiplatform
  ARM: at91: switch to multiplatform
  ARM: shmobile: r8a7778: enable multiplatform target
  ARM: shmobile: bockw: add sound to DT
  ARM: shmobile: r8a7778: add sound to DT
  ARM: shmobile: bockw: add devices hooked up to i2c0 to DT
  DT: i2c: add trivial binding for OKI ML86V7667 video decoder
  ARM: shmobile: r8a7778: common clock framework CPG driver
  ARM: shmobile: bockw dts: set extal clock frequency
  ARM: shmobile: bockw dts: Move Ethernet node to BSC
  ARM: shmobile: r8a73a4: Remove legacy code
  ...
2015-04-22 09:20:15 -07:00
Linus Torvalds
e6c81cce56 ARM: SoC platform updates for v4.1
Our SoC branch usually contains expanded support for new SoCs and other core
 platform code. In this case, that includes:
 
 - Support for the new Annapurna Labs "Alpine" platform
 - A rework greatly simplifying adding new platform support to the MCPM
   subsystem (Multi-cluster power management)
 - Cpuidle and PM improvements for Exynos3250
 - Misc updates for Renesas, OMAP, Meson, i.MX. Some of these could have
   gone in other branches but ended up here for various reasons.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzfWAAoJEIwa5zzehBx3idcP/Rt042tqb0bian/4M1Ud1aQ7
 AMRd4oU5MfWAlzaGPeMBS+b1eo/eENj6wyWsvBQIByZN76ImlUXtxsx0U0frLrVg
 mWVo9zOLRuoE6yyq329zZgg1IM1RtRIruS6zucKsHgKtq0DcjhYGGUH0ZVZk/rKI
 RLtRK8U6Jr0lnpu1TDE5mii7GCCZlEl5dG+J3w5ewC9y7RLRlM09xjK/Zsj0QOqY
 JvMOIaHuHMT6l7BQ6QajtVxTeGECOJ3YDqC6mDHCVD7f3v88+7H5C20xNGPK921w
 tLfB5qOojnj+kKZRPhi8EGnRzKwrBq6/mE5CvvigTCGlAEUOzy7PFSY9oNE80QeL
 6mUdPTuZuqz7ZEIF0kj8I0AkB6k8B+aYfqA9mqM5yGpa11HvZZGfP7CwI4izoe6+
 sT++0OeDPwbsMyRxZjqNQLs4QYaKGYMP4NCgA17zz5ToRCQZy7e5hd2GYzaRouyi
 kTpR9FbxwDcBIwTcA3F7oJ90BEMJ0tvGz/Al11UQpzPePhTwQt2yB5bRZyK/RYIU
 x8k8RHArG3fmS89D4aOViL3sy/zoUBedx4UfAo6jVbrvoZGALQL23KHdqBqDiPmP
 sMRj/sSr+0h9nJCVNM6I/OUD4/IrpFGaeX9V7rpEsHVe7j83eV7Q2wNRPyVTgxdn
 jS8TS0FNAXIv8FO9EoNH
 =tcGs
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Our SoC branch usually contains expanded support for new SoCs and
  other core platform code.  In this case, that includes:

   - support for the new Annapurna Labs "Alpine" platform

   - a rework greatly simplifying adding new platform support to the
     MCPM subsystem (Multi-cluster power management)

   - cpuidle and PM improvements for Exynos3250

   - misc updates for Renesas, OMAP, Meson, i.MX.  Some of these could
     have gone in other branches but ended up here for various reasons"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  ARM: alpine: add support for generic pci
  ARM: Exynos: migrate DCSCB to the new MCPM backend abstraction
  ARM: vexpress: migrate DCSCB to the new MCPM backend abstraction
  ARM: vexpress: DCSCB: tighten CPU validity assertion
  ARM: vexpress: migrate TC2 to the new MCPM backend abstraction
  ARM: MCPM: move the algorithmic complexity to the core code
  ARM: EXYNOS: allow cpuidle driver usage on Exynos3250 SoC
  ARM: EXYNOS: add AFTR mode support for Exynos3250
  ARM: EXYNOS: add code for setting/clearing boot flag
  ARM: EXYNOS: fix CPU1 hotplug on Exynos3250
  ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
  ARM: cygnus: fix const declaration bcm_cygnus_dt_compat
  ARM: DRA7: hwmod: Fix the hwmod class for GPTimer4
  ARM: DRA7: hwmod: Add data for GPTimers 13 through 16
  ARM: EXYNOS: Remove left over 'extra_save'
  ARM: EXYNOS: Constify exynos_pm_data array
  ARM: EXYNOS: use static in suspend.c
  ARM: EXYNOS: Use platform device name as power domain name
  ARM: EXYNOS: add support for async-bridge clocks for pm_domains
  ARM: omap-device: add missed callback for suspend-to-disk
  ...
2015-04-22 09:08:39 -07:00
Linus Torvalds
d0440c59f5 ARM: SoC cleanups for v4.1
We've got a fairly large cleanup branch this time. The bulk of this is removal
 of non-DT platforms of several flavors:
 
 - Atmel at91 platforms go full-DT, with removal of remaining board-file based
   support
 - OMAP removes legacy board files for three more platforms
 - Removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom
 - Freescale i.MX25 also removes non-DT platform support
 
 Most of the rest of the changes here are fallout from the above, i.e. for
 example removal of drivers that now lack platforms, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzI3AAoJEIwa5zzehBx3ePwQAJKb4Mf72/4iiKb4dbVcooQN
 EiZ84fwWiWD6Mww/3A76xVnz/b7JWmB3vwW0b4fcbvzubmOjnROBmZgCWeNy4ZTv
 dOZc3/9jK7OrlwvpFBeZykQwHcbz+550+m3WxmLft1oqH/7BA1k5aunwYtFB96ii
 5Owi4Cy9OmxEyALQAvzktFaJdI7J66LNb+i30r5zIZHlkVooeF3UyadndiswUP2o
 EBzCE8UPqRi5kV6FuwVyf4MZaV28FWoglTqdx9OxogcTnKNFT6RlHQ39q/iPu348
 Wkh4kOryVy7Rlab1K4wQRpBoOwkonKDV73u2H2ifRFj7V9ZAdjibK8pgKn3kjkba
 bJkwHIqlqtqqqjj2Hh93wl+8hKSypoLXO9tagPWYBiLtFXCH/+EVsihWYpAc/A5E
 pUS6hJrJyXKJouwwsXu6459zP0ieqhvpbQG72xs9PRimAfAdSTulSTzdI/dMh42Q
 pwYkmvh+ReY3Ll4MeCzu7+eCIY0qAKsor48W1ImuziwQhg2lZj16qWtA4YdPk3+O
 N8ckyaaFg663PAfsZgBx1qTgxw5v0ec2k68/iEVGS5mUJCgcWxFvR95chTDIxQXq
 ZmJ+SuMFyLB/2zVSiGU96L1PQTcUkxJJ8LVB3qNp6KlYT7qUSsgAU+qYveFlUh+p
 X8MVsSVh8n1MTNepsLij
 =BV8A
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "We've got a fairly large cleanup branch this time.  The bulk of this
  is removal of non-DT platforms of several flavors:

   - Atmel at91 platforms go full-DT, with removal of remaining
     board-file based support

   - OMAP removes legacy board files for three more platforms

   - removal of non-DT mach-msm, newer Qualcomm platforms now live in
     mach-qcom

   - Freescale i.MX25 also removes non-DT platform support"

Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  ARM: shmobile: cpuidle: Remove the pointless default driver
  ARM: davinci: dm646x: Add interrupt resource for McASPs
  ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
  ARM: davinci: dm646x: Clean up the McASP DMA resources
  ARM: davinci: devices-da8xx: Add support for McASP2 on da830
  ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
  ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
  ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
  ARM: OMAP2+: Remove legacy support for omap3 TouchBook
  ARM: OMAP3: Remove legacy support for devkit8000
  ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
  ARM: shmobile: Consolidate the pm code for R-Car Gen2
  ARM: shmobile: r8a7791: Correct SYSCIER value
  ARM: shmobile: r8a7790: Correct SYSCIER value
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...
2015-04-22 09:04:39 -07:00
Stephen Boyd
c0c89fafa2 ARM: Remove mach-msm and associated ARM architecture code
The maintainers for mach-msm no longer have any plans to support
or test the platforms supported by this architecture[1]. Most likely
there aren't any active users of this code anyway, so let's
delete it.

[1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-27 11:31:02 -05:00
Thomas Petazzoni
0d9ab18e33 Documentation: arm: update supported Marvell EBU processors
Now that we support Armada 39x, let's add this family of SoC to the
Marvell documentation, and a reference to a link with more details
about those processors. Unfortunately, no datasheet is publicly
available at this time.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:35:43 +01:00
Gregory Fong
dce12391d7 Documentation: arm: Update for DT-only platforms
The documentation specified that a machine type is mandatory and made
that assumption in a few places.  However, for DT-only platforms, the
current advice is that no machine type should be registered, so update
accordingly.

Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-02-27 14:54:55 -07:00
Magnus Damm
c6535e1e03 Documentation: Remove ZBOOT MMC/SDHI utility and docs
Remove ZBOOT MMC/SDHI Documentation for sh7372 together
wit the vrl4 utility. Without sh7372 and Mackerel support
these files are no longer useful.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:25 +09:00
Linus Torvalds
878ba61aa9 ARM: SoC platform changes
New and updated SoC support. Also included are some cleanups where the
 platform maintainers hadn't separated cleanups from new developent in
 separate branches.
 
 Some of the larger things worth pointing out:
 
 - A large set of changes from Alexandre Belloni and Nicolas Ferre
   preparing at91 platforms for multiplatform and cleaning up quite a
   bit in the process.
 - Removal of CSR's "Marco" SoC platform that never made it out to the
   market. We love seeing these since it means the vendor published
   support before product was out, which is exactly what we want!
 
 New platforms this release are:
 
 - Conexant Digicolor (CX92755 SoC)
 - Hisilicon HiP01 SoC
 - CSR/sirf Atlas7 SoC
 - ST STiH418 SoC
 - Common code changes for Nvidia Tegra132 (64-bit SoC)
 
 We're seeing more and more platforms having a harder time labelling
 changes as cleanups vs new development -- which is a good sign that
 we've come quite far on the cleanup effort. So over time we might start
 combining the cleanup and new-development branches more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4uiiAAoJEIwa5zzehBx3LtoQAIP4eInJAumhB67MexzWGIBx
 eOsloBRMEBrjBQdSYsdsypN6T61WjDu1aieCxEGzIqitcMa59AIyyzglmlXy3UmV
 XQuSnIBag2fsOqrvqd+c6ewzAMxm2/Nbi3+zjzApkf27NDlBLhEjxuK6pAAf4Yw9
 gyWqB9g0d4V06XdqRInRvyyVfMu6fdApHLnadtjcMdiorQGd1bcOE1sQYygy6N6e
 d6vGvyKSv4ygyDG9//njzm6C5OnmHliimMToeuDC2Scel69RM97EnMXys988CqUH
 0Ru7XANEujtHXSOBYOyCv1kk4V5NguGzlfepe23oidOew8MjUdyRvKrwUiMt3AnT
 SVqcZ9UU5wjJC6j+iADh+E7zww2H0rA6vFRzXy297dDuLg2C2ONFljBj/tIKGc71
 ++gLc6LRn7UmSyK98JMzkxDhmnnPn8w2O0M5GdabAqzZSfHlL1juW9ljp9Al5P6y
 apLRzqMGjEoyC4huXvB3XVfrxGfepe5pco6wVlwmF3ilwf7iHnfuHONC1aw2mPRO
 aOKiS+0gHWL3rNZtZQtyW7Ws0I2HJFip2CWIloBK1/2ntEoh51PH7jGw8iu/6jTk
 //DCXqPBNXcLqonB9CHJZ/EWt0wup0BcHyLjlWX7iEjsdP/QJXrDgnrV3qdHibbh
 AJASjs0YVDcdvRsRStlg
 =szd9
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Also included are some cleanups where
  the platform maintainers hadn't separated cleanups from new developent
  in separate branches.

  Some of the larger things worth pointing out:

   - A large set of changes from Alexandre Belloni and Nicolas Ferre
     preparing at91 platforms for multiplatform and cleaning up quite a
     bit in the process.

   - Removal of CSR's "Marco" SoC platform that never made it out to the
     market.  We love seeing these since it means the vendor published
     support before product was out, which is exactly what we want!

  New platforms this release are:

   - Conexant Digicolor (CX92755 SoC)
   - Hisilicon HiP01 SoC
   - CSR/sirf Atlas7 SoC
   - ST STiH418 SoC
   - Common code changes for Nvidia Tegra132 (64-bit SoC)

  We're seeing more and more platforms having a harder time labelling
  changes as cleanups vs new development -- which is a good sign that
  we've come quite far on the cleanup effort.  So over time we might
  start combining the cleanup and new-development branches more"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
  ARM: at91/trivial: unify functions and machine names
  ARM: at91: remove at91_dt_initialize and machine init_early()
  ARM: at91: change board files into SoC files
  ARM: at91: remove at91_boot_soc
  ARM: at91: move alternative initial mapping to board-dt-sama5.c
  ARM: at91: merge all SOC_AT91SAM9xxx
  ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
  ARM: digicolor: select syscon and timer
  ARM: zynq: Simplify SLCR initialization
  ARM: zynq: PM: Fixed simple typo.
  ARM: zynq: Setup default gpio number for Xilinx Zynq
  ARM: digicolor: add low level debug support
  ARM: initial support for Conexant Digicolor CX92755 SoC
  ARM: OMAP2+: Add dm816x hwmod support
  ARM: OMAP2+: Add clock domain support for dm816x
  ARM: OMAP2+: Add board-generic.c entry for ti81xx
  ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
  ARM: at91: remove unused mach/system_rev.h
  ARM: at91: stop using HAVE_AT91_DBGUx
  ARM: at91: fix ordering of SRAM and PM initialization
  ...
2015-02-17 09:27:54 -08:00
Linus Torvalds
ea7531ac4a ARM: SoC cleanups
This is a good healthy set of various code removals. Total net delta is 8100
 lines removed.
 
 Among the larger cleanups are:
 
 - Removal of old Samsung S3C DMA infrastructure by Arnd
 - Removal of the non-DT version of the 'lager' board by Magnus Damm
 - General stale code removal on OMAP and Davinci by Rickard Strandqvist
 - Removal of non-DT support on am3517 platforms by Tony Lindgren
 
 ... plus several other cleanups of various platforms across the board.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4uYeAAoJEIwa5zzehBx3v58P/RGKt5e4CgCdHKjVhbPmADSE
 FVECT4qrIkf4dFgU5qPCBDCtQn/B3ljxZnq6Hqi8VxYD+pRcXt94R50ZyhGUZ6QF
 GLXU8jDSlY906uJwW+CHZFVLmDjTM4ONLn1ZMRtcdOrU3yGC5rZq9+Kla6ZIE6jb
 mUAFMj6e+NBPYDonq93G7968EdyLJOtK4B2ylPW0+wgSRGIEPibCiNi9yyN4hBFr
 LiaOyY/execKUo2K2BFWkfAZWt7GrwBu/qAkz/9YDRDiikLwFG2UBWbaik5Fj8tf
 v8wvpL6Af6iLpRx1wI/HoCgjFS/g/n4O3svMe7aHGyfrkEAxNtoCKlFscO8w/aLc
 eABNAb5j65it8IHvQMR5RhgqWoQe4XMlDcwsxotTe64GfxpTahdhDmhk7RKAY9Xq
 MyITvtZPTPHTSZHNEDE3HtgHn62ndSinYFhdTaBi2FQxLNCUFl2TKZxpb0r65JI/
 2yOf6hcgWGTgV1VOruAc5SHcSkQOY3SptM4n4F1B0VcDrCphBDYhRTdokELFJIIq
 I47Week8o0f+a4ot/sf0QhU68wVZENgUJO3/Q5Buta+UGSZa4NYH7Ymc159e7hGS
 k+7mCeTJC85F0H/EBWvCcZzbpwiq7jBRAY2PhqYF1EQkefdR/+28o1sX090fVaXD
 n0gXv3/ZDvJB2ryv8lR/
 =tsjK
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is a good healthy set of various code removals.  Total net delta
  is 8100 lines removed.

  Among the larger cleanups are:

   - Removal of old Samsung S3C DMA infrastructure by Arnd
   - Removal of the non-DT version of the 'lager' board by Magnus Damm
   - General stale code removal on OMAP and Davinci by Rickard Strandqvist
   - Removal of non-DT support on am3517 platforms by Tony Lindgren

  ... plus several other cleanups of various platforms across the board"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
  ARM: sirf: drop redundant function and marco declaration
  arm: omap: specify PMUs are for ARMv7 CPUs
  arm: shmobile: specify PMUs are for ARMv7 CPUs
  arm: iop: specify PMUs are for XScale CPUs
  arm: pxa: specify PMUs are for XScale CPUs
  arm: realview: specify PMU types
  ARM: SAMSUNG: remove unused DMA infrastructure
  ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
  ARM: davinci: Remove CDCE949 driver
  ARM: at91: remove useless at91rm9200_set_type()
  ARM: at91: remove useless at91rm9200_dt_initialize()
  ARM: at91: move debug-macro.S into the common space
  ARM: at91: remove useless at91_sysirq_mask_rtx
  ARM: at91: remove useless config MACH_AT91SAM9_DT
  ARM: at91: remove useless config MACH_AT91RM9200_DT
  ARM: at91: remove unused mach/memory.h
  ARM: at91: remove useless header file includes
  ARM: at91: remove unneeded header file
  rtc: at91/Kconfig: remove useless options
  ARM: at91/Documentation: add a README for Atmel SoCs
  ...
2015-02-17 09:17:33 -08:00
Olof Johansson
d073d7a146 Samsung cleanup for v3.20
- remove i2c sys configuration from mach-exynos/
   : all related codes moved into i2c driver
 - remove Samsung specific DMA
   : every Samsung stuff uses dmaengine APIs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJUyXM3AAoJEA0Cl+kVi2xqn8MP/jDl9Jgx94dvLoj+jZxrN/QL
 qm4ZbhWnQ+DCv6B8GSgkwljWTpQazqUztft1FXpjKUW3p2VoQHugb0a62jySx6vG
 VKCxLsZh95Zj7ZL1q18v1HO7zrAm/TdWl7H+j55jATfQVQGmHeiFTkyHBYVmicHU
 /HMwT3C42oJEiz58BPs0uoM5Pfm+2cV8J4yj2VMIQXLx5y52+Ic0s228yJxqWYuO
 Nm7RGMW5oJwkgAli2ug0VqMUYGVg4otiNqoXIl9DP1B+yhdvEsXrkPcDNvTqgJBU
 nq+ho3X2qFM+ETMi80QA4YNq/MM5Ns3cqwMprVTeAvMe8xJqjL3FpSc3eDQRRhHq
 LHn0eUhwOj4xWa5d/dku6Onp1UOBSqvuURj30Vg2OXMwwBa/DD5g3sihmvBXUdVa
 Bd8QEWl9gcVTXqjRb3V2X9UdID3EZMongAohzAqi/ailb8kFmdGPOt7EZsPGa4ZA
 YkxR/KvcLMEjClwGVDH9x7vJq8rONSi+zWhE3MbBMjyj4quUv4tzMUb2Bl2dkrma
 lrpberjceQ2gLIRFC8fy5JoL4sNfIT3JcCpLCRMZXK9SbWx7UjdV3Ni8m04ldwJt
 +Jjoh2qiZ/wsFH++RyJ2K3yrntcGhzqe/wfm1ZB6dGe0W/XRIOb/dq9vBODbX/9W
 yl99BuYWxUZw9aHPfRp2
 =2/ZU
 -----END PGP SIGNATURE-----

