0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-21 10:05:00 +08:00
Commit Graph

35922 Commits

Author SHA1 Message Date
Josef Bacik
9e351cc862 Btrfs: remove transaction from send
Lets try this again.  We can deadlock the box if we send on a box and try to
write onto the same fs with the app that is trying to listen to the send pipe.
This is because the writer could get stuck waiting for a transaction commit
which is being blocked by the send.  So fix this by making sure looking at the
commit roots is always going to be consistent.  We do this by keeping track of
which roots need to have their commit roots swapped during commit, and then
taking the commit_root_sem and swapping them all at once.  Then make sure we
take a read lock on the commit_root_sem in cases where we search the commit root
to make sure we're always looking at a consistent view of the commit roots.
Previously we had problems with this because we would swap a fs tree commit root
and then swap the extent tree commit root independently which would cause the
backref walking code to screw up sometimes.  With this patch we no longer
deadlock and pass all the weird send/receive corner cases.  Thanks,

Reportedy-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-04-06 17:39:30 -07:00
Josef Bacik
a26e8c9f75 Btrfs: don't clear uptodate if the eb is under IO
So I have an awful exercise script that will run snapshot, balance and
send/receive in parallel.  This sometimes would crash spectacularly and when it
came back up the fs would be completely hosed.  Turns out this is because of a
bad interaction of balance and send/receive.  Send will hold onto its entire
path for the whole send, but its blocks could get relocated out from underneath
it, and because it doesn't old tree locks theres nothing to keep this from
happening.  So it will go to read in a slot with an old transid, and we could
have re-allocated this block for something else and it could have a completely
different transid.  But because we think it is invalid we clear uptodate and
re-read in the block.  If we do this before we actually write out the new block
we could write back stale data to the fs, and boom we're screwed.

Now we definitely need to fix this disconnect between send and balance, but we
really really need to not allow ourselves to accidently read in stale data over
new data.  So make sure we check if the extent buffer is not under io before
clearing uptodate, this will kick back EIO to the caller instead of reading in
stale data and keep us from corrupting the fs.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-04-06 17:34:37 -07:00
Josef Bacik
573a075567 Btrfs: check for an extent_op on the locked ref
We could have possibly added an extent_op to the locked_ref while we dropped
locked_ref->lock, so check for this case as well and loop around.  Otherwise we
could lose flag updates which would lead to extent tree corruption.  Thanks,

cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-04-06 17:34:36 -07:00
Josef Bacik
ba8b028933 Btrfs: do not reset last_snapshot after relocation
This was done to allow NO_COW to continue to be NO_COW after relocation but it
is not right.  When relocating we will convert blocks to FULL_BACKREF that we
relocate.  We can leave some of these full backref blocks behind if they are not
cow'ed out during the relocation, like if we fail the relocation with ENOSPC and
then just drop the reloc tree.  Then when we go to cow the block again we won't
lookup the extent flags because we won't think there has been a snapshot
recently which means we will do our normal ref drop thing instead of adding back
a tree ref and dropping the shared ref.  This will cause btrfs_free_extent to
blow up because it can't find the ref we are trying to free.  This was found
with my ref verifying tool.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-04-06 17:34:35 -07:00
Linus Torvalds
2b3a8fd735 NFS client updates for Linux 3.15
Highlights include:
 
 - Stable fix for a use after free issue in the NFSv4.1 open code
 - Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
 - Optimise usage of readdirplus when confronted with 'ls -l' situations
 - Soft mount bugfixes
 - NFS over RDMA bugfixes
 - NFSv4 close locking fixes
 - Various NFSv4.x client state management optimisations
 - Rename/unlink code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTQBayAAoJEGcL54qWCgDyUzgQAKzSlbcksMQT55M/KZJXabNW
 KSctJeDrkTkRxOXTNxuF9NbIgeqenLijCokXty6BIUgup0zkOPMzFfRfgdQvplnp
 YEj4sOEXEZ8CX+PoUTYOEayzt0ssEAOyidumiM+Gx2LD/E1d2xyCL7YaAOjIhVQS
 OnXcX1cZw+dZSUxC9vu5fVDjrphJTnp4CXdbvR5PiJiXeKqzZd9e5M3hXgpAQ/AS
 mWjYeUvM9mwyz7UmbLKkWEmzB3tFlGdTzDPxLRrkfcOSKI2Ham0lL3/Uv50/nRTu
 99ts6KH8KLGcUuL9vD9KRebht2f71usBrWAdvpy1cUcf1Fh6lmEg4ktGfkqldaUu
 9kNu9d5DCxJoGc6R2UTw5FeyPwYuDWoBwEGy1DcguJ5CeQn2R2nH4ps/P3J3DX4d
 DZsJqCY9idKZCQhtyR0iF9j3x2bNFoENaL6WHI6b0J+xjMedIbHgeUQzIQP0RLBJ
 h0IcjK0D+e7WdyC7jk4Nm3krtms5SNUG5/N9OUO36a7v8735PJBcbcgm9hZJt8Fh
 t/4vqUmKIBXHioHsMhaFslqTWlYIR9a3MYmN7QtHFYbqUfNxH69v9y3d6jb4Igck
 kqoEiui5aJOCR76s7oVdHCcm+klBwEPiACT+H9CUMzSoKzHSWsBSNZbJR3BEia4M
 7dwScS1OfI2KuutshGQA
 =weNx
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - Stable fix for a use after free issue in the NFSv4.1 open code
   - Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
   - Optimise usage of readdirplus when confronted with 'ls -l' situations
   - Soft mount bugfixes
   - NFS over RDMA bugfixes
   - NFSv4 close locking fixes
   - Various NFSv4.x client state management optimisations
   - Rename/unlink code cleanups"

* tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
  nfs: pass string length to pr_notice message about readdir loops
  NFSv4: Fix a use-after-free problem in open()
  SUNRPC: rpc_restart_call/rpc_restart_call_prepare should clear task->tk_status
  SUNRPC: Don't let rpc_delay() clobber non-timeout errors
  SUNRPC: Ensure call_connect_status() deals correctly with SOFTCONN tasks
  SUNRPC: Ensure call_status() deals correctly with SOFTCONN tasks
  NFSv4: Ensure we respect soft mount timeouts during trunking discovery
  NFSv4: Schedule recovery if nfs40_walk_client_list() is interrupted
  NFS: advertise only supported callback netids
  SUNRPC: remove KERN_INFO from dprintk() call sites
  SUNRPC: Fix large reads on NFS/RDMA
  NFS: Clean up: revert increase in READDIR RPC buffer max size
  SUNRPC: Ensure that call_bind times out correctly
  SUNRPC: Ensure that call_connect times out correctly
  nfs: emit a fsnotify_nameremove call in sillyrename codepath
  nfs: remove synchronous rename code
  nfs: convert nfs_rename to use async_rename infrastructure
  nfs: make nfs_async_rename non-static
  nfs: abstract out code needed to complete a sillyrename
  NFSv4: Clear the open state flags if the new stateid does not match
  ...
2014-04-06 10:09:38 -07:00
Linus Torvalds
6f4c98e1c2 Nothing major: the stricter permissions checking for sysfs broke
a staging driver; fix included.  Greg KH said he'd take the patch
 but hadn't as the merge window opened, so it's included here
 to avoid breaking build.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQMH9AAoJENkgDmzRrbjxo4UP/jwlenP44v+RFpo/dn8Z8E2n
 SREQscU5ZZKvuyFD6kUdvOz8YC/nTrJvXoVkMUF05GVbuvb8/8UPtT9ECVemd0rW
 xNy4aFfv9rbrqRLBLpLK9LAgTuhwlbTgGxgL78zRn3hWmf1hBZWCY+cEvKM8l/+9
 oEQdORL0sUpZh7iryAeGqbOrXT4gqJEvSLOFwiYTSo6ryzWIilmdXSUAh6s8MIEX
 PR1+oH9J8B6J29lcXKMf8/sDI1EBUeSLdBmMCuN5Y7xpYxsQLroVx94kPbdBY+XK
 ZRoYuUGSUJfGRZY46cFKApIGeF07z1DGoyXghbSWEQrI+23TMUmrKUg47LSukE4Y
 yCUf8HAtqIA3gVc9GKDdSp/2UpkAhTTv5ogKgnIzs1InWtOIBdDRSVUQXDosFEXw
 6ZZe1pQs2zfXyXxO4j0Wq36K4RgI0aqOVw+dcC+w5BidjVylgnYRV0PSDd72tid7
 bIfnjDbUBo+o4LanPNGYK474KyO7AslgTE50w6zwbJzgdwCQ36hCpKqScBZzm60a
 42LrgTVoIHHWAL1tDzWL/LzWflZGdJAezzNje0/f2Q3bGMiNHWoljAvUphkTZ7qt
 E8+jWqmM+riH3e8Y5wKpO1BKt7NGHISEy//bUlnqTwisjIzVILZ6VjfugQ1AI+0x
 llTXPBotFvfvXqxunBg7
 =yzUO
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Nothing major: the stricter permissions checking for sysfs broke a
  staging driver; fix included.  Greg KH said he'd take the patch but
  hadn't as the merge window opened, so it's included here to avoid
  breaking build"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  staging: fix up speakup kobject mode
  Use 'E' instead of 'X' for unsigned module taint flag.
  VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.
  kallsyms: fix percpu vars on x86-64 with relocation.
  kallsyms: generalize address range checking
  module: LLVMLinux: Remove unused function warning from __param_check macro
  Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
  module: remove MODULE_GENERIC_TABLE
  module: allow multiple calls to MODULE_DEVICE_TABLE() per module
  module: use pr_cont
2014-04-06 09:38:07 -07:00
Yan, Zheng
a30be7cb2c ceph: skip invalid dentry during dcache readdir
skip dentries that were added before MDS issued FILE_SHARED to
client.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-06 09:13:14 -07:00
Jeff Layton
9581a4ae75 nfs: pass string length to pr_notice message about readdir loops
There is no guarantee that the strings in the nfs_cache_array will be
NULL-terminated. In the event that we end up hitting a readdir loop, we
need to ensure that we pass the warning message the length of the
string.

Reported-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-04-05 09:25:42 -04:00
Yan, Zheng
a56371d9d9 ceph: flush cap release queue when trimming session caps
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:08:26 -07:00
Yan, Zheng
4819301287 ceph: don't grabs open file reference for aborted request
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:08:25 -07:00
Yan, Zheng
ab866549b3 ceph: drop extra open file reference in ceph_atomic_open()
ceph_atomic_open() calls ceph_open() after receiving the MDS reply.
ceph_open() grabs an extra open file reference. (The open request
already holds an open file reference)

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:08:23 -07:00
Yan, Zheng
54008399dc ceph: preallocate buffer for readdir reply
Preallocate buffer for readdir reply. Limit number of entries in
readdir reply according to the buffer size.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:08:22 -07:00
Yan, Zheng
cc48c3e85f ceph: don't include ceph.{file,dir}.layout vxattr in listxattr()
This avoids 'cp -a' modifying layout of new files/directories.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:07:21 -07:00
Yan, Zheng
1e5c6649ff ceph: check buffer size in ceph_vxattrcb_layout()
If buffer size is zero, return the size of layout vxattr. If buffer
size is not zero, check if it is large enough for layout vxattr.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:07:19 -07:00
Yan, Zheng
00bd8edb86 ceph: fix null pointer dereference in discard_cap_releases()
send_mds_reconnect() may call discard_cap_releases() after all
release messages have been dropped by cleanup_cap_releases()

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-04 21:07:17 -07:00
Fabian Frederick
5f75ce5781 ceph: Remove get/set acl on symlinks
Remove unsupported symlink operations.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-04-04 21:07:14 -07:00
Yan, Zheng
d9ffc4f770 ceph: set mds_wanted when MDS reply changes a cap to auth cap
When adjusting caps client wants, MDS does not record caps that are
not allowed. For non-auth MDS, it does not record WR caps. So when
a MDS reply changes a non-auth cap to auth cap, client needs to set
cap's mds_wanted according to the reply.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:07:12 -07:00
Yan, Zheng
eb13e832f8 ceph: use fl->fl_file as owner identifier of flock and posix lock
flock and posix lock should use fl->fl_file instead of process ID
as owner identifier. (posix lock uses fl->fl_owner. fl->fl_owner
is usually equal to fl->fl_file, but it also can be a customized
value). The process ID of who holds the lock is just for F_GETLK
fcntl(2).

The fix is rename the 'pid' fields of struct ceph_mds_request_args
and struct ceph_filelock to 'owner', rename 'pid_namespace' fields
to 'pid'. Assign fl->fl_file to the 'owner' field of lock messages.
We also set the most significant bit of the 'owner' field. MDS can
use that bit to distinguish between old and new clients.

The MDS counterpart of this patch modifies the flock code to not
take the 'pid_namespace' into consideration when checking conflict
locks.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-04 21:07:11 -07:00
Yan, Zheng
eb70c0ce4e ceph: forbid mandatory file lock
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:07:09 -07:00
Yan, Zheng
0e8e95d6d7 ceph: use fl->fl_type to decide flock operation
VFS does not directly pass flock's operation code to filesystem's
flock callback. It translates the operation code to the form how
posix lock's parameters are presented.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:07:08 -07:00
Yan, Zheng
8c93cd610c ceph: update i_max_size even if inode version does not change
handle following sequence of events:
 - client releases a inode with i_max_size > 0. The release message
   is queued. (is not sent to the auth MDS)
 - a 'lookup' request reply from non-auth MDS returns the same inode.
 - client opens the inode in write mode. The version of inode trace
   in 'open' request reply is equal to the cached inode's version.
 - client requests new max size. The MDS ignores the request because
   it does not affect client's write range

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-04 21:07:06 -07:00
Yan, Zheng
a255060451 ceph: make sure write caps are registered with auth MDS
Only auth MDS can issue write caps to clients, so don't consider
write caps registered with non-auth MDS as valid.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-04 21:07:05 -07:00
Linus Torvalds
d15e03104e xfs: update for 3.15-rc1
The main changes in the XFS tree for 3.15-rc1 are:
 
         - O_TMPFILE support
         - allowing AIO+DIO writes beyond EOF
         - FALLOC_FL_COLLAPSE_RANGE support for fallocate syscall and XFS
           implementation
         - FALLOC_FL_ZERO_RANGE support for fallocate syscall and XFS
           implementation
         - IO verifier cleanup and rework
         - stack usage reduction changes
         - vm_map_ram NOIO context fixes to remove lockdep warings
         - various bug fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJTPykMAAoJEK3oKUf0dfod/KoP/jKQwzQPdtT8EtAu5vENh9AO
 55zwCDXXFjCNIGIFPkrUBQbbARVAqhLZn3vuLUUhqtRRELdgJy/yFKZ37MPd8bhU
 dKetivEB192Jcd6Sn74vsOsNLm1u9mJqbQ1aothz0TiOrkkWFZlz4Otu36MZRHN3
 9WgZXWSxr6I/hYHGyCorJWZ5ISs0XD3vR5dYXYeZChbTpTxlCT4X/YgUtW4WH/Tq
 y4gG0fKfwr9KK07/LXuQgUuZGU8vwVuNNsXPhqh+FZ39SLD2Ea83h46Hzf/+vVNI
 kCIyYN1y40uBWczmwAptVEnUwhpGK8PzNrhKwTZICDtuct9sikf7c+o0aEE9lcqo
 8IBt0Dy4l7BQVFSZOjYo5Jw5a8jAbkh47zru31HxogEVqafdz80iWB12JagOOnXM
 v/McvDvZMyfgGckih32FM4G7ElvTYgGai5/3dLhfMuhc4/DdwcBOF1yHmFmnjhWO
 QRsQxLdefUtP3MfMYKaJHM6v2wE1S2l0owgp+HdPluNiOUmH/fqFq1WpHxqqeRPz
 nuHF8oYlxaZP5WAarz6Yf1/twIeZJ1rTD8np8uocvMqQJzMYJgrQyH+xJqjJaITR
 iveQcEoRB8D7/fXMGDdcjZYE2fG4l4JE2kuh97k5NZw76e3v2YXSGh0kd9WqR1uN
 t07joLRQKR2pJuSmuD5E
 =uSkJ
 -----END PGP SIGNATURE-----

Merge tag 'xfs-for-linus-3.15-rc1' of git://oss.sgi.com/xfs/xfs

Pull xfs update from Dave Chinner:
 "There are a couple of new fallocate features in this request - it was
  decided that it was easiest to push them through the XFS tree using
  topic branches and have the ext4 support be based on those branches.
  Hence you may see some overlap with the ext4 tree merge depending on
  how they including those topic branches into their tree.  Other than
  that, there is O_TMPFILE support, some cleanups and bug fixes.

