Currently, none of the X1E80100 supported boards upstream have enabled
DP. As for USB, the reason it is not broken when it's obvious that the
offsets are wrong is because the only difference with respect to USB is
the difference in register name. The V6 uses QPHY_V6_PCS_CDR_RESET_TIME
while V6 N4 uses QPHY_V6_N4_PCS_RX_CONFIG. Now, in order for the DP to
work, the DP serdes tables need to be added as they have different
values for V6 N4 when compared to V6 ones, even though they use the same
V6 offsets. While at it, switch swing and pre-emphasis tables to V6 as
well.
Fixes: d7b3579f84 ("phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-3-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new X1E80100 SoC bumps up the HW version of QMP phy to v6 N4 for
combo USB and DP PHY. Currently, the X1E80100 uses the pure V6 PCS
register offsets, which are different. Add the offsets so the
mentioned platform can be fixed later on. Add the new PCS offsets
in a dedicated header file.
Fixes: d7b3579f84 ("phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-2-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, the x1e80100 uses pure V6 register offsets for DP part of the
combo PHY. This hasn't been an issue because external DP is not yet
enabled on any of the boards yet. But in order to enabled it, all these
new V6 N4 register offsets are needed. So add them.
Fixes: 762c3565f3 ("phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-1-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- New Support
- Support for Embedded DisplayPort and DisplayPort submodes and driver
support on Qualcomm X1E80100 edp driver
- Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000 and
eusb2-repeater for SMB2360
- Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
- Mediatek XFI T-PHY support for mt7988
- Rockchip usbdp combo phy driver
- Updates
- Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for X1E80100,
SM8650 tables for UFS Gear 4 & 5 and correct voltage swing tables
- Freescale imx8m-pci pcie link-up updates
- Rockchip rx-common-refclk-mode support
- More platform remove callback returning void conversions
-----BEGIN PGP SIGNATURE-----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=og1j
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull generic phy updates from Vinod Koul:
"New HW Support:
- Support for Embedded DisplayPort and DisplayPort submodes and
driver support on Qualcomm X1E80100 edp driver
- Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
and eusb2-repeater for SMB2360
- Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
- Mediatek XFI T-PHY support for mt7988
- Rockchip usbdp combo phy driver
Updates:
- Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
swing tables
- Freescale imx8m-pci pcie link-up updates
- Rockchip rx-common-refclk-mode support
- More platform remove callback returning void conversions"
* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
phy: samsung-ufs: ufs: exit on first reported error
phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
phy: rockchip: fix CONFIG_TYPEC dependency
phy: rockchip: usbdp: fix uninitialized variable
phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
phy: rockchip: add usbdp combo phy driver
dt-bindings: phy: add rockchip usbdp combo phy document
phy: add driver for MediaTek XFI T-PHY
dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
...
Updates for v6.10
Core:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings (no driver changes, using SM8350
as a fallback compat)
GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com
Add support for x4 lane end point mode PHY found on sa8755p platform.
Reusing existing serdes and pcs_misc table for EP and moved
BIAS_EN_CLKBUFLR_EN register from RC serdes table to common serdes
table as this register is part of both RC and EP.
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1714494089-7917-2-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To preserve the err value, exit the loop immediately if an error
is returned.
Fixes: f2c6d0fa19 ("phy: samsung-ufs: use exynos_get_pmu_regmap_by_phandle() to obtain PMU regmap")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426104129.2211949-3-peter.griffin@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
mfd/syscon.h header is no longer required since the update to
exynos_get_pmu_regmap_by_phandle() api.
Fixes: f2c6d0fa19 ("phy: samsung-ufs: use exynos_get_pmu_regmap_by_phandle() to obtain PMU regmap")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426104129.2211949-2-peter.griffin@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The newly added driver causes a warning about missing dependencies
by selecting CONFIG_TYPEC unconditionally:
WARNING: unmet direct dependencies detected for TYPEC
Depends on [n]: USB_SUPPORT [=n]
Selected by [y]:
- PHY_ROCKCHIP_USBDP [=y] && ARCH_ROCKCHIP [=y] && OF [=y]
WARNING: unmet direct dependencies detected for USB_COMMON
Depends on [n]: USB_SUPPORT [=n]
Selected by [y]:
- EXTCON_RTK_TYPE_C [=y] && EXTCON [=y] && (ARCH_REALTEK [=y] || COMPILE_TEST [=y]) && TYPEC [=y]
Since that is a user-visible option, it should not really be selected
in the first place. Replace the 'select' with a 'depends on' as
we have for similar drivers.
