In a previous commit, Ubuntu kernel code version is correctly set
by retrieving the information from /proc/version_signature.
commit<5b3d72987701d51bf31823b39db49d10970f5c2d>
(libbpf: Improve LINUX_VERSION_CODE detection)
The /proc/version_signature file doesn't present in at least the
older versions of Debian distributions (eg, Debian 9, 10). The Debian
kernel has a similar issue where the release information from uname()
syscall doesn't give the kernel code version that matches what the
kernel actually expects. Below is an example content from Debian 10.
release: 4.19.0-23-amd64
version: #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64
Debian reports incorrect kernel version in utsname::release returned
by uname() syscall, which in older kernels (Debian 9, 10) leads to
kprobe BPF programs failing to load due to the version check mismatch.
Fortunately, the correct kernel code version presents in the
utsname::version returned by uname() syscall in Debian kernels. This
change adds another get kernel version function to handle Debian in
addition to the previously added get kernel version function to handle
Ubuntu. Some minor refactoring work is also done to make the code more
readable.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Signed-off-by: Ho-Ren (Jack) Chuang <horenchuang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230203234842.2933903-1-hao.xiang@bytedance.com
Extend bpf_xdp_query routine in order to get XDP/XSK supported features
of netdev over route netlink interface.
Extend libbpf netlink implementation in order to support netlink_generic
protocol.
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a72609ef4f0de7fee5376c40dbf54ad7f13bfb8d.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_PROBE_READ_INTO() and BPF_PROBE_READ_STR_INTO() should map to
bpf_probe_read() and bpf_probe_read_str() respectively in order to work
correctly on architectures with !ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-24-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Loading programs that use bpf_usdt_arg() on s390x fails with:
; if (arg_num >= BPF_USDT_MAX_ARG_CNT || arg_num >= spec->arg_cnt)
128: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
129: (25) if r1 > 0xb goto pc+83 ; frame1: R1_w=scalar(umax=11,var_off=(0x0; 0xf))
...
; arg_spec = &spec->args[arg_num];
135: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
...
; switch (arg_spec->arg_type) {
139: (61) r1 = *(u32 *)(r2 +8)
R2 unbounded memory access, make sure to bounds check any such access
The reason is that, even though the C code enforces that
arg_num < BPF_USDT_MAX_ARG_CNT, the verifier cannot propagate this
constraint to the arg_spec assignment yet. Help it by forcing r1 back
to stack after comparison.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-23-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This fixes the doxygen format documentation above the
user_ring_buffer__* APIs. There has to be a newline
before the @brief, otherwise doxygen won't render them
for libbpf.readthedocs.org.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230126024749.522278-1-grantseltzer@gmail.com
In a prior change, the verifier was updated to support sleepable
BPF_PROG_TYPE_STRUCT_OPS programs. A caller could set the program as
sleepable with bpf_program__set_flags(), but it would be more ergonomic
and more in-line with other sleepable program types if we supported
suffixing a struct_ops section name with .s to indicate that it's
sleepable.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Each architecture supports at least 6 syscall argument registers, so now
that specs for each architecture is defined in bpf_tracing.h, remove
unnecessary macro overrides, which previously were required to keep
existing BPF_KSYSCALL() uses compiling and working.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-26-andrii@kernel.org
Define explicit table of registers used for syscall argument passing.
Note that 7th arg is supported on 32-bit powerpc architecture, by not on
powerpc64.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-20-andrii@kernel.org
Define explicit table of registers used for syscall argument passing.
We need PT_REGS_PARM1_[CORE_]SYSCALL macros overrides, similarly to
s390x, due to orig_x0 not being present in UAPI's pt_regs, so we need to
utilize BPF CO-RE and custom pt_regs___arm64 definition.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-18-andrii@kernel.org
Define explicit table of registers used for syscall argument passing.
Note that we need custom overrides for PT_REGS_PARM1_[CORE_]SYSCALL
macros due to the need to use BPF CO-RE and custom local pt_regs
definitions to fetch orig_gpr2, storing 1st argument.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-16-andrii@kernel.org
Define explicit table of registers used for syscall argument passing.
Remove now unnecessary overrides of PT_REGS_PARM5_[CORE_]SYSCALL macros.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-14-andrii@kernel.org
Set up generic support in bpf_tracing.h for up to 7 syscall arguments
tracing with BPF_KSYSCALL, which seems to be the limit according to
syscall(2) manpage. Also change the way that syscall convention is
specified to be more explicit. Subsequent patches will adjust and define
proper per-architecture syscall conventions.
__PT_PARM1_SYSCALL_REG through __PT_PARM6_SYSCALL_REG is added
temporarily to keep everything working before each architecture has
syscall reg tables defined. They will be removed afterwards.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-13-andrii@kernel.org
Add BPF_UPROBE and BPF_URETPROBE macros, aliased to BPF_KPROBE and
BPF_KRETPROBE, respectively. This makes uprobe-based BPF program code
much less confusing, especially to people new to tracing, at no cost in
terms of maintainability. We'll use this macro in selftests in
subsequent patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-11-andrii@kernel.org
Add PARM6 through PARM8 definitions. Also fix frame pointer (FP)
register definition. Also leave a link to where to find ABI spec.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-9-andrii@kernel.org
Add PARM6 through PARM8 definitions for RISC V (riscv) arch. Leave the
link for ABI doc for future reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Pu Lehui <pulehui@huawei.com> # RISC-V
Link: https://lore.kernel.org/bpf/20230120200914.3008030-8-andrii@kernel.org
Add definitions of PARM6 through PARM8 for powerpc architecture. Add
also a link to a functiona call sequence documentation for future reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-6-andrii@kernel.org
Add registers for PARM6 through PARM8. Add a link to an ABI. We don't
distinguish between O32, N32, and N64, so document that we assume N64
right now.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-5-andrii@kernel.org
Remove invalid support for PARM5 on 32-bit arm, as per ABI. Add three
more argument registers for arm64. Also leave links to ABI specs for
future reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-4-andrii@kernel.org
Add r9 as register containing 6th argument on x86-64 architecture, as
per its ABI. Add also a link to a page describing ABI for easier future
reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-3-andrii@kernel.org
Add BPF_KPROBE() and PT_REGS_PARMx() support for up to 8 arguments, if
target architecture supports this. Currently all architectures are
limited to only 5 register-placed arguments, which is limiting even on
x86-64.
This patch adds generic macro machinery to support up to 8 arguments
both when explicitly fetching it from pt_regs through PT_REGS_PARMx()
macros, as well as more ergonomic access in BPF_KPROBE().
Also, for i386 architecture we now don't have to define fake PARM4 and
PARM5 definitions, they will be generically substituted, just like for
PARM6 through PARM8.
Subsequent patches will fill out architecture-specific definitions,
where appropriate.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Link: https://lore.kernel.org/bpf/20230120200914.3008030-2-andrii@kernel.org
'.' is not allowed in the event name of kprobe. Therefore, we will get a
EINVAL if the kernel function name has a '.' in legacy kprobe attach
case, such as 'icmp_reply.constprop.0'.
In order to adapt this case, we need to replace the '.' with other char
in gen_kprobe_legacy_event_name(). And I use '_' for this propose.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20230113093427.1666466-1-imagedong@tencent.com
As BPF_F_MMAPABLE flag is now conditionnaly set (by map_is_mmapable),
it should not be toggled but disabled if not supported by kernel.
Fixes: 4fcac46c7e ("libbpf: only add BPF_F_MMAPABLE flag for data maps with global vars")
Signed-off-by: Ludovic L'Hours <ludovic.lhours@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230108182018.24433-1-ludovic.lhours@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Since commit 9fc205b413b3("libbpf: Add sane strncpy alternative and use
it internally") introduce libbpf_strlcpy(), thus add strlcpy() to a poison
list to prevent accidental use of it.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/tencent_5695A257C4D16B4413036BA1DAACDECB0B07@qq.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY7X/4wAKCRDbK58LschI
g7gzAQCjKsLtAWg1OplW+B7pvEPwkQ8g3O1+PYWlToCUACTlzQD+PEMrqGnxB573
oQAk6I2yOTwLgvlHkrm+TIdKSouI4gs=
=2hUY
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2023-01-04
We've added 45 non-merge commits during the last 21 day(s) which contain
a total of 50 files changed, 1454 insertions(+), 375 deletions(-).
The main changes are:
1) Fixes, improvements and refactoring of parts of BPF verifier's
state equivalence checks, from Andrii Nakryiko.
2) Fix a few corner cases in libbpf's BTF-to-C converter in particular
around padding handling and enums, also from Andrii Nakryiko.
3) Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better
support decap on GRE tunnel devices not operating in collect metadata,
from Christian Ehrig.
4) Improve x86 JIT's codegen for PROBE_MEM runtime error checks,
from Dave Marchevsky.
5) Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers, from Jiri Olsa.
6) Add proper documentation for BPF_MAP_TYPE_SOCK{MAP,HASH} maps,
from Maryam Tahhan.
7) Improvements in libbpf's btf_parse_elf error handling, from Changbin Du.
8) Bigger batch of improvements to BPF tracing code samples,
from Daniel T. Lee.
9) Add LoongArch support to libbpf's bpf_tracing helper header,
from Hengqi Chen.
10) Fix a libbpf compiler warning in perf_event_open_probe on arm32,
from Khem Raj.
11) Optimize bpf_local_storage_elem by removing 56 bytes of padding,
from Martin KaFai Lau.
12) Use pkg-config to locate libelf for resolve_btfids build,
from Shen Jiamin.
13) Various libbpf improvements around API documentation and errno
handling, from Xin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
libbpf: Return -ENODATA for missing btf section
libbpf: Add LoongArch support to bpf_tracing.h
libbpf: Restore errno after pr_warn.
libbpf: Added the description of some API functions
libbpf: Fix invalid return address register in s390
samples/bpf: Use BPF_KSYSCALL macro in syscall tracing programs
samples/bpf: Fix tracex2 by using BPF_KSYSCALL macro
samples/bpf: Change _kern suffix to .bpf with syscall tracing program
samples/bpf: Use vmlinux.h instead of implicit headers in syscall tracing program
samples/bpf: Use kyscall instead of kprobe in syscall tracing program
bpf: rename list_head -> graph_root in field info types
libbpf: fix errno is overwritten after being closed.
bpf: fix regs_exact() logic in regsafe() to remap IDs correctly
bpf: perform byte-by-byte comparison only when necessary in regsafe()
bpf: reject non-exact register type matches in regsafe()
bpf: generalize MAYBE_NULL vs non-MAYBE_NULL rule
bpf: reorganize struct bpf_reg_state fields
bpf: teach refsafe() to take into account ID remapping
bpf: Remove unused field initialization in bpf's ctl_table
selftests/bpf: Add jit probe_mem corner case tests to s390x denylist
...
====================
Link: https://lore.kernel.org/r/20230105000926.31350-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As discussed before, return -ENODATA (No data available) would be more
meaningful than ENOENT (No such file or directory).
Suggested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221231151436.6541-1-changbin.du@gmail.com
pr_warn calls into user-provided callback, which can clobber errno, so
`errno = saved_errno` should happen after pr_warn.
Fixes: 0745324562 ("libbpf: fix errno is overwritten after being closed.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, many API functions are not described in the document.
Add add API description of the following four API functions:
- libbpf_set_print;
- bpf_object__open;
- bpf_object__load;
- bpf_object__close.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224112058.12038-1-liuxin350@huawei.com
There is currently an invalid register mapping in the s390 return
address register. As the manual[1] states, the return address can be
found at r14. In bpf_tracing.h, the s390 registers were named
gprs(general purpose registers). This commit fixes the problem by
correcting the mistyped mapping.
[1]: https://uclibc.org/docs/psABI-s390x.pdf#page=14
Fixes: 3cc31d7940 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224071527.2292-7-danieltimlee@gmail.com
In the ensure_good_fd function, if the fcntl function succeeds but
the close function fails, ensure_good_fd returns a normal fd and
sets errno, which may cause users to misunderstand. The close
failure is not a serious problem, and the correct FD has been
handed over to the upper-layer application. Let's restore errno here.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Link: https://lore.kernel.org/r/20221223133618.10323-1-liuxin350@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Bump current version for new development cycle to v1.2.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221221180049.853365-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Show the real problem instead of just saying "No such file or directory".
Now will print below info:
libbpf: failed to find '.BTF' ELF section in /home/changbin/work/linux/vmlinux
Error: failed to load BTF from /home/changbin/work/linux/vmlinux: No such file or directory
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221217223509.88254-2-changbin.du@gmail.com
Clang warns on 32-bit ARM on this comparision:
libbpf.c:10497:18: error: result of comparison of constant 4294967296 with expression of type 'size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (ref_ctr_off >= (1ULL << PERF_UPROBE_REF_CTR_OFFSET_BITS))
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Typecast ref_ctr_off to __u64 in the check conditional, it is false on
32bit anyways.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221219191526.296264-1-raj.khem@gmail.com
To resolve a trivial merge conflict with c302378bc1 ("libbpf:
Hashmap interface update to allow both long and void* keys/values"),
where a function present upstream was removed in the perf tools
development tree.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix bug in btf_dump's logic of determining if a given struct type is
packed or not. The notion of "natural alignment" is not needed and is
even harmful in this case, so drop it altogether. The biggest difference
in btf_is_struct_packed() compared to its original implementation is
that we don't really use btf__align_of() to determine overall alignment
of a struct type (because it could be 1 for both packed and non-packed
struct, depending on specifci field definitions), and just use field's
actual alignment to calculate whether any field is requiring packing or
struct's size overall necessitates packing.
Add two simple test cases that demonstrate the difference this change
would make.
Fixes: ea2ce1ba99 ("libbpf: Fix BTF-to-C converter's padding logic")
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20221215183605.4149488-1-andrii@kernel.org
Turns out that btf_dump API doesn't handle a bunch of tricky corner
cases, as reported by Per, and further discovered using his testing
Python script ([0]).
This patch revamps btf_dump's padding logic significantly, making it
more correct and also avoiding unnecessary explicit padding, where
compiler would pad naturally. This overall topic turned out to be very
tricky and subtle, there are lots of subtle corner cases. The comments
in the code tries to give some clues, but comments themselves are
supposed to be paired with good understanding of C alignment and padding
rules. Plus some experimentation to figure out subtle things like
whether `long :0;` means that struct is now forced to be long-aligned
(no, it's not, turns out).
Anyways, Per's script, while not completely correct in some known
situations, doesn't show any obvious cases where this logic breaks, so
this is a nice improvement over the previous state of this logic.
Some selftests had to be adjusted to accommodate better use of natural
alignment rules, eliminating some unnecessary padding, or changing it to
`type: 0;` alignment markers.
Note also that for when we are in between bitfields, we emit explicit
bit size, while otherwise we use `: 0`, this feels much more natural in
practice.
Next patch will add few more test cases, found through randomized Per's
script.
