Change the places in fs/ext4/mballoc.c where EXT4_BLOCKS_PER_GROUP are
used to indicate the number of bits in a block bitmap (which is really
a cluster allocation bitmap in bigalloc file systems). There are
still some places in the ext4 codebase where usage of
EXT4_BLOCKS_PER_GROUP needs to be audited/fixed, in code paths that
aren't used given the initial restricted assumptions for bigalloc.
These will need to be fixed before we can relax those restrictions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_mb_init(), if the s_locality_group allocation fails it will
currently cause the allocations made in ext4_mb_init_backend() to
be leaked. Moving the ext4_mb_init_backend() allocation after the
s_locality_group allocation avoids that problem.
Signed-off-by: Yu Jian <yujian@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rename mb_set_bits() to ext4_set_bits() and make it a global function
so that setup_new_group_blocks() can use it.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If ext4_group_add_blocks() is called with 0 block, make it return 0
without doing any extra work.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch lets ext4_group_add_blocks() return an error code if it
fails, so that upper functions can handle error correctly.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_mb_release, we use s_mb_buddies_generated++. Although
the output is OK, but I don't think we need this extra ++.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_mb_load_buddy() calls ext4_get_group_info() for setting both
"grp" and "e4b->bd_info", but it could do "e4b->bd_info = grp".
Reported-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously, if a stripe width was provided, then it would be used
as the preallocation granularity, with no santiy checking and no
way to override this. Now, mb_prealloc_size defaults to the smallest
multiple of stripe size that is greater than or equal to the old
default mb_prealloc_size, and this can be overridden with the sysfs
interface.
Signed-off-by: Dan Ehrenberg <dehrenberg@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we meet with an error in ext4_mb_add_groupinfo, we kfree
sbi->s_group_info[group >> EXT4_DESC_PER_BLOCK_BITS(sb)], but fail to
reset it to NULL. So the caller ext4_mb_init_backend will try to kfree
it again and causes a double free. So fix it by resetting it to NULL.
Some typo in comments of mballoc.c are also changed.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_groupinfo_create_slab, we create ext4_groupinfo_caches within
ext4_grpinfo_slab_create_mutex, but set it outside the lock, and there
does exist some case that we may create it twice and causes a memory
leak. So set it before we call mutex_unlock.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
at ext4_trim_all_free() comment, there is no longer an @e4b parameter,
instead it is @group.
Reported-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4, when FITRIM is called every time, we iterate all the
groups and do trim one by one. It is a bit time wasting if the
group has been trimmed and there is no change since the last
trim.
So this patch adds a new flag in ext4_group_info->bb_state to
indicate that the group has been trimmed, and it will be cleared
if some blocks is freed(in release_blocks_on_commit). Another
trim_minlen is added in ext4_sb_info to record the last minlen
we use to trim the volume, so that if the caller provide a small
one, we will go on the trim regardless of the bb_state.
A simple test with my intel x25m ssd:
df -h shows:
/dev/sdb1 40G 21G 17G 56% /mnt/ext4
Block size: 4096
run the FITRIM with the following parameter:
range.start = 0;
range.len = UINT64_MAX;
range.minlen = 1048576;
without the patch:
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m5.505s
user 0m0.000s
sys 0m1.224s
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m5.359s
user 0m0.000s
sys 0m1.178s
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m5.228s
user 0m0.000s
sys 0m1.151s
with the patch:
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m5.625s
user 0m0.000s
sys 0m1.269s
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m0.002s
user 0m0.000s
sys 0m0.001s
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m0.002s
user 0m0.000s
sys 0m0.001s
A big improvement for the 2nd and 3rd run.
Even after I delete some big image files, it is still much
faster than iterating the whole disk.
[root@boyu-tm test]# time ./ftrim /mnt/ext4/a
real 0m1.217s
user 0m0.000s
sys 0m0.196s
Cc: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we trim some free blocks in a group of ext4, we need to
calculate the free blocks properly and check whether there are
enough freed blocks left for us to trim. Current solution will
only calculate free spaces if they are large for a trim which
isn't appropriate.
Let us see a small example:
a group has 1.5M free which are 300k, 300k, 300k, 300k, 300k.
