Since we unconditionally commit the transaction now we no longer need to
run the delayed refs to make sure our total_bytes_pinned value is
uptodate, we can simply commit the transaction. Remove this stage from
the data flushing list.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
may_commit_transaction was introduced before the ticketing
infrastructure existed. There was a problem where we'd legitimately be
out of space, but every reservation would trigger a transaction commit
and then fail. Thus if you had 1000 things trying to make a
reservation, they'd all do the flushing loop and thus commit the
transaction 1000 times before they'd get their ENOSPC.
This helper was introduced to short circuit this, if there wasn't space
that could be reclaimed by committing the transaction then simply ENOSPC
out. This made true ENOSPC tests much faster as we didn't waste a bunch
of time.
However many of our bugs over the years have been from cases where we
didn't account for some space that would be reclaimed by committing a
transaction. The delayed refs rsv space, delayed rsv, many pinned bytes
miscalculations, etc. And in the meantime the original problem has been
solved with ticketing. We no longer will commit the transaction 1000
times. Instead we'll get 1000 waiters, we will go through the flushing
mechanisms, and if there's no progress after 2 loops we ENOSPC everybody
out. The ticketing infrastructure gives us a deterministic way to see
if we're making progress or not, thus we avoid a lot of extra work.
So simplify this step by simply unconditionally committing the
transaction. This removes what is arguably our most common source of
early ENOSPC bugs and will allow us to drastically simplify many of the
things we track because we simply won't need them with this stuff gone.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a send we don't expect the task to ever start a transaction
after the initial check that verifies if commit roots match the regular
roots. This is because after that we set current->journal_info with a
stub (special value) that signals we are in send context, so that we take
a read lock on an extent buffer when reading it from disk and verifying
it is valid (its generation matches the generation stored in the parent).
This stub was introduced in 2014 by commit a26e8c9f75 ("Btrfs: don't
clear uptodate if the eb is under IO") in order to fix a concurrency issue
between send and balance.
However there is one particular exception where we end up needing to start
a transaction and when this happens it results in a crash with a stack
trace like the following:
[60015.902283] kernel: WARNING: CPU: 3 PID: 58159 at arch/x86/include/asm/kfence.h:44 kfence_protect_page+0x21/0x80
[60015.902292] kernel: Modules linked in: uinput rfcomm snd_seq_dummy (...)
[60015.902384] kernel: CPU: 3 PID: 58159 Comm: btrfs Not tainted 5.12.9-300.fc34.x86_64 #1
[60015.902387] kernel: Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XN-WIFI, BIOS F6 12/24/2015
[60015.902389] kernel: RIP: 0010:kfence_protect_page+0x21/0x80
[60015.902393] kernel: Code: ff 0f 1f 84 00 00 00 00 00 55 48 89 fd (...)
[60015.902396] kernel: RSP: 0018:ffff9fb583453220 EFLAGS: 00010246
[60015.902399] kernel: RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9fb583453224
[60015.902401] kernel: RDX: ffff9fb583453224 RSI: 0000000000000000 RDI: 0000000000000000
[60015.902402] kernel: RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[60015.902404] kernel: R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
[60015.902406] kernel: R13: ffff9fb583453348 R14: 0000000000000000 R15: 0000000000000001
[60015.902408] kernel: FS: 00007f158e62d8c0(0000) GS:ffff93bd37580000(0000) knlGS:0000000000000000
[60015.902410] kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[60015.902412] kernel: CR2: 0000000000000039 CR3: 00000001256d2000 CR4: 00000000000506e0
[60015.902414] kernel: Call Trace:
[60015.902419] kernel: kfence_unprotect+0x13/0x30
[60015.902423] kernel: page_fault_oops+0x89/0x270
[60015.902427] kernel: ? search_module_extables+0xf/0x40
[60015.902431] kernel: ? search_bpf_extables+0x57/0x70
[60015.902435] kernel: kernelmode_fixup_or_oops+0xd6/0xf0
[60015.902437] kernel: __bad_area_nosemaphore+0x142/0x180
[60015.902440] kernel: exc_page_fault+0x67/0x150
[60015.902445] kernel: asm_exc_page_fault+0x1e/0x30
[60015.902450] kernel: RIP: 0010:start_transaction+0x71/0x580
[60015.902454] kernel: Code: d3 0f 84 92 00 00 00 80 e7 06 0f 85 63 (...)