  The main changes in the XFS tree for 3.15-rc1 are:

   - O_TMPFILE support
   - allowing AIO+DIO writes beyond EOF
   - FALLOC_FL_COLLAPSE_RANGE support for fallocate syscall and XFS
     implementation
   - FALLOC_FL_ZERO_RANGE support for fallocate syscall and XFS
     implementation
   - IO verifier cleanup and rework
   - stack usage reduction changes
   - vm_map_ram NOIO context fixes to remove lockdep warings
   - various bug fixes and cleanups"

* tag 'xfs-for-linus-3.15-rc1' of git://oss.sgi.com/xfs/xfs: (34 commits)
  xfs: fix directory hash ordering bug
  xfs: extra semi-colon breaks a condition
  xfs: Add support for FALLOC_FL_ZERO_RANGE
  fs: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  xfs: inode log reservations are still too small
  xfs: xfs_check_page_type buffer checks need help
  xfs: avoid AGI/AGF deadlock scenario for inode chunk allocation
  xfs: use NOIO contexts for vm_map_ram
  xfs: don't leak EFSBADCRC to userspace
  xfs: fix directory inode iolock lockdep false positive
  xfs: allocate xfs_da_args to reduce stack footprint
  xfs: always do log forces via the workqueue
  xfs: modify verifiers to differentiate CRC from other errors
  xfs: print useful caller information in xfs_error_report
  xfs: add xfs_verifier_error()
  xfs: add helper for updating checksums on xfs_bufs
  xfs: add helper for verifying checksums on xfs_bufs
  xfs: Use defines for CRC offsets in all cases
  xfs: skip pointless CRC updates after verifier failures
  xfs: Add support FALLOC_FL_COLLAPSE_RANGE for fallocate
  ...
2014-04-04 15:50:08 -07:00
Linus Torvalds
24e7ea3bea Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
 in the jbd2 layer and in xattr handling when the extended attributes
 spill over into an external block.
 
 Other than that, the usual clean ups and minor bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTPbD2AAoJENNvdpvBGATwDmUQANSfGYIQazB8XKKgtNTMiG/Y
 Ky7n1JzN9lTX/6nMsqQnbfCweLRmxqpWUBuyKDRHUi8IG0/voXSTFsAOOgz0R15A
 ERRRWkVvHixLpohuL/iBdEMFHwNZYPGr3jkm0EIgzhtXNgk5DNmiuMwvHmCY27kI
 kdNZIw9fip/WRNoFLDBGnLGC37aanoHhCIbVlySy5o9LN1pkC8BgXAYV0Rk19SVd
 bWCudSJEirFEqWS5H8vsBAEm/ioxTjwnNL8tX8qms6orZ6h8yMLFkHoIGWPw3Q15
 a0TSUoMyav50Yr59QaDeWx9uaPQVeK41wiYFI2rZOnyG2ts0u0YXs/nLwJqTovgs
 rzvbdl6cd3Nj++rPi97MTA7iXK96WQPjsDJoeeEgnB0d/qPyTk6mLKgftzLTNgSa
 ZmWjrB19kr6CMbebMC4L6eqJ8Fr66pCT8c/iue8wc4MUHi7FwHKH64fqWvzp2YT/
 +165dqqo2JnUv7tIp6sUi1geun+bmDHLZFXgFa7fNYFtcU3I+uY1mRr3eMVAJndA
 2d6ASe/KhQbpVnjKJdQ8/b833ZS3p+zkgVPrd68bBr3t7gUmX91wk+p1ct6rUPLr
 700F+q/pQWL8ap0pU9Ht/h3gEJIfmRzTwxlOeYyOwDseqKuS87PSB3BzV3dDunSU
 DrPKlXwIgva7zq5/S0Vr
 =4s1Z
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...
2014-04-04 15:39:39 -07:00
Linus Torvalds
8e343c8b5c Series of small bug fixes for pstore.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTO0ytAAoJEKurIx+X31iBRlMP/33oGKncx/iQOi8MqNOvOzXG
 o6y6jVXosn/0sbiSnqcDtne/VstVP4RbmLpwm22tSD5QALGVubdhK+ryJ9PGC7gZ
 2wXUP75UN3BXTqzCSE3vXchQnNJooT2EjX16sZ/PvR4lO1QrWKlozuWvTR9Qhbdb
 czWh/pWrlckhgl1CR01haAdlmFo3M2/6CvkpBW7hDiY8yvBl9g0MrFPHLQH6Y15p
 kAIXQSYYVctT0xhOiMSodl6K0hpH4iRi8t2c5jUfRL6M56Ggfw1h7tVgc25ZU5NO
 /aG7k3MtKosxd7yk+Nz2bArOki22w+jXFSP45hjnZwOP096m4z6jBRawjb9/nNla
 WNfrRCTnBn8caBAasz+b3obAuX25w2YW86ITq+G54541llQCmj07KXBx8Z6TC0bI
 MVFG9wFbCghd0dal4DWkQ+tOLyZFVWWwChNnZahiPONzSqSMMR+Xr6dNNwMjPMm/
 HSM+PNUxvgLRuVvn3zLKaJp+2WugVxqBFyRdMeKRPsqzBqZ9HSkPfqkAuZg/7CZa
 Yq1HBMR8ctWGbpTdxMZ1WEh2FTfuL8l/hr+Ns3Efe7+G2muXmCP2x1TvPOF2djlK
 f7udwp62ZR6D5SZvWW9nUBZTmgCJ264ypk3hS4f4Sbu42bvttyHkYPKMDuGFioYR
 PUXMWhcQoyB4PGh09NMr
 =zOOz
 -----END PGP SIGNATURE-----

Merge tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux

Pull pstore fixes from Tony Luck:
 "Series of small bug fixes for pstore"

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: Fix memory leak when decompress using big_oops_buf
  pstore: Fix buffer overflow while write offset equal to buffer size
  pstore: Correct the max_dump_cnt clearing of ramoops
  pstore: Fix NULL pointer fault if get NULL prz in ramoops_get_next_prz
  pstore: skip zero size persistent ram buffer in traverse
  pstore: clarify clearing of _read_cnt in ramoops_context
2014-04-04 15:37:43 -07:00
Linus Torvalds
d15fee814d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
 "This series adds cached writeback support to fuse, improving write
  throughput"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix "uninitialized variable" warning
  fuse: Turn writeback cache on
  fuse: Fix O_DIRECT operations vs cached writeback misorder
  fuse: fuse_flush() should wait on writeback
  fuse: Implement write_begin/write_end callbacks
  fuse: restructure fuse_readpage()
  fuse: Flush files on wb close
  fuse: Trust kernel i_mtime only
  fuse: Trust kernel i_size only
  fuse: Connection bit for enabling writeback
  fuse: Prepare to handle short reads
  fuse: Linking file to inode helper
2014-04-04 15:34:27 -07:00
Linus Torvalds
56c225fe39 dlm for 3.15
This set includes a couple trivial cleanups and changes recovery
 log messages from DEBUG to INFO.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJTPCtSAAoJEDgbc8f8gGmqn3IQALyqRO6spT5fGgPHktLo5lZx
 Qp6uFn1dHwPncQbdCOQPsFNBnCKE76+lfY09NjABCYnJdEyZFye1MwwYDyqQjqEt
 6kUi8LLrkF39KUkOPivV19fUfwNVMoNwAIUKzTSo8wuWE/1+0NL+FIxCUd3rGqxv
 A5yg1nXGTIBPNvZArq8bi49tfriCu167/QXLPlVWIRkyJ69H5ErC+sewufSP/Z5m
 S4yDFGOLy6pu+snT0GHGZcTRAfz37YpHdpAjlxUiurEZFXGvCagF55DaZIiRhf0K
 RDXrm1rgyNQ7H1gfKa92TOijGx62nOYR9F3zlc8c4tQB+eDaWTQWGR0+lgI/PklZ
 VPMHG+lqauaEv9YwKS5UL+E3BuyiAVuwF41mue8lOSA0t+D5P4O2gB+BFuYSpUy1
 Kwt2+S38sqiPwEqRcS/n+x/qx+uaGHxtsQh6cEJw4YM5cslJukkRSx8SUqgoETNB
 uUGjD+pG1lReyUUzzjG74UKRvb7dV+psWRDb56hx2nJrZ2H24s4h7FEHaHJWKoX+
 5H4K3b+E3lqwHp4ARu/yuUYgg/PCsGTsL986135nVnvjV/cHaG4u5N8KP+a9hSyW
 PkubO7kUO34KKH45yhSh79ELsWyw4gFgy0mls2BoDpE31phGkoYbKB+hbIkbeKVQ
 EZLmwKt2aijdo3z0g4bO
 =Ljna
 -----END PGP SIGNATURE-----

Merge tag 'dlm-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm

Pull dlm updates from David Teigland:
 "This set includes a couple trivial cleanups and changes recovery log
  messages from DEBUG to INFO"

* tag 'dlm-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: use INFO for recovery messages
  fs: Include appropriate header file in dlm/ast.c
  dlm: silence a harmless use after free warning
2014-04-04 15:33:30 -07:00
Linus Torvalds
53c566625f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs changes from Chris Mason:
 "This is a pretty long stream of bug fixes and performance fixes.

  Qu Wenruo has replaced the btrfs async threads with regular kernel
  workqueues.  We'll keep an eye out for performance differences, but
  it's nice to be using more generic code for this.

  We still have some corruption fixes and other patches coming in for
  the merge window, but this batch is tested and ready to go"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (108 commits)
  Btrfs: fix a crash of clone with inline extents's split
  btrfs: fix uninit variable warning
  Btrfs: take into account total references when doing backref lookup
  Btrfs: part 2, fix incremental send's decision to delay a dir move/rename
  Btrfs: fix incremental send's decision to delay a dir move/rename
  Btrfs: remove unnecessary inode generation lookup in send
  Btrfs: fix race when updating existing ref head
  btrfs: Add trace for btrfs_workqueue alloc/destroy
  Btrfs: less fs tree lock contention when using autodefrag
  Btrfs: return EPERM when deleting a default subvolume
  Btrfs: add missing kfree in btrfs_destroy_workqueue
  Btrfs: cache extent states in defrag code path
  Btrfs: fix deadlock with nested trans handles
  Btrfs: fix possible empty list access when flushing the delalloc inodes
  Btrfs: split the global ordered extents mutex
  Btrfs: don't flush all delalloc inodes when we doesn't get s_umount lock
  Btrfs: reclaim delalloc metadata more aggressively
  Btrfs: remove unnecessary lock in may_commit_transaction()
  Btrfs: remove the unnecessary flush when preparing the pages
  Btrfs: just do dirty page flush for the inode with compression before direct IO
  ...
2014-04-04 15:31:36 -07:00
Linus Torvalds
34917f9713 One of the main highlights this time, is not the patches themselves
but instead the widening contributor base. It is good to see that
 interest is increasing in GFS2, and I'd like to thank all the
 contributors to this patch set.
 
 In addition to the usual set of bug fixes and clean ups, there are
 patches to improve inode creation performance when xattrs are
 required and some improvements to the transaction code which is
 intended to help improve scalability after further changes in due
 course.
 
 Journal extent mapping is also updated to make it more efficient
 and again, this is a foundation for future work in this area.
 
 The maximum number of ACLs has been increased to 300 (for a 4k
 block size) which means that even with a few additional xattrs
 from selinux, everything should fit within a single fs block.
 
 There is also a patch to bring GFS2's own copy of the writepages
 code up to the same level as the core VFS. Eventually we may be
 able to merge some of this code, since it is fairly similar.
 
 The other major change this time, is bringing consistency to
 the printing of messages via fs_<level>, pr_<level> macros.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOn+JAAoJEMrg3m4a/8jSSoYQALctSOmyGW978JMAKiwuUeSr
 367ho/I/WfZWybWH7iZ/hdEMNCUCnP3C1ZJhYKJ6J60h35p1hIK7DYp9tOy0RsTS
 JD3VamE/jboljXyZaaMCtly7HPQMV82rRmI3+bSoXpT4mPz+PB+kRCe2QkvyVAsh
 5tojtLz6L/In/eo4UlqZjn1BITcYRL5AgMi+8h8h6Foi4MgnFISZbezC6U5eO46P
 DT/xwd0fw+o5ZTm/dTQmhCCH30y4cpKZnNhi+xhHrEm95gBZWcONHD0qyNZe3fBc
 WuGUU9hURHHkqT671T7sBGzfNrsKk1OgNzFNy1YrF5C+t6hpG9iAKRIHtuVqSqPx
 OblhKP0lebDY1L41NqZR4Up+pUjCMxOs3f+FAl2rlHRBIQdroOu82CZHdTBfM/HJ
 1ZvkMrIkxMKb7RtSnTdXsPxcPPZNakHhDaNxHMmMlFlflbXGQqWZaMMhK181d7dn
 Y0WU2ayPmjjUdO5OnekMV5J/hNYNLobnV9OO75j4pyqlnHLIIycc/wgNULcU+OJ6
 GooOQJNnnAo+2JUvS+Ejn88q2if05HOg4fCXRfu4bdA2zDehei1jr5xz5IWj0OAM
 AlmTgUYzK7osvA1XtNd6naCmes+fnm3+Jfh0+YtpeZKgCvaYYCoZCHJccb+a0AIq
 7dTkyCQtgsKE+yjPKose
 =IWmZ
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw

Pull GFS2 updates from Steven Whitehouse:
 "One of the main highlights this time, is not the patches themselves
  but instead the widening contributor base.  It is good to see that
  interest is increasing in GFS2, and I'd like to thank all the
  contributors to this patch set.

  In addition to the usual set of bug fixes and clean ups, there are
  patches to improve inode creation performance when xattrs are required
  and some improvements to the transaction code which is intended to
  help improve scalability after further changes in due course.

  Journal extent mapping is also updated to make it more efficient and
  again, this is a foundation for future work in this area.

  The maximum number of ACLs has been increased to 300 (for a 4k block
  size) which means that even with a few additional xattrs from selinux,
  everything should fit within a single fs block.

  There is also a patch to bring GFS2's own copy of the writepages code
  up to the same level as the core VFS.  Eventually we may be able to
  merge some of this code, since it is fairly similar.