And minblocks is 1M. With current solution, we have to iterate
the whole group since these 300k will never be subtracted from
1.5M. But actually we should exit after we find the first 2
free spaces since the left 3 chunks only sum up to 900K if we
subtract the first 600K although they can't be trimed.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In 0f0a25b, we adjust 'len' with s_first_data_block - start, but
it could underflow in case blocksize=1K, fstrim_range.len=512 and
fstrim_range.start = 0. In this case, when we run the code:
len -= first_data_blk - start; len will be underflow to -1ULL.
In the end, although we are safe that last_group check later will limit
the trim to the whole volume, but that isn't what the user really want.
So this patch fix it. It also adds the check for 'start' like ext3 so that
we can break immediately if the start is invalid.
Cc: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The current implementation of ext4_free_blocks() always calls
dquot_free_block This looks quite sensible in the most cases: blocks
to be freed are associated with inode and were accounted in quota and
i_blocks some time ago.
However, there is a case when blocks to free were not accounted by the
time calling ext4_free_blocks() yet:
1. delalloc is on, write_begin pre-allocated some space in quota
2. write-back happens, ext4 allocates some blocks in ext4_ext_map_blocks()
3. then ext4_ext_map_blocks() gets an error (e.g. ENOSPC) from
ext4_ext_insert_extent() and calls ext4_free_blocks().
In this scenario, ext4_free_blocks() calls dquot_free_block() who, in
turn, decrements i_blocks for blocks which were not accounted yet (due
to delalloc) After clean umount, e2fsck reports something like:
> Inode 21, i_blocks is 5080, should be 5128. Fix<y>?
because i_blocks was erroneously decremented as explained above.
The patch fixes the problem by passing the new flag
EXT4_FREE_BLOCKS_NO_QUOT_UPDATE to ext4_free_blocks(), to request
that the dquot_free_block() call be skipped.
Signed-off-by: Maxim Patlasov <maxim.patlasov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
While creating fixed tracepoints for ext3, basically by porting them
from ext4, I found a lot of useless retyping, wrong type usage, useless
variable passing and other inconsistencies in the ext4 fixed tracepoint
code.
This patch cleans the fixed tracepoint code for ext4 and also simplify
some of them.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
metadata is not parameter of ext4_free_blocks() any more.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds an allocation request flag to the ext4_has_free_blocks
function which enables the use of reserved blocks. This will allow a
punch hole to proceed even if the disk is full. Punching a hole may
require additional blocks to first split the extents.
Because ext4_has_free_blocks is a low level function, the flag needs
to be passed down through several functions listed below:
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
ext4_ext_split
ext4_ext_new_meta_block
ext4_mb_new_blocks
ext4_claim_free_blocks
ext4_has_free_blocks
[ext4 punch hole patch series 1/5 v7]
Signed-off-by: Allison Henderson <achender@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
We should protect reading bd_info->bb_first_free with the group lock
because otherwise we might miss some free blocks. This is not a big deal
at all, but the change to do right thing is really simple, so lets do
that.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently we are loading buddy ext4_mb_load_buddy() for every block
group we are going through in ext4_trim_fs() in many cases just to find
out that there is not enough space to be bothered with. As Amir Goldstein
suggested we can use bb_free information directly from ext4_group_info.
This commit removes ext4_mb_load_buddy() from ext4_trim_fs() and rather
get the ext4_group_info via ext4_get_group_info() and use the bb_free
information directly from that. This avoids unnecessary call to load
buddy in the case the group does not have enough free space to trim.
Loading buddy is now moved to ext4_trim_all_free().
Tested by me with xfstests 251.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After taking care of all group init races, all that remains is to
remove alloc_semp from ext4_allocation_context and ext4_buddy structs.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After online resize which adds new groups, some of the groups
in a buddy page may be initialized and uptodate, while other
(new ones) may be uninitialized.
The indication for init of new block groups is when ext4_mb_init_cache()
is called with an uptodate buddy page. In this case, initialized groups
on that buddy page must be skipped when initializing the buddy cache.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The old routines ext4_mb_[get|put]_buddy_cache_lock(), which used
to take grp->alloc_sem for all groups on the buddy page have been
replaced with the routines ext4_mb_[get|put]_buddy_page_lock().
