This change allows inbound traffic through nested IPsec tunnels to
successfully match policies and templates, while retaining the secpath
stack trace as necessary for netfilter policies.
Specifically, this patch marks secpath entries that have already matched
against a relevant policy as having been verified, allowing it to be
treated as optional and skipped after a tunnel decapsulation (during
which the src/dst/proto/etc may have changed, and the correct policy
chain no long be resolvable).
This approach is taken as opposed to the iteration in b0355dbbf1,
where the secpath was cleared, since that breaks subsequent validations
that rely on the existence of the secpath entries (netfilter policies, or
transport-in-tunnel mode, where policies remain resolvable).
Fixes: b0355dbbf1 ("Fix XFRM-I support for nested ESP tunnels")
Test: Tested against Android Kernel Unit Tests
Test: Tested against Android CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
During XFRM acquire flow, a default SA is created to be updated later,
once acquire netlink message is handled in user space. When the relevant
policy is offloaded this default SA is also offloaded to IPsec offload
supporting driver, however this SA does not have context suitable for
offloading in HW, nor is interesting to offload to HW, consequently needs
a special driver handling apart from other offloaded SA(s).
Add a special flag that marks such SA so driver can handle it correctly.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/f5da0834d8c6b82ab9ba38bd4a0c55e71f0e3dab.1678714336.git.leon@kernel.org
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fzwv
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-12-11
We've added 74 non-merge commits during the last 11 day(s) which contain
a total of 88 files changed, 3362 insertions(+), 789 deletions(-).
The main changes are:
1) Decouple prune and jump points handling in the verifier, from Andrii.
2) Do not rely on ALLOW_ERROR_INJECTION for fmod_ret, from Benjamin.
Merged from hid tree.
3) Do not zero-extend kfunc return values. Necessary fix for 32-bit archs,
from Björn.
4) Don't use rcu_users to refcount in task kfuncs, from David.
5) Three reg_state->id fixes in the verifier, from Eduard.
6) Optimize bpf_mem_alloc by reusing elements from free_by_rcu, from Hou.
7) Refactor dynptr handling in the verifier, from Kumar.
8) Remove the "/sys" mount and umount dance in {open,close}_netns
in bpf selftests, from Martin.
9) Enable sleepable support for cgrp local storage, from Yonghong.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (74 commits)
selftests/bpf: test case for relaxed prunning of active_lock.id
selftests/bpf: Add pruning test case for bpf_spin_lock
bpf: use check_ids() for active_lock comparison
selftests/bpf: verify states_equal() maintains idmap across all frames
bpf: states_equal() must build idmap for all function frames
selftests/bpf: test cases for regsafe() bug skipping check_id()
bpf: regsafe() must not skip check_ids()
docs/bpf: Add documentation for BPF_MAP_TYPE_SK_STORAGE
selftests/bpf: Add test for dynptr reinit in user_ringbuf callback
bpf: Use memmove for bpf_dynptr_{read,write}
bpf: Move PTR_TO_STACK alignment check to process_dynptr_func
bpf: Rework check_func_arg_reg_off
bpf: Rework process_dynptr_func
bpf: Propagate errors from process_* checks in check_func_arg
bpf: Refactor ARG_PTR_TO_DYNPTR checks into process_dynptr_func
bpf: Skip rcu_barrier() if rcu_trace_implies_rcu_gp() is true
bpf: Reuse freed element in free_by_rcu during allocation
selftests/bpf: Bring test_offload.py back to life
bpf: Fix comment error in fixup_kfunc_call function
bpf: Do not zero-extend kfunc return values
...
====================
Link: https://lore.kernel.org/r/20221212024701.73809-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change adds xfrm metadata helpers using the unstable kfunc call
interface for the TC-BPF hooks. This allows steering traffic towards
different IPsec connections based on logic implemented in bpf programs.
This object is built based on the availability of BTF debug info.
When setting the xfrm metadata, percpu metadata dsts are used in order
to avoid allocating a metadata dst per packet.
In order to guarantee safe module unload, the percpu dsts are allocated
on first use and never freed. The percpu pointer is stored in
net/core/filter.c so that it can be reused on module reload.
The metadata percpu dsts take ownership of the original skb dsts so
that they may be used as part of the xfrm transmission logic - e.g.
for MTU calculations.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20221203084659.1837829-3-eyal.birger@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Both in RX and TX, the traffic that performs IPsec packet offload
transformation is accounted by HW. It is needed to properly handle
hard limits that require to drop the packet.
It means that XFRM core needs to update internal counters with the one
that accounted by the HW, so new callbacks are introduced in this patch.