[0] https://lore.kernel.org/bpf/85f83c333f5355c8ac026f835b18d15060725fcb.camel@ericsson.com/
Reported-by: Per Sundström XP <per.xp.sundstrom@ericsson.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-6-andrii@kernel.org
btf__align_of() is supposed to be return alignment requirement of
a requested BTF type. For STRUCT/UNION it doesn't always return correct
value, because it calculates alignment only based on field types. But
for packed structs this is not enough, we need to also check field
offsets and struct size. If field offset isn't aligned according to
field type's natural alignment, then struct must be packed. Similarly,
if struct size is not a multiple of struct's natural alignment, then
struct must be packed as well.
This patch fixes this issue precisely by additionally checking these
conditions.
Fixes: 3d208f4ca1 ("libbpf: Expose btf__align_of() API")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-5-andrii@kernel.org
Turns out C allows to force enum to be 1-byte or 8-byte explicitly using
mode(byte) or mode(word), respecticely. Linux sources are using this in
some cases. This is imporant to handle correctly, as enum size
determines corresponding fields in a struct that use that enum type. And
if enum size is incorrect, this will lead to invalid struct layout. So
add mode(byte) and mode(word) attribute support to btf_dump APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-3-andrii@kernel.org
btf_dump APIs emit unnecessary tabs when emitting struct/union
definition that fits on the single line. Before this patch we'd get:
struct blah {<tab>};
This patch fixes this and makes sure that we get more natural:
struct blah {};
Fixes: 44a726c3f2 ("bpftool: Print newline before '}' for struct with padding only fields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-2-andrii@kernel.org
This is a small improvement in libbpf_strerror. When libbpf_strerror
is used to obtain the system error description, if the length of the
buf is insufficient, libbpf_sterror returns ERANGE and sets errno to
ERANGE.
However, this processing is not performed when the error code
customized by libbpf is obtained. Make some minor improvements here,
return -ERANGE and set errno to ERANGE when buf is not enough for
custom description.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221210082045.233697-1-liuxin350@huawei.com
libtraceevent is now out-of-date and it is better to depend on the
system version. Remove this code that is no longer depended upon by
any builds.
Committer notes:
Removed the removed tools/lib/traceevent/ from tools/perf/MANIFEST, so
that 'make perf-tar-src-pkg' works.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20221130062935.2219247-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20221202045743.2639466-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20221202045743.2639466-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20221202045743.2639466-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20221202045743.2639466-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parse USDT arguments like "8@(%rsp)" on x86. These are emmited by
SystemTap. The argument syntax is similar to the existing "memory
dereference case" but the offset left out as it's zero (i.e. read
the value from the address in the register). We treat it the same
as the the "memory dereference case", but set the offset to 0.
I've tested that this fixes the "unrecognized arg #N spec: 8@(%rsp).."
error I've run into when attaching to a probe with such an argument.
Attaching and reading the correct argument values works.
Something similar might be needed for the other supported
architectures.
[0] Closes: https://github.com/libbpf/libbpf/issues/559
Signed-off-by: Timo Hunziker <timo.hunziker@gmx.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221203123746.2160-1-timo.hunziker@eclipso.ch
Current libbpf Makefile does not contain the help command, which
is inconvenient to use. Similar to the Makefile help command of the
perf, a help command is provided to list the commands supported by
libbpf make and the functions of the commands.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221202081738.128513-1-liuxin350@huawei.com
C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.
More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:
enum bpf_stats_type: int;
In C (and I believe it's a GCC extension also), such forward declaration
is simply:
enum bpf_stats_type;
Further, in Linux UAPI this enum is defined in pure C way:
enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }
And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.
To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.
[0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
[1] Closes: https://github.com/libbpf/libbpf/issues/249
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
Currently LLVM fails to recognize .data.* as data section and defaults to .text
section. Later BPF backend tries to emit 4-byte NOP instruction which doesn't
exist in BPF ISA and aborts.
The fix for LLVM is pending:
https://reviews.llvm.org/D138477
While waiting for the fix lets workaround the linked_list test case
by using .bss.* prefix which is properly recognized by LLVM as BSS section.
Fix libbpf to support .bss. prefix and adjust tests.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add libtraceevent to the name so that this install_headers build
appears different to similar targets in different libraries. Add ;
after kbuffer.h install target for consistency.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libsubcmd to the name so that this install_headers build appears
different to similar targets in different libraries.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libperf to the name so that this install_headers build appears
different to similar targets in different libraries.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Missing @ when building libsymbol. Make the install echo specific to
installing the libsymbol headers.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf build makes the install_headers target, however, as there is
no action for this target a warning is always produced of:
make[3]: Nothing to be done for 'install_headers'.
Solve this by adding a display of 'INSTALL libbpf_headers'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing backslash that caused an install command to always appear
in build output. Make the install headers more specific.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Coverity is reporting that btf_dump_name_dups() doesn't check return
result of hashmap__find() call. This is intentional, so make it explicit
with (void) cast.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221117192824.4093553-1-andrii@kernel.org
The top two bits of size are used as busy and discard flags, so reject
the reservation that has any of these special bits in the size. With the
addition of validity check, these is also no need to check whether or
not total_size is overflowed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-5-houtao@huaweicloud.com
Similar with the overflow problem on ringbuf mmap, in user_ringbuf_map()
2 * max_entries may overflow u32 when mapping writeable region.
Fixing it by casting the size of writable mmap region into a __u64 and
checking whether or not there will be overflow during mmap.
Fixes: b66ccae01f ("bpf: Add libbpf logic for user-space ring buffer")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-4-houtao@huaweicloud.com
The maximum size of ringbuf is 2GB on x86-64 host, so 2 * max_entries
will overflow u32 when mapping producer page and data pages. Only
casting max_entries to size_t is not enough, because for 32-bits
application on 64-bits kernel the size of read-only mmap region
also could overflow size_t.
So fixing it by casting the size of read-only mmap region into a __u64
and checking whether or not there will be overflow during mmap.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-3-houtao@huaweicloud.com
Using page size as max_entries when probing ring buffer map, else the
probe may fail on host with 64KB page size (e.g., an ARM64 host).
After the fix, the output of "bpftool feature" on above host will be
correct.
Before :
eBPF map_type ringbuf is NOT available
eBPF map_type user_ringbuf is NOT available
After :
eBPF map_type ringbuf is available
eBPF map_type user_ringbuf is available
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-2-houtao@huaweicloud.com
The perf/cpumap.h header is getting the 'struct perf_cpu_map' forward
declaration by luck, add it.
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It just hits the header guard, becoming a no-op, ditch it.
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sufficient Makefile for libsymbol to be built as a dependency and
header files installed.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Headers necessary for the perf build. Note, internal headers are also
installed as these are necessary for the build.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This allows libsubcmd to be installed as a dependency.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This allows libapi to be installed as a dependency.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cmc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Cc: nicolas schier <nicolas@fjasle.eu>
Link: http://lore.kernel.org/lkml/20221109184914.1357295-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tracing_events__opendir() allows iteration over files in
<debugfs>/tracing/events but with an arbitrary sort order.
Add a scandir alternative where the results are alphabetically sorted.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed following checkpatch issues:
WARNING: Block comments use a trailing */ on a separate line
+ * other BPF program's BTF object */
WARNING: Possible repeated word: 'be'
+ * name. This is important to be be able to find corresponding BTF
ERROR: switch and case should be at the same indent
+ switch (ext->kcfg.sz) {
+ case 1: *(__u8 *)ext_val = value; break;
+ case 2: *(__u16 *)ext_val = value; break;
+ case 4: *(__u32 *)ext_val = value; break;
+ case 8: *(__u64 *)ext_val = value; break;
+ default:
ERROR: trailing statements should be on next line
+ case 1: *(__u8 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 2: *(__u16 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 4: *(__u32 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 8: *(__u64 *)ext_val = value; break;
ERROR: code indent should use tabs where possible
+ }$
WARNING: please, no spaces at the start of a line
+ }$
WARNING: Block comments use a trailing */ on a separate line
+ * for faster search */
ERROR: code indent should use tabs where possible
+^I^I^I^I^I^I &ext->kcfg.is_signed);$
WARNING: braces {} are not necessary for single statement blocks
+ if (err) {
+ return err;
+ }
ERROR: code indent should use tabs where possible
+^I^I^I^I sizeof(*obj->btf_modules), obj->btf_module_cnt + 1);$
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221113190648.38556-3-tegongkang@gmail.com
We need to pass '*link' to final libbpf_get_error,
because that one holds the return value, not 'link'.
Fixes: 4fa5bcfe07 ("libbpf: Allow BPF program auto-attach handlers to bail out")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221114145257.882322-1-jolsa@kernel.org
GCC 11.3.0 fails to compile btf_dump.c due to the following error,
which seems to originate in btf_dump_struct_data where the returned
value would be uninitialized if btf_vlen returns zero.
btf_dump.c: In function ‘btf_dump_dump_type_data’:
btf_dump.c:2363:12: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2363 | if (err < 0)
| ^
Fixes: 920d16af9b ("libbpf: BTF dumper support for typed data")
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/87zgcu60hq.fsf@gmail.com
A fix for the LLVM compilation error while building bpftool.
Replaces the expression:
_Static_assert((p) == NULL || ...)
by expression:
_Static_assert((__builtin_constant_p((p)) ? (p) == NULL : 0) || ...)
When "p" is not a constant the former is not considered to be a
constant expression by LLVM 14.
The error was introduced in the following patch-set: [1].
The error was reported here: [2].
[1] https://lore.kernel.org/bpf/20221109142611.879983-1-eddyz87@gmail.com/
[2] https://lore.kernel.org/all/202211110355.BcGcbZxP-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c302378bc1 ("libbpf: Hashmap interface update to allow both long and void* keys/values")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221110223240.1350810-1-eddyz87@gmail.com
Resolve forward declarations that don't take part in type graphs
comparisons if declaration name is unambiguous. Example:
CU #1:
struct foo; // standalone forward declaration
struct foo *some_global;
CU #2:
struct foo { int x; };
struct foo *another_global;
The `struct foo` from CU #1 is not a part of any definition that is
compared against another definition while `btf_dedup_struct_types`
processes structural types. The the BTF after `btf_dedup_struct_types`
the BTF looks as follows:
[1] STRUCT 'foo' size=4 vlen=1 ...
[2] INT 'int' size=4 ...
[3] PTR '(anon)' type_id=1
[4] FWD 'foo' fwd_kind=struct
[5] PTR '(anon)' type_id=4
This commit adds a new pass `btf_dedup_resolve_fwds`, that maps such
forward declarations to structs or unions with identical name in case
if the name is not ambiguous.
The pass is positioned before `btf_dedup_ref_types` so that types
[3] and [5] could be merged as a same type after [1] and [4] are merged.
The final result for the example above looks as follows:
[1] STRUCT 'foo' size=4 vlen=1
'x' type_id=2 bits_offset=0
[2] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[3] PTR '(anon)' type_id=1
For defconfig kernel with BTF enabled this removes 63 forward
declarations. Examples of removed declarations: `pt_regs`, `in6_addr`.
The running time of `btf__dedup` function is increased by about 3%.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-3-eddyz87@gmail.com
An update for libbpf's hashmap interface from void* -> void* to a
polymorphic one, allowing both long and void* keys and values.
This simplifies many use cases in libbpf as hashmaps there are mostly
integer to integer.
Perf copies hashmap implementation from libbpf and has to be
updated as well.
Changes to libbpf, selftests/bpf and perf are packed as a single
commit to avoid compilation issues with any future bisect.
Polymorphic interface is acheived by hiding hashmap interface
functions behind auxiliary macros that take care of necessary
type casts, for example:
#define hashmap_cast_ptr(p) \
({ \
_Static_assert((p) == NULL || sizeof(*(p)) == sizeof(long),\
#p " pointee should be a long-sized integer or a pointer"); \
(long *)(p); \
})
bool hashmap_find(const struct hashmap *map, long key, long *value);
#define hashmap__find(map, key, value) \
hashmap_find((map), (long)(key), hashmap_cast_ptr(value))
- hashmap__find macro casts key and value parameters to long
and long* respectively
- hashmap_cast_ptr ensures that value pointer points to a memory
of appropriate size.
This hack was suggested by Andrii Nakryiko in [1].
This is a follow up for [2].
[1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/
[2] https://lore.kernel.org/bpf/af1facf9-7bc8-8a3d-0db4-7b3f333589a2@meta.com/T/#m65b28f1d6d969fcd318b556db6a3ad499a42607d
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-2-eddyz87@gmail.com
Changes de-duplication logic for enums in the following way:
- update btf_hash_enum to ignore size and kind fields to get
ENUM and ENUM64 types in a same hash bucket;
- update btf_compat_enum to consider enum fwd to be compatible with
full enum64 (and vice versa);
This allows BTF de-duplication in the following case:
// CU #1
enum foo;
struct s {
enum foo *a;
} *x;
// CU #2
enum foo {
x = 0xfffffffff // big enough to force enum64
};
struct s {
enum foo *a;
} *y;
De-duplicated BTF prior to this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
[6] STRUCT 's' size=8 vlen=1
'a' type_id=8 bits_offset=0
[7] ENUM 'foo' encoding=UNSIGNED size=4 vlen=0
[8] PTR '(anon)' type_id=7
[9] PTR '(anon)' type_id=6
De-duplicated BTF after this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
Enum forward declarations in C do not provide information about
enumeration values range. Thus the `btf_type->size` field is
meaningless for forward enum declarations. In fact, GCC does not
encode size in DWARF for forward enum declarations
(but dwarves sets enumeration size to a default value of `sizeof(int) * 8`
when size is not specified see dwarf_loader.c:die__create_new_enumeration).
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101235413.1824260-1-eddyz87@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY2GuKgAKCRDbK58LschI
gy32AP9PI0e/bUGDExKJ8g97PeeEtnpj4TTI6g+XKILtYnyXlgD/Rk4j2D/f3IBF
Ha9TmqYvAUim+U/g50vUrNuoNLNJ5w8=
=OKC1
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2022-11-02
We've added 70 non-merge commits during the last 14 day(s) which contain
a total of 96 files changed, 3203 insertions(+), 640 deletions(-).
The main changes are:
1) Make cgroup local storage available to non-cgroup attached BPF programs
such as tc BPF ones, from Yonghong Song.
2) Avoid unnecessary deadlock detection and failures wrt BPF task storage
helpers, from Martin KaFai Lau.
3) Add LLVM disassembler as default library for dumping JITed code
in bpftool, from Quentin Monnet.
4) Various kprobe_multi_link fixes related to kernel modules,
from Jiri Olsa.
5) Optimize x86-64 JIT with emitting BMI2-based shift instructions,
from Jie Meng.
6) Improve BPF verifier's memory type compatibility for map key/value
arguments, from Dave Marchevsky.
7) Only create mmap-able data section maps in libbpf when data is exposed
via skeletons, from Andrii Nakryiko.
8) Add an autoattach option for bpftool to load all object assets,
from Wang Yufen.
9) Various memory handling fixes for libbpf and BPF selftests,
from Xu Kuohai.
10) Initial support for BPF selftest's vmtest.sh on arm64,
from Manu Bretelle.
11) Improve libbpf's BTF handling to dedup identical structs,
from Alan Maguire.
12) Add BPF CI and denylist documentation for BPF selftests,
from Daniel Müller.
