Improve the readability and keeps the lines shorter than 80 columns.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ioctl->cmd_drv is pointless and we can just as well stick the full ioctl
definition into ioctl->cmd.
Cc: Jakob Bornecrantz <jakob@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently DRM_IOCTL_DEF_DRV does '[DRM_IOCTL_NR(DRM_##ioctl)]' which
doesn't make much sense since DRM_##ioctl is already a the raw ioctl
number. So change it to 'DRM_IOCTL_NR(DRM_IOCTL_##ioctl) - DRM_COMMAND_BASE'
which means the DRM_IOCTL_NR() now makes sense, and also this also means
if there's a mistake in the DRM_IOCTL_##ioctl macros we might get a
warning about it (eg. we would have gotten a sparse warning about the
i915 colorkey get/set ioctl being defined to be the same thing).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
radeon requires this to get the slots for later filling
out a table on every transition.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There has been some confusion about this struct. Lack of documentation
probably didn't help.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Older DisplayPort to DVI-D Dual Link adapters designed by Bizlink have bugs
in their I2C over AUX implementation (fixed in newer revisions). They work
fine with Windows, but fail with Linux.
It turns out that they cannot keep an I2C transaction open unless the
previous read was 16 bytes; shorter reads can only be followed by a zero
byte transfer ending the I2C transaction.
Copy Windows's behaviour, and read 16 bytes at a time. If we get a short
reply, assume that there's a hardware bottleneck, and shrink our read size
to match. For this purpose, use the algorithm in the DisplayPort 1.2 spec,
in the hopes that it'll be closest to what Windows does.
Also provide an unsafe module parameter for testing smaller transfer sizes,
in case there are sinks out there that cannot work with Windows.
Note also that despite the previous comment in drm_dp_i2c_xfer, this speeds
up native DP EDID reads; Ville Syrjälä <ville.syrjala@linux.intel.com> found
the following changes in his testing:
Device under test: old -> with this patch
DP->DVI (OUI 001cf8): 40ms -> 35ms
DP->VGA (OUI 0022b9): 45ms -> 38ms
Zotac DP->2xHDMI: 25ms -> 4ms
Asus PB278 monitor: 22ms -> 3ms
A back of the envelope calculation shows that peak theoretical transfer rate
for 1 byte reads is around 60 kbit/s; with 16 byte reads, this increases to
around 500 kbit/s, which explains the increase in speed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55228
Tested-by: Aidan Marks <aidanamarks@gmail.com> (v3)
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Drivers implementing the universal planes API report the list of
supported pixel formats for the primary plane. Make sure the fb passed
to the setcrtc ioctl is compatible.
Drivers not implementing the universal planes API will have no format
reported for the primary plane, skip the check in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We shouldn't tempt driver writers into using this since it uses a
default format list which is likely wrong. And when that's done we can
simplify the code a bit, too.
Noticed while reviewing a patch from Laurent.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Both the legacy and atomic helpers need to check whether a plane
supports a given pixel format. The code is currently duplicated, share
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Slightly extend the docbook.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a number of DPCD definitions from eDP 1.4.
v2: s/DP_ALPM_LOCK_TIMEOUT_ERROR_STATUS/DP_ALPM_LOCK_TIMEOUT_ERROR/
(Sonika)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a number of DPCD definitions from DP 1.1 and 1.2a.
v2: drop wrong DP version reference, rename DP training set macros
(Sonika).
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mostly display control related DPCD addresses.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Keep the DPCD macros ordered by address, and make indentation conform to
the rest of the file.
