The daemon signal test sends signals and then expects files to be
written. It was observed on an Intel Alderlake that the signals were
sent too quickly leading to the 3 expected files not appearing.
To avoid this send the next signal only after the expected previous file
has appeared. To avoid an infinite loop the number of retries is
limited.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"grep -cv" can exit with an error code that causes the "set -e" to abort
the script. Switch to using the grep exit code in the if condition to
avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Write the JSON output to a specific file to avoid debug output
breaking it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In linux next repo, test case 'perf script tests' fails on s390.
The root case is a command line invocation of 'perf record' with
call-graph information. On s390 only DWARF formatted call-graphs are
supported and only on software events.
Change the command line parameters for s390.
Output before:
# perf test 89
89: perf script tests : FAILED!
#
Output after:
# perf test 89
89: perf script tests : Ok
#
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125100351.936262-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test 17 'Setup struct perf_event_attr' fails on s390 z/VM guest,
using linux-next kernel.
Root cause is the fall-back from hardware counter cycles
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
which returns -ENOENT on s390 z/VM guest. This causes the code to fall
back to software counter task-clock, as can be seen in the debug output:
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x1 (PERF_COUNT_SW_TASK_CLOCK) <-here
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
This succeeds on s390 z/VM guest.
This successful installation of the counter task-clock is not listed in
the expected results and the test case fails.
This is caused by commit eb2eac0c7b ("perf evsel: Fallback to
"task-clock" when not system wide") which introduced fall back from
event 'cycles' to event 'task-clock'.
To fix this on s390 allow event number 0 (cycles) and event number 1
(task-clock) as expected result.
Output before:
# ./perf test -Fv 17
17: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-stat-group1'
unsupp './tests/attr/test-stat-group1'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
expected config=0, got 1
FAILED './tests/attr/test-record-graph-default' - match failure
---- end ----
Setup struct perf_event_attr: FAILED!
#
Output after:
# ./perf test -F 17
17: Setup struct perf_event_attr : Ok
#
Fixes: eb2eac0c7b ("perf evsel: Fallback to "task-clock" when not system wide")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219143235.1075522-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ben Gainey <ben.gainey@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch loop macro maps__for_each_entry to maps__for_each_map function
that takes a callback. The function holds the maps lock, which should
be held during iteration.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Dong <lidong@vivo.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231207011722.1220634-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the DSO data tests a suite rather than individual so their output
is grouped.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231128194624.1419260-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing NULL to perf_cpu_map__new() performs
perf_cpu_map__new_online_cpus(), just directly call
perf_cpu_map__new_online_cpus() to be more intention revealing.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231129060211.1890454-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_cpu_map__dummy_new() to perf_cpu_map__new_any_cpu() to
better indicate this is creating a CPU map for the perf_event_open "any"
CPU case.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231129060211.1890454-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The diff test depends on finding the symbol test_loop in perf and will
fail if perf has been stripped and no debug object is available. In that
case, skip the test instead.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231205164924.835682-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are some old bug reports on perf diff crashing:
https://rhaas.blogspot.com/2012/06/perf-good-bad-ugly.html
Happening across them I was prompted to add two very basic tests that
will give some 'perf diff' coverage.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231120190408.281826-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test that JSON output produces valid JSON.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid replicated logic by having a common library to set the PYTHON
environment variable.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Migrate Makefile.tests to Build so that variables like rule_mkdir are
defined via Makefile.build (needed so the output directory can be
created). This requires SHELLCHECK being exported and the clean rule
tweaking to remove the files in find.
Change find "-perm -o=x" as it was failing on my Debian based Linux
kernel tree, switch to using "-executable".
Adding a filename prefix of "." to the shellcheck log files is a pain
and error prone in make, remove this prefix and just add the
shellcheck log files to .gitignore.
Fix the command echo so that running the test is displayed.
