Commit Graph

840 Commits

Author SHA1 Message Date
Kulikov Vasiliy
04ad327f27 drm: i915: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-20 17:14:25 +02:00
Linus Torvalds
8d86dc6a5b Revert "drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on)."
This reverts commit cfecde435d, since it
seems to cause some systems to not come up with any video output at all
(or video that only comes on when X starts up).

Fixes bugzilla:

    http://bugzilla.kernel.org/show_bug.cgi?id=16163

Reported-and-tested-by: David John <davidjon@xenontk.org>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
Acked-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-08 20:16:28 -07:00
Chris Wilson
5a79395b27 drm: Propagate error from drm_fb_helper_init().
The previous commit fixes the problem, these commits make sure we actually
fail properly if it happens again.

I've squashed the commits from Chris since they are all fixing one issue.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:32:02 +10:00
Dave Airlie
a3524f1b27 drm/i915: fix oops on single crtc devices.
(regression fix since fbdev/kms rework).

My fb rework didn't remember about the 84/65s.

Reported-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:31:16 +10:00
Chris Wilson
e7b526bb85 drm/i915: Move non-phys cursors into the GTT
Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b21
  https://bugs.freedesktop.org/show_bug.cgi?id=28335

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05 20:37:37 -07:00
Linus Torvalds
1067b6c2be Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (41 commits)
  drm/radeon/kms: make sure display hw is disabled when suspending
  drm/vmwgfx: Allow userspace to change default layout. Bump minor.
  drm/vmwgfx: Fix framebuffer modesetting
  drm/vmwgfx: Fix vga save / restore with display topology.
  vgaarb: use MIT license
  vgaarb: convert pr_devel() to pr_debug()
  drm: fix typos in Linux DRM Developer's Guide
  drm/radeon/kms/pm: voltage fixes
  drm/radeon/kms/pm: radeon_set_power_state fixes
  drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
  drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
  drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
  drm/radeon/kms/evergreen: add initial CS parser
  drm/kms: disable/enable poll around switcheroo on/off
  drm/nouveau: fixup confusion over which handle the DSM is hanging off.
  drm/nouveau: attempt to get bios from ACPI v3
  drm/nv50: cast IGP memory location to u64 before shifting
  drm/ttm: Fix ttm_page_alloc.c
  drm/ttm: Fix cached TTM page allocation.
  drm/vmwgfx: Remove some leftover debug messages.
  ...
2010-06-03 07:19:45 -07:00
Zou Nan hai
e3a815fcd3 drm/i915: add HAS_BSD check to i915_getparam
This will let userland only try to use the new media decode
functionality when the appropriate kernel is present.

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-06-01 11:21:09 -07:00
Adam Jackson
9bc354998f drm/i915: Honor sync polarity from VBT panel timing descriptors
I'm actually kind of shocked that it works at all otherwise.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-06-01 10:19:37 -07:00
Dave Airlie
fbf81762e3 drm/kms: disable/enable poll around switcheroo on/off
Because we aren't in a suspend state the poll will still run when we have switcherooed a card off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:36:02 +10:00
Zhenyu Wang
a1786bd270 drm/i915: Unmask interrupt for render engine on Sandybridge
With splitted engines on Sandybridge, each engine has its own
interrupt control as well. This unmasks the interrupt to properly
enable pipe control notify event for render engine.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 11:17:26 -07:00
Zhenyu Wang
ca76482e0f drm/i915: Fix PIPE_CONTROL command on Sandybridge
Sandybridge(Gen6) has new format for PIPE_CONTROL command,
the flush and post-op control are in dword 1 now. This
changes command length field for difference between Ironlake
and Sandybridge.

I tried to test this with noop request and issue PIPE_CONTROL
command for each sequence and track notify interrupts, which
seems work fine. Hopefully we don't need workaround like on
Ironlake for Sandybridge.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 11:11:23 -07:00
Chris Wilson
ab34c22681 drm/i915: Fix up address spaces in slow_kernel_write()
Since we now get_user_pages() outside of the mutex prior to performing
the copy, we kmap() the page inside the copy routine and so need to
perform an ordinary memcpy() and not copy_from_user().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 11:03:29 -07:00
Chris Wilson
99a03df57c drm/i915: Use non-atomic kmap for slow copy paths
As we do not have a requirement to be atomic and avoid sleeping whilst
performing the slow copy for shmem based pread and pwrite, we can use
kmap instead, thus simplifying the code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 11:02:36 -07:00
Chris Wilson
9b8c4a0b21 drm/i915: Avoid moving from CPU domain during pwrite
We can avoid an early clflush when pwriting if we use the current CPU
write domain rather than moving the object to the GTT domain for the
purposes of the pwrite. This has the advantage of not flushing the
presumably hot data that we want to upload into the bo, and of ascribing
the clflush to the execution when profiling.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 11:02:00 -07:00
Chris Wilson
68f95ba9e2 drm/i915: Cleanup after failed initialization of ringbuffers
The callers expect us to cleanup any partially initialised structures
before reporting the error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 11:01:02 -07:00
Chris Wilson
654fc6073f drm/i915: Reject bind_to_gtt() early if object > aperture
If the object is bigger than the entire aperture, reject it early
before evicting everything in a vain attempt to find space.

