Add support for MHI endpoint power_down that includes stopping all
available channels, destroying the channels, resetting the event and
transfer rings and freeing the host cache.
The stack will be powered down whenever the physical bus link goes down.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for MHI endpoint power_up that includes initializing the MMIO
and rings, caching the host MHI registers, and setting the MHI state to M0.
After registering the MHI EP controller, the stack has to be powered up
for usage.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for processing MHI endpoint interrupts such as control
interrupt, command interrupt and channel interrupt from the host.
The interrupts will be generated in the endpoint device whenever host
writes to the corresponding doorbell registers. The doorbell logic
is handled inside the hardware internally.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for managing the MHI state machine by controlling the state
transitions. Only the following MHI state transitions are supported:
1. Ready state
2. M0 state
3. M3 state
4. SYS_ERR state
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for sending the events to the host over MHI bus from the
endpoint. Following events are supported:
1. Transfer completion event
2. Command completion event
3. State change event
4. Execution Environment (EE) change event
An event is sent whenever an operation has been completed in the MHI EP
device. Event is sent using the MHI event ring and additionally the host
is notified using an IRQ if required.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for managing the MHI ring. The MHI ring is a circular queue
of data structures used to pass the information between host and the
endpoint.
MHI support 3 types of rings:
1. Transfer ring
2. Event ring
3. Command ring
All rings reside inside the host memory and the MHI EP device maps it to
the device memory using blocks like PCIe iATU. The mapping is handled in
the MHI EP controller driver itself.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for managing the Memory Mapped Input Output (MMIO) registers
of the MHI bus. All MHI operations are carried out using the MMIO registers
by both host and the endpoint device.
The MMIO registers reside inside the endpoint device memory (fixed
location based on the platform) and the address is passed by the MHI EP
controller driver during its registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for creating and destroying MHI endpoint devices.
The MHI endpoint devices binds to the MHI endpoint channels and are used
to transfer data between MHI host and endpoint device.
There is a single MHI EP device for each channel pair. The devices will be
created when the corresponding channels has been started by the host and
will be destroyed during MHI EP power down and reset.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for registering MHI endpoint client drivers
with the MHI endpoint stack. MHI endpoint client drivers bind to one
or more MHI endpoint devices inorder to send and receive the upper-layer
protocol packets like IP packets, modem control messages, and
diagnostics messages over MHI bus.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for registering MHI endpoint controller drivers
with the MHI endpoint stack. MHI endpoint controller drivers manage
the interaction with the host machines (such as x86). They are also the
MHI endpoint bus master in charge of managing the physical link between
the host and endpoint device. Eventhough the MHI spec is bus agnostic,
the current implementation is entirely based on PCIe bus.
The endpoint controller driver encloses all information about the
underlying physical bus like PCIe. The registration process involves
parsing the channel configuration and allocating an MHI EP device.
Channels used in the endpoint stack follows the perspective of the MHI
host stack. i.e.,
UL - From host to endpoint
DL - From endpoint to host
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code is really spurious.
It always returns an ERR_PTR, even when err is known to be 0 and calls
put_device() after a successful device_register() call.
It is likely that the return statement in the normal path is missing.
Add 'return rdev;' to fix it.
Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr
MV32-WA is designed based on Qualcomm SDX62, and
MV32-WB is designed based on QUalcomm SDX65. Both
products' enumeration would align with previous
product MV31-W.So we merge MV31 and MV32 to MV3X
for some common settings.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220421092141.3984-1-slark_xiao@163.com
[mani: removed the fixes tag that's not needed]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
As of now, MMIO writes done after ready state transition use the
mhi_write_reg_field() API even though the whole register is being
written in most cases. Optimize this process by using mhi_write_reg()
API instead for those writes and use the mhi_write_reg_field()
API for MHI config registers only.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650304226-11080-3-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Helper API to write register fields relies on successful reads
of the register/address prior to the write. Bail out if a failure
is seen when reading the register before the actual write is
performed.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650304226-11080-2-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
After the device has signaled the end of reset by clearing the reset bit,
it will automatically reinit MHI and the internal device structures. Once
That is done, the device will signal it has entered the ready state.
Signaling the ready state involves sending an interrupt (MSI) to the host
which might cause IOMMU faults if it occurs at the wrong time.
If the controller is being powered down, and possibly removed, then the
reset flow would only wait for the end of reset. At which point, the host
and device would start a race. The host may complete its reset work, and
remove the interrupt handler, which would cause the interrupt to be
disabled in the IOMMU. If that occurs before the device signals the ready
state, then the IOMMU will fault since it blocked an interrupt. While
harmless, the fault would appear like a serious issue has occurred so let's
silence it by making sure the device hits the ready state before the host
completes its reset processing.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650302562-30964-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The MHI bus supports a standardized hardware reset, which is known as the
"SoC Reset". This reset is similar to the reset sysfs for PCI devices -
a hardware mechanism to reset the state back to square one.
The MHI SoC Reset is described in the spec as a reset of last resort. If
some unrecoverable error has occurred where other resets have failed, SoC
Reset is the "big hammer" that ungracefully resets the device. This is
effectivly the same as yanking the power on the device, and reapplying it.
However, depending on the nature of the particular issue, the underlying
transport link may remain active and configured. If the link remains up,
the device will flag a MHI system error early in the boot process after
the reset is executed, which allows the MHI bus to process a fatal error
event, and clean up appropiately.
While the SoC Reset is generally intended as a means of recovery when all
else has failed, it can be useful in non-error scenarios. For example,
if the device loads firmware from the host filesystem, the device may need
to be fully rebooted inorder to pick up the new firmware. In this
scenario, the system administrator may use the soc_reset sysfs to cause
the device to pick up the new firmware that the admin placed on the
filesystem.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Bhaumik Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650302327-30439-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Sorting this way helps in identifying the products of vendors. There is no
sorting required for VID and the new VID should be added as the last entry.
