The vc4_hdmi_connector was only used to switch between drm_connector to
drm_encoder. However, we can now use vc4_hdmi to do the switch, so that
structure is redundant.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/aee5120728db350b19c074de4290eafaf01e6671.1599120059.git-series.maxime@cerno.tech
The unbind function needs to retrieve a vc4_hdmi structure pointer through
the struct device that we're given since we want to support multiple HDMI
controllers.
However, our optional ASoC support doesn't make that trivial since it will
overwrite the device drvdata if we use it, but obviously won't if we don't
use it.
Let's make sure the fields are at the proper offset to be able to cast
between the snd_soc_card structure and the vc4_hdmi structure
transparently so we can support both cases.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/717082cba06b5c06280f26c56c08aee512365ed3.1599120059.git-series.maxime@cerno.tech
Our CEC code also retrieves the associated vc4_hdmi by setting the
vc4_dev pointer as its private data, and then dereferences its vc4_hdmi
pointer.
In order to eventually get rid of that pointer, we can simply pass the
vc4_hdmi pointer directly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/cb575cb9e13018bce131b8535e5b572dc1027877.1599120059.git-series.maxime@cerno.tech
Whenever the code needs to access the vc4_hdmi structure from a DRM
connector or encoder, it first accesses the drm_device associated to the
connector, then retrieve the drm_dev private data which gives it a
pointer to our vc4_dev, and will finally follow the vc4_hdmi pointer in
that structure.
That will also give us some trouble when having multiple controllers,
but now that we have our encoder and connector structures that are part
of vc4_hdmi, we can simply call container_of on the DRM connector or
encoder and retrieve the vc4_hdmi structure directly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/536ecce5898ea75839fa3788b876009d69a5ccae.1599120059.git-series.maxime@cerno.tech
The function vc4_hdmi_connector_detect access its vc4_hdmi struct by
dereferencing the pointer in the structure vc4_dev. This will cause some
issues when we will have multiple HDMI controllers, so let's just use the
local variable for now instead of dereferencing that pointer all the time,
and we'll fix the local variable later.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/ef92c5582d3b2894128b2272a8ada7cbc20be3d9.1599120059.git-series.maxime@cerno.tech
The current driver only supports a single HDMI controller, and part of
the issue is that the main vc4_dev structure holds a pointer to its
(only) HDMI controller, and the HDMI registers accessors will use it to
retrieve the mapped addresses.
Let's modify those accessors to use directly the vc4_hdmi structure so
that we can eventually get rid of that single global pointer.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/886b955586264ce078d7d35e9b8ef9ae51675c27.1599120059.git-series.maxime@cerno.tech
The driver isn't consistent with the name given to the vc4_hdmi
structure pointer in its functions. Make sure to use a consistent name.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/696be840dc427245afe94b43e0b829c728d948a7.1599120059.git-series.maxime@cerno.tech
Now that we are passing the vc4_hdmi structure to the connector init
function, we can simply use the pointer in that structure instead of
having the pointer as an argument.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/4fe1b45fe45e4ba57d40154da010807d4e5db86c.1599120059.git-series.maxime@cerno.tech
the vc4_hdmi driver has some custom structures to hold the data it needs to
associate with the drm_encoder and drm_connector structures.
However, it allocates them separately from the vc4_hdmi structure which
makes it more complicated than it needs to be.
Move those structures to be contained by vc4_hdmi and update the code
accordingly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/93b418d63c876355af2b3d3afebe31a256268623.1599120059.git-series.maxime@cerno.tech
We're calling vc4_debugfs_add_file with our struct vc4_hdmi pointer set
in the private field, but we don't use that field and go through the
main struct vc4_dev to get it.