Merge tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

Merge "Samsung cleanup for v3.20" from Kukjin Kim:

- remove i2c sys configuration from mach-exynos/
  : all related codes moved into i2c driver
- remove Samsung specific DMA
  : every Samsung stuff uses dmaengine APIs

* tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: remove unused DMA infrastructure
  ARM: EXYNOS: Remove i2c sys configuration related code

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29 13:52:52 -08:00
Olof Johansson
688a4994cc Allwinner core changes for 3.20
- Support for the A31s
   - Adding support for cpufreq using cpufreq-dt
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUxSahAAoJEBx+YmzsjxAgw7cP/iukSTTuTxagl9HLmet3pSY/
 v4WunNKUm/cTWQkcK9xEOy2TV2nFQ00mdji1Jf1EI/cacBKvByTsmPlEOkfj0dnG
 mfxkWiF3bwcpG1L0ABIFnU1A1/PjDGTl0jMp2q7S8BE09jJfb8TcY3wwfoWRwAeD
 LFPICHbsGRIb5WU/3pq14/GaYYSTt/BRe6+wCuB/zoU4b8HaGzw6ztZ2Gz2ztUtw
 m2xYcWUEj0kmeX/wg52eRxJrjcznwDoabxxPM+q7ttL3J3NG/A81Uf0lkLlwl2fD
 QSueSzsE68RsG0q/SkvQ5jkVDyOX/4o6bSdy6O8pS/qW1rwgqVDnPzrYXuj8duU4
 /Y+B6lAXdGierXSWhmuGBSPBNO/zblPNrJbJRqNlGscU1qfaWzZXSW8hRFlyMx4P
 17TARZLmZtruGsLWSwMpsjXFtJOnF7kdwdKqx2aoV1ZmTmNVhOKopUohNRFKSU+F
 e9a/U+yN5LggQG34s+YoPggwUg3qjBengA6yO8t5aOz9upjhEzqML1uulYrvPrRS
 8qsjkbgSdXZruG26l4pJYUIZ6QMgma3shxDGXvvenAI45pRniG1YfKPlh9Z0c3Dh
 VZRvR+mM6v82z3+mtOf9VSrJkUnOUTONRA3Qt2dSFU4LZaPlDtG0dxbxEA0E+KgQ
 0XRz7Bu0LRVkzn6un+4d
 =JU1v
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-core-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc

Merge "Allwinner core changes for 3.20" from Maxime Ripard:

  - Support for the A31s
  - Adding support for cpufreq using cpufreq-dt

* tag 'sunxi-core-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: Register cpufreq-dt for sun[45678]i
  ARM: sunxi: Add "allwinner,sun6i-a31s" to mach-sunxi

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-26 20:23:45 -08:00
Arnd Bergmann
d50b9e2e78 ARM: SAMSUNG: remove unused DMA infrastructure
Everything uses dmaengine now, so there is no reason to
keep this around any longer. Thanks to everyone who was involved
in moving the users over to use the dmaengine APIs.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:09:54 +09:00
Olof Johansson
a62d351dc5 STi SoC updates for v3.20, round 1.
Highlights:
 -----------
  - Add support for STiH418 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUuTISAAoJEMo4jShGhw+JcFYP/3bP7070L3tKnMekdYUQVCNW
 8TVCjUvD6RsZDWDpdadSUpVQvVxyIzTpfA1J/+/TEFUwagefRTnLAh5w86jYd4dv
 OIUbbPU6n6OWSJpetsLht1rTuraU4geSOMoip5NmjX2kabq/dBFfep/+IwGOGAJy
 58ojf20hOMGX+WVKkwko021zgbfGbrZUkz0WdA6RD3yVPItx9Nv6uAUe+mcqg7o7
 ITnu+I8iv7UooGoOLXiYRDLu6AbBdiLjBMJGax5LHWX4A1SP5V3uTLakmThz2jfr
 h9mlhJIvuq7S2tBIPjV9borkgLvxdtmCY6N3ufjyiis0BNb3HaiNaYjUsZ5b6h9s
 8MPLJHeb/yD6zwvXtyD1tSPshptgXcFbVSufCPW0ZE7QB1t7LKntgH/qMMLW3V31
 BMZDjUXGuxRO3UdYB2hMP0DX/Q9otHRiparMN0ur8kOIAgUL7O3YarHdQDWzBTok
 6qKISAL/aP6koqjGReDvwdRYsDS5AZFK7i/ufNnoCms5QYJJwZ8KwS9oJZ/+eOks
 LgwPzwjkxHS8J/LDt0kzIa5A3ljByQuCWy6uDJjyJJTBiFHq79p7fPkFa0hpteCk
 IEvCJcLqY9aTcH/P06RmdLKI+FU7B39fUg2DY9/Lj7MG+/nbJ7CAoCXofA/g7N1/
 6u9i5g80vShUGh9pzvhV
 =3CrD
 -----END PGP SIGNATURE-----

Merge tag 'sti-soc-for-v3.20-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/soc

Merge "ARM: STi: SoC changes for v3.20, round 1" from Maxime Coquelin:

Highlights:
-----------
 - Add support for STiH418 SoC

* tag 'sti-soc-for-v3.20-1' of git://git.stlinux.com/devel/kernel/linux-sti:
  ARM: STi: Add STiH418 SoC support

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21 15:23:24 -08:00
Maxime COQUELIN
dd548cf910 ARM: STi: Add STiH418 SoC support
This patch adds support to STiH418 SoC.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-16 13:10:21 +01:00
Nicolas Ferre
a4d1ca3425 ARM: at91/Documentation: add a README for Atmel SoCs
Add a README file to describe Atmel SoCs (aka AT91) support in Mainline Linux:
- SoC list + datasheet web links
- Basic but useful information
- Device Tree conventions and Work In Progress statement.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Olof Johansson <olof@lixom.net>
2015-01-15 15:24:02 +01:00
Hans de Goede
b0f2faa5ca ARM: sunxi: Add "allwinner,sun6i-a31s" to mach-sunxi
So far the A31s is 100% compatible with the A31, still lets do the same
as what we've done for the A13 / A10s and give it its own compatible string,
in case we need to differentiate later.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[Maxime: Removed unusude CPU_OF_DECLARE_METHOD]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-05 09:50:39 +01:00
Henrik Austad
5f6c3ac51d Update of Documentation/arm/00-INDEX
Added:
- arm/Makefile was added by adb19fb6 (add makefiles for more targets)
- arm/CCN.txt was added by a33b0daa (ARM CCN PMU driver)

Removed:
- arm/Sharp-LH was removed by 82e6923e (ARM: lh7a40x: remove
  unmaintained platform support)

Not updated:
Documentation/arm/msm/ is missing 00-INDEX (1 files)
Documentation/arm/Samsung-S3C24XX/ is missing 00-INDEX (12 files)
Documentation/arm/nwfpe/ is missing 00-INDEX (4 files)
Documentation/arm/OMAP/ is missing 00-INDEX (2 files)
Documentation/arm/sunxi/ is missing 00-INDEX (2 files)
Documentation/arm/SPEAr/ is missing 00-INDEX (1 files)
Documentation/arm/Marvell/ is missing 00-INDEX (1 files)
Documentation/arm/SA1100/ is missing 00-INDEX (18 files)
Documentation/arm/pxa/ is missing 00-INDEX (1 files)
Documentation/arm/sti/ is missing 00-INDEX (4 files)
Documentation/arm/SH-Mobile/ is missing 00-INDEX (4 files)
Documentation/arm/VFP/ is missing 00-INDEX (1 files)
Documentation/arm/Samsung/ is missing 00-INDEX (3 files)

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-doc@vger.kernel.org (open list:DOCUMENTATION)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-12-29 15:28:16 -07:00
Linus Torvalds
26ceb127f7 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "The major updates included in this update are:

   - Clang compatible stack pointer accesses by Behan Webster.
   - SA11x0 updates from Dmitry Eremin-Solenikov.
   - kgdb handling of breakpoints with read-only text/modules
   - Support for Privileged-no-execute feature on ARMv7 to prevent
     userspace code execution by the kernel.
   - AMBA primecell bus handling of irq-safe runtime PM
   - Unwinding support for memset/memzero/memmove/memcpy functions
   - VFP fixes for Krait CPUs and improvements in detecting the VFP
     architecture
   - A number of code cleanups (using pr_*, removing or reducing the
     severity of a couple of kernel messages, splitting ftrace asm code
     out to a separate file, etc.)
   - Add machine name to stack dump output"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (62 commits)
  ARM: 8247/2: pcmcia: sa1100: make use of device clock
  ARM: 8246/2: pcmcia: sa1111: provide device clock
  ARM: 8245/1: pcmcia: soc-common: enable/disable socket clocks
  ARM: 8244/1: fbdev: sa1100fb: make use of device clock
  ARM: 8243/1: sa1100: add a clock alias for sa1111 pcmcia device
  ARM: 8242/1: sa1100: add cpu clock
  ARM: 8221/1: PJ4: allow building in Thumb-2 mode
  ARM: 8234/1: sa1100: reorder IRQ handling code
  ARM: 8233/1: sa1100: switch to hwirq usage
  ARM: 8232/1: sa1100: merge GPIO multiplexer IRQ to "normal" irq domain
  ARM: 8231/1: sa1100: introduce irqdomains support
  ARM: 8230/1: sa1100: shift IRQs by one
  ARM: 8229/1: sa1100: replace irq numbers with names in irq driver
  ARM: 8228/1: sa1100: drop entry-macro.S
  ARM: 8227/1: sa1100: switch to MULTI_IRQ_HANDLER
  ARM: 8241/1: Update processor_modes for hyp and monitor mode
  ARM: 8240/1: MCPM: document mcpm_sync_init()
  ARM: 8239/1: Introduce {set,clear}_pte_bit
  ARM: 8238/1: mm: Refine set_memory_* functions
  ARM: 8237/1: fix flush_pfn_alias
  ...
2014-12-12 15:26:48 -08:00
Arnd Bergmann
8d6d5e128f Allwinner Core Additions for 3.19
This has mostly been about introducing A80 support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUa8NAAAoJEBx+YmzsjxAgNZ0P/22p1VKumZyoNRKF3vHn+iNV
 MBDa7UgVWXXQvBuysPs4n0MmG4sF/jKuD9IzVp6AI6U0M4HFqYwNJJl5ScT0+9ho
 jXgdZ/CfDGmbkQGHLYeDbj+ShuZFtpkcpf0373qh3EaJyoJaOTaYRlbkpVp/GSfb
 M97Q/cqYw+rOqs/YrSJOQgKAAePl6Avi6hOVJ/cRATBvsdm80fcQ0SbuhTVWlH9j
 5UXtLMDDbsCHnXCV05OkzkgQyJhNIhWuK8rURMTFG1HY5kkMQKSg1V8HSdjMoQp4
 dx+HP8J5j3deshCOcRGxO4aCo3CPp8GYR2c5jPXYCTTnjrhCOiHI25GAcmOhuXXI
 Tpixwo08pqTzTrevI8q6heAwBk2c3JA5INKswHOuRd988oD7vSfJpEYmyN+H6v1S
 wjzNDdsPecH+1hVZhp5iQ0NzDX7K/9N8gt24A/shin2cnCHgkVoU1/MFq/S3ZLQk
 qtibbcvdgBXAiX5BWlqPi2pWUdQ6LWXh3+UvLu6uEIvg5lrhoPsOilbuUbgQ7fdR
 B6OOwWur9MoV/Y/C8aquubU9Dwj8nrmYJ5lzNvkffD6zFAx7Pg803WewaNowAoGG
 e9MU6gAAn4/Km8Oig+dIkptnYHW+nPoodPNyoAMaJ9Ce+3YzpxclPVjEAzyzkZFh
 +1geJcIUj9hYSJeKT0gu
 =cJ5x
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-core-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc

Pull "Allwinner Core Additions for 3.19" from Maxime Ripard:

This has mostly been about introducing A80 support

* tag 'sunxi-core-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: make sun6i SMP ops static
  ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9i
  Documentation: sunxi: Add A80 datasheet link
  devicetree: bindings: Document supported Allwinner sunxi SoCs
  ARM: sunxi: Introduce Allwinner A80 support
  devicetree: bindings: Add vendor prefix for Merrii Technology Co., Ltd.
  ARM: sunxi: Add debug uart used by sun9i (Allwinner A80)
  Documentation: sunxi: Update Allwinner SoC documentation (A31/A31s/A23)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-20 17:23:57 +01:00
Russell King
06e944b8e5 generic fixmaps
ARM support for CONFIG_DEBUG_RODATA
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJUQDtHAAoJEIly9N/cbcAmS/gQAJnkmOBN5WLymkYE02QMcRZM
 l70c131QOGimFWUZpPxsyHdUFwASogxGet6LsGcbB40ayCrQw4tzXBlcFOvbY/dM
 HC+1I3CqRDphU/q2Mm/2bpg2F+VPbwIyxACPtsqW824muTHK47qDs3R9vVYDtfPV
 xupOpqz6qNFxgE5/TpDjsjVeJol/i+ygEQzIxo70m0FnLVv5t/deGjDM6bvfqwdm
 po/+hUlkW8lpyQspuucBCxfGagaCSkd67hyHMvq5zDjz1+6T1XljdA7jc7rSa9bI
 eCWuJgmM51AaA1lr+Eu1raSOduk0x1GU33wf1Y0z+qZ0A6ELTDmiY/SLMK6o8n6T
 4kPmzigRRT9a4B9kTR/mj9IyG+LAKu8Bvppl5CedNp2xEtIEGppnHU3d7bFZIVq3
 gCIL0ZG26D467hgUEgJwdJwnIU2GqirR4XyD3Ml+hjGCq6L5QzZpUWiskgh+EoHw
 dIhbJnGBxB2MkVJW0zE+ajVdiFAeU7P3voR74B73kwC9H+S6Fo10pff9LZbs8BKd
 R5RH5xCPDXgjnkjDbXW8e9Zkr58IrT0ffFcwE1IuDQpTMKKQPIlH5DUlRLQSHau9
 abDZuCZpvAPvGO4korTsu0dAXYJHlilG5Ftd856Hmrs+32eMDX2DV+RT4m7YX2Dt
 7tLXNu6P1yRFnjFdGxtR
 =u3lA
 -----END PGP SIGNATURE-----

Merge tag 'ronx-next' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into devel-stable

generic fixmaps
ARM support for CONFIG_DEBUG_RODATA
2014-11-03 10:12:13 +00:00
Tomasz Figa
9c261f89a3 ARM: firmware: Introduce suspend and resume operations
This patch extends the firmware_ops structure with two new callbacks:
.suspend() and .resume(). The former is intended to ask the firmware to
save all its volatile state and suspend the system, without returning
back to the kernel in between. The latter is to be called early by
very low level platform suspend code after waking up to restore low
level hardware state, which can't be restored in non-secure mode.

While at it, outdated version of the structure is removed from the
documentation and replaced with a reference to the header file.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-10-21 00:06:35 +09:00
Chen-Yu Tsai
19e704e35e Documentation: sunxi: Add A80 datasheet link
We now have initial support for the A80, as well a the datasheet.
Update the documents to reflect this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-20 14:51:30 +02:00
Chen-Yu Tsai
0da6e72504 Documentation: sunxi: Update Allwinner SoC documentation (A31/A31s/A23)
Lately we have received documentation for A31 and A31s, in addition to
A23 documentation which was received earlier but not added.

Add these to the README, and update to reflect that A31 and A23 are
supported.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-20 14:45:53 +02:00
Rob Herring
836a241832 ARM: expand fixmap region to 3MB
With commit a05e54c103 ("ARM: 8031/2: change fixmap mapping region to
support 32 CPUs"), the fixmap region was expanded to 2MB, but it
precluded any other uses of the fixmap region. In order to support other
uses the fixmap region needs to be expanded beyond 2MB. Fortunately, the
adjacent 1MB range 0xffe00000-0xfff00000 is availabe.

Remove fixmap_page_table ptr and lookup the page table via the virtual
address so that the fixmap region can span more that one pmd. The 2nd
pmd is already created since it is shared with the vector page.

Signed-off-by: Rob Herring <robh@kernel.org>
[kees: fixed CONFIG_DEBUG_HIGHMEM get_fixmap() calls]
[kees: moved pte allocation outside of CONFIG_HIGHMEM]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
2014-10-16 14:38:52 -07:00
Linus Torvalds
eb785bef68 ARM: SoC DT updates for 3.18
As usual, this is the largest branch, though this time a little under
 half of the total changes with 307 individual non-merge changesets.
 
 The largest changes are the addition of new machines, in particular
 the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
 for the old i.MX1 platform.
 
 Other changes include
 - at91: various sam9 and sama5 updates
 - exynos: much extended Peach Pi/Pit (Chromebook 2) support
 - keystone: new peripherals
 - meson: added DT for meson6 SoC
 - mvebu: new device support for Armada 370/375
 - qcom: improved support for IPQ8064 and MSM8x60
 - rockchip: much improved support for rk3288
 - shmobile: lots of updates all over the place
 - sunxi: dts license change
 - sunxi: more a23 device support
 - vexpress: CLCD DT description
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWVG2CrR//JCVInAQJmARAAnU2I4VpJHlBeHC4CYr/GdRq0NqiFvQ38
 7N/zevUI4l150DtejltbOX71JGM9vD3hq8VXZYBCEpTbG4el9PzAq28Fomtt4tmC
 PGbczQY8ZMvY1/MOT3XLZAd3TSUL0TZRt97t9bdLif6QyPafel5o2pd8D2OG7h+L
 Awtyk9LobT9jU3muFX3ZUfB3Gg2sNKphZjox9Le3gVjGd6g5teEqqMAehK2Y7ArJ
 kixrKck4vgduDdZe59o2yApAUsfIQv/joqu68jv3MUQrKmk4s543+rIdGDuLF5bz
 mEo7qtMXujoNaF3CyLYNEF2ZExIOJDdtmrwjHY8oKIFtIeI/faIJmeSChwa6794t
 Njj5bbnL0Pt61l4gUSFk2hUFo28gpiEB+Mm0R4E1hdoG15Iv6E+lpy44EmEmfz1c
 9h0sATNGUrz18IrUk7jI1WwIaEJUwkbZ+8wKuWtvH+Z+mFA4ZlDykVcnVuELixpb
 vKmI3kcmEw2RsJjkYq3LcgXXQevE4mHRR1ow59yXTY6OR1LmVb7odKUwbrweofQO
 eytVb1deMeYXrBXT5/j6WmrlyDbYcuGsjO4WidT+zwYUiAMCE6bTpNwUWqumVEUv
 LjCBaN6BRIb89EBwt4xIvIu7ir9hNNRZnD8aa4afSzIYxknzZy73pjjT2+wu7jbU
 m15TwYyQG4E=
 =2Sq1
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, this is the largest branch, though this time a little under
  half of the total changes with 307 individual non-merge changesets.

