Try to access RAM with the largest bit width possible, but without
doing unaligned accesses.
A further improvement could be to use multiple read and writes as the
assembly version was trying to do.
Tested on a BeagleV Starlight with a SiFive U74 core, where the
improvement is noticeable.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.
This turns access_ok() into a cheaper check against TASK_SIZE_MAX.
As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes
Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that all architectures have a working futex implementation in any
configuration, remove the runtime detection code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211026100432.1730393-2-arnd@kernel.org
Core changes:
- Prevent a potential deadlock when initial priority is assigned to a
newly created interrupt thread. A recent change to plug a race between
cpuset and __sched_setscheduler() introduced a new lock dependency
which is now triggered. Break the lock dependency chain by moving the
priority assignment to the thread function.
- A couple of small updates to make the irq core RT safe.
- Confine the irq_cpu_online/offline() API to the only left unfixable
user Cavium Octeon so that it does not grow new usage.
- A small documentation update
Driver changes:
- A large cross architecture rework to move irq_enter/exit() into the
architecture code to make addressing the NOHZ_FULL/RCU issues simpler.
- The obligatory new irq chip driver for Microchip EIC
- Modularize a few irq chip drivers
- Expand usage of devm_*() helpers throughout the driver code
- The usual small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=r6ln
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Prevent a potential deadlock when initial priority is assigned to a
newly created interrupt thread. A recent change to plug a race
between cpuset and __sched_setscheduler() introduced a new lock
dependency which is now triggered. Break the lock dependency chain
by moving the priority assignment to the thread function.
- A couple of small updates to make the irq core RT safe.
- Confine the irq_cpu_online/offline() API to the only left unfixable
user Cavium Octeon so that it does not grow new usage.
- A small documentation update
Driver changes:
- A large cross architecture rework to move irq_enter/exit() into the
architecture code to make addressing the NOHZ_FULL/RCU issues
simpler.
- The obligatory new irq chip driver for Microchip EIC
- Modularize a few irq chip drivers
- Expand usage of devm_*() helpers throughout the driver code
- The usual small fixes and improvements all over the place"
* tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
h8300: Fix linux/irqchip.h include mess
dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings
MIPS: irq: Avoid an unused-variable error
genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
MIPS: loongson64: Drop call to irq_cpu_offline()
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
...
Now that entry code handles IRQ entry (including setting the IRQ regs)
before calling irqchip code, irqchip code can safely call
generic_handle_domain_irq(), and there's no functional reason for it to
call handle_domain_irq().
Let's cement this split of responsibility and remove handle_domain_irq()
entirely, updating irqchip drivers to call generic_handle_domain_irq().
For consistency, handle_domain_nmi() is similarly removed and replaced
with a generic_handle_domain_nmi() function which also does not perform
any entry logic.
Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire
when they were called in an inappropriate context. So that we can
identify similar issues going forward, similar WARN_ON_ONCE() logic is
added to the generic_handle_*() functions, and comments are updated for
clarity and consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
In preparation for removing HANDLE_DOMAIN_IRQ_IRQENTRY, have arch/csky
perform all the irqentry accounting in its entry code. As arch/csky uses
GENERIC_IRQ_MULTI_HANDLER, we can use generic_handle_arch_irq() to do
so.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Going forward we want architecture/entry code to perform all the
necessary work to enter/exit IRQ context, with irqchip code merely
handling the mapping of the interrupt to any handler(s). Among other
reasons, this is necessary to consistently fix some longstanding issues
with the ordering of lockdep/RCU/tracing instrumentation which many
architectures get wrong today in their entry code.
Importantly, rcu_irq_{enter,exit}() must be called precisely once per
IRQ exception, so that rcu_is_cpu_rrupt_from_idle() can correctly
identify when an interrupt was taken from an idle context which must be
explicitly preempted. Currently handle_domain_irq() calls
rcu_irq_{enter,exit}() via irq_{enter,exit}(), but entry code needs to
be able to call rcu_irq_{enter,exit}() earlier for correct ordering
across lockdep/RCU/tracing updates for sequences such as:
lockdep_hardirqs_off(CALLER_ADDR0);
rcu_irq_enter();
trace_hardirqs_off_finish();
To permit each architecture to be converted to the new style in turn,
this patch adds a new CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY selected by all
current users of HANDLE_DOMAIN_IRQ, which gates the existing behaviour.
When CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY is not selected,
handle_domain_irq() requires entry code to perform the
irq_{enter,exit}() work, with an explicit check for this matching the
style of handle_domain_nmi().
