We're going to extend this with further information which is only
relevant for prog array at this point. Given this info is not used
in critical path, move it into its own structure such that the main
array map structure can be kept on diet.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/b9ddccdb0f6f7026489ee955f16c96381e1e7238.1574452833.git.daniel@iogearbox.net
We later on are going to need a sleepable context as opposed to plain
RCU callback in order to untrack programs we need to poke at runtime
and tracking as well as image update is performed under mutex.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/09823b1d5262876e9b83a8e75df04cf0467357a4.1574452833.git.daniel@iogearbox.net
With latest llvm (trunk https://github.com/llvm/llvm-project),
test_progs, which has +alu32 enabled, failed for strobemeta.o.
The verifier output looks like below with edit to replace large
decimal numbers with hex ones.
193: (85) call bpf_probe_read_user_str#114
R0=inv(id=0)
194: (26) if w0 > 0x1 goto pc+4
R0_w=inv(id=0,umax_value=0xffffffff00000001)
195: (6b) *(u16 *)(r7 +80) = r0
196: (bc) w6 = w0
R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
197: (67) r6 <<= 32
R6_w=inv(id=0,smax_value=0x7fffffff00000000,umax_value=0xffffffff00000000,
var_off=(0x0; 0xffffffff00000000))
198: (77) r6 >>= 32
R6=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
...
201: (79) r8 = *(u64 *)(r10 -416)
R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0)
202: (0f) r8 += r6
R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
203: (07) r8 += 9696
R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
...
255: (bf) r1 = r8
R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
...
257: (85) call bpf_probe_read_user_str#114
R1 unbounded memory access, make sure to bounds check any array access into a map
The value range for register r6 at insn 198 should be really just 0/1.
The umax_value=0xffffffff caused later verification failure.
After jmp instructions, the current verifier already tried to use just
obtained information to get better register range. The current mechanism is
for 64bit register only. This patch implemented to tighten the range
for 32bit sub-registers after jmp32 instructions.
With the patch, we have the below range ranges for the
above code sequence:
193: (85) call bpf_probe_read_user_str#114
R0=inv(id=0)
194: (26) if w0 > 0x1 goto pc+4
R0_w=inv(id=0,smax_value=0x7fffffff00000001,umax_value=0xffffffff00000001,
var_off=(0x0; 0xffffffff00000001))
195: (6b) *(u16 *)(r7 +80) = r0
196: (bc) w6 = w0
R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0x1))
197: (67) r6 <<= 32
R6_w=inv(id=0,umax_value=0x100000000,var_off=(0x0; 0x100000000))
198: (77) r6 >>= 32
R6=inv(id=0,umax_value=1,var_off=(0x0; 0x1))
...
201: (79) r8 = *(u64 *)(r10 -416)
R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0)
202: (0f) r8 += r6
R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
203: (07) r8 += 9696
R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
...
255: (bf) r1 = r8
R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
...
257: (85) call bpf_probe_read_user_str#114
...
At insn 194, the register R0 has better var_off.mask and smax_value.
Especially, the var_off.mask ensures later lshift and rshift
maintains proper value range.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191121170650.449030-1-yhs@fb.com
Tetsuo pointed out that it was not only the device unregister hook that was
broken for devmap_hash types, it was also cleanup on map free. So better
fix this as well.
While we're at it, there's no reason to allocate the netdev_map array for
DEVMAP_HASH, so skip that and adjust the cost accordingly.
Fixes: 6f9d451ab1 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191121133612.430414-1-toke@redhat.com
Only the function calls are stubbed out with static inlines that always
fail. This is the standard way to write a header for an optional component
and makes it easier for drivers that only optionally need HMM_MIRROR.
Link: https://lore.kernel.org/r/20191112202231.3856-5-jgg@ziepe.ca
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This commit reverts commit 91e6015b08 ("bpf: Emit audit messages
upon successful prog load and unload") and its follow up commit
7599a896f2 ("audit: Move audit_log_task declaration under
CONFIG_AUDITSYSCALL") as requested by Paul Moore. The change needs
close review on linux-audit, tests etc.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Currently, a lot of memory is wasted for architectures like MIPS when
init_ftrace_syscalls() allocates the array for syscalls using kcalloc.
This is because syscalls numbers start from 4000, 5000 or 6000 and
array elements up to that point are unused.
Fix this by using a data structure more suited to storing sparsely
populated arrays. The XARRAY data structure, implemented using radix
trees, is much more memory efficient for storing the syscalls in
question.
Link: http://lkml.kernel.org/r/20191115234314.21599-1-hnaveed@wavecomp.com
Signed-off-by: Hassan Naveed <hnaveed@wavecomp.com>
Reviewed-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding 2 new functions -
1) struct trace_array *trace_array_get_by_name(const char *name);
Return pointer to a trace array with given name. If it does not exist,
create and return pointer to the new trace array.
2) int trace_array_set_clr_event(struct trace_array *tr,
const char *system ,const char *event, bool enable);
Enable/Disable events to this trace array.
Additionally,
- To handle reference counters, export trace_array_put()
- Due to introduction of the above 2 new functions, we no longer need to
export - ftrace_set_clr_event & trace_array_create APIs.
Link: http://lkml.kernel.org/r/1574276919-11119-2-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Link: http://lkml.kernel.org/r/20191120133807.12741-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock
from commit c8183f5489 ("s390/qeth: fix potential deadlock on
workqueue flush"), removed the code which was removed by commit
9897d583b0 ("s390/qeth: consolidate some duplicated HW cmd code").
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Pull networking fixes from David Miller:
1) Validate tunnel options length in act_tunnel_key, from Xin Long.
2) Fix DMA sync bug in gve driver, from Adi Suresh.
3) TSO kills performance on some r8169 chips due to HW issues, disable
by default in that case, from Corinna Vinschen.
4) Fix clock disable mismatch in fec driver, from Chubong Yuan.
5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan.
6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann.