13) Check BPF cpumap max_entries before doing allocation work,
from Florian Lehner.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (70 commits)
samples/bpf: Fix typo in README
bpf: Remove the obsolte u64_stats_fetch_*_irq() users.
bpf: check max_entries before allocating memory
bpf: Fix a typo in comment for DFS algorithm
bpftool: Fix spelling mistake "disasembler" -> "disassembler"
selftests/bpf: Fix bpftool synctypes checking failure
selftests/bpf: Panic on hard/soft lockup
docs/bpf: Add documentation for new cgroup local storage
selftests/bpf: Add test cgrp_local_storage to DENYLIST.s390x
selftests/bpf: Add selftests for new cgroup local storage
selftests/bpf: Fix test test_libbpf_str/bpf_map_type_str
bpftool: Support new cgroup local storage
libbpf: Support new cgroup local storage
bpf: Implement cgroup storage available to non-cgroup-attached bpf progs
bpf: Refactor some inode/task/sk storage functions for reuse
bpf: Make struct cgroup btf id global
selftests/bpf: Tracing prog can still do lookup under busy lock
selftests/bpf: Ensure no task storage failure for bpf_lsm.s prog due to deadlock detection
bpf: Add new bpf_task_storage_delete proto with no deadlock detection
bpf: bpf_task_storage_delete_recur does lookup first before the deadlock check
...
====================
Link: https://lore.kernel.org/r/20221102062120.5724-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for new cgroup local storage.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042856.673989-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When examining module BTF, it is common to see core kernel structures
such as sk_buff, net_device duplicated in the module. After adding
debug messaging to BTF it turned out that much of the problem
was down to the identical struct test failing during deduplication;
sometimes the compiler adds identical structs. However
it turns out sometimes that type ids of identical struct members
can also differ, even when the containing structs are still identical.
To take an example, for struct sk_buff, debug messaging revealed
that the identical struct matching was failing for the anon
struct "headers"; specifically for the first field:
__u8 __pkt_type_offset[0]; /* 128 0 */
Looking at the code in BTF deduplication, we have code that guards
against the possibility of identical struct definitions, down to
type ids, and identical array definitions. However in this case
we have a struct which is being defined twice but does not have
identical type ids since each duplicate struct has separate type
ids for the above array member. A similar problem (though not
observed) could occur for struct-in-struct.
The solution is to make the "identical struct" test check members
not just for matching ids, but to also check if they in turn are
identical structs or arrays.
The results of doing this are quite dramatic (for some modules
at least); I see the number of type ids drop from around 10000
to just over 1000 in one module for example.
For testing use latest pahole or apply [1], otherwise dedups
can fail for the reasons described there.
Also fix return type of btf_dedup_identical_arrays() as
suggested by Andrii to match boolean return type used
elsewhere.
Fixes: efdd3eb801 ("libbpf: Accommodate DWARF/compiler bug with duplicated structs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1666622309-22289-1-git-send-email-alan.maguire@oracle.com
[1] https://lore.kernel.org/bpf/1666364523-9648-1-git-send-email-alan.maguire
The reg_name in parse_usdt_arg() is used to hold register name, which
is short enough to be held in a 16-byte array, so we could define
reg_name as char reg_name[16] to avoid dynamically allocating reg_name
with sscanf.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221018145538.2046842-1-xukuohai@huaweicloud.com
Teach libbpf to not add BPF_F_MMAPABLE flag unnecessarily for ARRAY maps
that are backing data sections, if such data sections don't expose any
variables to user-space. Exposed variables are those that have
STB_GLOBAL or STB_WEAK ELF binding and correspond to BTF VAR's
BTF_VAR_GLOBAL_ALLOCATED linkage.
The overall idea is that if some data section doesn't have any variable that
is exposed through BPF skeleton, then there is no reason to make such
BPF array mmapable. Making BPF array mmapable is not a free no-op
action, because BPF verifier doesn't allow users to put special objects
(such as BPF spin locks, RB tree nodes, linked list nodes, kptrs, etc;
anything that has a sensitive internal state that should not be modified
arbitrarily from user space) into mmapable arrays, as there is no way to
prevent user space from corrupting such sensitive state through direct
memory access through memory-mapped region.
By making sure that libbpf doesn't add BPF_F_MMAPABLE flag to BPF array
maps corresponding to data sections that only have static variables
(which are not supposed to be visible to user space according to libbpf
and BPF skeleton rules), users now can have spinlocks, kptrs, etc in
either default .bss/.data sections or custom .data.* sections (assuming
there are no global variables in such sections).
The only possible hiccup with this approach is the need to use global
variables during BPF static linking, even if it's not intended to be
shared with user space through BPF skeleton. To allow such scenarios,
extend libbpf's STV_HIDDEN ELF visibility attribute handling to
variables. Libbpf is already treating global hidden BPF subprograms as
static subprograms and adjusts BTF accordingly to make BPF verifier
verify such subprograms as static subprograms with preserving entire BPF
verifier state between subprog calls. This patch teaches libbpf to treat
global hidden variables as static ones and adjust BTF information
accordingly as well. This allows to share variables between multiple
object files during static linking, but still keep them internal to BPF
program and not get them exposed through BPF skeleton.
Note, that if the user has some advanced scenario where they absolutely
need BPF_F_MMAPABLE flag on .data/.bss/.rodata BPF array map despite
only having static variables, they still can achieve this by forcing it
through explicit bpf_map__set_map_flags() API.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20221019002816.359650-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor libbpf's BTF fixup step during BPF object open phase. The only
functional change is that we now ignore BTF_VAR_GLOBAL_EXTERN variables
during fix up, not just BTF_VAR_STATIC ones, which shouldn't cause any
change in behavior as there shouldn't be any extern variable in data
sections for valid BPF object anyways.
Otherwise it's just collapsing two functions that have no reason to be
separate, and switching find_elf_var_offset() helper to return entire
symbol pointer, not just its offset. This will be used by next patch to
get ELF symbol visibility.
While refactoring, also "normalize" debug messages inside
btf_fixup_datasec() to follow general libbpf style and print out data
section name consistently, where it's available.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221019002816.359650-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY08JQQAKCRDbK58LschI
g0M0AQCWGrJcnQFut1qwR9efZUadwxtKGAgpaA/8Smd8+v7c8AD/SeHQuGfkFiD6
rx18hv1mTfG0HuPnFQy6YZQ98vmznwE=
=DaeS
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-18
We've added 33 non-merge commits during the last 14 day(s) which contain
a total of 31 files changed, 874 insertions(+), 538 deletions(-).
The main changes are:
1) Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs,
from Hou Tao & Paul E. McKenney.
2) Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values. In the wild we have seen OS vendors doing buggy backports
where helper call numbers mismatched. This is an attempt to make
backports more foolproof, from Andrii Nakryiko.
3) Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions,
from Roberto Sassu.
4) Fix libbpf's BTF dumper for structs with padding-only fields,
from Eduard Zingerman.
5) Fix various libbpf bugs which have been found from fuzzing with
malformed BPF object files, from Shung-Hsi Yu.
6) Clean up an unneeded check on existence of SSE2 in BPF x86-64 JIT,
from Jie Meng.
7) Fix various ASAN bugs in both libbpf and selftests when running
the BPF selftest suite on arm64, from Xu Kuohai.
8) Fix missing bpf_iter_vma_offset__destroy() call in BPF iter selftest
and use in-skeleton link pointer to remove an explicit bpf_link__destroy(),
from Jiri Olsa.
9) Fix BPF CI breakage by pointing to iptables-legacy instead of relying
on symlinked iptables which got upgraded to iptables-nft,
from Martin KaFai Lau.
10) Minor BPF selftest improvements all over the place, from various others.
* tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (33 commits)
bpf/docs: Update README for most recent vmtest.sh
bpf: Use rcu_trace_implies_rcu_gp() for program array freeing
bpf: Use rcu_trace_implies_rcu_gp() in local storage map
bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator
rcu-tasks: Provide rcu_trace_implies_rcu_gp()
selftests/bpf: Use sys_pidfd_open() helper when possible
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
libbpf: Deal with section with no data gracefully
libbpf: Use elf_getshdrnum() instead of e_shnum
selftest/bpf: Fix error usage of ASSERT_OK in xdp_adjust_tail.c
selftests/bpf: Fix error failure of case test_xdp_adjust_tail_grow
selftest/bpf: Fix memory leak in kprobe_multi_test
selftests/bpf: Fix memory leak caused by not destroying skeleton
libbpf: Fix memory leak in parse_usdt_arg()
libbpf: Fix use-after-free in btf_dump_name_dups
selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test
selftests/bpf: Alphabetize DENYLISTs
selftests/bpf: Add tests for _opts variants of bpf_*_get_fd_by_id()
libbpf: Introduce bpf_link_get_fd_by_id_opts()
libbpf: Introduce bpf_btf_get_fd_by_id_opts()
...
====================
Link: https://lore.kernel.org/r/20221018210631.11211-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Its just for that __packed define, so use it expanded as __attribute__((packed)),
like the other files in /usr/include do.
This was problem was preventing building the libperf examples on ALT
Linux and Fedora 35, fix it.
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Levin <ldv@altlinux.org
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y0lnpl2Ix7VljVDc@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there are no program sections, obj->programs is left unallocated,
and find_prog_by_sec_insn()'s search lands on &obj->programs[0] == NULL,
and will cause null-pointer dereference in the following access to
prog->sec_idx.
Guard the search with obj->nr_programs similar to what's being done in
__bpf_program__iter() to prevent null-pointer access from happening.
Fixes: db2b8b0642 ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012022353.7350-4-shung-hsi.yu@suse.com
ELF section data pointer returned by libelf may be NULL (if section has
SHT_NOBITS), so null check section data pointer before attempting to
copy license and kversion section.
Fixes: cb1e5e9619 ("bpf tools: Collect version and license from ELF sections")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012022353.7350-3-shung-hsi.yu@suse.com
This commit replace e_shnum with the elf_getshdrnum() helper to fix two
oss-fuzz-reported heap-buffer overflow in __bpf_object__open. Both
reports are incorrectly marked as fixed and while still being
reproducible in the latest libbpf.
# clusterfuzz-testcase-minimized-bpf-object-fuzzer-5747922482888704
libbpf: loading object 'fuzz-object' from buffer
libbpf: sec_cnt is 0
libbpf: elf: section(1) .data, size 0, link 538976288, flags 2020202020202020, type=2
libbpf: elf: section(2) .data, size 32, link 538976288, flags 202020202020ff20, type=1
=================================================================
==13==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000000c0 at pc 0x0000005a7b46 bp 0x7ffd12214af0 sp 0x7ffd12214ae8
WRITE of size 4 at 0x6020000000c0 thread T0
SCARINESS: 46 (4-byte-write-heap-buffer-overflow-far-from-bounds)
#0 0x5a7b45 in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3414:24
#1 0x5733c0 in bpf_object_open /src/libbpf/src/libbpf.c:7223:16
#2 0x5739fd in bpf_object__open_mem /src/libbpf/src/libbpf.c:7263:20
...
The issue lie in libbpf's direct use of e_shnum field in ELF header as
the section header count. Where as libelf implemented an extra logic
that, when e_shnum == 0 && e_shoff != 0, will use sh_size member of the
initial section header as the real section header count (part of ELF
spec to accommodate situation where section header counter is larger
than SHN_LORESERVE).
The above inconsistency lead to libbpf writing into a zero-entry calloc
area. So intead of using e_shnum directly, use the elf_getshdrnum()
helper provided by libelf to retrieve the section header counter into
sec_cnt.
Fixes: 0d6988e16a ("libbpf: Fix section counting logic")
Fixes: 25bbbd7a44 ("libbpf: Remove assumptions about uniqueness of .rodata/.data/.bss maps")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=40868
Link: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=40957
Link: https://lore.kernel.org/bpf/20221012022353.7350-2-shung-hsi.yu@suse.com
In the arm64 version of parse_usdt_arg(), when sscanf returns 2, reg_name
is allocated but not freed. Fix it.
Fixes: 0f8619929c ("libbpf: Usdt aarch64 arg parsing support")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-3-xukuohai@huaweicloud.com
ASAN reports an use-after-free in btf_dump_name_dups:
ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928
READ of size 2 at 0xffff927006db thread T0
#0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614)
#1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127
#2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143
#3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212
#4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525
#5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552
#6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567
#7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912
#8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798
#9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282
#10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236
#11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#15 0xaaaab5d65990 (test_progs+0x185990)
0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0)
freed by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032
#7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232
#8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#12 0xaaaab5d65990 (test_progs+0x185990)
previously allocated by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070
#7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102
#8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162
#9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#13 0xaaaab5d65990 (test_progs+0x185990)
The reason is that the key stored in hash table name_map is a string
address, and the string memory is allocated by realloc() function, when
the memory is resized by realloc() later, the old memory may be freed,
so the address stored in name_map references to a freed memory, causing
use-after-free.
Fix it by storing duplicated string address in name_map.
Fixes: 919d2b1dbb ("libbpf: Allow modification of BTF and add btf__add_str API")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com
- Add support for AMD on 'perf mem' and 'perf c2c', the kernel enablement
patches went via tip.
Example:
$ sudo perf mem record -- -c 10000
^C[ perf record: Woken up 227 times to write data ]
[ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]
$ sudo perf mem report -F mem,sample,snoop
Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
Memory access Samples Snoop
N/A 700620 N/A
L1 hit 126675 N/A
L2 hit 424 N/A
L3 hit 664 HitM
L3 hit 10 N/A
Local RAM hit 2 N/A
Remote RAM (1 hop) hit 8558 N/A
Remote Cache (1 hop) hit 3 N/A
Remote Cache (1 hop) hit 2 HitM
Remote Cache (2 hops) hit 10 HitM
Remote Cache (2 hops) hit 6 N/A
Uncached hit 4 N/A
$
- "perf lock" improvements:
- Add -E/--entries option to limit the number of entries to display, say to ask for
just the top 5 contended locks.
- Add -q/--quiet option to suppress header and debug messages.
- Add a 'perf test' kernel lock contention entry to test 'perf lock'.
- "perf lock contention" improvements:
- Ask BPF's bpf_get_stackid() to skip some callchain entries.
The ones closer to the tooling are bpf related and not that interesting, the
ones calling the locking function are the ones we're interested in, example
of a full, unskipped callstack:
- Allow changing the callstack depth and number of entries to skip.
1 10.74 us 10.74 us 10.74 us spinlock __bpf_trace_contention_begin+0xb
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffbb8b8e75 bpf_trace_run2+0x35
0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb
0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5
0xffffffffbc1c26ff _raw_spin_lock+0x1f
0xffffffffbb841015 tick_do_update_jiffies64+0x25
0xffffffffbb8409ee tick_irq_enter+0x9e
- Show full callstack in verbose mode (-v option), sometimes this is desirable
instead of showing just one callstack entry.
- Allow multiple time ranges in 'perf record --delay' to help in reducing the
amount of data collected from hardware tracing (Intel PT, etc) when there is
a rough idea of periods of time where events of interest take time.
- Add Intel PT to record only decoder debug messages when error happens.
- Improve layout of Intel PT man page.
- Add new branch types: alignment, data and inst faults and arch specific ones,
such as fiq, debug_halt, debug_exit, debug_inst and debug_data on arm64.