Fixes: 2f70bbddeb ("phy: rockchip: add usbdp combo phy driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240415174241.77982-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ret variable may not be initialized in rk_udphy_usb3_phy_init(), if
the PHY is not using USB3 mode.
Since the DisplayPort part is handled separately and the PHY does not
support USB2 (which is routed to another PHY on Rockchip RK3588), the
right exit code for this case is 0. Thus let's initialize the variable
accordingly.
Fixes: 2f70bbddeb ("phy: rockchip: add usbdp combo phy driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404141048.qFAYDctQ-lkp@intel.com/
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240416145233.94687-1-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
>From the RK3588 Technical Reference Manual, Part1,
section 6.19 PCIe3PHY_GRF Register Description:
"rxX_cmn_refclk_mode"
RX common reference clock mode for lane X. This mode should be enabled
only when the far-end and near-end devices are running with a common
reference clock.
The hardware reset value for this field is 0x1 (enabled).
Note that this register field is only available on RK3588, not on RK3568.
The link training either fails or is highly unstable (link state will jump
continuously between L0 and recovery) when this mode is enabled while
using an endpoint running in Separate Reference Clock with No SSC (SRNS)
mode or Separate Reference Clock with SSC (SRIS) mode.
(Which is usually the case when using a real SoC as endpoint, e.g. the
RK3588 PCIe controller can run in both Root Complex and Endpoint mode.)
Add support for the device tree property rockchip,rx-common-refclk-mode,
such that the PCIe PHY can be used in configurations where the Root
Complex and Endpoint are not using a common reference clock.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240412125818.17052-3-cassel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This adds a new USBDP combo PHY with Samsung IP block driver.
The driver get lane mux and mapping info in 2 ways, supporting
DisplayPort alternate mode or parsing from DT. When parsing from DT,
the property "rockchip,dp-lane-mux" provide the DP mux and mapping
info. This is needed when the PHY is not used with TypeC Alt-Mode.
For example if the USB3 interface of the PHY is connected to a USB
Type A connector and the DP interface is connected to a DisplayPort
connector.
When do DP link training, need to set lane number, link rate, swing,
and pre-emphasis via PHY configure interface.
Co-developed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Co-developed-by: Zhang Yubing <yubing.zhang@rock-chips.com>
Signed-off-by: Zhang Yubing <yubing.zhang@rock-chips.com>
Co-developed-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-3-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The power_supply frame-work is not really designed for there to be
long living in kernel references to power_supply devices.
Specifically unregistering a power_supply while some other code has
a reference to it triggers a WARN in power_supply_unregister():
WARN_ON(atomic_dec_return(&psy->use_cnt));
Folllowed by the power_supply still getting removed and the
backing data freed anyway, leaving the tusb1210 charger-detect code
with a dangling reference, resulting in a crash the next time
tusb1210_get_online() is called.
Fix this by only holding the reference in tusb1210_get_online()
freeing it at the end of the function. Note this still leaves
a theoretical race window, but it avoids the issue when manually
rmmod-ing the charger chip driver during development.
Fixes: 48969a5623 ("phy: ti: tusb1210: Add charger detection")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406140821.18624-1-hdegoede@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 5abed58a8b ("phy: qcom: qmp-combo: Fix VCO div offset on v3")
fixed a regression introduced in 6.5 by making sure that the correct
offset is used for the DP_PHY_VCO_DIV register on v3 hardware.
Unfortunately, that fix instead broke DisplayPort on v5_5nm and v6
hardware as it failed to add the corresponding offsets also to those
register tables.
Fixes: 815891eee6 ("phy: qcom-qmp-combo: Introduce orientation variable")
Fixes: 5abed58a8b ("phy: qcom: qmp-combo: Fix VCO div offset on v3")
Cc: stable@vger.kernel.org # 6.5: 5abed58a8b
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20240408093023.506-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add driver for MediaTek's XFI T-PHY which can be found in the MT7988
SoC. The XFI T-PHY is a 10 Gigabit/s Ethernet SerDes PHY with muxes on
the internal side to be used with either USXGMII PCS or LynxI PCS,
depending on the selected PHY interface mode.