v2: Use E2BIG as suggested by Owain G. Ainsworth.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:52:15 -07:00
Chris Wilson
85cd4612fd drm/i915: Check error code whilst moving buffer to GTT domain.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:49:56 -07:00
Chris Wilson
3d1cc47037 drm/i915: Remove spurious warning "Failure to install fence"
This particular warning is harmless as we emit during the normal
pinning process where the batch buffer requires more fences than is
available without eviction. Only if we fail to evict enough fences does
this become a problem, so include the requested number of fences in the
ultimate *error* message.

v2: Remember to compile test even trial patches to remove warnings.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:49:38 -07:00
Chris Wilson
ac0c6b5ad3 drm/i915: Rebind bo if currently bound with incorrect alignment.
Whilst pinning the buffer, check that that its current alignment
matches the requested alignment. If it does not, rebind.

This should clear up any final render errors whilst resuming,
for reference:

  Bug 27070 - [i915] Page table errors with empty ringbuffer
  https://bugs.freedesktop.org/show_bug.cgi?id=27070

  Bug 15502 -  render error detected, EIR: 0x00000010
  https://bugzilla.kernel.org/show_bug.cgi?id=15502

  Bug 13844 -  i915 error: "render error detected"
  https://bugzilla.kernel.org/show_bug.cgi?id=13844

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:43:38 -07:00
Chris Wilson
a7faf32d00 drm/i915: Include pitch in set_base debug statement.
Add the pitch that we about to write into the control register along
with the base, offset and coordinates that go into the other control
registers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:43:25 -07:00
Chris Wilson
a939406fda drm/i915: Only print "nothing to do" debug message as required.
If the FBC is already disabled, then we do not even attempt to disable
FBC and so there is no point emitting a debug statement at that point,
having already emitted one saying why we are disabling FBC.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:43:14 -07:00
Chris Wilson
808b24d6ed drm/i915: Propagate error from unbinding an unfenceable object.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:42:52 -07:00
Chris Wilson
b118c1e363 drm/i915: Avoid nesting of domain changes when setting display plane
Nesting domain changes will cause confusion when trying to interpret the
tracepoints describing the sequence of changes for the object, as well
as obscuring the order of operations for the reader of the code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:42:04 -07:00
Chris Wilson
468f0b44ce drm/i915: Hold the spinlock whilst resetting unpin_work along error path
Delay taking the mutex until we need to and ensure that we hold the
spinlock when resetting unpin_work on the error path. Also defer the
debugging print messages until after we have released the spinlock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:40:27 -07:00
Chris Wilson
35aed2e6be drm/i915: Only print an message if there was an error
Only report an error if the GPU has actually detected one, otherwise we
are just hung.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28 10:39:25 -07:00
Eric Anholt
e20f9c64c7 drm/i915: Clean up leftover bits from hws move to ring structure.
Fixes /debug/dri/0/i915_gem_interrupt output for status page.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:51:47 -07:00
Li Peng
9553426372 drm/i915: Add CxSR support on Pineview DDR3
Pineview with DDR3 memory has different latencies to enable CxSR.
This patch updates CxSR latency table to add Pineview DDR3 latency
configuration. It also adds one flag "is_ddr3" for checking DDR3
setting in MCHBAR.

Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Peng <peng.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:22:51 -07:00
Dan Carpenter
d8201ab651 i915: remove unneeded null checks
The "encoder" variable can never be null because it is used as loop
cursor in a list_for_each_entry() loop.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:16:52 -07:00
Dan Carpenter
90a78e8f60 i915/intel_sdvo: remove unneeded null check
The "connector" variable is used as the cursor in a
list_for_each_entry() and it's always non-null so we don't need to check
it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:16:35 -07:00
Zhenyu Wang
467b200da7 drm/i915: Fix HDMI mode select for Cougarpoint PCH
For real HDMI sink, CPT HDMI port has to set 'HDMI' mode flag
in order to make HDMI audio work correctly.

