- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello).
- Constify acpi_get_handle() pathname argument to allow its callers to
pass const pathnames to it (Sakari Ailus).
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin).
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner).
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie).
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki).
- Add support for NBFT to the ACPI table parser (Stuart Hayes).
- Introduce list of known non-PNP devices to avoid enumerating some of
them as PNP devices (Rafael Wysocki).
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts
to report the actual maintainers information (Rafael Wysocki).
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach).
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede).
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede).
- Fix string termination handling in the ACPI battery driver (Armin
Wolf).
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue).
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans
de Goede).
- Silence missing prototype warnings in some places in the ACPI-related
code (Ammar Faizi).
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh).
- Correct spelling in firmware-guide/ACPI (Randy Dunlap).
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko).
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang Li).
-----BEGIN PGP SIGNATURE-----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=BoTs
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix a frequency limit issue in the ACPI processor performance
library code, fix a few issues in the ACPICA code, improve Crystal
Cove support in the ACPI PMIC driver, fix string handling in the ACPI
battery driver, add IRQ override quirks for a few machines more, fix
other assorted problems and clean up code and documentation.
Specifics:
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello)
- Constify acpi_get_handle() pathname argument to allow its callers
to pass const pathnames to it (Sakari Ailus)
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin)
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner)
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie)
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki)
- Add support for NBFT to the ACPI table parser (Stuart Hayes)
- Introduce list of known non-PNP devices to avoid enumerating some
of them as PNP devices (Rafael Wysocki)
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow
scripts to report the actual maintainers information (Rafael
Wysocki)
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach)
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede)
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede)
- Fix string termination handling in the ACPI battery driver (Armin
Wolf)
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue)
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver
(Hans de Goede)
- Silence missing prototype warnings in some places in the
ACPI-related code (Ammar Faizi)
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh)
- Correct spelling in firmware-guide/ACPI (Randy Dunlap)
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko)
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang
Li)"
* tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPI: make kobj_type structures constant
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
ACPICA: Fix typo in CDAT DSMAS struct definition
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
ACPI: CPPC: Fix some kernel-doc comments
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Documentation: firmware-guide/ACPI: correct spelling
ACPI: PMIC: Add comments with DSDT power opregion field names
ACPI: battery: Increase maximum string length
ACPI: battery: Fix buffer overread if not NUL-terminated
ACPI: APEI: EINJ: Limit error type to 32-bit width
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
ACPI: battery: Fix missing NUL-termination with large strings
ACPI: PNP: Introduce list of known non-PNP devices
ACPICA: nsrepair: handle cases without a return value correctly
ACPI: Silence missing prototype warnings
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
...
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya).
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang).
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney).
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh).
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König).
- Make the TEO cpuidle governor check CPU utilization in order to refine
idle state selection (Kajetan Puchalski).
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in that
driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing).
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann).
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh).
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki).
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski).
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald).
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap).
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=lZLx
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
Merge ACPI processor driver changes, ACPI table parser changes, ACPI
device enumeration changes related to PNP and a MAINTAINERS update
related to ACPI for 6.3-rc1:
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie).
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki).
- Add support for NBFT to the ACPI table parser (Stuart Hayes).
- Introduce list of known non-PNP devices to avoid enumerating some of
them as PNP devices (Rafael Wysocki).
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts
to report the actual maintainers information (Rafael Wysocki).
* acpi-processor:
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
ACPI: processor: idle: Drop unnecessary (void *) conversion
* acpi-tables:
ACPI: tables: Add support for NBFT
* acpi-pnp:
ACPI: PNP: Introduce list of known non-PNP devices
* acpi-maintainers:
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
-----BEGIN PGP SIGNATURE-----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=dCgg
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.3 from Viresh Kumar:
"- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi)."
* tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles
cpufreq: mediatek-hw: Register to module device table
cpufreq: tegra194: Enable CPUFREQ thermal cooling
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The remove function first frees the clks and only then calls
cpufreq_unregister_driver(). If one of the cpufreq callbacks is called
just before cpufreq_unregister_driver() is run, the freed clks might be
used.