[60015.902456] kernel: RSP: 0018:ffff9fb5834533f8 EFLAGS: 00010246
[60015.902458] kernel: RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000
[60015.902460] kernel: RDX: 0000000000000801 RSI: 0000000000000000 RDI: 0000000000000039
[60015.902462] kernel: RBP: ffff93bc0a7eb800 R08: 0000000000000001 R09: 0000000000000000
[60015.902463] kernel: R10: 0000000000098a00 R11: 0000000000000001 R12: 0000000000000001
[60015.902464] kernel: R13: 0000000000000000 R14: ffff93bc0c92b000 R15: ffff93bc0c92b000
[60015.902468] kernel: btrfs_commit_inode_delayed_inode+0x5d/0x120
[60015.902473] kernel: btrfs_evict_inode+0x2c5/0x3f0
[60015.902476] kernel: evict+0xd1/0x180
[60015.902480] kernel: inode_lru_isolate+0xe7/0x180
[60015.902483] kernel: __list_lru_walk_one+0x77/0x150
[60015.902487] kernel: ? iput+0x1a0/0x1a0
[60015.902489] kernel: ? iput+0x1a0/0x1a0
[60015.902491] kernel: list_lru_walk_one+0x47/0x70
[60015.902495] kernel: prune_icache_sb+0x39/0x50
[60015.902497] kernel: super_cache_scan+0x161/0x1f0
[60015.902501] kernel: do_shrink_slab+0x142/0x240
[60015.902505] kernel: shrink_slab+0x164/0x280
[60015.902509] kernel: shrink_node+0x2c8/0x6e0
[60015.902512] kernel: do_try_to_free_pages+0xcb/0x4b0
[60015.902514] kernel: try_to_free_pages+0xda/0x190
[60015.902516] kernel: __alloc_pages_slowpath.constprop.0+0x373/0xcc0
[60015.902521] kernel: ? __memcg_kmem_charge_page+0xc2/0x1e0
[60015.902525] kernel: __alloc_pages_nodemask+0x30a/0x340
[60015.902528] kernel: pipe_write+0x30b/0x5c0
[60015.902531] kernel: ? set_next_entity+0xad/0x1e0
[60015.902534] kernel: ? switch_mm_irqs_off+0x58/0x440
[60015.902538] kernel: __kernel_write+0x13a/0x2b0
[60015.902541] kernel: kernel_write+0x73/0x150
[60015.902543] kernel: send_cmd+0x7b/0xd0
[60015.902545] kernel: send_extent_data+0x5a3/0x6b0
[60015.902549] kernel: process_extent+0x19b/0xed0
[60015.902551] kernel: btrfs_ioctl_send+0x1434/0x17e0
[60015.902554] kernel: ? _btrfs_ioctl_send+0xe1/0x100
[60015.902557] kernel: _btrfs_ioctl_send+0xbf/0x100
[60015.902559] kernel: ? enqueue_entity+0x18c/0x7b0
[60015.902562] kernel: btrfs_ioctl+0x185f/0x2f80
[60015.902564] kernel: ? psi_task_change+0x84/0xc0
[60015.902569] kernel: ? _flat_send_IPI_mask+0x21/0x40
[60015.902572] kernel: ? check_preempt_curr+0x2f/0x70
[60015.902576] kernel: ? selinux_file_ioctl+0x137/0x1e0
[60015.902579] kernel: ? expand_files+0x1cb/0x1d0
[60015.902582] kernel: ? __x64_sys_ioctl+0x82/0xb0
[60015.902585] kernel: __x64_sys_ioctl+0x82/0xb0
[60015.902588] kernel: do_syscall_64+0x33/0x40
[60015.902591] kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae
[60015.902595] kernel: RIP: 0033:0x7f158e38f0ab
[60015.902599] kernel: Code: ff ff ff 85 c0 79 9b (...)
[60015.902602] kernel: RSP: 002b:00007ffcb2519bf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[60015.902605] kernel: RAX: ffffffffffffffda RBX: 00007ffcb251ae00 RCX: 00007f158e38f0ab
[60015.902607] kernel: RDX: 00007ffcb2519cf0 RSI: 0000000040489426 RDI: 0000000000000004
[60015.902608] kernel: RBP: 0000000000000004 R08: 00007f158e297640 R09: 00007f158e297640
[60015.902610] kernel: R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000000
[60015.902612] kernel: R13: 0000000000000002 R14: 00007ffcb251aee0 R15: 0000558c1a83e2a0
[60015.902615] kernel: ---[ end trace 7bbc33e23bb887ae ]---
This happens because when writing to the pipe, by calling kernel_write(),
we end up doing page allocations using GFP_HIGHUSER | __GFP_ACCOUNT as the
gfp flags, which allow reclaim to happen if there is memory pressure. This
allocation happens at fs/pipe.c:pipe_write().
If the reclaim is triggered, inode eviction can be triggered and that in
turn can result in starting a transaction if the inode has a link count
of 0. The transaction start happens early on during eviction, when we call
btrfs_commit_inode_delayed_inode() at btrfs_evict_inode(). This happens if
there is currently an open file descriptor for an inode with a link count
of 0 and the reclaim task gets a reference on the inode before that
descriptor is closed, in which case the reclaim task ends up doing the
final iput that triggers the inode eviction.
When we have assertions enabled (CONFIG_BTRFS_ASSERT=y), this triggers
the following assertion at transaction.c:start_transaction():
/* Send isn't supposed to start transactions. */
ASSERT(current->journal_info != BTRFS_SEND_TRANS_STUB);
And when assertions are not enabled, it triggers a crash since after that
assertion we cast current->journal_info into a transaction handle pointer
and then dereference it:
if (current->journal_info) {
WARN_ON(type & TRANS_EXTWRITERS);
h = current->journal_info;
refcount_inc(&h->use_count);
(...)
Which obviously results in a crash due to an invalid memory access.
The same type of issue can happen during other memory allocations we
do directly in the send code with kmalloc (and friends) as they use
GFP_KERNEL and therefore may trigger reclaim too, which started to
happen since 2016 after commit e780b0d1c1 ("btrfs: send: use
GFP_KERNEL everywhere").
The issue could be solved by setting up a NOFS context for the entire
send operation so that reclaim could not be triggered when allocating
memory or pages through kernel_write(). However that is not very friendly
and we can in fact get rid of the send stub because:
1) The stub was introduced way back in 2014 by commit a26e8c9f75
("Btrfs: don't clear uptodate if the eb is under IO") to solve an
issue exclusive to when send and balance are running in parallel,
however there were other problems between balance and send and we do
not allow anymore to have balance and send run concurrently since
commit 9e967495e0 ("Btrfs: prevent send failures and crashes due
to concurrent relocation"). More generically the issues are between
send and relocation, and that last commit eliminated only the
possibility of having send and balance run concurrently, but shrinking
a device also can trigger relocation, and on zoned filesystems we have
relocation of partially used block groups triggered automatically as
well. The previous patch that has a subject of:
"btrfs: ensure relocation never runs while we have send operations running"
Addresses all the remaining cases that can trigger relocation.
2) We can actually allow starting and even committing transactions while
in a send context if needed because send is not holding any locks that
would block the start or the commit of a transaction.
So get rid of all the logic added by commit a26e8c9f75 ("Btrfs: don't
clear uptodate if the eb is under IO"). We can now always call
clear_extent_buffer_uptodate() at verify_parent_transid() since send is
the only case that uses commit roots without having a transaction open or
without holding the commit_root_sem.