commit e045d20bef
Author: Sonika Jindal <sonika.jindal@intel.com>
Date: Thu Feb 19 13:16:44 2015 +0530
drm: Adding edp1.4 specific dpcd macros
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/NacAAoJEHm+PkMAQRiGdUcIAJU5dHclwd9HRc7LX5iOwYN6
mN0aCsYjMD8Pjx2VcPCgJvkIoESQO5pkwYpFFWCwILup1bVEidqXfr8EPOdThzdh
kcaT0FwUvd19K+0jcKVNCX1RjKBtlUfUKONk6sS2x4RrYZpv0Ur8Gh+yXV8iMWtf
fAusNEYlxQJvEz5+NSKw86EZTr4VVcykKLNvj+/t/JrXEuue7IG8EyoAO/nLmNd2
V/TUKKttqpE6aUVBiBDmcMQl2SUVAfp5e+KJAHmizdDpSE80nU59UC1uyV8VCYdM
qwHXgttLhhKr8jBPOkvUxl4aSXW7S0QWO8TrMpNdEOeB3ZB8AKsiIuhe1JrK0ro=
=Xkue
-----END PGP SIGNATURE-----
Merge tag 'v4.0-rc3' into drm-next
Linux 4.0-rc3 backmerge to fix two i915 conflicts, and get
some mainline bug fixes needed for my testing box
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/intel_display.c
- Y tiling support for scanout from Tvrtko&Damien
- Remove more UMS support
- some small prep patches for OLR removal from John Harrison
- first few patches for dynamic pagetable allocation from Ben Widawsky, rebased
by tons of other people
- DRRS support patches (Sonika&Vandana)
- fbc patches from Paulo
- make sure our vblank callbacks aren't called when the pipes are off
- various patches all over
* tag 'drm-intel-next-2015-02-27' of git://anongit.freedesktop.org/drm-intel: (61 commits)
drm/i915: Update DRIVER_DATE to 20150227
drm/i915: Clarify obj->map_and_fenceable
drm/i915/skl: Allow Y (and Yf) frame buffer creation
drm/i915/skl: Update watermarks for Y tiling
drm/i915/skl: Updated watermark programming
drm/i915/skl: Adjust get_plane_config() to support Yb/Yf tiling
drm/i915/skl: Teach pin_and_fence_fb_obj() about Y tiling constraints
drm/i915/skl: Adjust intel_fb_align_height() for Yb/Yf tiling
drm/i915/skl: Allow scanning out Y and Yf fbs
drm/i915/skl: Add new displayable tiling formats
drm/i915: Remove DRIVER_MODESET checks from modeset code
drm/i915: Remove regfile code&data for UMS suspend/resume
drm/i915: Remove DRIVER_MODESET checks from gem code
drm/i915: Remove DRIVER_MODESET checks in the gpu reset code
drm/i915: Remove DRIVER_MODESET checks from suspend/resume code
drm/i915: Remove DRIVER_MODESET checks in load/unload/close code
drm/i915: fix a printk format
drm/i915: Add media rc6 residency file to sysfs
drm/i915: Add missing description to parameter in alloc_pt_range
drm/i915: Removed the read of RP_STATE_CAP from sysfs/debugfs functions
...
Use cases like rotation require these hooks to have some context so they
know how to prepare and cleanup the frame buffer correctly.
For i915 specifically, object backing pages need to be mapped differently
for different rotation modes and the driver needs to know which mapping to
instantiate and which to tear down when transitioning between them.
v2: Made passed in states const. (Daniel Vetter)
[airlied: add mdp5 and atmel fixups]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- use the atomic helpers for plane_upate/disable hooks (Matt Roper)
- refactor the initial plane config code (Damien)
- ppgtt prep patches for dynamic pagetable alloc (Ben Widawsky, reworked and
rebased by a lot of other people)
- framebuffer modifier support from Tvrtko Ursulin, drm core code from Rob Clark
- piles of workaround patches for skl from Damien and Nick Hoath
- vGPU support for xengt on the client side (Yu Zhang)
- and the usual smaller things all over
* tag 'drm-intel-next-2015-02-14' of git://anongit.freedesktop.org/drm-intel: (88 commits)
drm/i915: Update DRIVER_DATE to 20150214
drm/i915: Remove references to previously removed UMS config option
drm/i915/skl: Use a LRI for WaDisableDgMirrorFixInHalfSliceChicken5
drm/i915/skl: Fix always true comparison in a revision id check
drm/i915/skl: Implement WaEnableLbsSlaRetryTimerDecrement
drm/i915/skl: Implement WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
drm/i915: Add process identifier to requests
drm/i915/skl: Implement WaBarrierPerformanceFixDisable
drm/i915/skl: Implement WaCcsTlbPrefetchDisable:skl
drm/i915/skl: Implement WaDisableChickenBitTSGBarrierAckForFFSliceCS
drm/i915/skl: Implement WaDisableHDCInvalidation
drm/i915/skl: Implement WaDisableLSQCROPERFforOCL
drm/i915/skl: Implement WaDisablePartialResolveInVc
drm/i915/skl: Introduce a SKL specific init_workarounds()
drm/i915/skl: Document that we implement WaRsClearFWBitsAtReset
drm/i915/skl: Implement WaSetGAPSunitClckGateDisable
drm/i915/skl: Make the init clock gating function skylake specific
drm/i915/skl: Provide a gen9 specific init_render_ring()
drm/i915/skl: Document the WM read latency W/A with its name
drm/i915/skl: Also detect eDRAM on SKL
...
