[ Upstream commit 68bb10101e ]
The commit mentioned below causes the ovs_flow_tbl_lookup() function
to be called with the masked key. However, it's supposed to be called
with the unmasked key. This due to the fact that the datapath supports
installing wider flows, and OVS relies on this behavior. For example
if ipv4(src=1.1.1.1/192.0.0.0, dst=1.1.1.2/192.0.0.0) exists, a wider
flow (smaller mask) of ipv4(src=192.1.1.1/128.0.0.0,dst=192.1.1.2/
128.0.0.0) is allowed to be added.
However, if we try to add a wildcard rule, the installation fails:
$ ovs-appctl dpctl/add-flow system@myDP "in_port(1),eth_type(0x0800), \
ipv4(src=1.1.1.1/192.0.0.0,dst=1.1.1.2/192.0.0.0,frag=no)" 2
$ ovs-appctl dpctl/add-flow system@myDP "in_port(1),eth_type(0x0800), \
ipv4(src=192.1.1.1/0.0.0.0,dst=49.1.1.2/0.0.0.0,frag=no)" 2
ovs-vswitchd: updating flow table (File exists)
The reason is that the key used to determine if the flow is already
present in the system uses the original key ANDed with the mask.
This results in the IP address not being part of the (miniflow) key,
i.e., being substituted with an all-zero value. When doing the actual
lookup, this results in the key wrongfully matching the first flow,
and therefore the flow does not get installed.
This change reverses the commit below, but rather than having the key
on the stack, it's allocated.
Fixes: 190aa3e778 ("openvswitch: Fix Frame-size larger than 1024 bytes warning.")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fc60e2ff9 ]
$number + > bash means redirect FD $number, e.g. commonly
used 2> redirects stderr (fd 2). The test uses 8192> to
write the number 8192 to a file, this results in:
./devlink.sh: line 499: 8192: Bad file descriptor
Oddly the test also papers over this issue by checking
for failure (expecting an error rather than success)
so it passes, anyway.
Fixes: ff18176ad8 ("selftests: Add a test of large binary to devlink health test")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55d5a86618 ]
The call to clk_disable_unprepare() is left out in the error handling of
devm_rtc_allocate_device. Add it back.
Fixes: 5490a1e018 ("rtc: mxc_v2: fix possible race condition")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20221122085046.21689-1-guozihua@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72abeedd83 ]
The default setting of end_time minus start_time is whole 1 second.
Thus, if it's not being configured in any GCL entry then it will be
staying at original 1 second.
This patch is changing the start_time and end_time to be end_time as
if setting zero will be having weird HW behavior where the gate will
not be fully closed.
Fixes: ec50a9d437 ("igc: Add support for taprio offloading")
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fd39464a ]
Add support for Qbv schedules where one queue stays open
in consecutive entries. Currently that's not supported.
Example schedule:
|tc qdisc replace dev ${INTERFACE} handle 100 parent root taprio num_tc 3 \
| map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
| queues 1@0 1@1 2@2 \
| base-time ${BASETIME} \
| sched-entry S 0x01 300000 \ # Stream High/Low
| sched-entry S 0x06 500000 \ # Management and Best Effort
| sched-entry S 0x04 200000 \ # Best Effort
| flags 0x02
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 72abeedd83 ("igc: Set Qbv start_time and end_time to end_time if not being configured in GCL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d05251d53 ]
Qbv users can specify a cycle time that is not equal to the total GCL
intervals. Hence, recalculation is necessary here to exclude the time
interval that exceeds the cycle time. As those GCL which exceeds the
cycle time will be truncated.
According to IEEE Std. 802.1Q-2018 section 8.6.9.2, once the end of
the list is reached, it will switch to the END_OF_CYCLE state and
leave the gates in the same state until the next cycle is started.
Fixes: ec50a9d437 ("igc: Add support for taprio offloading")
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e17090eb24 ]
Introduce qbv_enable flag in igc_adapter struct to store the Qbv on/off.
So this allow the BaseTime to enroll with zero value.