Kernel enablement went thru the tip tree.
- Fix 'perf probe' error log check in 'perf test' when no debuginfo is
available.
- Fix 'perf stat' aggregation mode logic, it should be looking at the CPU
not at the core number.
- Fix flags parsing in 'perf trace' filters.
- Introduce compact encoding of CPU range encoding on perf.data, to avoid
having a bitmap with all the CPUs.
- Improvements to the 'perf stat' metrics, including adding "core_wide", and
computing "smt" from the CPU topology.
- Add support to the new PERF_FORMAT_LOST perf_event_attr.read_format, that allows
tooling to ask for the precise number of lost samples for a given event.
- Add 'addr' sort key to see just the address of sampled instructions:
$ perf record -o- true | perf report -i- -s addr
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
# Samples: 12 of event 'cycles:u'
# Event count (approx.): 252512
#
# Overhead Address
# ........ ..................
42.96% 0x7f96f08443d7
29.55% 0x7f96f0859b50
14.76% 0x7f96f0852e02
8.30% 0x7f96f0855028
4.43% 0xffffffff8de01087
perf annotate: Toggle full address <-> offset display
- Add 'f' hotkey to the 'perf annotate' TUI interface when in 'disassembler output'
mode ('o' hotkey) to toggle showing full virtual address or just the offset.
- Cache DSO build-ids when synthesizing PERF_RECORD_MMAP records for pre-existing threads,
at the start of a 'perf record' session, speeding up that record startup phase.
- Add a command line option to specify build ids in 'perf inject'.
- Update JSON event files for the Intel alderlake, broadwell, broadwellde,
broadwellx, cascadelakex, haswell, haswellx, icelake, icelakex, ivybridge,
ivytown, jaketown, sandybridge, sapphirerapids, skylake, skylakex, and
tigerlake processors.
- Update vendor JSON event files for the ARM Neoverse V1 and E1 platforms.
- Add a 'perf test' entry for 'perf mem' where a struct has false sharing and
this gets detected in the 'perf mem' output, tested with Intel, AMD and ARM64
systems.
- Add a 'perf test' entry to test the resolution of java symbols, where an
output like this is expected:
8.18% jshell jitted-50116-29.so [.] Interpreter
0.75% Thread-1 jitted-83602-1670.so [.] jdk.internal.jimage.BasicImageReader.getString(int)
- Add tests for the ARM64 CoreSight hardware tracing feature, with specially
crafted pureloop, memcpy, thread loop and unroll tread that then gets
traced and the output compared with expected output.
Documentation explaining it is also included.
- Add per thread Intel PT 'perf test' entry to check that PERF_RECORD_TEXT_POKE events
are recorded per CPU, resulting in a mixture of per thread and per CPU events and mmaps,
verify that this gets all recorded correctly.
- Introduce pthread mutex wrappers to allow for building with clang's
-Wthread-safety, i.e. using the "guarded_by" "pt_guarded_by" "lockable",
"exclusive_lock_function", "exclusive_trylock_function",
"exclusive_locks_required", and "no_thread_safety_analysis" compiler function
attributes.
- Fix empty version number when building outside of a git repo.
- Improve feature detection display when multiple versions of a feature are present, such
as for binutils libbfd, that has a mix of possible ways to detect according to the
Linux distribution.
Previously in some cases we had:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
... libbfd-liberty: [ on ]
... libbfd-liberty-z: [ on ]
<SNIP>
Now for this case we show just the main feature:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
<SNIP>
- Remove some unused structs, variables, macros, function prototypes and
includes from various places.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY0CKuAAKCRCyPKLppCJ+
JywwAQDWLForEnEZNk92Fd3y342Lh9W/8z1V51dKK7XdY1cV6AD/Rn5L57v7k/yG
mG5w2Fd1J/xBjlsL/BvNlimUD2tbkQA=
=XPMg
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Add support for AMD on 'perf mem' and 'perf c2c', the kernel
enablement patches went via tip.
Example:
$ sudo perf mem record -- -c 10000
^C[ perf record: Woken up 227 times to write data ]
[ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]
$ sudo perf mem report -F mem,sample,snoop
Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
Memory access Samples Snoop
N/A 700620 N/A
L1 hit 126675 N/A
L2 hit 424 N/A
L3 hit 664 HitM
L3 hit 10 N/A
Local RAM hit 2 N/A
Remote RAM (1 hop) hit 8558 N/A
Remote Cache (1 hop) hit 3 N/A
Remote Cache (1 hop) hit 2 HitM
Remote Cache (2 hops) hit 10 HitM
Remote Cache (2 hops) hit 6 N/A
Uncached hit 4 N/A
$
- "perf lock" improvements:
- Add -E/--entries option to limit the number of entries to
display, say to ask for just the top 5 contended locks.
- Add -q/--quiet option to suppress header and debug messages.
- Add a 'perf test' kernel lock contention entry to test 'perf
lock'.
- "perf lock contention" improvements:
- Ask BPF's bpf_get_stackid() to skip some callchain entries.
The ones closer to the tooling are bpf related and not that
interesting, the ones calling the locking function are the ones
we're interested in, example of a full, unskipped callstack:
- Allow changing the callstack depth and number of entries to skip.
1 10.74 us 10.74 us 10.74 us spinlock __bpf_trace_contention_begin+0xb
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffbb8b8e75 bpf_trace_run2+0x35
0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb
0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5
0xffffffffbc1c26ff _raw_spin_lock+0x1f
0xffffffffbb841015 tick_do_update_jiffies64+0x25
0xffffffffbb8409ee tick_irq_enter+0x9e
- Show full callstack in verbose mode (-v option), sometimes this
is desirable instead of showing just one callstack entry.
- Allow multiple time ranges in 'perf record --delay' to help in
reducing the amount of data collected from hardware tracing (Intel
PT, etc) when there is a rough idea of periods of time where events
of interest take time.
- Add Intel PT to record only decoder debug messages when error
happens.
- Improve layout of Intel PT man page.
- Add new branch types: alignment, data and inst faults and arch
specific ones, such as fiq, debug_halt, debug_exit, debug_inst and
debug_data on arm64.
Kernel enablement went thru the tip tree.
- Fix 'perf probe' error log check in 'perf test' when no debuginfo is
available.
- Fix 'perf stat' aggregation mode logic, it should be looking at the
CPU not at the core number.
- Fix flags parsing in 'perf trace' filters.
- Introduce compact encoding of CPU range encoding on perf.data, to
avoid having a bitmap with all the CPUs.
- Improvements to the 'perf stat' metrics, including adding
"core_wide", and computing "smt" from the CPU topology.
- Add support to the new PERF_FORMAT_LOST perf_event_attr.read_format,
that allows tooling to ask for the precise number of lost samples for
a given event.
- Add 'addr' sort key to see just the address of sampled instructions:
$ perf record -o- true | perf report -i- -s addr
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
# Samples: 12 of event 'cycles:u'
# Event count (approx.): 252512
#
# Overhead Address
# ........ ..................
42.96% 0x7f96f08443d7
29.55% 0x7f96f0859b50
14.76% 0x7f96f0852e02
8.30% 0x7f96f0855028
4.43% 0xffffffff8de01087
perf annotate: Toggle full address <-> offset display
- Add 'f' hotkey to the 'perf annotate' TUI interface when in
'disassembler output' mode ('o' hotkey) to toggle showing full
virtual address or just the offset.
- Cache DSO build-ids when synthesizing PERF_RECORD_MMAP records for
pre-existing threads, at the start of a 'perf record' session,
speeding up that record startup phase.
- Add a command line option to specify build ids in 'perf inject'.
- Update JSON event files for the Intel alderlake, broadwell,
broadwellde, broadwellx, cascadelakex, haswell, haswellx, icelake,
icelakex, ivybridge, ivytown, jaketown, sandybridge, sapphirerapids,
skylake, skylakex, and tigerlake processors.
- Update vendor JSON event files for the ARM Neoverse V1 and E1
platforms.
- Add a 'perf test' entry for 'perf mem' where a struct has false
sharing and this gets detected in the 'perf mem' output, tested with
Intel, AMD and ARM64 systems.
- Add a 'perf test' entry to test the resolution of java symbols, where
an output like this is expected:
8.18% jshell jitted-50116-29.so [.] Interpreter
0.75% Thread-1 jitted-83602-1670.so [.] jdk.internal.jimage.BasicImageReader.getString(int)
- Add tests for the ARM64 CoreSight hardware tracing feature, with
specially crafted pureloop, memcpy, thread loop and unroll tread that
then gets traced and the output compared with expected output.
Documentation explaining it is also included.
- Add per thread Intel PT 'perf test' entry to check that
PERF_RECORD_TEXT_POKE events are recorded per CPU, resulting in a
mixture of per thread and per CPU events and mmaps, verify that this
gets all recorded correctly.
- Introduce pthread mutex wrappers to allow for building with clang's
-Wthread-safety, i.e. using the "guarded_by" "pt_guarded_by"
"lockable", "exclusive_lock_function", "exclusive_trylock_function",
"exclusive_locks_required", and "no_thread_safety_analysis" compiler
function attributes.
- Fix empty version number when building outside of a git repo.
- Improve feature detection display when multiple versions of a feature
are present, such as for binutils libbfd, that has a mix of possible
ways to detect according to the Linux distribution.
Previously in some cases we had:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
... libbfd-liberty: [ on ]
... libbfd-liberty-z: [ on ]
<SNIP>
Now for this case we show just the main feature:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
<SNIP>
- Remove some unused structs, variables, macros, function prototypes
and includes from various places.
* tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
perf script: Add missing fields in usage hint
perf mem: Print "LFB/MAB" for PERF_MEM_LVLNUM_LFB
perf mem/c2c: Avoid printing empty lines for unsupported events
perf mem/c2c: Add load store event mappings for AMD
perf mem/c2c: Set PERF_SAMPLE_WEIGHT for LOAD_STORE events
perf mem: Add support for printing PERF_MEM_LVLNUM_{CXL|IO}
perf amd ibs: Sync arch/x86/include/asm/amd-ibs.h header with the kernel
tools headers UAPI: Sync include/uapi/linux/perf_event.h header with the kernel
perf stat: Fix cpu check to use id.cpu.cpu in aggr_printout()
perf test coresight: Add relevant documentation about ARM64 CoreSight testing
perf test: Add git ignore for tmp and output files of ARM CoreSight tests
perf test coresight: Add unroll thread test shell script
perf test coresight: Add unroll thread test tool
perf test coresight: Add thread loop test shell scripts
perf test coresight: Add thread loop test tool
perf test coresight: Add memcpy thread test shell script
perf test coresight: Add memcpy thread test tool
perf test: Add git ignore for perf data generated by the ARM CoreSight tests
perf test: Add arm64 asm pureloop test shell script
perf test: Add asm pureloop test tool
...
Introduce bpf_link_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_link_get_fd_by_id(), and call bpf_link_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_link_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-6-roberto.sassu@huaweicloud.com
Introduce bpf_btf_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_btf_get_fd_by_id(), and call bpf_btf_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_btf_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-5-roberto.sassu@huaweicloud.com
Introduce bpf_prog_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_prog_get_fd_by_id(), and call bpf_prog_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_prog_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-4-roberto.sassu@huaweicloud.com
Define a new data structure called bpf_get_fd_by_id_opts, with the member
open_flags, to be used by callers of the _opts variants of
bpf_*_get_fd_by_id() to specify the permissions needed for the file
descriptor to be obtained.
Also, introduce bpf_map_get_fd_by_id_opts(), to let the caller pass a
bpf_get_fd_by_id_opts structure.
Finally, keep the existing bpf_map_get_fd_by_id(), and call
bpf_map_get_fd_by_id_opts() with NULL as opts argument, to request
read-write permissions (current behavior).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-3-roberto.sassu@huaweicloud.com
From Phil Auld:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
From me:
cpumask: cleanup nr_cpu_ids vs nr_cpumask_bits mess
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
From me:
lib: optimize find_bit() functions
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros.
From me:
lib/find: add find_nth_bit()
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
From me:
cpumask: repair cpumask_check()
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
From Valentin Schneider:
bitmap,cpumask: Add for_each_cpu_andnot() and for_each_cpu_andnot()
Extends the API with one more function and applies it in sched/core.
-----BEGIN PGP SIGNATURE-----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=Q/+F
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)
- cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
- optimize find_bit() functions (me)
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
macros.
- add find_nth_bit() (me)
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
- repair cpumask_check() (me)
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
- Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
Schneider)
Extends the API with one more function and applies it in sched/core.
* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
lib/test_cpumask: Add for_each_cpu_and(not) tests
cpumask: Introduce for_each_cpu_andnot()
lib/find_bit: Introduce find_next_andnot_bit()
cpumask: fix checking valid cpu range
lib/bitmap: add tests for for_each() loops
lib/find: optimize for_each() macros
lib/bitmap: introduce for_each_set_bit_wrap() macro
lib/find_bit: add find_next{,_and}_bit_wrap
cpumask: switch for_each_cpu{,_not} to use for_each_bit()
net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
cpumask: add cpumask_nth_{,and,andnot}
lib/bitmap: remove bitmap_ord_to_pos
lib/bitmap: add tests for find_nth_bit()
lib: add find_nth{,_and,_andnot}_bit()
lib/bitmap: add bitmap_weight_and()
lib/bitmap: don't call __bitmap_weight() in kernel code
tools: sync find_bit() implementation
lib/find_bit: optimize find_next_bit() functions
lib/find_bit: create find_first_zero_bit_le()
...
For system-wide evsels, the thread map should be dummy - i.e. it has a
single entry of -1. But the code guarantees such a thread map, so no
need to handle it specially.
No functional change intended.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221003204647.1481128-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current code propagate evsel's cpu map settings to evlist when it's
added to an evlist. But the evlist->all_cpus and each evsel's cpus will
be updated in perf_evlist__set_maps() later. No need to do it before
evlist's cpus are set actually.
In fact it discards this intermediate all_cpus maps at the beginning
of perf_evlist__set_maps(). Let's not do this. It's only needed when
an evsel is added after the evlist cpu/thread maps are set.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221003204647.1481128-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting proper cpu and thread maps for system wide evsels regardless of
user requested cpu in __perf_evlist__propagate_maps(). Those evsels
need to be active on all cpus always. Do it in the libperf so that we
can guarantee it has proper maps.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221003204647.1481128-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
btf_dump_emit_struct_def attempts to print empty structures at a
single line, e.g. `struct empty {}`. However, it has to account for a
case when there are no regular but some padding fields in the struct.
In such case `vlen` would be zero, but size would be non-zero.
E.g. here is struct bpf_timer from vmlinux.h before this patch:
struct bpf_timer {
long: 64;
long: 64;};
And after this patch:
struct bpf_dynptr {
long: 64;
long: 64;
};
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221001104425.415768-1-eddyz87@gmail.com
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
Set environment variable "PREFIX", it will be used by invoked shell
script, e.g. the shell script uses it to find lib paths.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220925025835.70364-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add debug messages to enable scripts to track aspects of 'perf record'
behaviour. The messages will be consumed after 'perf record' has run,
with the exception of "perf record has started" which is consequently
flushed.