Reported-by: Chris Murphy <lists@colorremedies.com>
Link: https://lore.kernel.org/linux-btrfs/CAJCQCtRQ57=qXo3kygwpwEBOU_CA_eKvdmjP52sU=eFvuVOEGw@mail.gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Relocation and send do not play well together because while send is
running a block group can be relocated, a transaction committed and
the respective disk extents get re-allocated and written to or discarded
while send is about to do something with the extents.
This was explained in commit 9e967495e0 ("Btrfs: prevent send failures
and crashes due to concurrent relocation"), which prevented balance and
send from running in parallel but it did not address one remaining case
where chunk relocation can happen: shrinking a device (and device deletion
which shrinks a device's size to 0 before deleting the device).
We also have now one more case where relocation is triggered: on zoned
filesystems partially used block groups get relocated by a background
thread, introduced in commit 18bb8bbf13 ("btrfs: zoned: automatically
reclaim zones").
So make sure that instead of preventing balance from running when there
are ongoing send operations, we prevent relocation from happening.
This uses the infrastructure recently added by a patch that has the
subject: "btrfs: add cancellable chunk relocation support".
Also it adds a spinlock used exclusively for the exclusivity between
send and relocation, as before fs_info->balance_mutex was used, which
would make an attempt to run send to block waiting for balance to
finish, which can take a lot of time on large filesystems.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Subjectively, CHECK_INTEGRITY_INCLUDING_EXTENT_DATA is quite long and
calling it CHECK_INTEGRITY_DATA still keeps the meaning and matches the
mount option name.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Switch defines of BTRFS_MOUNT_* to an enum (the symbolic names are
recorded in the debugging information for convenience).
There are two more things done but separating them would not make much
sense as it's touching the same lines:
- Renumber shifts 18..31 to 17..30 to get rid of the hole in the
sequence.
- Use 1UL as the value that gets shifted because we're approaching the
32bit limit and due to integer promotions the value of (1 << 31)
becomes 0xffffffff80000000 when cast to unsigned long (eg. the option
manipulating helpers).
This is not causing any problems yet as the operations are in-memory
and masking the 31st bit works, we don't have more than 31 bits so the
ill effects of not masking higher bits don't happen. But once we have
more, the problems will emerge.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Based on user feedback and actual problems with compression property,
there's no support to unset any compression options, or to force no
compression flag.
Note: This has changed recently in e2fsprogs 1.46.2, 'chattr +m'
(setting NOCOMPRESS).
In btrfs properties, the empty value should really mean reset to
defaults, for all properties in general. Right now there's only the
compression one, so this change should not cause too many problems.
Old behaviour:
$ lsattr file
---------------------- file
# the NOCOMPRESS bit is set
$ btrfs prop set file compression ''
$ lsattr file
---------------------m file
This is equivalent to 'btrfs prop set file compression no' in current
btrfs-progs as the 'no' or 'none' values are translated to an empty
string.
This is where the new behaviour is different: empty string drops the
compression flag (-c) and nocompress (-m):
$ lsattr file
---------------------- file
# No change
$ btrfs prop set file compression ''
$ lsattr file
---------------------- file
$ btrfs prop set file compression lzo
$ lsattr file
--------c------------- file
$ btrfs prop get file compression
compression=lzo
$ btrfs prop set file compression ''
# Reset to the initial state
$ lsattr file
---------------------- file
# Set NOCOMPRESS bit
$ btrfs prop set file compression no
$ lsattr file
---------------------m file
This obviously brings problems with backward compatibility, so this
patch should not be backported without making sure the updated
btrfs-progs are also used and that scripts have been updated to use the
new semantics.
Summary:
- old kernel:
no, none, "" - set NOCOMPRESS bit
- new kernel:
no, none - set NOCOMPRESS bit
"" - drop all compression flags, ie. COMPRESS and NOCOMPRESS
Signed-off-by: David Sterba <dsterba@suse.com>
The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.
The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
qgroup_account_snapshot() is trying to unlock the not taken
tree_log_mutex in a error path. Since ret != 0 in this case, we can
just return from here.
Fixes: 2a4d84c11a ("btrfs: move delayed ref flushing for qgroup into qgroup helper")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The device stats can be read by ioctl, wrapped by command 'btrfs device
stats'. Provide another source where to read the information in
/sys/fs/btrfs/FSID/devinfo/DEVID/error_stats . The format is a list of
'key value' pairs one per line, which is common in other stat files.
The names are the same as used in other device stat outputs.
The stats are all in one file as it's the snapshot of all available
stats. The 'one value per file' format is not very suitable here. The
stats should be valid right after the stats item is read from disk,
shortly after initializing the device.
In case the stats are not yet valid, print just 'invalid' as the file
contents.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 8140dc30a4 ("btrfs: btrfs_decompress_bio() could accept
compressed_bio instead"), btrfs_decompress_bio() accepts
"struct compressed_bio" other than open-coded parameter list.
Thus the comments for the parameter list is no longer needed.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_move_tail() instead of list_del() + list_add_tail() as it's
doing the same thing and allows further cleanups. Open code
name_cache_used() as there is only one user.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With a config having PAGE_SIZE set to 256K, BTRFS build fails
with the following message
include/linux/compiler_types.h:326:38: error: call to
'__compiletime_assert_791' declared with attribute error:
BUILD_BUG_ON failed: (BTRFS_MAX_COMPRESSED % PAGE_SIZE) != 0
BTRFS_MAX_COMPRESSED being 128K, BTRFS cannot support platforms with
256K pages at the time being.
There are two platforms that can select 256K pages:
- hexagon
- powerpc
Disable BTRFS when 256K page size is selected. Supporting this would
require changes to the subpage mode that's currently being developed.
Given that 256K is many times larger than page sizes commonly used and
for what the algorithms and structures have been tuned, it's out of
scope and disabling build is a reasonable option.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
During an incremental send operation, when processing the new references
for the current inode, we might send an unlink operation for another inode
that has a conflicting path and has more than one hard link. However this
path was computed and cached before we processed previous new references
for the current inode. We may have orphanized a directory of that path
while processing a previous new reference, in which case the path will
be invalid and cause the receiver process to fail.
