The I2S reset may be asserted at a boot time, in particular this is the
case on Tegra20 AC100 netbook. Tegra20 I2S driver doesn't manage the
reset control and currently it happens to work because reset is implicitly
deasserted by the tegra-clk driver when I2S clock is enabled. The I2S
permanently stays in a reset once tegra-clk is fixed to not touch the
resets, which it shouldn't be doing. Add reset control to the Tegra20
I2S driver.
Note that I2S reset was always specified in Tegra20 device-tree, hence
DTB ABI changes aren't required.
Tested-by: Paul Fertser <fercerpav@gmail.com> # T20 AC100
Reported-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra20 AC97 driver doesn't manage the AC97 controller reset, relying on
implicit deassertion of the reset by tegra-clk driver, which needs to be
fixed since this behaviour is unacceptable by other Tegra drivers. Add
explicit reset control to the Tegra20 AC97 driver.
Note that AC97 reset was always specified in Tegra20 device-tree, hence
DTB ABI changes aren't required.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
./sound/soc/fsl/imx-hdmi.c:226:3-8: No need to set .owner here. The core
will do it.
Remove .owner field if calls are used which set it automatically
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1614848881-29637-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_params_set_rate_near can return incorrect sample rate in
some cases, e.g. when the backend output rate is set to some value higher
than 48000 Hz and the input rate is 8000 Hz. So passing the value returned
by snd_pcm_hw_params_set_rate_near to snd_pcm_hw_params will result in
"FSO/FSI ratio error" and playing no audio at all while the userland
is not properly notified about the issue.
If SRC is unable to convert the requested sample rate to the sample rate
the backend is using, then the requested sample rate should be adjusted in
rsnd_hw_params. The userland will be notified about that change in the
returned hw_params structure.
Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Link: https://lore.kernel.org/r/1615870055-13954-1-git-send-email-mikhail_durnev@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When reading from IPC flood debugfs entries no need to check whether
.cache_buf is NULL - it's impossible since otherwise the initialisation
would have failed. This also fixes a klocwork reported issue:
passed to function and may be dereferenced there by passing argument 2
to function 'memcpy' at line 510.
sound/soc/sof/debug.c:510 | sof_dfsentry_read()
Reported-by: Keqiao Zhang <keqiao.zhang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Xiuli Pan <xiulipan@outlook.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315163932.18663-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_debugfs_buf_item() is an exported function and is called from
different locations to initialise different debugfs entries. However
.cache_buf is only needed for IPC flood entries. Limit allocations
respectively.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Xiuli Pan <xiulipan@outlook.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315163932.18663-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If debugfs initialisation fails partially in sof_probe_continue() some
debugfs files and the root directory might have been created
successfully. They have to be cleaned up if some of them failed too.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Xiuli Pan <xiulipan@outlook.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315163932.18663-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
Here is a resent of the remaining patches from my
"[PATCH 0/5] AsoC: rt5640/rt5651: Volume control fixes" series,
with the controversial "[PATCH 3/5] ASoC: rt5640: Add emulated
'DAC1 Playback Switch' control" patch dropped, and these
remaining 2 patches rebased to still apply with that patch dropped.
Regards,
Hans
Hans de Goede (2):
ASoC: rt5640: Rename 'Mono DAC Playback Volume' to 'DAC2 Playback
Volume'
ASoC: Intel: bytcr_rt5640: Add used AIF to the components string
sound/soc/codecs/rt5640.c | 6 +++---
sound/soc/intel/boards/bytcr_rt5640.c | 11 ++++++++---
2 files changed, 11 insertions(+), 6 deletions(-)
--
2.30.1
v4:
corrected Fixes tag
Added added Krzysztof Kozlowski's r-v-b tag
reverted patch2 to v2 since this is the agreement.
v3:
Added Sylwester tag
Rebased and squashed fix with initial patch which was merged at some
point but can't be found in broonie/for-next (not sure what happened?)