Put comments so developers know which messages are also being used by test
scripts.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220912083412.7058-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Often cpumaps encode a range of all CPUs, add a compact encoding that
doesn't require a bit mask or list of all CPUs.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is possible for casts to introduce alignment issues, prefer a union
for perf_record_event_update.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record __cmd_record() does not poll evlist pollfds. Instead it polls
thread_data[0].pollfd. That happens whether or not threads are being used.
perf record duplicates evlist mmap pollfds as needed for separate threads.
The non-perf-event represented by evlist->ctl_fd has to handled separately,
which is done explicitly, duplicating it into the thread_data[0] pollfds.
That approach neglects any other non-perf-event file descriptors. Currently
there is also done_fd which needs the same handling.
Add a new generalized approach.
Add fdarray_flag__non_perf_event to identify the file descriptors that
need the special handling. For those cases, also keep a mapping of the
evlist pollfd index and thread pollfd index, so that the evlist revents
can be updated.
Although this patch adds the new handling, it does not take it into use.
There is no functional change, but it is the precursor to a fix, so is
marked as a fix.
Fixes: 415ccb58f6 ("perf record: Introduce thread specific data array")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220824072814.16422-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-03
We've added 143 non-merge commits during the last 27 day(s) which contain
a total of 151 files changed, 8321 insertions(+), 1402 deletions(-).
The main changes are:
1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu.
2) Add support for struct-based arguments for trampoline based BPF programs,
from Yonghong Song.
3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa.
4) Batch of improvements to veristat selftest tool in particular to add CSV output,
a comparison mode for CSV outputs and filtering, from Andrii Nakryiko.
5) Add preparatory changes needed for the BPF core for upcoming BPF HID support,
from Benjamin Tissoires.
6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program
types, from Daniel Xu.
7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler.
8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer /
single-kernel-consumer semantics for BPF ring buffer, from David Vernet.
9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF
hashtab's bucket lock, from Hou Tao.
10) Allow creating an iterator that loops through only the resources of one
task/thread instead of all, from Kui-Feng Lee.
11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi.
12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT
entry which is not yet inserted, from Lorenzo Bianconi.
13) Remove invalid recursion check for struct_ops for TCP congestion control BPF
programs, from Martin KaFai Lau.
14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu.
15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa.
16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen.
17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu.
18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta.
19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits)
net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
Documentation: bpf: Add implementation notes documentations to table of contents
bpf, docs: Delete misformatted table.
selftests/xsk: Fix double free
bpftool: Fix error message of strerror
libbpf: Fix overrun in netlink attribute iteration
selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged"
samples/bpf: Fix typo in xdp_router_ipv4 sample
bpftool: Remove unused struct event_ring_info
bpftool: Remove unused struct btf_attach_point
bpf, docs: Add TOC and fix formatting.
bpf, docs: Add Clang note about BPF_ALU
bpf, docs: Move Clang notes to a separate file
bpf, docs: Linux byteswap note
bpf, docs: Move legacy packet instructions to a separate file
selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)
bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself
bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function
bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt()
bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
...
====================
Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I accidentally found that a change in commit 1045b03e07 ("netlink: fix
overrun in attribute iteration") was not synchronized to the function
`nla_ok` in tools/lib/bpf/nlattr.c, I think it is necessary to modify,
this patch will do it.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220930090708.62394-1-liuxin350@huawei.com
Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc. For instance,
the following code:
pub mod my_module {
pub struct MyType;
pub struct MyGenericType<T>(T);
pub trait MyTrait {
fn my_method() -> u32;
}
impl MyTrait for MyGenericType<MyType> {
fn my_method() -> u32 {
42
}
}
}
generates a symbol of length 96 when using the upcoming v0 mangling scheme:
_RNvXNtCshGpAVYOtgW1_7example9my_moduleINtB2_13MyGenericTypeNtB2_6MyTypeENtB2_7MyTrait9my_method
At the moment, Rust symbols may reach up to 300 in length.
Setting 512 as the maximum seems like a reasonable choice to
keep some headroom.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Drop the requirement for system-wide kernel UAPI headers to provide full
struct btf_enum64 definition. This is an unexpected requirement that
slipped in libbpf 1.0 and put unnecessary pressure ([0]) on users to have
a bleeding-edge kernel UAPI header from unreleased Linux 6.0.
To achieve this, we forward declare struct btf_enum64. But that's not
enough as there is btf_enum64_value() helper that expects to know the
layout of struct btf_enum64. So we get a bit creative with
reinterpreting memory layout as array of __u32 and accesing lo32/hi32
fields as array elements. Alternative way would be to have a local
pointer variable for anonymous struct with exactly the same layout as
struct btf_enum64, but that gets us into C++ compiler errors complaining
about invalid type casts. So play it safe, if ugly.
[0] Closes: https://github.com/libbpf/libbpf/issues/562
Fixes: d90ec262b3 ("libbpf: Add enum64 support for btf_dump")
Reported-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/bpf/20220927042940.147185-1-andrii@kernel.org
When running rootless with special capabilities like:
FOWNER / DAC_OVERRIDE / DAC_READ_SEARCH
The "access" API will not make the proper check if there is really
access to a file or not.
>From the access man page:
"
The check is done using the calling process's real UID and GID, rather
than the effective IDs as is done when actually attempting an operation
(e.g., open(2)) on the file. Similarly, for the root user, the check
uses the set of permitted capabilities rather than the set of effective
capabilities; ***and for non-root users, the check uses an empty set of
capabilities.***
"
What that means is that for non-root user the access API will not do the
proper validation if the process really has permission to a file or not.
To resolve this this patch replaces all the access API calls with
faccessat with AT_EACCESS flag.
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220925070431.1313680-1-arilou@gmail.com
When attach_prog_fd field was removed in libbpf 1.0 and replaced with
`long: 0` placeholder, it actually shifted all the subsequent fields by
8 byte. This is due to `long: 0` promising to adjust next field's offset
to long-aligned offset. But in this case we were already long-aligned
as pin_root_path is a pointer. So `long: 0` had no effect, and thus
didn't feel the gap created by removed attach_prog_fd.
Non-zero bitfield should have been used instead. I validated using
pahole. Originally kconfig field was at offset 40. With `long: 0` it's
at offset 32, which is wrong. With this change it's back at offset 40.
While technically libbpf 1.0 is allowed to break backwards
compatibility and applications should have been recompiled against
libbpf 1.0 headers, but given how trivial it is to preserve memory
layout, let's fix this.
Reported-by: Grant Seltzer Richman <grantseltzer@gmail.com>
Fixes: 146bf811f5 ("libbpf: remove most other deprecated high-level APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923230559.666608-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, the default vmlinux files at '/boot/vmlinux-*',
'/lib/modules/*/vmlinux-*' etc. are parsed with 'btf__parse_elf()' to
extract BTF. It is possible that these files are actually raw BTF files
similar to /sys/kernel/btf/vmlinux. So parse these files with
'btf__parse' which tries both raw format and ELF format.
This might be useful in some scenarios where users put their custom BTF
into known locations and don't want to specify btf_custom_path option.
Signed-off-by: Tao Chen <chentao.kernel@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/3f59fb5a345d2e4f10e16fe9e35fbc4c03ecaa3e.1662999860.git.chentao.kernel@linux.alibaba.com
Commit 34586d29f8 ("libbpf: Add new BPF_PROG2 macro") added BPF_PROG2
macro for trampoline based programs with struct arguments. Andrii
made a few suggestions to improve code quality and description.
This patch implemented these suggestions including better internal
macro name, consistent usage pattern for __builtin_choose_expr(),
simpler macro definition for always-inline func arguments and
better macro description.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20220910025214.1536510-1-yhs@fb.com
Now that all of the logic is in place in the kernel to support user-space
produced ring buffers, we can add the user-space logic to libbpf. This
patch therefore adds the following public symbols to libbpf:
struct user_ring_buffer *
user_ring_buffer__new(int map_fd,
const struct user_ring_buffer_opts *opts);
void *user_ring_buffer__reserve(struct user_ring_buffer *rb, __u32 size);
void *user_ring_buffer__reserve_blocking(struct user_ring_buffer *rb,
__u32 size, int timeout_ms);
void user_ring_buffer__submit(struct user_ring_buffer *rb, void *sample);
void user_ring_buffer__discard(struct user_ring_buffer *rb,
void user_ring_buffer__free(struct user_ring_buffer *rb);
A user-space producer must first create a struct user_ring_buffer * object
with user_ring_buffer__new(), and can then reserve samples in the
ring buffer using one of the following two symbols:
void *user_ring_buffer__reserve(struct user_ring_buffer *rb, __u32 size);
void *user_ring_buffer__reserve_blocking(struct user_ring_buffer *rb,
__u32 size, int timeout_ms);
With user_ring_buffer__reserve(), a pointer to a 'size' region of the ring
buffer will be returned if sufficient space is available in the buffer.
user_ring_buffer__reserve_blocking() provides similar semantics, but will
block for up to 'timeout_ms' in epoll_wait if there is insufficient space
in the buffer. This function has the guarantee from the kernel that it will
receive at least one event-notification per invocation to
bpf_ringbuf_drain(), provided that at least one sample is drained, and the
BPF program did not pass the BPF_RB_NO_WAKEUP flag to bpf_ringbuf_drain().
Once a sample is reserved, it must either be committed to the ring buffer
with user_ring_buffer__submit(), or discarded with
user_ring_buffer__discard().
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-4-void@manifault.com
We want to support a ringbuf map type where samples are published from
user-space, to be consumed by BPF programs. BPF currently supports a
kernel -> user-space circular ring buffer via the BPF_MAP_TYPE_RINGBUF
map type. We'll need to define a new map type for user-space -> kernel,
as none of the helpers exported for BPF_MAP_TYPE_RINGBUF will apply
to a user-space producer ring buffer, and we'll want to add one or
more helper functions that would not apply for a kernel-producer
ring buffer.
This patch therefore adds a new BPF_MAP_TYPE_USER_RINGBUF map type
definition. The map type is useless in its current form, as there is no
way to access or use it for anything until we one or more BPF helpers. A
follow-on patch will therefore add a new helper function that allows BPF
programs to run callbacks on samples that are published to the ring
buffer.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-2-void@manifault.com
Sync find_first_bit() and find_next_bit() implementation with the
mother kernel.
Also, drop unused find_last_bit() and find_next_clump8().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
We found that function btf_dump__dump_type_data can be called by the
user as an API, but in this function, the `opts` parameter may be used
as a null pointer.This causes `opts->indent_str` to trigger a NULL
pointer exception.
Fixes: 2ce8450ef5 ("libbpf: add bpf_object__open_{file, mem} w/ extensible opts")
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Weibin Kong <kongweibin2@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220917084809.30770-1-liuxin350@huawei.com
Fix SIGSEGV caused by libbpf trying to find attach type in vmlinux BTF
for freplace programs. It's wrong to search in vmlinux BTF and libbpf
doesn't even mark vmlinux BTF as required for freplace programs. So
trying to search anything in obj->vmlinux_btf might cause NULL
dereference if nothing else in BPF object requires vmlinux BTF.
Instead, error out if freplace (EXT) program doesn't specify
attach_prog_fd during at the load time.
Fixes: 91abb4a6d7 ("libbpf: Support attachment of BPF tracing programs to kernel modules")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220909193053.577111-3-andrii@kernel.org
This reverts commit 14e5ce7994 ("libbpf: Add GCC support for
bpf_tail_call_static"). Reason is that gcc invented their own BPF asm
which is not conform with LLVM one, and going forward this would be
more painful to maintain here and in other areas of the library. Thus
remove it; ask to gcc folks is to align with LLVM one to use exact
same syntax.
Fixes: 14e5ce7994 ("libbpf: Add GCC support for bpf_tail_call_static")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Jose E. Marchesi <jose.marchesi@oracle.com>
The offending commit removed mmap_per_thread(), which did not consider
the different set-output rules for per-thread mmaps i.e. in the per-thread
case set-output is used for file descriptors of the same thread not the
same cpu.
This was not immediately noticed because it only happens with
multi-threaded targets and we do not have a test for that yet.
Reinstate mmap_per_thread() expanding it to cover also system-wide per-cpu
events i.e. to continue to allow the mixing of per-thread and per-cpu
mmaps.
Debug messages (with -vv) show the file descriptors that are opened with
sys_perf_event_open. New debug messages are added (needs -vvv) that show
also which file descriptors are mmapped and which are redirected with
set-output.
In the per-cpu case (cpu != -1) file descriptors for the same CPU are
set-output to the first file descriptor for that CPU.
In the per-thread case (cpu == -1) file descriptors for the same thread are
set-output to the first file descriptor for that thread.
Example (process 17489 has 2 threads):
Before (but with new debug prints):
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
failed to mmap with 22 (Invalid argument)
After:
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: mmap_per_thread: nr cpu values (may include -1) 1 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 1: mmapping fd 6
<SNIP>
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (15 samples) ]
Per-cpu example (process 20341 has 2 threads, same as above):
$ perf record --no-bpf-event -vvv -p 20341
<SNIP>
sys_perf_event_open: pid 20341 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 20342 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 20341 cpu 1 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 20342 cpu 1 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid 20341 cpu 2 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 20342 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 20341 cpu 3 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 20342 cpu 3 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 20341 cpu 4 group_fd -1 flags 0x8 = 13
sys_perf_event_open: pid 20342 cpu 4 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 20341 cpu 5 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 20342 cpu 5 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 20341 cpu 6 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 20342 cpu 6 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 20341 cpu 7 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 20342 cpu 7 group_fd -1 flags 0x8 = 20
<SNIP>
libperf: mmap_per_cpu: nr cpu values 8 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
libperf: idx 1: mmapping fd 7
libperf: idx 1: set output fd 8 -> 7
libperf: idx 2: mmapping fd 9
libperf: idx 2: set output fd 10 -> 9
libperf: idx 3: mmapping fd 11
libperf: idx 3: set output fd 12 -> 11
libperf: idx 4: mmapping fd 13
libperf: idx 4: set output fd 14 -> 13
libperf: idx 5: mmapping fd 15
libperf: idx 5: set output fd 16 -> 15
libperf: idx 6: mmapping fd 17
libperf: idx 6: set output fd 18 -> 17
libperf: idx 7: mmapping fd 19
libperf: idx 7: set output fd 20 -> 19
<SNIP>
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (17 samples) ]
Fixes: ae4f8ae16a ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Reported-by: Tomáš Trnka <trnka@scm.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216441
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220905114209.8389-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support struct arguments in trampoline based programs,
existing BPF_PROG doesn't work any more since
the type size is needed to find whether a parameter
takes one or two registers. So this patch added a new
BPF_PROG2 macro to support such trampoline programs.
The idea is suggested by Andrii. For example, if the
to-be-traced function has signature like
typedef struct {
void *x;
int t;
} sockptr;
int blah(sockptr x, char y);
In the new BPF_PROG2 macro, the argument can be
represented as
__bpf_prog_call(
({ union {
struct { __u64 x, y; } ___z;
sockptr x;
} ___tmp = { .___z = { ctx[0], ctx[1] }};
___tmp.x;
}),
({ union {
struct { __u8 x; } ___z;
char y;
} ___tmp = { .___z = { ctx[2] }};
___tmp.y;
}));
In the above, the values stored on the stack are properly
assigned to the actual argument type value by using 'union'
magic. Note that the macro also works even if no arguments
are with struct types.