The following reproducer triggers the problem and explains how/why it
happens in its comments:
$ cat test-send-unlink.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# Create our test files and directory. Inode 259 (file3) has two hard
# links.
touch $MNT/file1
touch $MNT/file2
touch $MNT/file3
mkdir $MNT/A
ln $MNT/file3 $MNT/A/hard_link
# Filesystem looks like:
#
# . (ino 256)
# |----- file1 (ino 257)
# |----- file2 (ino 258)
# |----- file3 (ino 259)
# |----- A/ (ino 260)
# |---- hard_link (ino 259)
#
# Now create the base snapshot, which is going to be the parent snapshot
# for a later incremental send.
btrfs subvolume snapshot -r $MNT $MNT/snap1
btrfs send -f /tmp/snap1.send $MNT/snap1
# Move inode 257 into directory inode 260. This results in computing the
# path for inode 260 as "/A" and caching it.
mv $MNT/file1 $MNT/A/file1
# Move inode 258 (file2) into directory inode 260, with a name of
# "hard_link", moving first inode 259 away since it currently has that
# location and name.
mv $MNT/A/hard_link $MNT/tmp
mv $MNT/file2 $MNT/A/hard_link
# Now rename inode 260 to something else (B for example) and then create
# a hard link for inode 258 that has the old name and location of inode
# 260 ("/A").
mv $MNT/A $MNT/B
ln $MNT/B/hard_link $MNT/A
# Filesystem now looks like:
#
# . (ino 256)
# |----- tmp (ino 259)
# |----- file3 (ino 259)
# |----- B/ (ino 260)
# | |---- file1 (ino 257)
# | |---- hard_link (ino 258)
# |
# |----- A (ino 258)
# Create another snapshot of our subvolume and use it for an incremental
# send.
btrfs subvolume snapshot -r $MNT $MNT/snap2
btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2
# Now unmount the filesystem, create a new one, mount it and try to
# apply both send streams to recreate both snapshots.
umount $DEV
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# First add the first snapshot to the new filesystem by applying the
# first send stream.
btrfs receive -f /tmp/snap1.send $MNT
# The incremental receive operation below used to fail with the
# following error:
#
# ERROR: unlink A/hard_link failed: No such file or directory
#
# This is because when send is processing inode 257, it generates the
# path for inode 260 as "/A", since that inode is its parent in the send
# snapshot, and caches that path.
#
# Later when processing inode 258, it first processes its new reference
# that has the path of "/A", which results in orphanizing inode 260
# because there is a a path collision. This results in issuing a rename
# operation from "/A" to "/o260-6-0".
#
# Finally when processing the new reference "B/hard_link" for inode 258,
# it notices that it collides with inode 259 (not yet processed, because
# it has a higher inode number), since that inode has the name
# "hard_link" under the directory inode 260. It also checks that inode
# 259 has two hardlinks, so it decides to issue a unlink operation for
# the name "hard_link" for inode 259. However the path passed to the
# unlink operation is "/A/hard_link", which is incorrect since currently
# "/A" does not exists, due to the orphanization of inode 260 mentioned
# before. The path is incorrect because it was computed and cached
# before the orphanization. This results in the receiver to fail with
# the above error.
btrfs receive -f /tmp/snap2.send $MNT
umount $MNT
When running the test, it fails like this:
$ ./test-send-unlink.sh
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
At subvol /mnt/sdi/snap1
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
At subvol /mnt/sdi/snap2
At subvol snap1
At snapshot snap2
ERROR: unlink A/hard_link failed: No such file or directory
Fix this by recomputing a path before issuing an unlink operation when
processing the new references for the current inode if we previously
have orphanized a directory.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function wait_current_trans_commit_start is now fairly trivial so it can
be inlined in its only caller.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one caller left btrfs_ioctl_start_sync that passes 0, so we
can remove the switch in btrfs_commit_transaction_async.
A cleanup 9babda9f33 ("btrfs: Remove async_transid from
btrfs_mksubvol/create_subvol/create_snapshot") removed calls that passed
1, so this is a followup.
As this removes last call of wait_current_trans_commit_start_and_unblock,
remove the function as well.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
clang warns:
fs/btrfs/delayed-inode.c:684:6: warning: variable 'total_data_size' set
but not used [-Wunused-but-set-variable]
int total_data_size = 0, total_size = 0;
^
1 warning generated.
This variable's value has been unused since commit fc0d82e103 ("btrfs:
sink total_data parameter in setup_items_for_insert"). Eliminate it.
Link: https://github.com/ClangBuiltLinux/linux/issues/1391
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
By way of inverting the list_empty conditional the insert label can be
eliminated, making the function's flow entirely linear.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a very rare ASSERT() triggering during full fstests run for
subpage rw support.
No other reproducer so far.
The ASSERT() gets triggered for metadata read in
btrfs_page_set_uptodate() inside end_page_read().
[CAUSE]
There is still a small race window for metadata only, the race could
happen like this:
T1 | T2
------------------------------------+-----------------------------
end_bio_extent_readpage() |
|- btrfs_validate_metadata_buffer() |
| |- free_extent_buffer() |
| Still have 2 refs |
|- end_page_read() |
|- if (unlikely(PagePrivate()) |
| The page still has Private |
| | free_extent_buffer()
| | | Only one ref 1, will be
| | | released
| | |- detach_extent_buffer_page()
| | |- btrfs_detach_subpage()
|- btrfs_set_page_uptodate() |
The page no longer has Private|
>>> ASSERT() triggered <<< |
This race window is super small, thus pretty hard to hit, even with so
many runs of fstests.
But the race window is still there, we have to go another way to solve
it other than relying on random PagePrivate() check.
Data path is not affected, as it will lock the page before reading,
while unlocking the page after the last read has finished, thus no race
window.
[FIX]
This patch will fix the bug by repurposing btrfs_subpage::readers.
Now btrfs_subpage::readers will be a member shared by both metadata and
data.