  The other major change this time, is bringing consistency to the
  printing of messages via fs_<level>, pr_<level> macros"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (29 commits)
  GFS2: Fix address space from page function
  GFS2: Fix uninitialized VFS inode in gfs2_create_inode
  GFS2: Fix return value in slot_get()
  GFS2: inline function gfs2_set_mode
  GFS2: Remove extraneous function gfs2_security_init
  GFS2: Increase the max number of ACLs
  GFS2: Re-add a call to log_flush_wait when flushing the journal
  GFS2: Ensure workqueue is scheduled after noexp request
  GFS2: check NULL return value in gfs2_ok_to_move
  GFS2: Convert gfs2_lm_withdraw to use fs_err
  GFS2: Use fs_<level> more often
  GFS2: Use pr_<level> more consistently
  GFS2: Move recovery variables to journal structure in memory
  GFS2: global conversion to pr_foo()
  GFS2: return -E2BIG if hit the maximum limits of ACLs
  GFS2: Clean up journal extent mapping
  GFS2: replace kmalloc - __vmalloc / memset 0
  GFS2: Remove extra "if" in gfs2_log_flush()
  fs: NULL dereference in posix_acl_to_xattr()
  GFS2: Move log buffer accounting to transaction
  ...
2014-04-04 14:49:16 -07:00
Linus Torvalds
f7789dc0d4 Merge branch 'locks-3.15' of git://git.samba.org/jlayton/linux
Pull file locking updates from Jeff Layton:
 "Highlights:

   - maintainership change for fs/locks.c.  Willy's not interested in
     maintaining it these days, and is OK with Bruce and I taking it.
   - fix for open vs setlease race that Al ID'ed
   - cleanup and consolidation of file locking code
   - eliminate unneeded BUG() call
   - merge of file-private lock implementation"

* 'locks-3.15' of git://git.samba.org/jlayton/linux:
  locks: make locks_mandatory_area check for file-private locks
  locks: fix locks_mandatory_locked to respect file-private locks
  locks: require that flock->l_pid be set to 0 for file-private locks
  locks: add new fcntl cmd values for handling file private locks
  locks: skip deadlock detection on FL_FILE_PVT locks
  locks: pass the cmd value to fcntl_getlk/getlk64
  locks: report l_pid as -1 for FL_FILE_PVT locks
  locks: make /proc/locks show IS_FILE_PVT locks as type "FLPVT"
  locks: rename locks_remove_flock to locks_remove_file
  locks: consolidate checks for compatible filp->f_mode values in setlk handlers
  locks: fix posix lock range overflow handling
  locks: eliminate BUG() call when there's an unexpected lock on file close
  locks: add __acquires and __releases annotations to locks_start and locks_stop
  locks: remove "inline" qualifier from fl_link manipulation functions
  locks: clean up comment typo
  locks: close potential race between setlease and open
  MAINTAINERS: update entry for fs/locks.c
2014-04-04 14:21:20 -07:00
Linus Torvalds
7df934526c Merge branch 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull renameat2 system call from Miklos Szeredi:
 "This adds a new syscall, renameat2(), which is the same as renameat()
  but with a flags argument.

  The purpose of extending rename is to add cross-rename, a symmetric
  variant of rename, which exchanges the two files.  This allows
  interesting things, which were not possible before, for example
  atomically replacing a directory tree with a symlink, etc...  This
  also allows overlayfs and friends to operate on whiteouts atomically.

  Andy Lutomirski also suggested a "noreplace" flag, which disables the
  overwriting behavior of rename.

  These two flags, RENAME_EXCHANGE and RENAME_NOREPLACE are only
  implemented for ext4 as an example and for testing"

* 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ext4: add cross rename support
  ext4: rename: split out helper functions
  ext4: rename: move EMLINK check up
  ext4: rename: create ext4_renament structure for local vars
  vfs: add cross-rename
  vfs: lock_two_nondirectories: allow directory args
  security: add flags to rename hooks
  vfs: add RENAME_NOREPLACE flag
  vfs: add renameat2 syscall
  vfs: rename: use common code for dir and non-dir
  vfs: rename: move d_move() up
  vfs: add d_is_dir()
2014-04-04 14:03:05 -07:00
J. Bruce Fields
06f9cc12ca nfsd4: don't create unnecessary mask acl
Any setattr of the ACL attribute, even if it sets just the basic 3-ACE
ACL exactly as it was returned from a file with only mode bits, creates
a mask entry, and it is only the mask, not group, entry that is changed
by subsequent modifications of the mode bits.

So, for example, it's surprising that GROUP@ is left without read or
write permissions after a chmod 0666:

  touch test
  chmod 0600 test
  nfs4_getfacl test
        A::OWNER@:rwatTcCy
        A::GROUP@:tcy
        A::EVERYONE@:tcy
  nfs4_getfacl test | nfs4_setfacl -S - test #
  chmod 0666 test
  nfs4_getfacl test
        A::OWNER@:rwatTcCy
        A::GROUP@:tcy
        D::GROUP@:rwa
        A::EVERYONE@:rwatcy

So, let's stop creating the unnecessary mask ACL.

A mask will still be created on non-trivial ACLs (ACLs with actual named
user and group ACEs), so the odd posix-acl behavior of chmod modifying
only the mask will still be left in that case; but that's consistent
with local behavior.

Reported-by: Soumya Koduri <skoduri@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-04-04 10:13:23 -04:00
J. Bruce Fields
082f31a216 nfsd: revert v2 half of "nfsd: don't return high mode bits"
This reverts the part of commit 6e14b46b91
that changes NFSv2 behavior.

Mark Lord found that it broke nfs-root for Linux clients, because it
broke NFSv2.

In fact, from RFC 1094:

	"Notice that the file type is specified both in the mode bits
	and in the file type.  This is really a bug in the protocol and
	will be fixed in future versions."

So NFSv2 clients really are expected to depend on the high bits of the
mode.

Cc: stable@kernel.org
Reported-by: Mark Lord <mlord@pobox.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-04-04 10:13:07 -04:00
Linus Torvalds
76ca7d1cca Merge branch 'akpm' (incoming from Andrew)
Merge first patch-bomb from Andrew Morton:
 - Various misc bits
 - kmemleak fixes
 - small befs, codafs, cifs, efs, freexxfs, hfsplus, minixfs, reiserfs things
 - fanotify
 - I appear to have become SuperH maintainer
 - ocfs2 updates
 - direct-io tweaks
 - a bit of the MM queue
 - printk updates
 - MAINTAINERS maintenance
 - some backlight things
 - lib/ updates
 - checkpatch updates
 - the rtc queue
 - nilfs2 updates
 - Small Documentation/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (237 commits)
  Documentation/SubmittingPatches: remove references to patch-scripts
  Documentation/SubmittingPatches: update some dead URLs
  Documentation/filesystems/ntfs.txt: remove changelog reference
  Documentation/kmemleak.txt: updates
  fs/reiserfs/super.c: add __init to init_inodecache
  fs/reiserfs: move prototype declaration to header file
  fs/hfsplus/attributes.c: add __init to hfsplus_create_attr_tree_cache()
  fs/hfsplus/extents.c: fix concurrent acess of alloc_blocks
  fs/hfsplus/extents.c: remove unused variable in hfsplus_get_block
  nilfs2: update project's web site in nilfs2.txt
  nilfs2: update MAINTAINERS file entries fix
  nilfs2: verify metadata sizes read from disk
  nilfs2: add FITRIM ioctl support for nilfs2
  nilfs2: add nilfs_sufile_trim_fs to trim clean segs
  nilfs2: implementation of NILFS_IOCTL_SET_SUINFO ioctl
  nilfs2: add nilfs_sufile_set_suinfo to update segment usage
  nilfs2: add struct nilfs_suinfo_update and flags
  nilfs2: update MAINTAINERS file entries
  fs/coda/inode.c: add __init to init_inodecache()
  BEFS: logging cleanup
  ...
2014-04-03 16:22:16 -07:00
Fabian Frederick
31e143686a fs/reiserfs/super.c: add __init to init_inodecache
init_inodecache is only called by __init init_reiserfs_fs.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Rashika Kheria
ea0856cd50 fs/reiserfs: move prototype declaration to header file
Move prototype declaration to header file reiserfs/reiserfs.h from
reiserfs/super.c because they are used by more than one file.

This eliminates the following warning in reiserfs/bitmap.c:

  fs/reiserfs/bitmap.c:647:6: warning: no previous prototype for `show_alloc_options' [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Fabian Frederick
c11e614d71 fs/hfsplus/attributes.c: add __init to hfsplus_create_attr_tree_cache()
hfsplus_create_attr_tree_cache is only called by __init init_hfsplus_fs

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Sougata Santra
d7bdb996ae fs/hfsplus/extents.c: fix concurrent acess of alloc_blocks
Concurrent access to alloc_blocks in hfsplus_inode_info() is protected
by extents_lock mutex.  This patch fixes two instances where
alloc_blocks modification was not protected with this lock.

This fixes possible allocation bitmap corruption in race conditions
while extending and truncating files.

[akpm@linux-foundation.org: take extents_lock before taking a copy of ->alloc_blocks]
[akpm@linux-foundation.org: remove now-unused label `out']
Signed-off-by: Sougata Santra <sougata@tuxera.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Sougata Santra
abfeb724b4 fs/hfsplus/extents.c: remove unused variable in hfsplus_get_block
The variable is defined but not used.  Generally it compiles away with
-O2 optimization hence it does not show a warning.

Signed-off-by: Sougata Santra <sougata@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Ryusuke Konishi
0ec060d188 nilfs2: verify metadata sizes read from disk
Add code to check sizes of on-disk data of metadata files such as inode
size, segment usage size, DAT entry size, and checkpoint size.  Although
these sizes are read from disk, the current implementation doesn't check
them.

If these sizes are not sane on disk, it can cause out-of-range access to
metadata or memory access overrun on metadata block buffers due to
overflow in sundry calculations.

Both lower limit and upper limit of metadata sizes are verified to
prevent these issues.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Andreas Rohner
f9f32c44e7 nilfs2: add FITRIM ioctl support for nilfs2
Add support for the FITRIM ioctl, which enables user space tools to
issue TRIM/DISCARD requests to the underlying device.  Every clean
segment within the specified range will be discarded.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Andreas Rohner
82e11e857b nilfs2: add nilfs_sufile_trim_fs to trim clean segs
Add nilfs_sufile_trim_fs(), which takes an fstrim_range structure and
calls blkdev_issue_discard for every clean segment in the specified
range.  The range is truncated to file system block boundaries.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Andreas Rohner
2cc88f3a5f nilfs2: implementation of NILFS_IOCTL_SET_SUINFO ioctl
With this ioctl the segment usage entries in the SUFILE can be updated
from userspace.

This is useful, because it allows the userspace GC to modify and update
segment usage entries for specific segments, which enables it to avoid
unnecessary write operations.

If a segment needs to be cleaned, but there is no or very little
reclaimable space in it, the cleaning operation basically degrades to a
useless moving operation.  In the end the only thing that changes is the
location of the data and a timestamp in the segment usage information.
With this ioctl the GC can skip the cleaning and update the segment
usage entries directly instead.

This is basically a shortcut to cleaning the segment.  It is still
necessary to read the segment summary information, but the writing of
the live blocks can be skipped if it's not worth it.

[konishi.ryusuke@lab.ntt.co.jp: add description of NILFS_IOCTL_SET_SUINFO ioctl]
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Andreas Rohner
00e9ffcd27 nilfs2: add nilfs_sufile_set_suinfo to update segment usage
Introduce nilfs_sufile_set_suinfo(), which expects an array of
nilfs_suinfo_update structures and updates the segment usage information
accordingly.

This is basically a helper function for the newly introduced
NILFS_IOCTL_SET_SUINFO ioctl.

[konishi.ryusuke@lab.ntt.co.jp: use put_bh() instead of brelse() because we know bh != NULL]
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Fabian Frederick
5f356fd4d7 fs/coda/inode.c: add __init to init_inodecache()
init_inodecache is only called by __init init_coda

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Fabian Frederick
dac52fc182 BEFS: logging cleanup
Summary:
 - all printk(KERN_foo converted to pr_foo()
 - add pr_fmt and remove redundant prefixes
 - convert befs_() to va_format (based on patch by Joe Perches)
 - remove non standard %Lu
 - use __func__ for all debugging

[akpm@linux-foundation.org: fix printk warnings, reported by Fengguang]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Cc: Fengguang Wu <fengguang.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Fabian Frederick
91a52ab7d6 fs/befs/linuxvfs.c: add __init to befs_init_inodecache()
init_inodecache is only called by __init init_befs_fs.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:24 -07:00
Fabian Frederick
2d4319ef57 befs: replace kmalloc/memset 0 by kzalloc
Use kzalloc for clean fs_info allocation like other filesystems.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:24 -07:00
Fabian Frederick
84ee353df0 fs/minix/inode.c: add __init to init_inodecache()
init_inodecache is only called by __init init_minix_fs.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:24 -07:00
Luis Henriques
b003f96502 binfmt_misc: add missing 'break' statement
A missing 'break' statement in bm_status_write() results in a user program
receiving '3' when doing the following:

  write(fd, "-1", 2);

Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:16 -07:00
Fabian Frederick
7a42d4b6a1 fs/efs/super.c: add __init to init_inodecache()
init_inodecache is only called by __init init_efs_fs.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:16 -07:00
Josh Triplett
69369a7003 fs, kernel: permit disabling the uselib syscall
uselib hasn't been used since libc5; glibc does not use it.  Support
turning it off.

When disabled, also omit the load_elf_library implementation from
binfmt_elf.c, which only uselib invokes.

bloat-o-meter:
add/remove: 0/4 grow/shrink: 0/1 up/down: 0/-785 (-785)
function                                     old     new   delta
padzero                                       39      36      -3
uselib_flags                                  20       -     -20
sys_uselib                                   168       -    -168
SyS_uselib                                   168       -    -168
load_elf_library                             426       -    -426

The new CONFIG_USELIB defaults to `y'.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:05 -07:00
Wang YanQing
8f6c5ffc89 kernel/groups.c: remove return value of set_groups
After commit 6307f8fee2 ("security: remove dead hook task_setgroups"),
set_groups will always return zero, so we could just remove return value
of set_groups.

This patch reduces code size, and simplfies code to use set_groups,
because we don't need to check its return value any more.

[akpm@linux-foundation.org: remove obsolete claims from set_groups() comment]
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:05 -07:00
Fabian Frederick
6af9f7bf3c sys_sysfs: Add CONFIG_SYSFS_SYSCALL
sys_sysfs is an obsolete system call no longer supported by libc.

 - This patch adds a default CONFIG_SYSFS_SYSCALL=y

 - Option can be turned off in expert mode.

 - cond_syscall added to kernel/sys_ni.c

[akpm@linux-foundation.org: tweak Kconfig help text]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:05 -07:00
Dave Hansen
5509a5d27b drop_caches: add some documentation and info message
There is plenty of anecdotal evidence and a load of blog posts
suggesting that using "drop_caches" periodically keeps your system
running in "tip top shape".  Perhaps adding some kernel documentation
will increase the amount of accurate data on its use.

If we are not shrinking caches effectively, then we have real bugs.
Using drop_caches will simply mask the bugs and make them harder to
find, but certainly does not fix them, nor is it an appropriate
"workaround" to limit the size of the caches.  On the contrary, there
have been bug reports on issues that turned out to be misguided use of
cache dropping.

Dropping caches is a very drastic and disruptive operation that is good
for debugging and running tests, but if it creates bug reports from
production use, kernel developers should be aware of its use.

Add a bit more documentation about it, a syslog message to track down
abusers, and vmstat drop counters to help analyze problem reports.

[akpm@linux-foundation.org: checkpatch fixes]
[hannes@cmpxchg.org: add runtime suppression control]
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:04 -07:00
Sasha Levin
67f9fd91f9 mm: remove read_cache_page_async()
This patch removes read_cache_page_async() which wasn't really needed
anywhere and simplifies the code around it a bit.

read_cache_page_async() is useful when we want to read a page into the
cache without waiting for it to complete.  This happens when the
appropriate callback 'filler' doesn't complete its read operation and
releases the page lock immediately, and instead queues a different
completion routine to do that.  This never actually happened anywhere in
the code.

read_cache_page_async() had 3 different callers:

- read_cache_page() which is the sync version, it would just wait for
  the requested read to complete using wait_on_page_read().