We need to store device offsets in 64 bit as the device
address space may be larger than the CPU's.
Fixes GPU init failures on radeons with 4GB or more of
vram on 32 bit kernels. We put vram at the start of the
GPU's address space so the gart aperture starts at 4 GB
causing all GPU addresses in the gart aperture to get
truncated.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=89072
[airlied: fix warning on nouveau build]
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: thellstrom@vmware.com
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The current implementation is limited by the number of addresses that
fit into an unsigned long. This causes problems on 32-bit Tegra where
unsigned long is 32-bit but drm_mm is used to manage an IOVA space of
4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1
(or 4 GiB - 4 KiB for page granularity).
This commit changes the start and size of the range to be an unsigned
64-bit integer, thus allowing much larger ranges to be supported.
[airlied: fix i915 warnings and coloring callback]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
fixupo
Adding dpcd macros related to edp1.4 and link rates
v2: Added DP_SUPPORTED_LINK_RATES macros
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With runtime PM the hw might still be off while doing the ->mode_set
callbacks - runtime PM get/put should only happen in the
enable/disable hooks to properly support DPMS. Which essentially makes
these callbacks useless for drivers support runtime PM, so make them
optional. Again motivated by discussions with Laurent.
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
These names only make sense because of backwards compatability with
the order used by the crtc helper library. There's not really any real
requirement in the ordering here.
So rename them to something more descriptive and update the kerneldoc
a bit. Motivated in a discussion with Laurent about how to restore
plane state for dpms for drivers with runtime pm.
v2: Squash in fixup from Stephen Rothwell to fix a conflict with
tegra.
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Atomic state handling adds a lot of indirection and complexity between
simple updates and drivers. For easier debugging the diagnostic output
is therefore rather chatty. Which is great for tracking down atomic
issues, but really annoying otherwise.
Add a new DRM_DEBUG_ATOMIC to be able to filter this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The CRTC_STEREO_DOUBLE_ONLY define was introduced in commit:
commit ecb7e16bf1
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Mon Dec 1 15:40:09 2014 -0800
drm: add helper to get crtc timings (v5)
but if we want the stereo h/v adjustments, we need to set the
CRTC_STEREO_DOUBLE flag. Otherwise, we'll get the wrong h/v for frame packing
stereo 3d modes.
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
At driver load we need to tell the vblank code about the state of the
pipes, so that the logic around reject vblank_get when the pipe is off
works correctly.
Thus far i915 used drm_vblank_off, but one of the side-effects of it
is that it also saves the vblank counter. And for that it calls down
into the ->get_vblank_counter hook. Which isn't really a good idea
when the pipe is off for a few reasons:
- With runtime pm the register might not respond.
- If the pipe is off some datastructures might not be around or
unitialized.
The later is what blew up on gen3: We look at intel_crtc->config to
compute the vblank counter, and for a disabled pipe at boot-up that's
just not there. Thus far this was papered over by a check for
intel_crtc->active, but I want to get rid of that (since it's fairly
race, vblank hooks are called from all kinds of places).
So prep for that by adding a _reset functions which only does what we
really need to be done at driver load: Mark the vblank pipe as off,
but don't do any vblank counter saving or event flushing - neither of
that is required.
v2: Clarify the code flow slightly as suggested by Ville.
v3: Fix kerneldoc spelling, spotted by Laurent.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v2)
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
When reviewing patch that fixes VGA on BDW Halo Jani noticed that
we also had other ULT IDs that weren't listed there.
So this follow-up patch add these pci-ids as halo and fix comments
on i915_pciids.h
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In DRM/KMS we are lacking a good way to deal with tiled/compressed
formats. Especially in the case of dmabuf/prime buffer sharing, where
we cannot always rely on under-the-hood flags passed to driver specific
gem-create ioctl to pass around these extra flags.
The proposal is to add a per-plane format modifier. This allows to, if
necessary, use different tiling patters for sub-sampled planes, etc.
The format modifiers are added at the end of the ioctl struct, so for
legacy userspace it will be zero padded.
v1: original
v1.5: increase modifier to 64b
v2: Incorporate review comments from the big thread, plus a few more.
- Add a getcap so that userspace doesn't have to jump through hoops.
- Allow modifiers only when a flag is set. That way drivers know when
they're dealing with old userspace and need to fish out e.g. tiling
from other information.
- After rolling out checks for ->modifier to all drivers I've decided
that this is way too fragile and needs an explicit opt-in flag. So
do that instead.