  The largest changes are the addition of new machines, in particular
  the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
  for the old i.MX1 platform.

  Other changes include
   - at91: various sam9 and sama5 updates
   - exynos: much extended Peach Pi/Pit (Chromebook 2) support
   - keystone: new peripherals
   - meson: added DT for meson6 SoC
   - mvebu: new device support for Armada 370/375
   - qcom: improved support for IPQ8064 and MSM8x60
   - rockchip: much improved support for rk3288
   - shmobile: lots of updates all over the place
   - sunxi: dts license change
   - sunxi: more a23 device support
   - vexpress: CLCD DT description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits)
  ARM: DTS: meson: update DTSI to add watchdog node
  ARM: dts: keystone-k2l: fix mdio io start address
  ARM: dts: keystone-k2e: fix mdio io start address
  ARM: dts: keystone-k2e: update usb1 node for dma properties
  ARM: dts: keystone: fix io range for usb_phy0
  Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
  Revert "ARM: dts: hix5hd2: add wdg node"
  ARM: dts: add rk3288 i2s controller
  ARM: vexpress: Add CLCD Device Tree properties
  ARM: bcm2835: add I2S pinctrl to device tree
  ARM: meson: documentation: add bindings documentation
  ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
  ARM: dts: mt6589: Change compatible string for GIC
  ARM: dts: mediatek: Add compatible property for aquaris5
  ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk
  ARM: dts: mt6589: Fix typo in GIC unit address
  ARM: dts: Build dtb for Mediatek board
  ARM: dts: keystone: fix bindings for pcie and usb clock nodes
  ARM: dts: keystone: k2l: Fix chip selects for SPI devices
  ARM: dts: keystone: add dsp gpio controllers nodes
  ...
2014-10-08 17:22:23 -04:00
Peter Foley
c5e2a7e012 Documentation: update .gitignore files
Add some missing files to .gitignore.
Push Documentation/.gitignore down into subdirectories.

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-26 11:02:59 +02:00
Peter Foley
8c2b0dc83d Documentation: support glibc versions without htole macros
glibc 2.9 introduced the htole<16/32/64> macros, add them to
tools/include to support older versions of glibc.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-26 11:02:58 +02:00
Peter Foley
0421fc837c Documentation: make functions static to avoid prototype warnings
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-26 11:02:56 +02:00
Peter Foley
adb19fb66e Documentation: add makefiles for more targets
Add a bunch of previously unbuilt source files to the Documentation build
machinery.

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-26 11:02:56 +02:00
Thomas Petazzoni
feb60beacd Documentation: arm: add hardware datasheet reference for Marvell Armada XP
Some time ago, the "Function Specifications" for the Marvell Armada XP
processor has been released. However, the "Hardware Specifications"
were not released at the same time. They have now been released
publicly, so this commit updates the Marvell documentation file with
the references to this new documentation.

Three documents are available, one for each of the three variants of
Armada XP: 78230, 78260 and 78460.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1410896277-32476-1-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-17 15:00:41 +00:00
Linus Torvalds
10c8e05620 ARM: SoC driver changes for 3.17
A handful of driver-related changes. We've had a bunch of them going in through
 other branches as well, so it's only a part of what we really have this release.
 
 Larger pieces are:
 
 * Removal of a now unused PWM driver for atmel
   - This includes AVR32 changes that have been appropriately acked.
 * Performance counter support for the arm CCN interconnect
 * OMAP mailbox driver cleanups and consolidation
 * PCI and SATA PHY drivers for SPEAr 13xx platforms
 * Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to
   better model regulators/power.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DrJAAoJEIwa5zzehBx3wkkP/iwEfEK5mMon9KEe4DcKTKNq
 Z6xyWuMQNHKdfBFpABs6AsHQCKDc7KK6gN3+2zLLHEJ4XGDPZ2g2NaX3oRPJlaay
 BDK7rQfIZyi4tmbOnlEv1BDTYgirYBPMwk9RyNo/04Ug3W+Y67aSVo44zkNFBWaJ
 GbcX/zYsrsfvdawuQMW6V/A835s3Kq5Zhv1ikPr8gDDjswZRBAT6i7FYpBSHQ8K8
 bH6C1891Xit6rxXSLXJyrtM8CAet7PtLTqNr/IKdUaJnGD+fJm5EonxW+g8gvhN8
 gOEkm3nM60++kdDlzZCQVNr0m1+ih6NNCr6bDLO6rIRpAJM2O+YrN1rWuZaJOu1A
 pIvifk+wWHT+o52pXk8g9fK4n/ZJydK3IBzDePHMrIROOEiW5tLE3WA+u3NSfMfH
 WegMt9E2dcB+5gXPeejZ9gFbAHnh2S1oVTZfCYXtuOHrYiEU9U0FA3eRYvJEE2po
 k8sdiOn7Vc65O1QZ+xZNbLABpAHaye7X2evOJyhSutzHE/AtUvT4vuCAZ0tggXyD
 E1qVKngVW/NvcoFbwYeidq4bOVgiAEn3idZgF5gEq1mq7LzetXUQAcZAOQfLWHLQ
 RrXufS7Ez8pSCG74y0AFReVfQH2PgWHPqGUGj99NXgQauexc/vR1Hc5Iqb8liGNJ
 n6i8RqvvQ4KYcmHEXDIT
 =fsP6
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "A handful of driver-related changes.  We've had a bunch of them going
  in through other branches as well, so it's only a part of what we
  really have this release.

  Larger pieces are:

   - Removal of a now unused PWM driver for atmel
     [ This includes AVR32 changes that have been appropriately acked ]
   - Performance counter support for the arm CCN interconnect
   - OMAP mailbox driver cleanups and consolidation
   - PCI and SATA PHY drivers for SPEAr 13xx platforms
   - Redefinition (with backwards compatibility!) of PCI DT bindings for
     Tegra to better model regulators/power"

Note: this merge also fixes up the semantic conflict with the new
calling convention for devm_phy_create(), see commit f0ed817638 ("phy:
core: Let node ptr of PHY point to PHY and not of PHY provider") that
came in through Greg's USB tree.

Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through
the next tree.

* tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: arm-ccn: Fix error handling at event allocation
  mailbox/omap: add a parent structure for every IP instance
  mailbox/omap: remove the private mailbox structure
  mailbox/omap: consolidate OMAP mailbox driver
  mailbox/omap: simplify the fifo assignment by using macros
  mailbox/omap: remove omap_mbox_type_t from mailbox ops
  mailbox/omap: remove OMAP1 mailbox driver
  mailbox/omap: use devm_* interfaces
  bus: ARM CCN: add PERF_EVENTS dependency
  bus: ARM CCN PMU driver
  PCI: spear: Remove spear13xx_pcie_remove()
  PCI: spear: Fix Section mismatch compilation warning for probe()
  ARM: tegra: Remove legacy PCIe power supply properties
  PCI: tegra: Remove deprecated power supply properties
  PCI: tegra: Implement accurate power supply scheme
  ARM: SPEAr13xx: Update defconfigs
  ARM: SPEAr13xx: Add pcie and miphy DT nodes
  ARM: SPEAr13xx: Add bindings and dt node for misc block
  ARM: SPEAr13xx: Fix static mapping table
  phy: Add drivers for PCIe and SATA phy on SPEAr13xx
  ...
2014-08-08 11:34:32 -07:00
Arnd Bergmann
39fbf98408 mvebu SoC changes for v3.17 (round 4)
- Armada XP
     - Fix return value check in pmsu code
     - Document URLs for new public datasheets (Thanks, Marvell & free-electrons!)
 
  - Armada 370/38x
     - Add cpuidle support
 
  - mvebu
     - Fix build when no platforms are selected
     - Update EBU SoC status in docs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJT0kjkAAoJEP45WPkGe8ZnqpsQALFvbZKqBmvm+dj4G/dB9YYg
 ihJM1FasU5yrHWhQlUSJw3Lntf/WwK2Qbrq3NmeCNo9qxx5r3IOv8inLah+XsXWv
 C4RyiqmbnbiUg24QwHHGHLnRZuKCZdciiCyVmDO5DxRiT7Ov7EffOiiEws1WIUU1
 6os30LEp82UpfcUkevJi12AkQvgTcX8tQXN2Kc7TgbxzJcyOt9M03BUej9gDdqD3
 XfeBZv/WTapZllifRF04zsVJUtPKx48BmR0KdInYlsRfjg7knbYb1qkC7iysPJvv
 G2XPWYOTVC7bbY+ZRfDcreowcTbBxXNiVbtPMM0+5kfli76/thPFutlA9/hi5plR
 WeGa6V+M61RMdOexg9C/lVIpdqXLpI1xINlRv4vyjalm28JgvzAoucaaFnY6Rdxt
 ApDIbhHzYCWyHwMn9DXi5s2nhMFL7i7JXCL/iDySzZB+ZNSKd+ULn1AhTOnOjFSL
 jU7S9htD8tNZ7MuTX1Jg6gsuGxH1yr8x6kUX99DymUiYlKT7XbrXPa3Xf9vS8dx+
 j0y7J6aJET7dlReH3tScehKOjnt44Djwgb9HiEilMNNYCWUQkKwxZCxnDQ6xNFCV
 COXfu+nx87yVbBhSlJH+m0hQbf3jBmx/vuKnjYLRrZ/ATeWv/uWd78G2tZV7ercU
 AiXn0eiPzFWML9isjqzd
 =y40Y
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu into next/soc

Merge "mvebu SoC changes for v3.17 (round 4)" from Jason Cooper:

 - Armada XP
    - Fix return value check in pmsu code
    - Document URLs for new public datasheets (Thanks, Marvell & free-electrons!)

 - Armada 370/38x
    - Add cpuidle support

 - mvebu
    - Fix build when no platforms are selected
    - Update EBU SoC status in docs

* tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu: (21 commits)
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ARM: mvebu: make the snoop disabling optional in mvebu_v7_pmsu_idle_prepare()
  ARM: mvebu: use a local variable to store the resume address
  ARM: mvebu: make the cpuidle initialization more generic
  ARM: mvebu: rename the armada_370_xp symbols to mvebu_v7 in pmsu.c
  ARM: mvebu: use the common function for Armada 375 SMP workaround
  ARM: mvebu: add a common function for the boot address work around
  ARM: mvebu: sort the #include of pmsu.c in alphabetic order
  ARM: mvebu: split again armada_370_xp_pmsu_idle_enter() in PMSU code
  ARM: mvebu: fix return value check in armada_xp_pmsu_cpufreq_init()
  clk: mvebu: extend clk-cpu for dynamic frequency scaling
  ARM: mvebu: extend PMSU code to support dynamic frequency scaling
  ...

Conflicts:
	arch/arm/mach-mvebu/Kconfig
	drivers/cpuidle/cpuidle-armada-370-xp.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26 18:17:08 +02:00
Arnd Bergmann
f169f4007e Linux 3.16-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTzJFGAAoJEHm+PkMAQRiGNzQH/087gQch5K+A2HKvPzjUXq57
 G82DJHLONMMq8+NY3Vqhp8g2V8zRbXGJEvMJMsyuscO37Vo7ADcrYo8lqY9w5bIl
 h+Zarhkqz0rqRs2SfMMIVzdd2W7MzL+lqj3GplGPxHztw0+qk7PRKILx6eRppGaH
 JaD4NfkD5+1vfve/2d1ze9D5pCiw6PFNzjesKZxScQhNhIyLdRamfSTY4r9XeURo
 CxpwjphEYfvAcgc39mwzEHPHyKSqULu0By6R8FXQpJ9QjVtzcGEiF+cPqGncpZOR
 5ZSyU5e1CpBl9w8o6Lm9ewXmaCSnBU/VFrOwWvZrXfokZedXBOz7KdShU93XFjU=
 =0VJM
 -----END PGP SIGNATURE-----

Merge branches 'samsung/cleanup' and 'samsung/s5p-cleanup-v2', tag 'v3.16-rc6' into next/soc

The following samsung branches are based on these cleanups,
which are already in mainline before this branch gets pulled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26 11:59:20 +02:00
Thomas Petazzoni
b6e9f52190 Documentation: arm: misc updates to Marvell EBU SoC status
Following the merging of mach-kirkwood into mach-mvebu, the removal of
mach-kirkwood, and the progress of the integration of mach-dove into
mach-mvebu, this commit makes a few updates to the Marvell README file
in the kernel documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1406227593-29749-3-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-25 00:13:13 +00:00
Thomas Petazzoni
35d324d625 Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
Marvell has very recently released a public version of the "Functional
specifications" and "Hardware specifications" datasheets for the
Marvell Armada XP SoC. This allows contributors and developers not
under NDA with Marvell to get more details about this SoC than what
the current kernel code shows, and hopefully allows to improve the
support for this SoC in the mainline kernel, as well as in other
projects.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1406227593-29749-2-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-25 00:13:00 +00:00
Pawel Moll
a33b0daab7 bus: ARM CCN PMU driver
Driver providing perf backend for ARM Cache Coherent Network
interconnect. Supports counting all hardware events and crosspoint
watchpoints.

Currently works with CCN-504 only, although there should be
no changes required for CCN-508 (just impossible to test it now).

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-23 22:14:43 +02:00
Kukjin Kim
b8529ec1c1 ARM: S5PC100: no more support S5PC100 SoC
This patch removes supporting codes for s5pc100 because no more used
now.

[jason@lakedaemon.net: for drivers/irqchip/Kconfig]
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-13 07:35:11 +09:00
Kukjin Kim
070b8b436b ARM: S5P64X0: no more support S5P6440 and S5P6450 SoCs
This patch removes supporting codes for s5p6440 and s5p6450 because
seems no more used now. And if its supporting is required, DT based
codes should be supprted next time.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-08 07:06:19 +09:00
Thomas Petazzoni
a178050a0e Documentation: arm: add URLs to public datasheets for the Marvell Armada 370 SoC
Marvell has very recently released a public version of the "Functional
specifications" and "Hardware specifications" datasheets for the
Marvell Armada 370 SoC. This allows contributors and developers not
under NDA with Marvell to get more details about this SoC than what
the current kernel code shows, and hopefully allows to improve the
support for this SoC in the mainline kernel, as well as in other
projects.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1402413878-20224-2-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-21 00:44:06 +00:00
Linus Torvalds
eb3d3ec567 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
Pull ARM updates from Russell King:

 - Major clean-up of the L2 cache support code.  The existing mess was
   becoming rather unmaintainable through all the additions that others
   have done over time.  This turns it into a much nicer structure, and
   implements a few performance improvements as well.

 - Clean up some of the CP15 control register tweaks for alignment
   support, moving some code and data into alignment.c

 - DMA properties for ARM, from Santosh and reviewed by DT people.  This
   adds DT properties to specify bus translations we can't discover
   automatically, and to indicate whether devices are coherent.

 - Hibernation support for ARM

 - Make ftrace work with read-only text in modules

 - add suspend support for PJ4B CPUs

 - rework interrupt masking for undefined instruction handling, which
   allows us to enable interrupts earlier in the handling of these
   exceptions.

 - support for big endian page tables

 - fix stacktrace support to exclude stacktrace functions from the
   trace, and add save_stack_trace_regs() implementation so that kprobes
   can record stack traces.

 - Add support for the Cortex-A17 CPU.

 - Remove last vestiges of ARM710 support.

 - Removal of ARM "meminfo" structure, finally converting us solely to
   memblock to handle the early memory initialisation.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits)
  ARM: ensure C page table setup code follows assembly code (part II)
  ARM: ensure C page table setup code follows assembly code
  ARM: consolidate last remaining open-coded alignment trap enable
  ARM: remove global cr_no_alignment
  ARM: remove CPU_CP15 conditional from alignment.c
  ARM: remove unused adjust_cr() function
  ARM: move "noalign" command line option to alignment.c
  ARM: provide common method to clear bits in CPU control register
  ARM: 8025/1: Get rid of meminfo
  ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type
  ARM: 8066/1: correction for ARM patch 8031/2
  ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation
  ARM: 8065/1: remove last use of CONFIG_CPU_ARM710
  ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction
  ARM: 8047/1: rwsem: use asm-generic rwsem implementation
  ARM: l2c: trial at enabling some Cortex-A9 optimisations
  ARM: l2c: add warnings for stuff modifying aux_ctrl register values
  ARM: l2c: print a warning with L2C-310 caches if the cache size is modified
  ARM: l2c: remove old .set_debug method
  ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this
  ...
2014-06-05 15:57:04 -07:00
Linus Torvalds
c3c55a0720 Merge branch 'arm64-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull ARM64 EFI update from Peter Anvin:
 "By agreement with the ARM64 EFI maintainers, we have agreed to make
  -tip the upstream for all EFI patches.  That is why this patchset
  comes from me :)

  This patchset enables EFI stub support for ARM64, like we already have
  on x86"

* 'arm64-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64: efi: only attempt efi map setup if booting via EFI
  efi/arm64: ignore dtb= when UEFI SecureBoot is enabled
  doc: arm64: add description of EFI stub support
  arm64: efi: add EFI stub
  doc: arm: add UEFI support documentation
  arm64: add EFI runtime services
  efi: Add shared FDT related functions for ARM/ARM64
  arm64: Add function to create identity mappings
  efi: add helper function to get UEFI params from FDT
  doc: efi-stub.txt updates for ARM
  lib: add fdt_empty_tree.c
2014-06-05 13:15:32 -07:00
Nicolas Pitre
437b680a22 ARM: 8066/1: correction for ARM patch 8031/2
A small mistake slipped through in memory.txt.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-01 01:13:18 +01:00
Olof Johansson
e469d6ba0a Despite relatively young Berlin SoC support, we already have support
for a BG2Q SoC provided by Alexandre Belloni and Antoine Tenart. Also,
 we gained support for DW gpio and a pinctrl driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTem9rAAoJEN2kpao7fSL44MoP/2gKwUDNdYkUD4eM0fz56e5Y
 dLt/OyOtiUxIDw4jb6iKv0ldMOlkzaY713tIqtN1GVURW5Nyv0vgpyAle7NVNHuP
 hw+gFAuD0cJvmKXb4/RYGsuRD1xJ3agnALqTA3hu/5QPCU6+uOjipRNBity8KX62
 hjGcvwr5OBezfeONbubPp6Zl+5R0v/gPLaZIeDyTMWNpMSSuiPrxfer0VoEw0C9O
 6WOoSStkxi81mxAPuxRvKFZ2RaHowDNWFRm0sTRnE2svywe5w/IathAJHtnTjGV4
 Ug1aL9Ng5L09FrYSX6YeTEoyN3huucRWx3eIXDZdtS9P5ReaILWyat+w3ewkLWBr
 b1gXijfeHHVmAhlBZUkdP0zPGh4pifTJPMlX5Sd1yE61i/qOj3PcduixocIsDGrO
 htUJCqf3RFLpqoe2ReZ5cSXkHPz4/t31mdhqCK48zlyBzAZslpVYEyYiNyUM+6Q8
 HnpCAbKc/BvykcLYlrtHJm3pHbzMQGQeqoyOdBET1bY8ejXW6NF874MJPvOMqW+l
 tr6AzDWIikOGJ+rsH9asjg4RnmQQgHEQ0tSY9yvRyP7GfhEeIwijqlTvTR9gQQfa
 3C9f+ay+Uu+aXnJZgeQWxccxJE1vU0wCbtrSpa4+jDkQB8KIP9ZArLht7Ku+0i1c
 9/vYRdQhDqlbtQc2kmqw
 =HJNa
 -----END PGP SIGNATURE-----

Merge tag 'berlin-soc-3.16' of https://github.com/shesselba/linux-berlin into next/soc

Merge "ARM: berlin: SoC changes for v3.16" from Sebastian Hesselbart:

Despite relatively young Berlin SoC support, we already have support
for a BG2Q SoC provided by Alexandre Belloni and Antoine Tenart. Also,
we gained support for DW gpio and a pinctrl driver.