Note that new BPF_PROG2 works for both llvm16 and pre-llvm16
compilers where llvm16 supports bpf target passing value
with struct up to 16 byte size and pre-llvm16 will pass
by reference by storing values on the stack. With static functions
with struct argument as always inline, the compiler is able
to optimize and remove additional stack saving of struct values.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152707.2079473-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771d ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The bpf_tail_call_static function is currently not defined unless
using clang >= 8.
To support bpf_tail_call_static on GCC we can check if __clang__ is
not defined to enable bpf_tail_call_static.
We need to use GCC assembly syntax when the compiler does not define
__clang__ as LLVM inline assembly is not fully compatible with GCC.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220829210546.755377-1-james.hilliard1@gmail.com
This allows to have a better control over maps from the kernel when
preloading eBPF programs.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220824134055.1328882-8-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It checks a various combination of the read format settings and verify
it return the value in a proper position. The test uses task-clock
software events to guarantee it's always active and sets enabled/running
time.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_counts_values should be increased to read the new lost data.
Also adjust values after read according the read format.
This supports PERF_FORMAT_GROUP which has a different data format but
it's only available for leader events. Currently it doesn't have an API
to read sibling (member) events in the group. But users may read the
sibling event directly.
Also reading from mmap would be disabled when the read format has ID or
LOST bit as it's not exposed via mmap.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A mask encoding of a cpu map is laid out as:
u16 nr
u16 long_size
unsigned long mask[];
However, the mask may be 8-byte aligned meaning there is a 4-byte pad
after long_size. This means 32-bit and 64-bit builds see the mask as
being at different offsets. On top of this the structure is in the byte
data[] encoded as:
u16 type
char data[]
This means the mask's struct isn't the required 4 or 8 byte aligned, but
is offset by 2. Consequently the long reads and writes are causing
undefined behavior as the alignment is broken.
Fix the mask struct by creating explicit 32 and 64-bit variants, use a
union to avoid data[] and casts; the struct must be packed so the
layout matches the existing perf.data layout. Taking an address of a
member of a packed struct breaks alignment so pass the packed
perf_record_cpu_map_data to functions, so they can access variables with
the right alignment.
As the 64-bit version has 4 bytes of padding, optimizing writing to only
write the 32-bit version.
Committer notes:
Disable warnings about 'packed' that break the build in some arches like
riscv64, but just around that specific struct.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows max() to be used with 'const struct perf_cpu_maps *'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrii Nakryiko says:
====================
bpf-next 2022-08-17
We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).
The main changes are:
1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
Kanzenbach and Jesper Dangaard Brouer.
2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.
3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.
4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.
5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
unsupported names on old kernels, from Hangbin Liu.
6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
from Hao Luo.
7) Relax libbpf's requirement for shared libs to be marked executable, from
Henqgi Chen.
8) Improve bpf_iter internals handling of error returns, from Hao Luo.
9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.
10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.
11) bpftool improvements to handle full BPF program names better, from Manu
Bretelle.
12) bpftool fixes around libcap use, from Quentin Monnet.
13) BPF map internals clean ups and improvements around memory allocations,
from Yafang Shao.
14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
iterator to work on cgroupv1, from Yosry Ahmed.
15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.
16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
selftests/bpf: Few fixes for selftests/bpf built in release mode
libbpf: Clean up deprecated and legacy aliases
libbpf: Streamline bpf_attr and perf_event_attr initialization
libbpf: Fix potential NULL dereference when parsing ELF
selftests/bpf: Tests libbpf autoattach APIs
libbpf: Allows disabling auto attach
selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
selftests/bpf: Update CI kconfig
selftests/bpf: Add connmark read test
selftests/bpf: Add existing connection bpf_*_ct_lookup() test
bpftool: Clear errno after libcap's checks
bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
bpftool: Fix a typo in a comment
libbpf: Add names for auxiliary maps
bpf: Use bpf_map_area_alloc consistently on bpf map creation
bpf: Make __GFP_NOWARN consistent in bpf map creation
bpf: Use bpf_map_area_free instread of kvfree
bpf: Remove unneeded memset in queue_stack_map creation
libbpf: preserve errno across pr_warn/pr_info/pr_debug
...
====================
Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove three missed deprecated APIs that were aliased to new APIs:
bpf_object__unload, bpf_prog_attach_xattr and btf__load.
Also move legacy API libbpf_find_kernel_btf (aliased to
btf__load_vmlinux_btf) into libbpf_legacy.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-4-andrii@kernel.org
Make sure that entire libbpf code base is initializing bpf_attr and
perf_event_attr with memset(0). Also for bpf_attr make sure we
clear and pass to kernel only relevant parts of bpf_attr. bpf_attr is
a huge union of independent sub-command attributes, so there is no need
to clear and pass entire union bpf_attr, which over time grows quite
a lot and for most commands this growth is completely irrelevant.
Few cases where we were relying on compiler initialization of BPF UAPI
structs (like bpf_prog_info, bpf_map_info, etc) with `= {};` were
switched to memset(0) pattern for future-proofing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-3-andrii@kernel.org
Similar with commit 10b62d6a38 ("libbpf: Add names for auxiliary maps"),
let's make bpf_prog_load() also ignore name if kernel doesn't support
program name.
To achieve this, we need to call sys_bpf_prog_load() directly in
probe_kern_prog_name() to avoid circular dependency. sys_bpf_prog_load()
also need to be exported in the libbpf_internal.h file.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220813000936.6464-1-liuhangbin@gmail.com
The bpftool self-created maps can appear in final map show output due to
deferred removal in kernel. These maps don't have a name, which would make
users confused about where it comes from.
With a libbpf_ prefix name, users could know who created these maps.
It also could make some tests (like test_offload.py, which skip base maps
without names as a workaround) filter them out.
Kernel adds bpf prog/map name support in the same merge
commit fadad670a8 ("Merge branch 'bpf-extend-info'"). So we can also use
kernel_supports(NULL, FEAT_PROG_NAME) to check if kernel supports map name.
As discussed [1], Let's make bpf_map_create accept non-null
name string, and silently ignore the name if kernel doesn't support.
[1] https://lore.kernel.org/bpf/CAEf4BzYL1TQwo1231s83pjTdFPk9XWWhfZC5=KzkU-VO0k=0Ug@mail.gmail.com/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220811034020.529685-1-liuhangbin@gmail.com
A little longer PR than usual but it's all fixes, no late features.
It's long partially because of timing, and partially because of
follow ups to stuff that got merged a week or so before the merge
window and wasn't as widely tested. Maybe the Bluetooth fixes are
a little alarming so we'll address that, but the rest seems okay
and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your
WiFi warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being
able to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps
some devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking
which may lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role
is not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index
(to silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=C5Ck
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning"
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
As suggested in [0], make sure that libbpf_print saves and restored
errno and as such guaranteed that no matter what actual print callback
user installs, macros like pr_warn/pr_info/pr_debug are completely
transparent as far as errno goes.
While libbpf code is pretty careful about not clobbering important errno
values accidentally with pr_warn(), it's a trivial change to make sure
that pr_warn can be used anywhere without a risk of clobbering errno.
No functional changes, just future proofing.
[0] https://github.com/libbpf/libbpf/pull/536
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/r/20220810183425.1998735-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier cannot perform sufficient validation of bpf_attr->test.ctx_in
pointer, therefore bpf programs should not be allowed to call BPF_PROG_RUN
command from within the program.
To fix this issue split bpf_sys_bpf() bpf helper into normal kern_sys_bpf()
kernel function that can only be used by the kernel light skeleton directly.
Reported-by: YiFei Zhu <zhuyifei@google.com>
Fixes: b1d18a7574 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, resolve_full_path() requires executable permission for both
programs and shared libraries. This causes failures on distos like Debian
since the shared libraries are not installed executable and Linux is not
requiring shared libraries to have executable permissions. Let's remove
executable permission check for shared libraries.
Reported-by: Goro Fuji <goro@fastly.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220806102021.3867130-1-hengqi.chen@gmail.com
Add explicit error message if BPF object file is still using legacy BPF
map definitions in SEC("maps"). Before this change, if BPF object file
is still using legacy map definition user will see a bit confusing:
libbpf: elf: skipping unrecognized data section(4) maps
libbpf: prog 'handler': bad map relo against 'server_map' in section 'maps'
Now libbpf will be explicit about rejecting "maps" ELF section:
libbpf: elf: legacy map definitions in 'maps' section are not supported by libbpf v1.0+
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220803214202.23750-1-andrii@kernel.org
This branch consists of:
Qu Wenruo:
lib: bitmap: fix the duplicated comments on bitmap_to_arr64()
https://lore.kernel.org/lkml/0d85e1dbad52ad7fb5787c4432bdb36cbd24f632.1656063005.git.wqu@suse.com/
Alexander Lobakin:
bitops: let optimize out non-atomic bitops on compile-time constants
https://lore.kernel.org/lkml/20220624121313.2382500-1-alexandr.lobakin@intel.com/T/
Yury Norov:
lib: cleanup bitmap-related headers
https://lore.kernel.org/linux-arm-kernel/YtCVeOGLiQ4gNPSf@yury-laptop/T/#m305522194c4d38edfdaffa71fcaaf2e2ca00a961
Alexander Lobakin:
x86/olpc: fix 'logical not is only applied to the left hand side'
https://www.spinics.net/lists/kernel/msg4440064.html
Yury Norov:
lib/nodemask: inline wrappers around bitmap
https://lore.kernel.org/all/20220723214537.2054208-1-yury.norov@gmail.com/
-----BEGIN PGP SIGNATURE-----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=4dTW
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.0-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
- Introduce 'perf lock contention' subtool, using new lock contention
tracepoints and using BPF for in kernel aggregation and then userspace
processing using the perf tooling infrastructure for resolving symbols, target
specification, etc.
Since the new lock contention tracepoints don't provide lock names, get up to
8 stack traces and display the first non-lock function symbol name as a caller:
$ perf lock report -F acquired,contended,avg_wait,wait_total
Name acquired contended avg wait total wait
update_blocked_a... 40 40 3.61 us 144.45 us
kernfs_fop_open+... 5 5 3.64 us 18.18 us
_nohz_idle_balance 3 3 2.65 us 7.95 us
tick_do_update_j... 1 1 6.04 us 6.04 us
ep_scan_ready_list 1 1 3.93 us 3.93 us
Supports the usual 'perf record' + 'perf report' workflow as well as a
BCC/bpftrace like mode where you start the tool and then press control+C to get
results:
$ sudo perf lock contention -b
^C
contended total wait max wait avg wait type caller
42 192.67 us 13.64 us 4.59 us spinlock queue_work_on+0x20
23 85.54 us 10.28 us 3.72 us spinlock worker_thread+0x14a
6 13.92 us 6.51 us 2.32 us mutex kernfs_iop_permission+0x30
3 11.59 us 10.04 us 3.86 us mutex kernfs_dop_revalidate+0x3c
1 7.52 us 7.52 us 7.52 us spinlock kthread+0x115
1 7.24 us 7.24 us 7.24 us rwlock:W sys_epoll_wait+0x148
2 7.08 us 3.99 us 3.54 us spinlock delayed_work_timer_fn+0x1b
1 6.41 us 6.41 us 6.41 us spinlock idle_balance+0xa06
2 2.50 us 1.83 us 1.25 us mutex kernfs_iop_lookup+0x2f
1 1.71 us 1.71 us 1.71 us mutex kernfs_iop_getattr+0x2c
...
- Add new 'perf kwork' tool to trace time properties of kernel work (such as
softirq, and workqueue), uses eBPF skeletons to collect info in kernel space,
aggregating data that then gets processed by the userspace tool, e.g.:
# perf kwork report
Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end |
----------------------------------------------------------------------------------------------------
nvme0q5:130 | 004 | 1.101 ms | 49 | 0.051 ms | 26035.056403 s | 26035.056455 s |
amdgpu:162 | 002 | 0.176 ms | 9 | 0.046 ms | 26035.268020 s | 26035.268066 s |
nvme0q24:149 | 023 | 0.161 ms | 55 | 0.009 ms | 26035.655280 s | 26035.655288 s |
nvme0q20:145 | 019 | 0.090 ms | 33 | 0.014 ms | 26035.939018 s | 26035.939032 s |
nvme0q31:156 | 030 | 0.075 ms | 21 | 0.010 ms | 26035.052237 s | 26035.052247 s |
nvme0q8:133 | 007 | 0.062 ms | 12 | 0.021 ms | 26035.416840 s | 26035.416861 s |
nvme0q6:131 | 005 | 0.054 ms | 22 | 0.010 ms | 26035.199919 s | 26035.199929 s |
nvme0q19:144 | 018 | 0.052 ms | 14 | 0.010 ms | 26035.110615 s | 26035.110625 s |
nvme0q7:132 | 006 | 0.049 ms | 13 | 0.007 ms | 26035.125180 s | 26035.125187 s |
nvme0q18:143 | 017 | 0.033 ms | 14 | 0.007 ms | 26035.169698 s | 26035.169705 s |
nvme0q17:142 | 016 | 0.013 ms | 1 | 0.013 ms | 26035.565147 s | 26035.565160 s |
enp5s0-rx-0:164 | 006 | 0.004 ms | 4 | 0.002 ms | 26035.928882 s | 26035.928884 s |
enp5s0-tx-0:166 | 008 | 0.003 ms | 3 | 0.002 ms | 26035.870923 s | 26035.870925 s |
--------------------------------------------------------------------------------------------------------
See commit log messages for more examples with extra options to limit the events time window, etc.
- Add support for new AMD IBS (Instruction Based Sampling) features:
With the DataSrc extensions, the source of data can be decoded among:
- Local L3 or other L1/L2 in CCX.
- A peer cache in a near CCX.
- Data returned from DRAM.
- A peer cache in a far CCX.
- DRAM address map with "long latency" bit set.
- Data returned from MMIO/Config/PCI/APIC.
- Extension Memory (S-Link, GenZ, etc - identified by the CS target
and/or address map at DF's choice).
- Peer Agent Memory.
- Support hardware tracing with Intel PT on guest machines, combining the
traces with the ones in the host machine.
- Add a "-m" option to 'perf buildid-list' to show kernel and modules
build-ids, to display all of the information needed to do external
symbolization of kernel stack traces, such as those collected by
bpf_get_stackid().
- Add arch TSC frequency information to perf.data file headers.
- Handle changes in the binutils disassembler function signatures in
perf, bpftool and bpf_jit_disasm (Acked by the bpftool maintainer).
- Fix building the perf perl binding with the newest gcc in distros such
as fedora rawhide, where some new warnings were breaking the build as
perf uses -Werror.
- Add 'perf test' entry for branch stack sampling.
- Add ARM SPE system wide 'perf test' entry.
- Add user space counter reading tests to 'perf test'.
- Build with python3 by default, if available.