Let's also add a note clarifying this.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220411133428.42165-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
mhi_recycle_ev_ring() computes the shared write pointer for the ring
(ctxt_wp) using a read/modify/write pattern where the ctxt_wp value in the
shared memory is read, incremented, and written back. There are no checks
on the read value, it is assumed that it is kept in sync with the locally
cached value. Per the MHI spec, this is correct. The device should only
read ctxt_wp, never write it.
However, there are devices in the wild that violate the spec, and can
update the ctxt_wp in a specific scenario. This can cause corruption, and
violate the above assumption that the ctxt_wp is in sync with the cached
value.
This can occur when the device has loaded firmware from the host, and is
transitioning from the SBL EE to the AMSS EE. As part of shutting down
SBL, the SBL flushes it's local MHI context to the shared memory since
the local context will not persist across an EE change. In the case of
the event ring, SBL will flush its entire context, not just the parts that
it is allowed to update. This means SBL will write to ctxt_wp, and
possibly corrupt it.
An example:
Host Device
---- ---
Update ctxt_wp to 0x1f0
SBL observes 0x1f0
Update ctxt_wp to 0x0
Starts transition to AMSS EE
Context flush, writes 0x1f0 to ctxt_wp
Update ctxt_wp to 0x200
Update ctxt_wp to 0x210
AMSS observes 0x210
0x210 exceeds ring size
AMSS signals syserr
The reason the ctxt_wp goes off the end of the ring is that the rollover
check is only performed on the cached wp, which is out of sync with
ctxt_wp.
Since the host is the authority of the value of ctxt_wp per the MHI spec,
we can fix this issue by not reading ctxt_wp from the shared memory, and
instead compute it based on the cached value. If SBL corrupts ctxt_wp,
the host won't observe it, and will correct the value at some point later.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com>
Reviewed-by: Bhaumik Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1649868113-18826-1-git-send-email-quic_jhugo@quicinc.com
[mani: used the quicinc domain for Hemant and Bhaumik]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use a helper to set driver_override to reduce the amount of duplicated
code. Make the driver_override field const char, because it is not
modified by the core and it matches other subsystems.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Few regression fixes for omap variants. These mostly fix issues related to
warnings added for system suspend, and some devicetree issues:
- Make ti-sysc driver quirks for gpt12 timer omap3 specific to fix
timer clock disabling for am335x system suspend
- Fix new system suspend warning for dra7 vpe caused by trying to
use register bits not wired for vpe
- Fix mmc boot order for omap3-gta04 that has no mmc2 or 3 wired
- Add missing touchscreen properties for am3
- Fix pin muxing for logicpd-som-lv and am3517-evm to not depend on
earlier bootloader versions
- Fix refcount leak for omap_gic_of_init
-----BEGIN PGP SIGNATURE-----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=ENHQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=qg1e
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.18/fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
Few regression fixes for omap variants. These mostly fix issues related to
warnings added for system suspend, and some devicetree issues:
- Make ti-sysc driver quirks for gpt12 timer omap3 specific to fix
timer clock disabling for am335x system suspend
- Fix new system suspend warning for dra7 vpe caused by trying to
use register bits not wired for vpe
- Fix mmc boot order for omap3-gta04 that has no mmc2 or 3 wired
- Add missing touchscreen properties for am3
- Fix pin muxing for logicpd-som-lv and am3517-evm to not depend on
earlier bootloader versions
- Fix refcount leak for omap_gic_of_init
* tag 'omap-for-v5.18/fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
ARM: dts: am3517-evm: Fix misc pinmuxing
ARM: dts: am33xx-l4: Add missing touchscreen clock properties
ARM: dts: Fix mmc order for omap3-gta04
ARM: dts: dra7: Fix suspend warning for vpe powerdomain
bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific
ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
iommu/omap: Fix regression in probe for NULL pointer dereference
Link: https://lore.kernel.org/r/pull-1650543308-836725@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-Id: <602f74030dc746eaa9f82f115acc46e62c6be165.1646311501.git.geert+renesas@glider.be>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add bindings for the AHB bus which exposes the SSC (Snapdragon Sensor Core)
block in the global address space. This bus (and the SSC block itself) is
present on certain qcom SoCs.
In typical configuration, this bus (as some of the clocks and registers
that we need to manipulate) is not accessible to Linux, and the resources
on this bus are indirectly accessed by communicating with a hexagon CPU
core residing in the SSC block. In this configuration, the hypervisor is
the one performing the bus initialization for the purposes of bringing
the hexagon CPU core out of reset.
However, it is possible to change the configuration, in which case this
driver will initialize the bus.
In combination with drivers for resources on the SSC bus, this driver can
aid in debugging, and for example with a TLMM driver can be used to
directly access SSC-dedicated GPIO pins, removing the need to commit
to a particular usecase during hw design.
Finally, until open firmware for the hexagon core is available, this
approach allows for using sensors hooked up to SSC-dedicated GPIO pins
on mainline Linux simply by utilizing the existing in-tree drivers for
these sensors.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411072156.24451-5-michael.srba@seznam.cz
It is possible that the recovery work might be running while the freeze
gets executed (during hibernation etc.,). Currently, we don't powerdown
the stack if it is not up but if the recovery work completes after freeze,
then the device will be up afterwards. This will not be a sane situation.
So let's flush the recovery worker before trying to powerdown the device.
Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Link: https://lore.kernel.org/r/20220408150039.17297-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
During hibernation process, once thaw() stage completes, the MHI endpoint
devices will be in M0 state post recovery. After that, the devices will be
powered down so that the system can enter the target sleep state. During
this stage, the PCI core will put the devices in D3hot. But this transition
is allowed by the MHI spec. The devices can only enter D3hot when it is in
M3 state.
So for fixing this issue, let's add the poweroff() callback that will get
executed before putting the system in target sleep state during
hibernation. This callback will power down the device properly so that it
could be restored during restore() or thaw() stage.
Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
Suggested-by: Hemant Kumar <quic_hemantk@quicinc.com>
Link: https://lore.kernel.org/r/20220405125907.5644-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
On beagleboard revisions A to B4 we need to use gpt12 as the system timer.
However, the quirk handling added for gpt12 caused a regression for system
suspend for am335x as the PM coprocessor needs the timers idled for
suspend.
Let's make the gpt12 quirk specific to omap34xx, other SoCs don't need
it. Beagleboard revisions C and later no longer need to use the gpt12
related quirk. Then at some point, if we decide to drop support for the old
beagleboard revisions A to B4, we can also drop the gpt12 related quirks
completely.
Fixes: 3ff340e24c ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status")
Reported-by: Kevin Hilman <khilman@baylibre.com>
Suggested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The sparse tool complains as follows:
drivers/bus/imx-weim.c:373:23: warning:
symbol 'weim_of_notifier' was not declared. Should it be static?
This symbol is not used outside of imx-weim.c, so marks it static.
Fixes: e6cb540828 ("bus: imx-weim: add DT overlay support for WEIM bus")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix following coccicheck warning:
./drivers/bus/imx-weim.c:355:18-21: ERROR: pdev is NULL but dereferenced.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add uevent support to MHI endpoint bus so that the client drivers can be
autoloaded by udev when the MHI endpoint devices gets created. The client
drivers are expected to provide MODULE_DEVICE_TABLE with the MHI id_table
struct so that the alias can be exported.
The MHI endpoint reused the mhi_device_id structure of the MHI bus.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for suspending and resuming the channels in MHI endpoint stack.
The channels will be moved to the suspended state during M3 state
transition and will be resumed during M0 transition.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for queueing SKBs to the host over the transfer ring of the
relevant channel. The mhi_ep_queue_skb() API will be used by the client
networking drivers to queue the SKBs to the host over MHI bus.
The host will add ring elements to the transfer ring periodically for
the device and the device will write SKBs to the ring elements. If a
single SKB doesn't fit in a ring element (TRE), it will be placed in
multiple ring elements and the overflow event will be sent for all ring
elements except the last one. For the last ring element, the EOT event
will be sent indicating the packet boundary.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for processing the channel rings from host. For the channel
ring associated with DL channel, the xfer callback will simply invoked.
For the case of UL channel, the ring elements will be read in a buffer
till the write pointer and later passed to the client driver using the
xfer callback.
The client drivers should provide the callbacks for both UL and DL
channels during registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Data transfer between host and the ep device happens over the transfer
ring associated with each bi-directional channel pair. Host defines the
transfer ring by allocating memory for it. The read and write pointer
addresses of the transfer ring are stored in the channel context.
Once host places the elements in the transfer ring, it increments the
write pointer and rings the channel doorbell. Device will receive the
doorbell interrupt and will process the transfer ring elements.
This commit adds support for reading the transfer ring elements from
the transfer ring till write pointer, incrementing the read pointer and
finally sending the completion event to the host through corresponding
event ring.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for processing the command rings. Command ring is used by the
host to issue channel specific commands to the ep device. Following
commands are supported:
1. Start channel
2. Stop channel
3. Reset channel
Once the device receives the command doorbell interrupt from host, it
executes the command and generates a command completion event to the
host in the primary event ring.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for handling SYS_ERR (System Error) condition in the MHI
endpoint stack. The SYS_ERR flag will be asserted by the endpoint device
when it detects an internal error. The host will then issue reset and
reinitializes MHI to recover from the error state.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for handling MHI_RESET in MHI endpoint stack. MHI_RESET will
be issued by the host during shutdown and during error scenario so that
it can recover the endpoint device without restarting the whole device.
MHI_RESET handling involves resetting the internal MHI registers, data
structures, state machines, resetting all channels/rings and setting
MHICTRL.RESET bit to 0. Additionally the device will also move to READY
state if the reset was due to SYS_ERR.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for MHI endpoint power_down that includes stopping all
available channels, destroying the channels, resetting the event and
transfer rings and freeing the host cache.
The stack will be powered down whenever the physical bus link goes down.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for MHI endpoint power_up that includes initializing the MMIO
and rings, caching the host MHI registers, and setting the MHI state to M0.
After registering the MHI EP controller, the stack has to be powered up
for usage.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for processing MHI endpoint interrupts such as control
interrupt, command interrupt and channel interrupt from the host.
The interrupts will be generated in the endpoint device whenever host
writes to the corresponding doorbell registers. The doorbell logic
is handled inside the hardware internally.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for managing the MHI state machine by controlling the state
transitions. Only the following MHI state transitions are supported:
1. Ready state
2. M0 state
3. M3 state
4. SYS_ERR state
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for sending the events to the host over MHI bus from the
endpoint. Following events are supported:
1. Transfer completion event
2. Command completion event
3. State change event
4. Execution Environment (EE) change event
An event is sent whenever an operation has been completed in the MHI EP
device. Event is sent using the MHI event ring and additionally the host
is notified using an IRQ if required.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for managing the MHI ring. The MHI ring is a circular queue
of data structures used to pass the information between host and the
endpoint.
MHI support 3 types of rings:
1. Transfer ring
2. Event ring
3. Command ring
All rings reside inside the host memory and the MHI EP device maps it to
the device memory using blocks like PCIe iATU. The mapping is handled in
the MHI EP controller driver itself.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for managing the Memory Mapped Input Output (MMIO) registers
of the MHI bus. All MHI operations are carried out using the MMIO registers
by both host and the endpoint device.
The MMIO registers reside inside the endpoint device memory (fixed
location based on the platform) and the address is passed by the MHI EP
controller driver during its registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit adds support for creating and destroying MHI endpoint devices.
The MHI endpoint devices binds to the MHI endpoint channels and are used
to transfer data between MHI host and endpoint device.