For metadata path, we don't do the page unlock as metadata only relies
on extent locking.
At the same time, teach page_range_has_eb() to take
btrfs_subpage::readers into consideration.
So that even if the last eb of a page gets freed, page::private won't be
detached as long as there still are pending end_page_read() calls.
By this we eliminate the race window, this will slight increase the
metadata memory usage, as the page may not be released as frequently as
usual. But it should not be a big deal.
The code got introduced in ("btrfs: submit read time repair only for
each corrupted sector"), but the fix is in a separate patch to keep the
problem description and the crash is rare so it should not hurt
bisectability.
Signed-off-by: Qu Wegruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With current btrfs subpage rw support, the following script can lead to
fs hang:
$ mkfs.btrfs -f -s 4k $dev
$ mount $dev -o nospace_cache $mnt
$ fsstress -w -n 100 -p 1 -s 1608140256 -v -d $mnt
The fs will hang at btrfs_start_ordered_extent().
[CAUSE]
In above test case, btrfs_invalidate() will be called with the following
parameters:
offset = 0 length = 53248 page dirty = 1 subpage dirty bitmap = 0x2000
Since @offset is 0, btrfs_invalidate() will try to invalidate the full
page, and finally call clear_page_extent_mapped() which will detach
subpage structure from the page.
And since the page no longer has subpage structure, the subpage dirty
bitmap will be cleared, preventing the dirty range from being written
back, thus no way to wake up the ordered extent.
[FIX]
Just follow other filesystems, only to invalidate the page if the range
covers the full page.
There are cases like truncate_setsize() which can call
btrfs_invalidatepage() with offset == 0 and length != 0 for the last
page of an inode.
Although the old code will still try to invalidate the full page, we are
still safe to just wait for ordered extent to finish.
So it shouldn't cause extra problems.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With current subpage RW support, the following script can hang the fs
with 64K page size.
# mkfs.btrfs -f -s 4k $dev
# mount $dev -o nospace_cache $mnt
# fsstress -w -n 50 -p 1 -s 1607749395 -d $mnt
The kernel will do an infinite loop in btrfs_punch_hole_lock_range().
[CAUSE]
In btrfs_punch_hole_lock_range() we:
- Truncate page cache range
- Lock extent io tree
- Wait any ordered extents in the range.
We exit the loop until we meet all the following conditions:
- No ordered extent in the lock range
- No page is in the lock range
The latter condition has a pitfall, it only works for sector size ==
PAGE_SIZE case.
While can't handle the following subpage case:
0 32K 64K 96K 128K
| |///////||//////| ||
lockstart=32K
lockend=96K - 1
In this case, although the range crosses 2 pages,
truncate_pagecache_range() will invalidate no page at all, but only zero
the [32K, 96K) range of the two pages.
Thus filemap_range_has_page(32K, 96K-1) will always return true, thus we
will never meet the loop exit condition.
[FIX]
Fix the problem by doing page alignment for the lock range.
Function filemap_range_has_page() has already handled lend < lstart
case, we only need to round up @lockstart, and round_down @lockend for
truncate_pagecache_range().
This modification should not change any thing for sector size ==
PAGE_SIZE case, as in that case our range is already page aligned.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The modifications are:
- Page copy destination
For subpage case, one page can contain multiple sectors, thus we can
no longer expect the memcpy_to_page()/btrfs_decompress() to copy
data into page offset 0.
The correct offset is offset_in_page(file_offset) now, which should
handle both regular sectorsize and subpage cases well.
- Page status update
Now we need to use subpage helper to handle the page status update.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Only set_page_dirty() and SetPageUptodate() is not subpage compatible.
Convert them to subpage helpers, so that __extent_writepage_io() can
submit page content correctly.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_truncate_block() itself is already mostly subpage compatible, the
only missing part is the page dirtying code.
Currently if we have a sector that needs to be truncated, we set the
sector aligned range delalloc, then set the full page dirty.
The problem is, current subpage code requires subpage dirty bit to be
set, or __extent_writepage_io() won't submit bio, thus leads to ordered
extent never to finish.
So this patch will make btrfs_truncate_block() to call
btrfs_page_set_dirty() helper to replace set_page_dirty() to fix the
problem.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__extent_writepage_io() function originally just iterates through all
the extent maps of a page, and submits any regular extents.
This is fine for sectorsize == PAGE_SIZE case, as if a page is dirty, we
need to submit the only sector contained in the page.
But for subpage case, one dirty page can contain several clean sectors
with at least one dirty sector.
If __extent_writepage_io() still submit all regular extent maps, it can
submit data which is already written to disk.
And since such already written data won't have corresponding ordered
extents, it will trigger a BUG_ON() in btrfs_csum_one_bio().
Change the behavior of __extent_writepage_io() by finding the first
dirty byte in the page, and only submit the dirty range other than the
full extent.
Since we're also here, also modify the following calls to be subpage
compatible:
- SetPageError()
- end_page_writeback()
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_set_range_writeback() currently just sets the page
writeback unconditionally.
Change it to call the subpage helper so that we can handle both cases
well.
Since the subpage helpers needs btrfs_fs_info, also change the parameter
to accept btrfs_inode.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In cow_file_range(), after we have succeeded creating an inline extent,
we unlock the page with extent_clear_unlock_delalloc() by passing
locked_page == NULL.
For sectorsize == PAGE_SIZE case, this is just making the page lock and
unlock harder to grab.
But for incoming subpage case, it can be a big problem.
For incoming subpage case, page locking have two entry points:
- __process_pages_contig()
In that case, we know exactly the range we want to lock (which only
requires sector alignment).
To handle the subpage requirement, we introduce btrfs_subpage::writers
to page::private, and will update it in __process_pages_contig().
- Other directly lock/unlock_page() call sites
Those won't touch btrfs_subpage::writers at all.
This means, page locked by __process_pages_contig() can only be unlocked
by __process_pages_contig().
Thankfully we already have the existing infrastructure in the form of
@locked_page in various call sites.