This is required patch for drm/i915 to enable HDMI audio on CPT PCH,
ALSA patch is at http://mailman.alsa-project.org/pipermail/alsa-devel/2010-May/027601.html

Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:14:52 -07:00
Daniel Vetter
778c35444f drm/i915: combine all small integers into one single bitfield
This saves a whooping 7 dwords. Zero functional changes. Because
some of the refcounts are rather tightly calculated, I've put
BUG_ONs in the code to check for overflows.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:13:36 -07:00
Adam Jackson
a7de64e540 drm/i915/dp: Add DPCD data to debug output
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:12:52 -07:00
Adam Jackson
9962c9252e drm/i915/dp: Only enable enhanced framing if the sink supports it
DisplayPort spec v1.1a, Table 2-52.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:12:47 -07:00
Chris Wilson
9908ff736a drm/i915: Kill dangerous pending-flip debugging
We can, by virtue of a vblank interrupt firing in the middle of setting
up the unpin work (i.e. after we set the unpin_work field and before we
write to the ringbuffer) enter intel_finish_page_flip() prior to
receiving the pending flip notification. Therefore we can expect to hit
intel_finish_page_flip() under normal circumstances without a pending flip
and even without installing the pending_flip_obj. This is exacerbated by
aperture thrashing whilst binding the framebuffer

References:

  Bug 28079 - "glresize" causes kernel panic in intel_finish_page_flip.
  https://bugs.freedesktop.org/show_bug.cgi?id=28079

Reported-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:11:45 -07:00
Tobias Klauser
9a7e8492d1 drm/i915: Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:10:26 -07:00
Jesse Barnes
7648fa99eb drm/i915: add power monitoring support
Add power monitoring support to the i915 driver for use by the IPS
driver.  Export the available power info to the IPS driver through a few
new inter-driver hooks.  When used together, the IPS driver and this
patch can significantly increase graphics performance on Ironlake class
chips.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Fixed 32-bit compile.  stupid obfuscating div_u64()]
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:10:01 -07:00
Adam Jackson
7a772c492f drm/i915/gen4: Extra CRT hotplug paranoia
Disable the CRT plug interrupt while doing the force cycle, explicitly
clear any CRT interrupt we may have generated, and restore when done.
Should mitigate interrupt storms from hotplug detection.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:53:20 -07:00
Krzysztof Halasa
734b4157b3 drm/i915: Add support for interlaced display.
This doesn't change the clock limits (minimums), i.e. it won't make it
output 720x576 PAL nor 720x480 NTSC, but it will work with modes like
1080i etc. (including GLX and textured Xvideo, not sure about the
overlay).

Tested on i915 + analog VGA, it would be worth checking if newer chips
(and which ones) still support interlaced mode.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:51:01 -07:00
Daniel J Blueman
f953c9353f i915: fix lock imbalance on error path...
While investigating Intel i5 Arrandale GPU lockups with -rc4, I
noticed a lock imbalance.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:50:11 -07:00
Li Zefan
f41275e893 drm/i915: Convert more trace events to DEFINE_EVENT
Convert i915_gem_object_clflush to DEFINE_EVENT, and save ~0.5K:

   text    data     bss     dec     hex filename
  13204    2732      12   15948    3e4c i915_trace_points.o.orig
  12668    2732      12   15412    3c34 i915_trace_points.o

No change in functionality.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:49:13 -07:00
Jesse Barnes
9517a92f48 drm/i915: add timeout to FBC disable waits
FBC disable on 965 can take long enough to trigger latency checks in the
kernel so be sure to timeout after a reasonable period.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15015.

Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:48:43 -07:00
Zou Nan hai
d1b851fc0d drm/i915: implement BSD ring buffer V2
The BSD (bit stream decoder) ring is used for accessing the BSD engine
which decodes video bitstream for H.264 and VC1 on G45+.  It is
asynchronous with the render ring and has access to separate parts of
the GPU from it, though the render cache is coherent between the two.

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Xiang Hai hao <haihao.xiang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:46:58 -07:00
Zou Nan hai
852835f343 drm/i915: convert some gem structures to per-ring V2
The active list and request list move into the ringbuffer structure,
so each can track its active objects in the order they are in that
ring.  The flushing list does not, as it doesn't matter which ring
caused data to end up in the render cache.  Objects gain a pointer to
the ring they are active on (if any).

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Xiang Hai hao <haihao.xiang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:42:11 -07:00
Zou Nan hai
8187a2b70e drm/i915: introduce intel_ring_buffer structure (V2)
Introduces a more complete intel_ring_buffer structure with callbacks
for setup and management of a particular ringbuffer, and converts the
render ring buffer consumers to use it.