There is a single MHI EP device for each channel pair. The devices will be
created when the corresponding channels has been started by the host and
will be destroyed during MHI EP power down and reset.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit adds support for registering MHI endpoint client drivers
with the MHI endpoint stack. MHI endpoint client drivers bind to one
or more MHI endpoint devices inorder to send and receive the upper-layer
protocol packets like IP packets, modem control messages, and
diagnostics messages over MHI bus.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit adds support for registering MHI endpoint controller drivers
with the MHI endpoint stack. MHI endpoint controller drivers manage
the interaction with the host machines (such as x86). They are also the
MHI endpoint bus master in charge of managing the physical link between
the host and endpoint device. Eventhough the MHI spec is bus agnostic,
the current implementation is entirely based on PCIe bus.
The endpoint controller driver encloses all information about the
underlying physical bus like PCIe. The registration process involves
parsing the channel configuration and allocating an MHI EP device.
Channels used in the endpoint stack follows the perspective of the MHI
host stack. i.e.,
UL - From host to endpoint
DL - From endpoint to host
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
There are a few separately maintained driver subsystems that we merge through
the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs,
and clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport based
on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ
and older NVIDIA Tegra chips
-----BEGIN PGP SIGNATURE-----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=Cfbk
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
mhi_state_str[] array could be used by MHI endpoint stack also. So let's
make the array as "static inline function" and move it inside the
"common.h" header so that the endpoint stack could also make use of it.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the common MHI definitions in host "internal.h" to "common.h" so
that the endpoint code can make use of them. This also avoids
duplicating the definitions in the endpoint stack.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Structure "struct mhi_tre" is representing a generic MHI ring element and
not specifically a Transfer Ring Element (TRE). Fix the naming.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup includes:
1. Using the GENMASK macro for masks
2. Removing brackets for single values
3. Using lowercase for hex values
4. Using two digits for hex values where applicable
5. Aligning the defines on same column
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the hardcoded bits in DWORD definitions, let's use the
bitfield operations to make it more clear how the DWORDs are structured.
Suggested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions like mhi_read_reg_field(), mhi_poll_reg_field() and
mhi_write_reg_field() could be modified to not depend on the shift value
passed as an argument. Instead, the bitfield operation could be used to
extract the shift value from the mask itself.
This eliminates the need to define _SHIFT (and _SHFT) macros and
simplifies the code a bit. For shift values those cannot be determined
during build time, "__ffs()" helper is used find the shift value during
runtime.
While at it, let's also get rid of 32-bit masks like CHDBOFF_CHDBOFF_MASK
by doing the full 32-bit register read.
Suggested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation of the endpoint MHI support, let's move the host MHI code
to its own "host" directory and adjust the toplevel MHI Kconfig & Makefile.
While at it, let's also move the "pci_generic" driver to "host" directory
as it is a host MHI controller driver.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MHI driver does not work on big endian architectures. The
controller never transitions into mission mode. This appears to be due
to the modem device expecting the various contexts and transfer rings to
have fields in little endian order in memory, but the driver constructs
them in native endianness.
Fix MHI event, channel and command contexts and TRE handling macros to
use explicit conversion to little endian. Mark fields in relevant
structures as little endian to document this requirement.
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Fixes: 6cd330ae76 ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On big endian architectures the mhi debugfs files which report pm state
give "Invalid State" for all states. This is caused by using
find_last_bit which takes an unsigned long* while the state is passed in
as an enum mhi_pm_state which will be of int size.
Fix by using __fls to pass the value of state instead of find_last_bit.
Also the current API expects "mhi_pm_state" enumerator as the function
argument but the function only works with bitmasks. So as Alex suggested,
let's change the argument to u32 to avoid confusion.
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Cc: stable@vger.kernel.org
[mani: changed the function argument to u32]
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: 2121aa3e23 ("mips: cdmm: Add mti,mips-cdmm dtb node support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add OF reconfiguration notifier handler for WEIM bus to setup Chip
Select timings on runtime creation of child devices.
However, it is not possible to load another DT overlay with conflicting
CS timings with previously loaded overlay, even if the first one is
unloaded. The reason is that there is no acces to CS timing property of
a device node being removed, thus we can't track which of configured CS
are available for re-configuration.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Cinterion MV31-W, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Link: https://lore.kernel.org/r/20220119102519.5342-1-slark_xiao@163.com
[mani: Modified the commit message to reflect Cinterion MV31-W and CCed stable]
Fixes: 87693e092b ("bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI")
Cc: stable@vger.kernel.org # v5.14 +
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Foxconn SDX55, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Link: https://lore.kernel.org/r/20220119101213.5008-1-slark_xiao@163.com