- JFFS2 would call it from jffs2_gc_fetch_page(), but the filler
  function it supplied doesn't do any async reads, and would complete
  before the filler function returns - making it actually a sync read.

- CRAMFS would call it using the read_mapping_page_async() wrapper, with
  a similar story to JFFS2 - the filler function doesn't do anything that
  reminds async reads and would always complete before the filler function
  returns.

To sum it up, the code in mm/filemap.c never took advantage of having
read_cache_page_async().  While there are filler callbacks that do async
reads (such as the block one), we always called it with the
read_cache_page().

This patch adds a mandatory wait for read to complete when adding a new
page to the cache, and removes read_cache_page_async() and its wrappers.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:04 -07:00
Johannes Weiner
91b0abe36a mm + fs: store shadow entries in page cache
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:01 -07:00
Johannes Weiner
0cd6144aad mm + fs: prepare for non-page entries in page cache radix trees
shmem mappings already contain exceptional entries where swap slot
information is remembered.

To be able to store eviction information for regular page cache, prepare
every site dealing with the radix trees directly to handle entries other
than pages.

The common lookup functions will filter out non-page entries and return
NULL for page cache holes, just as before.  But provide a raw version of
the API which returns non-page entries as well, and switch shmem over to
use it.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:00 -07:00
Johannes Weiner
e7b563bb2a mm: filemap: move radix tree hole searching here
The radix tree hole searching code is only used for page cache, for
example the readahead code trying to get a a picture of the area
surrounding a fault.

It sufficed to rely on the radix tree definition of holes, which is
"empty tree slot".  But this is about to change, though, as shadow page
descriptors will be stored in the page cache after the actual pages get
evicted from memory.

Move the functions over to mm/filemap.c and make them native page cache
operations, where they can later be adapted to handle the new definition
of "page cache hole".

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:00 -07:00
Johannes Weiner
55881bc76f fs: cachefiles: use add_to_page_cache_lru()
This code used to have its own lru cache pagevec up until a0b8cab3 ("mm:
remove lru parameter from __pagevec_lru_add and remove parts of pagevec
API").  Now it's just add_to_page_cache() followed by lru_cache_add(),
might as well use add_to_page_cache_lru() directly.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:00 -07:00
Joonsoo Kim
9119a41e90 mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping.  For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.

Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:59 -07:00
Dan Carpenter
45d4f85504 fs/direct-io.c: remove some left over checks
We know that "ret > 0" is true here.  These tests were left over from
commit 02afc27fae ('direct-io: Handle O_(D)SYNC AIO') and aren't
needed any more.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:57 -07:00
Gu Zheng
2b665e276c fs/direct-io.c: remove redundant comparison
The return value of bio_get_nr_vecs() cannot be bigger than
BIO_MAX_PAGES, so we can remove redundant the comparison between
nr_pages and BIO_MAX_PAGES.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:57 -07:00
Wengang Wang
9c339255cb ocfs2: pass "new" parameter to ocfs2_init_xattr_bucket
This patch fixes the following crash:

  kernel BUG at fs/ocfs2/uptodate.c:530!
  Modules linked in: ocfs2(F) ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bridge xen_pciback xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd sunrpc 8021q garp stp llc bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi iTCO_wdt iTCO_vendor_support dcdbas coretemp freq_table mperf microcode pcspkr serio_raw bnx2 lpc_ich mfd_core i5k_amb i5000_edac edac_core e1000e sg shpchp ext4(F) jbd2(F) mbcache(F) dm_round_robin(F) sr_mod(F) cdrom(F) usb_storage(F) sd_mod(F) crc_t10dif(F) pata_acpi(F) ata_generic(F) ata_piix(F) mptsas(F) mptscsih(F) mptbase(F) scsi_transport_sas(F) radeon(F)
   ttm(F) drm_kms_helper(F) drm(F) hwmon(F) i2c_algo_bit(F) i2c_core(F) dm_multipath(F) dm_mirror(F) dm_region_hash(F) dm_log(F) dm_mod(F)
  CPU 5
  Pid: 21303, comm: xattr-test Tainted: GF       W    3.8.13-30.el6uek.x86_64  Dell Inc. PowerEdge 1950/0M788G
  RIP: ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]
  Process xattr-test (pid: 21303, threadinfo ffff880017aca000, task ffff880016a2c480)
  Call Trace:
    ocfs2_init_xattr_bucket+0x8a/0x120 [ocfs2]
    ocfs2_cp_xattr_bucket+0xbb/0x1b0 [ocfs2]
    ocfs2_extend_xattr_bucket+0x20a/0x2f0 [ocfs2]
    ocfs2_add_new_xattr_bucket+0x23e/0x4b0 [ocfs2]
    ocfs2_xattr_set_entry_index_block+0x13c/0x3d0 [ocfs2]
    ocfs2_xattr_block_set+0xf9/0x220 [ocfs2]
    __ocfs2_xattr_set_handle+0x118/0x710 [ocfs2]
    ocfs2_xattr_set+0x691/0x880 [ocfs2]
    ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
    generic_setxattr+0x96/0xa0
    __vfs_setxattr_noperm+0x7b/0x170
    vfs_setxattr+0xbc/0xc0
    setxattr+0xde/0x230
    sys_fsetxattr+0xc6/0xf0
    system_call_fastpath+0x16/0x1b
  Code: 41 80 0c 24 01 48 89 df e8 7d f0 ff ff 4c 89 e6 48 89 df e8 a2 fe ff ff 48 89 df e8 3a f0 ff ff 48 8b 1c 24 4c 8b 64 24 08 c9 c3 <0f> 0b eb fe 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 66 66
  RIP  ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]

It hit the BUG_ON() in ocfs2_set_new_buffer_uptodate():

    void ocfs2_set_new_buffer_uptodate(struct ocfs2_caching_info *ci,
                                       struct buffer_head *bh)
    {
          /* This should definitely *not* exist in our cache */
          if (ocfs2_buffer_cached(ci, bh))
                  printk(KERN_ERR "bh->b_blocknr: %lu @ %p\n", bh->b_blocknr, bh);
          BUG_ON(ocfs2_buffer_cached(ci, bh));

          set_buffer_uptodate(bh);

          ocfs2_metadata_cache_io_lock(ci);
          ocfs2_set_buffer_uptodate(ci, bh);
          ocfs2_metadata_cache_io_unlock(ci);
    }

The problem here is:

We cached a block, but the buffer_head got reused.  When we are to pick
up this block again, a new buffer_head created with UPTODATE flag
cleared.  ocfs2_buffer_uptodate() returned false since no UPTODATE is
set on the buffer_head.  so we set this block to cache as a NEW block,
then it failed at asserting block is not in cache.

The fix is to add a new parameter indicating the bucket is a new
allocated or not to ocfs2_init_xattr_bucket().
ocfs2_init_xattr_bucket() assert block not cached accordingly.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:57 -07:00
jiangyiwen
43b10a2037 ocfs2: avoid system inode ref confusion by adding mutex lock
The following case may lead to the same system inode ref in confusion.

A thread                            B thread
ocfs2_get_system_file_inode
->get_local_system_inode
->_ocfs2_get_system_file_inode
                                    because of *arr == NULL,
                                    ocfs2_get_system_file_inode
                                    ->get_local_system_inode
                                    ->_ocfs2_get_system_file_inode
gets first ref thru
_ocfs2_get_system_file_inode,
gets second ref thru igrab and
set *arr = inode
                                    at the moment, B thread also gets
                                    two refs, so lead to one more
                                    inode ref.

So add mutex lock to avoid multi thread set two inode ref once at the
same time.

Signed-off-by: jiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:57 -07:00
jiangyiwen
7dc3e83901 ocfs2: iput inode alloc when failed locally
In ocfs2_info_handle_freeinode() and ocfs2_test_inode_bit() func, after
calls ocfs2_get_system_file_inode() to get inode ref, if calls
ocfs2_info_scan_inode_alloc() or ocfs2_inode_lock() failed, we should
iput inode alloc to avoid leaking the inode.

Signed-off-by: jiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:57 -07:00
Tariq Saeed
da8ded405d ocfs2/o2net: o2net_listen_data_ready should do nothing if socket state is not TCP_LISTEN
Orabug: 17330860

When accepting an incomming connection o2net_accept_one clones a child
data socket from the parent listening socket.  It then proceeds to setup
the child with callback o2net_data_ready() and sk_user_data to NULL.  If
data arrives in this window, o2net_listen_data_ready will be called with
some non-deterministic value in sk_user_data (not inherited).  We panic
when we page fault on sk_user_data -- in parent it is
sock_def_readable().

The fix is to recognize that this is a data socket being set up by
looking at the socket state and do nothing.

Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:56 -07:00
Younger Liu
db66c71577 ocfs2: rollback alloc_dinode counts when ocfs2_block_group_set_bits() failed
After updating alloc_dinode counts in ocfs2_alloc_dinode_update_counts(),
if ocfs2_alloc_dinode_update_bitmap() failed, there is a rare case that
some space may be lost.

So, roll back alloc_dinode counts when ocfs2_block_group_set_bits()
failed.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Younger Liu <younger.liucn@gmail.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:56 -07:00
Wengang Wang
e228f64398 ocfs2: flock: drop cross-node lock when failed locally
ocfs2_do_flock() calls ocfs2_file_lock() to get the cross-node clock and
then call flock_lock_file_wait() to compete with local processes.  In
case flock_lock_file_wait() failed, say -ENOMEM, clean up work is not
done.  This patch adds the cleanup --drop the cross-node lock which was
just granted.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:56 -07:00
Darrick J. Wong
6fdb702d62 ocfs2: call ocfs2_update_inode_fsync_trans when updating any inode
Ensure that ocfs2_update_inode_fsync_trans() is called any time we touch
an inode in a given transaction.  This is a follow-on to the previous
patch to reduce lock contention and deadlocking during an fsync
operation.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Wengang <wen.gang.wang@oracle.com>
Cc: Greg Marsden <greg.marsden@oracle.com>
Cc: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:56 -07:00
Tetsuo Handa
f81c20158f ocfs2: fix panic on kfree(xattr->name)
Commit 9548906b2b ('xattr: Constify ->name member of "struct xattr"')
missed that ocfs2 is calling kfree(xattr->name).  As a result, kernel
panic occurs upon calling kfree(xattr->name) because xattr->name refers
static constant names.  This patch removes kfree(xattr->name) from
ocfs2_mknod() and ocfs2_symlink().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Tested-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:56 -07:00
alex chen
f7cf4f5bfe ocfs2: do not put bh when buffer_uptodate failed
Do not put bh when buffer_uptodate failed in ocfs2_write_block and
ocfs2_write_super_or_backup, because it will put bh in b_end_io.
Otherwise it will hit a warning "VFS: brelse: Trying to free free
buffer".

Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:56 -07:00
Xue jiufei
466e68c430 ocfs2: __ocfs2_mknod_locked should return error when ocfs2_create_new_inode_locks() failed
When ocfs2_create_new_inode_locks() return error, inode open lock may
not be obtainted for this inode.  So other nodes can remove this file
and free dinode when inode still remain in memory on this node, which is
not correct and may trigger BUG.  So __ocfs2_mknod_locked should return
error when ocfs2_create_new_inode_locks() failed.

              Node_1                              Node_2
create fileA, call ocfs2_mknod()
  -> ocfs2_get_init_inode(), allocate inodeA
  -> ocfs2_claim_new_inode(), claim dinode(dinodeA)
  -> call ocfs2_create_new_inode_locks(),
     create open lock failed, return error
  -> __ocfs2_mknod_locked return success

                                                unlink fileA
                                                try open lock succeed,
                                                and free dinodeA

create another file, call ocfs2_mknod()
  -> ocfs2_get_init_inode(), allocate inodeB
  -> ocfs2_claim_new_inode(), as Node_2 had freed dinodeA,
     so claim dinodeA and update generation for dinodeA

call __ocfs2_drop_dl_inodes()->ocfs2_delete_inode()
to free inodeA, and finally triggers BUG
on(inode->i_generation != le32_to_cpu(fe->i_generation))
in function ocfs2_inode_lock_update().

Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:55 -07:00
Tariq Saeed
3ed2be719e ocfs2: allow for more than one data extent when creating xattr
Orabug: 18108070

ocfs2_xattr_extend_allocation() hits panic when creating xattr during
data extent alloc phase.  The problem occurs if due to local alloc
fragmentation, clusters are spread over multiple extents.  In this case
ocfs2_add_clusters_in_btree() finds no space to store more than one
extent record and therefore fails returning RESTART_META.  The situation
is anticipated for xattr update case but not xattr create case.  This
fix simply ports that code to create case.

Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:55 -07:00
Zhonghua Guo
a35ad97cd4 ocfs2: fix deadlock risk when kmalloc failed in dlm_query_region_handler
In dlm_query_region_handler(), once kmalloc failed, it will unlock
dlm_domain_lock without lock first, then deadlock happens.

Signed-off-by: Zhonghua Guo <guozhonghua@h3c.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Tested-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:55 -07:00
Jensen
c8d888d9f1 ocfs2: llseek requires ocfs2 inode lock for the file in SEEK_END
llseek requires ocfs2 inode lock for updating the file size in SEEK_END.
because the file size maybe update on another node.

This bug can be reproduce the following scenario: at first, we dd a test
fileA, the file size is 10k.

on NodeA:
---------
 1) open the test fileA, lseek the end of file. and print the position.
 2) close the test fileA

on NodeB:
 1) open the test fileA, append the 5k data to test FileA.
 2) lseek the end of file. and print the position.
 3) close file.

At first we run the test program1 on NodeA , the result is 10k.  And
then run the test program2 on NodeB, the result is 15k.  At last, we run
the test program1 on NodeA again, the result is 10k.

After applying this patch the three step result is 15k.

test result: 1000000 times lseek call;
index        lseek with inode lock (unit:us)                lseek without inode lock (unit:us)
  1                   1168162                                    555383
  2                   1168011                                    549504
  3                   1170538                                    549396
  4                   1170375                                    551685
  5                   1170444                                    556719
  6                   1174364                                    555307
  7                   1163294                                    551552
  8                   1170080                                    549350
  9                   1162464                                    553700
 10                   1165441                                    552594
 avg                  1168317                                    552519

avg with lock - avg without lock = 615798
(avg with lock - avg without lock)/1000000=0.615798 us

Signed-off-by: Jensen <shencanquan@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:55 -07:00
Joseph Qi
41b63efb68 ocfs2: fix type conversion risk when get cluster attributes
In o2nm_cluster, cl_idle_timeout_ms, cl_keepalive_delay_ms, as well as
cl_reconnect_delay_ms, are defined as type of unsigned int.  So we
should also use unsigned int in the helper functions.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:55 -07:00
Goldwyn Rodrigues
8ed6b23709 ocfs2: revert iput deferring code in ocfs2_drop_dentry_lock
The following patches are reverted in this patch because these patches
caused performance regression in the remote unlink() calls.

  ea455f8ab6 - ocfs2: Push out dropping of dentry lock to ocfs2_wq
  f7b1aa69be - ocfs2: Fix deadlock on umount
  5fd1318937 - ocfs2: Don't oops in ocfs2_kill_sb on a failed mount

Previous patches in this series removed the possible deadlocks from
downconvert thread so the above patches shouldn't be needed anymore.

The regression is caused because these patches delay the iput() in case
of dentry unlocks.  This also delays the unlocking of the open lockres.
The open lockresource is required to test if the inode can be wiped from
disk or not.  When the deleting node does not get the open lock, it
marks it as orphan (even though it is not in use by another
node/process) and causes a journal checkpoint.  This delays operations
following the inode eviction.  This also moves the inode to the orphaned
inode which further causes more I/O and a lot of unneccessary orphans.