- Add python converter script for the vendor JSON event files.
- Update vendor JSON files for alderlake, bonnell, broadwell, broadwellde,
broadwellx, cascadelakex, elkhartlake, goldmont, goldmontplus, haswell,
haswellx, icelake, icelakex, ivybridge, ivytown, jaketown, knightslanding,
nehalemep, nehalemex, sandybridge, sapphirerapids, silvermont, skylake,
skylakex, snowridgex, tigerlake, westmereep-dp, westmereep-sp and westmereex.
- Add vendor JSON File for Intel meteorlake.
- Add Arm Cortex-A78C and X1C JSON vendor event files.
- Add workaround to symbol address reading from ELF files without phdr,
falling back to the previoous equation.
- Convert legacy map definition to BTF-defined in the perf BPF script test.
- Rework prologue generation code to stop using libbpf deprecated APIs.
- Add default hybrid events for 'perf stat' on x86.
- Add topdown metrics in the default 'perf stat' on the hybrid machines (big/little cores).
- Prefer sampled CPU when exporting JSON in 'perf data convert'
- Fix ('perf stat CSV output linter') and ("Check branch stack sampling") 'perf test' entries on s390.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYuw6gwAKCRCyPKLppCJ+
J5+iAP0RL6sKMhzdkRjRYfG8CluJ401YaPHadzv5jxP8gOZz2gEAsuYDrMF9t1zB
4DqORfobdX9UQEJjP9oRltU73GM0swI=
=2/M0
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.0-2022-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf lock contention' subtool, using new lock contention
tracepoints and using BPF for in kernel aggregation and then
userspace processing using the perf tooling infrastructure for
resolving symbols, target specification, etc.
Since the new lock contention tracepoints don't provide lock names,
get up to 8 stack traces and display the first non-lock function
symbol name as a caller:
$ perf lock report -F acquired,contended,avg_wait,wait_total
Name acquired contended avg wait total wait
update_blocked_a... 40 40 3.61 us 144.45 us
kernfs_fop_open+... 5 5 3.64 us 18.18 us
_nohz_idle_balance 3 3 2.65 us 7.95 us
tick_do_update_j... 1 1 6.04 us 6.04 us
ep_scan_ready_list 1 1 3.93 us 3.93 us
Supports the usual 'perf record' + 'perf report' workflow as well as
a BCC/bpftrace like mode where you start the tool and then press
control+C to get results:
$ sudo perf lock contention -b
^C
contended total wait max wait avg wait type caller
42 192.67 us 13.64 us 4.59 us spinlock queue_work_on+0x20
23 85.54 us 10.28 us 3.72 us spinlock worker_thread+0x14a
6 13.92 us 6.51 us 2.32 us mutex kernfs_iop_permission+0x30
3 11.59 us 10.04 us 3.86 us mutex kernfs_dop_revalidate+0x3c
1 7.52 us 7.52 us 7.52 us spinlock kthread+0x115
1 7.24 us 7.24 us 7.24 us rwlock:W sys_epoll_wait+0x148
2 7.08 us 3.99 us 3.54 us spinlock delayed_work_timer_fn+0x1b
1 6.41 us 6.41 us 6.41 us spinlock idle_balance+0xa06
2 2.50 us 1.83 us 1.25 us mutex kernfs_iop_lookup+0x2f
1 1.71 us 1.71 us 1.71 us mutex kernfs_iop_getattr+0x2c
...
- Add new 'perf kwork' tool to trace time properties of kernel work
(such as softirq, and workqueue), uses eBPF skeletons to collect info
in kernel space, aggregating data that then gets processed by the
userspace tool, e.g.:
# perf kwork report
Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end |
----------------------------------------------------------------------------------------------------
nvme0q5:130 | 004 | 1.101 ms | 49 | 0.051 ms | 26035.056403 s | 26035.056455 s |
amdgpu:162 | 002 | 0.176 ms | 9 | 0.046 ms | 26035.268020 s | 26035.268066 s |
nvme0q24:149 | 023 | 0.161 ms | 55 | 0.009 ms | 26035.655280 s | 26035.655288 s |
nvme0q20:145 | 019 | 0.090 ms | 33 | 0.014 ms | 26035.939018 s | 26035.939032 s |
nvme0q31:156 | 030 | 0.075 ms | 21 | 0.010 ms | 26035.052237 s | 26035.052247 s |
nvme0q8:133 | 007 | 0.062 ms | 12 | 0.021 ms | 26035.416840 s | 26035.416861 s |
nvme0q6:131 | 005 | 0.054 ms | 22 | 0.010 ms | 26035.199919 s | 26035.199929 s |
nvme0q19:144 | 018 | 0.052 ms | 14 | 0.010 ms | 26035.110615 s | 26035.110625 s |
nvme0q7:132 | 006 | 0.049 ms | 13 | 0.007 ms | 26035.125180 s | 26035.125187 s |
nvme0q18:143 | 017 | 0.033 ms | 14 | 0.007 ms | 26035.169698 s | 26035.169705 s |
nvme0q17:142 | 016 | 0.013 ms | 1 | 0.013 ms | 26035.565147 s | 26035.565160 s |
enp5s0-rx-0:164 | 006 | 0.004 ms | 4 | 0.002 ms | 26035.928882 s | 26035.928884 s |
enp5s0-tx-0:166 | 008 | 0.003 ms | 3 | 0.002 ms | 26035.870923 s | 26035.870925 s |
--------------------------------------------------------------------------------------------------------
See commit log messages for more examples with extra options to limit
the events time window, etc.
- Add support for new AMD IBS (Instruction Based Sampling) features:
With the DataSrc extensions, the source of data can be decoded among:
- Local L3 or other L1/L2 in CCX.
- A peer cache in a near CCX.
- Data returned from DRAM.
- A peer cache in a far CCX.
- DRAM address map with "long latency" bit set.
- Data returned from MMIO/Config/PCI/APIC.
- Extension Memory (S-Link, GenZ, etc - identified by the CS target
and/or address map at DF's choice).
- Peer Agent Memory.
- Support hardware tracing with Intel PT on guest machines, combining
the traces with the ones in the host machine.
- Add a "-m" option to 'perf buildid-list' to show kernel and modules
build-ids, to display all of the information needed to do external
symbolization of kernel stack traces, such as those collected by
bpf_get_stackid().
- Add arch TSC frequency information to perf.data file headers.
- Handle changes in the binutils disassembler function signatures in
perf, bpftool and bpf_jit_disasm (Acked by the bpftool maintainer).
- Fix building the perf perl binding with the newest gcc in distros
such as fedora rawhide, where some new warnings were breaking the
build as perf uses -Werror.
- Add 'perf test' entry for branch stack sampling.
- Add ARM SPE system wide 'perf test' entry.
- Add user space counter reading tests to 'perf test'.
- Build with python3 by default, if available.
- Add python converter script for the vendor JSON event files.
- Update vendor JSON files for most Intel cores.
- Add vendor JSON File for Intel meteorlake.
- Add Arm Cortex-A78C and X1C JSON vendor event files.
- Add workaround to symbol address reading from ELF files without phdr,
falling back to the previoous equation.
- Convert legacy map definition to BTF-defined in the perf BPF script
test.
- Rework prologue generation code to stop using libbpf deprecated APIs.
- Add default hybrid events for 'perf stat' on x86.
- Add topdown metrics in the default 'perf stat' on the hybrid machines
(big/little cores).
- Prefer sampled CPU when exporting JSON in 'perf data convert'
- Fix ('perf stat CSV output linter') and ("Check branch stack
sampling") 'perf test' entries on s390.
* tag 'perf-tools-for-v6.0-2022-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
perf stat: Refactor __run_perf_stat() common code
perf lock: Print the number of lost entries for BPF
perf lock: Add --map-nr-entries option
perf lock: Introduce struct lock_contention
perf scripting python: Do not build fail on deprecation warnings
genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTO
perf build: Suppress openssl v3 deprecation warnings in libcrypto feature test
perf parse-events: Break out tracepoint and printing
perf parse-events: Don't #define YY_EXTRA_TYPE
tools bpftool: Don't display disassembler-four-args feature test
tools bpftool: Fix compilation error with new binutils
tools bpf_jit_disasm: Don't display disassembler-four-args feature test
tools bpf_jit_disasm: Fix compilation error with new binutils
tools perf: Fix compilation error with new binutils
tools include: add dis-asm-compat.h to handle version differences
tools build: Don't display disassembler-four-args feature test
tools build: Add feature test for init_disassemble_info API changes
perf test: Add ARM SPE system wide test
perf tools: Rework prologue generation code
perf bpf: Convert legacy map definition to BTF-defined
...
GCC expects the always_inline attribute to only be set on inline
functions, as such we should make all functions with this attribute
use the __always_inline macro which makes the function inline and
sets the attribute.
Fixes errors like:
/home/buildroot/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf_tracing.h:439:1: error: ‘always_inline’ function might not be inlinable [-Werror=attributes]
439 | ____##name(unsigned long long *ctx, ##args)
| ^~~~
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220803151403.793024-1-james.hilliard1@gmail.com
The GNU assembler generates an empty .bss section. This is a well
established behavior in GAS that happens in all supported targets.
The LLVM assembler doesn't generate an empty .bss section.
bpftool chokes on the empty .bss section.
Additionally in bpf_object__elf_collect the sec_desc->data is not
initialized when a section is not recognized. In this case, this
happens with .comment.
So we must check that sec_desc->data is initialized before checking
if the size is 0.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220731232649.4668-1-james.hilliard1@gmail.com
Add an extensible variant of bpf_obj_get() capable of setting the
`file_flags` parameter.
This parameter is needed to enable unprivileged access to BPF maps.
Without a method like this, users must manually make the syscall.
Signed-off-by: Joe Burton <jevburton@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729202727.3311806-1-jevburton.kernel@gmail.com
Commit 708ac5bea0 ("libbpf: add ksyscall/kretsyscall sections support
for syscall kprobes") added the arch_specific_syscall_pfx() function,
which returns a string representing the architecture in use. As it turns
out this function is currently not aware of Power PC, where NULL is
returned. That's being flagged by the libbpf CI system, which builds for
ppc64le and the compiler sees a NULL pointer being passed in to a %s
format string.
With this change we add representations for two more architectures, for
Power PC and Power PC 64, and also adjust the string format logic to
handle NULL pointers gracefully, in an attempt to prevent similar issues
with other architectures in the future.
Fixes: 708ac5bea0 ("libbpf: add ksyscall/kretsyscall sections support for syscall kprobes")
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220728222345.3125975-1-deso@posteo.net
Explicitly list known quirks. Mention that socket-related syscalls can be
invoked via socketcall().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220726134008.256968-2-iii@linux.ibm.com
The return from strcmp() is inverted so it wrongly returns true instead
of false and vice versa.
Fixes: a1c9d61b19 ("libbpf: Improve library identification for uprobe binary path resolution")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/YtZ+/dAA195d99ak@kili
The code here is supposed to take a signed int and store it in a signed
long long. Unfortunately, the way that the type promotion works with
this conditional statement is that it takes a signed int, type promotes
it to a __u32, and then stores that as a signed long long. The result is
never negative.
This is from static analysis, but I made a little test program just to
test it before I sent the patch:
#include <stdio.h>
int main(void)
{
unsigned long long src = -1ULL;
signed long long dst1, dst2;
int is_signed = 1;
dst1 = is_signed ? *(int *)&src : *(unsigned int *)0;
dst2 = is_signed ? (signed long long)*(int *)&src : *(unsigned int *)0;
printf("%lld\n", dst1);
printf("%lld\n", dst2);
return 0;
}
Fixes: d90ec262b3 ("libbpf: Add enum64 support for btf_dump")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/YtZ+LpgPADm7BeEd@kili
Add machine_pid and vcpu to struct perf_record_auxtrace_error. The existing
fmt member is used to identify the new format.
The new members make it possible to easily differentiate errors from guest
machines.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/20220711093218.10967-18-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When injecting events from a guest perf.data file, the events will have
separate sample ID numbers. These ID numbers can then be used to determine
which machine an event belongs to. To facilitate that, add machine_pid and
vcpu to id_index records. For backward compatibility, these are added at
the end of the record, and the length of the record is used to determine
if they are present or not.
Note, this is needed because the events from a guest perf.data file contain
the pid/tid of the process running at that time inside the VM not the
pid/tid of the (QEMU) hypervisor thread. So a way is needed to relate
guest events back to the guest machine and VCPU, and using sample ID
numbers for that is relatively simple and convenient.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/20220711093218.10967-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The snprintf() function returns the number of bytes it *would* have
copied if there were enough space. So it can return > the
sizeof(gen->attach_target).
Fixes: 6723474373 ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/YtZ+oAySqIhFl6/J@kili
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make libbpf adjust RINGBUF map size (rounding it up to closest power-of-2
of page_size) more eagerly: during open phase when initializing the map
and on explicit calls to bpf_map__set_max_entries().
Such approach allows user to check actual size of BPF ringbuf even
before it's created in the kernel, but also it prevents various edge
case scenarios where BPF ringbuf size can get out of sync with what it
would be in kernel. One of them (reported in [0]) is during an attempt
to pin/reuse BPF ringbuf.
Move adjust_ringbuf_sz() helper closer to its first actual use. The
implementation of the helper is unchanged.
Also make detection of whether bpf_object is already loaded more robust
by checking obj->loaded explicitly, given that map->fd can be < 0 even
if bpf_object is already loaded due to ability to disable map creation
with bpf_map__set_autocreate(map, false).
[0] Closes: https://github.com/libbpf/libbpf/pull/530
Fixes: 0087a681fa ("libbpf: Automatically fix up BPF_MAP_TYPE_RINGBUF size, if necessary")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220715230952.2219271-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add SEC("ksyscall")/SEC("ksyscall/<syscall_name>") and corresponding
kretsyscall variants (for return kprobes) to allow users to kprobe
syscall functions in kernel. These special sections allow to ignore
complexities and differences between kernel versions and host
architectures when it comes to syscall wrapper and corresponding
__<arch>_sys_<syscall> vs __se_sys_<syscall> differences, depending on
whether host kernel has CONFIG_ARCH_HAS_SYSCALL_WRAPPER (though libbpf
itself doesn't rely on /proc/config.gz for detecting this, see
BPF_KSYSCALL patch for how it's done internally).
Combined with the use of BPF_KSYSCALL() macro, this allows to just
specify intended syscall name and expected input arguments and leave
dealing with all the variations to libbpf.
In addition to SEC("ksyscall+") and SEC("kretsyscall+") add
bpf_program__attach_ksyscall() API which allows to specify syscall name
at runtime and provide associated BPF cookie value.
At the moment SEC("ksyscall") and bpf_program__attach_ksyscall() do not
handle all the calling convention quirks for mmap(), clone() and compat
syscalls. It also only attaches to "native" syscall interfaces. If host
system supports compat syscalls or defines 32-bit syscalls in 64-bit
kernel, such syscall interfaces won't be attached to by libbpf.