Corrected patch subjects to tm2_wm5110
Reverted second patch to initial v1, after agreement between Krzysztof
and Sylwester
v2:
added Krzysztof Kozlowski's tags
added fix for first patch already merged as suggested by Krzysztof Kozlowski
moved variable to lower scope in patch6
Pierre-Louis Bossart (2):
ASoC: samsung: tm2_wm5110: check of of_parse return value
ASoC: samsung: tm2_wm5110: remove shadowed variable
sound/soc/samsung/tm2_wm5110.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--
2.25.1
Request dma channel from specific dma controller instead of generic
dma controller list, otherwise, may get the wrong dma controller
if there are multi dma controllers such as i.MX8MP.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614935977-21638-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on which AIF is used the UCM profile needs to setup
a different path through the rt5640's "Digital Mixer Path" graph.
ATM the UCM profiles solve this by just enabling paths to the outputs /
from the input from both AIF1 and AIF2 and then relying on the DAPM
framework to power-down the parts of the graph connected to the
unused AIF.
But in order to be able to use hardware-volumecontrol and to use
the hardware mute controls, which are necessary for mute LED control,
the UCM profiles need to know which AIF is actually being used.
Add a new "aif:1" or "aif:2" part to the component string to provide
info about the used AIF to userspace / to the UCM profiles.
Note the size of byt_rt5640_components is not increased because the
size of 32 chars already is big enough.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307150503.34906-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename 'Mono DAC Playback Volume' to 'DAC2 Playback Volume' and move it
from rt5640_specific_snd_controls[] to rt5640_snd_controls[].
The RT5640_DAC2_DIG_VOL register controlled by this mixer-element has
nothing to do with the Mono (Amplified) output which is only available
on the ALC5640 chip and not on the ALC5642 chip.
The RT5640_DAC2_DIG_VOL volume-control is the main volume control for
audio coming from the I2S2 / AIF2 input of the chip and as such is also
available on the ALC5642.
This commit results in the following userspace visible changes:
1. On devices with an ACL5640 codec, the 'Mono DAC Playback Volume'
control is renamed to 'DAC2 Playback Volume' allowing the alsa-lib
mixer code to properly group it with the 'DAC2 Playback Switch' which
is controlling the mute bits in the RT5640_DAC2_DIG_VOL register.
Note the removal of the 'Mono DAC Playback Volume' is not an issue for
userspace because the UCM profiles do not use it (the UCM profiles are
shared betweent the 5640 and 5642 and only the 5640 had this control).
2. On devices with an ACL5642 codec, there now will be a new
'DAC2 Playback Volume', grouped with the 'DAC2 Playback Switch'
Having a complete 'DAC2 Playback Volume' / 'DAC2 Playback Switch' pair
on both variants will allow enabling hardware-volume control by
setting the UCM PlaybackMasterElem to "DAC2" on devices where the
I2S2/AIF2 interface of the codec is used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307150503.34906-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/samsung/tm2_wm5110.c:605:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
sound/soc/samsung/tm2_wm5110.c:554:7: note: ret is assigned
ret = of_parse_phandle_with_args(dev->of_node, "i2s-controller",
^
sound/soc/samsung/tm2_wm5110.c:605:6: note: ret is overwritten
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
The args is a stack variable, so it could have junk (uninitialized)
therefore args.np could have a non-NULL and random value even though
property was missing. Later could trigger invalid pointer dereference.
There's no need to check for args.np because args.np won't be
initialized on errors.
Fixes: 8d1513cef5 ("ASoC: samsung: Add support for HDMI audio on TM2 board")
Cc: <stable@vger.kernel.org>
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312180231.2741-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Asus T100TAF uses the same jack-detect settings as the T100TA,
this has been confirmed on actual hardware.
Add these settings to the T100TAF quirks to enable jack-detect support
on the T100TAF.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312114850.13832-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
These are v2 of soc-pcm cleanup patches.
These has no relationship to each other.
My 1 concern is [3/8] patch. I think it is no problem,
but I'm not 100% sure why current code was such code.
Pierre-Louis / Liam might about something.
v1 -> v2
- soc_cpu/codec_dai_name() is now inline function
- rename soc_pcm_care_symmetry() to soc_pcm_update_symmetry()
v2 -> v3
- log fix at [6/8]
- Thus, it will be minus users at (2).