- Add a define (just for documentation really) for the "NONE"
modifier. Imo we don't need to add mask #defines since drivers
really should only do exact matches against values defined with
fourcc_mod_code.
- Drop the Samsung tiling modifier on Rob's request since he's not yet
sure whether that one is accurate.
v3:
- Also add a new ->modifier[] array to struct drm_framebuffer and fill
it in drm_helper_mode_fill_fb_struct. Requested by Tvrkto Uruslin.
- Remove TODO in comment and add code comment that modifiers should be
properly documented, requested by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Rob Clark <robdclark@gmail.com> (v1.5)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We need to have a separate GT3 struct intel_device_info to declare they
have a second VCS. Let's start by splitting the PCI ids per-GT.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We had _power_up(), but drivers also need to be able to power down.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Currently, third party bridge drivers(ptn3460) are dependent
on the corresponding encoder driver init, since bridge driver
needs a drm_device pointer to finish drm initializations.
The encoder driver passes the drm_device pointer to the
bridge driver. Because of this dependency, third party drivers
like ptn3460 doesn't adhere to the driver model.
In this patch, we reframe the bridge registration framework
so that bridge initialization is split into 2 steps, and
bridge registration happens independent of drm flow:
--Step 1: gather all the bridge settings independent of drm and
add the bridge onto a global list of bridges.
--Step 2: when the encoder driver is probed, call drm_bridge_attach
for the corresponding bridge so that the bridge receives
drm_device pointer and continues with connector and other
drm initializations.
The old set of bridge helpers are removed, and a set of new helpers
are added to accomplish the 2 step initialization.
The bridge devices register themselves onto global list of bridges
when they get probed by calling "drm_bridge_add".
The parent encoder driver waits till the bridge is available
in the lookup table(by calling "of_drm_find_bridge") and then
continues with its initialization.
The encoder driver should also call "drm_bridge_attach" to pass
on the drm_device to the bridge object.
drm_bridge_attach inturn calls "bridge->funcs->attach" so that
bridge can continue with drm related initializations.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Assign the pointer to bridge ops structure(drm_bridge_funcs) in
the bridge driver itself, instead of passing it to drm_bridge_init.
This will allow bridge driver developer to pack bridge private
information inside the bridge object and pass only the drm-relevant
information to drm_bridge_init.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The biggest part of these changes is the conversion to atomic mode-
setting. A lot of cleanup and demidlayering was required before the
conversion, with the result being a whole lot of changes.
Besides the atomic mode-setting support, the host1x bus now has the
proper infrastructure to support suspend/resume for child devices.
Finally, a couple of smaller cleanup patches round things off.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=k0/3
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.20-rc1
The biggest part of these changes is the conversion to atomic mode-
setting. A lot of cleanup and demidlayering was required before the
conversion, with the result being a whole lot of changes.
Besides the atomic mode-setting support, the host1x bus now has the
proper infrastructure to support suspend/resume for child devices.
Finally, a couple of smaller cleanup patches round things off.
* tag 'drm/tegra/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (54 commits)
drm/tegra: Use correct relocation target offsets
drm/tegra: Add minimal power management
drm/tegra: dc: Unify enabling the display controller
drm/tegra: Track tiling and format in plane state
drm/tegra: Track active planes in CRTC state
drm/tegra: Remove unused ->mode_fixup() callbacks
drm/tegra: Atomic conversion, phase 3, step 3
drm/tegra: Atomic conversion, phase 3, step 2
drm/tegra: dc: Use atomic clock state in modeset
drm/tegra: sor: Implement ->atomic_check()
drm/tegra: hdmi: Implement ->atomic_check()
drm/tegra: dsi: Implement ->atomic_check()
drm/tegra: rgb: Implement ->atomic_check()
drm/tegra: dc: Store clock setup in atomic state
drm/tegra: Atomic conversion, phase 3, step 1
drm/tegra: Atomic conversion, phase 2
drm/tegra: Atomic conversion, phase 1
drm/tegra: dc: Do not needlessly deassert reset
drm/tegra: Output cleanup functions cannot fail
drm/tegra: Remove remnants of the output midlayer
...