The new routines take both buddy and bitmap page locks to protect
against concurrent init of groups on the same buddy page.
The GROUP_NEED_INIT flag is tested again under page lock to check
if the group was initialized by another caller.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The old imlementation used to take grp->alloc_sem and set the
GROUP_NEED_INIT flag, so that the buddy cache would be reloaded.
The new implementation updates the buddy cache by freeing the added
blocks and making them available for use, so there is no need to
reload the buddy cache and there is no need to take grp->alloc_sem.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The block allocation code used to use jbd2_journal_get_undo_access as
a way to make changes that wouldn't show up until the commit took
place. The new multi-block allocation code has a its own way of
preventing newly freed blocks from getting reused until the commit
takes place (it avoids updating the buddy bitmaps until the commit is
done), so we don't need to use jbd2_journal_get_undo_access(), which
has extra overhead compared to jbd2_journal_get_write_access().
There was one last vestigal use of ext4_journal_get_undo_access() in
ext4_add_groupblocks(); change it to use ext4_journal_get_write_access()
and then remove the ext4_journal_get_undo_access() support.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In preparation for the next patch, the function ext4_add_groupblocks()
is moved to mballoc.c, where it could use some static functions.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is an effective revert of commit a30eec2a8: "ext4: stop issuing
discards if not supported by device". The problem is that there are
some devices that may return errors in response to a discard request
some times but not others. (One example would be a hybrid dm device
which concatenates an SSD and an HDD device).
By this logic, I also removed the error checking from ext4's FITRIM
code; so that an error from a discard will not stop the FITRIM from
trying to trim the rest of the file system.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add missing page_cache_release in the error path of ext4_mb_load_buddy
Signed-off-by: Yang Ruirui <ruirui.r.yang@tieto.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
We can call kfree on uninitialized members of the s_group_info array
on an the error path. We can avoid this by kzalloc'ing the array.
This doesn't entirely solve the oops on mount if we fail down this
path; failed_mount4: frees the sbi, for one, which gets referenced
later in the failed mount paths - I haven't worked that out yet.
https://bugzilla.kernel.org/show_bug.cgi?id=30872
Reported-by: Eugene A. Shatokhin <dame_eugene@mail.ru>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If CONFIG_EXT4_DEBUG is enabled, then if a block allocation fails due
to disk being full, a verbose debugging message is printed, even if
the malloc-debug switch has not been enabled. Suppress the debugging
message so that nothing is printed unless malloc-debug has been turned
on.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_mb_check_group_pa(), the current preallocation space is
replaced with a new preallocation space when the two have the same
distance from the goal block.
This doesn't actually gain us anything, so change things so that the
function only switches to the new preallocation group if its distance
from the goal block is strictly smaller than the current preallocaiton
group's distance from the goal block.
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds comments to ext4_mb_mark_free_simple to make it more
understandable.
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Cc: Alex Tomas <alex@clusterfs.com>
Cc: Theodore Tso <tytso@google.com>
In __mb_check_buddy(), look at the code below:
591 fstart = -1;
592 buddy = mb_find_buddy(e4b, 0, &max);
593 for (i = 0; i < max; i++) {
594 if (!mb_test_bit(i, buddy)) {
595 MB_CHECK_ASSERT(i >= e4b->bd_info->bb_first_free);
596 if (fstart == -1) {
597 fragments++;
598 fstart = i;
599 }
600 continue;
601 }
602 fstart = -1;
603 /* check used bits only */
604 for (j = 0; j < e4b->bd_blkbits + 1; j++) {
605 buddy2 = mb_find_buddy(e4b, j, &max2);
606 k = i >> j;
607 MB_CHECK_ASSERT(k < max2);
608 MB_CHECK_ASSERT(mb_test_bit(k, buddy2));
609 }
610 }
611 MB_CHECK_ASSERT(!EXT4_MB_GRP_NEED_INIT(e4b->bd_info));
612 MB_CHECK_ASSERT(e4b->bd_info->bb_fragments == fragments);
613
614 grp = ext4_get_group_info(sb, e4b->bd_group);
615 buddy = mb_find_buddy(e4b, 0, &max);
On line 592, buddy is fetched by mb_find_buddy() with order 0, between
line 593 to line 615, buddy is not changed, therefore there is
no need to fetch buddy again from mb_find_buddy() with order 0 again.