7) Don't napi_disable() twice in r8152 driver, from Hayes Wang.
8) Fix SKB extension memory leak, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
r8152: avoid to call napi_disable twice
MAINTAINERS: Add myself as maintainer of virtio-vsock
udp: drop skb extensions before marking skb stateless
net: rtnetlink: prevent underflows in do_setvfinfo()
can: m_can_platform: remove unnecessary m_can_class_resume() call
can: m_can_platform: set net_device structure as driver data
hv_netvsc: Fix send_table offset in case of a host bug
hv_netvsc: Fix offset usage in netvsc_send_table()
net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN
sfc: Only cancel the PPS workqueue if it exists
nfc: port100: handle command failure cleanly
net-sysfs: fix netdev_queue_add_kobject() breakage
r8152: Re-order napi_disable in rtl8152_close
net: qca_spi: Move reset_count to struct qcaspi
net: qca_spi: fix receive buffer size check
net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode
Revert "net/ibmvnic: Fix EOI when running in XIVE mode"
net/mlxfw: Verify FSM error code translation doesn't exceed array size
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Fix auto group size calculation
...
Fix problems with switching cpufreq drivers on some x86 systems with
ACPI (and with changing the operation modes of the intel_pstate driver
on those systems) introduced by recent changes related to the
management of frequency limits in cpufreq.
-----BEGIN PGP SIGNATURE-----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=S23p
-----END PGP SIGNATURE-----
Merge tag 'pm-5.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management regression fix from Rafael Wysocki:
"Fix problems with switching cpufreq drivers on some x86 systems with
ACPI (and with changing the operation modes of the intel_pstate driver
on those systems) introduced by recent changes related to the
management of frequency limits in cpufreq"
* tag 'pm-5.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: QoS: Invalidate frequency QoS requests after removal
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.
With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.
In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit:
d44248a413 ("perf/core: Rework memory accounting in perf_mmap()")
does a lot of things to the mlock accounting arithmetics, while the only
thing that actually needed to happen is subtracting the part that is
charged to the mm from the part that is charged to the user, so that the
former isn't charged twice.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: songliubraving@fb.com
Link: https://lkml.kernel.org/r/20191120170640.54123-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Many callsites want to fetch the values of system, user, user_nice, guest
or guest_nice kcpustat fields altogether or at least a pair of these.
In that case calling kcpustat_field() for each requested field brings
unecessary overhead when we could fetch all of them in a row.
So provide kcpustat_cpu_fetch() that fetches the whole kcpustat array
in a vtime safe way under the same RCU and seqcount block.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-3-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide support for user, nice, guest and guest_nice fields through
kcpustat_field().
Whether we account the delta to a nice or not nice field is decided on
top of the nice value snapshot taken at the time we call kcpustat_field().
If the nice value of the task has been changed since the last vtime
update, we may have inacurrate distribution of the nice VS unnice
cputime.
However this is considered as a minor issue compared to the proper fix
that would involve interrupting the target on nice updates, which is
undesired on nohz_full CPUs.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-2-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-11-20
The following pull-request contains BPF updates for your *net-next* tree.
We've added 81 non-merge commits during the last 17 day(s) which contain
a total of 120 files changed, 4958 insertions(+), 1081 deletions(-).
There are 3 trivial conflicts, resolve it by always taking the chunk from
196e8ca748:
<<<<<<< HEAD
=======
void *bpf_map_area_mmapable_alloc(u64 size, int numa_node);
>>>>>>> 196e8ca748
<<<<<<< HEAD
void *bpf_map_area_alloc(u64 size, int numa_node)
=======
static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable)
>>>>>>> 196e8ca748
<<<<<<< HEAD
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
=======
/* kmalloc()'ed memory can't be mmap()'ed */
if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
>>>>>>> 196e8ca748
The main changes are:
1) Addition of BPF trampoline which works as a bridge between kernel functions,
BPF programs and other BPF programs along with two new use cases: i) fentry/fexit
BPF programs for tracing with practically zero overhead to call into BPF (as
opposed to k[ret]probes) and ii) attachment of the former to networking related
programs to see input/output of networking programs (covering xdpdump use case),
from Alexei Starovoitov.
2) BPF array map mmap support and use in libbpf for global data maps; also a big
batch of libbpf improvements, among others, support for reading bitfields in a
relocatable manner (via libbpf's CO-RE helper API), from Andrii Nakryiko.
3) Extend s390x JIT with usage of relative long jumps and loads in order to lift
the current 64/512k size limits on JITed BPF programs there, from Ilya Leoshkevich.
4) Add BPF audit support and emit messages upon successful prog load and unload in
order to have a timeline of events, from Daniel Borkmann and Jiri Olsa.
5) Extension to libbpf and xdpsock sample programs to demo the shared umem mode
(XDP_SHARED_UMEM) as well as RX-only and TX-only sockets, from Magnus Karlsson.
6) Several follow-up bug fixes for libbpf's auto-pinning code and a new API
call named bpf_get_link_xdp_info() for retrieving the full set of prog
IDs attached to XDP, from Toke Høiland-Jørgensen.
7) Add BTF support for array of int, array of struct and multidimensional arrays
and enable it for skb->cb[] access in kfree_skb test, from Martin KaFai Lau.
8) Fix AF_XDP by using the correct number of channels from ethtool, from Luigi Rizzo.
9) Two fixes for BPF selftest to get rid of a hang in test_tc_tunnel and to avoid
xdping to be run as standalone, from Jiri Benc.
10) Various BPF selftest fixes when run with latest LLVM trunk, from Yonghong Song.
11) Fix a memory leak in BPF fentry test run data, from Colin Ian King.
12) Various smaller misc cleanups and improvements mostly all over BPF selftests and
samples, from Daniel T. Lee, Andre Guedes, Anders Roxell, Mao Wenan, Yue Haibing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On compat interfaces, the high order bits of nanoseconds should be zeroed
out. This is because the application code or the libc do not guarantee
zeroing of these. If used without zeroing, kernel might be at risk of using
timespec values incorrectly.