Unfortunately, extent_clear_unlock_delalloc() in cow_file_range() after
creating an inline extent is the exception.
It intentionally call extent_clear_unlock_delalloc() with locked_page ==
NULL, to also unlock current page (and clear its dirty/writeback bits).
To co-operate with incoming subpage modifications, and make the page
lock/unlock pair easier to understand, this patch will still call
extent_clear_unlock_delalloc() with locked_page, and only unlock the
page in __extent_writepage().
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When __process_pages_contig() gets called for
extent_clear_unlock_delalloc(), if we hit the locked page, only Private2
bit is updated, but dirty/writeback/error bits are all skipped.
There are several call sites that call extent_clear_unlock_delalloc()
with locked_page and PAGE_CLEAR_DIRTY/PAGE_SET_WRITEBACK/PAGE_END_WRITEBACK
- cow_file_range()
- run_delalloc_nocow()
- cow_file_range_async()
All for their error handling branches.
For those call sites, since we skip the locked page for
dirty/error/writeback bit update, the locked page will still have its
subpage dirty bit remaining.
Normally it's the call sites which locked the page to handle the locked
page, but it won't hurt if we also do the update.
Especially there are already other call sites doing the same thing by
manually passing NULL as locked_page.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This involves the following modification:
- Ordered extent creation
This is done in process_one_page(), now PAGE_SET_ORDERED will call
subpage helper to do the work.
- endio functions
This is done in btrfs_mark_ordered_io_finished().
- btrfs_invalidatepage()
- btrfs_cleanup_ordered_extents()
Use the subpage page helper, and add an extra branch to exit if the
locked page have covered the full range.
Now the usage of page Ordered flag for ordered extent accounting is fully
subpage compatible.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces the following functions to handle btrfs subpage
ordered (Private2) status:
- btrfs_subpage_set_ordered()
- btrfs_subpage_clear_ordered()
- btrfs_subpage_test_ordered()
These helpers can only be called when the range is ensured to be
inside the page.
- btrfs_page_set_ordered()
- btrfs_page_clear_ordered()
- btrfs_page_test_ordered()
These helpers can handle both regular sector size and subpage without
problem.
These functions are here to coordinate btrfs_invalidatepage() with
btrfs_writepage_endio_finish_ordered(), to make sure only one of those
functions can finish the ordered extent.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new data inodes specific subpage member, writers, to record
how many sectors are under page lock for delalloc writing.
This member acts pretty much the same as readers, except it's only for
delalloc writes.
This is important for delalloc code to trace which page can really be
freed, as we have cases like run_delalloc_nocow() where we may exit
processing nocow range inside a page, but need to exit to do cow half
way.
In that case, we need a way to determine if we can really unlock a full
page.
With the new btrfs_subpage::writers, there is a new requirement:
- Page locked by process_one_page() must be unlocked by
process_one_page()
There are still tons of call sites manually lock and unlock a page,
without updating btrfs_subpage::writers.
So if we lock a page through process_one_page() then it must be
unlocked by process_one_page() to keep btrfs_subpage::writers
consistent.
This will be handled in next patch.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now in end_bio_extent_writepage(), the only subpage incompatible code is
the end_page_writeback().
Just call the subpage helpers.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For __process_pages_contig() and process_one_page(), to handle subpage
we only need to pass bytenr in and call subpage helpers to handle
dirty/error/writeback status.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the extent io tree operations in btrfs_dirty_pages() are already
subpage compatible, we only need to make the page status update to use
subpage helpers.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just like read page, for subpage support we only require sector size
alignment.
So change the error message condition to only require sector alignment.
This should not affect existing code, as for regular sectorsize ==
PAGE_SIZE case, we are still requiring page alignment.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the coming subpage RW supports, there are a lot of page status update
calls which need to be converted to subpage compatible version, which
needs @start and @len.
Some call sites already have such @start/@len and are already in
page range, like various endio functions.
But there are also call sites which need to clamp the range for subpage
case, like btrfs_dirty_pagse() and __process_contig_pages().
Here we introduce new helpers, btrfs_page_clamp_*(), to do and only do the
clamp for subpage version.
Although in theory all existing btrfs_page_*() calls can be converted to
use btrfs_page_clamp_*() directly, but that would make us to do
unnecessary clamp operations.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In __process_pages_contig() we update page status according to page_ops.
That update process is a bunch of 'if' branches, which lie inside
two loops, this makes it pretty hard to expand for later subpage
operations.
So this patch will extract these operations into its own function,
process_one_pages().
Also since we're refactoring __process_pages_contig(), also move the new
helper and __process_pages_contig() before the first caller of them, to
remove the forward declaration.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As a preparation for incoming subpage support, we need bytenr passed to
__process_pages_contig() directly, not the current page index.
So change the parameter and all callers to pass bytenr in.
With the modification, here we need to replace the old @index_ret with
@processed_end for __process_pages_contig(), but this brings a small
problem.
Normally we follow the inclusive return value, meaning @processed_end
should be the last byte we processed.
If parameter @start is 0, and we failed to lock any page, then we would
return @processed_end as -1, causing more problems for
__unlock_for_delalloc().
So here for @processed_end, we use two different return value patterns.
If we have locked any page, @processed_end will be the last byte of
locked page.
Or it will be @start otherwise.
This change will impact lock_delalloc_pages(), so it needs to check
@processed_end to only unlock the range if we have locked any.
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running subpage preparation patches on x86, btrfs/125 will hang
forever with one ordered extent never finished.
[CAUSE]
The test case btrfs/125 itself will always fail as the fix is never merged.
When the test fails at balance, btrfs needs to cleanup the ordered
extent in btrfs_cleanup_ordered_extents() for data reloc inode.
The problem is in the sequence how we cleanup the page Order bit.
Currently it works like:
btrfs_cleanup_ordered_extents()
|- find_get_page();
|- btrfs_page_clear_ordered(page);
| Now the page doesn't have Ordered bit anymore.
| !!! This also includes the first (locked) page !!!
|
|- offset += PAGE_SIZE
| This is to skip the first page
|- __endio_write_update_ordered()
|- btrfs_mark_ordered_io_finished(NULL)
Except the first page, all ordered extents are finished.