* tag 'berlin-soc-3.16' of https://github.com/shesselba/linux-berlin:
  ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs
  ARM: berlin: add the LIBGPIO as a dependency for the BG2Q
  ARM: berlin: add MACH_BERLIN_BG2Q symbol
  ARM: berlin: add Marvell Armada 1500 pro to Marvell doc

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-26 13:41:02 -07:00
Antoine Tenart
af987718f0 ARM: berlin: add Marvell Armada 1500 pro to Marvell doc
This adds Marvell Berlin Armada 1500 Pro (BG2Q) to Marvell SoC documentation.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-05-19 22:52:05 +02:00
Maxime Coquelin
c6594025c0 ARM: STi: Add STiH407 SoC support
This patch adds support to STiH407 SoC.

Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-05-17 10:22:30 +02:00
Leif Lindholm
e1977464e8 doc: arm: add UEFI support documentation
This patch provides documentation of the [U]EFI runtime service and
configuration features for the arm architecture.

Cc: Rob Landley <rob@landley.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-30 19:57:01 +01:00
Liu Hua
a05e54c103 ARM: 8031/2: change fixmap mapping region to support 32 CPUs
In 32-bit ARM systems, the fixmap mapping region can support no more
than 14 CPUs(total: 896k; one CPU: 64K). And we can configure NR_CPUS
up to 32. So there is a mismatch.

This patch moves fixmapping region downwards to region 0xffc00000-
0xffe00000. Then the fixmap mapping region can support up to 32 CPUs.

Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23 11:09:42 +01:00
Nicolas Pitre
64d3b6a3f4 ARM: 8023/1: remove remnants of the static DMA mapping
It looks like the static mapping area for DMA was replaced by dynamic
allocation into the vmalloc area by commit e9da6e9905 but the
information in Documentation/arm/memory.txt was not removed accordingly.

CONSISTENT_END in arch/arm/include/asm/memory.h has no more users and
can be removed as well.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23 01:24:33 +01:00
Arnd Bergmann
88dbede1da mvebu new SoCs for v3.15
- mvebu
     - initial support for Armada 375, 380, and 385
 
 Depends:
  - tags/mvebu-soc-3.15 (resolves delete/rename hidden conflict)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTCEYEAAoJEP45WPkGe8ZnOcwP/01XcyweSLF5N2eIAoIN7jJC
 NGE/MAV0loUbMGoIIHIvjcphLyok2XBGeLZSp8hc3oknAk/w7rmV6C/chvlo7Dcr
 lP773QI0CoFFj/QcJOlCifI+TZeNlT8ffWBn/PjzPiGPyA3VGU+E9dUoMSeJOfDH
 nE4XLIDEoQfjNtGScmmOT3tWYs4MeJ5UOUP32ZFxQXOgzPmoIqMLLASVHfQTmSVS
 QG7zIyfwEKT5FvAAc7cvo8Z+x6y1SR2ZGLPT8l0Cfd8i8hzk+rbxOJrnvMccSU/e
 ASwwKxlGtw+lDjwk9+pKVaoBzls7KifBA5iQLkoU+5/mv8J2zIdtBZWSxCB1/N85
 jnFGCsQCYDiMv8+JqoBaAl0OXO5q+n42rQa/IMm+quxvTn4FDWn7rUwsgjCJeTH2
 0f1+1glFEvFGeKd6oxy60i7JBirnCWWkLthQf6rmW2UAF5Zv2tUgNs5i4r23ulor
 gZH0q5VEPVdecdlG4BtIUoGHJpm7bBw9VRS6sviVXM0RZuT0k4pgCR0wOO1Es14Q
 uROkkjOWuONAZLfcUO3Y6AevSfvrB8paforGpoUj6mZtvDbfEsgy7REt2bGYoEaL
 dKlzQP7CWIP8Jl9ENXj4IpJOXEkWTmkHLS4pc0NZBTFpw2AqbtZXFP8qvYWE6Qt/
 dXPcA3o+Ru166LvNSPi1
 =LIE3
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu into next/soc

Merge "mvebu new SoCs for v3.15" from Jason Cooper:

 - mvebu
    - initial support for Armada 375, 380, and 385

Depends:
 - tags/mvebu-soc-3.15 (resolves delete/rename hidden conflict)

* tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu:
  Documentation: arm: update Marvell documentation about Armada 375/38x
  ARM: mvebu: add initial support for the Armada 380/385 SOCs
  ARM: mvebu: add workaround for data abort issue on Armada 375
  ARM: mvebu: add initial support for the Armada 375 SOCs
  ARM: mvebu: add Armada 375 support to the system-controller driver
  ARM: mvebu: make CPU_PJ4B selection a per-SoC choice
  ARM: mvebu: rename DT machine structure for Armada 370/XP
  ARM: mvebu: rename armada-370-xp.c to board-v7.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-25 18:34:42 +01:00
Thomas Petazzoni
bc81526f37 Documentation: arm: update Marvell documentation about Armada 375/38x
This commit updates the documentation that describes the various
families of SOCs produced by Marvell, together with the corresponding
available technical documents. It adds Armada 375 and Armada 38x, and
adds a link to the product brief for the already supported Armada 370.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 00:44:00 +00:00
Henrik Austad
3cf8ca1c25 Documentation/: update 00-INDEX files
Some of the 00-INDEX files are somewhat outdated and some folders does
not contain 00-INDEX at all.  Only outdated (with the notably exception
of spi) indexes are touched here, the 169 folders without 00-INDEX has
not been touched.

New 00-INDEX
 - spi/* was added in a series of commits dating back to 2006

Added files (missing in (*/)00-INDEX)
 - dmatest.txt was added by commit 851b7e16a0 ("dmatest: run test via
   debugfs")
 - this_cpu_ops.txt was added by commit a1b2a555d6 ("percpu: add
   documentation on this_cpu operations")
 - ww-mutex-design.txt was added by commit 040a0a3710 ("mutex: Add
   support for wound/wait style locks")
 - bcache.txt was added by commit cafe563591 ("bcache: A block layer
   cache")
 - kernel-per-CPU-kthreads.txt was added by commit 49717cb404
   ("kthread: Document ways of reducing OS jitter due to per-CPU
   kthreads")
 - phy.txt was added by commit ff76496347 ("drivers: phy: add generic
   PHY framework")
 - block/null_blk was added by commit 12f8f4fc03 ("null_blk:
   documentation")
 - module-signing.txt was added by commit 3cafea3076 ("Add
   Documentation/module-signing.txt file")
 - assoc_array.txt was added by commit 3cb989501c ("Add a generic
   associative array implementation.")
 - arm/IXP4xx was part of the initial repo
 - arm/cluster-pm-race-avoidance.txt was added by commit 7fe31d28e8
   ("ARM: mcpm: introduce helpers for platform coherency exit/setup")
 - arm/firmware.txt was added by commit 7366b92a77 ("ARM: Add
   interface for registering and calling firmware-specific operations")
 - arm/kernel_mode_neon.txt was added by commit 2afd0a0524 ("ARM:
   7825/1: document the use of NEON in kernel mode")
 - arm/tcm.txt was added by commit bc581770cf ("ARM: 5580/2: ARM TCM
   (Tightly-Coupled Memory) support v3")
 - arm/vlocks.txt was added by commit 9762f12d3e ("ARM: mcpm: Add
   baremetal voting mutexes")
 - blackfin/gptimers-example.c, Makefile was added by commit
   4b60779d5e ("Blackfin: add an example showing how to use the
   gptimers API")
 - devicetree/usage-model.txt was added by commit 31134efc68 ("dt:
   Linux DT usage model documentation")
 - fb/api.txt was added by commit fb21c2f428 ("fbdev: Add FOURCC-based
   format configuration API")
 - fb/sm501.txt was added by commit e6a0498071 ("video, sm501: add
   edid and commandline support")
 - fb/udlfb.txt was added by commit 96f8d864af ("fbdev: move udlfb out
   of staging.")
 - filesystems/Makefile was added by commit 1e0051ae48
   ("Documentation/fs/: split txt and source files")
 - filesystems/nfs/nfsd-admin-interfaces.txt was added by commit
   8a4c6e19cf ("nfsd: document kernel interfaces for nfsd
   configuration")
 - ide/warm-plug-howto.txt was added by commit f74c91413e ("ide: add
   warm-plug support for IDE devices (take 2)")
 - laptops/Makefile was added by commit d49129accc
   ("Documentation/laptop/: split txt and source files")
 - leds/leds-blinkm.txt was added by commit b54cf35a7f ("LEDS: add
   BlinkM RGB LED driver, documentation and update MAINTAINERS")
 - leds/ledtrig-oneshot.txt was added by commit 5e417281cd ("leds: add
   oneshot trigger")
 - leds/ledtrig-transient.txt was added by commit 44e1e9f8e7 ("leds:
   add new transient trigger for one shot timer activation")
 - m68k/README.buddha was part of the initial repo
 - networking/LICENSE.(qla3xxx|qlcnic|qlge) was added by commits
   40839129f7, c4e84bde1d, 5a4faa8737
 - networking/Makefile was added by commit 3794f3e812 ("docsrc: build
   Documentation/ sources")
 - networking/i40evf.txt was added by commit 105bf2fe6b ("i40evf: add
   driver to kernel build system")
 - networking/ipsec.txt was added by commit b3c6efbc36 ("xfrm: Add
   file to document IPsec corner case")
 - networking/mac80211-auth-assoc-deauth.txt was added by commit
   3cd7920a2b ("mac80211: add auth/assoc/deauth flow diagram")
 - networking/netlink_mmap.txt was added by commit 5683264c39
   ("netlink: add documentation for memory mapped I/O")
 - networking/nf_conntrack-sysctl.txt was added by commit c9f9e0e159
   ("netfilter: doc: add nf_conntrack sysctl api documentation") lan)
 - networking/team.txt was added by commit 3d249d4ca7 ("net: introduce
   ethernet teaming device")
 - networking/vxlan.txt was added by commit d342894c5d ("vxlan:
   virtual extensible lan")
 - power/runtime_pm.txt was added by commit 5e928f77a0 ("PM: Introduce
   core framework for run-time PM of I/O devices (rev.  17)")
 - power/charger-manager.txt was added by commit 3bb3dbbd56
   ("power_supply: Add initial Charger-Manager driver")
 - RCU/lockdep-splat.txt was added by commit d7bd2d68aa ("rcu:
   Document interpretation of RCU-lockdep splats")
 - s390/kvm.txt was added by 5ecee4b (KVM: s390: API documentation)
 - s390/qeth.txt was added by commit b4d72c08b3 ("qeth: bridgeport
   support - basic control")
 - scheduler/sched-bwc.txt was added by commit 88ebc08ea9 ("sched: Add
   documentation for bandwidth control")
 - scsi/advansys.txt was added by commit 4bd6d7f356 ("[SCSI] advansys:
   Move documentation to Documentation/scsi")
 - scsi/bfa.txt was added by commit 1ec90174bd ("[SCSI] bfa: add
   readme file")
 - scsi/bnx2fc.txt was added by commit 12b8fc10ea ("[SCSI] bnx2fc: Add
   driver documentation")
 - scsi/cxgb3i.txt was added by commit c3673464eb ("[SCSI] cxgb3i: Add
   cxgb3i iSCSI driver.")
 - scsi/hpsa.txt was added by commit 992ebcf14f ("[SCSI] hpsa: Add
   hpsa.txt to Documentation/scsi")
 - scsi/link_power_management_policy.txt was added by commit
   ca77329fb7 ("[libata] Link power management infrastructure")
 - scsi/osd.txt was added by commit 78e0c621de ("[SCSI] osd:
   Documentation for OSD library")
 - scsi/scsi-parameter.txt was created/moved by commit 163475fb11
   ("Documentation: move SCSI parameters to their own text file")
 - serial/driver was part of the initial repo
 - serial/n_gsm.txt was added by commit 323e84122e ("n_gsm: add a
   documentation")
 - timers/Makefile was added by commit 3794f3e812 ("docsrc: build
   Documentation/ sources")
 - virt/kvm/s390.txt was added by commit d9101fca3d ("KVM: s390:
   diagnose call documentation")
 - vm/split_page_table_lock was added by commit 49076ec2cc ("mm:
   dynamically allocate page->ptl if it cannot be embedded to struct
   page")
 - w1/slaves/w1_ds28e04 was added by commit fbf7f7b4e2 ("w1: Add
   1-wire slave device driver for DS28E04-100")
 - w1/masters/omap-hdq was added by commit e0a29382c6 ("hdq:
   documentation for OMAP HDQ")
 - x86/early-microcode.txt was added by commit 0d91ea86a8 ("x86, doc:
   Documentation for early microcode loading")
 - x86/earlyprintk.txt was added by commit a1aade4788 ("x86/doc:
   mini-howto for using earlyprintk=dbgp")
 - x86/entry_64.txt was added by commit 8b4777a4b5 ("x86-64: Document
   some of entry_64.S")
 - x86/pat.txt was added by commit d27554d874 ("x86: PAT
   documentation")

Moved files
 - arm/kernel_user_helpers.txt was moved out of arch/arm/kernel by
   commit 37b8304642 ("ARM: kuser: move interface documentation out of
   the source code")
 - efi-stub.txt was moved out of x86/ and down into Documentation/ in
   commit 4172fe2f8a ("EFI stub documentation updates")
 - laptops/hpfall.c was moved out of hwmon/ and into laptops/ in commit
   efcfed9bad ("Move hp_accel to drivers/platform/x86")
 - commit 5616c23ad9 ("x86: doc: move x86-generic documentation from
   Doc/x86/i386"):
   * x86/usb-legacy-support.txt
   * x86/boot.txt
   * x86/zero_page.txt
 - power/video_extension.txt was moved to acpi in commit 70e66e4df1
   ("ACPI / video: move video_extension.txt to Documentation/acpi")

Removed files (left in 00-INDEX)
 - memory.txt was removed by commit 00ea8990aa ("memory.txt: remove
   stray information")
 - gpio.txt was moved to gpio/ in commit fd8e198cfc ("Documentation:
   gpiolib: document new interface")
 - networking/DLINK.txt was removed by commit 168e06ae26
   ("drivers/net: delete old parallel port de600/de620 drivers")
 - serial/hayes-esp.txt was removed by commit f53a2ade0b ("tty: esp:
   remove broken driver")
 - s390/TAPE was removed by commit 9e280f6693 ("[S390] remove tape
   block docu")
 - vm/locking was removed by commit 57ea8171d2 ("mm: documentation:
   remove hopelessly out-of-date locking doc")
 - laptops/acer-wmi.txt was remvoed by commit 020036678e ("acer-wmi:
   Delete out-of-date documentation")

Typos/misc issues
 - rpc-server-gss.txt was added as knfsd-rpcgss.txt in commit
   030d794bf4 ("SUNRPC: Use gssproxy upcall for server RPCGSS
   authentication.")
 - commit b88cf73d92 ("net: add missing entries to
   Documentation/networking/00-INDEX")
   * generic-hdlc.txt was added as generic_hdlc.txt
   * spider_net.txt was added as spider-net.txt
 - w1/master/mxc-w1 was added as mxc_w1 by commit a5fd9139f7 ("w1: add
   1-wire master driver for i.MX27 / i.MX31")
 - s390/zfcpdump.txt was added as zfcpdump by commit 6920c12a40
   ("[S390] Add Documentation/s390/00-INDEX.")

Signed-off-by: Henrik Austad <henrik@austad.us>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>	[rcu bits]
Acked-by: Rob Landley <rob@landley.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Len Brown <len.brown@intel.com>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:40 -08:00
Linus Torvalds
dfd10e7ae6 ARM: SoC platform changes for 3.14
New core SoC-specific changes.
 
 New platforms:
 * Introduction of a vendor, Hisilicon, and one of their SoCs with some
   random numerical product name.
 * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU).
 * Marvell Berlin series of SoCs, which include the one in Chromecast.
 * MOXA platform support, ARM9-based platform used mostly in industrial products
 * Support for Freescale's i.MX50 SoC.
 
 Other work:
 * Renesas work for new platforms and drivers, and conversion over to
   more multiplatform-friendly device registration schemes.
 * SMP support for Allwinner sunxi platforms.
 * ... plus a bunch of other stuff across various platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4VggAAoJEIwa5zzehBx3YkEP/j/Vp83zPcPijb8CNLUGJ9rK
 RTOW9hlLbwCGAcIi/32XVjup1ylTzQuwKpH2R6Sf2GRcmXI1HbCCyDSGKWq+eK9C
 vDRoWiU9DVRmXuaC7R1dscLS1qSobVoI80bOstblZW65799z48IllD7rJA1BzDIg
 vUy4knY9hO39DK7sJymXTBJepWxXJHMaYmr15xuxbaR3Qsp8zisqyzMwLqVfBwFB
 FyPr2PfxU8HJOoWhIsVo+679pmb9tHD6our0HG/lHSuPcRO/3UwN+VD87SwfpjNx
 P7qiRFkIoMooiTRmjwPPNbMZBJHl6vBR1RWHmws5s9aay1DDhdvQURxKx4bNaN/A
 UzwiestopISLChd9jqjxTbngl1mvLaL9JwBjRVAkXG4vJJFrhwqvmcMrlszA3ueR
 2Th/NBk0b2s8ncAuT7bFe4i/H7es8aI/D2weF3FxRGgpan/B0T0UDAKO+rrMYZ0q
 1ZoqlgMQZ0o1l7B5v90h0QQo/GMmin1xzyAChmsl8xbOHh5YfWVFGwLzVbYeZ/YJ
 yf3CcgQjAA8UV3f1J3nZeqM84o8qqtKUmUjsqWIgT2DnxOoM3pGckrmQ4OvhLccd
 etROW2nr8EqmoL7shheeHPANoDsTT1XSs0xbWo4ZBpGW5rTIFVoLEGyqa48tw5qA
 pkH1KwpwEXTrw6MXP5L1
 =pgLW
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New core SoC-specific changes.

  New platforms:
   * Introduction of a vendor, Hisilicon, and one of their SoCs with
     some random numerical product name.
   * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m,
     i.e. !MMU).
   * Marvell Berlin series of SoCs, which include the one in Chromecast.
   * MOXA platform support, ARM9-based platform used mostly in
     industrial products
   * Support for Freescale's i.MX50 SoC.