Originally it was handled correctly, but lost during is_compat_syscall()
cleanup. Revert the condition back to check CONFIG_64BIT.
Fixes: 98f76206b3 ("compat: Cleanup in_compat_syscall() callers")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191121000303.126523-1-dima@arista.com
Given we recently extended the original bpf_map_area_alloc() helper in
commit fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY"),
we need to apply the same logic as in ff1c08e1f7 ("bpf: Change size
to u64 for bpf_map_{area_alloc, charge_init}()"). To avoid conflicts,
extend it for bpf-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Allow for audit messages to be emitted upon BPF program load and
unload for having a timeline of events. The load itself is in
syscall context, so additional info about the process initiating
the BPF prog creation can be logged and later directly correlated
to the unload event.
The only info really needed from BPF side is the globally unique
prog ID where then audit user space tooling can query / dump all
info needed about the specific BPF program right upon load event
and enrich the record, thus these changes needed here can be kept
small and non-intrusive to the core.
Raw example output:
# auditctl -D
# auditctl -a always,exit -F arch=x86_64 -S bpf
# ausearch --start recent -m 1334
[...]
----
time->Wed Nov 20 12:45:51 2019
type=PROCTITLE msg=audit(1574271951.590:8974): proctitle="./test_verifier"
type=SYSCALL msg=audit(1574271951.590:8974): arch=c000003e syscall=321 success=yes exit=14 a0=5 a1=7ffe2d923e80 a2=78 a3=0 items=0 ppid=742 pid=949 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 ses=2 comm="test_verifier" exe="/root/bpf-next/tools/testing/selftests/bpf/test_verifier" subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1334] msg=audit(1574271951.590:8974): auid=0 uid=0 gid=0 ses=2 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 pid=949 comm="test_verifier" exe="/root/bpf-next/tools/testing/selftests/bpf/test_verifier" prog-id=3260 event=LOAD
----
time->Wed Nov 20 12:45:51 2019
type=UNKNOWN[1334] msg=audit(1574271951.590:8975): prog-id=3260 event=UNLOAD
----
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191120213816.8186-1-jolsa@kernel.org
The valid memory address check in dma_capable only makes sense when mapping
normal memory, not when using dma_map_resource to map a device resource.
Add a new boolean argument to dma_capable to exclude that check for the
dma_map_resource case.
Fixes: b12d66278d ("dma-direct: check for overflows on 32 bit DMA addresses")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
When mapping resources we can't just use swiotlb ram for bounce
buffering. Switch to a direct dma_capable check instead.
Fixes: cfced78696 ("dma-mapping: remove the default map_resource implementation")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
The put_hash_bucket() is a bit cleaner if it takes an unsigned long
directly instead of a pointer to unsigned long.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
These are pure cache maintainance routines, so drop the unused
struct device argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
pidfd_poll() is defined as returning 'unsigned int' but the
.poll method is declared as returning '__poll_t', a bitwise type.
Fix this by using the proper return type and using the EPOLL
constants instead of the POLL ones, as required for __poll_t.
Fixes: b53b0b9d9a ("pidfd: add polling support")
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable@vger.kernel.org # 5.3
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191120003320.31138-1-luc.vanoostenryck@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Modify cpuidle_use_deepest_state() to take an additional exit latency
limit argument to be passed to find_deepest_idle_state() and make
cpuidle_idle_call() pass dev->forced_idle_latency_limit_ns to it for
forced idle.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Rebase and rearrange code, subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases it may be useful to specify an exit latency limit for
the idle state to be used during CPU idle time injection.
Instead of duplicating the information in struct cpuidle_device
or propagating the latency limit in the call stack, replace the
use_deepest_state field with forced_latency_limit_ns to represent
that limit, so that the deepest idle state with exit latency within
that limit is forced (i.e. no governors) when it is set.
A zero exit latency limit for forced idle means to use governors in
the usual way (analogous to use_deepest_state equal to "false" before
this change).
Additionally, add play_idle_precise() taking two arguments, the
duration of forced idle and the idle state exit latency limit, both
in nanoseconds, and redefine play_idle() as a wrapper around that
new function.
This change is preparatory, no functional impact is expected.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject, changelog, cpuidle_use_deepest_state() kerneldoc, whitespace ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switching cpufreq drivers (or switching operation modes of the
intel_pstate driver from "active" to "passive" and vice versa)
does not work on some x86 systems with ACPI after commit
3000ce3c52 ("cpufreq: Use per-policy frequency QoS"), because
the ACPI _PPC and thermal code uses the same frequency QoS request
object for a given CPU every time a cpufreq driver is registered
and freq_qos_remove_request() does not invalidate the request after
removing it from its QoS list, so freq_qos_add_request() complains
and fails when that request is passed to it again.
Fix the issue by modifying freq_qos_remove_request() to clear the qos
and type fields of the frequency request pointed to by its argument
after removing it from its QoS list so as to invalidate it.
Fixes: 3000ce3c52 ("cpufreq: Use per-policy frequency QoS")
Reported-and-tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Oleg provided the following test case:
int main(void)
{
struct sched_param sp = {};
sp.sched_priority = 2;
assert(sched_setscheduler(0, SCHED_FIFO, &sp) == 0);
int lock = vfork();
if (!lock) {
sp.sched_priority = 1;
assert(sched_setscheduler(0, SCHED_FIFO, &sp) == 0);
_exit(0);
}
syscall(__NR_futex, &lock, FUTEX_LOCK_PI, 0,0,0);
return 0;
}
This creates an unkillable RT process spinning in futex_lock_pi() on a UP
machine or if the process is affine to a single CPU. The reason is:
parent child
set FIFO prio 2
vfork() -> set FIFO prio 1
implies wait_for_child() sched_setscheduler(...)
exit()
do_exit()
....
mm_release()
tsk->futex_state = FUTEX_STATE_EXITING;
exit_futex(); (NOOP in this case)
complete() --> wakes parent
sys_futex()
loop infinite because
tsk->futex_state == FUTEX_STATE_EXITING
The same problem can happen just by regular preemption as well:
task holds futex
...
do_exit()
tsk->futex_state = FUTEX_STATE_EXITING;
--> preemption (unrelated wakeup of some other higher prio task, e.g. timer)
switch_to(other_task)
return to user
sys_futex()
loop infinite as above
Just for the fun of it the futex exit cleanup could trigger the wakeup
itself before the task sets its futex state to DEAD.