Fixes: 6601b8030d ("davinci: add generic CPUFreq driver for DaVinci")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The new epp support causes warnings about three separate
but related bugs:
1) failing before allocation should just return an error:
drivers/cpufreq/amd-pstate.c:951:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!dev)
^~~~
drivers/cpufreq/amd-pstate.c:1018:9: note: uninitialized use occurs here
return ret;
^~~
2) wrong variable to store return code:
drivers/cpufreq/amd-pstate.c:963:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (rc)
^~
drivers/cpufreq/amd-pstate.c:1019:9: note: uninitialized use occurs here
return ret;
^~~
drivers/cpufreq/amd-pstate.c:963:2: note: remove the 'if' if its condition is always false
if (rc)
^~~~~~~
3) calling amd_pstate_set_epp() in cleanup path after determining
that it should not be called:
drivers/cpufreq/amd-pstate.c:1055:6: error: variable 'epp' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (cpudata->epp_policy == cpudata->policy)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/cpufreq/amd-pstate.c:1080:30: note: uninitialized use occurs here
amd_pstate_set_epp(cpudata, epp);
^~~
All three are trivial to fix, but most likely there are additional bugs
in this function when the error handling was not really tested.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Yuan Perry <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All but a few drivers ignore the return value of
cpufreq_unregister_driver(). Those few that don't only call it after
cpufreq_register_driver() succeeded, in which case the call doesn't
fail.
Make the function return no value and add a WARN_ON for the case that
the function is called in an invalid situation (i.e. without a previous
successful call to cpufreq_register_driver()).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # brcmstb-avs-cpufreq.c
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- the incorrect value returned by cpufreq driver's ->get() callback for
Qualcomm platforms (Douglas Anderson).
-----BEGIN PGP SIGNATURE-----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=Wvnb
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull an ARM cpufreq fix for 6.2-rc8 from Viresh Kumar:
- Fix the incorrect value returned by cpufreq driver's ->get() callback for
Qualcomm platforms (Douglas Anderson).
* tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
On a sc7180-based Chromebook, when I go to
/sys/devices/system/cpu/cpu0/cpufreq I can see:
cpuinfo_cur_freq:2995200
cpuinfo_max_freq:1804800
scaling_available_frequencies:300000 576000 ... 1708800 1804800
scaling_cur_freq:1804800
scaling_max_freq:1804800
As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this
bogus info started showing up as of commit c72cf0cb1d ("cpufreq:
qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That
commit seems to assume that everyone is on the LMH bandwagon, but
sc7180 isn't.
Let's go back to the old code in the case where LMH isn't used.
Fixes: c72cf0cb1d ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
[ Viresh: Fixed the 'fixes' tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Populate the flag CPUFREQ_IS_COOLING_DEV for the Tegra194 CPUFREQ driver
to register it as a cooling device. This enables CPU frequency
throttling for CPUs when the passive trip points are crossed.
Signed-off-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
replace the sprintf with a more generic sysfs_emit function
No intended potential function impact
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While amd-pstate driver was loaded with specific driver mode, it will
need to check which mode is enabled for the pstate driver,add this sysfs
entry to show the current status
$ cat /sys/devices/system/cpu/amd-pstate/status
active
Meanwhile, user can switch the pstate driver mode with writing mode
string to sysfs entry as below.
Enable passive mode:
$ sudo bash -c "echo passive > /sys/devices/system/cpu/amd-pstate/status"
Enable active mode (EPP driver mode):
$ sudo bash -c "echo active > /sys/devices/system/cpu/amd-pstate/status"
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
add suspend and resume support for the AMD processors by amd_pstate_epp
driver instance.
When the CPPC is suspended, EPP driver will set EPP profile to 'power'
profile and set max/min perf to lowest perf value.
When resume happens, it will restore the MSR registers with
previous cached value.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adds online and offline driver callback support to allow cpu cores go
offline and help to restore the previous working states when core goes
back online later for EPP driver mode.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add EPP driver support for AMD SoCs which support a dedicated MSR for
CPPC. EPP is used by the DPM controller to configure the frequency that
a core operates at during short periods of activity.