This callback can be used instead of the legacy ->mode_fixup() and is
passed the CRTC and connector states. It can thus use these states to
validate the modeset and cache values in the state to be used during
the actual modeset.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to prevent drivers from having to perform the same checks over
and over again, add an optional ->atomic_disable callback which the core
calls under the right circumstances.
v2: pass old state and detect edges to avoid calling ->atomic_disable on
already disabled planes, remove redundant comment (Daniel Vetter)
v3: rename helper to drm_atomic_plane_disabling() to clarify that it is
checking for transitions, move helper to drm_atomic_helper.h, clarify
check for !old_state and its relation to transitional helpers
Here's an extract from some discussion rationalizing the behaviour (for
a full version, see the reference below):
> > Hm, thinking about this some more this will result in a slight difference
> > in behaviour, at least when drivers just use the helper ->reset functions
> > but don't disable everything:
> > - With transitional helpers we assume we know nothing and call
> > ->atomic_disable.
> > - With atomic old_state->crtc == NULL in the same situation right after
> > boot-up, but we asssume the plane is really off and _dont_ call
> > ->atomic_disable.
> >
> > Should we instead check for (old_state && old_state->crtc) and state that
> > drivers need to make sure they don't have stuff hanging around?
>
> I don't think we can check for old_state because otherwise this will
> always return false, whereas we really want it to force-disable planes
> that could be on (lacking any more accurate information). For
> transitional helpers anyway.
>
> For the atomic helpers, old_state will never be NULL, but I'd assume
> that the driver would reconstruct the current state in ->reset().
By the way, the reason for why old_state can be NULL with transitional
helpers is the ordering of the steps in the atomic transition. Currently
the Tegra patches do this (based on your blog post and the Exynos proto-
type):
1) atomic conversion, phase 1:
- implement ->atomic_{check,update,disable}()
- use drm_plane_helper_{update,disable}()
2) atomic conversion, phase 2:
- call drm_mode_config_reset() from ->load()
- implement ->reset()
That's only a partial list of what's done in these steps, but that's the
only relevant pieces for why old_state is NULL.
What happens is that without ->reset() implemented there won't be any
initial state, hence plane->state (the old_state here) will be NULL the
first time atomic state is applied.
We could of course reorder the sequence such that drivers are required
to hook up ->reset() before they can (or at the same as they) hook up
the transitional helpers. We could add an appropriate WARN_ON to this
helper to make that more obvious.
However, that will not solve the problem because it only gets rid of the
special case. We still don't know whether old_state->crtc == NULL is the
current state or just the initial default.
So no matter which way we do this, I don't see a way to get away without
requiring specific semantics from drivers. They would be that:
- drivers recreate the correct state in ->reset() so that
old_state->crtc != NULL if the plane is really enabled
or
- drivers have to ensure that the real state in fact mirrors the
initial default as encoded in the state (plane disabled)
References: http://lists.freedesktop.org/archives/dri-devel/2015-January/075578.html
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is no use-case where it would be useful for drivers not to
implement this function and the transitional plane helpers already
require drivers to provide an implementation.
v2: add new requirement to kerneldoc
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For historical reasons going all the way back to how the Xrandr code
was implemented the semantics of the callbacks used to enable/disable
crtcs and encoders are ... interesting.
But with atomic helpers all that complexity has been binned, with only
a well-defined on/off action left. Unfortunately the names stuck.
Let's fix that by adding enable/disable hooks every, make them the
preferred variant for atomic and update documentations.
Later on we add debug warnings when drivers have deprecated hooks. But
while everything is in-flight with lots of drivers converting to
atomic that's a bit too much - better wait for things to settle a bit
first.
v2: Fix kerneldoc, reported by Wu Fengguang.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cursor plane updates have historically been fully async and mutliple
updates batched together for the next vsync. And userspace relies upon
that. Since implementing a full queue of async atomic updates is a bit
of work lets just recover the cursor specific behaviour with a hint
flag and some hacks to drop the vblank wait.
v2: Fix kerneldoc, reported by Wu Fengguang.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This builds on top of the crtc->active infrastructure to implement
legacy DPMS. My choice of semantics is somewhat arbitrary, but the
entire pipe is enabled as along as one output is still enabled.
Of course it also clamps everything that's not ON to OFF.
v2: Fix spelling in one comment.
v3: Don't do an async commit (Thierry)
v4: Dan Carpenter noticed missing error case handling.
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This is the infrastructure for DPMS ported to the atomic world.
Fundamental changes compare to legacy DPMS are:
- No more per-connector dpms state, instead there's just one per each
display pipeline. So if you clone either you have to unclone first
if you only want to switch off one screen, or you just switch of
everything (like all desktops do). This massively reduces complexity
for cloning since now there's no more half-enabled cloned configs to
consider.