To cure this, the handling of the exiting owner is changed so:
- A refcount is held on the task
- The task pointer is stored in a caller visible location
- The caller drops all locks (hash bucket, mmap_sem) and blocks
on task::futex_exit_mutex. When the mutex is acquired then
the exiting task has completed the cleanup and the state
is consistent and can be reevaluated.
This is not a pretty solution, but there is no choice other than returning
an error code to user space, which would break the state consistency
guarantee and open another can of problems including regressions.
For stable backports the preparatory commits ac31c7ff86 .. ba31c1a485
are required as well, but for anything older than 5.3.y the backports are
going to be provided when this hits mainline as the other dependencies for
those kernels are definitely not stable material.
Fixes: 778e9a9c3e ("pi-futex: fix exit races and locking problems")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stable Team <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20191106224557.041676471@linutronix.de
attach_to_pi_owner() returns -EAGAIN for various cases:
- Owner task is exiting
- Futex value has changed
The caller drops the held locks (hash bucket, mmap_sem) and retries the
operation. In case of the owner task exiting this can result in a live
lock.
As a preparatory step for seperating those cases, provide a distinct return
value (EBUSY) for the owner exiting case.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.935606117@linutronix.de
The mutex will be used in subsequent changes to replace the busy looping of
a waiter when the futex owner is currently executing the exit cleanup to
prevent a potential live lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.845798895@linutronix.de
exec() attempts to handle potentially held futexes gracefully by running
the futex exit handling code like exit() does.
The current implementation has no protection against concurrent incoming
waiters. The reason is that the futex state cannot be set to
FUTEX_STATE_DEAD after the cleanup because the task struct is still active
and just about to execute the new binary.
While its arguably buggy when a task holds a futex over exec(), for
consistency sake the state handling can at least cover the actual futex
exit cleanup section. This provides state consistency protection accross
the cleanup. As the futex state of the task becomes FUTEX_STATE_OK after the
cleanup has been finished, this cannot prevent subsequent attempts to
attach to the task in case that the cleanup was not successfull in mopping
up all leftovers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.753355618@linutronix.de
Instead of having a smp_mb() and an empty lock/unlock of task::pi_lock move
the state setting into to the lock section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.645603214@linutronix.de
Instead of relying on PF_EXITING use an explicit state for the futex exit
and set it in the futex exit function. This moves the smp barrier and the
lock/unlock serialization into the futex code.
As with the DEAD state this is restricted to the exit path as exec
continues to use the same task struct.
This allows to simplify that logic in a next step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.539409004@linutronix.de
Setting task::futex_state in do_exit() is rather arbitrarily placed for no
reason. Move it into the futex code.
Note, this is only done for the exit cleanup as the exec cleanup cannot set
the state to FUTEX_STATE_DEAD because the task struct is still in active
use.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.439511191@linutronix.de
To allow separate handling of the futex exit state in the futex exit code
for exit and exec, split futex_mm_release() into two functions and invoke
them from the corresponding exit/exec_mm_release() callsites.
Preparatory only, no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.332094221@linutronix.de
mm_release() contains the futex exit handling. mm_release() is called from
do_exit()->exit_mm() and from exec()->exec_mm().
In the exit_mm() case PF_EXITING and the futex state is updated. In the
exec_mm() case these states are not touched.
As the futex exit code needs further protections against exit races, this
needs to be split into two functions.
Preparatory only, no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.240518241@linutronix.de
The futex exit handling relies on PF_ flags. That's suboptimal as it
requires a smp_mb() and an ugly lock/unlock of the exiting tasks pi_lock in
the middle of do_exit() to enforce the observability of PF_EXITING in the
futex code.
Add a futex_state member to task_struct and convert the PF_EXITPIDONE logic
over to the new state. The PF_EXITING dependency will be cleaned up in a
later step.
This prepares for handling various futex exit issues later.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.149449274@linutronix.de
The futex exit handling is #ifdeffed into mm_release() which is not pretty
to begin with. But upcoming changes to address futex exit races need to add
more functionality to this exit code.
Split it out into a function, move it into futex code and make the various
futex exit functions static.
Preparatory only and no functional change.
Folded build fix from Borislav.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.049705556@linutronix.de
Fix sparse warning:
kernel/bpf/arraymap.c:481:5: warning:
symbol 'array_map_mmap' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191119142113.15388-1-yuehaibing@huawei.com
The ftrace_graph_stub was created and points to ftrace_stub as a way to
assign the functon graph tracer function pointer to a stub function with a
different prototype than what ftrace_stub has and not trigger the C
verifier. The ftrace_graph_stub was created via the linker script
vmlinux.lds.h. Unfortunately, powerpc already uses the name
ftrace_graph_stub for its internal implementation of the function graph
tracer, and even though powerpc would still build, the change via the linker
script broke function tracer on powerpc from working.
By using the name ftrace_stub_graph, which does not exist anywhere else in
the kernel, this should not be a problem.
Link: https://lore.kernel.org/r/1573849732.5937.136.camel@lca.pw
Fixes: b83b43ffc6 ("fgraph: Fix function type mismatches of ftrace_graph_return using ftrace_stub")
Reorted-by: Qian Cai <cai@lca.pw>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a direct ftrace callback is at a location that does not have any other
ftrace helpers attached to it, it is possible to simply just change the
text to call the new caller (if the architecture supports it). But this
requires special architecture code. Currently, modify_ftrace_direct() uses a
trick to add a stub ftrace callback to the location forcing it to call the
ftrace iterator. Then it can change the direct helper to call the new
function in C, and then remove the stub. Removing the stub will have the
location now call the new location that the direct helper is using.