The SoC EPP targets are configured on a scale from 0 to 255 where 0
represents maximum performance and 255 represents maximum efficiency.
The amd-pstate driver exports profile string names to userspace that are
tied to specific EPP values.
The balance_performance string (0x80) provides the best balance for
efficiency versus power on most systems, but users can choose other
strings to meet their needs as well.
$ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_available_preferences
default performance balance_performance balance_power power
$ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_preference
balance_performance
To enable the driver,it needs to add `amd_pstate=active` to kernel
command line and kernel will load the active mode epp driver
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The amd-pstate driver may support multiple working modes.
Introduce a variable to keep track of which mode is currently enabled.
Here we use cppc_state var to indicate which mode is enabled.
This change will help to simplify the the amd_pstate_param() to choose
which mode used for the following driver registration.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The generic DT based cpufreq driver works for Loongson-1,
so delete the old custom driver.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All s3c24xx platforms were removed, so these five drivers are all
obsolete now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sa11xx platform has two cpufreq drivers, one for the older
StrongARM1100 SoC, and a second one for StrongARM1110. After
the removal of most SA1100 based machines, this driver is unused,
and only the sa1110-cpufreq driver remains.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.
Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.
Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the amd_pstate_adjust_perf(), there is one cpufreq_cpu_get() call to
increase increments the kobject reference count of policy and make it as
busy. Therefore, a corresponding call to cpufreq_cpu_put() is needed to
decrement the kobject reference count back, it will resolve the kernel
hang issue when unregistering the amd-pstate driver and register the
`amd_pstate_epp` driver instance.
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Without this, the CPUs are left in a random pstate. Since we don't
support deep idle yet (which powers down the CPUs), this results in
significantly increased idle power consumption in suspend.
Fixes: 6286bbb405 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Qualcomm SM6375 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
After making acpi_processor_get_platform_limit() use the "no limit"
value for its frequency QoS request when _PPC returns 0, it is not
necessary to replace the frequency corresponding to the first _PSS
return package entry with the maximum turbo frequency of the given
CPU in intel_pstate_init_acpi_perf_limits() any more, so drop the
code doing that along with the comment explaining it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 054a3ef683 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during
probe") assumed that every reg variable is 4*u32 wide (as most new qcom
SoCs set #address- and #size-cells to <2>. That is not the case for all of
them though. Check the cells values dynamically to ensure the proper
region of the DTB is being read.
Fixes: 054a3ef683 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The fields of the _CPC object are unsigned 32-bits values.
To avoid overflows while using _CPC's values, add 'u64' casts.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When -Woverride-init is enabled, gcc notices that the .attr
field is initialized twice:
drivers/cpufreq/apple-soc-cpufreq.c:331:27: error: initialized field overwritten [-Werror=override-init]
331 | .attr = apple_soc_cpufreq_hw_attr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Remove the first one, since this is not actually used.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This Kselftest update for Linux 6.2-rc1 consists of several fixes
and enhancements to existing tests and a few new tests:
- adds new amd-pstate and fixes and enhances existing ones
- adds new watchdog tests and enhances existing ones to improve coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes
-----BEGIN PGP SIGNATURE-----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=4cDX
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes and enhancements to existing tests and a few new tests:
- add new amd-pstate tests and fix and enhance existing ones
- add new watchdog tests and enhance existing ones to improve
coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes"
* tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (24 commits)
selftests/ftrace: Use long for synthetic event probe test
selftests/tpm2: Split async tests call to separate shell script runner
selftests: splice_read: Fix sysfs read cases
selftests: ftrace: Use "grep -E" instead of "egrep"
selftests: gpio: Use "grep -E" instead of "egrep"
selftests: kselftest_deps: Use "grep -E" instead of "egrep"
selftests/efivarfs: Add checking of the test return value
cpufreq: amd-pstate: fix spdxcheck warnings for amd-pstate-ut.c
selftests: rtc: skip when RTC is not present
selftests/ftrace: event_triggers: wait longer for test_event_enable
selftests/vDSO: Add riscv getcpu & gettimeofday test
Documentation: amd-pstate: Add tbench and gitsource test introduction
selftests: amd-pstate: Trigger gitsource benchmark and test cpus
selftests: amd-pstate: Trigger tbench benchmark and test cpus
selftests: amd-pstate: Split basic.sh into run.sh and basic.sh.