- Only on/off, dpms standby/suspend are as dead as real CRTs. Again
reduces complexity a lot.
Now especially for backwards compat the really important part for dpms
support is that dpms on always succeeds (except for hw death and
unplugged cables ofc). Which means everything that could fail (like
configuration checking, resources assignments and buffer management)
must be done irrespective from ->active. ->active is really only a
toggle to change the hardware state. More precisely:
- Drivers MUST NOT look at ->active in their ->atomic_check callbacks.
Changes to ->active MUST always suceed if nothing else changes.
- Drivers using the atomic helpers MUST NOT look at ->active anywhere,
period. The helpers will take care of calling the respective
enable/modeset/disable hooks as necessary. As before the helpers
will carefully keep track of the state and not call any hooks
unecessarily, so still no double-disables or enables like with crtc
helpers.
- ->mode_set hooks are only called when the mode or output
configuration changes, not for changes in ->active state.
- Drivers which reconstruct the state objects in their ->reset hooks
or through some other hw state readout infrastructure must ensure
that ->active reflects actual hw state.
This just implements the core bits and helper logic, a subsequent
patch will implement the helper code to implement legacy dpms with
this.
v2: Rebase on top of the drm ioctl work:
- Move crtc checks to the core check function.
- Also check for ->active_changed when deciding whether a modeset
might happen (for the ALLOW_MODESET mode).
- Expose the ->active state with an atomic prop.
v3: Review from Rob
- Spelling fix in comment.
- Extract needs_modeset helper to consolidate the ->mode_changed ||
->active_changed checks.
v4: Fixup fumble between crtc->state and crtc_state.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Not a new type exposed to userspace, just a standard way to create
them since between range, bitmask and enum there's 3 different ways to
pull out a boolean prop.
Also add the kerneldoc for the recently added new prop types, which
Rob forgot all about.
v2: Fixup kerneldoc, spotted by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The rotation property is shared by multiple drivers, so it makes sense
to store the rotation value (for atomic-converted drivers) in the common
plane state so that core code can eventually access it as well.
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over
* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
drm/i915: Update DRIVER_DATE to 20150117
i915: reuse %ph to dump small buffers
drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
drm/i915: PSR link standby at debugfs
drm/i915: group link_standby setup and let this info visible everywhere.
drm/i915: Add missing vbt check.
drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
drm/i915: Fix kerneldoc for i915 atomic plane code
drm/i915: Don't pretend SDVO hotplug works on 915
drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
drm/i915: Make hpd arrays big enough to avoid out of bounds access
Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
drm/i915: Improve HiZ throughput on Cherryview.
drm/i915: Reset CSB read pointer in ring init
drm/i915: Drop unused position fields (v2)
drm/i915: Move to atomic plane helpers (v9)
...
Just flushing out my drm-misc branch, nothing major. Well too old patches
I've dug out from years since a patch from Rob look eerily familiar ;-)
* tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel:
drm/probe-helper: clamp unknown connector status in the poll work
drm/probe-helper: don't lose hotplug event
next: drm/atomic: Use copy_from_user to copy 64 bit data from user space
drm: Make drm_read() more robust against multithreaded races
drm/fb-helper: Propagate errors from initial config failure
drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"
There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).
To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).
Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.
v2: Review from Rob Clark
- Don't bail out of the output poll work immediately if it's disabled
to make sure we deliver the delayed hoptplug events. Instead just
jump to the tail.
- Don't scheduel the work when it's not set up. Would be a driver bug
since using probe helpers for anything dynamic without them
initialized makes them all noops.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.
v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.
This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
RGB or LVDS busses).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r9/P
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
* tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits)
imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
imx-drm: encoder prepare/mode_set must use adjusted mode
imx-drm: ipuv3-crtc: Implement mode_fixup
drm_modes: add drm_display_mode_to_videomode
gpu: ipu-di: remove some non-functional code
gpu: ipu-di: Add ipu_di_adjust_videomode()
drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver
drm: bridge/dw_hdmi: request interrupt only after initializing the mutes
drm: bridge/dw_hdmi: add rockchip rk3288 support
dt-bindings: Add documentation for rockchip dw hdmi
drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
drm: bridge/dw_hdmi: add mode_valid support
drm: bridge/dw_hdmi: add support for multi-byte register width access
dt-bindings: add document for dw_hdmi
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
drm: imx: imx-hdmi: split phy configuration to platform driver
drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
...
Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c
Separate branch so that Takashi can also pull just this refactoring
into sound-next.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