Fixes: 61572d5f8f ("igc: Simplify TSN flags handling")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b61764fb4 ]
Using the tc qdisc command, the user can set basetime to any value.
Checking should be done on the driver's side to prevent registering
basetime values that are less than zero.
Fixes: ec50a9d437 ("igc: Add support for taprio offloading")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8f45be01d ]
Configuring strict cycle mode in the controller forces more well
behaved transmissions when taprio is offloaded.
When set this strict_cycle and strict_end, transmission is not
enabled if the whole packet cannot be completed before end of
the Qbv cycle.
Fixes: 82faa9b799 ("igc: Add support for ETF offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db0b124f02 ]
The I225 hardware has a limitation that packets can only be scheduled
in the [0, cycle-time] interval. So, scheduling a packet to the start
of the next cycle doesn't usually work.
To overcome this, we use the Transmit Descriptor first flag to indicates
that a packet should be the first packet (from a queue) in a cycle
according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle
in Intel Discrete I225/6 User Manual.
But this only works if there was any packet from that queue during the
current cycle, to avoid this issue, we issue an empty packet if that's
not the case. Also require one more descriptor to be available, to take
into account the empty packet that might be issued.
Test Setup:
Talker: Use l2_tai to generate the launchtime into packet load.
Listener: Use timedump.c to compute the delta between packet arrival
and LaunchTime packet payload.
Test Result:
Before:
1666000610127300000,1666000610127300096,96,621273
1666000610127400000,1666000610127400192,192,621274
1666000610127500000,1666000610127500032,32,621275
1666000610127600000,1666000610127600128,128,621276
1666000610127700000,1666000610127700224,224,621277
1666000610127800000,1666000610127800064,64,621278
1666000610127900000,1666000610127900160,160,621279
1666000610128000000,1666000610128000000,0,621280
1666000610128100000,1666000610128100096,96,621281
1666000610128200000,1666000610128200192,192,621282
1666000610128300000,1666000610128300032,32,621283
1666000610128400000,1666000610128301056,-98944,621284
1666000610128500000,1666000610128302080,-197920,621285
1666000610128600000,1666000610128302848,-297152,621286
1666000610128700000,1666000610128303872,-396128,621287
1666000610128800000,1666000610128304896,-495104,621288
1666000610128900000,1666000610128305664,-594336,621289
1666000610129000000,1666000610128306688,-693312,621290
1666000610129100000,1666000610128307712,-792288,621291
1666000610129200000,1666000610128308480,-891520,621292
1666000610129300000,1666000610128309504,-990496,621293
1666000610129400000,1666000610128310528,-1089472,621294
1666000610129500000,1666000610128311296,-1188704,621295
1666000610129600000,1666000610128312320,-1287680,621296
1666000610129700000,1666000610128313344,-1386656,621297
1666000610129800000,1666000610128314112,-1485888,621298
1666000610129900000,1666000610128315136,-1584864,621299
1666000610130000000,1666000610128316160,-1683840,621300
1666000610130100000,1666000610128316928,-1783072,621301
1666000610130200000,1666000610128317952,-1882048,621302
1666000610130300000,1666000610128318976,-1981024,621303
1666000610130400000,1666000610128319744,-2080256,621304
1666000610130500000,1666000610128320768,-2179232,621305
1666000610130600000,1666000610128321792,-2278208,621306
1666000610130700000,1666000610128322816,-2377184,621307
1666000610130800000,1666000610128323584,-2476416,621308
1666000610130900000,1666000610128324608,-2575392,621309
1666000610131000000,1666000610128325632,-2674368,621310
1666000610131100000,1666000610128326400,-2773600,621311
1666000610131200000,1666000610128327424,-2872576,621312
1666000610131300000,1666000610128328448,-2971552,621313
1666000610131400000,1666000610128329216,-3070784,621314
1666000610131500000,1666000610131500032,32,621315
1666000610131600000,1666000610131600128,128,621316
1666000610131700000,1666000610131700224,224,621317
After:
1666073510646200000,1666073510646200064,64,2676462
1666073510646300000,1666073510646300160,160,2676463
1666073510646400000,1666073510646400256,256,2676464
1666073510646500000,1666073510646500096,96,2676465