In case of soft or hard limit is occurred, the driver should call to
xfrm_state_check_expire() that will perform key rekeying exactly as
done by XFRM core.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Traffic received by device with enabled IPsec packet offload should
be forwarded to the stack only after decryption, packet headers and
trailers removed.
Such packets are expected to be seen as normal (non-XFRM) ones, while
not-supported packets should be dropped by the HW.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Extend netlink interface to add and delete XFRM policy from the device.
This functionality is a first step to implement packet IPsec offload solution.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In the next patches, the xfrm core code will be extended to support
new type of offload - packet offload. In that mode, both policy and state
should be specially configured in order to perform whole offloaded data
path.
Full offload takes care of encryption, decryption, encapsulation and
other operations with headers.
As this mode is new for XFRM policy flow, we can "start fresh" with flag
bits and release first and second bit for future use.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This commit adds support for 'collect_md' mode on xfrm interfaces.
Each net can have one collect_md device, created by providing the
IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be
altered and has no if_id or link device attributes.
On transmit to this device, the if_id is fetched from the attached dst
metadata on the skb. If exists, the link property is also fetched from
the metadata. The dst metadata type used is METADATA_XFRM which holds
these properties.
On the receive side, xfrmi_rcv_cb() populates a dst metadata for each
packet received and attaches it to the skb. The if_id used in this case is
fetched from the xfrm state, and the link is fetched from the incoming
device. This information can later be used by upper layers such as tc,
ebpf, and ip rules.
Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst
metadata is postponed until after scrubing. Similarly, xfrm_input() is
adapted to avoid dropping metadata dsts by only dropping 'valid'
(skb_valid_dst(skb) == true) dsts.
Policy matching on packets arriving from collect_md xfrmi devices is
done by using the xfrm state existing in the skb's sec_path.
The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session()
is changed to keep the details of the if_id extraction tucked away
in xfrm_interface.c.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-07-20
1) Don't set DST_NOPOLICY in IPv4, a recent patch made this
superfluous. From Eyal Birger.
2) Convert alg_key to flexible array member to avoid an iproute2
compile warning when built with gcc-12.
From Stephen Hemminger.
3) xfrm_register_km and xfrm_unregister_km do always return 0
so change the type to void. From Zhengchao Shao.
4) Fix spelling mistake in esp6.c
From Zhang Jiaming.
5) Improve the wording of comment above XFRM_OFFLOAD flags.
From Petr Vaněk.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If we set XFRM security policy by calling setsockopt with option
IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock'
struct. However tcp_v6_send_response doesn't look up dst_entry with the
actual socket but looks up with tcp control socket. This may cause a
problem that a RST packet is sent without ESP encryption & peer's TCP
socket can't receive it.
This patch will make the function look up dest_entry with actual socket,
if the socket has XFRM policy(sock_policy), so that the TCP response
packet via this function can be encrypted, & aligned on the encrypted
TCP socket.
Tested: We encountered this problem when a TCP socket which is encrypted
in ESP transport mode encryption, receives challenge ACK at SYN_SENT
state. After receiving challenge ACK, TCP needs to send RST to
establish the socket at next SYN try. But the RST was not encrypted &
peer TCP socket still remains on ESTABLISHED state.
So we verified this with test step as below.
[Test step]
1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED).
2. Client tries a new connection on the same TCP ports(src & dst).
3. Server will return challenge ACK instead of SYN,ACK.
4. Client will send RST to server to clear the SOCKET.
5. Client will retransmit SYN to server on the same TCP ports.
[Expected result]
The TCP connection should be established.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Sehee Lee <seheele@google.com>
Signed-off-by: Sewook Seo <sewookseo@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Functions xfrm_register_km and xfrm_unregister_km do always return 0,
change the type of functions to void.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
Rename:
dev_hold_track() -> netdev_hold()
dev_put_track() -> netdev_put()
dev_replace_track() -> netdev_ref_replace()
Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In IPv4 setting the "disable_policy" flag on a device means no policy
should be enforced for traffic originating from the device. This was
implemented by seting the DST_NOPOLICY flag in the dst based on the
originating device.
However, dsts are cached in nexthops regardless of the originating
devices, in which case, the DST_NOPOLICY flag value may be incorrect.
Consider the following setup:
+------------------------------+
| ROUTER |
+-------------+ | +-----------------+ |
| ipsec src |----|-|ipsec0 | |
+-------------+ | |disable_policy=0 | +----+ |
| +-----------------+ |eth1|-|-----
+-------------+ | +-----------------+ +----+ |
| noipsec src |----|-|eth0 | |
+-------------+ | |disable_policy=1 | |
| +-----------------+ |
+------------------------------+
Where ROUTER has a default route towards eth1.
dst entries for traffic arriving from eth0 would have DST_NOPOLICY
and would be cached and therefore can be reused by traffic originating
from ipsec0, skipping policy check.