Subsequent patches will:
1) Add the necessary IRQ entry accounting to each architecture in turn,
dropping CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY from that architecture's
Kconfig.
2) Remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY once it is no longer
selected.
3) Convert irqchip drivers to consistently use
generic_handle_domain_irq() rather than handle_domain_irq().
4) Remove handle_domain_irq() and CONFIG_HANDLE_DOMAIN_IRQ.
... which should leave us with a clear split of responsiblity across the
entry and irqchip code, making it possible to perform additional
cleanups and fixes for the aforementioned longstanding issues with entry
code.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Building csky:allmodconfig results in the following build errors.
arch/csky/mm/tcm.c:9:2: error:
#error "You should define ITCM_RAM_BASE"
9 | #error "You should define ITCM_RAM_BASE"
| ^~~~~
arch/csky/mm/tcm.c:14:2: error:
#error "You should define DTCM_RAM_BASE"
14 | #error "You should define DTCM_RAM_BASE"
| ^~~~~
arch/csky/mm/tcm.c:18:2: error:
#error "You should define correct DTCM_RAM_BASE"
18 | #error "You should define correct DTCM_RAM_BASE"
This is seen with compile tests since those enable HAVE_TCM,
but do not provide useful default values for ITCM_RAM_BASE or
DTCM_RAM_BASE. Disable HAVE_TCM for commpile tests to avoid
the error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>
Compiling csky:allmodconfig with an upstream C compiler results
in the following error.
csky-linux-gcc: error:
unrecognized command-line option '-mbacktrace';
did you mean '-fbacktrace'?
Select ARCH_WANT_FRAME_POINTERS only if gcc supports it to
avoid the error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>
- GENERIC_ALLOCATOR is duplicated
- Remove USB_ARCH_HAS_OHCI & USB_ARCH_HAS_EHCI, because they
have been removed from linux.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in
arch/csky/Kconfig.
The symbol in e1000 has been around longer, so change arch/csky/ to use
DRAM_BASE instead of RAM_BASE to remove the conflict. (although e1000
is also a 2-line change)
Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It could help to reduce the latency of the time-related functions
in user space.
We have referenced arm's and riscv's implementation for the patch.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Here is the log after enabled:
[ 1.798972] kmemleak: Kernel memory leak detector initialized (mem pool available: 15851)
[ 1.798983] kmemleak: Automatic memory scanning thread started
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
There are two implementation of spinlock in arch/csky:
- simple one (NR_CPU = 1,2)
- tick's one (NR_CPU = 3,4)
Remove the simple one.
There is already smp_mb in spinlock, so remove the definition of
smp_mb__after_spinlock.
Link: https://lore.kernel.org/linux-csky/20200807081253.GD2674@hirez.programming.kicks-ass.net/#t
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Peter Zijlstra <peterz@infradead.org>k
Cc: Arnd Bergmann <arnd@arndb.de>
Arnd said:
I would guess that for csky, this is a mistake, as the architecture
is fairly new and should be able to implement it.
Guo reply:
The c610, c807, c810 don't support SMP, so futex_cmpxchg_enabled = 1
with asm-generic's implementation.
For c860, there is no HAVE_FUTEX_CMPXCHG and cmpxchg_inatomic/inuser
implementation, so futex_cmpxchg_enabled = 0.
Thx for point it out, we'll implement cmpxchg_inatomic/inuser for
C860 and still use asm-generic for non-smp CPUs.
LTP test:
futex_wait01 1 TPASS : futex_wait(): errno=ETIMEDOUT(110): Connection timed out
futex_wait01 2 TPASS : futex_wait(): errno=EAGAIN/EWOULDBLOCK(11): Resource temporarily unavailable
futex_wait01 3 TPASS : futex_wait(): errno=ETIMEDOUT(110): Connection timed out
futex_wait01 4 TPASS : futex_wait(): errno=EAGAIN/EWOULDBLOCK(11): Resource temporarily unavailable
futex_wait02 1 TPASS : futex_wait() woken up
futex_wait03 1 TPASS : futex_wait() woken up
futex_wait04 1 TPASS : futex_wait() returned -1: errno=EAGAIN/EWOULDBLOCK(11): Resource temporarily unavailable
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/lkml/CAK8P3a3+WaQNyJ6Za2qfu6=0mBgU1hApnRXrdp1b1=P7wwyRUg@mail.gmail.com/
There are two ways for translating va to pa for csky:
- Use TLB(Translate Lookup Buffer) and PTW (Page Table Walk)
- Use SSEG0/1 (Simple Segment Mapping)
We use tlb mapping 0-2G and 3G-4G virtual address area and SSEG0/1
are for 2G-2.5G and 2.5G-3G translation. We could disable SSEG0
to use 2G-2.5G as TLB user mapping.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as
a result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one
Arm platform. These all do timer ticks slighly differently, and this
gets cleaned up to the point they at least all call the same helper
function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
in Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=QpNs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.
Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.
For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.
At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:
text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent
On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
In order to make adding configurable features into seccomp easier,
it's better to have the options at one single location, considering
especially that the bulk of seccomp code is arch-independent. An quick
look also show that many SECCOMP descriptions are outdated; they talk
about /proc rather than prctl.
As a result of moving the config option and keeping it default on,
architectures arm, arm64, csky, riscv, sh, and xtensa did not have SECCOMP
on by default prior to this and SECCOMP will be default in this change.
Architectures microblaze, mips, powerpc, s390, sh, and sparc have an
outdated depend on PROC_FS and this dependency is removed in this change.
Suggested-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/lkml/CAG48ez1YWz9cnp08UZgeieYRhHdqh-ch7aNwc4JRBnGyrmgfMg@mail.gmail.com/
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
[kees: added HAVE_ARCH_SECCOMP help text, tweaked wording]
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/9ede6ef35c847e58d61e476c6a39540520066613.1600951211.git.yifeifz2@illinois.edu
Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not
set stubs for routines related to overriding the address space are
provided so that architectures can start to opt out of providing set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The C860 processors support 4 cores smp for maximum, so set NR_CPU
to 4 as default
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Inspired by the commit 42d038c4fb ("arm64: Add support for function
error injection"), this patch supports function error injection for
csky.
This patch mainly support two functions: one is regs_set_return_value()
which is used to overwrite the return value; the another function is
override_function_with_return() which is to override the probed
function returning and jump to its caller.
Test log:
cd /sys/kernel/debug/fail_function/
echo sys_clone > inject
echo 100 > probability
echo 1 > interval
ls /
[ 108.644163] FAULT_INJECTION: forcing a failure.
[ 108.644163] name fail_function, interval 1, probability 100, space 0, times 1
[ 108.647799] CPU: 0 PID: 104 Comm: sh Not tainted 5.8.0-rc5+ #46
[ 108.648384] Call Trace:
[ 108.649339] [<8005eed4>] walk_stackframe+0x0/0xf0
[ 108.649679] [<8005f16a>] show_stack+0x32/0x5c
[ 108.649927] [<8040f9d2>] dump_stack+0x6e/0x9c
[ 108.650271] [<80406f7e>] should_fail+0x15e/0x1ac
[ 108.650720] [<80118ba8>] fei_kprobe_handler+0x28/0x5c
[ 108.651519] [<80754110>] kprobe_breakpoint_handler+0x144/0x1cc
[ 108.652289] [<8005d6da>] trap_c+0x8e/0x110
[ 108.652816] [<8005ce8c>] csky_trap+0x5c/0x70
-sh: can't fork: Invalid argument
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
secure_computing() is called first in syscall_trace_enter() so that
a system call will be aborted quickly without doing succeeding syscall
tracing if seccomp rules want to deny that system call.
TODO:
- Update https://github.com/seccomp/libseccomp csky support
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same process creation calling convention based on
copy_thread_tls() and struct kernel_clone_args. This will make it easier to
maintain the core process creation code under kernel/, simplifies the
callpaths and makes the identical for all architectures.
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The implementation of show_stack will panic with wrong fp:
addr = *fp++;
because the fp isn't checked properly.
The current implementations of show_stack, wchan and stack_trace
haven't been designed properly, so just deprecate them.
This patch is a reference to riscv's way, all codes are modified from
arm's. The patch is passed with:
- cat /proc/<pid>/stack
- cat /proc/<pid>/wchan
- echo c > /proc/sysrq-trigger
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
This patch adds support for uprobes on csky architecture.
Just like kprobe, it support single-step and simulate instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch enable kprobes, kretprobes, ftrace interface. It utilized
software breakpoint and single step debug exceptions, instructions
simulation on csky.