1666073510646600000,1666073510646600192,192,2676466
1666073510646700000,1666073510646700032,32,2676467
1666073510646800000,1666073510646800128,128,2676468
1666073510646900000,1666073510646900224,224,2676469
1666073510647000000,1666073510647000064,64,2676470
1666073510647100000,1666073510647100160,160,2676471
1666073510647200000,1666073510647200256,256,2676472
1666073510647300000,1666073510647300096,96,2676473
1666073510647400000,1666073510647400192,192,2676474
1666073510647500000,1666073510647500032,32,2676475
1666073510647600000,1666073510647600128,128,2676476
1666073510647700000,1666073510647700224,224,2676477
1666073510647800000,1666073510647800064,64,2676478
1666073510647900000,1666073510647900160,160,2676479
1666073510648000000,1666073510648000000,0,2676480
1666073510648100000,1666073510648100096,96,2676481
1666073510648200000,1666073510648200192,192,2676482
1666073510648300000,1666073510648300032,32,2676483
1666073510648400000,1666073510648400128,128,2676484
1666073510648500000,1666073510648500224,224,2676485
1666073510648600000,1666073510648600064,64,2676486
1666073510648700000,1666073510648700160,160,2676487
1666073510648800000,1666073510648800000,0,2676488
1666073510648900000,1666073510648900096,96,2676489
1666073510649000000,1666073510649000192,192,2676490
1666073510649100000,1666073510649100032,32,2676491
1666073510649200000,1666073510649200128,128,2676492
1666073510649300000,1666073510649300224,224,2676493
1666073510649400000,1666073510649400064,64,2676494
1666073510649500000,1666073510649500160,160,2676495
1666073510649600000,1666073510649600000,0,2676496
1666073510649700000,1666073510649700096,96,2676497
1666073510649800000,1666073510649800192,192,2676498
1666073510649900000,1666073510649900032,32,2676499
1666073510650000000,1666073510650000128,128,2676500
Fixes: 82faa9b799 ("igc: Add support for ETF offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Co-developed-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Co-developed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Malli C <mallikarjuna.chilakala@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e43039a49 ]
There is a memory leaks reported by kmemleak:
unreferenced object 0xffff888116111000 (size 2048):
comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s)
hex dump (first 32 bytes):
00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................
08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff827e20ee>] phy_device_create+0x4e/0x90
[<ffffffff827e6072>] get_phy_device+0xd2/0x220
[<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0
[<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0
[<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040]
...
The problem occurs in probe process as follows:
r6040_init_one:
mdiobus_register
mdiobus_scan <- alloc and register phy_device,
the reference count of phy_device is 3
r6040_mii_probe
phy_connect <- connect to the first phy_device,
so the reference count of the first
phy_device is 4, others are 3
register_netdev <- fault inject succeeded, goto error handling path
// error handling path
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
mdiobus_free(lp->mii_bus); <- the reference count of the first
phy_device is 1, it is not released
and other phy_devices are released
// similarly, the remove process also has the same problem
The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.
Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully.
Fixes: 3831861b4a ("r6040: implement phylib")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221213125614.927754-1-lizetao1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ff8bff704 ]
There is a race resulting in alive SOCK_SEQPACKET socket
may change its state from TCP_ESTABLISHED to TCP_CLOSE:
unix_release_sock(peer) unix_dgram_sendmsg(sk)
sock_orphan(peer)
sock_set_flag(peer, SOCK_DEAD)
sock_alloc_send_pskb()
if !(sk->sk_shutdown & SEND_SHUTDOWN)
OK
if sock_flag(peer, SOCK_DEAD)
sk->sk_state = TCP_CLOSE
sk->sk_shutdown = SHUTDOWN_MASK
After that socket sk remains almost normal: it is able to connect, listen, accept
and recvmsg, while it can't sendmsg.
Since this is the only possibility for alive SOCK_SEQPACKET to change
the state in such way, we should better fix this strange and potentially
danger corner case.