The following script can be used to generate the load causing issues:

  declare -a create
  declare -a remove
  declare -a iterations=(1 2 4 8 16 32 64 128 256 512 1024 2048 4096 8192 16384)
  unique="`mktemp -u XXXXX`"
  script="/tmp/idontknow-${unique}.sh"
  cat <<EOF > "${script}"
  for n in {1..8}; do mkdir -p test/dir\${n}
    eval touch test/dir\${n}/foo{1.."\$1"}
  done
  EOF
  chmod 700 "${script}"

  function fcreate ()
  {
    exec 2>&1 /usr/bin/time --format=%E "${script}" "$1"
  }

  function fremove ()
  {
    exec 2>&1 /usr/bin/time --format=%E ssh node2 "cd `pwd`; rm -Rf test*"
  }

  function fcp ()
  {
    exec 2>&1 /usr/bin/time --format=%E ssh node3 "cd `pwd`; cp -R test test.new"
  }

  echo -------------------------------------------------
  echo "| # files | create #s | copy #s | remove #s |"
  echo -------------------------------------------------
  for ((x=0; x < ${#iterations[*]} ; x++)) do
    create[$x]="`fcreate ${iterations[$x]}`"
    copy[$x]="`fcp ${iterations[$x]}`"
    remove[$x]="`fremove`"
    printf "| %8d | %9s | %9s | %9s |\n" ${iterations[$x]} ${create[$x]} ${copy[$x]} ${remove[$x]}
  done
  rm "${script}"
  echo "------------------------"

Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:55 -07:00
Jan Kara
84d86f83f9 ocfs2: avoid blocking in ocfs2_mark_lockres_freeing() in downconvert thread
If we are dropping last inode reference from downconvert thread, we will
end up calling ocfs2_mark_lockres_freeing() which can block if the lock
we are freeing is queued thus creating an A-A deadlock.  Luckily, since
we are the downconvert thread, we can immediately dequeue the lock and
thus avoid waiting in this case.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:55 -07:00
Jan Kara
e3a767b60f ocfs2: implement delayed dropping of last dquot reference
We cannot drop last dquot reference from downconvert thread as that
creates the following deadlock:

NODE 1                                  NODE2
holds dentry lock for 'foo'
holds inode lock for GLOBAL_BITMAP_SYSTEM_INODE
                                        dquot_initialize(bar)
                                          ocfs2_dquot_acquire()
                                            ocfs2_inode_lock(USER_QUOTA_SYSTEM_INODE)
                                            ...
downconvert thread (triggered from another
node or a different process from NODE2)
  ocfs2_dentry_post_unlock()
    ...
    iput(foo)
      ocfs2_evict_inode(foo)
        ocfs2_clear_inode(foo)
          dquot_drop(inode)
            ...
	    ocfs2_dquot_release()
              ocfs2_inode_lock(USER_QUOTA_SYSTEM_INODE)
               - blocks
                                            finds we need more space in
                                            quota file
                                            ...
                                            ocfs2_extend_no_holes()
                                              ocfs2_inode_lock(GLOBAL_BITMAP_SYSTEM_INODE)
                                                - deadlocks waiting for
                                                  downconvert thread

We solve the problem by postponing dropping of the last dquot reference to
a workqueue if it happens from the downconvert thread.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:54 -07:00
Jan Kara
9f985cb6c4 quota: provide function to grab quota structure reference
Provide dqgrab() function to get quota structure reference when we are
sure it already has at least one active reference.  Make use of this
function inside quota code.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:54 -07:00
Jan Kara
bd62ad7aeb ocfs2: move dquot_initialize() in ocfs2_delete_inode() somewhat later
Move dquot_initalize() call in ocfs2_delete_inode() after the moment we
verify inode is actually a sane one to delete.  We certainly don't want
to initialize quota for system inodes etc.  This also avoids calling
into quota code from downconvert thread.

Add more details into the comment why bailing out from
ocfs2_delete_inode() when we are in downconvert thread is OK.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:54 -07:00
Jan Kara
7bf619c142 ocfs2: remove OCFS2_INODE_SKIP_DELETE flag
The flag was never set, delete it.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:54 -07:00
Goldwyn Rodrigues
765aabbbc7 ocfs2: add dlm_recover_callback_support in sysfs
This is a part of the nocontrold feature which was incorporated sometime
back.

This is required for backward compatibility of the tools, specifically
the scenario where the tools with recovery callback is used with a
kernel not using the recovery callbacks (older kernel + newer tools).
The tools look for this file to understand if the kernel supports DLM
recovery callbacks.

For kernels which support recovery callbacks but will miss this patch,
ocfs2 will continue to use the older API and would still be able to
mount the filesystem.

[akpm@linux-foundation.org: simplify]
[sfr@canb.auug.org.au: VERIFY_OCTAL_PERMISSIONS fix up]
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:54 -07:00
Junxiao Bi
ded2cf7141 ocfs2: dlm: fix recovery hung
There is a race window in dlm_do_recovery() between dlm_remaster_locks()
and dlm_reset_recovery() when the recovery master nearly finish the
recovery process for a dead node.  After the master sends FINALIZE_RECO
message in dlm_remaster_locks(), another node may become the recovery
master for another dead node, and then send the BEGIN_RECO message to
all the nodes included the old master, in the handler of this message
dlm_begin_reco_handler() of old master, dlm->reco.dead_node and
dlm->reco.new_master will be set to the second dead node and the new
master, then in dlm_reset_recovery(), these two variables will be reset
to default value.  This will cause new recovery master can not finish
the recovery process and hung, at last the whole cluster will hung for
recovery.

old recovery master:                                 new recovery master:
dlm_remaster_locks()
                                                  become recovery master for
                                                  another dead node.
                                                  dlm_send_begin_reco_message()
dlm_begin_reco_handler()
{
 if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
  return -EAGAIN;
 }
 dlm_set_reco_master(dlm, br->node_idx);
 dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
 dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
 dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}
                                                  will hang in dlm_remaster_locks() for
                                                  request dlm locks info

Before send FINALIZE_RECO message, recovery master should set
DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done,
this can break the race windows as the BEGIN_RECO messages will not be
handled before DLM_RECO_STATE_FINALIZE flag is cleared.

A similar race may happen between new recovery master and normal node
which is in dlm_finalize_reco_handler(), also fix it.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:54 -07:00
Junxiao Bi
34aa8dac48 ocfs2: dlm: fix lock migration crash
This issue was introduced by commit 800deef3f6 ("ocfs2: use
list_for_each_entry where benefical") in 2007 where it replaced
list_for_each with list_for_each_entry.  The variable "lock" will point
to invalid data if "tmpq" list is empty and a panic will be triggered
due to this.  Sunil advised reverting it back, but the old version was
also not right.  At the end of the outer for loop, that
list_for_each_entry will also set "lock" to an invalid data, then in the
next loop, if the "tmpq" list is empty, "lock" will be an stale invalid
data and cause the panic.  So reverting the list_for_each back and reset
"lock" to NULL to fix this issue.

Another concern is that this seemes can not happen because the "tmpq"
list should not be empty.  Let me describe how.

old lock resource owner(node 1):                                  migratation target(node 2):
image there's lockres with a EX lock from node 2 in
granted list, a NR lock from node x with convert_type
EX in converting list.
dlm_empty_lockres() {
 dlm_pick_migration_target() {
   pick node 2 as target as its lock is the first one
   in granted list.
 }
 dlm_migrate_lockres() {
   dlm_mark_lockres_migrating() {
     res->state |= DLM_LOCK_RES_BLOCK_DIRTY;
     wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res));
	 //after the above code, we can not dirty lockres any more,
     // so dlm_thread shuffle list will not run
                                                                   downconvert lock from EX to NR
                                                                   upconvert lock from NR to EX
<<< migration may schedule out here, then
<<< node 2 send down convert request to convert type from EX to
<<< NR, then send up convert request to convert type from NR to
<<< EX, at this time, lockres granted list is empty, and two locks
<<< in the converting list, node x up convert lock followed by
<<< node 2 up convert lock.

	 // will set lockres RES_MIGRATING flag, the following
	 // lock/unlock can not run
     dlm_lockres_release_ast(dlm, res);
   }

   dlm_send_one_lockres()
                                                                 dlm_process_recovery_data()
                                                                   for (i=0; i<mres->num_locks; i++)
                                                                     if (ml->node == dlm->node_num)
                                                                       for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) {
                                                                        list_for_each_entry(lock, tmpq, list)
                                                                        if (lock) break; <<< lock is invalid as grant list is empty.
                                                                       }
                                                                       if (lock->ml.node != ml->node)
                                                                         BUG() >>> crash here
 }

I see the above locks status from a vmcore of our internal bug.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:54 -07:00
Darrick J. Wong
2931cdcb49 ocfs2: improve fsync efficiency and fix deadlock between aio_write and sync_file
Currently, ocfs2_sync_file grabs i_mutex and forces the current journal
transaction to complete.  This isn't terribly efficient, since sync_file
really only needs to wait for the last transaction involving that inode
to complete, and this doesn't require i_mutex.

Therefore, implement the necessary bits to track the newest tid
associated with an inode, and teach sync_file to wait for that instead
of waiting for everything in the journal to commit.  Furthermore, only
issue the flush request to the drive if jbd2 hasn't already done so.

This also eliminates the deadlock between ocfs2_file_aio_write() and
ocfs2_sync_file().  aio_write takes i_mutex then calls
ocfs2_aiodio_wait() to wait for unaligned dio writes to finish.
However, if that dio completion involves calling fsync, then we can get
into trouble when some ocfs2_sync_file tries to take i_mutex.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:53 -07:00
joyce.xue
a75fe48cad ocfs2: remove unused variable uuid_net_key in ocfs2_initialize_super
Variable uuid_net_key in ocfs2_initialize_super() is not used.  Clean it
up.

Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:53 -07:00
Wengang Wang
c18ceab012 ocfs2: change ip_unaligned_aio to of type mutex from atomit_t
There is a problem that waitqueue_active() may check stale data thus miss
a wakeup of threads waiting on ip_unaligned_aio.

The valid value of ip_unaligned_aio is only 0 and 1 so we can change it to
be of type mutex thus the above prolem is avoid.  Another benifit is that
mutex which works as FIFO is fairer than wake_up_all().

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:53 -07:00
Zongxun Wang
181a9a043b ocfs2: fix null pointer dereference when access dlm_state before launching dlm thread
When mounting an ocfs2 volume, it will firstly generate a file
/sys/kernel/debug/o2dlm/<uuid>/dlm_state, and then launch the dlm thread.
So the following situation will cause a null pointer dereference.
dlm_debug_init -> access file dlm_state which will call dlm_state_print ->
dlm_launch_thread

Move dlm_debug_init after dlm_launch_thread and dlm_launch_recovery_thread
can fix this issue.

Signed-off-by: Zongxun Wang <wangzongxun@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:53 -07:00
Jan Kara
d507816b58 fanotify: move unrelated handling from copy_event_to_user()
Move code moving event structure to access_list from copy_event_to_user()
to fanotify_read() where it is more logical (so that we can immediately
see in the main loop that we either move the event to a different list
or free it).  Also move special error handling for permission events
from copy_event_to_user() to the main loop to have it in one place with
error handling for normal events.  This makes copy_event_to_user()
really only copy the event to user without any side effects.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:51 -07:00
Jan Kara
d8aaab4f61 fanotify: reorganize loop in fanotify_read()
Swap the error / "read ok" branches in the main loop of fanotify_read().
We will grow the "read ok" part in the next patch and this makes the
indentation easier.  Also it is more common to have error conditions
inside an 'if' instead of the fast path.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:51 -07:00
Jan Kara
9573f79355 fanotify: convert access_mutex to spinlock
access_mutex is used only to guard operations on access_list.  There's
no need for sleeping within this lock so just make a spinlock out of it.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:51 -07:00
Jan Kara
f083441ba8 fanotify: use fanotify event structure for permission response processing
Currently, fanotify creates new structure to track the fact that
permission event has been reported to userspace and someone is waiting
for a response to it.  As event structures are now completely in the
hands of each notification framework, we can use the event structure for
this tracking instead of allocating a new structure.

Since this makes the event structures for normal events and permission
events even more different and the structures have different lifetime
rules, we split them into two separate structures (where permission
event structure contains the structure for a normal event).  This makes
normal events 8 bytes smaller and the code a tad bit cleaner.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:51 -07:00
Jan Kara
3298cf37be fanotify: remove useless bypass_perm check
The prepare_for_access_response() function checks whether
group->fanotify_data.bypass_perm is set.  However this test can never be
true because prepare_for_access_response() is called only from
fanotify_read() which means fanotify group is alive with an active fd
while bypass_perm is set from fanotify_release() when all file
descriptors pointing to the group are closed and the group is going
away.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:51 -07:00
Fabian Frederick
ddae82d8e6 fs/freevxfs/vxfs_lookup.c: update function comment
nameidata was replaced by flags in commit 00cd8dd3bf ("stop passing
nameidata to ->lookup()").

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:50 -07:00
Fabian Frederick
9ee108b2c6 fs/cifs/cifsfs.c: add __init to cifs_init_inodecache()
cifs_init_inodecache is only called by __init init_cifs.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:50 -07:00
Jan Kara
5acda9d12d bdi: avoid oops on device removal
After commit 839a8e8660 ("writeback: replace custom worker pool
implementation with unbound workqueue") when device is removed while we
are writing to it we crash in bdi_writeback_workfn() ->
set_worker_desc() because bdi->dev is NULL.

This can happen because even though bdi_unregister() cancels all pending
flushing work, nothing really prevents new ones from being queued from
balance_dirty_pages() or other places.

Fix the problem by clearing BDI_registered bit in bdi_unregister() and
checking it before scheduling of any flushing work.

Fixes: 839a8e8660

Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:49 -07:00
Derek Basehore
6ca738d60c backing_dev: fix hung task on sync
bdi_wakeup_thread_delayed() used the mod_delayed_work() function to
schedule work to writeback dirty inodes.  The problem with this is that
it can delay work that is scheduled for immediate execution, such as the
work from sync_inodes_sb().  This can happen since mod_delayed_work()
can now steal work from a work_queue.  This fixes the problem by using
queue_delayed_work() instead.  This is a regression caused by commit
839a8e8660 ("writeback: replace custom worker pool implementation with
unbound workqueue").

The reason that this causes a problem is that laptop-mode will change
the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default.
In the case that bdi_wakeup_thread_delayed() races with
sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung
task.  Even if dirty_writeback_centisecs is not long enough to cause a
hung task, we still don't want to delay sync for that long.

We fix the problem by using queue_delayed_work() when we want to
schedule writeback sometime in future.  This function doesn't change the
timer if it is already armed.

For the same reason, we also change bdi_writeback_workfn() to
immediately queue the work again in the case that the work_list is not
empty.  The same problem can happen if the sync work is run on the
rescue worker.

[jack@suse.cz: update changelog, add comment, use bdi_wakeup_thread_delayed()]
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zento.linux.org.uk>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Luigi Semenzato <semenzato@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:49 -07:00
Dave Chinner
a6cf33bc56 Merge branch 'xfs-bug-fixes-for-3.15-3' into for-next 2014-04-04 08:07:35 +11:00
Mark Tinguely
c88547a811 xfs: fix directory hash ordering bug
Commit f5ea1100 ("xfs: add CRCs to dir2/da node blocks") introduced
in 3.10 incorrectly converted the btree hash index array pointer in
xfs_da3_fixhashpath(). It resulted in the the current hash always
being compared against the first entry in the btree rather than the
current block index into the btree block's hash entry array. As a
result, it was comparing the wrong hashes, and so could misorder the
entries in the btree.