  Other work:
   * Renesas work for new platforms and drivers, and conversion over to
     more multiplatform-friendly device registration schemes.
   * SMP support for Allwinner sunxi platforms.
   * ... plus a bunch of other stuff across various platforms"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits)
  ARM: tegra: fix tegra_powergate_sequence_power_up() inline
  ARM: msm_defconfig: Update for multi-platform
  ARM: msm: Move MSM's DT based hardware to multi-platform support
  ARM: msm: Only build timer.c if required
  ARM: msm: Only build clock.c on proc_comm based platforms
  ARM: ux500: Enable system suspend with WFI support
  ARM: ux500: turn on PRINTK_TIME in u8500_defconfig
  ARM: shmobile: r8a7790: Fix I2C controller names
  ARM: msm: Simplify ARCH_MSM_DT config
  ARM: msm: Add support for MSM8974 SoC
  ARM: sunxi: select ARM_PSCI
  MAINTAINERS: Update Allwinner sunXi maintainer files
  ARM: sunxi: Select RESET_CONTROLLER
  ARM: imx: improve the comment of CCM lpm SW workaround
  ARM: imx: improve status check of clock gate
  ARM: imx: add necessary interface for pfd
  ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
  ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
  ARM: imx: Add cpu frequency scaling support
  ARM i.MX35: Add devicetree support.
  ...
2014-01-23 18:40:49 -08:00
Sachin Kamat
7a255005ee gpio: samsung: Update documentation
hardware.h inclusion is no longer needed. Update the documentation section
related to it and fix a file path.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07 19:00:59 +01:00
Sebastian Hesselbarth
d68185d1ae ARM: add Marvell Berlin SoC familiy to Marvell doc
This adds known facts and rumors about the Marvell Berlin (88DE3xxx) SoC
family to the Marvell SoC documentation.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-12-13 16:31:02 +01:00
Olof Johansson
e086df92e2 Allwinner sunXi SoCs machine additions for 3.13
Nothing outstanding here, mostly some documentation cleanup, and the split of
 the previous generic machine declaration into three different machines to
 handle the sun4i/sun5i, sun6i and sun7i separately.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSYWutAAoJEBx+YmzsjxAgrscQAI8HcLtqaCDRktPOdZwtxl2x
 BWb91mVzOeZsIpbzqZFy6ffZR728+a3Hz5WJkNX7gFwwwh//1YW1pU2icw44Ch5g
 2TfECqjZqfGv3cgpHGn4i7qxXWX+M/fxrFNSEjyRfKNFo6lZS9uNYJI9n7CEelbt
 XQIQ489Oxa9jU0ZGztH4F9S+sj0RVm4IHK32SZLq9UA7+GcC5RvQZ4sDup3gikKH
 lj1OqmCWX+A8KH2u5r7wwWNVjxvXrCuTHIMwL0jGsx1iz27nAsDe+blKMcYgEzPX
 6SluNoTwe5c8U4SU/zwdHpWJCIFPSEaT/PjZ0wIGgSpCg3/6sndtsceeB5uG8szQ
 IBWOfvlsj1Xegz6LsY/IgEqzLn5GnEhuSFGEOoaJP31ZOkd0fWekV87ES4Jicz3+
 wpTukRahrzCj57n1Rnpik+M5Nbb/Ef8b3rrgSat6eUwO1OpZJvF6XOk7l1ByQ1AO
 O3IqdofR8XjwMFzZn0zWyzdUujXwM6MI0PkRJSRNX59AtqrIQHuV6de+JJH6knub
 PLe4ZLpQonqP3BH42mcBjS4JcNub8MfpBl6c3w4AJ3uuH3I0dhGN4LP39O4r2d5H
 0VWFhZlbhRHURyo0dCaeZu5utzK/yUPx/6J8eUD6rsJs1WsAPggDYU66IB3ecGr/
 sS47wxl9t0Yuy9/+X2n6
 =2aio
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-core-for-3.13' of https://github.com/mripard/linux into next/soc

From Maxime Ripard:
Allwinner sunXi SoCs machine additions for 3.13

Nothing outstanding here, mostly some documentation cleanup, and the split of
the previous generic machine declaration into three different machines to
handle the sun4i/sun5i, sun6i and sun7i separately.

* tag 'sunxi-core-for-3.13' of https://github.com/mripard/linux:
  Documentation: dt: Remove clock gates IDs list for Allwinner SoCs
  Documentation: dt: Remove interrupt sources list for Allwinner SoCs
  Documentation: sunxi: Update Allwinner SoC documentation
  Documentation: sunxi: Update A13 user manual dead link
  ARM: sunxi: Order Kconfig options alphabetically
  ARM: sunxi: Simplify restart setup code
  ARM: sunxi: Split out the DT machines for sun6i and sun7i

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-28 10:19:38 -07:00
Maxime Ripard
65788ab227 Documentation: sunxi: Update Allwinner SoC documentation
Since that document was first submitted, some new SoCs have been
announced/released by Allwinner. Update the documentation to mention
those and the related documents.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-10-11 21:24:41 +02:00
Maxime Ripard
ed774fbbee Documentation: sunxi: Update A13 user manual dead link
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-10-11 21:24:39 +02:00
Kevin Hilman
d7f5baeedb Documentation: arm/Marvell: clarify Armada SoCs that match 78xx0 pattern
New users of Marvell SoCs will potentially be confused by the MVEBU
SoCs that match the 78xx0 pattern and thus which defconfig and mach-*
directory to be looking at.  Add a bit of clarification to README for
this.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-08 17:27:59 +00:00
Linus Torvalds
2e515bf096 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "The usual trivial updates all over the tree -- mostly typo fixes and
  documentation updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits)
  doc: Documentation/cputopology.txt fix typo
  treewide: Convert retrun typos to return
  Fix comment typo for init_cma_reserved_pageblock
  Documentation/trace: Correcting and extending tracepoint documentation
  mm/hotplug: fix a typo in Documentation/memory-hotplug.txt
  power: Documentation: Update s2ram link
  doc: fix a typo in Documentation/00-INDEX
  Documentation/printk-formats.txt: No casts needed for u64/s64
  doc: Fix typo "is is" in Documentations
  treewide: Fix printks with 0x%#
  zram: doc fixes
  Documentation/kmemcheck: update kmemcheck documentation
  doc: documentation/hwspinlock.txt fix typo
  PM / Hibernate: add section for resume options
  doc: filesystems : Fix typo in Documentations/filesystems
  scsi/megaraid fixed several typos in comments
  ppc: init_32: Fix error typo "CONFIG_START_KERNEL"
  treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks
  page_isolation: Fix a comment typo in test_pages_isolated()
  doc: fix a typo about irq affinity
  ...
2013-09-06 09:36:28 -07:00
Ard Biesheuvel
2afd0a0524 ARM: 7825/1: document the use of NEON in kernel mode
Add a file to Documentation/arm explaining how kernel mode NEON
is supposed to be used.

Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25 17:09:48 +01:00
Ian Campbell
83d26d1113 ARM: 7824/1: update advice on kernel, initramfs and FDT load address.
- Recommend that the kernel be placed under 128MiB, this is required if
    CONFIG_AUTO_ZRELADDR=y and good (or at least not bad) advice even if
    CONFIG_AUTO_ZRELADDR=n.
  - Recommend that a zImage kernel be placed above 32MiB, this avoids the need
    to relocate prior to decompression, which can speed up boot.
  - Add basic info on the requirements when loading a raw (non-zImage) kernel
    which are stricter than the zImage requirements.
  - Recommend that the DTB be placed after the 128MiB boundary, avoiding any
    potential conflict with the kernel decompressor, and within the lowmem
    region.  In practice it could follow the kernel loaded after 32MiB,
    assuming the kernel decompesses to less than 32MiB, but the 128MiB
    recommendation is simple and unambiguous.
  - Add similar recommendation regarding initramfs.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25 17:09:47 +01:00
Masanari Iida
c9f3f2d8b3 doc: Fix typo in doucmentations
Correct typo (double words) in documentations.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-25 12:34:15 +02:00
Linus Torvalds
80cc38b163 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  treewide: relase -> release
  Documentation/cgroups/memory.txt: fix stat file documentation
  sysctl/net.txt: delete reference to obsolete 2.4.x kernel
  spinlock_api_smp.h: fix preprocessor comments
  treewide: Fix typo in printk
  doc: device tree: clarify stuff in usage-model.txt.
  open firmware: "/aliasas" -> "/aliases"
  md: bcache: Fixed a typo with the word 'arithmetic'
  irq/generic-chip: fix a few kernel-doc entries
  frv: Convert use of typedef ctl_table to struct ctl_table
  sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
  doc: clk: Fix incorrect wording
  Documentation/arm/IXP4xx fix a typo
  Documentation/networking/ieee802154 fix a typo
  Documentation/DocBook/media/v4l fix a typo
  Documentation/video4linux/si476x.txt fix a typo
  Documentation/virtual/kvm/api.txt fix a typo
  Documentation/early-userspace/README fix a typo
  Documentation/video4linux/soc-camera.txt fix a typo
  lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
  ...
2013-07-04 11:40:58 -07:00
Linus Torvalds
42daabf62b ARM SoC late changes
These are changes that arrived a little late before the merge
 window or that have multiple dependencies on previous branches
 so they did not fit into one of the earlier ones. There
 are 10 branches merged here, a total of 39 non-merge commits.
 Contents are a mixed bag for the above reasons:
 
 * Two new SoC platforms: ST microelectronics stixxxx and
   the TI 'Nspire' graphing calculator. These should have
   been in the 'soc' branch but were a little late
 * Support for the Exynos 5420 variant in mach-exynos,
   which is based on the other exynos branches to avoid
   conflicts.
 * Various small changes for sh-mobile, ux500 and davinci
 * Common clk support for MSM
 
 Conflicts:
 * In Kconfig.debug, various additions trivially conflict,
   the list should be kept in alphabetical order when
   resolving.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnl2CrR//JCVInAQIrKhAAwvtsGNe6j9nDuLEitWtQAmhHYZQyUJ8k
 o9j/1j1CqhE8C0bLRud8D4m1GxfxbGeRm2d0HoNbxda3FmntUufqBDi6neMiQiLO
 VltC5rOYL8Mday0Asc3SBfjBj8SZC2bypicKy5zUfzsObCBt343g1WvYffMDNmwH
 FveOQK6q2BKmO67cazc9tk5xmxjVwP/LB8r5mQtiXmMguw0R+ZIDDIP6xaURFkxX
 SAElleD2wtvpVHP1d6AKHpXN99u3xV3uoJjKljECEXdBzW/ZX8m7FG2tKY5xy368
 ta0Nhh2MSRnBhUYOH9uah4PQWYEsbZ+M/W+3J9tKRu6q9D/c/AAxILyXUY2tcHNC
 o1UwcUn1druirx3X1AW8HYAGNwW7BD3HANzIiUkQZG7ByfM4qCtUEo2SAFNIGBoR
 v1FMLhMPgMWotZnKrDQQd0anxkKIOFaSMRVgpQLW2jQt/B7sHLmEH2yDffkbSD76
 PQDThnW/dfm9dgeK+X4fPrveIMKbjQlbFz0okN+LPsUf8e1045HBgCi2A0lTIGWM
 kVVgXHKKXi8G8HBa4VyDlORVHXk1bJEheF+zlDvdk4fHkcf+H/OfvFG2O9TdIdpb
 ITXRyyteaRM4YIZpnJbzeeZDZXT89c2ah7xq36iM+L1ScidyntPquViXeasSc8r6
 pKu9ZDc0Mow=
 =cRu2
 -----END PGP SIGNATURE-----

Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...
2013-07-02 14:42:51 -07:00
Srinivas Kandagatla
15969b4577 ARM: sti: Add STiH416 SOC support
The STiH416 is advanced HD AVC processor with 3D graphics acceleration
and 1.2-GHz ARM Cortex-A9 SMP CPU.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
CC: Stephen Gallimore <stephen.gallimore@st.com>
CC: Stuart Menefy <stuart.menefy@st.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 13:26:58 -07:00
Srinivas Kandagatla
65ebcc1158 ARM: sti: Add STiH415 SOC support
The STiH415 is the next generation of HD, AVC set-top box processors for
satellite, cable, terrestrial and IP-STB markets. It is an ARM Cortex-A9
1.0 GHz, dual-core CPU.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
CC: Stephen Gallimore <stephen.gallimore@st.com>
CC: Stuart Menefy <stuart.menefy@st.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 13:26:47 -07:00
Maxime Ripard
81265dfb1c ARM: sunxi: Add Allwinner A10s machine compatible
The A10s is a SoC member of the Allwinner sun5i family. It is basically
an A13 with an EMAC and an HDMI controller.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-16 20:49:30 +02:00
Stefan Huber
6d1ee2cef6 Documentation/arm/IXP4xx fix a typo
Corrected the word softare to software.

Signed-off-by: Stefan Huber <steffhip@googlemail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-05 16:24:59 +02:00
Maxime Ripard
af65d4592d ARM: sunxi: Update datasheet documentation
We have access to more documentation now, especially the user manuals,
so add the links to them, and do so minor comestic changes while we're
at it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-05-29 09:39:11 +02:00
Linus Torvalds
e3d98847de ARM: platform specific firmware interfaces for 3.10
Two platforms, bcm and exynos have their own firmware interfaces using
 the "secure monitor call", this adds support for those.
 
 We had originally planned to have a third set of patches in here, which
 would extend support for the existing generic "psci" call that is used
 on multiple platforms as well as Xen and KVM guests, but that ended up
 getting dropped because the patches were not ready in time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKXyAAoJEIwa5zzehBx3hVQP/1dOFA/LDDKAV918vutKlCtC
 Rptv8WOjMA/r5vlbTKmUHi3tMDDXdDH6CaWH5Fd4pDAnWqWQ8lCB0lSsOY0sKo7c
 SPujwUV6i5LyF2AM+gqTOUrK/6nZNuDYJL9xVjQTOMMNFnTckI4DsgrWAFsv07hh
 N8kh5iR2fD13tg3c/xmuqQ0JECyot1xZowif3dPi/QywsPlxUAua86XI3rWujN8w
 VSARDdpDj6l/6VHYjqiBaGG3sPvzG/dcsN03lTjI5dah4MNtKU4U4Qy7M83ebRXd
 4+gKqy1T0H+lfAODtZqvnkJdJHhZ73f2dUiZj0eWQg9RxNJoLx/tQKmr9fUp4ypP
 fKv0/z5aFEymAPa0FqUvU+zG57WUBjyOrEUie5XoPq4k+Z0xWHmJ8YeDRaqhBC2j
 YcHuSFAhSimqw8Lrc720qvovLvsy4gU8Y6HVIPek0v/D7svvB6smhry2P3XPjXbM
 nEldmqljONMOXJFfgav5Jp6r41IGJOBzwlPlqmNT7+QYo9BLxPVrnroKVUhvx4da
 gjx0Uo8PJZC8wH2WUiP8v/X6yYk7ZzdYgY0oJseeW8TqT8RxkpIScgwRKeufJW0m
 WHcYoJWrFRPv4iHUNBaFfDLk86NaDVFhjJaUKWGbHLJPG/wGEsT6xoMkl7oI0uH5
 bI8xCHEsSqz8GiRW+j22
 =68m5
 -----END PGP SIGNATURE-----

Merge tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM platform specific firmware interfaces from Olof Johansson:
 "Two platforms, bcm and exynos have their own firmware interfaces using
  the "secure monitor call", this adds support for those.

  We had originally planned to have a third set of patches in here,
  which would extend support for the existing generic "psci" call that
  is used on multiple platforms as well as Xen and KVM guests, but that
  ended up getting dropped because the patches were not ready in time."

* tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm: mark bcm_kona_smc_init as __init
  ARM: bcm281xx: Add DT support for SMC handler
  ARM: bcm281xx: Add L2 cache enable code
  ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
  ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
  ARM: EXYNOS: Add support for Exynos secure firmware
  ARM: EXYNOS: Add support for secure monitor calls
  ARM: Add interface for registering and calling firmware-specific operations
2013-05-04 12:33:36 -07:00
Linus Torvalds
8546dc1d4b Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "The major items included in here are:

   - MCPM, multi-cluster power management, part of the infrastructure
     required for ARMs big.LITTLE support.

   - A rework of the ARM KVM code to allow re-use by ARM64.

   - Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes
     of that stuff for arch/arm

   - Preparatory patches for Cortex-M3 support from Uwe Kleine-König.

  There is also a set of three patches in here from Hugh/Catalin to
  address freeing of inappropriate page tables on LPAE.  You already
  have these from akpm, but they were already part of my tree at the
  time he sent them, so unfortunately they'll end up with duplicate
  commits"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE()
  ARM: IMX: remove unnecessary use of IS_ERR_VALUE()
  ARM: OMAP: use consistent error checking
  ARM: cleanup: OMAP hwmod error checking
  ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels
  ARM: 7700/2: Make cpu_init() notrace
  ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE
  ARM: 7701/1: mm: Allow arch code to control the user page table ceiling
  ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum()
  ARM: mcpm: provide an interface to set the SMP ops at run time
  ARM: mcpm: generic SMP secondary bringup and hotplug support
  ARM: mcpm_head.S: vlock-based first man election
  ARM: mcpm: Add baremetal voting mutexes
  ARM: mcpm: introduce helpers for platform coherency exit/setup
  ARM: mcpm: introduce the CPU/cluster power API
  ARM: multi-cluster PM: secondary kernel entry code
  ARM: cacheflush: add synchronization helpers for mixed cache state accesses
  ARM: cpu hotplug: remove majority of cache flushing from platforms
  ARM: smp: flush L1 cache in cpu_die()
  ARM: tegra: remove tegra specific cpu_disable()
  ...
2013-05-03 09:13:19 -07:00
Dave Martin
9762f12d3e ARM: mcpm: Add baremetal voting mutexes
This patch adds a simple low-level voting mutex implementation
to be used to arbitrate during first man selection when no load/store
exclusive instructions are usable.

For want of a better name, these are called "vlocks".  (I was
tempted to call them ballot locks, but "block" is way too confusing
an abbreviation...)

There is no function to wait for the lock to be released, and no
vlock_lock() function since we don't need these at the moment.
These could straightforwardly be added if vlocks get used for other
purposes.

For architectural correctness even Strongly-Ordered memory accesses
require barriers in order to guarantee that multiple CPUs have a
coherent view of the ordering of memory accesses.  Whether or not
this matters depends on hardware implementation details of the
memory system.  Since the purpose of this code is to provide a clean,
generic locking mechanism with no platform-specific dependencies the
barriers should be present to avoid unpleasant surprises on future
platforms.

Note:

  * When taking the lock, we don't care about implicit background
    memory operations and other signalling which may be pending,
    because those are not part of the critical section anyway.

    A DMB is sufficient to ensure correctly observed ordering if
    the explicit memory accesses in vlock_trylock.

  * No barrier is required after checking the election result,
    because the result is determined by the store to
    VLOCK_OWNER_OFFSET and is already globally observed due to the
    barriers in voting_end.  This means that global agreement on
    the winner is guaranteed, even before the winner is known
    locally.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24 10:37:01 -04:00
Dave Martin
7fe31d28e8 ARM: mcpm: introduce helpers for platform coherency exit/setup
This provides helper methods to coordinate between CPUs coming down
and CPUs going up, as well as documentation on the used algorithms,
so that cluster teardown and setup
operations are not done for a cluster simultaneously.