selftests: amd-pstate: Rename amd-pstate-ut.sh to basic.sh.
selftests/ftrace: Convert tracer tests to use 'requires' to specify program dependency
selftests/ftrace: Add check for ping command for trigger tests
selftests/watchdog: Fix spelling mistake "Temeprature" -> "Temperature"
selftests/watchdog: add test for WDIOC_GETTEMP
...
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stop trying to set boost MSRs on CPUs that don't support boost.
This corrects a bug in the recent patch "Defer setting boost MSRs".
Fixes: 13fdbc8b8d ("cpufreq: ACPI: Defer setting boost MSRs")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector Martin).
- New cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Lots of Qualcomm cpufreq driver updates, that include CPU clock
provider support, generic cleanups or reorganization, fixed a
potential memleak and the return value of cpufreq_driver->get()
(Manivannan Sadhasivam, and Chen Hui).
- Few updates to Qualcomm cpufreq driver's DT bindings, that include
support for CPU clock provider, fixing missing cache related
properties, and support for QDU1000/QRU1000 (Manivannan Sadhasivam,
Rob Herring, and Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- tegra186: Use flexible array to simplify memory allocation (Christophe
JAILLET).
-----BEGIN PGP SIGNATURE-----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=8cze
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.2 from Viresh Kumar:
"- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- New cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Lots of Qualcomm cpufreq driver updates, that include CPU clock
provider support, generic cleanups or reorganization, fixed a
potential memleak and the return value of cpufreq_driver->get()
(Manivannan Sadhasivam, and Chen Hui).
- Few updates to Qualcomm cpufreq driver's DT bindings, that include
support for CPU clock provider, fixing missing cache related
properties, and support for QDU1000/QRU1000 (Manivannan Sadhasivam,
Rob Herring, and Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- tegra186: Use flexible array to simplify memory allocation (Christophe
JAILLET)."
* tag 'cpufreq-arm-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
cpufreq: qcom-hw: Add CPU clock provider support
dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP
cpufreq: ti: Enable ti-cpufreq for ARCH_K3
arm64: dts: ti: k3-am625: Introduce operating-points table
cpufreq: dt-platdev: Blacklist ti,am625 SoC
cpufreq: ti-cpufreq: Add support for AM625
dt-bindings: cpufreq: qcom: Add missing cache related properties
cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq
cpufreq: qcom-hw: Use cached dev pointer in probe()
cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe
cpufreq: qcom-hw: Remove un-necessary cpumask_empty() check
cpufreq: Generalize of_perf_domain_get_sharing_cpumask phandle format
Use flexible array to simplify memory allocation.
It saves some memory, avoids an indirection when reading the 'clusters'
array and removes some LoC.
Detailed explanation:
====================
Knowing that:
- each devm_ allocation over-allocates 40 bytes for internal needs
- Some rounding is done by the memory allocator on 8, 16, 32, 64, 96,
128, 192, 256, 512, 1024, 2048, 4096, 8192 boundaries
and that:
- sizeof(struct tegra186_cpufreq_data) = 24
- sizeof(struct tegra186_cpufreq_cluster) = 16
Memory allocations in tegra186_cpufreq_probe() are:
data: (24 + 40) = 64 => 64 bytes
data->clusters: (2 * 16 + 40) = 72 => 96 bytes
So a total of 160 bytes are allocated.
56 for the real need, 80 for internal uses and 24 are wasted.
If 'struct tegra186_cpufreq_data' is reordered so that 'clusters' is a
flexible array:
- it saves one pointer in the structure
- only one allocation is needed
So, only 96 bytes are allocated:
16 + 2 * 16 + 40 = 88 => 96 bytes
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.