Fix by setting a IPSKB_NOPOLICY flag in IPCB and observing it instead
of the DST in IN/FWD IPv4 policy checks.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After drivers were converted to rely on direction, the flags is not
used anymore and can be removed.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRM state doesn't need anything from flags except to understand
direction, so store it separately. For future patches, such change
will allow us to reuse xfrm_dev_offload for policy offload too, which
has three possible directions instead of two.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The struct xfrm_state_offload has all fields needed to hold information
for offloaded policies too. In order to do not create new struct with
same fields, let's rename existing one and reuse it later.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
num_exthdrs is set but never used, so delete it.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After removal of Innova IPsec support from mlx5 driver, the last user
of this XFRM_ESP_NO_TRAILER was gone too. This means that we can safely
remove it as no other hardware is capable (or need) to remove ESP trailer.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-03-19
1) Delete duplicated functions that calls same xfrm_api_check.
From Leon Romanovsky.
2) Align userland API of the default policy structure to the
internal structures. From Nicolas Dichtel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a follow up of commit f8d858e607 ("xfrm: make user policy API
complete"). The goal is to align userland API to the internal structures.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This reverts commit b515d26372.
Commit b515d26372 ("xfrm: xfrm_state_mtu
should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS
calculation in ipsec transport mode, resulting complete stalls of TCP
connections. This happens when the (P)MTU is 1280 or slighly larger.
The desired formula for the MSS is:
MSS = (MTU - ESP_overhead) - IP header - TCP header
However, the above commit clamps the (MTU - ESP_overhead) to a
minimum of 1280, turning the formula into
MSS = max(MTU - ESP overhead, 1280) - IP header - TCP header
With the (P)MTU near 1280, the calculated MSS is too large and the
resulting TCP packets never make it to the destination because they
are over the actual PMTU.
The above commit also causes suboptimal double fragmentation in
xfrm tunnel mode, as described in
https://lore.kernel.org/netdev/20210429202529.codhwpc7w6kbudug@dwarf.suse.cz/
The original problem the above commit was trying to fix is now fixed
by commit 6596a02295 ("xfrm: fix MTU
regression").
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch enables distinguishing SAs and SPs based on if_id during
the xfrm_migrate flow. This ensures support for xfrm interfaces
throughout the SA/SP lifecycle.
When there are multiple existing SPs with the same direction,
the same xfrm_selector and different endpoint addresses,
xfrm_migrate might fail with ENODATA.
Specifically, the code path for performing xfrm_migrate is:
Stage 1: find policy to migrate with
xfrm_migrate_policy_find(sel, dir, type, net)
Stage 2: find and update state(s) with
xfrm_migrate_state_find(mp, net)
Stage 3: update endpoint address(es) of template(s) with
xfrm_policy_migrate(pol, m, num_migrate)
Currently "Stage 1" always returns the first xfrm_policy that
matches, and "Stage 3" looks for the xfrm_tmpl that matches the
old endpoint address. Thus if there are multiple xfrm_policy
with same selector, direction, type and net, "Stage 1" might
rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA
because it cannot find a xfrm_tmpl with the matching endpoint
address.
The fix is to allow userspace to pass an if_id and add if_id
to the matching rule in Stage 1 and Stage 2 since if_id is a
unique ID for xfrm_policy and xfrm_state. For compatibility,
if_id will only be checked if the attribute is set.
Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1668886
Signed-off-by: Yan Yan <evitayan@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-01-06
1) Fix some clang_analyzer warnings about never read variables.
From luo penghao.
2) Check for pols[0] only once in xfrm_expand_policies().
From Jean Sacren.
3) The SA curlft.use_time was updated only on SA cration time.
Update whenever the SA is used. From Antony Antony
4) Add support for SM3 secure hash.
From Xu Jia.
5) Add support for SM4 symmetric cipher algorithm.
From Xu Jia.
6) Add a rate limit for SA mapping change messages.
From Antony Antony.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel generates mapping change message, XFRM_MSG_MAPPING,
when a source port chage is detected on a input state with UDP
encapsulation set. Kernel generates a message for each IPsec packet
with new source port. For a high speed flow per packet mapping change
message can be excessive, and can overload the user space listener.
Introduce rate limiting for XFRM_MSG_MAPPING message to the user space.