These limitations may or may not change in the future. Therefore it is
recommended to use SEC("kprobe") for these syscalls or if working with
compat and 32-bit interfaces is required.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Improve BPF_KPROBE_SYSCALL (and rename it to shorter BPF_KSYSCALL to
match libbpf's SEC("ksyscall") section name, added in next patch) to use
__kconfig variable to determine how to properly fetch syscall arguments.
Instead of relying on hard-coded knowledge of whether kernel's
architecture uses syscall wrapper or not (which only reflects the latest
kernel versions, but is not necessarily true for older kernels and won't
necessarily hold for later kernel versions on some particular host
architecture), determine this at runtime by attempting to create
perf_event (with fallback to kprobe event creation through tracefs on
legacy kernels, just like kprobe attachment code is doing) for kernel
function that would correspond to bpf() syscall on a system that has
CONFIG_ARCH_HAS_SYSCALL_WRAPPER set (e.g., for x86-64 it would try
'__x64_sys_bpf').
If host kernel uses syscall wrapper, syscall kernel function's first
argument is a pointer to struct pt_regs that then contains syscall
arguments. In such case we need to use bpf_probe_read_kernel() to fetch
actual arguments (which we do through BPF_CORE_READ() macro) from inner
pt_regs.
But if the kernel doesn't use syscall wrapper approach, input
arguments can be read from struct pt_regs directly with no probe reading.
All this feature detection is done without requiring /proc/config.gz
existence and parsing, and BPF-side helper code uses newly added
LINUX_HAS_SYSCALL_WRAPPER virtual __kconfig extern to keep in sync with
user-side feature detection of libbpf.
BPF_KSYSCALL() macro can be used both with SEC("kprobe") programs that
define syscall function explicitly (e.g., SEC("kprobe/__x64_sys_bpf"))
and SEC("ksyscall") program added in the next patch (which are the same
kprobe program with added benefit of libbpf determining correct kernel
function name automatically).
Kretprobe and kretsyscall (added in next patch) programs don't need
BPF_KSYSCALL as they don't provide access to input arguments. Normal
BPF_KRETPROBE is completely sufficient and is recommended.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Libbpf supports single virtual __kconfig extern currently: LINUX_KERNEL_VERSION.
LINUX_KERNEL_VERSION isn't coming from /proc/kconfig.gz and is intead
customly filled out by libbpf.
This patch generalizes this approach to support more such virtual
__kconfig externs. One such extern added in this patch is
LINUX_HAS_BPF_COOKIE which is used for BPF-side USDT supporting code in
usdt.bpf.h instead of using CO-RE-based enum detection approach for
detecting bpf_get_attach_cookie() BPF helper. This allows to remove
otherwise not needed CO-RE dependency and keeps user-space and BPF-side
parts of libbpf's USDT support strictly in sync in terms of their
feature detection.
We'll use similar approach for syscall wrapper detection for
BPF_KSYSCALL() BPF-side macro in follow up patch.
Generally, currently libbpf reserves CONFIG_ prefix for Kconfig values
and LINUX_ for virtual libbpf-backed externs. In the future we might
extend the set of prefixes that are supported. This can be done without
any breaking changes, as currently any __kconfig extern with
unrecognized name is rejected.
For LINUX_xxx externs we support the normal "weak rule": if libbpf
doesn't recognize given LINUX_xxx extern but such extern is marked as
__weak, it is not rejected and defaults to zero. This follows
CONFIG_xxx handling logic and will allow BPF applications to
opportunistically use newer libbpf virtual externs without breaking on
older libbpf versions unnecessarily.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for writing a custom event reader, by exposing the ring
buffer.
With the new API perf_buffer__buffer() you will get access to the
raw mmaped()'ed per-cpu underlying memory of the ring buffer.
This region contains both the perf buffer data and header
(struct perf_event_mmap_page), which manages the ring buffer
state (head/tail positions, when accessing the head/tail position
it's important to take into consideration SMP).
With this type of low level access one can implement different types of
consumers here are few simple examples where this API helps with:
1. perf_event_read_simple is allocating using malloc, perhaps you want
to handle the wrap-around in some other way.
2. Since perf buf is per-cpu then the order of the events is not
guarnteed, for example:
Given 3 events where each event has a timestamp t0 < t1 < t2,
and the events are spread on more than 1 CPU, then we can end
up with the following state in the ring buf:
CPU[0] => [t0, t2]
CPU[1] => [t1]
When you consume the events from CPU[0], you could know there is
a t1 missing, (assuming there are no drops, and your event data
contains a sequential index).
So now one can simply do the following, for CPU[0], you can store
the address of t0 and t2 in an array (without moving the tail, so
there data is not perished) then move on the CPU[1] and set the
address of t1 in the same array.
So you end up with something like:
void **arr[] = [&t0, &t1, &t2], now you can consume it orderely
and move the tails as you process in order.
3. Assuming there are multiple CPUs and we want to start draining the
messages from them, then we can "pick" with which one to start with
according to the remaining free space in the ring buffer.
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220715181122.149224-1-arilou@gmail.com
bitmap_weight() doesn't return negative values, so change it's type
to unsigned long. It may help compiler to generate better code and
catch bugs.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Some bitmap functions return boolean results in int variables. Fix it
by changing return types to bool.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
BPF map name is limited to BPF_OBJ_NAME_LEN.
A map name is defined as being longer than BPF_OBJ_NAME_LEN,
it will be truncated to BPF_OBJ_NAME_LEN when a userspace program
calls libbpf to create the map. A pinned map also generates a path
in the /sys. If the previous program wanted to reuse the map，
it can not get bpf_map by name, because the name of the map is only
partially the same as the name which get from pinned path.
The syscall information below show that map name "process_pinned_map"
is truncated to "process_pinned_".
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/process_pinned_map",
bpf_fd=0, file_flags=0}, 144) = -1 ENOENT (No such file or directory)
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4,
value_size=4,max_entries=1024, map_flags=0, inner_map_fd=0,
map_name="process_pinned_",map_ifindex=0, btf_fd=3, btf_key_type_id=6,
btf_value_type_id=10,btf_vmlinux_value_type_id=0}, 72) = 4
This patch check that if the name of pinned map are the same as the
actual name for the first (BPF_OBJ_NAME_LEN - 1),
bpf map still uses the name which is included in bpf object.
Fixes: 26736eb9a4 ("tools: libbpf: allow map reuse")
Signed-off-by: Anquan Wu <leiqi96@hotmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/OSZP286MB1725CEA1C95C5CB8E7CCC53FB8869@OSZP286MB1725.JPNP286.PROD.OUTLOOK.COM
binary_path is a required non-null parameter for bpf_program__attach_usdt
and bpf_program__attach_uprobe_opts. Check it against NULL to prevent
coredump on strchr.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220712025745.2703995-1-hengqi.chen@gmail.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-07-09
We've added 94 non-merge commits during the last 19 day(s) which contain
a total of 125 files changed, 5141 insertions(+), 6701 deletions(-).
The main changes are:
1) Add new way for performing BTF type queries to BPF, from Daniel Müller.
2) Add inlining of calls to bpf_loop() helper when its function callback is
statically known, from Eduard Zingerman.
3) Implement BPF TCP CC framework usability improvements, from Jörn-Thorben Hinz.
4) Add LSM flavor for attaching per-cgroup BPF programs to existing LSM
hooks, from Stanislav Fomichev.
5) Remove all deprecated libbpf APIs in prep for 1.0 release, from Andrii Nakryiko.
6) Add benchmarks around local_storage to BPF selftests, from Dave Marchevsky.
7) AF_XDP sample removal (given move to libxdp) and various improvements around AF_XDP
selftests, from Magnus Karlsson & Maciej Fijalkowski.
8) Add bpftool improvements for memcg probing and bash completion, from Quentin Monnet.
9) Add arm64 JIT support for BPF-2-BPF coupled with tail calls, from Jakub Sitnicki.
10) Sockmap optimizations around throughput of UDP transmissions which have been
improved by 61%, from Cong Wang.
11) Rework perf's BPF prologue code to remove deprecated functions, from Jiri Olsa.
12) Fix sockmap teardown path to avoid sleepable sk_psock_stop, from John Fastabend.
13) Fix libbpf's cleanup around legacy kprobe/uprobe on error case, from Chuang Wang.
14) Fix libbpf's bpf_helpers.h to work with gcc for the case of its sec/pragma
macro, from James Hilliard.
15) Fix libbpf's pt_regs macros for riscv to use a0 for RC register, from Yixun Lan.
16) Fix bpftool to show the name of type BPF_OBJ_LINK, from Yafang Shao.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (94 commits)
selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n
bpf: Correctly propagate errors up from bpf_core_composites_match
libbpf: Disable SEC pragma macro on GCC
bpf: Check attach_func_proto more carefully in check_return_code
selftests/bpf: Add test involving restrict type qualifier
bpftool: Add support for KIND_RESTRICT to gen min_core_btf command
MAINTAINERS: Add entry for AF_XDP selftests files
selftests, xsk: Rename AF_XDP testing app
bpf, docs: Remove deprecated xsk libbpf APIs description
selftests/bpf: Add benchmark for local_storage RCU Tasks Trace usage
libbpf, riscv: Use a0 for RC register
libbpf: Remove unnecessary usdt_rel_ip assignments
selftests/bpf: Fix few more compiler warnings
selftests/bpf: Fix bogus uninitialized variable warning
bpftool: Remove zlib feature test from Makefile
libbpf: Cleanup the legacy uprobe_event on failed add/attach_event()
libbpf: Fix wrong variable used in perf_event_uprobe_open_legacy()
libbpf: Cleanup the legacy kprobe_event on failed add/attach_event()
selftests/bpf: Add type match test against kernel's task_struct
selftests/bpf: Add nested type to type based tests
...
====================
Link: https://lore.kernel.org/r/20220708233145.32365-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change addresses a comment made earlier [0] about a missing return
of an error when __bpf_core_types_match is invoked from
bpf_core_composites_match, which could have let to us erroneously
ignoring errors.
Regarding the typedef name check pointed out in the same context, it is
not actually an issue, because callers of the function perform a name
check for the root type anyway. To make that more obvious, let's add
comments to the function (similar to what we have for
bpf_core_types_are_compat, which is called in pretty much the same
context).
[0]: https://lore.kernel.org/bpf/165708121449.4919.13204634393477172905.git-patchwork-notify@kernel.org/T/#m55141e8f8cfd2e8d97e65328fa04852870d01af6
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220707211931.3415440-1-deso@posteo.net
According to the RISC-V calling convention register usage here [0], a0
is used as return value register, so rename it to make it consistent
with the spec.
[0] section 18.2, table 18.2
https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
Fixes: 589fed479b ("riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h")
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Amjad OULED-AMEUR <ouledameur.amjad@gmail.com>
Link: https://lore.kernel.org/bpf/20220706140204.47926-1-dlan@gentoo.org
Coverity detected that usdt_rel_ip is unconditionally overwritten
anyways, so there is no need to unnecessarily initialize it with unused
value. Clean this up.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220705224818.4026623-4-andrii@kernel.org
A potential scenario, when an error is returned after
add_uprobe_event_legacy() in perf_event_uprobe_open_legacy(), or
bpf_program__attach_perf_event_opts() in
bpf_program__attach_uprobe_opts() returns an error, the uprobe_event
that was previously created is not cleaned.
So, with this patch, when an error is returned, fix this by adding
remove_uprobe_event_legacy()
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220629151848.65587-4-nashuiliang@gmail.com
Before the 0bc11ed5ab commit ("kprobes: Allow kprobes coexist with
livepatch"), in a scenario where livepatch and kprobe coexist on the
same function entry, the creation of kprobe_event using
add_kprobe_event_legacy() will be successful, at the same time as a
trace event (e.g. /debugfs/tracing/events/kprobe/XXX) will exist, but
perf_event_open() will return an error because both livepatch and kprobe
use FTRACE_OPS_FL_IPMODIFY. As follows:
1) add a livepatch
$ insmod livepatch-XXX.ko
2) add a kprobe using tracefs API (i.e. add_kprobe_event_legacy)
$ echo 'p:mykprobe XXX' > /sys/kernel/debug/tracing/kprobe_events
3) enable this kprobe (i.e. sys_perf_event_open)
This will return an error, -EBUSY.
On Andrii Nakryiko's comment, few error paths in
bpf_program__attach_kprobe_opts() that should need to call
remove_kprobe_event_legacy().
With this patch, whenever an error is returned after
add_kprobe_event_legacy() or bpf_program__attach_perf_event_opts(), this
ensures that the created kprobe_event is cleaned.
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Jingren Zhou <zhoujingren@didiglobal.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220629151848.65587-2-nashuiliang@gmail.com
This patch finalizes support for the proposed type match relation in libbpf by
adding bpf_core_type_matches() macro which emits TYPE_MATCH relocation.
Clang support for this relocation was added in [0].
[0] https://reviews.llvm.org/D126838
Signed-off-by: Daniel Müller <deso@posteo.net>¬
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>¬
Link: https://lore.kernel.org/bpf/20220628160127.607834-7-deso@posteo.net¬
This patch adds support for the proposed type match relation to
relo_core where it is shared between userspace and kernel. It plumbs
through both kernel-side and libbpf-side support.
The matching relation is defined as follows (copy from source):
- modifiers and typedefs are stripped (and, hence, effectively ignored)
- generally speaking types need to be of same kind (struct vs. struct, union
vs. union, etc.)
- exceptions are struct/union behind a pointer which could also match a
forward declaration of a struct or union, respectively, and enum vs.
enum64 (see below)
Then, depending on type:
- integers:
- match if size and signedness match
- arrays & pointers:
- target types are recursively matched
- structs & unions:
- local members need to exist in target with the same name
- for each member we recursively check match unless it is already behind a
pointer, in which case we only check matching names and compatible kind
- enums:
- local variants have to have a match in target by symbolic name (but not
numeric value)
- size has to match (but enum may match enum64 and vice versa)
- function pointers:
- number and position of arguments in local type has to match target
- for each argument and the return value we recursively check match
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-5-deso@posteo.net
In order to provide type match support we require a new type of
relocation which, in turn, requires toolchain support. Recent LLVM/Clang
versions support a new value for the last argument to the
__builtin_preserve_type_info builtin, for example.
With this change we introduce the necessary constants into relevant
header files, mirroring what the compiler may support.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-2-deso@posteo.net
Implement bpf_prog_query_opts as a more expendable version of
bpf_prog_query. Expose new prog_attach_flags and attach_btf_func_id as
well:
* prog_attach_flags is a per-program attach_type; relevant only for
lsm cgroup program which might have different attach_flags
per attach_btf_id
* attach_btf_func_id is a new field expose for prog_query which
specifies real btf function id for lsm cgroup attachments
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-10-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
lsm_cgroup/ is the prefix for BPF_LSM_CGROUP.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-9-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Seems like we missed to add 2 APIs to libbpf.map and another API was
misspelled. Fix it in libbpf.map.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-16-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove support for legacy features and behaviors that previously had to
be disabled by calling libbpf_set_strict_mode():
- legacy BPF map definitions are not supported now;
- RLIMIT_MEMLOCK auto-setting, if necessary, is always on (but see
libbpf_set_memlock_rlim());
- program name is used for program pinning (instead of section name);
- cleaned up error returning logic;
- entry BPF programs should have SEC() always.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-15-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