We can safely remove the second mb_find_buddy() on line 615.
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Cc: Alex Tomas <alex@clusterfs.com>
Cc: Theodore Tso <tytso@google.com>
Current code calculate max no matter whether order is zero, it's
unnecessary. This cleanup patch sets max to "1 << (e4b->bd_blkbits
+ 3)" only when order == 0.
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Cc: Alex Tomas <alex@clusterfs.com>
Cc: Theodore Tso <tytso@google.com>
In 2.6.37 I was running into oopses with repeated module
loads & unloads. I tracked this down to:
fb1813f4 ext4: use dedicated slab caches for group_info structures
(this was in addition to the features advert unload problem)
The kstrdup & subsequent kfree of the cache name was causing
a double free. In slub, at least, if I read it right it allocates
& frees the name itself, slab seems to do something different...
so in slub I think we were leaking -our- cachep->name, and double
freeing the one allocated by slub.
After getting lost in slab/slub/slob a bit, I just looked at other
sized-caches that get allocated. jbd2, biovec, sgpool all do it
more or less the way jbd2 does. Below patch follows the jbd2
method of dynamically allocating a cache at mount time from
a list of static names.
(This might also possibly fix a race creating the caches with
parallel mounts running).
[Folded in a fix from Dan Carpenter which fixed an off-by-one error in
the original patch]
Cc: stable@kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When s_first_data_block is not zero (which happens e.g. when block size is 1KB)
and trim ioctl is called to start trimming from block 0, the math in
ext4_get_group_no_and_offset() overflows. The overall result is that ioctl
returns EINVAL which is kind of unexpected and we probably don't want
userspace tools to bother with internal details of filesystem structure.
So just silently increase starting offset (and shorten length) when starting
block is below s_first_data_block.
CC: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function was never implemented, except for a BUG_ON which was
tripping when ext4 is run without a journal. The problem is that
although the comment asserts that "truncate (which is the only way to
free block) discards all preallocations", ext4_free_blocks() is also
called in various error recovery paths when blocks have been
allocated, but for various reasons, we were not able to use those data
blocks (for example, because we ran out of memory while trying to
manipulate the extent tree, or some other similar situation).
In addition to the fact that this function isn't implemented except
for the incorrect BUG_ON, the single caller of this function,
ext4_free_blocks(), doesn't use it all if the journal is enabled.
So remove the (stub) function entirely for now. If we decide it's
better to add it back, it's only going to be useful with a relatively
large number of code changes anyway.
Google-Bug-Id: 3236408
Cc: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When ext4_trim_fs() is called to trim a part of a single group, the
logic will wrongly set last block of the interval to 'len' instead
of 'first_block + len'. Thus a shorter interval is possibly trimmed.
Fix it.
CC: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Remove the short element i_delalloc_reserved_flag from the
ext4_inode_info structure and replace it a new bit in i_state_flags.
Since we have an ext4_inode_info for every ext4 inode cached in the
inode cache, any savings we can produce here is a very good thing from
a memory utilization perspective.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_issue_discard is supposed to be helper for calling discard, however
in case that underlying device does not support discard it prints out
the warning message and clears the DISCARD t_mount_opt flag. Since it
can be (and is) used by others, it should not do anything and let the
caller to handle the error case.
This commit removes warning message and flag setting from
ext4_issue_discard and use it just in place where it is really needed
(release_blocks_on_commit). FITRIM ioctl should not set any flags nor it
should print out warning messages, so get rid of the warning as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
When determining last group through ext4_get_group_no_and_offset() the
result may be wrong in cases when range->start and range-len are too
big, because it may overflow when summing up those two numbers.