+ Thus, users will be a negative number at (2)
Link: https://lore.kernel.org/r/87tupuqqc8.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87tupqpg9x.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (8):
ASoC: soc-pcm: check DAI activity under soc_pcm_apply_symmetry()
ASoC: soc-pcm: add soc_cpu/codec_dai_name() macro
ASoC: soc-pcm: direct copy at snd_soc_set_runtime_hwparams()
ASoC: soc-pcm: add soc_pcm_update_symmetry()
ASoC: soc-pcm: add soc_hw_sanity_check()
ASoC: soc-pcm: fixup dpcm_be_dai_startup() user count
ASoC: soc-pcm: remove unneeded !rtd->dai_link check
ASoC: soc-pcm: share DPCM BE DAI stop operation
include/sound/soc-dpcm.h | 8 +-
sound/soc/soc-compress.c | 2 +-
sound/soc/soc-pcm.c | 243 ++++++++++++++++-----------------------
3 files changed, 105 insertions(+), 148 deletions(-)
--
2.25.1
cppcheck warning:
sound/soc/mediatek/mt8173/mt8173-afe-pcm.c:929:28: style: Local
variable 'irq' shadows outer argument [shadowArgument]
struct mtk_base_afe_irq *irq;
^
sound/soc/mediatek/mt8173/mt8173-afe-pcm.c:914:47: note: Shadowed
declaration
static irqreturn_t mt8173_afe_irq_handler(int irq, void *dev_id)
^
sound/soc/mediatek/mt8173/mt8173-afe-pcm.c:929:28: note: Shadow
variable
struct mtk_base_afe_irq *irq;
^
Not a great idea to have two 'irq' variables in the same function...
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210311004904.121205-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/mediatek/common/mtk-btcvsd.c:783:34: style: Variable 'avail'
is assigned a value that is never used. [unreadVariable]
int written_size = count, avail = 0, cur_write_idx, write_size, cont;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210311004904.121205-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm has very similar but different DPCM BE DAI stop operation at
1) dpcm_be_dai_startup() error case rollback
2) dpcm_be_dai_startup_unwind()
3) dpcm_be_dai_shutdown()
The differences are
1) for rollback
2) Doesn't check by snd_soc_dpcm_be_can_update() (Is this bug ?)
3) Do soc_pcm_hw_free() if it was not !OPENed and !HW_FREEed,
and call soc_pcm_close().
We can share same code by
1) hw_free is not needed. Needs last dpcm as rollback.
2) hw_free is not needed.
3) hw_free is needed.
This patch adds new dpcm_be_dai_stop() and share these 3.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6rduoam.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rtd->dai_link is setuped at soc_new_pcm_runtime(),
thus "rtd->dai_link == NULL" is never happen.
This patch removes unneeded !rtd->dai_link check
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blbtuoar.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At dpcm_be_dai_startup_unwind(), it indicates error message at (1)
if this function was called with no users.
But, it doesn't use "continue" here. Thus, users will be a
negative number at (2)
void dpcm_be_dai_startup_unwind(...)
{
...
for_each_dpcm_be(...) {
...
(1) if (be->dpcm[stream].users == 0)
dev_err(...);
(2) if (--be->dpcm[stream].users != 0)
continue;
At dpcm_be_dai_startup(), it indicates error message if
user reached to MAX USERS at (A).
But, it doesn't use "continue" here. Thus, it will be over
MAX USERS at (B).
int dpcm_be_dai_startup(...)
{
...
for_each_dpcm_be(...) {
...
(A) if (be->dpcm[stream].users == DPCM_MAX_BE_USERS)
dev_err(...);
(B) if (be->dpcm[stream].users++ != 0)
continue;
These are just bug. This patch fixup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czw9uoav.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_pcm_open() is checking runtime->hw parameters, but having
such function is very helpful for reading code.
This patch adds new soc_hw_sanity_check() and checks runtime->hw
parameters there. And print its debug message there, too.
Debug message print out timing is exchanged after this patch,
but it is not a big deal, because it is for debug.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eegpuob1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-pcm has soc_pcm_has_symmetry() and using it as
if (soc_pcm_has_symmetry(substream))
substream->runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX;
We want to share same operation as same function.