Note, that we will return EPIPE here like this is normally done in sock_alloc_send_pskb().
Originally used ECONNREFUSED looks strange, since it's strange to return
a specific retval in dependence of race in kernel, when user can't affect on this.
Also, move TCP_CLOSE assignment for SOCK_DGRAM sockets under state lock
to fix race with unix_dgram_connect():
unix_dgram_connect(other) unix_dgram_sendmsg(sk)
unix_peer(sk) = NULL
unix_state_unlock(sk)
unix_state_double_lock(sk, other)
sk->sk_state = TCP_ESTABLISHED
unix_peer(sk) = other
unix_state_double_unlock(sk, other)
sk->sk_state = TCP_CLOSED
This patch fixes both of these races.
Fixes: 83301b5367 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too")
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Link: https://lore.kernel.org/r/135fda25-22d5-837a-782b-ceee50e19844@ya.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f28157778 ]
Fix a slab-out-of-bounds read that occurs in nla_put() called from
nfc_genl_send_target() when target->sensb_res_len, which is duplicated
from an nfc_target in pn533, is too large as the nfc_target is not
properly initialized and retains garbage values. Clear nfc_targets with
memset() before they are used.
Found by a modified version of syzkaller.
BUG: KASAN: slab-out-of-bounds in nla_put
Call Trace:
memcpy
nla_put
nfc_genl_dump_targets
genl_lock_dumpit
netlink_dump
__netlink_dump_start
genl_family_rcv_msg_dumpit
genl_rcv_msg
netlink_rcv_skb
genl_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
Fixes: 673088fb42 ("NFC: pn533: Send ATR_REQ directly for active device detection")
Fixes: 361f3cb7f9 ("NFC: DEP link hook implementation for pn533")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221214015139.119673-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 628050ec95 ]
Before enetc_clean_rx_ring_xdp() calls xdp_do_redirect(), each software
BD in the RX ring between index orig_i and i can have one of 2 refcount
values on its page.
We are the owner of the current buffer that is being processed, so the
refcount will be at least 1.
If the current owner of the buffer at the diametrically opposed index
in the RX ring (i.o.w, the other half of this page) has not yet called
kfree(), this page's refcount could even be 2.
enetc_page_reusable() in enetc_flip_rx_buff() tests for the page
refcount against 1, and [ if it's 2 ] does not attempt to reuse it.
But if enetc_flip_rx_buff() is put after the xdp_do_redirect() call,
the page refcount can have one of 3 values. It can also be 0, if there
is no owner of the other page half, and xdp_do_redirect() for this
buffer ran so far that it triggered a flush of the devmap/cpumap bulk
queue, and the consumers of those bulk queues also freed the buffer,
all by the time xdp_do_redirect() returns the execution back to enetc.
This is the reason why enetc_flip_rx_buff() is called before
xdp_do_redirect(), but there is a big flaw with that reasoning:
enetc_flip_rx_buff() will set rx_swbd->page = NULL on both sides of the
enetc_page_reusable() branch, and if xdp_do_redirect() returns an error,
we call enetc_xdp_free(), which does not deal gracefully with that.
In fact, what happens is quite special. The page refcounts start as 1.
enetc_flip_rx_buff() figures they're reusable, transfers these
rx_swbd->page pointers to a different rx_swbd in enetc_reuse_page(), and
bumps the refcount to 2. When xdp_do_redirect() later returns an error,
we call the no-op enetc_xdp_free(), but we still haven't lost the
reference to that page. A copy of it is still at rx_ring->next_to_alloc,
but that has refcount 2 (and there are no concurrent owners of it in
flight, to drop the refcount). What really kills the system is when
we'll flip the rx_swbd->page the second time around. With an updated
refcount of 2, the page will not be reusable and we'll really leak it.
Then enetc_new_page() will have to allocate more pages, which will then
eventually leak again on further errors from xdp_do_redirect().
The problem, summarized, is that we zeroize rx_swbd->page before we're
completely done with it, and this makes it impossible for the error path
to do something with it.