Fixes: 1638b11ef8 ("perf tools: Add perf binary dependent rule for shellcheck log in Makefile.perf")
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'vg' register for arm64 shows up in --user_regs as available when
masking the variable AT_HWCAP with 1 << 22 returns '1' as done in
perf_regs.c.
However, in subtests for support of SVE, the check for the 'vg' register
is done by masking the variable AT_HWCAP with the value 0x200000 which
is equals to 1 << 21 instead of 1 << 22.
This results in inconsistencies on certain systems where the test
expects that the 'vg' register is not operational when it is, and
vice-versa.
During the testing on a machine that the test expected not to have the
'vg' register available, 'perf record' with the option --user-regs
showed records for the 'vg' register together with all of the others,
which means that the mask for the subtest of perf_event_attr is off by
one.
Change the value of the mask from 0x200000 to 0x400000 to correct it.
Fixes: 9440ebdc33 ("perf test arm64: Add attr tests for new VG register")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20231201194617.13012-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test "probe libc's inet_pton & backtrace it with ping" fails on
powerpc as below:
# perf test -v "probe libc's inet_pton & backtrace it with
ping"
85: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 96028
ping 96056 [002] 127271.101961: probe_libc:inet_pton: (7fffa1779a60)
7fffa1779a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fffa172a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
FAIL: expected backtrace entry
"gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/glibc-hwcaps/power10/libc.so.6\)$"
got "7fffa172a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
This test installs a probe on libc's inet_pton function, which will use
uprobes and then uses perf trace on a ping to localhost. It gets 3
levels deep backtrace and checks whether it is what we expected or not.
The test started failing from RHEL 9.4 where as it works in previous
distro version (RHEL 9.2). Test expects gaih_inet function to be part of
backtrace. But in the glibc version (2.34-86) which is part of distro
where it fails, this function is missing and hence the test is failing.
From nm and ping command output we can confirm that gaih_inet function
is not present in the expected backtrace for glibc version glibc-2.34-86
[root@xxx perf]# nm /usr/lib64/glibc-hwcaps/power10/libc.so.6 | grep gaih_inet
00000000001273e0 t gaih_inet_serv
00000000001cd8d8 r gaih_inet_typeproto
[root@xxx perf]# perf script -i /tmp/perf.data.6E8
ping 104048 [000] 128582.508976: probe_libc:inet_pton: (7fff83779a60)
7fff83779a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fff8372a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
11dc73534 [unknown] (/usr/bin/ping)
7fff8362a8c4 __libc_start_call_main+0x84 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
FAIL: expected backtrace entry
"gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/glibc-hwcaps/power10/libc.so.6\)$"
got "7fff9d52a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)"
With version glibc-2.34-60 gaih_inet function is present as part of the
expected backtrace. So we cannot just remove the gaih_inet function from
the backtrace.
[root@xxx perf]# nm /usr/lib64/glibc-hwcaps/power10/libc.so.6 | grep gaih_inet
0000000000130490 t gaih_inet.constprop.0
000000000012e830 t gaih_inet_serv
00000000001d45e4 r gaih_inet_typeproto
[root@xxx perf]# ./perf script -i /tmp/perf.data.b6S
ping 67906 [000] 22699.591699: probe_libc:inet_pton_3: (7fffbdd80820) 7fffbdd80820 __GI___inet_pton+0x0
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 7fffbdd31160 gaih_inet.constprop.0+0xcd0
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 7fffbdd31c7c getaddrinfo+0x14c
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 1140d3558 [unknown] (/usr/bin/ping)
This patch solves this issue by doing a conditional skip. If there is a
gaih_inet function present in the libc then it will be added to the
expected backtrace else the function will be skipped from being added
to the expected backtrace.
Output with the patch
[root@xxx perf]# ./perf test -v "probe libc's inet_pton & backtrace it
with ping"
83: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 102662
ping 102692 [000] 127935.549973: probe_libc:inet_pton: (7fff93379a60)
7fff93379a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fff9332a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
11ef03534 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231126070914.175332-1-likhitha@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are issues as reported that need some more investigation on the
RT kernel front, till that is addressed, skip this test.