For most cases, this doesn't cause any problems as it requires hash
collisions to expose the ordering problem. However, when there are
hash collisions within a directory there is a very good probability
that the entries will be ordered incorrectly and that actually
matters when duplicate hashes are placed into or removed from the
btree block hash entry array.

This bug results in an on-disk directory corruption and that results
in directory verifier functions throwing corruption warnings into
the logs. While no data or directory entries are lost, access to
them may be compromised, and attempts to remove entries from a
directory that has suffered from this corruption may result in a
filesystem shutdown.  xfs_repair will fix the directory hash
ordering without data loss occuring.

[dchinner: wrote useful a commit message]

cc: <stable@vger.kernel.org>
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-04-04 07:10:49 +11:00
Linus Torvalds
32d01dc7be Merge branch 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "A lot updates for cgroup:

   - The biggest one is cgroup's conversion to kernfs.  cgroup took
     after the long abandoned vfs-entangled sysfs implementation and
     made it even more convoluted over time.  cgroup's internal objects
     were fused with vfs objects which also brought in vfs locking and
     object lifetime rules.  Naturally, there are places where vfs rules
     don't fit and nasty hacks, such as credential switching or lock
     dance interleaving inode mutex and cgroup_mutex with object serial
     number comparison thrown in to decide whether the operation is
     actually necessary, needed to be employed.

     After conversion to kernfs, internal object lifetime and locking
     rules are mostly isolated from vfs interactions allowing shedding
     of several nasty hacks and overall simplification.  This will also
     allow implmentation of operations which may affect multiple cgroups
     which weren't possible before as it would have required nesting
     i_mutexes.

   - Various simplifications including dropping of module support,
     easier cgroup name/path handling, simplified cgroup file type
     handling and task_cg_lists optimization.

   - Prepatory changes for the planned unified hierarchy, which is still
     a patchset away from being actually operational.  The dummy
     hierarchy is updated to serve as the default unified hierarchy.
     Controllers which aren't claimed by other hierarchies are
     associated with it, which BTW was what the dummy hierarchy was for
     anyway.

   - Various fixes from Li and others.  This pull request includes some
     patches to add missing slab.h to various subsystems.  This was
     triggered xattr.h include removal from cgroup.h.  cgroup.h
     indirectly got included a lot of files which brought in xattr.h
     which brought in slab.h.

  There are several merge commits - one to pull in kernfs updates
  necessary for converting cgroup (already in upstream through
  driver-core), others for interfering changes in the fixes branch"

* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (74 commits)
  cgroup: remove useless argument from cgroup_exit()
  cgroup: fix spurious lockdep warning in cgroup_exit()
  cgroup: Use RCU_INIT_POINTER(x, NULL) in cgroup.c
  cgroup: break kernfs active_ref protection in cgroup directory operations
  cgroup: fix cgroup_taskset walking order
  cgroup: implement CFTYPE_ONLY_ON_DFL
  cgroup: make cgrp_dfl_root mountable
  cgroup: drop const from @buffer of cftype->write_string()
  cgroup: rename cgroup_dummy_root and related names
  cgroup: move ->subsys_mask from cgroupfs_root to cgroup
  cgroup: treat cgroup_dummy_root as an equivalent hierarchy during rebinding
  cgroup: remove NULL checks from [pr_cont_]cgroup_{name|path}()
  cgroup: use cgroup_setup_root() to initialize cgroup_dummy_root
  cgroup: reorganize cgroup bootstrapping
  cgroup: relocate setting of CGRP_DEAD
  cpuset: use rcu_read_lock() to protect task_cs()
  cgroup_freezer: document freezer_fork() subtleties
  cgroup: update cgroup_transfer_tasks() to either succeed or fail
  cgroup: drop task_lock() protection around task->cgroups
  cgroup: update how a newly forked task gets associated with css_set
  ...
2014-04-03 13:05:42 -07:00
Dan Carpenter
805eeb8e04 xfs: extra semi-colon breaks a condition
There were some extra semi-colons here which mean that we return true
unintentionally.

Fixes: a49935f200 ('xfs: xfs_check_page_type buffer checks need help')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-04-04 06:56:30 +11:00
Rashika Kheria
0961f02a37 fs: Mark functions as static in exofs/ore_raid.c
Mark functions as static in exofs/ore_raid.c because they are not used
outside this file.

This also eliminates the following warning in exofs/ore_raid.c:
fs/exofs/ore_raid.c:24:14: warning: no previous prototype for _raid_page_alloc [-Wmissing-prototypes]
fs/exofs/ore_raid.c:29:6: warning: no previous prototype for _raid_page_free [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2014-04-03 11:40:55 +03:00
Rashika Kheria
af8d0cc0d2 fs: Mark function as static in exofs/super.c
Mark function as static in exofs/super.c because it is not used outside
this file.

This also eliminates the following warning in exofs/super.c:
 fs/exofs/super.c:546:5: warning: no previous prototype \
 for __alloc_dev_table[-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2014-04-03 11:36:42 +03:00
Yan, Zheng
c137a32a40 ceph: print inode number for LOOKUPINO request
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-03 10:33:54 +08:00
Yan, Zheng
19913b4eac ceph: add get_name() NFS export callback
Use the newly introduced LOOKUPNAME MDS request to connect child
inode to its parent directory.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-03 10:33:53 +08:00
Yan, Zheng
8996f4f23d ceph: fix ceph_fh_to_parent()
ceph_fh_to_parent() returns dentry that corresponds to the 'ino' field
of struct ceph_nfs_confh. This is wrong, it should return dentry that
corresponds to the 'parent_ino' field.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-03 10:33:53 +08:00
Yan, Zheng
9017c2ec78 ceph: add get_parent() NFS export callback
The callback uses LOOKUPPARENT MDS request to find parent.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-03 10:33:53 +08:00
Yan, Zheng
4f32b42dca ceph: simplify ceph_fh_to_dentry()
MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way.
So __cfh_to_dentry() is redundant.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-03 10:33:53 +08:00
Yunchuan Wen
f1fc4fee3b ceph: fscache: Wait for completion of object initialization
The object store limit needs to be updated after writing,
and this can be done provided the corresponding object has already
been initialized. Current object initialization is done asynchrously,
which introduce a race if a file is opened, then immediately followed
by a writing, the initialization may have not completed, the code will
reach the ASSERT in fscache_submit_exclusive_op() to cause kernel
bug.

Tested-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Min Chen <minchen@ubuntukylin.com>
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
2014-04-03 10:33:53 +08:00
Yunchuan Wen
32d3e148dd ceph: fscache: Update object store limit after file writing
Synchronize object->store_limit[_l] with new inode->i_size after file writing.

Tested-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Min Chen <minchen@ubuntukylin.com>
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
2014-04-03 10:33:53 +08:00
Yunchuan Wen
020c4bddc0 ceph: fscache: add an interface to synchronize object store limit
Add an interface to explicitly synchronize object->store_limit[_l]
with inode->i_size

Tested-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Min Chen <minchen@ubuntukylin.com>
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
2014-04-03 10:33:53 +08:00
Sage Weil
4b58c9b19b ceph: do not set r_old_dentry_dir on link()
This is racy--we do not know whather d_parent has changed out from
underneath us because i_mutex is not held on the source inode's directory.

Also, taking this reference is useless.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-03 10:33:53 +08:00
Sage Weil
844d87c332 ceph: do not assume r_old_dentry[_dir] always set together
Do not assume that r_old_dentry implies that r_old_dentry_dir is also
true.  Separate out the ref cleanup and make the debugs dump behave when
it is NULL.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-03 10:33:53 +08:00
Sage Weil
752c8bdcfe ceph: do not chain inode updates to parent fsync
The fsync(dirfd) only covers namespace operations, not inode updates.
We do not need to cover setattr variants or O_TRUNC.

Reported-by: Al Viro <viro@xeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-03 10:33:52 +08:00
Sage Weil
180061a58c ceph: avoid useless ceph_get_dentry_parent_inode() in ceph_rename()
This is just old_dir; no reason to abuse the dcache pointers.

Reported-by: Al Viro <viro.zeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-03 10:33:52 +08:00
Yan, Zheng
15289dc85b ceph: let MDS adjust readdir 'frag'
If readdir 'frag' is adjusted, readdir 'offset' should be reset.
Otherwise some dentries may be lost when readdir and fragmenting
directory happen at the some.

Another way to fix this issue is let MDS adjust readdir 'frag'.
The code that handles MDS reply reset the readdir 'offset' if
the readdir reply is different than the requested one.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-03 10:33:52 +08:00
Yan, Zheng
dcd3cc05e5 ceph: fix reset_readdir()
When changing readdir postion, fi->next_offset should be set to 0
if the new postion is not in the first dirfrag.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-03 10:33:52 +08:00
Yan, Zheng
f049420607 ceph: fix ceph_dir_llseek()
Comparing offset with inode->i_sb->s_maxbytes doesn't make sense for
directory. For a fragmented directory, offset (frag_t, off) can be
larger than inode->i_sb->s_maxbytes.

At the very beginning of ceph_dir_llseek(), local variable old_offset
is initialized to parameter offset. This doesn't make sense neither.
Old_offset should be ceph_make_fpos(fi->frag, fi->next_offset).

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-03 10:33:52 +08:00
Linus Torvalds
159d8133d0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science -- mostly documentation and comment updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  sparse: fix comment
  doc: fix double words
  isdn: capi: fix "CAPI_VERSION" comment
  doc: DocBook: Fix typos in xml and template file
  Bluetooth: add module name for btwilink
  driver core: unexport static function create_syslog_header
  mmc: core: typo fix in printk specifier
  ARM: spear: clean up editing mistake
  net-sysfs: fix comment typo 'CONFIG_SYFS'
  doc: Insert MODULE_ in module-signing macros
  Documentation: update URL to hfsplus Technote 1150
  gpio: update path to documentation
  ixgbe: Fix format string in ixgbe_fcoe.
  Kconfig: Remove useless "default N" lines
  user_namespace.c: Remove duplicated word in comment
  CREDITS: fix formatting
  treewide: Fix typo in Documentation/DocBook
  mm: Fix warning on make htmldocs caused by slab.c
  ata: ata-samsung_cf: cleanup in header file
  idr: remove unused prototype of idr_free()
2014-04-02 16:23:38 -07:00
Jeff Mahoney
01d8885785 reiserfs: fix race in readdir
jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2)

The -ENOENT is due to readdir calling dir_emit on the same entry twice.

If the dir_emit callback sleeps and the tree is changed underneath us,
we won't be able to trust deh_offset(deh) anymore. We need to save
next_pos before we might sleep so we can find the next entry.

CC: stable@vger.kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-04-03 00:06:14 +02:00
Linus Torvalds
b9f2b21a32 Devicetree changes for v3.15
Updates to devicetree core code. This branch contains the following notable changes:
 * Add reserved memory binding
 * Make struct device_node a kobject and remove legacy /proc/device-tree
 * ePAPR conformance fixes
 * Update in-kernel DTC copy to version v1.4.0
 * Preparation changes for dynamic device tree overlays
 * minor bug fixes and documentation changes
 
 The most significant change in this branch is the conversion of struct
 device_node to be a kobject that is exposed via sysfs and removal of the
 old /proc/device-tree code. This simplifies the device tree handling
 code and tightens up the lifecycle on device tree nodes.
 
 [updated: added fix for dangling select PROC_DEVICETREE]
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOyNwAAoJEMWQL496c2LNZY0QAIreUrpo3/hKRau61EDPXkOA
 UFRyPUHD0k/dNXWWDbTfvKH/nAfzdVwejhePqEWiODiFOFkq7JyQlMKPA+CZuZj0
 ygN4215A1yj/hDf6JRD5Zn4WGpawDt9InlbZSps6P5dd8voV5t5dz6uzz+Y7uqaK
 CAjTDlBSmxEen5vRHiHQgKv74au/+b9yfSURjPQVWg46+wl3WJwjsdzerphm4unW
 tpEr8zkIsm51mqqAx4penIuiovh7+L2J5v4BFeg8o+kaZEuZpVxLHJPOuBd5hdom
 zeqEIj3AqHTh5suYIHe4aAbZ2wMP3kYGgkPGwfWLnwLyULxalcCtGZeaCi9nwTFj
 Fdj+7f17ocrt5mif0f5Deufi1LqJsDjhY6G9p7HuV7Y9hsMILpJIUoGENPji+TWj
 BA4L45eaPmNYdKJytEtFD7F2WnXeHZ6fDtYho/39DWW+Bt16IFX85T199irhxGG4
 byN6LRaahk2UeycSXkQHAlWOQHqzBcJJAkQLN2iahzyYRr9Dy+VI2E9clm53m49O
 YQYcONdUlMYrtfRwJpbB9XHM0HgZUvg0LT5z/iHQs9uJtoo33Oj+zxFixyZLQ9Dq
 qyLqQWEpV9gFLAo9tpf56gffkLiJRsHkX4UJ6oTtj4DY1WWU9H81jjCvv/7flzp/
 8ZyyZzANQf1DZ9kqO2v+
 =lyA5
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux

Pull devicetree changes from Grant Likely:
 "Updates to devicetree core code.  This branch contains the following
  notable changes:

   - add reserved memory binding
   - make struct device_node a kobject and remove legacy
     /proc/device-tree
   - ePAPR conformance fixes
   - update in-kernel DTC copy to version v1.4.0
   - preparatory changes for dynamic device tree overlays
   - minor bug fixes and documentation changes

  The most significant change in this branch is the conversion of struct
  device_node to be a kobject that is exposed via sysfs and removal of
  the old /proc/device-tree code.  This simplifies the device tree
  handling code and tightens up the lifecycle on device tree nodes.

  [updated: added fix for dangling select PROC_DEVICETREE]"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits)
  dt: Remove dangling "select PROC_DEVICETREE"
  of: Add support for ePAPR "stdout-path" property
  of: device_node kobject lifecycle fixes
  of: only scan for reserved mem when fdt present
  powerpc: add support for reserved memory defined by device tree
  arm64: add support for reserved memory defined by device tree
  of: add missing major vendors
  of: add vendor prefix for SMSC
  of: remove /proc/device-tree
  of/selftest: Add self tests for manipulation of properties
  of: Make device nodes kobjects so they show up in sysfs
  arm: add support for reserved memory defined by device tree
  drivers: of: add support for custom reserved memory drivers
  drivers: of: add initialization code for dynamic reserved memory
  drivers: of: add initialization code for static reserved memory
  of: document bindings for reserved-memory nodes
  Revert "of: fix of_update_property()"
  kbuild: dtbs_install: new make target
  ARM: mvebu: Allows to get the SoC ID even without PCI enabled
  of: Allows to use the PCI translator without the PCI core
  ...
2014-04-02 14:27:15 -07:00
Linus Torvalds
7125764c5d Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull compat time conversion changes from Peter Anvin:
 "Despite the branch name this is really neither an x86 nor an
  x32-specific patchset, although it the implementation of the
  discussions that followed the x32 security hole a few months ago.

  This removes get/put_compat_timespec/val() and replaces them with
  compat_get/put_timespec/val() which are savvy as to the current status
  of COMPAT_USE_64BIT_TIME.

  It removes several unused and/or incorrect/misleading functions (like
  compat_put_timeval_convert which doesn't in fact do any conversion)
  and also replaces several open-coded implementations what is now
  called compat_convert_timespec() with that function"

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  compat: Fix sparse address space warnings
  compat: Get rid of (get|put)_compat_time(val|spec)
2014-04-02 12:51:41 -07:00
Rajat Jain
f3846266f5 fuse: fix "uninitialized variable" warning
Fix the following warning:

In file included from include/linux/fs.h:16:0,
                 from fs/fuse/fuse_i.h:13,
                 from fs/fuse/file.c:9:
fs/fuse/file.c: In function 'fuse_file_poll':
include/linux/rbtree.h:82:28: warning: 'parent' may be used
uninitialized in this function [-Wmaybe-uninitialized]
fs/fuse/file.c:2592:27: note: 'parent' was declared here

Signed-off-by: Rajat Jain <rajatxjain@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:51 +02:00
Pavel Emelyanov
4d99ff8f12 fuse: Turn writeback cache on
Introduce a bit kernel and userspace exchange between each-other on
the init stage and turn writeback on if the userspace want this and
mount option 'allow_wbcache' is present (controlled by fusermount).