This patch adds soc_pcm_update_symmetry() and pack above code in
one function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ft15uob6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_set_runtime_hwparams() is called from each driver
to initialize hw parameters,
but coping each parameters one-by-one.
Current code is not copying all parameters, but no big effect
if we do it. This patch copies all parameters by simple code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7lluoba.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm needs DAI name and it will be "multicpu/multicodec" if it has
many DAIs. But current code is using very verbose for it.
This patch uses macro and makes code simple.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87im61uobf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_apply_symmetry() is used like below in all cases.
if (snd_soc_dai_active(dai)) {
err = soc_pcm_apply_symmetry(fe_substream, dai);
...
}
Because of this style, the code is deep nested.
This patch checks it under soc_pcm_apply_symmetry(), and makes code simple.
static int soc_pcm_apply_symmetry(...)
{
...
=> if (!snd_soc_dai_active(...))
return 0;
...
}
=> ret = soc_pcm_apply_symmetry();
if (ret < 0)
...
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0qhuobl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The series reuses mt8183-mt6358-ts3a227-max98357.c for supporting
machine driver with rt1015p speaker amplifier.
The 1st patch adds document for the new proposed compatible string.
The 2nd patch changes the machine driver to support "RT1015P" codec.
Tzung-Bi Shih (2):
ASoC: dt-bindings: mt8183: add compatible string for using rt1015p
ASoC: mediatek: mt8183: support machine driver with rt1015p
.../sound/mt8183-mt6358-ts3a227-max98357.txt | 1 +
sound/soc/mediatek/Kconfig | 1 +
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 29 +++++++++++++++++++
3 files changed, 31 insertions(+)
--
2.31.0.rc2.261.g7f71774620-goog
When DMI information is not present, trying to assign the card long
name results in the following warning.
WARNING KERN tegra-audio-graph-card sound: ASoC: no DMI vendor name!
The initial solution suggested was to test if the card device is an
ACPI one. This causes a regression visible to userspace on all Intel
platforms, with UCM unable to load card profiles based on DMI
information: the card devices are not necessarily ACPI ones, e.g. when
the parent creates platform devices on Intel devices.
To fix this problem, this patch exports the existing dmi_available
variable and tests it in the ASoC core.
Fixes: c014170408 ("ASoC: soc-core: Prevent warning if no DMI table is present")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20210310193928.108850-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Supports machine driver with rt1015p ("mt8183_mt6358_ts3a227_rt1015p").
Embeds in the existing mt8183-mt6358-ts3a227-max98357.c because they
share most of the code.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210311033151.1818603-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/wm_adsp.c:2092:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/wm_adsp.c:2070:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/codecs/wm_adsp.c:2092:9: note: Returning identical
expression 'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210311004332.120901-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/codecs/wm8903.c:1552:11: style: Variable 'best_val' is
assigned a value that is never used. [unreadVariable]
best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk;
^
sound/soc/codecs/wm8903.c:1559:12: style: Variable 'best_val' is
assigned a value that is never used. [unreadVariable]
best_val = cur_val;
^
Indeed what matters in the code is the blck_div, the best_val is
assigned but never tested or used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210311004332.120901-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains about some members not being used, but it's really
the entire structure that is never used anywhere.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210311004332.120901-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
Here is a patch series for reporting to user space jack and button events and
add the support for Capture. With some cleanups and fixes along the way.
Regards,
Lucas Tanure
Lucas Tanure (12):
ASoC: cs42l42: Fix Bitclock polarity inversion
ASoC: cs42l42: Fix channel width support
ASoC: cs42l42: Fix mixer volume control
ASoC: cs42l42: Don't enable/disable regulator at Bias Level
ASoC: cs42l42: Always wait at least 3ms after reset
ASoC: cs42l42: Remove power if the driver is being removed
ASoC: cs42l42: Disable regulators if probe fails
ASoC: cs42l42: Provide finer control on playback path
ASoC: cs42l42: Set clock source for both ways of stream
ASoC: cs42l42: Add Capture Support
ASoC: cs42l42: Report jack and button detection
ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called
Richard Fitzgerald (3):
ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT
ASoC: cs42l42: Only start PLL if it is needed
ASoC: cs42l42: Wait for PLL to lock before switching to it
sound/soc/codecs/cs42l42.c | 435 +++++++++++++++++++++----------------
sound/soc/codecs/cs42l42.h | 41 +++-
2 files changed, 282 insertions(+), 194 deletions(-)
--
2.30.1
This patch keeps the delay time (50 ms) for jack detection and zero delay time for the button press.