This test is already skipped for multiple hardware architectures where
the tested kernel feature is not supported.
Acked-by: Marco Elver <elver@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e368f2c848d77fbc8d259f44e2055fe469c219cf.camel@gmx.de/
Link: https://lore.kernel.org/r/20231129154718.326330-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the part that loads the BTF info to a "btf__available()" that will
lazy load the BTF info so that if we need it for some other test, which
we will in the following cset, we can reuse it.
At some point this will move from this specific 'perf test' entry to be
used in other parts of perf, do it when needed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231129154718.326330-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is already an existing config value for changing the objdump path,
so instead of having two values that do the same thing, make 'perf test'
use annotate.objdump as well.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/ZU5Cx4LTrB5q0sIG@kernel.org
Link: https://lore.kernel.org/r/20231113102327.695386-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf data symbol test depends on finding symbol buf1 in perf, and fails if
perf has been stripped and no debug object is available. In that case, skip
the test instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'data symbol'
113: Test data symbol :
--- start ---
test child forked, pid 125646
Recording workload...
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.577 MB /tmp/__perf_test.perf.data.Jhbdp (7794 samples) ]
Cleaning up files...
test child finished with -1
---- end ----
Test data symbol: FAILED!
After:
$ tools/perf/perf test -v 'data symbol'
113: Test data symbol :
--- start ---
test child forked, pid 125747
perf does not have symbol 'buf1'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
Test data symbol: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf data symbol test waits 1 second for perf to run and collect data,
which may be too little if perf takes a long time to start up, which has
been noticed on systems with many CPUs. Use existing wait_for_perf_to_start
helper to wait for perf to start.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test "Check branch stack sampling" depends on finding symbol
brstack_bench (and several others) in perf, and fails if perf has been
stripped and no debug object is available. In that case, skip the test
instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'branch stack sampling'
112: Check branch stack sampling :
--- start ---
test child forked, pid 123741
Testing user branch stack sampling
+ grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/IND_CALL/.*$ /tmp/__perf_test.program.5Dz1U/perf.script
+ cleanup
+ rm -rf /tmp/__perf_test.program.5Dz1U
test child finished with -1
---- end ----
Check branch stack sampling: FAILED!
After:
$ tools/perf/perf test -v 'branch stack sampling'
112: Check branch stack sampling :
--- start ---
test child forked, pid 125157
perf does not have symbol 'brstack_bench'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
Check branch stack sampling: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test "Check Arm64 callgraphs are complete in fp mode" depends on
finding symbol leafloop in perf, and fails if perf has been stripped and no
debug object is available. In that case, skip the test instead.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record test depends on finding symbol test_loop in perf, and fails if
perf has been stripped and no debug object is available. In that case, skip
the test instead.
Example:
Note, building with perl support adds option -Wl,-E which causes the
linker to add all (global) symbols to the dynamic symbol table. So the
test_loop symbol, being global, does not get stripped unless NO_LIBPERL=1
Before:
$ make NO_LIBPERL=1 -C tools/perf >/dev/null 2>&1
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'record tests'
91: perf record tests :
--- start ---
test child forked, pid 118750
Basic --per-thread mode test
Per-thread record [Failed missing output]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
System-wide record [Skipped not supported]
Basic target workload test
Workload record [Failed missing output]
test child finished with -1
---- end ----
perf record tests: FAILED!
After:
$ tools/perf/perf test -v 'record tests'
91: perf record tests :
--- start ---
test child forked, pid 120025
perf does not have symbol 'test_loop'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
perf record tests: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf pipe recording and injection test depends on finding symbol noploop in
perf, and fails if perf has been stripped and no debug object is available.
In that case, skip the test instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v pipe
86: perf pipe recording and injection test :
--- start ---
test child forked, pid 47734
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
47741 47741 -1 |perf
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
cannot find noploop function in pipe #1
test child finished with -1
---- end ----
perf pipe recording and injection test: FAILED!