The new helper function does the registering the stub trick, but is a weak
function, allowing an architecture to override it to do something a bit more
direct.
Link: https://lore.kernel.org/r/20191115215125.mbqv7taqnx376yed@ast-mbp.dhcp.thefacebook.com
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit:
5e6c3c7b1e ("perf/aux: Fix tracking of auxiliary trace buffer allocation")
tried to guess the correct combination of arithmetic operations that would
undo the AUX buffer's mlock accounting, and failed, leaking the bottom part
when an allocation needs to be charged partially to both user->locked_vm
and mm->pinned_vm, eventually leaving the user with no locked bonus:
$ perf record -e intel_pt//u -m1,128 uname
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.061 MB perf.data ]
$ perf record -e intel_pt//u -m1,128 uname
Permission error mapping pages.
Consider increasing /proc/sys/kernel/perf_event_mlock_kb,
or try again with a smaller value of -m/--mmap_pages.
(current value: 1,128)
Fix this by subtracting both locked and pinned counts when AUX buffer is
unmapped.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
update_cfs_rq_load_avg() calls cfs_rq_util_change() every time PELT decays,
which might be inefficient when the cpufreq driver has rate limitation.
When a task is attached on a CPU, we have this call path:
update_load_avg()
update_cfs_rq_load_avg()
cfs_rq_util_change -- > trig frequency update
attach_entity_load_avg()
cfs_rq_util_change -- > trig frequency update
The 1st frequency update will not take into account the utilization of the
newly attached task and the 2nd one might be discarded because of rate
limitation of the cpufreq driver.
update_cfs_rq_load_avg() is only called by update_blocked_averages()
and update_load_avg() so we can move the call to
cfs_rq_util_change/cpufreq_update_util() into these two functions.
It's also interesting to note that update_load_avg() already calls
cfs_rq_util_change() directly for the !SMP case.
This change will also ensure that cpufreq_update_util() is called even
when there is no more CFS rq in the leaf_cfs_rq_list to update, but only
IRQ, RT or DL PELT signals.
[ mingo: Minor updates. ]
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: juri.lelli@redhat.com
Cc: linux-pm@vger.kernel.org
Cc: mgorman@suse.de
Cc: rostedt@goodmis.org
Cc: sargun@sargun.me
Cc: srinivas.pandruvada@linux.intel.com
Cc: tj@kernel.org
Cc: xiexiuqi@huawei.com
Cc: xiezhipeng1@huawei.com
Fixes: 039ae8bcf7 ("sched/fair: Fix O(nr_cgroups) in the load balancing path")
Link: https://lkml.kernel.org/r/1574083279-799-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add comments to describe each state of goup_type and to add some details
about the load balance at NUMA level.
[ Valentin Schneider: Updates to the comments. ]
[ mingo: Other updates to the comments. ]
Reported-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1573570243-1903-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The task, for which the scheduler looks for the idlest group of CPUs, must
be discounted from all statistics in order to get a fair comparison
between groups. This includes utilization, load, nr_running and idle_cpus.
Such unfairness can be easily highlighted with the unixbench execl 1 task.
This test continuously call execve() and the scheduler looks for the idlest
group/CPU on which it should place the task. Because the task runs on the
local group/CPU, the latter seems already busy even if there is nothing
else running on it. As a result, the scheduler will always select another
group/CPU than the local one.
This recovers most of the performance regression on my system from the
recent load-balancer rewrite.
[ mingo: Minor cleanups. ]
Reported-by: kernel test robot <rong.a.chen@intel.com>
Tested-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: hdanton@sina.com
Cc: parth@linux.ibm.com
Cc: pauld@redhat.com
Cc: quentin.perret@arm.com
Cc: riel@surriel.com
Cc: srikar@linux.vnet.ibm.com
Cc: valentin.schneider@arm.com
Fixes: 57abff067a ("sched/fair: Rework find_idlest_group()")
Link: https://lkml.kernel.org/r/1571762798-25900-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add ability to memory-map contents of BPF array map. This is extremely useful
for working with BPF global data from userspace programs. It allows to avoid
typical bpf_map_{lookup,update}_elem operations, improving both performance
and usability.
There had to be special considerations for map freezing, to avoid having
writable memory view into a frozen map. To solve this issue, map freezing and
mmap-ing is happening under mutex now:
- if map is already frozen, no writable mapping is allowed;
- if map has writable memory mappings active (accounted in map->writecnt),
map freezing will keep failing with -EBUSY;
- once number of writable memory mappings drops to zero, map freezing can be
performed again.
Only non-per-CPU plain arrays are supported right now. Maps with spinlocks
can't be memory mapped either.
For BPF_F_MMAPABLE array, memory allocation has to be done through vmalloc()
to be mmap()'able. We also need to make sure that array data memory is
page-sized and page-aligned, so we over-allocate memory in such a way that
struct bpf_array is at the end of a single page of memory with array->value
being aligned with the start of the second page. On deallocation we need to
accomodate this memory arrangement to free vmalloc()'ed memory correctly.
One important consideration regarding how memory-mapping subsystem functions.
Memory-mapping subsystem provides few optional callbacks, among them open()
and close(). close() is called for each memory region that is unmapped, so
that users can decrease their reference counters and free up resources, if
necessary. open() is *almost* symmetrical: it's called for each memory region
that is being mapped, **except** the very first one. So bpf_map_mmap does
initial refcnt bump, while open() will do any extra ones after that. Thus
number of close() calls is equal to number of open() calls plus one more.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-4-andriin@fb.com
Similarly to bpf_map's refcnt/usercnt, convert bpf_prog's refcnt to atomic64
and remove artificial 32k limit. This allows to make bpf_prog's refcounting
non-failing, simplifying logic of users of bpf_prog_add/bpf_prog_inc.