The PHY can operates only in PHY_MODE_ETHERNET, the submode is one of
PHY_INTERFACE_MODE_* corresponding to the supported modes:
* USXGMII \
* 10GBase-R }- USXGMII PCS - XGDM \
* 5GBase-R / \
}- Ethernet MAC
* 2500Base-X \ /
* 1000Base-X }- LynxI PCS - GDM /
* Cisco SGMII (MAC side) /
I chose the name XFI T-PHY because names of functions dealing with the
phy in the vendor driver are prefixed "xfi_pextp_".
The register space used by the phy is called "pextp" in the vendor
sources, which could be read as "_P_CI _ex_press _T_-_P_hy", and that
is quite misleading as this phy isn't used for anything related to
PCIe, so I wanted to find a better name.
XFI is still somehow related (as in: you would find the relevant
places using grep in the vendor driver when looking for that) and the
term seemed to at least somehow be aligned with the function of that
phy: Dealing with (up to) 10 Gbit/s Ethernet serialized differential
signals.
In order to work-around a performance issue present on the first of
two XFI T-PHYs found in MT7988, special tuning is applied which can
be selected by adding the 'mediatek,usxgmii-performance-errata'
property to the device tree node, similar to how the vendor driver is
doing that too.
There is no documentation for most registers used for the
analog/tuning part, however, most of the registers have been partially
reverse-engineered from MediaTek's SDK implementation (see links, an
opaque sequence of 32-bit register writes) and descriptions for all
relevant digital registers and bits such as resets and muxes have been
supplied by MediaTek.
Link: b72d6cba92/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c
Link: dec96a1d9b/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_eth_soc.c
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/8719c82634df7e8e984f1a608be3ba2f2d494fb4.1712625857.git.daniel@makrotopia.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240409161505.66619-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update the SM8650 UFS PHY init tables to support Gear 4 and Gear 5
using the overlays setup (only supported Gear 5 before), and sync
back with the latest Qualcomm recommended values.
The new recommended values allow a solid 50% bump in sequential
read/write benchmarks on the SM8650 QRD & HDK reference boards.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240410-topic-sm8650-upstream-ufs-g5-v1-1-5527c44b37e6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Ensure CONFIG_RATIONAL is selected in order to fix the following link
error with some kernel configurations:
drivers/phy/rockchip/phy-rockchip-samsung-hdptx.o: in function `rk_hdptx_ropll_tmds_cmn_config':
phy-rockchip-samsung-hdptx.c:(.text+0x950): undefined reference to `rational_best_approximation'
Fixes: 553be2830c ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404090540.2l1TEkDF-lkp@intel.com/
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240408222926.32708-1-cristian.ciocaltea@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the 'qcom,ipq5332-usb-hsphy.yaml' schema, the 5V
supply regulator must be defined via the 'vdd-supply' property.
The driver however requests for the 'vdda-phy' regulator which
results in the following message when the driver is probed on
a IPQ5018 based board with a device tree matching to the schema:
qcom-m31usb-phy 5b000.phy: supply vdda-phy not found, using dummy regulator
qcom-m31usb-phy 5b000.phy: Registered M31 USB phy
This means that the regulator specified in the device tree never
gets enabled.
Change the driver to use the 'vdd' name for the regulator as per
defined in the schema in order to ensure that the corresponding
regulator gets enabled.
Fixes: 08e49af507 ("phy: qcom: Introduce M31 USB PHY driver")
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240406-phy-qcom-m31-regulator-fix-v2-1-c8e9795bc071@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The register base that was used to write to the QSERDES_DP_PHY_MODE
register was 'dp_dp_phy' before commit 815891eee6 ("phy:
qcom-qmp-combo: Introduce orientation variable"). There isn't any
explanation in the commit why this is changed, so I suspect it was an
oversight or happened while being extracted from some other series.
Oddly the value being 0x4c or 0x5c doesn't seem to matter for me, so I
suspect this is dead code, but that can be fixed in another patch. It's
not good to write to the wrong register space, and maybe some other
version of this phy relies on this.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: stable@vger.kernel.org # 6.5
Fixes: 815891eee6 ("phy: qcom-qmp-combo: Introduce orientation variable")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240405000111.1450598-1-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit ec17373aeb ("phy: qcom: qmp-combo: extract common function to
setup clocks") changed the offset that is used to write to
DP_PHY_VCO_DIV from QSERDES_V3_DP_PHY_VCO_DIV to
QSERDES_V4_DP_PHY_VCO_DIV. Unfortunately, this offset is different
between v3 and v4 phys:
#define QSERDES_V3_DP_PHY_VCO_DIV 0x064
#define QSERDES_V4_DP_PHY_VCO_DIV 0x070
meaning that we write the wrong register on v3 phys now. Add another
generic register to 'regs' and use it here instead of a version specific
define to fix this.