See also the following past commits:
commit d8de7a44e1 ("cpufreq: intel_pstate: Add Skylake servers support")
commit 706c532885 ("cpufreq: intel_pstate: Add Cometlake support in
no-HWP mode")
commit fbdc21e9b0 ("cpufreq: intel_pstate: Add Icelake servers support in
no-HWP mode")
commit 71bb5c82aa ("cpufreq: intel_pstate: Add Tigerlake support in
no-HWP mode")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
after using pci_get_device(). Let's add it.
Fixes: 59a3b3a8db ("cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In cpufreq_policy_alloc(), it will call uninitialed completion in
cpufreq_sysfs_release() when kobject_init_and_add() fails. And
that will cause a crash such as the following page fault in complete:
BUG: unable to handle page fault for address: fffffffffffffff8
[..]
RIP: 0010:complete+0x98/0x1f0
[..]
Call Trace:
kobject_put+0x1be/0x4c0
cpufreq_online.cold+0xee/0x1fd
cpufreq_add_dev+0x183/0x1e0
subsys_interface_register+0x3f5/0x4e0
cpufreq_register_driver+0x3b7/0x670
acpi_cpufreq_init+0x56c/0x1000 [acpi_cpufreq]
do_one_initcall+0x13d/0x780
do_init_module+0x1c3/0x630
load_module+0x6e67/0x73b0
__do_sys_finit_module+0x181/0x240
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 4ebe36c94a ("cpufreq: Fix kobject memleak")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This driver implements CPU frequency scaling for Apple Silicon SoCs,
including M1 (t8103), M1 Max/Pro/Ultra (t600x), and M2 (t8112).
Each CPU cluster has its own register set, and frequency management is
fully automated by the hardware; the driver only has to write one
register. There is boost frequency support, but the hardware will only
allow their use if only a subset of cores in a cluster are in
non-deep-idle. Since we don't support deep idle yet, these frequencies
are not achievable, but the driver supports them. They will remain
disabled in the device tree until deep idle is implemented, to avoid
confusing users.
This driver does not yet implement the memory controller performance
state tuning that usually accompanies higher CPU p-states. This will be
done in a future patch.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Qcom CPUFreq hardware (EPSS/OSM) controls clock and voltage to the CPU
cores. But this relationship is not represented with the clk framework
so far.
So, let's make the qcom-cpufreq-hw driver a clock provider. This makes the
clock producer/consumer relationship cleaner and is also useful for CPU
related frameworks like OPP to know the frequency at which the CPUs are
running.
The clock frequency provided by the driver is for each frequency domain.
We cannot get the frequency of each CPU core because, not all platforms
support per-core DCVS feature.
Also the frequency supplied by the driver is the actual frequency that
comes out of the EPSS/OSM block after the DCVS operation. This frequency is
not same as what the CPUFreq framework has set but it is the one that gets
supplied to the CPUs after throttling by LMh.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Xiu: Fixed memleak. ]
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When the amd_pstate driver is built-in users still need a method to be
able enable or disable it depending upon their circumstance.
Add support for an early parameter to do this.
There is some performance degradation on a number of ASICs in the
passive mode. This performance issue was originally discovered in
shared memory systems but it has been proven that certain workloads
on MSR systems also suffer performance issues.
Set the amd-pstate driver as disabled by default to temporarily
mitigate the performance problem.
1) with `amd_pstate=disable`, pstate driver will be disabled to load at
kernel booting.
2) with `amd_pstate=passive`, pstate driver will be enabled and loaded
as non-autonomous working mode supported in the low-level power
management firmware.
3) If neither parameter is specified, the driver will be disabled by
default to avoid triggering performance regressions in certain ASICs
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently when the amd-pstate and acpi_cpufreq are both built into
kernel as module driver, amd-pstate will not be loaded by default
in this case.
Change amd-pstate driver as built-in type, it will resolve the loading
sequence problem to allow user to make amd-pstate driver as the default
cpufreq scaling driver.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Fixes: ec437d71db ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