[mani: Added pci_generic prefix to subject and CCed stable]
Fixes: aac426562f ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Cc: stable@vger.kernel.org # v5.12+
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmHgpugUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vz59g//eWRLb0j2Vgv84ZH4x1iv6MaBboQr
2wScnfoN+MIoh+tuM4kRak15X4nB8rJhNZZCzesMUN6PeZvrkoPo4sz/xdzIrA/N
qY3h8NZ3nC4yCvs/tGem0zZUcSCJsxUAD0eegyMSa142xGIOQTHBSJRflR9osKSo
bnQlKTkugV8t4kD7NlQ5M3HzN3R+mjsII5JNzCqv2XlzAZG3D8DhPyIpZnRNAOmW
KiHOVXvQOocfUlvSs5kBlhgR1HgJkGnruCrJ1iDCWQH1Zk0iuVgoZWgVda6Cs3Xv
gcTJLB7VoSdNZKnct9aMNYPKziHkYc7clilPeDsJs5TlSv3kKERzLj6c/5ZAxFWN
+RsH+zYHDXJSsL/w0twPnaF5WCuVYUyrs3UiSjUvShKl1T9k9J+Jo8zwUUZx8Xb0
qXX8jRGMHolBGwPXm2fHEb4bwTUI8emPj29qK4L96KsQ3zKXWB8eGSosxUP52Tti
RR2WZjkvwlREZCJp6jSEJYkhzoEaVAm8CjKpKUuneX9WcUOsMBSs9k7EXbUy7JeM
hq5Keuqa8PZo/IK2DYYAchNnBJUDMsWJeduBW12qSmx3J+9victP2qOFu+9skP0a
85xlO6Cx8beiQh+XnY7jyROvIFuxTnGKHgkq/89Ham/whEzdJ+GRIiYB218kLLCW
ILdas3C2iiGz99I=
=Vgg4
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use pci_find_vsec_capability() instead of open-coding it (Andy
Shevchenko)
- Convert pci_dev_present() stub from macro to static inline to avoid
'unused variable' errors (Hans de Goede)
- Convert sysfs slot attributes from default_attrs to default_groups
(Greg Kroah-Hartman)
- Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
(Rajat Jain)
- Remove unnecessary initialization of static variables (Longji Guo)
Resource management:
- Always write Intel I210 ROM BAR on update to work around device
defect (Bjorn Helgaas)
PCIe native device hotplug:
- Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
- Fix infinite loop in pciehp IRQ handler on power fault (Lukas
Wunner)
Power management:
- Convert amd64-agp, sis-agp, via-agp from legacy PCI power
management to generic power management (Vaibhav Gupta)
IOMMU:
- Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
so it can work with an IOMMU (Yifeng Li)
Error handling:
- Add PCI_ERROR_RESPONSE and related definitions for signaling and
checking for transaction errors on PCI (Naveen Naidu)
- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
instead of in host controller drivers, when transactions fail on
PCI (Naveen Naidu)
- Use PCI_POSSIBLE_ERROR() to check for possible failure of config
reads (Naveen Naidu)
Peer-to-peer DMA:
- Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)
ASPM:
- Calculate link L0s and L1 exit latencies when needed instead of
caching them (Saheed O. Bolarinwa)
- Calculate device L0s and L1 acceptable exit latencies when needed
instead of caching them (Saheed O. Bolarinwa)
- Remove struct aspm_latency since it's no longer needed (Saheed O.
Bolarinwa)
APM X-Gene PCIe controller driver:
- Fix IB window setup, which was broken by the fact that IB resources
are now sorted in address order instead of DT dma-ranges order (Rob
Herring)
Apple PCIe controller driver:
- Enable clock gating to save power (Hector Martin)
- Fix REFCLK1 enable/poll logic (Hector Martin)
Broadcom STB PCIe controller driver:
- Declare bitmap correctly for use by bitmap interfaces (Christophe
JAILLET)
- Clean up computation of legacy and non-legacy MSI bitmasks (Florian
Fainelli)
- Update suspend/resume/remove error handling to warn about errors
and not fail the operation (Jim Quinlan)
- Correct the "pcie" and "msi" interrupt descriptions in DT binding
(Jim Quinlan)
- Add DT bindings for endpoint voltage regulators (Jim Quinlan)
- Split brcm_pcie_setup() into two functions (Jim Quinlan)
- Add mechanism for turning on voltage regulators for connected
devices (Jim Quinlan)
- Turn voltage regulators for connected devices on/off when bus is
added or removed (Jim Quinlan)
- When suspending, don't turn off voltage regulators for wakeup
devices (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Use DWC common ops instead of layerscape-specific link-up functions
(Hou Zhiqiang)
Intel VMD host bridge driver:
- Honor platform ACPI _OSC feature negotiation for Root Ports below
VMD (Kai-Heng Feng)
- Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
- Reset everything below VMD before enumerating to work around
failure to enumerate NVMe devices when guest OS reboots (Nirmal
Patel)
Bridge emulation (used by Marvell Aardvark and MVEBU):
- Make emulated ROM BAR read-only by default (Pali Rohár)
- Make some emulated legacy PCI bits read-only for PCIe devices (Pali
Rohár)
- Update reserved bits in emulated PCIe Capability (Pali Rohár)
- Allow drivers to emulate different PCIe Capability versions (Pali
Rohár)
- Set emulated Capabilities List bit for all PCIe devices, since they
must have at least a PCIe Capability (Pali Rohár)
Marvell Aardvark PCIe controller driver:
- Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
Rohár)
- Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
registers (Pali Rohár)
- Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)
- Disable bus mastering when unbinding host controller driver (Pali
Rohár)
- Mask all interrupts when unbinding host controller driver (Pali
Rohár)
- Fix memory leak in host controller unbind (Pali Rohár)
- Assert PERST# when unbinding host controller driver (Pali Rohár)
- Disable link training when unbinding host controller driver (Pali
Rohár)
- Disable common PHY when unbinding host controller driver (Pali
Rohár)
- Fix resource type checking to check only IORESOURCE_MEM, not
IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Implement pci_remap_iospace() for ARM so mvebu can use
devm_pci_remap_iospace() instead of the previous ARM-specific
pci_ioremap_io() interface (Pali Rohár)
- Use the standard pci_host_probe() instead of the device-specific
mvebu_pci_host_probe() (Pali Rohár)
- Replace all uses of ARM-specific pci_ioremap_io() with the ARM
implementation of the standard pci_remap_iospace() interface and
remove pci_ioremap_io() (Pali Rohár)
- Skip initializing invalid Root Ports (Pali Rohár)
- Check for errors from pci_bridge_emul_init() (Pali Rohár)
- Ignore any bridges at non-zero function numbers (Pali Rohár)
- Return ~0 data for invalid config read size (Pali Rohár)
- Disallow mapping interrupts on emulated bridges (Pali Rohár)
- Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
initialization (Pali Rohár)
- Make type bits in Root Port I/O Base register read-only (Pali
Rohár)
- Disable Root Port windows when base/limit set to invalid values
(Pali Rohár)
- Set controller to Root Complex mode (Pali Rohár)