This patch improves the reaction of the button press.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210309085827.32032-1-shumingf@realtek.com
Tested-by Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error, the function devm_regmap_init_sdw_mbq() and
devm_regmap_init_sdw() returns ERR_PTR() not NULL. The NULL test
in the return value check should be replaced with IS_ERR().
Fixes: 393c52d2d109 ("ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210309131458.1884899-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PLL is only needed for sclk < 11289600 Hz and cs42l42_pll_config()
will not configure it for higher rates. So it must only be enabled
when it is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-15-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There must be a delay of at least 150us after writing SCLK_PRESENT
before issuing another I2C write.
This is done using struct reg_sequence because it can specify a delay
after the write and the whole sequence is written atomically.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-14-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for reading the source clock from snd_soc_params_to_bclk
so the machine driver is not required to call cs42l42_set_sysclk
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-13-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Report the Jack events to the user space through ALSA.
Also moves request_threaded_irq() to component_probe so it don't get
interrupts before the initialization the struct snd_soc_jack.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-12-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Asus T100HA and T101HA 2-in-1s use a rt5645 family codec and always
report that a headset (rather then headphones) are plugged in even when
regular headphones are plugged in.
And when a headset is used, then the headset-microphone does not work.
According to RealTek the ALC3270 variant used in these devices does not
support headsets only headphones.
Since the ALC3270 is a budget version of the regular ALC5645 codec,
I assume that it is using a package with less pins and the headset-mic
pin is simply not connected.
Detect if the codec is an ALC3270 based on the ACPI HID and if it is
an ALC3270 then always report SND_JACK_MICROPHONE as false, so that
userspace will not try to use the not-connected headset-mic.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210306230223.516566-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt5645.c is the only user of the rt5645_platform_data,
move its definition to sound/soc/codecs/rt5645.c and remove the now
empty include/sound/rt5645.h file.
Note since the DMI quirk mechanism uses pointers to the
rt5645_platform_data struct we can NOT simply add its members to
the rt5645_priv struct and completely remove the struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210306230223.516566-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_platform_ioremap_resource has already contained
error message if failed, so remove superfluous dev_err here.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210307072133.10832-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With S20_3LE format case, the sysclk = rate * 384,
the bclk = rate * 20 * 2, there is no proper bclk divider
for 384 / 40, because current condition needs exact match.
So driver fails to configure the clocking:
wm8962 3-001a: Unsupported BCLK ratio 9
Fix this by relaxing bitclk divider searching, so that when
no exact value can be derived from sysclk pick the closest
value greater than expected bitclk.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1615170877-25918-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A previous cleanup commit removed the ininitialization of st2_mem_alloc.
Fix this by restoring the original behaviour by initializing it to zero.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: e80382fe721f ("ASoC: fsl: fsl_easrc: remove useless assignments")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210303091835.5024-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
./sound/soc/codecs/lpass-rx-macro.c:3588:3-8: No need to set .owner here.
The core will do it.