For use in the power_down() implementation:
  * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu)
  * __mcpm_outbound_enter_critical(unsigned int cluster)
  * __mcpm_outbound_leave_critical(unsigned int cluster)
  * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu)

The power_up_setup() helper should do platform-specific setup in
preparation for turning the CPU on, such as invalidating local caches
or entering coherency.  It must be assembler for now, since it must
run before the MMU can be switched on.  It is passed the affinity level
for which initialization should be performed.

Because the mcpm_sync_struct content is looked-up and modified
with the cache enabled or disabled depending on the code path, it is
crucial to always ensure proper cache maintenance to update main memory
right away.  The sync_cache_*() helpers are used to that end.

Also, in order to prevent a cached writer from interfering with an
adjacent non-cached writer, we ensure each state variable is located to
a separate cache line.

Thanks to Nicolas Pitre and Achin Gupta for the help with this
patch.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24 10:37:00 -04:00
Tomasz Figa
7366b92a77 ARM: Add interface for registering and calling firmware-specific operations
Some boards are running with secure firmware running in TrustZone secure
world, which changes the way some things have to be initialized.

This patch adds an interface for platforms to specify available firmware
operations and call them.

A wrapper macro, call_firmware_op(), checks if the operation is provided
and calls it if so, otherwise returns -ENOSYS to allow fallback to
legacy operation..

By default no operations are provided.

Example of use:

In code using firmware ops:

  __raw_writel(virt_to_phys(exynos4_secondary_startup),
               CPU1_BOOT_REG);

  /* Call Exynos specific smc call */
  if (call_firmware_op(cpu_boot, cpu) == -ENOSYS)
          cpu_boot_legacy(...); /* Try legacy way */

  gic_raise_softirq(cpumask_of(cpu), 1);

In board-/platform-specific code:

  static int platformX_do_idle(void)
  {
          /* tell platformX firmware to enter idle */
          return 0;
  }

  static int platformX_cpu_boot(int i)
  {
          /* tell platformX firmware to boot CPU i */
          return 0;
  }

  static const struct firmware_ops platformX_firmware_ops = {
          .do_idle      = exynos_do_idle,
          .cpu_boot     = exynos_cpu_boot,
          /* other operations not available on platformX */
  };

  static void __init board_init_early(void)
  {
          register_firmware_ops(&platformX_firmware_ops);
  }

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09 01:52:06 +09:00
Emilio López
8eb896ab7a arm: sunxi: Add useful information about sunxi clocks
This patch contains useful bits of information about the sunxi clocks
that may help and/or be interesting for current and future developers.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-27 08:35:34 -07:00
Linus Torvalds
2b8318881d fbdev changes for 3.8:
OMAPDSS changes, including:
 - use dynanic debug prints
 - OMAP platform dependency removals
 - Creation of compat-layer, helping us to improve omapdrm
 - Misc cleanups, aiming to make omadss more in line with the upcoming common
   display framework
 
 Exynos DP changes for the 3.8 merge window:
 - Device Tree support for Samsung Exynos DP
 - SW Link training is cleaned up.
 - HPD interrupt is supported.
 
 Samsung Framebuffer changes for the 3.8 merge window:
 - The bit definitions of header file are updated.
 - Some minor typos are fixed.
 - Some minor bugs of s3c_fb_check_var() are fixed.
 
 FB related changes for SH Mobile, Freescale DIU
 
 Add support for the Solomon SSD1307 OLED Controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyvniAAoJEPo9qoy8lh71IqkQAK9LkVjVk6UQRT2/b39hPF6i
 PKPRNYxpLxX5u98hiqQfweukGkuC/cmsAJOh5UwX1lFg0TNua8CEYg0iuHgUtLWE
 gi+HNUhHfGx1+a9yQpTKsiheq7r88IjpghFGahnFhpE4kDzhIROom7B39x8bx9gs
 1vnCptmcIq0IlMlmjIktTHw8R36Fd/8xDVEhEtDccxT9AJSePnKBY8SBuRjiyJfP
 QvXnd131kmHdshQbSVetsEwI1a9NJ9Z6MMRiQK3vtDiBJ7QHUw8wD/+kdR68gQxZ
 NqTC/s478dvx/bR5CIXHrXxQZGfOCJ0GFzT1rlcRMxECcF0dQYNr3Hid3Zas+mPZ
 hABpEJE7nV7LoDGhW3oIWPt6MZVFED/HE0F5QrG3/PWYs5UpTwkI9UTkB8Bx6LcA
 H9ypHzFaOT1SK2/jln9pAfYgo/ITCRf08gcxBvGZUPcybrQy+kbVPdYgDn09cDhR
 u6ax3k/PMF/6JRdpVRNxLaoEHw/G6vtNjoeRJivZzuIOmGDfGwADGcEnrcZEM3NM
 muOjk8TfTJgK+gzWleOfr9CQGiWWp1Tht9vF6TSApq4SEqmOK81EZpucrMXY0t6r
 9+JmFzS1/+75NeY2YjgHCuqRaqVSMiyyOp1eYV9JIY14rKINbj77OHX8xaMm+Leg
 ZU4tirie/oEALaIJUann
 =KVPX
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux

Pull fbdev changes from Tomi Valkeinen:
 "OMAPDSS changes, including:
   - use dynanic debug prints
   - OMAP platform dependency removals
   - Creation of compat-layer, helping us to improve omapdrm
   - Misc cleanups, aiming to make omadss more in line with the upcoming
     common display framework

  Exynos DP changes for the 3.8 merge window:
   - Device Tree support for Samsung Exynos DP
   - SW Link training is cleaned up.
   - HPD interrupt is supported.

  Samsung Framebuffer changes for the 3.8 merge window:
   - The bit definitions of header file are updated.
   - Some minor typos are fixed.
   - Some minor bugs of s3c_fb_check_var() are fixed.

  FB related changes for SH Mobile, Freescale DIU

  Add support for the Solomon SSD1307 OLED Controller"

* tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits)
  OMAPDSS: fix TV-out issue with DSI PLL
  Revert "OMAPFB: simplify locking"
  OMAPFB: remove silly loop in fb2display()
  OMAPFB: fix error handling in omapfb_find_best_mode()
  OMAPFB: use devm_kzalloc to allocate omapfb2_device
  OMAPDSS: DISPC: remove dispc fck uses
  OMAPDSS: DISPC: get dss clock rate from dss driver
  drivers/video/console/softcursor.c: remove redundant NULL check before kfree()
  drivers/video: add support for the Solomon SSD1307 OLED Controller
  OMAPDSS: use omapdss_compat_init() in other drivers
  OMAPDSS: export dispc functions
  OMAPDSS: export dss_feat functions
  OMAPDSS: export dss_mgr_ops functions
  OMAPDSS: separate compat files in the Makefile
  OMAPDSS: move display sysfs init to compat layer
  OMAPDSS: DPI: use dispc's check_timings
  OMAPDSS: DISPC: add dispc_ovl_check()
  OMAPDSS: move irq handling to dispc-compat
  OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
  OMAPDSS: move blocking mgr enable/disable to compat layer
  ...

Conflicts:
	arch/arm/mach-davinci/devices-da8xx.c
	arch/arm/plat-omap/common.c
	drivers/media/platform/omap/omap_vout.c
2012-12-15 13:03:48 -08:00
Maxime Ripard
3b52634f0b ARM: sunxi: Add basic support for Allwinner A1x SoCs
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Stefan Roese <sr@denx.de>
2012-11-16 21:56:51 +01:00
Tomi Valkeinen
0049fb2603 OMAPFB: use dma_alloc_attrs to allocate memory
Use dma_alloc_attrs to allocate memory instead of omap specific vram
allocator. After this we can remove the omap vram allocator.

There are some downsides to this change:

1) dma_alloc_attrs doesn't let us allocate at certain physical address.
However, this should not be a problem as this feature of vram allocator
is only used when reserving the framebuffer that was initialized by the
bootloader, and we don't currently support "passing" a framebuffer from
the bootloader to the kernel anyway.

2) dma_alloc_attrs, as of now, always ioremaps the allocated area, and
we don't need the ioremap when using VRFB. This patch uses
DMA_ATTR_NO_KERNEL_MAPPING for the allocation, but the flag is currently
not operational.

3) OMAPFB_GET_VRAM_INFO ioctl cannot return real values anymore. I
changed the ioctl to return 64M for all the values, which, I hope, the
applications will interpret as "there's enough vram".

4) "vram" kernel parameter to define how much ram to reserve for video
use no longer works. The user needs to enable CMA and use "cma"
parameter.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-13 09:52:24 +02:00
Russell King
a0f0dd57f4 Merge branch 'fixes' into for-linus
Conflicts:
	arch/arm/kernel/smp.c
2012-10-11 10:55:04 +01:00
Linus Torvalds
b9541d94bc ARM: soc: documentation updates
Documentation update for Marvell SoCs, the secret decoder ring to all
 their crazy product names and numbers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO66AAoJEIwa5zzehBx3ooEP/RPzMhZ8ogbmARYoEaTHB9zH
 IldnKxOLmYYJeKQiAlmhVrNgR5ec9cpgJtHtpJ6MCU7Zuj6WAmaAz+6y+CfUD2PV
 YQnxtrbMZvKCpS93prdyoawgtUebL4cgM8OZByBQZSdKn4AQfJpgLqkYAMjnwaBt
 FjrgFGN6qSUWGvOk/a3D90N3SZ24TPrA8P11BCDFI+NZSo+tdZ01tLFDMwOyY3Nx
 exAi4Bh44b2Hdg01/uBVl5bEikaRpJyXujnMJTvg0gH6fztzJdRB6ITLx7WUjVC2
 q/cTPoh7WXeKPdAttTKn1dCIcWeHTIxH85Xcs+DHFlekhOorjcrTbBSo1qbbqf8F
 1NGFgVKMENFqT8iGP5IlUlGUP5TujFiFSmqiaJioIeorMzFQEkhMco1mJXkfSOYh
 PY4g3A4KpMIZV70cD1lKmNou/xTIwVsEx2M7iYGLOmZI4Z+MhnxlIFVzOLHTbYid
 Km1vJKJFX1tV9IcGg9gXdfzq/mdmeNXY1Fmw0D4CoEgWv7qc5ETAuOW2T8rOtYbK
 MBPy3/5haHrpsLEHEy+N8TLO/WJgjAuMIxSSkg/6dtRSx/yWWRz1hBRtxXH0DDWf
 Fs0xYe6i7UemzpAB/6z2kBDUyFI2fnaoTHmjIQiFYigIhQDZ9nCtwCJrJNDRb+av
 wkxFShtrp7aw4EKQlA9H
 =3vva
 -----END PGP SIGNATURE-----

Merge tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc documentation updates from Olof Johansson:
 "Documentation update for Marvell SoCs, the secret decoder ring to all
  their crazy product names and numbers."

* tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: add documentation describing Marvell families of SoC
2012-10-01 18:56:31 -07:00
Olof Johansson
928487a1ce Merge branch 'samsung/cleanup' into next/cleanup
From Kukjin Kim:

Here, there are cleanup patches for Samsung v3.7 and most of them are
related to cleanup Samsung specific gpio API.

* samsung/cleanup:
  gpio: samsung: Update documentation
  ARM: S3C24XX: Use module_platform_driver macro in mach-osiris-dvs.c
  ARM: S3C24XX: Use module_platform_driver macro in h1940-bluetooth.c
  gpio-samsung: Remove now unused s3c2410_gpio* API
  ARM: S3C24XX: Remove obsolete GPIO API declarations
  ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API
  ARM: EXYNOS: cleanup unused code related to GPS
2012-09-20 16:35:21 -07:00
Dave Martin
6a6d55c38c ARM: virt: Update documentation for hyp mode entry support
Document the possibility of the kernel being entered in HYP mode.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-09-19 08:32:51 +01:00
Sylwester Nawrocki
98025c8c75 gpio: samsung: Update documentation
Update Samsung GPIO API documentation to reflect removal of
the s3c24xx specific gpio API. While at it, fix some typos.

The notes on conversion from s3c2410_* functions to the gpiolib
API are left here just in case there is any out of tree code that
still needs to be converted.

Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-07 06:40:29 +09:00
Arnd Bergmann
19ec6caca2 Merge branch 'cleanup/io-pci' into next/cleanups
From Rob Herring <robherring2@gmail.com>:

This is the 2nd part of mach/io.h removals. This series removes io.h on
platforms with PCI by creating a fixed virtual I/O mapping and a common
__io() macro.

This version has changed a bit to accommodate Tegra converting its PCIe
host to a platform driver. Now the virtual space is only reserved during
early boot before .map_io() is called. The mapping is not created until
calling pci_ioremap_io which can be done at any point after vmalloc is
initialized.

I've gone back to fixed 64K windows for each PCI bus. This allows
removing all the i/o resource setup from the individually platforms and
placing it within the common ARM PCI code.

I've only tested versatilepb under qemu (with the model hacked up to
actually enable i/o space), so any testing is appreciated. iop3xx and
mv78xx0 have some risk of breaking as the PCI bus addresses are moved
to 0 from matching the cpu host bus addesss.

* cleanup/io-pci:
  ARM: iop3xx: use fixed PCI i/o mapping
  ARM: mv78xx0: use fixed pci i/o mapping
  ARM: iop13xx: use fixed PCI i/o mapping
  iop13xx: use more regular PCI I/O space handling
  ARM: orion5x: use fixed PCI i/o mapping
  ARM: kirkwood: use fixed PCI i/o mapping
  ARM: dove: use fixed PCI i/o mapping
  ARM: footbridge: use fixed PCI i/o mapping
  ARM: shark: use fixed PCI i/o mapping
  ARM: integrator: remove trailing whitespace on pci_v3.c
  ARM: integrator: use fixed PCI i/o mapping
  ARM: tegra: use fixed PCI i/o mapping
  ARM: versatile: use fixed PCI i/o mapping
  ARM: move PCI i/o resource setup into common code
  ARM: Add fixed PCI i/o mapping
  i2c: iop3xx: use standard gpiolib functions
  i2c: iop3xx: clean-up trailing whitespace

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-13 16:56:29 +02:00
Thomas Petazzoni
9ee99783d7 arm: add documentation describing Marvell families of SoC
As stated in the introduction of the document, the families of ARM
SoCs at Marvell are very complicated, and it is difficult for
newcomers to understand the organization of this SoC family and how it
relates to the Linux kernel support for those hardware platforms.

This document is only at RFC stage for now, it requires reviews and
comments from the Marvell maintainers, the PXA maintainers and the MMP
maintainers. For correctness of course, but also to add any other
information that would be useful. For example, one of the thing that
wasn't clear how to detail in the documentation is how the SoCs relate
to each other in terms of hardware IP blocks. For example, most of the
Kirkwood/Dove/Armada 370-XP/etc. hardware IPs (I2C, SPI, USB, SATA,
etc.) are identical, while the PXA and MMP families are completely
separate.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Maen Suleiman <maen@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Shadi Ammouri <shadi@marvell.com>
Cc: Eran Ben-Avi <benavi@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

---
Changes from v3:
 * Add Arnd Bergmann Acked-by.

Changes from v2:
 * Mention the plat-<foo> directory that each SoC family is using.
 * Take into account Eric Miao's comments on the PXA/MMP families: add
   PXA21x/PXA25x/PXA26x to the list, mention which processors are
   AP+CP or AP only. Clarify the comments on which SoCs were designed
   by Intel, which ones were designed by Marvell after the acquisition
   of the XScale family.
 * Mention long-term plans regarding the support of those SoC
   families.

Changes from v1:
 * Added publicly available datasheet for the 88F5182 pointed by
   Andrew Lunn.
 * Added publicly available datasheet for the 88F5281 found with
   Google searches
 * Mentionned the Feroceon core name where appropriate, and Sheeva
   where appropriate
 * Fixed the core names for PXA930, PXA935 and PXA955 after comments
   from Arnd Bergmann. Wikipedia is mistakenly suggesting that PXA93x
   are Sheeva-based, and there isn't much information available on the
   web about the 955.
2012-08-11 08:52:32 +02:00
Rob Herring
c279443709 ARM: Add fixed PCI i/o mapping
This adds a fixed virtual mapping for PCI i/o addresses. The mapping is
located at the last 2MB of vmalloc region (0xfee00000-0xff000000). 2MB
is used to align with PMD size, but IO_SPACE_LIMIT is 1MB. The space
is reserved after .map_io and can be mapped at any time later with
pci_ioremap_io. Platforms which need early i/o mapping (e.g. for vga
console) can call pci_map_io_early in their .map_io function.

This has changed completely from the 1st implementation which only
supported creating the static mapping at .map_io.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@linaro.org>
2012-07-25 09:26:42 -05:00
Linus Torvalds
d14b7a419a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Trivial updates all over the place as usual."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits)
  Fix typo in include/linux/clk.h .
  pci: hotplug: Fix typo in pci
  iommu: Fix typo in iommu
  video: Fix typo in drivers/video
  Documentation: Add newline at end-of-file to files lacking one
  arm,unicore32: Remove obsolete "select MISC_DEVICES"
  module.c: spelling s/postition/position/g
  cpufreq: Fix typo in cpufreq driver
  trivial: typo in comment in mksysmap
  mach-omap2: Fix typo in debug message and comment
  scsi: aha152x: Fix sparse warning and make printing pointer address more portable.
  Change email address for Steve Glendinning
  Btrfs: fix typo in convert_extent_bit
  via: Remove bogus if check
  netprio_cgroup.c: fix comment typo
  backlight: fix memory leak on obscure error path
  Documentation: asus-laptop.txt references an obsolete Kconfig item
  Documentation: ManagementStyle: fixed typo
  mm/vmscan: cleanup comment error in balance_pgdat
  mm: cleanup on the comments of zone_reclaim_stat
  ...
2012-07-24 13:34:56 -07:00
Jesper Juhl
f9028317b2 Documentation: Add newline at end-of-file to files lacking one
This patch simply adds a newline character at end-of-file to those
files in Documentation/ that currently lack one.

This is done for a few different reasons:

A) It's rather annoying when you do "cat some_file.txt" that your
   prompt/cursor ends up at the end of the last line of output rather
   than on a new line.

B) Some tools that process files line-by-line may get confused by the
   lack of a newline on the last line.

C) The "\ No newline at end of file" line in diffs annoys me for some
   reason.

So, let's just add the missing newline once and for all.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-20 23:10:28 +02:00
Viresh Kumar
10d8935f46 Viresh has moved
viresh.kumar@st.com email-id doesn't exist anymore as I have left the
company.  Replace ST's id with viresh.linux@gmail.com.