- Set Root Port Class Code to PCI Bridge (Pali Rohár)
- Update emulated Root Port secondary bus numbers to better reflect
the actual topology (Pali Rohár)
- Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
pci_reset_secondary_bus() can reset connected devices (Pali Rohár)
- Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
Ports (Pali Rohár)
- Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
(Pali Rohár)
- Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
Armada XP and newer devices (Pali Rohár)
- Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
(Pali Rohár)
- Add support for compiling as a module (Pali Rohár)
MediaTek PCIe controller driver:
- Assert PERST# for 100ms to allow power and clock to stabilize
(qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
respond to the request causes failure to exit L1 PM Substate
(Jianjun Wang)
MediaTek MT7621 PCIe controller driver:
- Declare mt7621_pci_ops static (Sergio Paracuellos)
- Give pcibios_root_bridge_prepare() access to host bridge windows
(Sergio Paracuellos)
- Move MIPS I/O coherency unit setup from driver to
pcibios_root_bridge_prepare() (Sergio Paracuellos)
- Add missing MODULE_LICENSE() (Sergio Paracuellos)
- Allow COMPILE_TEST for all arches (Sergio Paracuellos)
Microsoft Hyper-V host bridge driver:
- Add hv-internal interfaces to encapsulate arch IRQ dependencies
(Sunil Muthuswamy)
- Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)
Qualcomm PCIe controller driver:
- Undo PM setup in qcom_pcie_probe() error handling path (Christophe
JAILLET)
- Use __be16 type to store return value from cpu_to_be16()
(Manivannan Sadhasivam)
- Constify static dw_pcie_ep_ops (Rikard Falkeborn)
Renesas R-Car PCIe controller driver:
- Fix aarch32 abort handler so it doesn't check the wrong bus clock
before accessing the host controller (Marek Vasut)
TI Keystone PCIe controller driver:
- Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
DT properties (Kishon Vijay Abraham I)
MicroSemi Switchtec management driver:
- Add Gen4 automotive device IDs (Kelvin Cao)
- Declare state_names[] as static so it's not allocated and
initialized for every call (Kelvin Cao)
Host controller driver cleanups:
- Use of_device_get_match_data(), not of_match_device(), when we only
need the device data in altera, artpec6, cadence, designware-plat,
dra7xx, keystone, kirin (Fan Fei)
- Drop pointless of_device_get_match_data() cast in j721e (Bjorn
Helgaas)
- Drop redundant struct device * from j721e since struct cdns_pcie
already has one (Bjorn Helgaas)
- Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
- Fix invalid address space conversions in hisi, spear13xx (Bjorn
Helgaas)
Miscellaneous:
- Sort Intel Device IDs by value (Andy Shevchenko)
- Change Capability offsets to hex to match spec (Baruch Siach)
- Correct misspellings (Krzysztof Wilczyński)
- Terminate statement with semicolon in pci_endpoint_test.c (Ming
Wang)"
* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
PCI: mt7621: Allow COMPILE_TEST for all arches
PCI: mt7621: Add missing MODULE_LICENSE()
PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
PCI: Let pcibios_root_bridge_prepare() access bridge->windows
PCI: mt7621: Declare mt7621_pci_ops static
PCI: brcmstb: Do not turn off WOL regulators on suspend
PCI: brcmstb: Add control of subdevice voltage regulators
PCI: brcmstb: Add mechanism to turn on subdev regulators
PCI: brcmstb: Split brcm_pcie_setup() into two funcs
dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
PCI: brcmstb: Fix function return value handling
PCI: brcmstb: Do not use __GENMASK
PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
PCI: hv: Add arm64 Hyper-V vPCI support
PCI: hv: Make the code arch neutral by adding arch specific interfaces
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
x86/PCI: Remove initialization of static variables to false
PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
misc: pci_endpoint_test: Terminate statement with semicolon
...
Here is the large set of char, misc, and other "small" driver subsystem
changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the full
details.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z
hMr9mISG4r6g4PvjrJBj
=9May
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char, misc, and other "small" driver
subsystem changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the
full details.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
dt-bindings: mux: Document mux-states property
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
counter: remove old and now unused registration API
counter: ti-eqep: Convert to new counter registration
counter: stm32-lptimer-cnt: Convert to new counter registration
counter: stm32-timer-cnt: Convert to new counter registration
counter: microchip-tcb-capture: Convert to new counter registration
counter: ftm-quaddec: Convert to new counter registration
counter: intel-qep: Convert to new counter registration
counter: interrupt-cnt: Convert to new counter registration
counter: 104-quad-8: Convert to new counter registration
counter: Update documentation for new counter registration functions
counter: Provide alternative counter registration functions
counter: stm32-timer-cnt: Convert to counter_priv() wrapper
counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
counter: ti-eqep: Convert to counter_priv() wrapper
counter: ftm-quaddec: Convert to counter_priv() wrapper
counter: intel-qep: Convert to counter_priv() wrapper
counter: microchip-tcb-capture: Convert to counter_priv() wrapper
...
Treewide cleanup and consolidation of MSI interrupt handling in
preparation for further changes in this area which are necessary to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space
-----BEGIN PGP SIGNATURE-----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=vKzd
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU,
as well as a new USIv2 driver that handles various types of
serial communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple
drivers, as well as memory controller support for RZ/G2L
(R9A07G044).
- Apple M1 gains support for the PMGR power management driver
-----BEGIN PGP SIGNATURE-----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=tlZT
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
i.MX8MN display related domain support.
- Add optional continuous burst clock support for imx-weim bus driver.
- Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
MIX domain.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9dygUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7+jwgAle7/Po7Qs0JVrUwkJOWAjNxveXjv
keEC5o+svPOLIToX1lA+bY2CKlok2n6IIiEkpbgc+C+prTip0zJnJUFFHxuOeMkl
+/EWTthCAddLwXCdmU6c5HSw8XJ9rkH3YDvd46GkPnZuUiZVVmTYkuZQ25qCbPpE
f1kCg2RNVruZAOYHmMsoU+WMH3q40dvGSDVXbcHpNZ19qHooUyk/4jcXGlBJKXDo
iGosWLdqMy0vbK4cWFzorPFyTpaF1qq/o7AppfexT1h0f6aLnuKnBA5JXY4y4bvd
e+6EZ0VwvtdZBqMNaZLHqltCVA/Y0q2gXGryKUM6n7mGdv/LYictLHPudA==
=WKrF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=74GG
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.17:
- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
i.MX8MN display related domain support.
- Add optional continuous burst clock support for imx-weim bus driver.
- Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
MIX domain.
* tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
bus: imx-weim: optionally enable continuous burst clock
soc: imx: gpcv2: keep i.MX8MM VPU-H1 bus clock active
soc: imx: gpcv2: Synchronously suspend MIX domains
Link: https://lore.kernel.org/r/20211218071427.26745-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The find.h APIs are designed to be used only on unsigned long arguments.
This can technically result in a over-read, but it is harmless in this
case. Regardless, fix it to avoid the warning seen under -Warray-bounds,
which we'd like to enable globally:
In file included from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from ./include/linux/debugfs.h:15,
from drivers/bus/mhi/core/init.c:7:
drivers/bus/mhi/core/init.c: In function 'to_mhi_pm_state_str':
./include/linux/find.h:187:37: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'enum mhi_pm_state[1]' [-Warray-bounds]
187 | unsigned long val = *addr & GENMASK(size - 1, 0);
| ^~~~~
drivers/bus/mhi/core/init.c:80:51: note: while referencing 'state'
80 | const char *to_mhi_pm_state_str(enum mhi_pm_state state)
| ~~~~~~~~~~~~~~~~~~^~~~~
Link: https://lore.kernel.org/r/20211215232446.2069794-1-keescook@chromium.org
[mani: changed the variable name "bits" to "pm_state"]
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new API "mhi_prepare_for_transfer_autoqueue" for using with client
drivers like QRTR to request MHI core to autoqueue buffers for the DL
channel along with starting both UL and DL channels.
So far, the "auto_queue" flag specified by the controller drivers in
channel definition served this purpose but this will be removed at some
point in future.
Cc: netdev@vger.kernel.org
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During SYS_ERR condition, as a response to the MHI_RESET from host, some
devices tend to issue BHI interrupt without clearing the SYS_ERR state in
the device. This creates a race condition and causes a failure in booting
up the device.
The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR
handling in mhi_async_power_up(). Once the host detects that the device
is in SYS_ERR state, it issues MHI_RESET and waits for the device to
process the reset request. During this time, the device triggers the BHI
interrupt to the host without clearing SYS_ERR condition. So the host
starts handling the SYS_ERR condition again.
To fix this issue, let's register the IRQ handler only after handling the
SYS_ERR check to avoid getting spurious IRQs from the device.
Fixes: e18d4e9fa7 ("bus: mhi: core: Handle syserr during power_up")
Cc: stable@vger.kernel.org
Reported-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no reason for shutting down MHI ungracefully on freeze,
this causes the MHI host stack & device stack to not be aligned
anymore since the proper MHI reset sequence is not performed for
ungraceful shutdown.
Link: https://lore.kernel.org/r/1635268180-13699-1-git-send-email-loic.poulain@linaro.org
Fixes: 5f0c2ee1fe ("bus: mhi: pci-generic: Fix hibernation")
Cc: stable@vger.kernel.org
Suggested-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add new device ID 0xe0bf for T99W175.
This device ID is created because it is using Qualcomm SDX55 new base line.
Test evidence as below:
root@jbd-ThinkPad-P1-Gen-4:/dev# lspci -nn | grep Foxconn
0000:08:00.0 Wireless controller [0d40]: Foxconn International, Inc. Device [105b:e0bf]
root@jbd-ThinkPad-P1-Gen-4:/dev# cat wwan0at0 & echo -ne "ati\r" > wwan0at0
[2] 2977
root@jbd-ThinkPad-P1-Gen-4:/dev# ati
Manufacturer: Qualcomm
Model: T99W175
Revision: T99W175.F0.6.0.0.6.CC.005 1 [Oct 21 2021 10:00:00]
IMEI:
+GCAP: +CGSM
OK
Link: https://lore.kernel.org/r/20211029104918.3976-1-slark_xiao@163.com
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Storing a pointer to the MSI descriptor just to track the Linux interrupt
number is daft. Just store the interrupt number and be done with it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221815.207838579@linutronix.de
Use the common msi_index member and get rid of the pointless wrapper struct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221814.477386185@linutronix.de
Allocate the MSI device data on first invocation of the allocation function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221813.867985931@linutronix.de
The GMI bus on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now GMI must be resumed using
runtime PM API in order to initialize the GMI power state. Add runtime PM
and OPP support to the GMI driver.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For whatever reason, some devices like QCA6390, WCN6855 using ath11k
are not in M3 state during PM resume, but still functional. The
mhi_pm_resume should then not fail in those cases, and let the higher
level device specific stack continue resuming process.
Add an API mhi_pm_resume_force(), to force resuming irrespective of the
current MHI state. This fixes a regression with non functional ath11k WiFi
after suspend/resume cycle on some machines.
Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179
Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/
Fixes: 020d3b26c0 ("bus: mhi: Early MHI resume failure in non M3 state")
Cc: stable@vger.kernel.org #5.13
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[mani: Switched to API, added bug report, reported-by tags and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For Foxconn T99W175 device(sdx55 platform) in some host platform,
it would be unavailable once the host execute the err handler.
After checking, it's caused by the delay time too short to
get a successful reset.