Since the packet is potentially multi-buffer and therefore the
rx_swbd->page is potentially an array, manual passing of the old
pointers between enetc_flip_rx_buff() and enetc_xdp_free() is a bit
difficult.
For the sake of going with a simple solution, we accept the possibility
of racing with xdp_do_redirect(), and we move the flip procedure to
execute only on the redirect success path. By racing, I mean that the
page may be deemed as not reusable by enetc (having a refcount of 0),
but there will be no leak in that case, either.
Once we accept that, we have something better to do with buffers on
XDP_REDIRECT failure. Since we haven't performed half-page flipping yet,
we won't, either (and this way, we can avoid enetc_xdp_free()
completely, which gives the entire page to the slab allocator).
Instead, we'll call enetc_xdp_drop(), which will recycle this half of
the buffer back to the RX ring.
Fixes: 9d2b68cc10 ("net: enetc: add support for XDP_REDIRECT")
Suggested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221213001908.2347046-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87091063df ]
This tests that we return errors as documented, and also that the kfunc
calls work from both XDP and TC hooks.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: a8dfde09c9 ("selftests/bpf: Select CONFIG_FUNCTION_ERROR_INJECTION")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64dc8c732f ]
Our test report a uaf for 'bfqq->bic' in 5.10:
==================================================================
BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30
CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014
Call Trace:
bfq_select_queue+0x378/0xa30
bfq_dispatch_request+0xe8/0x130
blk_mq_do_dispatch_sched+0x62/0xb0
__blk_mq_sched_dispatch_requests+0x215/0x2a0
blk_mq_sched_dispatch_requests+0x8f/0xd0
__blk_mq_run_hw_queue+0x98/0x180
__blk_mq_delay_run_hw_queue+0x22b/0x240
blk_mq_run_hw_queue+0xe3/0x190
blk_mq_sched_insert_requests+0x107/0x200
blk_mq_flush_plug_list+0x26e/0x3c0
blk_finish_plug+0x63/0x90
__iomap_dio_rw+0x7b5/0x910
iomap_dio_rw+0x36/0x80
ext4_dio_read_iter+0x146/0x190 [ext4]
ext4_file_read_iter+0x1e2/0x230 [ext4]
new_sync_read+0x29f/0x400
vfs_read+0x24e/0x2d0
ksys_read+0xd5/0x1b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Commit 3bc5e683c6 ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic.
Fixes: 3bc5e683c6 ("bfq: Split shared queues on move between cgroups")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221214030430.3304151-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1232946cf5 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
skb_queue_purge() is called under spin_lock_irqsave() in handle_dmsg()
and hfcm_l1callback(), kfree_skb() is called in them, to fix this, use
skb_queue_splice_init() to move the dch->squeue to a free queue, also
enqueue the tx_skb and rx_skb, at last calling __skb_queue_purge() to
free the SKBs afer unlock.
Fixes: af69fb3a8f ("Add mISDN HFC multiport driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0f596bd75 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
skb_queue_purge() is called under spin_lock_irqsave() in hfcpci_l2l1D(),
kfree_skb() is called in it, to fix this, use skb_queue_splice_init()
to move the dch->squeue to a free queue, also enqueue the tx_skb and
rx_skb, at last calling __skb_queue_purge() to free the SKBs afer unlock.
Fixes: 1700fe1a10 ("Add mISDN HFC PCI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddc9648db1 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
skb_queue_purge() is called under spin_lock_irqsave() in hfcusb_l2l1D(),
kfree_skb() is called in it, to fix this, use skb_queue_splice_init()
to move the dch->squeue to a free queue, also enqueue the tx_skb and
rx_skb, at last calling __skb_queue_purge() to free the SKBs afer unlock.
In tx_iso_complete(), dev_kfree_skb() is called to consume the transmitted
SKB, so replace it with dev_consume_skb_irq().
Fixes: 69f52adb2d ("mISDN: Add HFC USB driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b4a00f0f ]
Currently macsec offload selection update routine accesses
the net device prior to holding the relevant lock.
Fix by holding the lock prior to the device access.