After:
$ tools/perf/perf test -v pipe
86: perf pipe recording and injection test :
--- start ---
test child forked, pid 48996
perf does not have symbol 'noploop'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
perf pipe recording and injection test: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some shell tests depend on finding symbols for perf itself, and fail if
perf has been stripped and no debug object is available. Add helper
functions to check if perf has a needed symbol. This is preparation for
amending the tests themselves to be skipped if a needed symbol is not
found.
The functions make use of the "Symbols" test which reads and checks symbols
from a dso, perf itself by default. Note the "Symbols" test will find
symbols using the same method as other perf tests, including, for example,
looking in the buildid cache.
An alternative would be to prevent the needed symbols from being stripped,
which seems to work with gcc's externally_visible attribute, but that
attribute is not supported by clang.
Another alternative would be to use option -Wl,-E (which is already used
when perf is built with perl support) which causes the linker to add all
(global) symbols to the dynamic symbol table. Then the required symbols
need only be made global in scope to avoid being strippable. However that
goes beyond what is needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add rule in new Makefile "tests/Makefile.tests" for running shellcheck
on shell test scripts. This automates below shellcheck into the build.
$ for F in $(find tests/shell/ -perm -o=x -name '*.sh'); do shellcheck -S warning $F; done
Condition for shellcheck is added in Makefile.perf to avoid build
breakage in the absence of shellcheck binary. Update Makefile.perf to
contain new rule for "SHELLCHECK_TEST" which is for making shellcheck
test as a dependency on perf binary.
Added "tests/Makefile.tests" to run shellcheck on shellscripts in
tests/shell. The make rule "SHLLCHECK_RUN" ensures that, every time
during make, shellcheck will be run only on modified files during
subsequent invocations. By this, if any newly added shell scripts or
fixes in existing scripts breaks coding/formatting style, it will get
captured during the perf build.
Example build failure by modifying probe_vfs_getname.sh in tests/shell:
In tests/shell/probe_vfs_getname.sh line 8:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1
make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:244: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
Here, like other files which gets created during compilation (ex:
.builtin-bench.o.cmd or .perf.o.cmd ), create .shellcheck_log also as a
hidden file. Example: tests/shell/.probe_vfs_getname.sh.shellcheck_log
shellcheck is re-run if any of the script gets modified based on its
dependency of this log file.
After this, for testing, changed "tests/shell/trace+probe_vfs_getname.sh" to
break shellcheck format. In the next make run, it is also captured:
In tests/shell/probe_vfs_getname.sh line 8:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1
make[3]: *** Waiting for unfinished jobs....
In tests/shell/trace+probe_vfs_getname.sh line 14:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.trace+probe_vfs_getname.sh.shellcheck_log] Error 1
make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:244: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
Failure log can be found in the stdout of make itself.
This is reported at build time. To be able to go ahead with the build or
disable shellcheck even though it is known that some test is broken, add
a "NO_SHELLCHECK" option. Example:
make NO_SHELLCHECK=1
INSTALL libsubcmd_headers
INSTALL libsymbol_headers
INSTALL libapi_headers
INSTALL libperf_headers
INSTALL libbpf_headers
LINK perf
Note:
This is tested on RHEL and also SLES. Use below check:
"$(shell which shellcheck 2> /dev/null)" to look for presence
of shellcheck binary. The approach "shell command -v" is not
used here. In some of the distros(RHEL), command is available
as executable file (/usr/bin/command). But in some distros(SLES),
it is a shell builtin and not available as executable file.