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Xiang Hai hao <haihao.xiang@intel.com>
[anholt: Fixed up whitespace fail and rebased against prep patches]
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 13:24:49 -07:00
Eric Anholt
d3301d86b4 drm/i915: Rename dev_priv->ring to dev_priv->render_ring.
With the advent of the BSD ring, be clear about which ring this is.
The docs are pretty consistent with calling this the Render engine at
this point.
2010-05-26 12:36:00 -07:00
Eric Anholt
62fdfeaf8b drm/i915: Move ringbuffer-related code to intel_ringbuffer.c.
This is preparation for supporting multiple ringbuffers on Ironlake.
The non-copy-and-paste changes are:
- de-staticing functions
- I915_GEM_GPU_DOMAINS moving to i915_drv.h to be used by both files.
- i915_gem_add_request had only half its implementation
  copy-and-pasted out of the middle of it.
2010-05-26 12:36:00 -07:00
Chris Wilson
79a78dd626 drm/i915: Fail to load driver if KMS request without GEM
The i915's implementation of KMS requires GEM in order to manage the
memory and execution domains of the framebuffer and associated
resources. By the point at which we detect broken a BIOS and need to
disable GEM, we have already registered ourselves as a KMS driver with
several subsystems. Rather than introducing a fragile unwind and attempt
to continue with UMS, spit out an error and unload the driver.

References:

  [Bug 15754] IP: [<ffffffffa0207589>] drm_mm_search_free+0x49/0x90 [drm]
              BUG: unable to handle kernel NULL pointer dereference at (null)
  https://bugzilla.kernel.org/show_bug.cgi?id=15754

[drm:i915_driver_load] *ERROR* Detected broken video BIOS with
262140/262144kB of video memory stolen.
[drm:i915_driver_load] *ERROR* Disabling GEM. (try reducing stolen
memory or updating the BIOS to fix).
i915 0000:00:02.0: irq 30 for MSI/MSI-X
[drm] set up 255M of stolen space
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa0207589>] drm_mm_search_free+0x49/0x90 [drm]
PGD 69719067 PUD 69dda067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/module/snd_seq_oss/initstate
CPU 1
Pid: 867, comm: modprobe Not tainted 2.6.33-ARCH #1 G43Twins-FullHD/To
Be Filled By O.E.M.
RIP: 0010:[<ffffffffa0207589>]  [<ffffffffa0207589>] drm_mm_search_free+0x49/0x90 [drm]
RSP: 0018:ffff8800699f3af8  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffffffffff RCX: 0000000000000000
RDX: 0000000000001000 RSI: 0000000000001000 RDI: ffff8800693d0f78
RBP: ffff8800699f3b18 R08: 0000000000001000 R09: 0000000000000000
R10: 2222222222222222 R11: 0000000000000000 R12: ffff880068de70c0
R13: 0000000000001000 R14: 0000000000000000 R15: ffff8800689cb000
FS:  00007fa93f4e5700(0000) GS:ffff880001880000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000695a0000 CR4: 00000000000406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 867, threadinfo ffff8800699f2000, task ffff8800694f4740)
Stack:
 ffff880068de73c0 ffff880068de70c0 ffff8800689cb000 0000000000001000
<0> ffff8800699f3b68 ffffffffa0299f63 ffff8800693d0f78 0000120068de70c0
<0> ffff8800689cb000 ffff880068de73c0 ffff880068de70c0 ffff8800689cb000
Call Trace:
 [<ffffffffa0299f63>] i915_gem_object_bind_to_gtt+0x83/0x360 [i915]
 [<ffffffffa029a2e5>] i915_gem_object_pin+0xa5/0xb0 [i915]
 [<ffffffffa029a3c5>] i915_gem_init_ringbuffer+0xd5/0x510 [i915]
 [<ffffffffa028dbee>] i915_driver_load+0x4ce/0xd00 [i915]
 [<ffffffffa0205d37>] ? drm_sysfs_device_add+0x87/0xb0 [drm]
 [<ffffffffa0203363>] ? drm_get_minor+0x1d3/0x330 [drm]
 [<ffffffffa02037e6>] drm_get_dev+0x326/0x580 [drm]
 [<ffffffffa02bc0a5>] i915_pci_probe+0x10/0xd0 [i915]
 [<ffffffff811e98a2>] local_pci_probe+0x12/0x20
 [<ffffffff811ea8e0>] pci_device_probe+0x80/0xb0
 [<ffffffff8127b12a>] ? driver_sysfs_add+0x5a/0x90
 [<ffffffff8127b273>] driver_probe_device+0x93/0x1a0
 [<ffffffff8127b413>] __driver_attach+0x93/0xa0
 [<ffffffff8127b380>] ? __driver_attach+0x0/0xa0
 [<ffffffff8127a8f8>] bus_for_each_dev+0x68/0x90
 [<ffffffff8127b0c9>] driver_attach+0x19/0x20
 [<ffffffff8127a0ad>] bus_add_driver+0xcd/0x2d0
 [<ffffffff8127b718>] driver_register+0x78/0x140
 [<ffffffff811eab91>] __pci_register_driver+0x51/0xd0
 [<ffffffffa02d6000>] ? i915_init+0x0/0x52 [i915]
 [<ffffffffa01fdc31>] drm_init+0x111/0x120 [drm]
 [<ffffffff810eb0cd>] ? register_shrinker+0x4d/0x60
 [<ffffffffa02d6000>] ? i915_init+0x0/0x52 [i915]
 [<ffffffffa02d6050>] i915_init+0x50/0x52 [i915]
 [<ffffffff81002047>] do_one_initcall+0x37/0x1a0
 [<ffffffff8108ed17>] sys_init_module+0xd7/0x250
 [<ffffffff81009fc2>] system_call_fastpath+0x16/0x1b
Code: eb 29 49 8b 41 28 31 d2 49 f7 f5 85 d2 74 39 44 89 c0 29 d0 48 89 c2 48 01 f2 49 39 d2 73 29 0f 1f 00 49 89 da 4c 89 d3 4d 89 d9 <4d> 8b 19 49 39 f9 41 0f 18 0b 74 2b 4d 8b 51 30 4d 89 cc 49 39
RIP  [<ffffffffa0207589>] drm_mm_search_free+0x49/0x90 [drm]
 RSP <ffff8800699f3af8>
CR2: 0000000000000000