It also updates .mailmap file to fix address for 'git shortlog'

Signed-off-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20 14:39:36 -07:00
Linus Torvalds
804ce9866d fbdev updates for 3.5
It includes:
 - driver for AUO-K1900 and AUO-K1901 epaper controller
 - large updates for OMAP (e.g. decouple HDMI audio and video)
 - some updates for Exynos and SH Mobile
 - various other small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPyAhmAAoJECSVL5KnPj1PBcoQAIWftuoXo3sk94f5jKcV4Ucx
 MthEc5iEpMVs8xaEruHHNHXWv8ic0x/PfdC2xrpKOEbNXQcNPlb/QE2xWmBRxmT1
 ucDyu10HJ36jKcwcK4ra5IQwOW+GtbTBEoBZT+WNAjxHZtJmxzjQGM4C12zVQpdJ
 +qV2RP93JmsJoVBL9aKVAg1Ko135LLfD8TcKd+z8TmgFnLfSwKhfl7Jtd2xXwyvz
 /hmW3kJUEnD8E5wuj+/g8sKJhQkGalEiITTqG2j2vJyFgxHSqyLSw8BBixrFW1uT
 B9VnZsHF35ccCo+96UZRH4QsGJTx08+rea/qsv8IMSGczyRp5ey1ufjL+CzKiiIN
 FWfex6fY0HHqZGAopQhjag54e914SIbSxdBwWS/iRrtVt3e9d03BzkhYs4rXl4Ey
 CTC5obzWNTbQ6hLEjgWfVKkKcrF56BnRn3zGPgCTKGp2NK3vODdBkt/EmzUFvCWR
 CcyQhh+PvZzEWp3XsdOGossYs/0aP4bO+7XPGJxZaa3+WVcRaZwAG/uZvJXXBfnp
 DGRFy4wPsTTwKYIx4+t/KrsLtNVKioSMS5GEtuM1YEb8pA7mkUIkqwJv1I261h58
 heTr6vWUsviUqHlKALJ+1CdwWGr3CtktCZssGsSUri61nm8CvlSRn2Nr2aJ/L3RN
 AkemC/33RE5X/+lfkdMx
 =tmIU
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6

Pull fbdev updates from Florian Tobias Schandinat:
 - driver for AUO-K1900 and AUO-K1901 epaper controller
 - large updates for OMAP (e.g. decouple HDMI audio and video)
 - some updates for Exynos and SH Mobile
 - various other small fixes and cleanups

* tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits)
  video: bfin_adv7393fb: Fix cleanup code
  video: exynos_dp: reduce delay time when configuring video setting
  video: exynos_dp: move sw reset prioir to enabling sw defined function
  video: exynos_dp: use devm_ functions
  fb: handle NULL pointers in framebuffer release
  OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request
  OMAPDSS: Apply VENC timings even if panel is disabled
  OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC
  OMAPDSS: DISPC: Support rotation through TILER
  OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n
  OMAPFB: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv
  OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays
  OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods
  OMAPDSS: DISPC: Update Accumulator configuration for chroma plane
  drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers
  video: exynos mipi dsi: support reverse panel type
  video: exynos mipi dsi: Properly interpret the interrupt source flags
  video: exynos mipi dsi: Avoid races in probe()
  ...
2012-06-01 16:57:51 -07:00
Linus Torvalds
30b842889e arm-soc: soc specific changes, part 2
This adds support for the spear13xx platform, which has first been under
 review a long time ago and finally been completed after generic spear
 work has gone into the clock, dt and pinctrl branches.
 
 Also a number of updates for the samsung socs are part of this branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuezDAAoJEIwa5zzehBx3mooP/iTHd1wRjr2MzKNx4+LpLWgl
 aAXH002xe9Lvu7m75BRvEYWWdRLkyEy9ARM4s2wJCnxU41KmbF65ED1erxK8xaSe
 Ako34vzH+HiUCM2DLzIP6FXyJMM7OcfrdGaY/GxOv+U+MzGUHeu3Q+8b0B/yfBnm
 M3HdDrpyZHKZP9UM3wVQ4/ilDck6vEjYSV2jC11IaHiDMRD2nSpfRKh8H3+gv65S
 gtj9EZpWM8CZg/fCe5lsm3PZnBnqHHW3WVafVnDQfGWeJYqZxMB5QKLU6qf/ntpx
 LU2WjXoGaMmGBVZWynrwNEY6GVp3fZrDV30/q8Htf0/fBpEjUncrLHXtw0DxkpnK
 UuyoRgn7zxOc3kDzohFNIexp1K3q+PNzXklR9hg7OSVji+9bPd2LIOEnpBeghBGj
 WzZIebz5dIdddHlnOl4fRdmxZva2UTuI4bFAJ0izi10Mup7A9lrENnFHG/iVA0rQ
 QlqJZoyeDCvbXQqZCgHirYRPhIxXdQj4G5IivfRxQ7Jgjy76Kt9uDp1egwezF/3a
 2jVtcK42XokVv3Dhsvq9UNFn9GWdVImZ7eh70XLv+q834zAVxSzjWLtlS8I1Q5WO
 7BGIJaICtugNwgYr44Dif6nsoVUmMnSwU5hVw1pApKZspN6EhMhMdp2hw8JPHFUs
 mrZdHi1NAWuYSbObc3UB
 =W2Ri
 -----END PGP SIGNATURE-----

Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997d6 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c983 ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...
2012-05-26 13:05:55 -07:00
Linus Torvalds
b324c67d48 arm-soc: device tree conversions, part 1
The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game of
 booting using device trees, which is a great step forward for them. at91
 and spear have pretty much completed this process with a huge amount of
 work being put into at91. The other platforms are continuing the process.
 
 We finally start to see the payback on this investment, as new machines
 are getting supported purely by adding a .dts source file that can be
 completely independent of the kernel source.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPueqRAAoJEIwa5zzehBx3AYkP/ibDGGd0qp1gxnxPYowliXcp
 lrWP8KB2PVcX/041jwpvsWeHzWT+Gm39ryBfz2L3pq/RiuU0jPPwChKgy1iglE8X
 6Rq6sPWkXoDRtyeCuoiaxf1AYuzzAVdzZ0HlPO93tSKgo5eeyZRC5OeebAnrLDCE
 SDi8gZx2mm9+j2Dz46gq8QluyswMMbke3fHHHaHUlcP9fKIvFWvEfsn5j+YQ9bSw
 DrSIqGOzv6Emn7F6yhFQqxmk86KLnaXDVpAWgjVDhzaPv0rcTzloN6D2Ie2e5Vev
 BiRM1zvWn2d9kDk7gpm0t67nguYxsCBl1GNCP1brrncGwt15S10JimYlRhYW+B7u
 qgJqMPko3OnONvyl6e8qgIa2M5N4K/mo1i/jfOwFw3+KfUjXqLeio53Ysr4a6tsM
 Ev3bEsofNJKA0dlMcVzr7ntL087B6Y8mY3oJsVZji5M0KVfx1Jfn+X1W+l/2KD1H
 XWhJrCGa1HlbtSnrD+E91VHGC3M4sEXbbTljMAjHImlU9dGXmmbRMNsqNwkF6qFj
 EO2HnFvdN1oK+zEmeAttR1JHxfMdPFnTfmpUf3AiVSjGO//Wltelqx8ibA2Smn7S
 xXmzqX/HMhIOYCh81FdvzsK4qRYU5QyOsEJB4G0UjBZ66M1A3T/+vPpWuKsw5bUb
 qbnxaaXNsaZjWbbSSrZ4
 =7DYv
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull device tree conversions for arm-soc, part 1, from Olof Johansson:
 "The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game
  of booting using device trees, which is a great step forward for them.
  at91 and spear have pretty much completed this process with a huge
  amount of work being put into at91.  The other platforms are
  continuing the process.

  We finally start to see the payback on this investment, as new
  machines are getting supported purely by adding a .dts source file
  that can be completely independent of the kernel source."

Fix up trivial conflict in arch/arm/Kconfig

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files
  arm/dts: omap4-panda: Add LEDs support
  arm/dts: omap4-sdp: Add LEDs support
  arm/dts: twl4030: Add twl4030-gpio node
  OMAP4: devices: Do not create mcpdm device if the dtb has been provided
  OMAP4: devices: Do not create dmic device if the dtb has been provided
  Documentation: update docs for mmp dt
  ARM: dts: refresh dts file for arch mmp
  ARM: mmp: support pxa910 with device tree
  ARM: mmp: support mmp2 with device tree
  gpio: pxa: parse gpio from DTS file
  ARM: mmp: support DT in timer
  ARM: mmp: support DT in irq
  ARM: mmp: append CONFIG_MACH_MMP2_DT
  ARM: mmp: fix build issue on mmp with device tree
  ARM: ux500: Enable PRCMU Timer 4 (clocksource) for Device Tree
  ARM: ux500: Disable SMSC911x platform code registration when DT is enabled
  ARM: ux500: Fork cpu-db8500 platform_devs for sequential DT enablement
  ARM: ux500: Do not attempt to register non-existent i2c devices on Snowball
  ARM: SPEAr3xx: Correct keyboard data passed from DT
  ...
2012-05-22 09:30:52 -07:00
Viresh Kumar
71e09a9e7d SPEAr: Update MAINTAINERS and Documentation
This patchset updates MAINTAINERS files, makes shiraz as second Maintainer for
SPEAr SoCs.

It also updates Documentation mostly for SPEAr13xx.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-05-14 17:34:11 +02:00
Ricardo Neri
9c0b842036 OMAPDSS: Provide an interface for audio support
There exist several display technologies and standards that support audio as
well. Hence, it is relevant to update the DSS device driver to provide an audio
interface that may be used by an audio driver or any other driver interested in
the functionality.

The audio_enable function is intended to prepare the relevant
IP for playback (e.g., enabling an audio FIFO, taking in/out of reset
some IP, enabling companion chips, etc). It is intended to be called before
audio_start. The audio_disable function performs the reverse operation and is
intended to be called after audio_stop.

While a given DSS device driver may support audio, it is possible that for
certain configurations audio is not supported (e.g., an HDMI display using a
VESA video timing). The audio_supported function is intended to query whether
the current configuration of the display supports audio.

The audio_config function is intended to configure all the relevant audio
parameters of the display. In order to make the function independent of any
specific DSS device driver, a struct omap_dss_audio is defined. Its purpose
is to contain all the required parameters for audio configuration. At the
moment, such structure contains pointers to IEC-60958 channel status word and
CEA-861 audio infoframe structures. This should be enough to support HDMI and
DisplayPort, as both are based on CEA-861 and IEC-60958. The omap_dss_audio
structure may be extended in the future if required.

The audio_enable/disable, audio_config and audio_supported functions could be
implemented as functions that may sleep. Hence, they should not be called
while holding a spinlock or a readlock.

The audio_start/audio_stop function is intended to effectively start/stop audio
playback after the configuration has taken place. These functions are designed
to be used in an atomic context. Hence, audio_start should return quickly and be
called only after all the needed resources for audio playback (audio FIFOs,
DMA channels, companion chips, etc) have been enabled to begin data transfers.
audio_stop is designed to only stop the audio transfers. The resources used
for playback are released using audio_disable.

A new enum omap_dss_audio_state is introduced to help the implementations of
the interface to keep track of the audio state. The initial state is _DISABLED;
then, the state transitions to _CONFIGURED, and then, when it is ready to
play audio, to _ENABLED. The state _PLAYING is used when the audio is being
rendered.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:13:50 +03:00
Grazvydas Ignotas
0aca3c63e0 OMAPDSS: VENC: allow switching venc output type at runtime
VENC output type (composite/svideo) doesn't have to be fixed by board
wiring, it is possible to also provide composite signal through svideo
luminance connector (software enabled), which is what pandora does.

Having to recompile the kernel for users who have TV connector types
that don't match default board setting is very inconvenient, especially
for users of a consumer device, so add support for switching VENC output
type at runtime over a new sysfs file output_type.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 14:44:13 +03:00
Viresh Kumar
c5fa4fdcdb ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture
This patch adds a generic target for SPEAr3xx machines that can be configured
via the device-tree. Currently the following devices are supported via the
devicetree:

- VIC interrupts
- PL011 UART
- PL061 GPIO
- PL110 CLCD
- SP805 WDT
- Synopsys DW I2C
- Synopsys DW ethernet
- ST FSMC-NAND
- ST SPEAR-SMI
- ST SPEAR-KEYBOARD
- ST SPEAR-RTC
- ARASAN SDHCI-SPEAR
- SPEAR-EHCI
- SPEAR-OHCI

Other peripheral devices will follow in later patches.

This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of
4K for individual peripherals. This is done to have efficient TLB lookup for any
I/O windows that are located closely together. ioremap() on this range will
return this mapping only instead of creating another.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-22 22:41:35 +02:00
Rob Herring
c65f2abf54 ARM: remove ixp23xx and ixp2000 platforms
ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:

13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it

Removing will help simplify ARM consolidation in general and PCI re-work
specifically.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2012-04-06 08:26:18 -05:00
Masanari Iida
40e47125e6 Documentation: Fix multiple typo in Documentation
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-07 16:08:24 +01:00
Nicolas Pitre
0536bdf33f ARM: move iotable mappings within the vmalloc region
In order to remove the build time variation between different SOCs with
regards to VMALLOC_END, the iotable mappings are now allocated inside
the vmalloc region.  This allows for VMALLOC_END to be identical across
all machines.

The value for VMALLOC_END is now set to 0xff000000 which is right where
the consistent DMA area starts.

To accommodate all static mappings on machines with possible highmem usage,
the default vmalloc area size is changed to 240 MB so that VMALLOC_START
is no higher than 0xf0000000 by default.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Jamie Iles <jamie@jamieiles.com>
2011-11-26 19:21:26 -05:00
Linus Torvalds
4b478cedcd Merge branch 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
  ARM: mach-loki: delete
  ARM: mach-s3c2400: delete
  ARM: mach-s3c24a0: delete
2011-07-25 12:43:28 -07:00
Russell King
3ad55155b2 Merge branch 'devel-stable' into for-next
Conflicts:
	arch/arm/kernel/entry-armv.S
2011-07-22 23:09:07 +01:00
Dave Martin
540b573875 ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state
Currently, the documented kernel entry requirements are not
explicit about whether the kernel should be entered in ARM or
Thumb, leading to an ambiguitity about how to enter Thumb-2
kernels.  As a result, the kernel is reliant on the zImage
decompressor to enter the kernel proper in the correct instruction
set state.

This patch changes the boot entry protocol for head.S and Image to
be the same as for zImage: in all cases, the kernel is now entered
in ARM.

Documentation/arm/Booting is updated to reflect this new policy.

A different rule will be needed for Cortex-M class CPUs as and when
support for those lands in mainline, since these CPUs don't support
the ARM instruction set at all: a note is added to the effect that
the kernel must be entered in Thumb on such systems.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19 12:00:53 +01:00
Nicolas Pitre
632b7cf6c0 ARM: mach-s3c2400: delete
On Tue, 28 Jun 2011, Ben Dooks wrote:

> On Tue, Jun 28, 2011 at 11:22:57PM +0200, Arnd Bergmann wrote:
>
> > On a related note, what about mach-s3c2400? It seems to be even more
> > incomplete.
>
> Probably the same fate awaits that. It is so old that there's little
> incentive to do anything with it.

So out it goes as well.

The PORT_S3C2400 definition in include/linux/serial_core.h is left there
to prevent a reuse of the same number for another port type.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-18 10:59:26 -04:00
Simon Horman
090ab3ff8e ARM: 6886/1: mmc, Add zboot from eSD support for SuperH Mobile ARM
This allows a ROM-able zImage to be written to eSD and for SuperH Mobile
ARM to boot directly from the SDHI hardware block.

This is achieved by the MaskROM loading the first portion of the image into
MERAM and then jumping to it.  This portion contains loader code which
copies the entire image to SDRAM and jumps to it. From there the zImage
boot code proceeds as normal, uncompressing the image into its final
location and then jumping to it.

Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-29 10:00:52 +01:00
Nicolas Pitre
40fb79c8a8 ARM: add a kuser_cmpxchg64 user space helper
Some user space applications are designed around the ability to perform
atomic operations on 64 bit values.  Since this is natively possible
only with ARMv6k and above, let's provide a new kuser helper to perform
the operation with kernel supervision on pre ARMv6k hardware.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Dave Martin <dave.martin@linaro.org>
2011-06-28 15:47:47 -04:00
Nicolas Pitre
37b8304642 ARM: kuser: move interface documentation out of the source code
Digging into some assembly file in order to get information about the
kuser helpers is not that convivial.  Let's move that information to
a better formatted file in Documentation/arm/ and improve on it a bit.

Thanks to Dave Martin <dave.martin@linaro.org> for the initial cleanup and
clarifications.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Dave Martin <dave.martin@linaro.org>
2011-06-20 10:49:24 -04:00
Russell King
586893ebc4 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-exynos4/mach-nuri.c
2011-05-25 21:47:48 +01:00
Grant Likely
ede338f4ce dt: add documentation of ARM dt boot interface
v6: typo fixes
v5: clarified that dtb should be aligned on a 64 bit boundary in RAM.
v3: added details to Documentation/arm/Booting

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-23 09:30:20 -06:00
Kukjin Kim
a73ddc61e8 ARM: S5P6442: Removing ARCH_S5P6442
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-12 08:10:53 +09:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds
63a93699c6 Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6629/2: aaec2000: remove support for mach-aaec2000
  ARM: lh7a40x: remove unmaintained platform support

Fix up trivial conflicts in
 - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed)
 - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)
2011-03-16 19:05:40 -07:00
Simon Horman
f45b114991 ARM: 6617/1: mmc, Add zboot from MMC support for SuperH Mobile ARM
This allows a ROM-able zImage to be written to MMC and
for SuperH Mobile ARM to boot directly from the MMCIF
hardware block.

This is achieved by the MaskROM loading the first portion
of the image into MERAM and then jumping to it. This portion
contains loader code which copies the entire image to SDRAM
and jumps to it. From there the zImage boot code proceeds
as normal, uncompressing the image into its final location
and then jumping to it.

Cc: Magnus Damm <magnus.damm@gmail.com>

Russell, please consider merging this for 2.6.38.

This patch depends on:
* "mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h"
  which will be merged though Paul Mundt's rmobile sh-2.6.
  The absence of this patch will break the build if
  the (new) CONFIG_ZBOOT_ROM_MMCIF option is set.
  There are no subtle side-effects.

v2:
Addressed comments by Magnus Damm
* Fix copyright in vrl4.c
* Fix use of #define CONFIG_ZBOOT_ROM_MMCIF in mmcif-sh7372.c
* Initialise LED GPIO lines in head-ap4evb.txt instead of mmcif-sh7372.c
  as this is considered board-specific.

v3:
Addressed comments made in person by Magnus Damm
* Move mmcif_loader to be earlier in the image and
  reduce the number of blocks of boot program loaded by the MaskRom
  from 40 to 8 accordingly.
* Move LED GPIO initialisation into mmcif_progress_init
  - This leaves the partner jet script unbloated
Other
* inline mmcif_update_progress so it is a static inline in a header file

v4:
* Use htole16() and htole32() in v4rl.c to ensure
  that the output is little endian

v5:
Addressed comments by Russell King
* Simplify assembly code
* Jump to code rather than an address <- bug fix
* Use (void __iomem *) as appropriate
Roll in mackerel support
* This was previously a separate patch, only because of the order
  in which this code was developed
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-25 15:06:52 +00:00
Russell King
82e6923e18 ARM: lh7a40x: remove unmaintained platform support
lh7a40x has only been receiving updates for updates to generic code.
The last involvement from the maintainer according to the git logs was
in 2006.  As such, it is a maintainence burden with no benefit.