Validated compilation by running allyesconfig kernel build.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-3-andriin@fb.com
92117d8443 ("bpf: fix refcnt overflow") turned refcounting of bpf_map into
potentially failing operation, when refcount reaches BPF_MAX_REFCNT limit
(32k). Due to using 32-bit counter, it's possible in practice to overflow
refcounter and make it wrap around to 0, causing erroneous map free, while
there are still references to it, causing use-after-free problems.
But having a failing refcounting operations are problematic in some cases. One
example is mmap() interface. After establishing initial memory-mapping, user
is allowed to arbitrarily map/remap/unmap parts of mapped memory, arbitrarily
splitting it into multiple non-contiguous regions. All this happening without
any control from the users of mmap subsystem. Rather mmap subsystem sends
notifications to original creator of memory mapping through open/close
callbacks, which are optionally specified during initial memory mapping
creation. These callbacks are used to maintain accurate refcount for bpf_map
(see next patch in this series). The problem is that open() callback is not
supposed to fail, because memory-mapped resource is set up and properly
referenced. This is posing a problem for using memory-mapping with BPF maps.
One solution to this is to maintain separate refcount for just memory-mappings
and do single bpf_map_inc/bpf_map_put when it goes from/to zero, respectively.
There are similar use cases in current work on tcp-bpf, necessitating extra
counter as well. This seems like a rather unfortunate and ugly solution that
doesn't scale well to various new use cases.
Another approach to solve this is to use non-failing refcount_t type, which
uses 32-bit counter internally, but, once reaching overflow state at UINT_MAX,
stays there. This utlimately causes memory leak, but prevents use after free.
But given refcounting is not the most performance-critical operation with BPF
maps (it's not used from running BPF program code), we can also just switch to
64-bit counter that can't overflow in practice, potentially disadvantaging
32-bit platforms a tiny bit. This simplifies semantics and allows above
described scenarios to not worry about failing refcount increment operation.
In terms of struct bpf_map size, we are still good and use the same amount of
space:
BEFORE (3 cache lines, 8 bytes of padding at the end):
struct bpf_map {
const struct bpf_map_ops * ops __attribute__((__aligned__(64))); /* 0 8 */
struct bpf_map * inner_map_meta; /* 8 8 */
void * security; /* 16 8 */
enum bpf_map_type map_type; /* 24 4 */
u32 key_size; /* 28 4 */
u32 value_size; /* 32 4 */
u32 max_entries; /* 36 4 */
u32 map_flags; /* 40 4 */
int spin_lock_off; /* 44 4 */
u32 id; /* 48 4 */
int numa_node; /* 52 4 */
u32 btf_key_type_id; /* 56 4 */
u32 btf_value_type_id; /* 60 4 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct btf * btf; /* 64 8 */
struct bpf_map_memory memory; /* 72 16 */
bool unpriv_array; /* 88 1 */
bool frozen; /* 89 1 */
/* XXX 38 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
atomic_t refcnt __attribute__((__aligned__(64))); /* 128 4 */
atomic_t usercnt; /* 132 4 */
struct work_struct work; /* 136 32 */
char name[16]; /* 168 16 */
/* size: 192, cachelines: 3, members: 21 */
/* sum members: 146, holes: 1, sum holes: 38 */
/* padding: 8 */
/* forced alignments: 2, forced holes: 1, sum forced holes: 38 */
} __attribute__((__aligned__(64)));
AFTER (same 3 cache lines, no extra padding now):
struct bpf_map {
const struct bpf_map_ops * ops __attribute__((__aligned__(64))); /* 0 8 */
struct bpf_map * inner_map_meta; /* 8 8 */
void * security; /* 16 8 */
enum bpf_map_type map_type; /* 24 4 */
u32 key_size; /* 28 4 */
u32 value_size; /* 32 4 */
u32 max_entries; /* 36 4 */
u32 map_flags; /* 40 4 */
int spin_lock_off; /* 44 4 */
u32 id; /* 48 4 */
int numa_node; /* 52 4 */
u32 btf_key_type_id; /* 56 4 */
u32 btf_value_type_id; /* 60 4 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct btf * btf; /* 64 8 */
struct bpf_map_memory memory; /* 72 16 */
bool unpriv_array; /* 88 1 */
bool frozen; /* 89 1 */
/* XXX 38 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
atomic64_t refcnt __attribute__((__aligned__(64))); /* 128 8 */
atomic64_t usercnt; /* 136 8 */
struct work_struct work; /* 144 32 */
char name[16]; /* 176 16 */
/* size: 192, cachelines: 3, members: 21 */
/* sum members: 154, holes: 1, sum holes: 38 */
/* forced alignments: 2, forced holes: 1, sum forced holes: 38 */
} __attribute__((__aligned__(64)));
This patch, while modifying all users of bpf_map_inc, also cleans up its
interface to match bpf_map_put with separate operations for bpf_map_inc and
bpf_map_inc_with_uref (to match bpf_map_put and bpf_map_put_with_uref,
respectively). Also, given there are no users of bpf_map_inc_not_zero
specifying uref=true, remove uref flag and default to uref=false internally.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-2-andriin@fb.com
Daniel Borkmann says:
====================
pull-request: bpf 2019-11-15
The following pull-request contains BPF updates for your *net* tree.
We've added 1 non-merge commits during the last 9 day(s) which contain
a total of 1 file changed, 3 insertions(+), 1 deletion(-).
The main changes are:
1) Fix a missing unlock of bpf_devs_lock in bpf_offload_dev_create()'s
error path, from Dan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some uclamp helpers had their return type changed from 'unsigned int' to
'enum uclamp_id' by commit
0413d7f33e ("sched/uclamp: Always use 'enum uclamp_id' for clamp_id values")
but it happens that some do return a value in the [0, SCHED_CAPACITY_SCALE]
range, which should really be unsigned int. The affected helpers are
uclamp_none(), uclamp_rq_max_value() and uclamp_eff_value(). Fix those up.