Then the locked page is cleaned up in __extent_writepage():
__extent_writepage()
|- If (PageError(page))
|- end_extent_writepage()
|- btrfs_mark_ordered_io_finished(page)
|- if (btrfs_test_page_ordered(page))
|- !!! The page gets skipped !!!
The ordered extent is not decreased as the page doesn't
have ordered bit anymore.
This leaves the ordered extent with bytes_left == sectorsize, thus never
finish.
[FIX]
The fix is to ensure we never clear page Ordered bit without running the
ordered extent accounting.
Here we choose to skip the locked page in
btrfs_cleanup_ordered_extents() so that later end_extent_writepage() can
properly finish the ordered extent.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside btrfs we use Private2 page status to indicate we have an ordered
extent with pending IO for the sector.
But the page status name, Private2, tells us nothing about the bit
itself, so this patch will rename it to Ordered.
And with extra comment about the bit added, so reader who is still
uncertain about the page Ordered status, will find the comment pretty
easily.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will refactor btrfs_invalidatepage() for the incoming subpage
support.
The involved modifications are:
- Use while() loop instead of "goto again;"
- Use single variable to determine whether to delete extent states
Each branch will also have comments why we can or cannot delete the
extent states
- Do qgroup free and extent states deletion per-loop
Current code can only work for PAGE_SIZE == sectorsize case.
This refactor also makes it clear what we do for different sectors:
- Sectors without ordered extent
We're completely safe to remove all extent states for the sector(s)
- Sectors with ordered extent, but no Private2 bit
This means the endio has already been executed, we can't remove all
extent states for the sector(s).
- Sectors with ordere extent, still has Private2 bit
This means we need to decrease the ordered extent accounting.
And then it comes to two different variants:
* We have finished and removed the ordered extent
Then it's the same as "sectors without ordered extent"
* We didn't finished the ordered extent
We can remove some extent states, but not all.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we already have btrfs_lookup_first_ordered_extent() and
btrfs_lookup_ordered_extent(), they all have their own limitations:
- btrfs_lookup_ordered_extent() can't do extra range check
It's only designed to lookup any ordered extent before certain bytenr.
- btrfs_lookup_first_ordered_extent() may not return the first ordered
extent in the range
It doesn't ensure the first ordered extent is returned.
The existing callers are only interested in exhausting all ordered
extents in a range, the order is not important.
For incoming btrfs_invalidatepage() refactoring, we need a way to
properly iterate all ordered extents in their bytenr order of a range.
So this patch will introduce a new function,
btrfs_lookup_first_ordered_range(), to do ordered extent with bytenr
order awareness and extra range check.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The existing comments in btrfs_invalidatepage() don't really get to the
point, especially for what Private2 is really representing and how the
race avoidance is done.
The truth is, there are only three entrances to do ordered extent
accounting:
- btrfs_writepage_endio_finish_ordered()
- __endio_write_update_ordered()
Those two entrance are just endio functions for dio and buffered
write.
- btrfs_invalidatepage()
But there is a pitfall, in endio functions there is no check on whether
the ordered extent is already accounted.
They just blindly clear the Private2 bit and do the accounting.
So it's all btrfs_invalidatepage()'s responsibility to make sure we
won't do double account for the same sector.
That's why in btrfs_invalidatepage() we have to wait for page writeback,
this will ensure all submitted bios have finished, thus their endio
functions have finished the accounting on the ordered extent.
Then we also check page Private2 to ensure that, we only run ordered
extent accounting on pages who has no bio submitted.
This patch will rework related comments to make it more clear on the
race and how we use wait_on_page_writeback() and Private2 to prevent
double accounting on ordered extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs has two endio functions to mark certain io range finished for
ordered extents:
- __endio_write_update_ordered()
This is for direct IO
- btrfs_writepage_endio_finish_ordered()
This for buffered IO.
However they go different routines to handle ordered extent io:
- Whether to iterate through all ordered extents
__endio_write_update_ordered() will but
btrfs_writepage_endio_finish_ordered() will not.
In fact, iterating through all ordered extents will benefit later
subpage support, while for current PAGE_SIZE == sectorsize requirement
this behavior makes no difference.
- Whether to update page Private2 flag
__endio_write_update_ordered() will not update page Private2 flag as
for iomap direct IO, the page can not be even mapped.
While btrfs_writepage_endio_finish_ordered() will clear Private2 to
prevent double accounting against btrfs_invalidatepage().
Those differences are pretty subtle, and the ordered extent iterations
code in callers makes code much harder to read.
So this patch will introduce a new function,
btrfs_mark_ordered_io_finished(), to do the heavy lifting:
- Iterate through all ordered extents in the range
- Do the ordered extent accounting
- Queue the work for finished ordered extent
This function has two new feature:
- Proper underflow detection and recovery
The old underflow detection will only detect the problem, then
continue.
No proper info like root/inode/ordered extent info, nor noisy enough
to be caught by fstests.
Furthermore when underflow happens, the ordered extent will never
finish.
New error detection will reset the bytes_left to 0, do proper
kernel warning, and output extra info including root, ino, ordered
extent range, the underflow value.
- Prevent double accounting based on Private2 flag
Now if we find a range without Private2 flag, we will skip to next
range.
As that means someone else has already finished the accounting of
ordered extent.
This makes no difference for current code, but will be a critical part
for incoming subpage support, as we can call
btrfs_mark_ordered_io_finished() for multiple sectors if they are
beyond inode size.
Thus such double accounting prevention is a key feature for subpage.
Now both endio functions only need to call that new function.
And since the only caller of btrfs_dec_test_first_ordered_pending() is
removed, also remove btrfs_dec_test_first_ordered_pending() completely.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use page Private2 bit to indicate that we have ordered
extent for the page range.