This gets rid of two defconfigs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-24 19:05:19 +00:00
Linus Torvalds
01539ba2a7 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig
2011-01-06 19:13:58 -08:00
Russell King
4ec3eb1363 Merge branch 'smp' into misc
Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/mm/ioremap.c
2011-01-06 22:32:03 +00:00
Nishanth Menon
fd1478cd61 omap: opp: add OMAP3 OPP table data and common init
Add OPP data for OMAP34xx and OMAP36xx and initialization functions
to populate OPP tables based on current SoC.
introduce an OMAP generic opp initialization routine which OMAP3
and OMAP4+ SoCs can use to register their OPP definitions.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 14:30:40 -08:00
Tomi Valkeinen
0bf3d5a0fb OMAP: DSS: Fix documentation regarding 'vram' kernel parameter
The DSS documentation didn't mention the option to give the VRAM start
address.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10 20:51:14 +09:00
Leif Lindholm
64d2dc384e ARM: 6396/1: Add SWP/SWPB emulation for ARMv7 processors
The SWP instruction was deprecated in the ARMv6 architecture,
superseded by the LDREX/STREX family of instructions for
load-linked/store-conditional operations. The ARMv7 multiprocessing
extensions mandate that SWP/SWPB instructions are treated as undefined
from reset, with the ability to enable them through the System Control
Register SW bit.

This patch adds the alternative solution to emulate the SWP and SWPB
instructions using LDREX/STREX sequences, and log statistics to
/proc/cpu/swp_emulation. To correctly deal with copy-on-write, it also
modifies cpu_v7_set_pte_ext to change the mappings to priviliged RO when
user RO.

Signed-off-by: Leif Lindholm <leif.lindholm@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-04 15:45:24 +00:00
Linus Torvalds
229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Gregory Bean
70816e2ca5 msm: documentation: add gpiomux documentation.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:16 -07:00
Stefan Weil
429d646d9a Doc: Fix spelling
Legned -> Legend
mainatined -> maintained

Legend is now Lenovo, so more fixes (text and url)
would be possible, too.

Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-10 14:22:39 +02:00
Justin P. Mattock
0ea6e61122 Documentation: update broken web addresses.
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-04 15:21:40 +02:00
Linus Walleij
1dbd30e989 ARM: 6225/1: make TCM allocation static and common for all archs
This changes the TCM handling so that a fixed area is reserved at
0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but
XScale does not have TCM so the mechanisms are mutually exclusive.

This change is needed to make TCM detection more dynamic while
still being able to compile code into it, and is a must for the
unified ARM goals: the current TCM allocation at different places
in memory for each machine would be a nightmare if you want to
compile a single image for more than one machine with TCM so it
has to be nailed down in one place.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:42:38 +01:00
Ben Dooks
d192baeaa7 ARM: SAMSUNG: Documentation: add documentation on GPIO code
Add some documentation in Documentation/arm/Samsung for the GPIO code
and where to look for the necessary functions. Update the S3C24XX case
as well.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:31:31 +09:00
Ben Dooks
0639b93d00 ARM: S3C24XX: Documentation: add section on gpiolib changes
Add section to the S3C24XX GPIO documentation on the recent changes
to move towards gpiolib integration.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:31:31 +09:00
Ben Dooks
70f5c9a4dd ARM: S3C24XX: Documentation: update GPIO documentation
Upate the S3C24XX GPIO documentation after the changes for gpiolib
and show which calls are being replaced by gpiolib or the new s3c
generic calls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:31:30 +09:00
Ben Dooks
b9f141acf2 ARM: S3C24XX: Documentation: update documentation overview
Add the two new SoCs added in this release cycle and update the notes
on the gpiolib conversion.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:31:30 +09:00
Ben Dooks
1b03ef462b ARM: SAMSUNG: Documentation: update directory layout
Update the directory layout in Documentation/arm/Samsung/Overview.txt
to reflect the changes that have been made in the latest kernel
updates.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:31:30 +09:00
Ben Dooks
1378a7efe8 ARM: SAMSUNG: Documentation: update the list of SoCs supported
Update the list of SoCs supported for the plat-s5p range.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:31:29 +09:00
Linus Torvalds
f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
Francis Galiegue
a33f32244d Documentation/: it's -> its where appropriate
Fix obvious cases of "it's" being used when "its" was meant.

Signed-off-by: Francis Galiegue <fgaliegue@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-23 02:09:52 +02:00
viresh kumar
fc0c195aa8 ARM: 6018/1: ST SPEAr: Updated Maintainers and added Documentation/arm/SPEAr
Reviewed-by: Linus Walleij <linux.walleij@stericsson.com>

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:34:37 +01:00
Linus Torvalds
c32da02342 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
  doc: fix typo in comment explaining rb_tree usage
  Remove fs/ntfs/ChangeLog
  doc: fix console doc typo
  doc: cpuset: Update the cpuset flag file
  Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
  Remove drivers/parport/ChangeLog
  Remove drivers/char/ChangeLog
  doc: typo - Table 1-2 should refer to "status", not "statm"
  tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
  No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
  devres/irq: Fix devm_irq_match comment
  Remove reference to kthread_create_on_cpu
  tree-wide: Assorted spelling fixes
  tree-wide: fix 'lenght' typo in comments and code
  drm/kms: fix spelling in error message
  doc: capitalization and other minor fixes in pnp doc
  devres: typo fix s/dev/devm/
  Remove redundant trailing semicolons from macros
  fix typo "definetly" -> "definitely" in comment
  tree-wide: s/widht/width/g typo in comments
  ...

Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12 16:04:50 -08:00
Russell King
988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Fenkart/Bostandzhyan
18fe1cad88 ARM: 5930/1: Add PKMAP area description to memory.txt.
Also adapts delimiters of neighbouring modules area.

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:40:33 +00:00
Daniel Mack
3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
Ben Dooks
a0c814afcf ARM: SAMSUNG: Add initial documentation directory and overview
Start Documentation/arm/Samsung and add an initial overview file
which whilst is not complete, is better than nothing.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 18:53:19 +09:00
Ben Dooks
37872bb9ef ARM: SAMSUNG: Add script to change old clksrc_clk to new register defs
This script is used to change the old style clksrc_clk as originally
found in plat-s3c64xx to the new style. It is here for reference if needed
for future code merges.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:15 +09:00
Tomi Valkeinen
4d1a7c122a OMAP: DSS2: Documentation for DSS2
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-09 12:04:34 +02:00
Ben Dooks
e02f866456 ARM: S3C: Update Simtec copyright statements from , to -
There are a number of statements of the form A, B or A, B, C where
the numbers A,B,C are consecutive. Tidy these up to be A-B or A-C
as appropriate and to comply better with copyright standards [1]

[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
    section 4iii 'Year of publication'

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:33:51 +00:00
Ben Dooks
50f430e3ad ARM: S3C: Fix Simtec copyright statements in Documentation/S3C24XX
The (c) alone is not a sufficient copyright statement, nor is it a
good replacement for the proper encircled &copy; symbol [1]. Add the
word copyright to the apropriate places and remove the (c) symbol.

[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
    section 4 'What does a notice consist of?'

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:33:50 +00:00
Linus Walleij
610ea6c671 ARM: 5738/1: Correct TCM documentation
It turns out that the TCM memory can be remap:ed by the MMU just
like any other memory.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-01 16:26:16 +01:00
Russell King
baea7b946f Merge branch 'origin' into for-linus
Conflicts:
	MAINTAINERS
2009-09-24 21:22:33 +01:00
Russell King
ae19ffbadc Merge branch 'master' into for-linus 2009-09-22 21:01:40 +01:00
Linus Torvalds
73c583e4e2 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...
2009-09-18 09:19:26 -07:00
Linus Walleij
bc581770cf ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3
This adds the TCM interface to Linux, when active, it will
detect and report TCM memories and sizes early in boot if
present, introduce generic TCM memory handling, provide a
generic TCM memory pool and select TCM memory for the U300
platform.

See the Documentation/arm/tcm.txt for documentation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-15 22:11:05 +01:00
Nicolas Pitre
2f82af08fc Nicolas Pitre has a new email address
Due to problems at cam.org, my nico@cam.org email address is no longer
valid.  FRom now on, nico@fluxnic.net should be used instead.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-15 09:37:12 -07:00
Russell King
87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Paul Walmsley
c0407a96d0 OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
The interface provides device drivers, CPUFreq, and DSPBridge with a
means of controlling OMAP power management parameters that are not yet
supported by the Linux PM PMQoS interface.  Copious documentation is
in the patch in Documentation/arm/OMAP/omap_pm and the interface
header file, arch/arm/plat-omap/include/mach/omap-pm.h.

Thanks to Rajendra Nayak <rnayak@ti.com> for adding CORE (VDD2) OPP
support and moving the OPP table initialization earlier in the event
that the clock code needs them.  Thanks to Tero Kristo
<tero.kristo@nokia.com> for fixing the parameter check in
omap_pm_set_min_bus_tput().  Jouni signed off on Tero's patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Jouni Högander <jouni.hogander@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Igor Stoppa <igor.stoppa@nokia.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Veeramanikandan Raju <veera@ti.com>
Cc: Karthik Dasu <karthik-dp@ti.com>
2009-09-03 20:14:01 +03:00
Ben Dooks
dfff4e95d7 ARM: S3C: CPUFREQ: Add documentation for system
Add documentation for the S3C24XX style CPUFREQ driver.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:55 +01:00
Linus Walleij
e624859e7e ARM: 5624/1: Document cache aliasing region
Augment the memory.txt file for ARM to list the cache aliasing
region ffff4000-fffffff.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 10:44:14 +01:00
Ben Dooks
070276d5d0 [ARM] S3C24XX: GPIO: Change to macros for GPIO numbering
Prepare to remove the large number of S3C2410_GPxn defines
by moving to S3C2410_GPx(n) in arch/arm.

The following perl was used to change the files:

    perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 16:26:03 +01:00
Russell King
f5f0e17a84 Merge branch 'next-s3c-pm' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-03-26 22:44:43 +00:00
Nicolas Pitre
5f0fbf9eca [ARM] fixmap support
This is the minimum fixmap interface expected to be implemented by
architectures supporting highmem.

We have a second level page table already allocated and covering
0xfff00000-0xffffffff because the exception vector page is located
at 0xffff0000, and various cache tricks already use some entries above
0xffff0000.  Therefore the PTEs covering 0xfff00000-0xfffeffff are free
to be used.

However the XScale cache flushing code already uses virtual addresses
between 0xfffe0000 and 0xfffeffff.

So this reserves the 0xfff00000-0xfffdffff range for fixmap stuff.

The Documentation/arm/memory.txt information is updated accordingly,
including the information about the actual top of DMA memory mapping
region which didn't match the code.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-15 21:01:20 -04:00
Ben Dooks
4e59c25dcb [ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.
Since we have moved a large proportion of the PM code to the common
support area, remove the cpu specific name from the initialisation
function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:47 +00:00
Russell King
47992cbdae Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2008-12-29 18:08:11 +00:00
Eric Miao
5bfb4093be [ARM] pxa: add document on the MFP design and how to use it
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-29 17:58:18 +08:00
Nicolas Pitre
1ada1441e7 [ARM] 5348/1: fix documentation wrt location of the alignment trap interface
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-15 10:34:58 +00:00
Mike Crowe
27f680adc6 [ARM] 5323/1: Remove outdated empeg documentation.
The documents aren't particularly useful anyway and the hardware in
question has never run anything newer than a v2.2.14 kernel to my
knowledge.

Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-29 22:00:39 +00:00
Ben Dooks
f47c32f3ae [ARM] S3C24XX: Documentation: Update GPIO status
Update the status of the S3C24XX GPIO now we have
moved to supporting GPIOLIB

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-09 13:51:58 +01:00
Ben Dooks
a0f774b59e [ARM] S3C24XX: Documentation: update SD/MMC status
Update SD/MMC status now that the driver is merged.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-09 13:51:57 +01:00
Ben Dooks
bc4c7265a0 [ARM] S3C24XX: Documentation: Update suported CPU list
Update supported and in-progress cpu list.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-09 13:51:56 +01:00
Ben Dooks
cbc212e877 [ARM] S3C24XX: Documentation: update platform docs
Update documentation in arch/arm/plat-s3c24xx

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-09 13:51:55 +01:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Dmitry Baryshkov
6cab486029 [ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1].
Remove them completely. Sed script for the reference:

s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g
s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g
s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g
s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g
s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g
s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g
s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g
s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_PROBE/IRQ_TYPE_PROBE/g
s/IRQT_NOEDGE/IRQ_TYPE_NONE/g

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-27 09:46:18 +01:00
Ben Dooks
71d54f3855 [MTD] [NAND] S3C2410 Large page NAND support
This adds support for using large page NAND devices
with the S3C24XX NAND controller. This also adds the
file Documentation/arm/Samsung-S3C24XX/NAND.txt to
describe the differences.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 21:39:16 +01:00
Uwe Kleine-König
a247b5d594 fix typo 'the same the\>'
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 14:59:11 +02:00
Matt LaPlante
01dd2fbf0d typo fixes
Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.

Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:34:40 +02:00
Rob Landley
ff9e76aaba [ARM] Add missing entries to Documentation/arm/00-INDEX
Add several missing entries to Documentation/arm/00-INDEX

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 23:43:32 +01:00
John Anthony Kazos Jr
be2a608bd0 documentation: convert the Documentation directory to UTF-8
Convert files within the Documentation directory to UTF-8.

Adrian Bunk:
small additional fixes

Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:19 +02:00
Robert P. J. Day
1591275cb5 Fix "deprecated" typoes.
Fix remaining misspellings of "depreciated" to "deprecated."

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 07:18:01 +02:00
Ben Dooks
540988eb67 [ARM] 4238/1: S3C24XX: docs: update suspend and resume
Remove some of the explicit use of S3C2410 where
it is generic to all the S3C24XX series. Add more
info on the CRC code, and add an example of using
IRQ_EINT0 to resume from suspend

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02 11:58:58 +00:00
Ben Dooks
961314d37e [ARM] 4181/1: S3C24XX: Document new layout
Update Documentation/arm/Samsung-S3C24XX/Overview.txt
with the new directory layout.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:30 +00:00
Ben Dooks
9e2ad159a9 [ARM] 4180/1: S3C24XX: Update docs for S3C2412 and S3C2413
The S3C2412 and S3C2413 are supported, so document
this as so

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:27 +00:00
Ben Dooks
0c6022d453 [ARM] 4177/1: S3C24XX: Add DMA channel allocation order
Allow the CPU code, and any board specific initialisation
code to change the allocation order of the DMA channels,
or stop a peripheral allocating any DMA at-all.

This is due to the scarce mapping of DMA channels on
some earlier S3C24XX cpus, where the selection changes
depending on the channel in use.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:22 +00:00
Ben Dooks
eb3b4783ba [ARM] 4071/1: S3C24XX: Documentation update
Add documentation for the following items:

- new machines (AML M5900, VMTS, NexVision)
- updated rtc section
- removed comments about mtd cvs
- added spi section
- led section

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-30 17:05:07 +00:00
Matt LaPlante
992caacf11 Fix typos in Documentation/: 'N'-'P'
This patch fixes typos in various Documentation txts. The patch addresses
some words starting with the letters 'N'-'P'.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:52:05 +02:00
Matt LaPlante
2fe0ae78c6 Fix typos in Documentation/: 'H'-'M'
This patch fixes typos in various Documentation txts. The patch addresses
some words starting with the letters 'H'-'M'.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:50:39 +02:00
Matt LaPlante
3f6dee9b2a Fix some typos in Documentation/: 'A'
This patch fixes typos in various Documentation txts.
This patch addresses some words starting with the letter 'A'.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:45:33 +02:00
Adrian Bunk
bf6ee0ae49 remove mentionings of devfs in documentation
Now that devfs is removed, there's no longer any need to document how to
do this or that with devfs.

This patch includes some improvements by Joe Perches.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:17:48 +02:00
Adrian Bunk
fd245f0069 typo fixes: disadvantadge -> disadvantage
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 18:23:39 +02:00
Ben Dooks
f964c303fe [ARM] 3657/1: S3C24XX: Documentation update of Overview.txt
Patch from Ben Dooks

Update the list of supported devices, and remove the
changelog. Add SMDK2413 information.--

Signed-off-by: Ben Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26 22:51:08 +01:00
Ben Dooks
6e58f5c9a8 [ARM] 3656/1: S3C2412: Add S3C2412 and S3C2413 documenation
Patch from Ben Dooks

Add some basic documentation about the support for
the S3C2412 and S3C2413 CPUs--

Signed-off-by: Ben Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26 19:46:39 +01:00
Marc Singer
51cb21a9cd [ARM] 3407/1: lpd7x: documetation update
Patch from Marc Singer

New documentation for the touchscreen controllers and LCD panels.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18 16:16:51 +01:00
Erik Mouw
c8c4b939e8 [ARM] 3416/1: Update LART site URL
Patch from Erik Mouw

The LART website moved to http://www.lartmaker.nl/. This patch
updates the URL in ARM specific files.

Signed-off-by: Erik Mouw <erik@bitwizard.nl>
Acked-by: Jan-Derk Bakker <jdb@lartmaker.nl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-27 15:32:30 +01:00
Andrzej Zaborowski
13fce80629 Fix simple typos
This corrects some trivial errors in ARM docs and comments,

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-24 18:13:37 +01:00
Ben Dooks
a08ceff2a9 [ARM] 3332/1: S3C24XX - documentation update
Patch from Ben Dooks

Add devices that we have drivers for, and
update list of machines that are supported

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:03 +00:00
Russell King
db20da32a2 [ARM] Add memory.txt to 00-INDEX
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-04 17:56:46 +00:00
Randy Dunlap
98766fbe60 [PATCH] kernel Doc/ URL corrections
Correct lots of URLs in Documentation/ Also a few minor whitespace cleanups
and typo/spello fixes.  Sadly there are still a lot of bad URLs remaining.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-22 09:14:30 -08:00
Russell King
02b3083922 [ARM] Fix some corner cases in new mm initialisation
Document that the VMALLOC_END address must be aligned to 2MB since
it must align with a PGD boundary.

Allocate the vectors page early so that the flush_cache_all() later
will cause any dirty cache lines in the direct mapping will be safely
written back.

Move the flush_cache_all() to the second local_flush_cache_tlb() and
remove the now redundant first local_flush_cache_tlb().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-17 22:43:30 +00:00
Adrian Bunk
20faa7c380 [ARM] Documentation/arm/README: small update
- egcs is not supported by kernel 2.6
- gcc 3.3 seems to be a good choice on ARM

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-05 10:20:56 +00:00
Ben Dooks
6ff8f59f13 [ARM] 3076/1: S3C2410 - updated documentation for platfrom data init
Patch from Ben Dooks

Update the Documentation/arm/Samsung-S3C24XX to add
example platform data initialisation, and add the
linux-arm mailing list URL.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-01 19:44:29 +00:00
Ben Dooks
c59d071d4a [PATCH] ARM: 2847/1: S3C24XX - Documentation for USB OHCI host
Patch from Ben Dooks

Documentation for the in-built OHCI host controller
and the support for it in Linux.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-10 16:45:14 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00