Committer testing:
$ type shellcheck
shellcheck is hashed (/usr/bin/shellcheck)
$ rpm -qf /usr/bin/shellcheck
ShellCheck-0.9.0-2.fc38.x86_64
$
$ alias m
$ git diff
diff --git a/tools/perf/tests/shell/probe_vfs_getname.sh b/tools/perf/tests/shell/probe_vfs_getname.sh
index 554e12e83c55fd56..dbc14634678e2bf6 100755
--- a/tools/perf/tests/shell/probe_vfs_getname.sh
+++ b/tools/perf/tests/shell/probe_vfs_getname.sh
@@ -5,7 +5,7 @@
# Arnaldo Carvalho de Melo <acme@kernel.org>, 2017
# shellcheck source=lib/probe.sh
-. "$(dirname $0)"/lib/probe.sh
+. $(dirname $0)/lib/probe.sh
skip_if_no_perf_probe || exit 2
alias m='rm -rf ~/libexec/perf-core/ ; make -k CORESIGHT=1 O=/tmp/build/$(basename $PWD) -C tools/perf install-bin && perf test python'
$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build
<SNIP>
INSTALL libbpf_headers
In tests/shell/probe_vfs_getname.sh line 8:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
make[3]: *** [/home/acme/git/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1
make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:244: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf'
$
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231123160232.94253-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These variables are never referenced in the code, just remove them.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231115064255.11057-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tool has previously made legacy events the priority so with
or without a PMU the legacy event would be opened:
$ perf stat -e cpu-cycles,cpu/cpu-cycles/ true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors
After aliases, add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 833967 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
...
Fixes to make hybrid/BIG.little PMUs behave correctly, ie as core PMUs
capable of opening legacy events on each, removing hard coded "cpu_core"
and "cpu_atom" Intel PMU names, etc. caused a behavioral difference on
Apple/ARM due to latent issues in the PMU driver reported in:
https://lore.kernel.org/lkml/08f1f185-e259-4014-9ca4-6411d5c1bc65@marcan.st/
As part of that report Mark Rutland <mark.rutland@arm.com> requested
that legacy events not be higher in priority when a PMU is specified
reversing what has until this change been perf's default behavior. With
this change the above becomes:
$ perf stat -e cpu-cycles,cpu/cpu-cycles/ true
Using CPUID GenuineIntel-6-8D-1
Attempt to add: cpu/cpu-cycles=0/
..after resolving event: cpu/event=0x3c/
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 827628 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 4 (PERF_TYPE_RAW)
size 136
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
...
So the second event has become a raw event as
/sys/devices/cpu/events/cpu-cycles exists.
A fix was necessary to config_term_pmu in parse-events.c as check_alias
expansion needs to happen after config_term_pmu, and config_term_pmu may
need calling a second time because of this.
config_term_pmu is updated to not use the legacy event when the PMU has
such a named event (either from JSON or sysfs).
The bulk of this change is updating all of the parse-events test
expectations so that if a sysfs/JSON event exists for a PMU the test
doesn't fail - a further sign, if it were needed, that the legacy event
priority was a known and tested behavior of the perf tool.
Reported-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231123042922.834425-1-irogers@google.com
[ Initialize the 'alias_rewrote_terms' variable to false to address a clang warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a basic test for the branch counter feature.
The test verifies that
- The new filter can be successfully applied on the supported platforms.
- The counter value can be outputted via the perf report -D
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tinghao Zhang <tinghao.zhang@intel.com>
Link: https://lore.kernel.org/r/20231107184020.1497571-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current use of atomics can lead to test failures, as tests (such as
tests/shell/record.sh) search for samples with "test_loop" as the
top-most stack frame, but find frames related to the atomic operation
(e.g. __aarch64_ldadd4_relax).
This change simply removes the "count" variable, as it is not necessary.
Fixes: 1962ab6f6e ("perf test workload thloop: Make count increments atomic")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Nick Forrington <nick.forrington@arm.com>
Acked-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231102162225.50028-1-nick.forrington@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All of the other Perf subcommands that use objdump have an option to
specify the binary, so add the same option to 'perf test'.
This is useful if you have built the kernel with a different toolchain
to the system one, where the system objdump may fail to disassemble
vmlinux.