But the lifespan of it is not consistent, during regular writeback path,
there are two locations to clear the same PagePrivate2:
T ----- Page marked Dirty
|
+ ----- Page marked Private2, through btrfs_run_dealloc_range()
|
+ ----- Page cleared Private2, through btrfs_writepage_cow_fixup()
| in __extent_writepage_io()
| ^^^ Private2 cleared for the first time
|
+ ----- Page marked Writeback, through btrfs_set_range_writeback()
| in __extent_writepage_io().
|
+ ----- Page cleared Private2, through
| btrfs_writepage_endio_finish_ordered()
| ^^^ Private2 cleared for the second time.
|
+ ----- Page cleared Writeback, through
btrfs_writepage_endio_finish_ordered()
Currently PagePrivate2 is mostly to prevent ordered extent accounting
being executed for both endio and invalidatepage.
Thus only the one who cleared page Private2 is responsible for ordered
extent accounting.
But the fact is, in btrfs_writepage_endio_finish_ordered(), page
Private2 is cleared and ordered extent accounting is executed
unconditionally.
The race prevention only happens through btrfs_invalidatepage(), where
we wait for the page writeback first, before checking the Private2 bit.
This means, Private2 is also protected by Writeback bit, and there is no
need for btrfs_writepage_cow_fixup() to clear Priavte2.
This patch will change btrfs_writepage_cow_fixup() to just check
PagePrivate2, not to clear it.
The clearing will happen in either btrfs_invalidatepage() or
btrfs_writepage_endio_finish_ordered().
This makes the Private2 bit easier to understand, just meaning the page
has unfinished ordered extent attached to it.
And this patch is a hard requirement for the incoming refactoring for
how we finished ordered IO for endio context, as the coming patch will
check Private2 to determine if we need to do the ordered extent
accounting. Thus this patch is definitely needed or we will hang due to
unfinished ordered extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a pretty bad abuse of btrfs_writepage_endio_finish_ordered() in
end_compressed_bio_write().
It passes compressed pages to btrfs_writepage_endio_finish_ordered(),
which is only supposed to accept inode pages.
Thankfully the important info here is the inode, so let's pass
btrfs_inode directly into btrfs_writepage_endio_finish_ordered(), and
make @page parameter optional.
By this, end_compressed_bio_write() can happily pass page=NULL while
still getting everything done properly.
Also, to cooperate with such modification, replace @page parameter for
trace_btrfs_writepage_end_io_hook() with btrfs_inode.
Although this removes page_index info, the existing start/len should be
enough for most usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For subpage metadata, we're reusing two functions for subpage metadata
write:
- end_bio_extent_buffer_writepage()
- write_one_eb()
But the truth is, for subpage we just call
end_bio_subpage_eb_writepage() without using any bit in
end_bio_extent_buffer_writepage().
For write_one_eb(), it's pretty similar, but with a small part of code
reused.
There is really no need to pollute the existing code path if we're not
really using most of them.
So this patch will do the following change to separate the subpage
metadata write path from regular write path by:
- Use end_bio_subpage_eb_writepage() directly as endio in
write_one_subpage_eb()
- Directly call write_one_subpage_eb() in submit_eb_subpage()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a lot of code inside extent_io.c needs both "struct bio
**bio_ret" and "unsigned long prev_bio_flags", along with some
parameters like "unsigned long bio_flags".
Such strange parameters are here for bio assembly.
For example, we have such inode page layout:
0 4K 8K 12K
|<-- Extent A-->|<- EB->|
Then what we do is:
- Page [0, 4K)
*bio_ret = NULL
So we allocate a new bio to bio_ret,
Add page [0, 4K) to *bio_ret.
- Page [4K, 8K)
*bio_ret != NULL
We found this page is continuous to *bio_ret,
and if we're not at stripe boundary, we
add page [4K, 8K) to *bio_ret.
- Page [8K, 12K)
*bio_ret != NULL
But we found this page is not continuous, so
we submit *bio_ret, then allocate a new bio,
and add page [8K, 12K) to the new bio.
This means we need to record both the bio and its bio_flag, but we
record them manually using those strange parameter list, other than
encapsulating them into their own structure.
So this patch will introduce a new structure, btrfs_bio_ctrl, to record
both the bio, and its bio_flags.
Also, in above case, for all pages added to the bio, we need to check if
the new page crosses stripe boundary. This check itself can be time
consuming, and we don't really need to do that for each page.
This patch also integrates the stripe boundary check into btrfs_bio_ctrl.
When a new bio is allocated, the stripe and ordered extent boundary is
also calculated, so no matter how large the bio will be, we only
calculate the boundaries once, to save some CPU time.
The following functions/structures are affected:
- struct extent_page_data
Replace its bio pointer with structure btrfs_bio_ctrl (embedded
structure, not pointer)
- end_write_bio()
- flush_write_bio()
Just change how bio is fetched
- btrfs_bio_add_page()
Use pre-calculated boundaries instead of re-calculating them.
And use @bio_ctrl to replace @bio and @prev_bio_flags.
- calc_bio_boundaries()
New function
- submit_extent_page() callers
- btrfs_do_readpage() callers
- contiguous_readpages() callers
To Use @bio_ctrl to replace @bio and @prev_bio_flags, and how to grab
bio.
- btrfs_bio_fits_in_ordered_extent()
Removed, as now the ordered extent size limit is done at bio
allocation time, no need to check for each page range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_bio_fits_in_stripe() now requires a bio with at least one
page added. Or btrfs_get_chunk_map() will fail with -ENOENT.
But in fact this requirement is not needed at all, as we can just pass
sectorsize for btrfs_get_chunk_map().
This tiny behavior change is important for later subpage refactoring on
submit_extent_page().
As for 64K page size, we can have a page range with pgoff=0 and size=64K.
If the logical bytenr is just 16K before the stripe boundary, we have to
split the page range into two bios.
This means, we must check page range against stripe boundary, even adding
the range to an empty bio.
This tiny refactoring is for the incoming changes, but on its own,
regular sectorsize == PAGE_SIZE is not affected anyway.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