Let's use the private field directly, that will save us some trouble
later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/24028dc06c379dbc71f98e027cce2839fdd446ce.1599120059.git-series.maxime@cerno.tech
The BCM2711 comes with other pixelvalves that have different requirements
and capabilities. Let's document their compatible.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/3a21824460d96245984d730e446863a4853f2ae5.1599120059.git-series.maxime@cerno.tech
In order to prevent issues during the firmware to KMS transition, we need
to make sure the pixelvalve are disabled at boot time so that the DRM state
matches the hardware state.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/ad57f1bdeae7a99631713b0fc193c86f223de042.1599120059.git-series.maxime@cerno.tech
At boot time, if we detect that a pixelvalve has been enabled, we need to
be able to retrieve the HVS channel it has been assigned to so that we can
disable that channel too. Let's create that function that returns the FIFO
or an error from a given output.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/178192d90874559b8386139f2226e773347729fc.1599120059.git-series.maxime@cerno.tech
During the transition from the firmware to the KMS driver, we need to pay
particular attention to how we deal with the pixelvalves that have already
been enabled, otherwise either timeouts or stuck pixels can occur. We'll
thus need to call the function to stop an HVS channel at boot.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/a9d5f0891c3bc1deb6b16d56ca6994ed912ec7c7.1599120059.git-series.maxime@cerno.tech
Even though it's not really clear why we need to flush the PV FIFO during
the configuration even though we started by flushing it, experience shows
that without it we get a stale pixel stuck in the FIFO between the HVS and
the PV.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ccd6269ba37b2f849ba6e62471c99bd93a4548a0.1599120059.git-series.maxime@cerno.tech
In order to avoid a stale pixel getting stuck on mode change or a disable
/ enable cycle, we need to make sure to flush the PV FIFO on disable.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/26fe48b09d77088679ed0c8cb8cf0db2f108195e.1599120059.git-series.maxime@cerno.tech
In order to avoid pixels getting stuck in the (unflushable) FIFO between
the HVS and the PV, we need to add some delay after disabling the PV output
and before disabling the HDMI controller. 20ms seems to be good enough so
let's use that.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/15cf215bd2ceebd203c4010c09c21a4019c650ed.1599120059.git-series.maxime@cerno.tech
In the BCM2711, the setup of the HVS, pixelvalve and HDMI controller
requires very precise ordering and timing that the regular atomic callbacks
don't provide. Let's add new callbacks on top of the regular ones to be
able to split the configuration as needed.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1dd78efe8f29add73c97d0148cfd4ec8e34aaf22.1599120059.git-series.maxime@cerno.tech
In order to avoid stale pixels getting stuck in an intermediate FIFO
between the HVS and the pixelvalve on BCM2711, we need to configure the HVS
channel before the pixelvalve is reset and configured.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9d7c5a03bc1a1e6d50f7b617cc2d8a46a4bbb7bc.1599120059.git-series.maxime@cerno.tech
Since we moved the pixelvalve configuration to atomic_enable, we're now
first calling the function that resets the pixelvalve and then the one that
configures it.
However, the first thing the latter is doing is calling the reset function,
meaning that we reset twice our pixelvalve. Let's remove the first call.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0a31af0d4a7a070de979f0e5b618d9e2c730e7f.1599120059.git-series.maxime@cerno.tech
On BCM2711 to avoid stale pixels getting stuck in intermediate FIFOs, the
pixelvalve needs to be setup each time there's a mode change or enable /
disable sequence.
Therefore, we can't really use mode_set_nofb anymore to configure it, but
we need to move it to atomic_enable.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f86c7a6946f98262f1cf59a461596a796d4bcc5f.1599120059.git-series.maxime@cerno.tech
In order to clear our intermediate FIFOs that might end up with a stale
pixel, let's make sure our FIFO channel is reset every time our channel is
setup.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b34c562b36177c758dd2e9d84bceb07689bfbe05.1599120059.git-series.maxime@cerno.tech
Since most of the HVS channel is setup in the init function, let's move the
gamma setup there too. As this makes the HVS mode_set function empty, let's
remove it in the process.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d439da8f1592a450a6ad35ab1f9e77def17c7965.1599120059.git-series.maxime@cerno.tech
Now that we only configure the PixelValve in vc4_crtc_config_pv, it doesn't
really make much sense to dump its register content in its caller.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c195af7d9e140a2a6db32992ee7e54071c6f94ba.1599120059.git-series.maxime@cerno.tech
The driver resets the pixelvalve FIFO in a number of occurences without
always using the same sequence.
Since this will be critical for BCM2711, let's move that sequence to a
function so that we are consistent.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/fb31003a9eee02c4b949556299ff41f0a113499a.1599120059.git-series.maxime@cerno.tech
The previous generations were only supporting a single HDMI controller, but
that's about to change, so put an index as well to differentiate between
the two controllers.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/84e11e4793aaa30d6e5c56e305d22404ac5a932d.1599120059.git-series.maxime@cerno.tech
The longer FIFOs in vc5 pixelvalves means that the FIFO full level
doesn't fit in the original register field and that we also have a
secondary field. In order to prepare for this, let's move the registers
fill part to a helper function.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e46a3823128af50c1c833de8fa9b95e9b86c2f66.1599120059.git-series.maxime@cerno.tech
Not all pixelvalve FIFOs in vc5 have the same depth, so we need to add that
to our vc4_crtc_data structure to be able to compute the fill level
properly later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/7df3549c1bea9b0a27c784dc416bb9a831e4e18f.1599120059.git-series.maxime@cerno.tech
The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output
being connected to a pixelvalve, and some muxing between the FIFOs and
outputs.
Any output cannot feed from any FIFO though, and they all have a bunch of
constraints.