We use USR_BKPT replace origin instruction, and the kprobe handler
prepares an excutable memory slot for out-of-line execution with a
copy of the original instruction being probed. Most of instructions
could be executed by single-step, but some instructions need origin
pc value to execute and we need software simulate these instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Lockdep is needed by proving the spinlocks and rwlocks. Currently,
we only put trace_hardirqs_on/off with csky_irq and
ret_from_exception.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
This patch implements FTRACE_WITH_REGS for csky, which allows a traced
function's arguments (and some other registers) to be captured into a
struct pt_regs, allowing these to be inspected and/or modified.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Copied and adapted from vincent's patch, but modified for csky.
ref:
https://lore.kernel.org/linux-riscv/1572919114-3886-3-git-send-email-vincent.chen@sifive.com/raw
Add calls to rseq_signal_deliver(), rseq_handle_notify_resume() and
rseq_syscall() to introduce RSEQ support.
1. Call the rseq_handle_notify_resume() function on return to userspace
if TIF_NOTIFY_RESUME thread flag is set.
2. Call the rseq_signal_deliver() function to fixup on the pre-signal
frame when a signal is delivered on top of a restartable sequence
critical section.
3. Check that system calls are not invoked from within rseq critical
sections by invoking rseq_signal() from ret_from_syscall(). With
CONFIG_DEBUG_RSEQ, such behavior results in termination of the
process with SIGSEGV.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
This is required for clone3 which passes the TLS value through a
struct rather than a register.
Cc: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Add the pci related code for csky arch to support basic pci virtual
function, such as qemu virt-pci-9pfs.
Signed-off-by: MaJun <majun258@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
CONFIG_CLKSRC_OF is gone since commit bb0eb050a5
("clocksource/drivers: Rename CLKSRC_OF to TIMER_OF"). The platform
already selects TIMER_OF.
CONFIG_HAVE_DMA_API_DEBUG is gone since commit 6e88628d03 ("dma-debug:
remove CONFIG_HAVE_DMA_API_DEBUG").
CONFIG_DEFAULT_DEADLINE is gone since commit f382fb0bce ("block:
remove legacy IO schedulers").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Fix wording in help text for the CPU_HAS_LDSTEX symbol.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Some CPUs don't support icache specific instructions to flush icache
lines in broadcast way. We use cpu control registers to flush local
icache and use IPI to notify other cores.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
After fixaddr_init is separated from highmem, we could use tcm
without highmem selected. (610 (abiv1) don't support highmem,
but it could use tcm now.)
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The implementation are not only used by TCM but also used by sram on
SOC bus. It follow existed linux tcm software interface, so that old
tcm application codes could be re-used directly.
Software interface list in asm/tcm.h:
- Variables/Const: __tcmdata, __tcmconst
- Functions: __tcmfunc, __tcmlocalfunc
- Malloc/Free: tcm_alloc, tcm_free
In linux menuconfig:
- Choose a TCM contain instrctions + data or separated in ITCM/DTCM.
- Determine TCM_BASE (DTCM_BASE) in phyiscal address.
- Determine size of TCM or ITCM(DTCM) in page counts.
Here is hello tcm example from Documentation/arm/tcm.rst which could
be directly used:
/* Uninitialized data */
static u32 __tcmdata tcmvar;
/* Initialized data */
static u32 __tcmdata tcmassigned = 0x2BADBABEU;
/* Constant */
static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
static void __tcmlocalfunc tcm_to_tcm(void)
{
int i;
for (i = 0; i < 100; i++)
tcmvar ++;
}
static void __tcmfunc hello_tcm(void)
{
/* Some abstract code that runs in ITCM */
int i;
for (i = 0; i < 100; i++) {
tcmvar ++;
}
tcm_to_tcm();
}
static void __init test_tcm(void)
{
u32 *tcmem;
int i;
hello_tcm();
printk("Hello TCM executed from ITCM RAM\n");
printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
tcmvar = 0xDEADBEEFU;
printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
/* Allocate some TCM memory from the pool */
tcmem = tcm_alloc(20);
if (tcmem) {
printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
tcmem[0] = 0xDEADBEEFU;
tcmem[1] = 0x2BADBABEU;
tcmem[2] = 0xCAFEBABEU;
tcmem[3] = 0xDEADBEEFU;
tcmem[4] = 0x2BADBABEU;
for (i = 0; i < 5; i++)
printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
tcm_free(tcmem, 20);
}
}
TODO:
- Separate fixup mapping from highmem
- Support abiv1
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
This is a basic -fstack-protector support without per-task canary
switching. The protector will report something like when stack
corruption is detected:
It's tested with strcpy local array overflow in sys_kill and get:
stack-protector: Kernel stack is corrupted in: sys_kill+0x23c/0x23c
TODO:
- Support task switch for different cannary
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Let arch help to select interrupt controller's and timer's drivers
instead of people using menuconfig to select. This help the mini system
boot up.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