Fix that by checking range->len and limit its value to
ext4_blocks_count(). This commit was tested by myself with expected
result.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Change clear_opt() and set_opt() to take a superblock pointer instead
of a pointer to EXT4_SB(sb)->s_mount_opt. This makes it easier for us
to support a second mount option field.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 5c521830cf (ext4: Support discard requests when running in
no-journal mode) attempts to add sb_issue_discard() for data blocks
(in data=writeback mode) and in no-journal mode. Unfortunately, this
no longer works, because in commit dd3932eddf (block: remove
BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous
interface, and there are times when we call ext4_free_blocks() when we
are are holding a spinlock, or are otherwise in an atomic context.
For now, I've removed the call to sb_issue_discard() to prevent a
deadlock or (if spinlock debugging is enabled) failures like this:
BUG: scheduling while atomic: rc.sysinit/1376/0x00000002
Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1
Call Trace:
[<ffffffff810397ce>] __schedule_bug+0x5e/0x70
[<ffffffff81403110>] schedule+0x950/0xa70
[<ffffffff81060bad>] ? insert_work+0x7d/0x90
[<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30
[<ffffffff81061127>] ? queue_work+0x37/0x60
[<ffffffff8140377d>] schedule_timeout+0x21d/0x360
[<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540
[<ffffffff81402680>] wait_for_common+0xc0/0x150
[<ffffffff81041490>] ? default_wake_function+0x0/0x10
[<ffffffff812034bc>] ? submit_bio+0x7c/0x100
[<ffffffff810680a0>] ? wake_bit_function+0x0/0x40
[<ffffffff814027b8>] wait_for_completion+0x18/0x20
[<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210
[<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60
[<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120
[<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70
[<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30
[<ffffffff81191618>] ext4_truncate+0x178/0x5d0
[<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280
[<ffffffff810d8976>] vmtruncate+0x56/0x70
[<ffffffff811925cb>] ext4_setattr+0x14b/0x460
[<ffffffff811319e4>] notify_change+0x194/0x380
[<ffffffff81117f80>] do_truncate+0x60/0x90
[<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20
[<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20
[<ffffffff81127539>] do_last+0x5d9/0x770
[<ffffffff811278bd>] do_filp_open+0x1ed/0x680
[<ffffffff8140644f>] ? page_fault+0x1f/0x30
[<ffffffff81132bfc>] ? alloc_fd+0xec/0x140
[<ffffffff81118db1>] do_sys_open+0x61/0x120
[<ffffffff81118e8b>] sys_open+0x1b/0x20
[<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b
https://bugzilla.kernel.org/show_bug.cgi?id=22302
Reported-by: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: jiayingz@google.com
These functions are only used within fs/ext4/mballoc.c, so move them
so they are used after they are defined, and then make them be static.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Walk through allocation groups and trim all free extents. It can be
invoked through FITRIM ioctl on the file system. The main idea is to
provide a way to trim the whole file system if needed, since some SSD's
may suffer from performance loss after the whole device was filled (it
does not mean that fs is full!).
It search for free extents in allocation groups specified by Byte range
start -> start+len. When the free extent is within this range, blocks
are marked as used and then trimmed. Afterwards these blocks are marked
as free in per-group bitmap.
Since fstrim is a long operation it is good to have an ability to
interrupt it by a signal. This was added by Dmitry Monakhov.
Thanks Dimitry.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use return value from sb_issue_discard() as return value in
ext4_issue_discard(). Since sb_issue_discard() may result in more
serious errors than just -EOPNOTSUPP it is worth to inform user of this
function about them to handle error cases properly.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fail block allocation if sb_getblk() returns NULL. In that case,
sb_find_get_block() also likely to fail so that it should skip
calling ext4_forget().
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also remove the SLAB_RECLAIM_ACCOUNT flag from the system zone kmem
cache. This slab tends to be fairly static, so it shouldn't be marked
as likely to have free pages that can be reclaimed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Many tracepoints were populating an ext4_allocation_context
to pass in, but this requires a slab allocation even when
tracepoints are off. In fact, 4 of 5 of these allocations
were only for tracing. In addition, we were only using a
small fraction of the 144 bytes of this structure for this
purpose.
We can do away with all these alloc/frees of the ac and
simply pass in the bits we care about, instead.
I tested this by turning on tracing and running through
xfstests on x86_64. I did not actually do anything with
the trace output, however.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We can't hold the block group spinlock because we ext4_issue_discard()
calls wait and hence can get rescheduled.