Note that this doesn't lead to any obj diff using a relatively recent
aarch64 compiler (8.3-2019.03). The current code of e.g. uclamp_eff_value()
properly returns an 11 bit value (bits_per(1024)) and doesn't seem to do
anything funny. I'm still marking this as fixing the above commit to be on
the safe side.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: patrick.bellasi@matbug.net
Cc: qperret@google.com
Cc: surenb@google.com
Cc: tj@kernel.org
Fixes: 0413d7f33e ("sched/uclamp: Always use 'enum uclamp_id' for clamp_id values")
Link: https://lkml.kernel.org/r/20191115103908.27610-1-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar:
"Misc fixes: a handful of AUX event handling related fixes, a Sparse
fix and two ABI fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing static inline on perf_cgroup_switch()
perf/core: Consistently fail fork on allocation failures
perf/aux: Disallow aux_output for kernel events
perf/core: Reattach a misplaced comment
perf/aux: Fix the aux_output group inheritance fix
perf/core: Disallow uncore-cgroup events
On certain QTI chipsets some GPIOs are direct-connect interrupts to the
GIC to be used as regular interrupt lines. When the GPIOs are not used
for interrupt generation the interrupt line is disabled. But disabling
the interrupt at GIC does not prevent the interrupt to be reported as
pending at GIC_ISPEND. Later, when drivers call enable_irq() on the
interrupt, an unwanted interrupt occurs.
Introduce get and set methods for irqchip's parent to clear it's pending
irq state. This then can be invoked by the GPIO interrupt controller on
the parents in it hierarchy to clear the interrupt before enabling the
interrupt.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-7-git-send-email-ilina@codeaurora.org
[updated commit text and minor code fixes]
The main motivation to add set_tid to clone3() is CRIU.
To restore a process with the same PID/TID CRIU currently uses
/proc/sys/kernel/ns_last_pid. It writes the desired (PID - 1) to
ns_last_pid and then (quickly) does a clone(). This works most of the
time, but it is racy. It is also slow as it requires multiple syscalls.
Extending clone3() to support *set_tid makes it possible restore a
process using CRIU without accessing /proc/sys/kernel/ns_last_pid and
race free (as long as the desired PID/TID is available).
This clone3() extension places the same restrictions (CAP_SYS_ADMIN)
on clone3() with *set_tid as they are currently in place for ns_last_pid.
The original version of this change was using a single value for
set_tid. At the 2019 LPC, after presenting set_tid, it was, however,
decided to change set_tid to an array to enable setting the PID of a
process in multiple PID namespaces at the same time. If a process is
created in a PID namespace it is possible to influence the PID inside
and outside of the PID namespace. Details also in the corresponding
selftest.
To create a process with the following PIDs:
PID NS level Requested PID
0 (host) 31496
1 42
2 1
For that example the two newly introduced parameters to struct
clone_args (set_tid and set_tid_size) would need to be:
set_tid[0] = 1;
set_tid[1] = 42;
set_tid[2] = 31496;
set_tid_size = 3;
If only the PIDs of the two innermost nested PID namespaces should be
defined it would look like this:
set_tid[0] = 1;
set_tid[1] = 42;
set_tid_size = 2;
The PID of the newly created process would then be the next available
free PID in the PID namespace level 0 (host) and 42 in the PID namespace
at level 1 and the PID of the process in the innermost PID namespace
would be 1.
The set_tid array is used to specify the PID of a process starting
from the innermost nested PID namespaces up to set_tid_size PID namespaces.
set_tid_size cannot be larger then the current PID namespace level.
Signed-off-by: Adrian Reber <areber@redhat.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20191115123621.142252-1-areber@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Allow FENTRY/FEXIT BPF programs to attach to other BPF programs of any type
including their subprograms. This feature allows snooping on input and output
packets in XDP, TC programs including their return values. In order to do that
the verifier needs to track types not only of vmlinux, but types of other BPF
programs as well. The verifier also needs to translate uapi/linux/bpf.h types
used by networking programs into kernel internal BTF types used by FENTRY/FEXIT
BPF programs. In some cases LLVM optimizations can remove arguments from BPF
subprograms without adjusting BTF info that LLVM backend knows. When BTF info
disagrees with actual types that the verifiers sees the BPF trampoline has to
fallback to conservative and treat all arguments as u64. The FENTRY/FEXIT
program can still attach to such subprograms, but it won't be able to recognize
pointer types like 'struct sk_buff *' and it won't be able to pass them to
bpf_skb_output() for dumping packets to user space. The FENTRY/FEXIT program
would need to use bpf_probe_read_kernel() instead.
The BPF_PROG_LOAD command is extended with attach_prog_fd field. When it's set
to zero the attach_btf_id is one vmlinux BTF type ids. When attach_prog_fd
points to previously loaded BPF program the attach_btf_id is BTF type id of
main function or one of its subprograms.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-18-ast@kernel.org
Make the verifier check that BTF types of function arguments match actual types
passed into top-level BPF program and into BPF-to-BPF calls. If types match
such BPF programs and sub-programs will have full support of BPF trampoline. If
types mismatch the trampoline has to be conservative. It has to save/restore
five program arguments and assume 64-bit scalars.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-17-ast@kernel.org
Annotate BPF program context types with program-side type and kernel-side type.
This type information is used by the verifier. btf_get_prog_ctx_type() is
used in the later patches to verify that BTF type of ctx in BPF program matches to
kernel expected ctx type. For example, the XDP program type is:
BPF_PROG_TYPE(BPF_PROG_TYPE_XDP, xdp, struct xdp_md, struct xdp_buff)
That means that XDP program should be written as:
int xdp_prog(struct xdp_md *ctx) { ... }
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-16-ast@kernel.org
btf_resolve_helper_id() caching logic is a bit racy, since under root the
verifier can verify several programs in parallel. Fix it with READ/WRITE_ONCE.