Please see my test evidence as bewlow(BTW, I add some extra test logs
in function mhi_pci_reset_prepare and mhi_pci_reset_done):
When MHI_POST_RESET_DELAY_MS equals to 500ms:
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222477] mhi mhi0: Device MHI is not in valid state
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222628] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222631] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222632] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.839993] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.902063] mhi-pci-generic 0000:2d:00.0: reset failed
When MHI_POST_RESET_DELAY_MS equals to 1000ms or 1500ms:
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.067857] mhi mhi0: Device MHI is not in valid state
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068029] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068032] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068034] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607006] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607152] mhi mhi0: Requested to power ON
Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.302872] mhi mhi0: Failed to reset MHI due to syserr state
Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.303011] mhi-pci-generic 0000:2d:00.0: failed to power up MHI controller
When MHI_POST_RESET_DELAY_MS equals to 2000ms:
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180527] mhi mhi0: Failed to transition from PM state: Linkdown or Error Fatal Detect to: SYS ERROR Process
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180535] mhi mhi0: Device MHI is not in valid state
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180722] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180725] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180727] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230787] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230928] mhi mhi0: Requested to power ON
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.231173] mhi mhi0: Power on setup success
Nov 4 17:51:14 jbd-ThinkEdge kernel: [ 153.254747] mhi mhi0: Wait for device to enter SBL or Mission mode
I also tried big data like 3000, and it worked as well. 500ms may not be
enough for all support mhi device. We shall increase it to 2000ms
at least.
Link: https://lore.kernel.org/r/20211108113127.3938-1-slark_xiao@163.com
[mani: massaged commit message little bit, added Fixes tag and CCed stable]
Fixes: 8ccc3279fc ("mhi: pci_generic: Add support for reset")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211126104951.35685-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function sunxi_rsb_hw_exit() is sometimes called with pm runtime
disabled, so in such cases pm_runtime_resume() will fail with -EACCES.
Instead of doing whole dance of enabling pm runtime and thus clock just
to disable it again immediately, just check if disabling clock is
needed. That way calling pm_runtime_resume() is not needed at all.
Fixes: 4a0dbc12e6 ("bus: sunxi-rsb: Implement runtime power management")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211121083537.612473-1-jernej.skrabec@gmail.com
After making the brcmstb_gisb driver modular with 707a4cdf86 ("bus:
brcmstb_gisb: Allow building as module") Guenter reported that mips
allmodconfig failed to link because board_be_handler was referenced.
Thomas indicated that if we were to continue making the brcmstb_gisb
driver modular for MIPS we would need to introduce a function that
allows setting the board_be_handler and export that function towards
modules.
This is what is being done here: board_be_handler is made static and is
now settable with a mips_set_be_handler() function which is exported.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fixes: 707a4cdf86 ("bus: brcmstb_gisb: Allow building as module")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=AsTx
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
* tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio: (27 commits)
vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()
vfio/ccw: Pass vfio_ccw_private not mdev_device to various functions
vfio/ccw: Use functions for alloc/free of the vfio_ccw_private
vfio/ccw: Remove unneeded GFP_DMA
vfio: Use cdev_device_add() instead of device_create()
vfio: Use a refcount_t instead of a kref in the vfio_group
vfio: Don't leak a group reference if the group already exists
vfio: Do not open code the group list search in vfio_create_group()
vfio: Delete vfio_get/put_group from vfio_iommu_group_notifier()
vfio/pci: Add OpRegion 2.0+ Extended VBT support.
vfio/iommu_type1: remove IS_IOMMU_CAP_DOMAIN_IN_CONTAINER
vfio/iommu_type1: remove the "external" domain
vfio/iommu_type1: initialize pgsize_bitmap in ->open
vfio/spapr_tce: reject mediated devices
vfio: clean up the check for mediated device in vfio_iommu_type1
vfio: remove the unused mdev iommu hook
vfio: move the vfio_iommu_driver_ops interface out of <linux/vfio.h>
vfio: remove unused method from vfio_iommu_driver_ops
vfio: simplify iommu group allocation for mediated devices
vfio: remove the iommudata hack for noiommu groups
...
and improving logging.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYW0p4gAKCRDj7w1vZxhR
xQmwAPsFDSF9fDz1/75sF2FosGV2dPIOBCMUeNFbMesvBKlZMQD/WVAyu7jjiL7k
i3LThqHE8Jsefv0gqvu2nXaHfxuGmAo=
=yWZX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jasz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers
Some new drivers changes for the Allwinner SoCs, converting to a helper
and improving logging.
* tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sun50i-de2: Adjust printing error message
soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/ad0aa469-9e1b-4bb6-a116-92648ed774fa.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
5.16, please pull the following:
- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
devm_platform_ioremap_resource() helper
- Florian updates the Bus Interface Unit code to tune the 72116 and
72113 chips according to their existing counterparts. The GISB driver is
updated to be built as a non-removable module
-----BEGIN PGP SIGNATURE-----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=9x6r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Is9X
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoC drivers changes for
5.16, please pull the following:
- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
devm_platform_ioremap_resource() helper
- Florian updates the Bus Interface Unit code to tune the 72116 and
72113 chips according to their existing counterparts. The GISB driver is
updated to be built as a non-removable module
* tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Allow building as module
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72116
soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72113
soc: bcm63xx-power: Make use of the helper function devm_platform_ioremap_resource()
soc: bcm: bcm-pmb: Make use of the helper function devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/20211013174016.831348-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SRAM driver often returns -EPROBE_DEFER and thus this bus driver often
prints error message, even if it probes successfully later. This is
confusing for users and they often think that something is wrong.
Use dev_err_probe() helper for printing error message. It handles
-EPROBE_DEFER automatically.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211010071812.145178-1-jernej.skrabec@gmail.com
Fix drivers/bus/ti-sysc.c:2494:13: error: variable 'error' set but not
used introduced by commit 9d88136120 ("bus: ti-sysc: Add quirk handling
for reinit on context lost").
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