Google-Bug-Id: 3017678
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_group_info structures are currently allocated with kmalloc().
With a typical 4K block size, these are 136 bytes each -- meaning
they'll each consume a 256-byte slab object. On a system with many
ext4 large partitions, that's a lot of wasted kernel slab space.
(E.g., a single 1TB partition will have about 8000 block groups, using
about 2MB of slab, of which nearly 1MB is wasted.)
This patch creates an array of slab pointers created as needed --
depending on the superblock block size -- and uses these slabs to
allocate the group info objects.
Google-Bug-Id: 2980809
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves. For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We'll need to get rid of the BLKDEV_IFL_BARRIER flag, and to facilitate
that and to make the interface less confusing pass all flags explicitly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: Adding error check after calling ext4_mb_regular_allocator()
ext4: Fix dirtying of journalled buffers in data=journal mode
ext4: re-inline ext4_rec_len_(to|from)_disk functions
jbd2: Remove t_handle_lock from start_this_handle()
jbd2: Change j_state_lock to be a rwlock_t
jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
ext4: Add mount options in superblock
ext4: force block allocation on quota_off
ext4: fix freeze deadlock under IO
ext4: drop inode from orphan list if ext4_delete_inode() fails
ext4: check to make make sure bd_dev is set before dereferencing it
jbd2: Make barrier messages less scary
ext4: don't print scary messages for allocation failures post-abort
ext4: fix EFBIG edge case when writing to large non-extent file
ext4: fix ext4_get_blocks references
ext4: Always journal quota file modifications
ext4: Fix potential memory leak in ext4_fill_super
ext4: Don't error out the fs if the user tries to make a file too big
ext4: allocate stripe-multiple IOs on stripe boundaries
ext4: move aio completion after unwritten extent conversion
...
Fix up conflicts in fs/ext4/inode.c as per Ted.
Fix up xfs conflicts as per earlier xfs merge.
If the bitmap block on disk is bad, ext4_mb_load_buddy() returns an
error. This error is returned to the caller,
ext4_mb_regular_allocator() and then to ext4_mb_new_blocks(). But
ext4_mb_new_blocks() did not check for the return value of
ext4_mb_regular_allocator() and would repeatedly try to load the
bitmap block. The fix simply catches the return value and exits out of
the 'repeat' loop after cleanup.
We also take the opportunity to clean up the error handling in
ext4_mb_new_blocks().
Google-Bug-Id: 2853530
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I often get emails containing the "This should not happen!!" message,
conveniently trimmed to remove things like:
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 03 13 c9 70 00 00 28 00
end_request: I/O error, dev sda, sector 51628400
Aborting journal on device dm-0-8.
EXT4-fs error (device dm-0): ext4_journal_start_sb: Detected aborted journal
EXT4-fs (dm-0): Remounting filesystem read-only
I don't think there is any value to the verbosity if the reason is
due to a filesystem abort; it just obfuscates the root cause.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For some reason, today mballoc only allocates IOs which are exactly
stripe-sized on a stripe boundary. If you have a multiple (say, a
128k IO on a 64k stripe) you may end up unaligned.
It seems to me that a simple change to align stripe-multiple IOs
on stripe boundaries would be a very good idea, unless this breaks
some other mballoc heuristic for some reason...
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Issue discard request in ext4_free_blocks() when ext4 has no journal and
is mounted with discard option.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
No real bugs found, just removed some dead code.
Found by gcc 4.6's new warnings.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We don't need to set s_dirt in most of the ext4 code when journaling
is enabled. In ext3/4 some of the summary statistics for # of free
inodes, blocks, and directories are calculated from the per-block
group statistics when the file system is mounted or unmounted. As a
result the superblock doesn't have to be updated, either via the
journal or by setting s_dirt. There are a few exceptions, most
notably when resizing the file system, where the superblock needs to
be modified --- and in that case it should be done as a journalled
operation if possible, and s_dirt set only in no-journal mode.