Now this can be fixed with something like this:
$ perf test --objdump llvm-objdump "object code reading"
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20231106151051.129440-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 using linux-next the test case:
87: perf record offcpu profiling tests
fails. The root cause is this command
# ./perf record --off-cpu -e dummy -- ./perf bench sched messaging -l 10
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.231 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.077 MB perf.data (401 samples) ]
#
It does not generate 800+ sample entries, on s390 usually around
40[1-9], sometimes a few more, but never more than 450. The higher the
number of CPUs the lower the number of samples.
Looking at function chain:
bench_sched_messaging()
+--> group()
the senders and receiver threads are created. The senders and receivers
call function ready() which writes one bytes and wait for a reply using
poll system() call.
As context switches are counted, the function ready() will trigger a
context switch when no input data is available after the write system
call. The write system call does not trigger context switches when the
data size is small. And writing 1000 bytes (10 iterations with
100 bytes) is not much and certainly won't block.
The 400+ context switch on s390 occur when the some receiver/sender
threads call ready() and wait for the response from function
bench_sched_messaging() being kicked off.
Lower the number of expected context switches to 400 to succeed on s390.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20231106091627.2022530-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake, Please fix it.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20231030075825.3701-1-zhaimingbing@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It tries cycles (or cpu-clock on s390) event with exclude_kernel bit to
open. But other arch on a VM can fail with the hardware event and need
to fallback to the software event in the same way.
So let's get rid of the cpuid check and use generic fallback mechanism
using an array of event candidates. Now event in the odd index excludes
the kernel so use that for the return value.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20231103195541.67788-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are spelling mistakes in comments and a pr_debug message. Fix them.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20231003074911.220216-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One last case, caught while testing with amazonlinux:2, centos:stream,
etc:
4 7.28 amazonlinux:2 : FAIL egrep: warning: egrep is obsolescent; using grep -E
gcc version 7.3.1 20180712 (Red Hat 7.3.1-17) (GCC)
8 13.87 centos:stream : FAIL egrep: warning: egrep is obsolescent; using grep -E
Reviewed-by: Guilherme Amadio <amadio@gentoo.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZUEdtblE8qDAQkBK@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two reasons to do this, firstly there is a shellcheck warning
in cs_etm_dev_name(), which can be completely deleted. And secondly the
current iteration method doesn't support systems with both ETE and ETM
because it picks one or the other. There isn't a known system with this
configuration, but it could happen in the future.
Iterating over all the sources for each CPU can be done by going through
/sys/bus/event_source/devices/cs_etm/cpu* and following the symlink back
to the Coresight device in /sys/bus/coresight/devices. This will work
whether the device is ETE, ETM or any future name, and is much simpler
and doesn't require any hard coded version numbers
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: tianruidong@linux.alibaba.com
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: atrajeev@linux.vnet.ibm.com
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231023131550.487760-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Comparing pointers with reference count checking is tricky to avoid a
SEGV. Add a convenience macro to simplify and use.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
CoreSight might be not available, in such case, skip the tests.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: vmolnaro@redhat.com
Link: https://lore.kernel.org/r/20231019091137.22525-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on stat_all_metricgroups.sh reports
below warning:
In ./tests/shell/stat_all_metricgroups.sh line 7:
function ParanoidAndNotRoot()
^-- SC2112: 'function' keyword is non-standard. Delete it.
As per the format, "function" is a non-standard keyword that
can be used to declare functions. Fix this by removing the
"function" keyword from ParanoidAndNotRoot function
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on record_sideband.sh throws below
warning:
In tests/shell/record_sideband.sh line 25:
if ! perf record -o ${perfdata} -BN --no-bpf-event -C $1 true 2>&1 >/dev/null
^--^ SC2069: To redirect stdout+stderr, 2>&1 must be last (or use '{ cmd > file; } 2>&1' to clarify).