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 12:36:00 -07:00
Linus Torvalds
59534f7298 Merge branch 'drm-for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (207 commits)
  drm/radeon/kms/pm/r600: select the mid clock mode for single head low profile
  drm/radeon: fix power supply kconfig interaction.
  drm/radeon/kms: record object that have been list reserved
  drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU.
  drm/radeon/kms: don't default display priority to high on rs4xx
  drm/edid: fix typo in 1600x1200@75 mode
  drm/nouveau: fix i2c-related init table handlers
  drm/nouveau: support init table i2c device identifier 0x81
  drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers
  drm/nouveau: display error message for any failed init table opcode
  drm/nouveau: fix init table handlers to return proper error codes
  drm/nv50: support fractional feedback divider on newer chips
  drm/nv50: fix monitor detection on certain chipsets
  drm/nv50: store full dcb i2c entry from vbios
  drm/nv50: fix suspend/resume with DP outputs
  drm/nv50: output calculated crtc pll when debugging on
  drm/nouveau: dump pll limits entries when debugging is on
  drm/nouveau: bios parser fixes for eDP boards
  drm/nouveau: fix a nouveau_bo dereference after it's been destroyed
  drm/nv40: remove some completed ctxprog TODOs
  ...
2010-05-21 11:14:52 -07:00
Linus Torvalds
f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
Dave Airlie
05ea893c46 Merge remote branch 'anholt/drm-intel-next' into drm-next
* anholt/drm-intel-next: (515 commits)
  drm/i915: Fix out of tree builds
  drm/i915: move fence lru to struct drm_i915_fence_reg
  drm/i915: don't allow tiling changes on pinned buffers v2
  drm/i915: Be extra careful about A/D matching for multifunction SDVO
  drm/i915: Fix DDC bus selection for multifunction SDVO
  drm/i915: cleanup mode setting before unmapping registers
  drm/i915: Make fbc control wrapper functions
  drm/i915: Wait for the GPU whilst shrinking, if truly desperate.
  drm/i915: Use spatio-temporal dithering on PCH
  [MTD] Remove zero-length files mtdbdi.c and internal.ho
  pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs
  libata: Fix several inaccuracies in developer's guide
  slub: Fix bad boundary check in init_kmem_cache_nodes()
  raid6: fix recovery performance regression
  KEYS: call_sbin_request_key() must write lock keyrings before modifying them
  KEYS: Use RCU dereference wrappers in keyring key type code
  KEYS: find_keyring_by_name() can gain access to a freed keyring
  ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)
  ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582
  ALSA: take tu->qlock with irqs disabled
  ...
2010-05-19 09:35:51 +10:00