Also add each writable file into per-inode write list and call the
generic_file_aio_write to make use of the Linux page cache engine.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:50 +02:00
Pavel Emelyanov
ea8cd33390 fuse: Fix O_DIRECT operations vs cached writeback misorder
The problem is:

1. write cached data to a file
2. read directly from the same file (via another fd)

The 2nd operation may read stale data, i.e. the one that was in a file
before the 1st op. Problem is in how fuse manages writeback.

When direct op occurs the core kernel code calls filemap_write_and_wait
to flush all the cached ops in flight. But fuse acks the writeback right
after the ->writepages callback exits w/o waiting for the real write to
happen. Thus the subsequent direct op proceeds while the real writeback
is still in flight. This is a problem for backends that reorder operation.

Fix this by making the fuse direct IO callback explicitly wait on the
in-flight writeback to finish.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:50 +02:00
Maxim Patlasov
fe38d7df23 fuse: fuse_flush() should wait on writeback
The aim of .flush fop is to hint file-system that flushing its state or caches
or any other important data to reliable storage would be desirable now.
fuse_flush() passes this hint by sending FUSE_FLUSH request to userspace.
However, dirty pages and pages under writeback may be not visible to userspace
yet if we won't ensure it explicitly.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:50 +02:00
Pavel Emelyanov
6b12c1b37e fuse: Implement write_begin/write_end callbacks
The .write_begin and .write_end are requiered to use generic routines
(generic_file_aio_write --> ... --> generic_perform_write) for buffered
writes.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:49 +02:00
Maxim Patlasov
482fce55d2 fuse: restructure fuse_readpage()
Move the code filling and sending read request to a separate function. Future
patches will use it for .write_begin -- partial modification of a page
requires reading the page from the storage very similarly to what fuse_readpage
does.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:49 +02:00
Pavel Emelyanov
e7cc133c37 fuse: Flush files on wb close
Any write request requires a file handle to report to the userspace. Thus
when we close a file (and free the fuse_file with this info) we have to
flush all the outstanding dirty pages.

filemap_write_and_wait() is enough because every page under fuse writeback
is accounted in ff->count. This delays actual close until all fuse wb is
completed.

In case of "write cache" turned off, the flush is ensured by fuse_vma_close().

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:49 +02:00
Maxim Patlasov
b0aa760652 fuse: Trust kernel i_mtime only
Let the kernel maintain i_mtime locally:
 - clear S_NOCMTIME
 - implement i_op->update_time()
 - flush mtime on fsync and last close
 - update i_mtime explicitly on truncate and fallocate

Fuse inode flag FUSE_I_MTIME_DIRTY serves as indication that local i_mtime
should be flushed to the server eventually.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:48 +02:00
Pavel Emelyanov
8373200b12 fuse: Trust kernel i_size only
Make fuse think that when writeback is on the inode's i_size is always
up-to-date and not update it with the value received from the userspace.
This is done because the page cache code may update i_size without letting
the FS know.

This assumption implies fixing the previously introduced short-read helper --
when a short read occurs the 'hole' is filled with zeroes.

fuse_file_fallocate() is also fixed because now we should keep i_size up to
date, so it must be updated if FUSE_FALLOCATE request succeeded.

Signed-off-by: Maxim V. Patlasov <MPatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:48 +02:00
Pavel Emelyanov
d5cd66c58e fuse: Connection bit for enabling writeback
Off (0) by default. Will be used in the next patches and will be turned
on at the very end.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:48 +02:00
Pavel Emelyanov
a92adc824e fuse: Prepare to handle short reads
A helper which gets called when read reports less bytes than was requested.
See patch "trust kernel i_size only" for details.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:47 +02:00
Pavel Emelyanov
650b22b941 fuse: Linking file to inode helper
When writeback is ON every writeable file should be in per-inode write list,
not only mmap-ed ones. Thus introduce a helper for this linkage.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02 15:38:47 +02:00
Al Viro
58bfab395b ocfs2_file_aio_write(): switch to generic_perform_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:37 -04:00
Al Viro
aec605f429 ceph_aio_write(): switch to generic_perform_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:37 -04:00
Al Viro
0a64bc2c04 xfs_file_buffered_aio_write(): switch to generic_perform_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:36 -04:00
Al Viro
5cb6c6c7eb generic_file_direct_write(): get rid of ppos argument
always equal to &iocb->ki_pos.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:35 -04:00
Al Viro
867c4f9329 btrfs_file_aio_write(): get rid of ppos
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:35 -04:00
Al Viro
fcacafd269 kill the 5th argument of generic_file_buffered_write()
same story - it's &iocb->ki_pos in all cases

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:34 -04:00
Al Viro
41fc56d573 kill the 4th argument of __generic_file_aio_write()
It's always equal to &iocb->ki_pos, where iocb is the value of the 1st
argument.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:34 -04:00
Al Viro
920220c111 ocfs2: don't open-code kernel_recvmsg()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:32 -04:00
Al Viro
86d564c84c constify blk_rq_map_user_iov() and friends
sg_iovec array passed to it can be const

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:31 -04:00
Al Viro
66f5dcef13 ocfs2: don't open-code kernel_sendmsg()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:30 -04:00
Al Viro
ec69557982 read_code(): go through vfs_read() instead of calling the method directly
... and don't skip on sanity checks.  It's *not* a hot path, TYVM
(a couple of calls per a.out execve(), for pity sake) and headers of
random a.out binary are not to be trusted.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:24 -04:00
Al Viro
0165e8100b fold cifs_iovec_read() into its (only) caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:24 -04:00
Al Viro
7f25bba819 cifs_iovec_read: keep iov_iter between the calls of cifs_readdata_to_iov()
... we are doing them on adjacent parts of file, so what happens is that
each subsequent call works to rebuild the iov_iter to exact state it
had been abandoned in by previous one.  Just keep it through the entire
cifs_iovec_read().  And use copy_page_to_iter() instead of doing
kmap/copy_to_user/kunmap manually...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:23 -04:00
Al Viro
6130f5315e switch vmsplice_to_user() to copy_page_to_iter()
I've switched the sanity checks on iovec to rw_copy_check_uvector();
we might need to do a local analog, if any behaviour differences are
not actually bugfixes here...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:23 -04:00
Al Viro
637b58c288 switch pipe_read() to copy_page_to_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:22 -04:00
Al Viro
74027f4a18 cifs_iovec_read(): resubmit shouldn't restart the loop
... by that point the request we'd just resent is in the
head of the list anyway.  Just return to the beginning of
the loop body...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:22 -04:00
Al Viro
9e8c2af96e callers of iov_copy_from_user_atomic() don't need pagecache_disable()
... it does that itself (via kmap_atomic())

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:20 -04:00
Al Viro
c186afb4db switch ->is_partially_uptodate() to saner arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:19 -04:00
Al Viro
fbb32750a6 pipe: kill ->map() and ->unmap()
all pipe_buffer_operations have the same instances of those...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:19 -04:00
Al Viro
58bda1da4b fuse/dev: use atomic maps
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:18 -04:00
David Howells
8ffcb32e05 VFS: Make delayed_free() call free_vfsmnt()
Make delayed_free() call free_vfsmnt() so that we don't have two functions
doing the same job.  This requires the calls to mnt_free_id() in free_vfsmnt()
to be moved into the callers of that function.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:18 -04:00
Al Viro
81c5a68478 cifs: ->rename() without ->lookup() makes no sense
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:17 -04:00
Al Viro
627bf81ac6 get rid of pointless checks for NULL ->i_op
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:16 -04:00
Al Viro
05faf3169f ntfs: don't put NULL into ->i_op/->i_fop
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:16 -04:00
Al Viro
5d826c847b new helper: readlink_copy()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:15 -04:00
Al Viro
7f4b36f9bb get rid of files_defer_init()
the only thing it's doing these days is calculation of
upper limit for fs.nr_open sysctl and that can be done
statically

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:14 -04:00
Al Viro
4d35950734 namei.c: move EXPORT_SYMBOL to corresponding definitions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:14 -04:00
Al Viro
0018d8bfc4 get_write_access() is inlined, exporting it is pointless
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:13 -04:00
Al Viro
3f4d5a0007 tidy do_dentry_open() up a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:13 -04:00
Al Viro
83f936c75e mark struct file that had write access grabbed by open()
new flag in ->f_mode - FMODE_WRITER.  Set by do_dentry_open() in case
when it has grabbed write access, checked by __fput() to decide whether
it wants to drop the sucker.  Allows to stop bothering with mnt_clone_write()
in alloc_file(), along with fewer special_file() checks.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:12 -04:00
Al Viro
0ccb286346 fold __get_file_write_access() into its only caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:12 -04:00
Al Viro
4597e695b8 get rid of DEBUG_WRITECOUNT
it only makes control flow in __fput() and friends more convoluted.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:12 -04:00
Al Viro
dd20908a8a don't bother with {get,put}_write_access() on non-regular files
it's pointless and actually leads to wrong behaviour in at least one
moderately convoluted case (pipe(), close one end, try to get to
another via /proc/*/fd and run into ETXTBUSY).

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:11 -04:00
Al Viro
44ba8406d0 ncpfs: switch to sockfd_lookup()/sockfd_put()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:11 -04:00
Al Viro
c7999c3627 reduce m_start() cost...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:09 -04:00
Al Viro
f2ebb3a921 smarter propagate_mnt()
The current mainline has copies propagated to *all* nodes, then
tears down the copies we made for nodes that do not contain
counterparts of the desired mountpoint.  That sets the right
propagation graph for the copies (at teardown time we move
the slaves of removed node to a surviving peer or directly
to master), but we end up paying a fairly steep price in
useless allocations.  It's fairly easy to create a situation
where N calls of mount(2) create exactly N bindings, with
O(N^2) vfsmounts allocated and freed in process.

Fortunately, it is possible to avoid those allocations/freeings.
The trick is to create copies in the right order and find which
one would've eventually become a master with the current algorithm.
It turns out to be possible in O(nodes getting propagation) time
and with no extra allocations at all.

One part is that we need to make sure that eventual master will be
created before its slaves, so we need to walk the propagation
tree in a different order - by peer groups.  And iterate through
the peers before dealing with the next group.

Another thing is finding the (earlier) copy that will be a master
of one we are about to create; to do that we are (temporary) marking
the masters of mountpoints we are attaching the copies to.

Either we are in a peer of the last mountpoint we'd dealt with,
or we have the following situation: we are attaching to mountpoint M,
the last copy S_0 had been attached to M_0 and there are sequences
S_0...S_n, M_0...M_n such that S_{i+1} is a master of S_{i},
S_{i} mounted on M{i} and we need to create a slave of the first S_{k}
such that M is getting propagation from M_{k}.  It means that the master
of M_{k} will be among the sequence of masters of M.  On the
other hand, the nearest marked node in that sequence will either
be the master of M_{k} or the master of M_{k-1} (the latter -
in the case if M_{k-1} is a slave of something M gets propagation
from, but in a wrong peer group).

So we go through the sequence of masters of M until we find
a marked one (P).  Let N be the one before it.  Then we go through
the sequence of masters of S_0 until we find one (say, S) mounted
on a node D that has P as master and check if D is a peer of N.
If it is, S will be the master of new copy, if not - the master of S
will be.

That's it for the hard part; the rest is fairly simple.  Iterator
is in next_group(), handling of one prospective mountpoint is
propagate_one().

It seems to survive all tests and gives a noticably better performance
than the current mainline for setups that are seriously using shared
subtrees.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:08 -04:00
Linus Torvalds
7a48837732 Merge branch 'for-3.15/core' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
 "This is the pull request for the core block IO bits for the 3.15
  kernel.  It's a smaller round this time, it contains:

   - Various little blk-mq fixes and additions from Christoph and
     myself.

   - Cleanup of the IPI usage from the block layer, and associated
     helper code.  From Frederic Weisbecker and Jan Kara.

   - Duplicate code cleanup in bio-integrity from Gu Zheng.  This will
     give you a merge conflict, but that should be easy to resolve.

   - blk-mq notify spinlock fix for RT from Mike Galbraith.

   - A blktrace partial accounting bug fix from Roman Pen.

   - Missing REQ_SYNC detection fix for blk-mq from Shaohua Li"

* 'for-3.15/core' of git://git.kernel.dk/linux-block: (25 commits)
  blk-mq: add REQ_SYNC early
  rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock
  blk-mq: support partial I/O completions
  blk-mq: merge blk_mq_insert_request and blk_mq_run_request
  blk-mq: remove blk_mq_alloc_rq
  blk-mq: don't dump CPU -> hw queue map on driver load
  blk-mq: fix wrong usage of hctx->state vs hctx->flags
  blk-mq: allow blk_mq_init_commands() to return failure
  block: remove old blk_iopoll_enabled variable
  blktrace: fix accounting of partially completed requests
  smp: Rename __smp_call_function_single() to smp_call_function_single_async()
  smp: Remove wait argument from __smp_call_function_single()
  watchdog: Simplify a little the IPI call
  smp: Move __smp_call_function_single() below its safe version
  smp: Consolidate the various smp_call_function_single() declensions
  smp: Teach __smp_call_function_single() to check for offline cpus
  smp: Remove unused list_head from csd
  smp: Iterate functions through llist_for_each_entry_safe()
  block: Stop abusing rq->csd.list in blk-softirq
  block: Remove useless IPI struct initialization
  ...
2014-04-01 19:19:15 -07:00
Jaegeuk Kim
ce23447fe5 f2fs: fix to cover io->bio with io_rwsem
In the f2fs_wait_on_page_writeback, io->bio should be covered by io_rwsem.
Otherwise, the bio pointer can become a dangling pointer due to data races.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-02 09:56:27 +09:00
Chao Yu
d54c795b49 f2fs: fix error path when fail to read inline data
We should unlock page in ->readpage() path and also should unlock & release page
in error path of ->write_begin() to avoid deadlock or memory leak.
So let's add release code to fix the problem when we fail to read inline data.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-02 09:56:27 +09:00
Chao Yu
2d7b822ad9 f2fs: use list_for_each_entry{_safe} for simplyfying code
This patch use list_for_each_entry{_safe} instead of list_for_each{_safe} for
simplfying code.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-02 09:56:27 +09:00
Chao Yu
cf0ee0f09b f2fs: avoid free slab cache under spinlock
Move kmem_cache_free out of spinlock protection region for better performance.

Change log from v1:
 o remove spinlock protection for kmem_cache_free in destroy_node_manager
suggested by Jaegeuk Kim.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-02 09:56:12 +09:00
Eric Whitney
ad6599ab3a ext4: fix premature freeing of partial clusters split across leaf blocks
Xfstests generic/311 and shared/298 fail when run on a bigalloc file
system.  Kernel error messages produced during the tests report that
blocks to be freed are already on the to-be-freed list.  When e2fsck
is run at the end of the tests, it typically reports bad i_blocks and
bad free blocks counts.

The bug that causes these failures is located in ext4_ext_rm_leaf().
Code at the end of the function frees a partial cluster if it's not
shared with an extent remaining in the leaf.  However, if all the
extents in the leaf have been removed, the code dereferences an
invalid extent pointer (off the front of the leaf) when the check for
sharing is made.  This generally has the effect of unconditionally
freeing the partial cluster, which leads to the observed failures
when the partial cluster is shared with the last extent in the next
leaf.