The rate limiting is configurable via netlink, when adding a new SA or
updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds.
v1->v2 change:
update xfrm_sa_len()
v2->v3 changes:
use u32 insted unsigned long to reduce size of struct xfrm_state
fix xfrm_ompat size Reported-by: kernel test robot <lkp@intel.com>
accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present
Co-developed-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When there is no policy configured on the system, the default policy is
checked in xfrm_route_forward. However, it was done with the wrong
direction (XFRM_POLICY_FWD instead of XFRM_POLICY_OUT).
The default policy for XFRM_POLICY_FWD was checked just before, with a call
to xfrm[46]_policy_check().
CC: stable@vger.kernel.org
Fixes: 2d151d3907 ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
As the default we assume the traffic to pass, if we have no
matching IPsec policy. With this patch, we have a possibility to
change this default from allow to block. It can be configured
via netlink. Each direction (input/output/forward) can be
configured separately. With the default to block configuered,
we need allow policies for all packet flows we accept.
We do not use default policy lookup for the loopback device.
v1->v2
- fix compiling when XFRM is disabled
- Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Christian Langrock <christian.langrock@secunet.com>
Signed-off-by: Christian Langrock <christian.langrock@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-06-28
1) Remove an unneeded error assignment in esp4_gro_receive().
From Yang Li.
2) Add a new byseq state hashtable to find acquire states faster.
From Sabrina Dubroca.
3) Remove some unnecessary variables in pfkey_create().
From zuoqilin.
4) Remove the unused description from xfrm_type struct.
From Florian Westphal.
5) Fix a spelling mistake in the comment of xfrm_state_ok().
From gushengxian.
6) Replace hdr_off indirections by a small helper function.
From Florian Westphal.
7) Remove xfrm4_output_finish and xfrm6_output_finish declarations,
they are not used anymore.From Antony Antony.
8) Remove xfrm replay indirections.
From Florian Westphal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The inner_ipproto saves the inner IP protocol of the plain
text packet. This allows vendor's IPsec feature making offload
decision at skb's features_check and configuring hardware at
ndo_start_xmit.
For example, ConnectX6-DX IPsec device needs the plaintext's
IP protocol to support partial checksum offload on
VXLAN/GENEVE packet over IPsec transport mode tunnel.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This replaces the overflow indirection with the new xfrm_replay_overflow
helper. After this, the 'repl' pointer in xfrm_state is no longer
needed and can be removed as well.
xfrm_replay_overflow() is added in two incarnations, one is used
when the kernel is compiled with xfrm hardware offload support enabled,
the other when its disabled.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Adds new xfrm_replay_recheck() helper and calls it from
xfrm input path instead of the indirection.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Similar to other patches: add a new helper to avoid
an indirection.
v2: fix 'net/xfrm/xfrm_replay.c:519:13: warning: 'seq' may be used
uninitialized in this function' warning.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
replay protection is implemented using a callback structure and then
called via
x->repl->notify(), x->repl->recheck(), and so on.
all the differect functions are always built-in, so this could be direct
calls instead.
This first patch prepares for removal of the x->repl structure.
Add an enum with the three available replay modes to the xfrm_state
structure and then replace all x->repl->notify() calls by the new
xfrm_replay_notify() helper.
The helper checks the enum internally to adapt behaviour as needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
These function declarations are not needed any more.
The definitions were deleted.
Fixes: 2ab6096db2 ("xfrm: remove output_finish indirection from xfrm_state_afinfo")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After previous patches all remaining users set the function pointer to
the same function: xfrm6_find_1stfragopt.
So remove this function pointer and call ip6_find_1stfragopt directly.
Reduces size of xfrm_type to 64 bytes on 64bit platforms.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When creating new states with seq set in xfrm_usersa_info, we walk
through all the states already installed in that netns to find a
matching ACQUIRE state (__xfrm_find_acq_byseq, called from
xfrm_state_add). This causes severe slowdowns on systems with a large
number of states.
This patch introduces a hashtable using x->km.seq as key, so that the
corresponding state can be found in a reasonable time.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Jianwen reported that IPv6 Interoperability tests are failing in an
IPsec case where one of the links between the IPsec peers has an MTU
of 1280. The peer generates a packet larger than this MTU, the router
replies with a "Packet too big" message indicating an MTU of 1280.
When the peer tries to send another large packet, xfrm_state_mtu
returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail
with EINVAL.
We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when
IPv6 is used. After going through IPsec, the packet will then be
fragmented to obey the actual network's PMTU, just before leaving the
host.
Currently, TFC padding is capped to PMTU - overhead to avoid
fragementation: after padding and encapsulation, we still fit within
the PMTU. That behavior is preserved in this patch.
Fixes: 91657eafb6 ("xfrm: take net hdr len into account for esp payload size calculation")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