Remove .owner field if calls are used which set it automatically
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1614762481-102466-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error, the function devm_regmap_init_sdw() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: a262057df513 ("ASoC: rt1316: Add RT1316 SDCA vendor-specific driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210303064041.898281-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_platform_ioremap_resource has already contained
error message, so remove the redundant dev_err here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210302135630.11456-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/qcom/qdsp6/q6afe.c:1460: warning: expecting prototype for
q6afe_dam_port_prepare(). Prototype was for
q6afe_cdc_dma_port_prepare() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/intel/boards/bytcr_wm5102.c:216:40: error:
‘byt_wm5102_dai_params’ defined but not used
[-Werror=unused-const-variable=]
216 | static const struct snd_soc_pcm_stream byt_wm5102_dai_params = {
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/fsl/fsl_ssi.c:371: warning: expecting prototype for
fsl_ssi_irq(). Prototype was for fsl_ssi_isr() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/amd/renoir/rn-pci-acp3x.c:24: warning: wrong kernel-doc
identifier on line:
* dmic_acpi_check = -1 - Use ACPI/DMI method to detect the DMIC
hardware presence at runtime
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/codecs/sigmadsp-regmap.c:42: warning: expecting prototype
for devm_sigmadsp_init_i2c(). Prototype was for
devm_sigmadsp_init_regmap() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/codecs/rt5631.c:446: warning: expecting prototype for
onebit_depop_power_stage(). Prototype was for depop_seq_power_stage()
instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/codecs/jz4760.c: In function ‘jz4760_codec_startup’:
sound/soc/codecs/jz4760.c:201:6: error: variable ‘ret’ set but not
used [-Werror=unused-but-set-variable]
201 | int ret;
| ^~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains about a possible null pointer dereference, but the
problem is rather an useless initialization before walking through a
list.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/codecs/rt5682.c🔢6: style: Redundant initialization for
'idx'. The initialized value is overwritten before it is
read. [redundantInitialization]
idx = rt5682_div_sel(rt5682, dmic_clk_rate, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5682.c:1228:10: note: idx is initialized
int idx = -EINVAL, dmic_clk_rate = 3072000;
^
sound/soc/codecs/rt5682.c🔢6: note: idx is overwritten
idx = rt5682_div_sel(rt5682, dmic_clk_rate, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5682.c:1263:6: style: Redundant initialization for
'idx'. The initialized value is overwritten before it is
read. [redundantInitialization]
idx = rt5682_div_sel(rt5682, ref, div_f, ARRAY_SIZE(div_f));
^
sound/soc/codecs/rt5682.c:1248:25: note: idx is initialized
int ref, val, reg, idx = -EINVAL;
^
sound/soc/codecs/rt5682.c:1263:6: note: idx is overwritten
idx = rt5682_div_sel(rt5682, ref, div_f, ARRAY_SIZE(div_f));
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5682.c:2401:65: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5682_PLL_M_SFT |
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5677.c:5335:10: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
int ret = 0, loop, i, reg_irq, virq;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5677.c:4571:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5677_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5670.c:2519:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5670_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/codecs/rt5668.c:1177:6: style: Redundant initialization for
'idx'. The initialized value is overwritten before it is
read. [redundantInitialization]
idx = rt5668_div_sel(rt5668, 1500000, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5668.c:1174:10: note: idx is initialized
int idx = -EINVAL;
^
sound/soc/codecs/rt5668.c:1177:6: note: idx is overwritten
idx = rt5668_div_sel(rt5668, 1500000, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5668.c:1202:6: style: Redundant initialization for
'idx'. The initialized value is overwritten before it is
read. [redundantInitialization]
idx = rt5668_div_sel(rt5668, ref, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5668.c:1191:25: note: idx is initialized
int ref, val, reg, idx = -EINVAL;
^
sound/soc/codecs/rt5668.c:1202:6: note: idx is overwritten
idx = rt5668_div_sel(rt5668, ref, div, ARRAY_SIZE(div));
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5668.c:2185:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5668_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5665.c:4388:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5665_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5663_PLL_M_SHIFT |
^
sound/soc/codecs/rt5663.c:2955:63: style: Boolean result is used in
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5660.c:1060:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5660_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5659.c:3515:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5659_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5651.c:1786:13: style: Variable 'report' is
assigned a value that is never used. [unreadVariable]
int report = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5659.c:3515:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5659_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5645.c:2959:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5645_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5645.c:693:37: style:inconclusive: Boolean
expression 'reg>=420&®<=461' is used in bitwise operation. Did you
mean '||'? [bitwiseOnBoolean]
if ((reg >= 0x1a4 && reg <= 0x1cd) | (reg >= 0x1e5 && reg <= 0x1f8) |
^
sound/soc/codecs/rt5645.c:693:70: style:inconclusive: Boolean
expression 'reg==177' is used in bitwise operation. Did you mean '||'?
[bitwiseOnBoolean]
if ((reg >= 0x1a4 && reg <= 0x1cd) | (reg >= 0x1e5 && reg <= 0x1f8) |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5640.c:1923:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5640_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