This was discovered after Abhinav looked over register dumps with me
from sc7180 Trogdor devices that started failing to light up the
external display with v6.6 based kernels. It turns out that some
monitors are very specific about their link clk frequency and if the
default power on reset value is still there the monitor will show a
blank screen or a garbled display. Other monitors are perfectly happy to
get a bad clock signal.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: ec17373aeb ("phy: qcom: qmp-combo: extract common function to setup clocks")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240404234345.1446300-1-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The pcie1l0_sel and pcie1l1_sel bits in PCIESEL_CON configure the
mux for PCIe1L0 and PCIe1L1 to either the PIPE Combo PHYs or the
PCIe3 PHY. Thus this configuration interfers with the data-lanes
configuration done by the PCIe3 PHY.
RK3588 has three Combo PHYs. The first one has a dedicated PCIe
controller and is not affected by this. For the other two Combo
PHYs, there is one mux for each of them.
pcie1l0_sel selects if PCIe 1L0 is muxed to Combo PHY 1 when
bit is set to 0 or to the PCIe3 PHY when bit is set to 1.
pcie1l1_sel selects if PCIe 1L1 is muxed to Combo PHY 2 when
bit is set to 0 or to the PCIe3 PHY when bit is set to 1.
Currently the code always muxes 1L0 and 1L1 to the Combi PHYs
once one of them is being used in PCIe mode. This is obviously
wrong when at least one of the ports should be muxed to the
PCIe3 PHY.
Fix this by introducing Combo PHY identification and then only
setting up the required bit.
Fixes: a03c442772 ("phy: rockchip: Add naneng combo phy support for RK3588")
Reported-by: Michal Tomek <mtdev79b@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240404-rk3588-pcie-bifurcation-fixes-v1-3-9907136eeafd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently the PCIe v3 PHY driver only sets the pcie1ln_sel bits, but
does not clear them because of an incorrect write mask. This fixes up
the issue by using a newly introduced constant for the write mask.
While at it also introduces a proper GENMASK based constant for the
PCIE30_PHY_MODE.
Fixes: 2e9bffc4f7 ("phy: rockchip: Support PCIe v3")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240404-rk3588-pcie-bifurcation-fixes-v1-2-9907136eeafd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
So far all RK3588 boards use fully aggregated PCIe. CM3588 is one
of the few boards using this feature and apparently it is broken.
The PHY offers the following mapping options:
port 0 lane 0 - always mapped to controller 0 (4L)
port 0 lane 1 - to controller 0 or 2 (1L0)
port 1 lane 0 - to controller 0 or 1 (2L)
port 1 lane 1 - to controller 0, 1 or 3 (1L1)
The data-lanes DT property maps these as follows:
0 = no controller (unsupported by the HW)
1 = 4L
2 = 2L
3 = 1L0
4 = 1L1
That allows the following configurations with first column being the
mainline data-lane mapping, second column being the downstream name,
third column being PCIE3PHY_GRF_CMN_CON0 and PHP_GRF_PCIESEL register
values and final column being the user visible lane setup:
<1 1 1 1> = AGGREG = [4 0] = x4 (aggregation)
<1 1 2 2> = NANBNB = [0 0] = x2 x2 (no bif.)
<1 3 2 2> = NANBBI = [1 1] = x2 x1x1 (bif. of port 0)
<1 1 2 4> = NABINB = [2 2] = x1x1 x2 (bif. of port 1)
<1 3 2 4> = NABIBI = [3 3] = x1x1 x1x1 (bif. of both ports)
The driver currently does not program PHP_GRF_PCIESEL correctly, which
is fixed by this patch. As a side-effect the new logic is much simpler
than the old logic.
Fixes: 2e9bffc4f7 ("phy: rockchip: Support PCIe v3")
Signed-off-by: Michal Tomek <mtdev79b@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240404-rk3588-pcie-bifurcation-fixes-v1-1-9907136eeafd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the m-phy tuning values for gs101 UFS phy and SoC callbacks
gs101_phy_wait_for_calibration() and gs101_phy_wait_for_cdr_lock().