Fixes: dcb780fb27 ("net: macsec: add nla support for changing the offloading selection")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90cd5c8883 ]
The pic32_rtc_enable(pdata, 0) and clk_disable_unprepare(pdata->clk)
should be called in the error handling of devm_rtc_allocate_device(),
so we should move devm_rtc_allocate_device earlier in pic32_rtc_probe()
to fix it.
Fixes: 6515e23b9f ("rtc: pic32: convert to devm_rtc_allocate_device")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123015953.1998521-1-cuigaosheng1@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb733d7bd ]
The clk_disable_unprepare() should be called in the error handling
of clk_get_rate(), fix it.
Fixes: b5b2bdfc28 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123014805.1993052-1-cuigaosheng1@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb45f95ee ]
The for-loop was broken from the start. It translates to:
for (i = 0; i < 4; i += 4)
which means the loop statement is run only once, so only the highest
32-bit of the IPv6 address gets mangled.
Fix the loop increment.
Fixes: 0e07e25b48 ("netfilter: flowtable: fix NAT IPv6 offload mangling")
Fixes: 5c27d8d76c ("netfilter: nf_flow_table_offload: add IPv6 support")
Signed-off-by: Qingfang DENG <dqfext@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14f8c55d48 ]
In case of error, the function devm_regmap_init_i2c() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: 6b149f3310 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221125073626.1868229-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 915696927c ]
Maintaining a local driver data structure that is never shared
outside of the core device is an unnecessary complexity. Half of the
attributes were not used outside of a single function, one of which
was not used at all. The remaining 2 are generic and can be passed
around as required.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stable-dep-of: 14f8c55d48 ("mfd: pm8008: Fix return value check in pm8008_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36579aca87 ]
If an error occurs after the clk_prepare_enable() call, a corresponding
clk_disable_unprepare() should be called.
Simplify code and switch to devm_clk_get_enabled() to fix it.
Fixes: 3526403353 ("mfd: qcom_rpm: Handle message RAM clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e39752476d02605b2be46cab7115f71255ce13a8.1668949256.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85842c46fd ]
The BD957x driver uses REGMAP_IRQ but does not 'select' to depend on
it. This can cause build failures. Select REGMAP_IRQ for BD957X.
Fixes: 0e9692607f ("mfd: bd9576: Add IRQ support")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/Y3SdCWkRr1L64SWK@dc75zzyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aafbfa5f5 ]
rtas-error-log-max is not the name of an RTAS function, so rtas_token()
is not the appropriate API for retrieving its value. We already have
rtas_get_error_log_max() which returns a sensible value if the property
is absent for any reason, so use that instead.
Fixes: 8d633291b4 ("powerpc/eeh: pseries platform EEH error log retrieval")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop no-longer possible error handling as noticed by ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-6-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3def164a5c ]
slot_errbuf_lock has declared and initialized by DEFINE_SPINLOCK,
so we don't need to spin_lock_init again, drop it.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1652232476-9696-1-git-send-email-baihaowen@meizu.com
Stable-dep-of: 9aafbfa5f5 ("powerpc/pseries/eeh: use correct API for error log size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38e7d9c192 ]
The pointer node is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: b9e718e950 ("remoteproc: Introduce Qualcomm ADSP PIL")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221203070639.15128-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f360e2b275 ]
q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may
fail and return NULL. devm_ioremap() will use res->start as input, which
may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes: 0af65b9b91 ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125021641.29392-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e01ce676aa ]
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it.
Fixes: 027045a6e2 ("remoteproc: qcom: Add shutdown-ack irq")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221129105650.1539187-1-cuigaosheng1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa3c668f2f ]
According to MT7622 Reference Manual for Development Board v1.0 the PWM
unit found in the MT7622 SoC also comes with the PWM_CK_26M_SEL register
at offset 0x210 just like other modern MediaTek ARM64 SoCs.
And also MT7622 sets that register to 0x00000001 on reset which is
described as 'Select 26M fix CLK as BCLK' in the datasheet.