Fix this by attempting to free the cluster only if extents remain in
the leaf.  Any remaining partial cluster will be freed if possible
when the next leaf is processed or when leaf removal is complete.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-04-01 19:49:30 -04:00
Linus Torvalds
158e0d3621 Driver core / sysfs patches for 3.15-rc1
Here's the big driver core / sysfs update for 3.15-rc1.
 
 Lots of kernfs updates to make it useful for other subsystems, and a few
 other tiny driver core patches.
 
 All have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlM7A0wACgkQMUfUDdst+ynJNACfZlY+KNKIhNFt1OOW8rQfSZzy
 1PYAnjYuOoly01JlPrpJD5b4TdxaAq71
 =GVUg
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and sysfs updates from Greg KH:
 "Here's the big driver core / sysfs update for 3.15-rc1.

  Lots of kernfs updates to make it useful for other subsystems, and a
  few other tiny driver core patches.

  All have been in linux-next for a while"

* tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits)
  Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
  kernfs: cache atomic_write_len in kernfs_open_file
  numa: fix NULL pointer access and memory leak in unregister_one_node()
  Revert "driver core: synchronize device shutdown"
  kernfs: fix off by one error.
  kernfs: remove duplicate dir.c at the top dir
  x86: align x86 arch with generic CPU modalias handling
  cpu: add generic support for CPU feature based module autoloading
  sysfs: create bin_attributes under the requested group
  driver core: unexport static function create_syslog_header
  firmware: use power efficient workqueue for unloading and aborting fw load
  firmware: give a protection when map page failed
  firmware: google memconsole driver fixes
  firmware: fix google/gsmi duplicate efivars_sysfs_init()
  drivers/base: delete non-required instances of include <linux/init.h>
  kernfs: fix kernfs_node_from_dentry()
  ACPI / platform: drop redundant ACPI_HANDLE check
  kernfs: fix hash calculation in kernfs_rename_ns()
  kernfs: add CONFIG_KERNFS
  sysfs, kobject: add sysfs wrapper for kernfs_enable_ns()
  ...
2014-04-01 16:28:19 -07:00
Jakub Sitnicki
3e0d8a0104 ext2: acl: remove unneeded include of linux/capability.h
acl.c has not been (directly) using the interface defined by
linux/capability.h header since commit 3bd858ab1c
("Introduce is_owner_or_cap() to wrap CAP_FOWNER use with fsuid
check"). Remove it.

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-04-01 23:36:43 +02:00
Linus Torvalds
1ead658124 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer changes from Thomas Gleixner:
 "This assorted collection provides:

   - A new timer based timer broadcast feature for systems which do not
     provide a global accessible timer device.  That allows those
     systems to put CPUs into deep idle states where the per cpu timer
     device stops.

   - A few NOHZ_FULL related improvements to the timer wheel

   - The usual updates to timer devices found in ARM SoCs

   - Small improvements and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  tick: Remove code duplication in tick_handle_periodic()
  tick: Fix spelling mistake in tick_handle_periodic()
  x86: hpet: Use proper destructor for delayed work
  workqueue: Provide destroy_delayed_work_on_stack()
  clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS
  timer: Remove code redundancy while calling get_nohz_timer_target()
  hrtimer: Rearrange comments in the order struct members are declared
  timer: Use variable head instead of &work_list in __run_timers()
  clocksource: exynos_mct: silence a static checker warning
  arm: zynq: Add support for cpufreq
  arm: zynq: Don't use arm_global_timer with cpufreq
  clocksource/cadence_ttc: Overhaul clocksource frequency adjustment
  clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled
  clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI
  sh: Remove Kconfig entries for TMU, CMT and MTU2
  ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
  clocksource: armada-370-xp: Use atomic access for shared registers
  clocksource: orion: Use atomic access for shared registers
  clocksource: timer-keystone: Delete unnecessary variable
  clocksource: timer-keystone: introduce clocksource driver for Keystone
  ...
2014-04-01 11:00:07 -07:00
Linus Torvalds
a21e40877a Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Ingo Molnar:
 "The main purpose is to fix a full dynticks bug related to
  virtualization, where steal time accounting appears to be zero in
  /proc/stat even after a few seconds of competing guests running busy
  loops in a same host CPU.  It's not a regression though as it was
  there since the beginning.

  The other commits are preparatory work to fix the bug and various
  cleanups"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arch: Remove stub cputime.h headers
  sched: Remove needless round trip nsecs <-> tick conversion of steal time
  cputime: Fix jiffies based cputime assumption on steal accounting
  cputime: Bring cputime -> nsecs conversion
  cputime: Default implementation of nsecs -> cputime conversion
  cputime: Fix nsecs_to_cputime() return type cast
2014-04-01 10:16:10 -07:00
Miklos Szeredi
bd42998a6b ext4: add cross rename support
Implement RENAME_EXCHANGE flag in renameat2 syscall.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-04-01 17:08:44 +02:00
Miklos Szeredi
bd1af145b9 ext4: rename: split out helper functions
Cross rename (exchange source and dest) will need to call some of these
helpers for both source and dest, while overwriting rename currently only
calls them for one or the other.  This also makes the code easier to
follow.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-04-01 17:08:44 +02:00
Miklos Szeredi
0d7d5d678b ext4: rename: move EMLINK check up
Move checking i_nlink from after ext4_get_first_dir_block() to before.  The
check doesn't rely on the result of that function and the function only
fails on fs corruption, so the order shouldn't matter.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-04-01 17:08:44 +02:00
Miklos Szeredi
c0d268c366 ext4: rename: create ext4_renament structure for local vars
Need to split up ext4_rename() into helpers but there are too many local
variables involved, so create a new structure.  This also, apparently,
makes the generated code size slightly smaller.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-04-01 17:08:43 +02:00
Miklos Szeredi
da1ce0670c vfs: add cross-rename
If flags contain RENAME_EXCHANGE then exchange source and destination files.
There's no restriction on the type of the files; e.g. a directory can be
exchanged with a symlink.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2014-04-01 17:08:43 +02:00
J. Bruce Fields
4fd699ae3f vfs: lock_two_nondirectories: allow directory args
lock_two_nondirectories warned if either of its args was a directory.
Instead just ignore the directory args.  This is needed for locking in
cross rename.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-01 17:08:43 +02:00
Miklos Szeredi
0b3974eb04 security: add flags to rename hooks
Add flags to security_path_rename() and security_inode_rename() hooks.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2014-04-01 17:08:43 +02:00
Miklos Szeredi
0a7c3937a1 vfs: add RENAME_NOREPLACE flag
If this flag is specified and the target of the rename exists then the
rename syscall fails with EEXIST.

The VFS does the existence checking, so it is trivial to enable for most
local filesystems.  This patch only enables it in ext4.

For network filesystems the VFS check is not enough as there may be a race
between a remote create and the rename, so these filesystems need to handle
this flag in their ->rename() implementations to ensure atomicity.

Andy writes about why this is useful:

"The trivial answer: to eliminate the race condition from 'mv -i'.

Another answer: there's a common pattern to atomically create a file
with contents: open a temporary file, write to it, optionally fsync
it, close it, then link(2) it to the final name, then unlink the
temporary file.

The reason to use link(2) is because it won't silently clobber the destination.

This is annoying:
 - It requires an extra system call that shouldn't be necessary.
 - It doesn't work on (IMO sensible) filesystems that don't support
hard links (e.g. vfat).
 - It's not atomic -- there's an intermediate state where both files exist.
 - It's ugly.

The new rename flag will make this totally sensible.

To be fair, on new enough kernels, you can also use O_TMPFILE and
linkat to achieve the same thing even more cleanly."

Suggested-by: Andy Lutomirski <luto@amacapital.net> 
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2014-04-01 17:08:43 +02:00
Miklos Szeredi
520c8b1650 vfs: add renameat2 syscall
Add new renameat2 syscall, which is the same as renameat with an added
flags argument.

Pass flags to vfs_rename() and to i_op->rename() as well.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2014-04-01 17:08:42 +02:00
Miklos Szeredi
bc27027a73 vfs: rename: use common code for dir and non-dir
There's actually very little difference between vfs_rename_dir() and
vfs_rename_other() so move both inline into vfs_rename() which still stays
reasonably readable.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2014-04-01 17:08:42 +02:00
Miklos Szeredi
de22a4c372 vfs: rename: move d_move() up
Move the d_move() in vfs_rename_dir() up, similarly to how it's done in
vfs_rename_other().  The next patch will consolidate these two functions
and this is the only structural difference between them.

I'm not sure if doing the d_move() after the dput is even valid.  But there
may be a logical explanation for that.  But moving the d_move() before the
dput() (and the mutex_unlock()) should definitely not hurt.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2014-04-01 17:08:42 +02:00
Miklos Szeredi
44b1d53043 vfs: add d_is_dir()
Add d_is_dir(dentry) helper which is analogous to S_ISDIR().

To avoid confusion, rename d_is_directory() to d_can_lookup().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2014-04-01 17:08:41 +02:00
Chao Yu
6e452d69d4 f2fs: avoid unneeded lookup when xattr name length is too long
In f2fs_setxattr we have limit this attribute name length, so we should also
check it in f2fs_getxattr to avoid useless lookup caused by invalid name length.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-01 18:54:24 +09:00
Chao Yu
df0f8dc0e1 f2fs: avoid unnecessary bio submit when wait page writeback
This patch introduce is_merged_page() to check whether current page is merged
in f2fs bio cache. When page is not in cache, we can avoid submitting bio cache,
resulting in having more chance to merge pages.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-01 18:53:41 +09:00
Jaegeuk Kim
3bb5e2c8fe f2fs: return -EIO when node id is not matched
During the cleaing of node segments, F2FS can get errored node blocks due to
data race between node page lock and its valid bitmap operations.
In that case, it needs to return an error to skip such the obsolete block copy.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-01 17:38:26 +09:00
Lukas Czerner
e5b30416f3 ext4: remove unneeded test of ret variable
Currently in ext4_fallocate() and ext4_zero_range() we're testing ret
variable along with new_size. However in ext4_fallocate() we just tested
ret before and in ext4_zero_range() if will always be zero when we get
there so there is no need to test it in both cases.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-01 00:59:21 -04:00
Linus Torvalds
9d919e8d5b Merge branch 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue changes from Tejun Heo:
 "PREPARE_[DELAYED_]WORK() were used to change the work function of work
  items without fully reinitializing it; however, this makes workqueue
  consider the work item as a different one from before and allows the
  work item to start executing before the previous instance is finished
  which can lead to extremely subtle issues which are painful to debug.

  The interface has never been popular.  This pull request contains
  patches to remove existing usages and kill the interface.  As one of
  the changes was routed during the last devel cycle and another
  depended on a pending change in nvme, for-3.15 contains a couple merge
  commits.

  In addition, interfaces which were deprecated quite a while ago -
  __cancel_delayed_work() and WQ_NON_REENTRANT - are removed too"

* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove deprecated WQ_NON_REENTRANT
  workqueue: Spelling s/instensive/intensive/
  workqueue: remove PREPARE_[DELAYED_]WORK()
  staging/fwserial: don't use PREPARE_WORK
  afs: don't use PREPARE_WORK
  nvme: don't use PREPARE_WORK
  usb: don't use PREPARE_DELAYED_WORK
  floppy: don't use PREPARE_[DELAYED_]WORK
  ps3-vuart: don't use PREPARE_WORK
  wireless/rt2x00: don't use PREPARE_WORK in rt2800usb.c
  workqueue: Remove deprecated __cancel_delayed_work()
2014-03-31 15:08:51 -07:00
Linus Torvalds
1ce235faa8 - KGDB support for arm64
- PCI I/O space extended to 16M (in preparation of PCIe support patches)
 - Dropping ZONE_DMA32 in favour of ZONE_DMA (we only need one for the
   time being), together with swiotlb late initialisation to correctly
   setup the bounce buffer
 - DMA API cache maintenance support (not all ARMv8 platforms have
   hardware cache coherency)
 - Crypto extensions advertising via ELF_HWCAP2 for compat user space
 - Perf support for dwarf unwinding in compat mode
 - asm/tlb.h converted to the generic mmu_gather code
 - asm-generic rwsem implementation
 - Code clean-up
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.9 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOaqsAAoJEGvWsS0AyF7xYNUP/3/IPySIB+/6pyUG6q7kvIpF
 Di93M+VdmnLEOKhhx/tjkiEmEQMp0hFPeOlQRWf/Ugg4ksulP6gRejdDEjIfkmsk
 LrRXLjvH79NDJbN0pTUXqGDvLLZ9Qnib+HEOuKABIYUrwhNKySBk+5omGfXFtwLR
 Mb5JxPX0kbBXOqbOX4RgANQoRlE8GxJR3V245zlGxA4klcN4IiaDy/99kj+kaeaa
 Cl8X9K2I550IZ2YUAWPOut2aee2qRFQtAhIDgVthTYlGRx7Y/rDLM16B8fFY/T0H
 7azIpSO5hk5lp8J3giJHYajlJlXNla5FeHQb8XAVnlyqFBmCUn0vvd2VbPvWREJp
 UD8t1vZZt/s2he6CVAQIfQghwLyzrpPa19KbnyI+3HtsZ+NS/puBJmcVKZ2PBY/L
 28BsRzB7BKAPEVhNmyPwFHNdZTvjaqYUCLhQ0uTp1sSHMcLeSs7+vyMR99f/0u9E
 doSYAeF41ZkxHXL5xEevdj4sFkCEY1XFxER1Y8VM1rqHTeGEoeYbdS/u9tEeBgit
 jBelvHAlNTBgbur2nW4E9fQpAF2CsvWnRq6lSmDRTkyjzcLUQqA8bsQJ3aUyJtZt
 j17kUIzSH1q7x3zAaWQcvMVeawdkv2+HanjuTOdeO2ehvyG71vvxA3RkCv8o5Jhh
 da+jAMhkpYQxk8mSKkWm
 =8+cB
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull ARM64 updates from Catalin Marinas:
 - KGDB support for arm64
 - PCI I/O space extended to 16M (in preparation of PCIe support
   patches)
 - Dropping ZONE_DMA32 in favour of ZONE_DMA (we only need one for the
   time being), together with swiotlb late initialisation to correctly
   setup the bounce buffer
 - DMA API cache maintenance support (not all ARMv8 platforms have
   hardware cache coherency)
 - Crypto extensions advertising via ELF_HWCAP2 for compat user space
 - Perf support for dwarf unwinding in compat mode
 - asm/tlb.h converted to the generic mmu_gather code
 - asm-generic rwsem implementation
 - Code clean-up

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits)
  arm64: Remove pgprot_dmacoherent()
  arm64: Support DMA_ATTR_WRITE_COMBINE
  arm64: Implement custom mmap functions for dma mapping
  arm64: Fix __range_ok macro
  arm64: Fix duplicated Kconfig entries
  arm64: mm: Route pmd thp functions through pte equivalents
  arm64: rwsem: use asm-generic rwsem implementation
  asm-generic: rwsem: de-PPCify rwsem.h
  arm64: enable generic CPU feature modalias matching for this architecture
  arm64: smp: make local symbol static
  arm64: debug: make local symbols static
  ARM64: perf: support dwarf unwinding in compat mode
  ARM64: perf: add support for frame pointer unwinding in compat mode
  ARM64: perf: add support for perf registers API
  arm64: Add boot time configuration of Intermediate Physical Address size
  arm64: Do not synchronise I and D caches for special ptes
  arm64: Make DMA coherent and strongly ordered mappings not executable
  arm64: barriers: add dmb barrier
  arm64: topology: Implement basic CPU topology support
  arm64: advertise ARMv8 extensions to 32-bit compat ELF binaries
  ...
2014-03-31 15:01:45 -07:00