In order to support this, let's store the possible FIFOs each output can be
assigned to in the vc4_crtc_data, and use that information at atomic_check
time to iterate over all the CRTCs enabled and assign them FIFOs.
The channel assigned is then set in the vc4_crtc_state so that the rest of
the driver can use it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f9aba3814ef37156ff36f310118cdd3954dd3dc5.1599120059.git-series.maxime@cerno.tech
The vc4 atomic commit loop has an handrolled loop that is basically
identical to for_each_new_crtc_state, let's convert it to that helper.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a712d2b70aaee20379cfc52c2141aa2f6e2a9d5b.1599120059.git-series.maxime@cerno.tech
The VIDEN bit in the pixelvalve currently being used to enable or disable
the pixelvalve seems to not be enough in some situations, which whill end
up with the pixelvalve stalling.
In such a case, even re-enabling VIDEN doesn't bring it back and we need to
clear the FIFO. This can only be done if the pixelvalve is disabled though.
In order to overcome this, we can configure the pixelvalve during
mode_set_no_fb by calling vc4_crtc_config_pv, but only enable it in
atomic_enable and flush the FIFO there, and in atomic_disable disable the
pixelvalve again.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e97596f62f4df83424d994a23465463ac60f986e.1599120059.git-series.maxime@cerno.tech
The vc4_crtc_handle_page_flip already has a local variable holding the
value of vc4_crtc->channel, so let's use it instead.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/439c589baec72ddb89159857a2d078fdd77b02a2.1599120059.git-series.maxime@cerno.tech
In vc5, the HVS has 6 outputs and 3 FIFOs (or channels), with
pixelvalves each being assigned to a given output, but each output can
then be muxed to feed from multiple FIFOs.
Since vc4 had that entirely static, both were probably equivalent, but
since that changes, let's rename hvs_channel to hvs_output in the
vc4_crtc_data, since a pixelvalve is really connected to an output, and
not to a FIFO.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b7618bb17b1c435c5d6ce50bcde2fe9243281d02.1599120059.git-series.maxime@cerno.tech
The COB allocation depends on the HVS channel used for a given
pixelvalve.
While the channel allocation was entirely static in vc4, vc5 changes
that and at bind time, a pixelvalve can be assigned to multiple
HVS channels.
Let's prepare that rework by allocating the COB when it's actually
needed.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/484cbd4b00cfeee425295df438222258cc39a3dd.1599120059.git-series.maxime@cerno.tech
Some of the HDMI pixelvalves in vc5 output two pixels per clock cycle.
Let's put the number of pixel output per clock cycle in the CRTC data and
update the various calculations to reflect that.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/18a3bb079981ba820132b37e736a4bb371234d2e.1599120059.git-series.maxime@cerno.tech
Let's now create more planes that can be affected to all the CRTCs.
vc4 has 3 CRTCs, 1 primary and 1 cursor each, and was having 24 (8
planes per CRTC) overlays.
However, vc5 has 5 CRTCs, so keeping the same logic would put us at 50
planes which is well above the 32 planes limit imposed by DRM.
Using 16 seems like a good tradeoff between staying under 32 and yet
providing enough planes.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/b41003001541fc2bb23668c699c0369ff7983be8.1599120059.git-series.maxime@cerno.tech
The current code is using the maximum of the source line size and the
destination line size to compute the size of the LBM to allocate.
While this is simpler, it starts to be an issue with modes such as 4k with
a quite long that will consume all the available memory, so we no longer
have that luxury.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9e091883a4f7395c5b6a4f7c6070225934293db.1599120059.git-series.maxime@cerno.tech
In order to prevent timeouts and stalls in the pipeline, the core clock
needs to be maxed at 500MHz during a modeset on the BCM2711.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/37ed9e0124c5cce005ddc8dafe821d8b0da036ff.1599120059.git-series.maxime@cerno.tech
The HVS found in the BCM2711 is slightly different from the previous
generations.
Most notably, the display list layout changes a bit, the LBM doesn't have
the same size and the formats ordering for some formats is swapped.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1d02fab3b916d639c2dc05608c117bbd8230ebe8.1599120059.git-series.maxime@cerno.tech
Add support for the video pattern generator (VPG) BER pattern mode and
configuration in runtime.
This enables using the debugfs interface to manipulate the VPG after
the pipeline is set.
Also, enables the usage of the VPG BER pattern.
Changes in v2:
- Added VID_MODE_VPG_MODE
- Solved incompatible return type on __get and __set
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Adrian Pop <pop.adrian61@gmail.com>
Signed-off-by: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Tested-by: Adrian Pop <pop.adrian61@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a809feb7d7153a92e323416f744f1565e995da01.1586180592.git.angelo.ribeiro@synopsys.com