Hence set has_ck_26m_sel to true also for MT7622 which results in the
driver writing 0 to the PWM_CK_26M_SEL register which is described as
'Select bus CLK as BCLK'.
Fixes: 0c0ead7623 ("pwm: mediatek: Always use bus clock")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/Y1iF2slvSblf6bYK@makrotopia.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b5ef3429d ]
In the original mtk_disp_pwm_get_state() function wrongly uses bit 0 of
CON0 to judge if the PWM is enabled.
However that is indicated by a bit (at a machine dependent position) in
the DISP_PWM_EN register. Fix this accordingly.
Fixes: 3f2b167349 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: xinlei lee <xinlei.lee@mediatek.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/1666172538-11652-1-git-send-email-xinlei.lee@mediatek.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45558b3abb ]
As was documented in commit 0f02f491b7 ("pwm: sifive: Reduce time the
controller lock is held") a caller of pwm_sifive_update_clock() must
hold the mutex. So fix pwm_sifive_clock_notifier() to grab the lock.
While this necessity was only documented later, the race exists since
the driver was introduced.
Fixes: 9e37a53eb0 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20221018061656.1428111-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef5bb8e7a7 ]
This driver treats IOMMU_DOMAIN_IDENTITY the same as UNMANAGED, which
cannot possibly be correct.
UNMANAGED domains are required to start out blocking all DMAs. This seems
to be what this driver does as it allocates a first level 'dt' for the IO
page table that is 0 filled.
Thus UNMANAGED looks like a working IO page table, and so IDENTITY must be
a mistake. Remove it.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-97f0adf27b5e+1f0-s50_identity_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f4ab7da90 ]
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c90 ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f7c1d2a4 ]
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpci events were deprecated for platform firmware that
supports counter_info_version 0x8 or above.
Fix the hv_gpci event list by adding a new attribute group
called "hv_gpci_event_attrs_v6" and a "ENABLE_EVENTS_COUNTERINFO_V6"
macro to enable these events for platform firmware
that supports counter_info_version 0x6 or below. And assigning
the hv_gpci event list based on output counter info version
of underlying plaform.
Fixes: 97bf264018 ("powerpc/perf/hv-gpci: add the remaining gpci requests")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221130174513.87501-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d0eea4152 ]
If platform_device_add() is not called or failed, it can not call
platform_device_del() to clean up memory, it should call
platform_device_put() in error case.
Fixes: 26f6cb9993 ("[POWERPC] fsl_soc: add support for fsl_spi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32c5209214 ]
The interrupt frame detection and loads from the hypothetical pt_regs
are not bounds-checked. The next-frame validation only bounds-checks
STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another
test for this.
The user could set r1 to be equal to the address matching the first
interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page
due to the kernel redzone, and induce the kernel to load the marker from
there. Possibly this could cause a crash at least. If the user could
induce the previous page to contain a valid marker, then it might be
able to direct perf to read specific memory addresses in a way that
could be transmitted back to the user in the perf data.
Fixes: 20002ded4d ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b49670f3b ]
If remapping 'data->trig_page' fails, the 'data->eoi_mmio' need be unmapped
before returning from xive_spapr_populate_irq_data().
Fixes: eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221017032333.1852406-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c4a4a4c84 ]
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
1529 | int mode;
| ^~~~
Fixes: 09b6c1129f ("powerpc/xmon: Fix compile error with PPC_8xx=y")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d09697ff2 ]
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
This function only calls of_node_put() in normal path,
missing it in the error path.
Add missing of_node_put() to avoid refcount leak.
Fixes: f24be42aab ("cxl: Add psl9 specific code")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605060038.62217-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5836947613 ]
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().
Add the missing call, as already done in the remove function.
Fixes: 3c9059d79f ("powerpc/5200: add LocalPlus bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dec1496d46ccd5311d0f6e9f9ca4238be11bf6a6.1643440531.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbaa310573 ]
The function ioremap() in macio_init() can fail, so its return value
should be checked.
Fixes: 36874579db ("[PATCH] powerpc: macio-adb build fix")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802074148.3213659-1-studentxswpy@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