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240404122559.898930-12-peter.griffin@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some SoCs like gs101 don't fit in well with the existing pll lock and
clock data recovery (CDR) callback used by existing exynos platforms.
Allow SoCs to specifify and implement their own calibration and CDR
functions that can be called by the generic samsung phy code.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240404122559.898930-11-peter.griffin@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This allows us to obtain a PMU regmap that is created by the exynos-pmu
driver. Platforms such as gs101 require exynos-pmu created regmap to
issue SMC calls for PMU register accesses. Existing platforms still get
a MMIO regmap as before.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240404122559.898930-10-peter.griffin@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Leaving AUX_PLL_REFCLK_SEL at its reset default of AUX_IN (PLL clock)
proves to be more stable on the i.MX 8M Mini.
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20240322130646.1016630-2-marcel@ziswiler.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the phy_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-phy-v1-1-106013a644dc@marliere.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock,
enable this second clock by setting the proper 20MHz hardware rate in
the Gen4x2 SM8[456]50 aux_clock_rate config fields.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-4-3ec0a966d52f@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock,
add the code to register it for PHYs configs that sets a aux_clock_rate.
In order to get the right clock, add qmp_pcie_clk_hw_get() which uses
the newly introduced QMP_PCIE_PIPE_CLK & QMP_PCIE_PHY_AUX_CLK clock
IDs and also supports the legacy bindings by returning the PIPE clock
when #clock-cells=0.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-3-3ec0a966d52f@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock,
in order to expose it, split the current clock registering in two parts:
- CCF clock registering
- DT clock registering
Keep the of_clk_add_hw_provider/devm_add_action_or_reset to keep
compatibility with the legacy subnode bindings.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-2-3ec0a966d52f@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is an out of bounds read access of 'gbe_phy_init_fix[fix_idx].addr'
every iteration after 'fix_idx' reaches 'ARRAY_SIZE(gbe_phy_init_fix)'.
Make sure 'gbe_phy_init[addr]' is used when all elements of
'gbe_phy_init_fix' array are handled.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 934337080c ("phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240321164734.49273-1-m.kobuk@ispras.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/57a3338a1cec683ac84d48e00dbf197e15ee5481.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Several functions had "rochchip" instead of "rockchip" in their name.
Replace "rochchip" by "rockchip".
Signed-off-By: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240307095318.3651498-1-rick.wertenbroek@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The QMP USB3/DP PHY found in the SM8650 SoC requires a slightly
different Voltage Swing table for HBR/RBR link speeds.
Add a new hbr/rbr voltage switch table named "v6" used in a new
sm8650 qmp_phy_cfg struct replacing the sm8550 fallback used for
the sm8650 compatible.
Fixes: 80c1afe8c5 ("phy: qcom: qmp-combo: add QMP USB3/DP PHY tables for SM8650")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240226-topic-sm8650-upstream-combo-phy-swing-update-v1-1-08707ebca92a@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add v6 HW support by implementing the version ops. Add the X1E80100
compatible and match config as it is v6.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240221-phy-qualcomm-edp-x1e80100-v4-3-4e5018877bee@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Future platforms should not use different compatibles to differentiate
between eDP and DP mode. Instead, they should use a single compatible as
the IP block is the same. It will be the job of the controller to set the
submode of the PHY accordingly.
The existing platforms will remain with separate compatibles for each
mode.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240324-x1e80100-phy-edp-compatible-refactor-v5-2-a0db5f3150bc@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This adds the driver for the Samsung HDMI PHY found on the
i.MX8MP SoC. Based on downstream implementation from
Sandor Yu <Sandor.yu@nxp.com>. According to the TRM, the PHY
receives parallel data from the link and serializes it. It
also sets the PLL clock needed for the TX serializer.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Co-developed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Link: https://lore.kernel.org/r/20240227220444.77566-3-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of
tiny changes and forward progress to support new hardware and better
support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwpzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymS9QCdEuF6KJFLOrDrGS4NbZNSUPIVF6oAn350r4NX
CMZah37Dfr1VDCOOV4gQ
=HACL
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
This patch introduces a new API, tegra_xusb_padctl_get_port_number,
to the Tegra XUSB Pad Controller driver. This API is used to identify
the USB port that is associated with a given PHY.
The function takes a PHY pointer for either a USB2 PHY or USB3 PHY as input
and returns the corresponding port number. If the PHY pointer is invalid,
it returns -ENODEV.
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240307030328.1487748-2-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