This patch will optimize out some unneeded disk writes when using ext4
with a journal.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
At several places we modify EXT4_I(inode)->i_flags without holding
i_mutex (ext4_do_update_inode, ...). These modifications are racy and
we can lose updates to i_flags. So convert handling of i_flags to use
bitops which are atomic.
https://bugzilla.kernel.org/show_bug.cgi?id=15792
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix ext4_mb_collect_stats() to use the correct test for s_bal_success; it
should be testing "best-extent.fe_len >= orig-extent.fe_len" , not
"orig-extent.fe_len >= goal-extent.fe_len" .
Signed-off-by: Curt Wohlgemuth <curtw@google.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds a new field in ext4_group_info to cache the largest available
block range in a block group; and don't load the buddy pages until *after*
we've done a sanity check on the block group.
With large allocation requests (e.g., fallocate(), 8MiB) and relatively full
partitions, it's easy to have no block groups with a block extent large
enough to satisfy the input request length. This currently causes the loop
during cr == 0 in ext4_mb_regular_allocator() to load the buddy bitmap pages
for EVERY block group. That can be a lot of pages. The patch below allows
us to call ext4_mb_good_group() BEFORE we load the buddy pages (although we
have check again after we lock the block group).
Addresses-Google-Bug: #2578108
Addresses-Google-Bug: #2704453
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Turn off issuance of discard requests if the device does
not support it - similar to the action we take for barriers.
This will save a little computation time if a non-discardable
device is mounted with -o discard, and also makes it obvious
that it's not doing what was asked at mount time ...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function cleans up after ext4_mb_load_buddy(), so the renaming
makes the code clearer.
Signed-off-by: Jing Zhang <zj.barak@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Issue the discard operation *before* releasing the blocks to be reused
ext4: Fix buffer head leaks after calls to ext4_get_inode_loc()
ext4: Fix possible lost inode write in no journal mode
Otherwise, we can end up having data corruption because the blocks
could get reused and then discarded!
https://bugzilla.kernel.org/show_bug.cgi?id=15579
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
ext4 uses rb_node = NULL; to zero rb_root at few places. Using
RB_ROOT as the initializer is more portable in case the underlying
implementation of rbtrees changes in the future.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Eric Paris <eparis@redhat.com>
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.
Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not. Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
More cleanup to convert open-coded calculations of the first block
number of a free extent to use ext4_grp_offs_to_block() instead.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
This is a cleanup and simplification patch which takes some open-coded
calculations to calculate the first block number of a group and
converts them to use the (already defined) ext4_group_first_block_no()
function.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
The ext4 multiblock allocator decides whether to use group or file
preallocation based on the file size. When the file size reaches
s_mb_stream_request (default is 16 blocks), it changes to use a
file-specific preallocation. This is cool, but it has a tiny problem.
See a simple script:
mkfs.ext4 -b 1024 /dev/sda8 1000000
mount -t ext4 -o nodelalloc /dev/sda8 /mnt/ext4
for((i=0;i<5;i++))
do
cat /mnt/4096>>/mnt/ext4/a #4096 is a file with 4096 characters.
cat /mnt/4096>>/mnt/ext4/b
done
debuge4fs -R 'stat a' /dev/sda8|grep BLOCKS -A 1
And you get
BLOCKS:
(0-14):8705-8719, (15):2356, (16-19):8465-8468
So there are 3 extents, a bit strange for the lonely 15th logical
block. As we write to the 16 blocks, we choose file preallocation in
ext4_mb_group_or_file, but in ext4_mb_normalize_request, we meet with
the 16*1024 range, so no preallocation will be carried. file b then
reserves the space after '2356', so when when write 16, we start from
another part.
This patch just change the check in ext4_mb_group_or_file, so
that for the lonely 15 we will still use group preallocation.
After the patch, we will get:
debuge4fs -R 'stat a' /dev/sda8|grep BLOCKS -A 1
BLOCKS:
(0-15):8705-8720, (16-19):8465-8468
Looks more sane. Thanks.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Just a pet peeve of mine; we had a mishash of calls with either __func__
or "function_name" and the latter tends to get out of sync.
I think it's easier to just hide the __func__ in a macro, and it'll
be consistent from then on.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some misspelled occurences of 'octet' and some comments were also fixed
as I was on it.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