This shows shellcheck warning SC2069 where the redirection
order needs to be fixed. Use "cmd > /dev/null 2>&1" to fix
the redirection of perf record output
Fixes: 23b97c7ee9 ("perf test: Add test case for record sideband events")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: disgoel@linux.vnet.ibm.com
Link: https://lore.kernel.org/r/20231013073021.99794-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on lock_contention.sh generates below
warning
In tests/shell/lock_contention.sh line 36:
if [ `nproc` -lt 4 ]; then
^-----^ SC2046: Quote this to prevent word splitting.
Here since nproc will generate a single word output
and there is no possibility of word splitting, this
warning can be ignored. Use exception for this with
"disable" option in shellcheck. This warning is observed
after commit:
"commit 29441ab3a3 ("perf test lock_contention.sh: Skip test
if not enough CPUs")"
Fixes: 29441ab3a3 ("perf test lock_contention.sh: Skip test if not enough CPUs")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The testcase "Object code reading" fails in somecases
for "fs_something" sub test as below:
Reading object code for memory address: 0xc008000007f0142c
File is: /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko
On file address is: 0x1114cc
Objdump command is: objdump -z -d --start-address=0x11142c --stop-address=0x1114ac /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko
objdump read too few bytes: 128
test child finished with -1
This can alo be reproduced when running perf record with
workload that exercises fs_something() code. In the test
setup, this is exercising xfs code since root is xfs.
# perf record ./a.out
# perf report -v |grep "xfs.ko"
0.76% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007de5efc B [k] xlog_cil_commit
0.74% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007d5ae18 B [k] xfs_btree_key_offset
0.74% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007e11fd4 B [k] 0x0000000000112074
Here addr "0xc008000007e11fd4" is not resolved. since this is a
kernel module, its offset is from the DSO. Xfs module is loaded
at 0xc008000007d00000
# cat /proc/modules | grep xfs
xfs 2228224 3 - Live 0xc008000007d00000
And size is 0x220000. So its loaded between 0xc008000007d00000
and 0xc008000007f20000. From objdump, text section is:
text 0010f7bc 0000000000000000 0000000000000000 000000a0 2**4
Hence perf captured ip maps to 0x112074 which is:
( ip - start of module ) + a0
This offset 0x112074 falls out .text section which is up to 0x10f7bc
In this case for module, the address 0xc008000007e11fd4 is pointing
to stub instructions. This address range represents the module stubs
which is allocated on module load and hence is not part of DSO offset.
To address this issue in "object code reading", skip the sample if
address falls out of text section and is within the module end.
Use the "text_end" member of "struct dso" to do this check.
To address this issue in "perf report", exploring an option of
having stubs range as part of the /proc/kallsyms, so that perf
report can resolve addresses in stubs range
However this patch uses text_end to skip the stub range for
Object code reading testcase.
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230928075213.84392-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Switch the test program to sleep that makes more sense for system wide
events. Only enable system wide when root or not paranoid. This avoids
failures under some testing conditions like ARM cloud.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230930060206.2353141-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Testcase "Parsing of all PMU events from sysfs" parse events for
all PMUs, and not just cpu. In case of powerpc, the PowerVM
environment supports events from hv_24x7 and hv_gpci PMU which
is of example format like below:
- hv_24x7/CPM_ADJUNCT_INST,domain=?,core=?/
- hv_gpci/event,partition_id=?/
The value for "?" needs to be filled in depending on system
configuration. It is better to skip these parametrized events
in this test as it is done in:
'commit b50d691e50 ("perf test: Fix "all PMU test" to skip
parametrized events")' which handled a simialr instance with
"all PMU test".
Fix parse-events test to skip parametrized events since
it needs proper setup of the parameters.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230927181703.80936-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add new event test for uncore system event which is used to verify the
functionality of "Compat" matching multiple identifiers and the new event
fields "EventidCode" and "NodeType".
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-6-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The perf_pmu_test_event.matching_pmu didn't work. No matter what its
value is, it does not affect the test results. So let matching_pmu be
used for matching perf_pmu_test_pmu.pmu.name.
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-5-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