Fix the type as well, since error is also recorded.
Fixes: a7658e1a41 ("bpf: Check types of arguments passed into helpers")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-15-ast@kernel.org
Introduce BPF trampoline concept to allow kernel code to call into BPF programs
with practically zero overhead. The trampoline generation logic is
architecture dependent. It's converting native calling convention into BPF
calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The
registers R1 to R5 are used to pass arguments into BPF functions. The main BPF
program accepts only single argument "ctx" in R1. Whereas CPU native calling
convention is different. x86-64 is passing first 6 arguments in registers
and the rest on the stack. x86-32 is passing first 3 arguments in registers.
sparc64 is passing first 6 in registers. And so on.
The trampolines between BPF and kernel already exist. BPF_CALL_x macros in
include/linux/filter.h statically compile trampolines from BPF into kernel
helpers. They convert up to five u64 arguments into kernel C pointers and
integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On
32-bit architecture they're meaningful.
The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and
__bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert
kernel function arguments into array of u64s that BPF program consumes via
R1=ctx pointer.
This patch set is doing the same job as __bpf_trace_##call() static
trampolines, but dynamically for any kernel function. There are ~22k global
kernel functions that are attachable via nop at function entry. The function
arguments and types are described in BTF. The job of btf_distill_func_proto()
function is to extract useful information from BTF into "function model" that
architecture dependent trampoline generators will use to generate assembly code
to cast kernel function arguments into array of u64s. For example the kernel
function eth_type_trans has two pointers. They will be casted to u64 and stored
into stack of generated trampoline. The pointer to that stack space will be
passed into BPF program in R1. On x86-64 such generated trampoline will consume
16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will
make sure that only two u64 are accessed read-only by BPF program. The verifier
will also recognize the precise type of the pointers being accessed and will
not allow typecasting of the pointer to a different type within BPF program.
The tracing use case in the datacenter demonstrated that certain key kernel
functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always
active. Other functions have both kprobe and kretprobe. So it is essential to
keep both kernel code and BPF programs executing at maximum speed. Hence
generated BPF trampoline is re-generated every time new program is attached or
detached to maintain maximum performance.
To avoid the high cost of retpoline the attached BPF programs are called
directly. __bpf_prog_enter/exit() are used to support per-program execution
stats. In the future this logic will be optimized further by adding support
for bpf_stats_enabled_key inside generated assembly code. Introduction of
preemptible and sleepable BPF programs will completely remove the need to call
to __bpf_prog_enter/exit().
Detach of a BPF program from the trampoline should not fail. To avoid memory
allocation in detach path the half of the page is used as a reserve and flipped
after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly
which is enough for BPF tracing use cases. This limit can be increased in the
future.
BPF_TRACE_FENTRY programs have access to raw kernel function arguments while
BPF_TRACE_FEXIT programs have access to kernel return value as well. Often
kprobe BPF program remembers function arguments in a map while kretprobe
fetches arguments from a map and analyzes them together with return value.
BPF_TRACE_FEXIT accelerates this typical use case.
Recursion prevention for kprobe BPF programs is done via per-cpu
bpf_prog_active counter. In practice that turned out to be a mistake. It
caused programs to randomly skip execution. The tracing tools missed results
they were looking for. Hence BPF trampoline doesn't provide builtin recursion
prevention. It's a job of BPF program itself and will be addressed in the
follow up patches.
BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases
in the future. For example to remove retpoline cost from XDP programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org
Add bpf_arch_text_poke() helper that is used by BPF trampoline logic to patch
nops/calls in kernel text into calls into BPF trampoline and to patch
calls/nops inside BPF programs too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-4-ast@kernel.org
Currently passing alignment greater than 4 to bpf_jit_binary_alloc does
not work: in such cases it silently aligns only to 4 bytes.
On s390, in order to load a constant from memory in a large (>512k) BPF
program, one must use lgrl instruction, whose memory operand must be
aligned on an 8-byte boundary.
This patch makes it possible to request 8-byte alignment from
bpf_jit_binary_alloc, and also makes it issue a warning when an
unsupported alignment is requested.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191115123722.58462-1-iii@linux.ibm.com
An additional check has been recently added to ensure that a RCU related lock
is held while the RCU list is iterated.
The `pwqs' are sometimes iterated without a RCU lock but with the &wq->mutex
acquired leading to a warning.
Teach list_for_each_entry_rcu() that the RCU usage is okay if &wq->mutex
is acquired during the list traversal.
Fixes: 28875945ba ("rcu: Add support for consolidated-RCU reader checking")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Both unregister_ftrace_direct() and modify_ftrace_direct() needs to
normalize the ip passed in to match the rec->ip, as it is acceptable to have
the ip on the ftrace call site but not the start. There are also common
validity checks with the record found by the ip, these should be done for
both unregister_ftrace_direct() and modify_ftrace_direct().
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As an instruction pointer passed into register_ftrace_direct() may just
exist on the ftrace call site, but may not be the start of the call site
itself, register_ftrace_direct() still needs to update test if a direct call
exists on the normalized site, as only one direct call is allowed at any one
time.
Fixes: 763e34e74b ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The direct->count wasn't being updated properly, where it only was updated
when the first entry was added, but should be updated every time.
Fixes: 013bf0da04 ("ftrace: Add ftrace_find_direct_func()")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Robust futexes utilize the robust_list mechanism to allow the kernel to
release futexes which are held when a task exits. The exit can be voluntary
or caused by a signal or fault. This prevents that waiters block forever.
The futex operations in user space store a pointer to the futex they are
either locking or unlocking in the op_pending member of the per task robust
list.
After a lock operation has succeeded the futex is queued in the robust list
linked list and the op_pending pointer is cleared.
After an unlock operation has succeeded the futex is removed from the
robust list linked list and the op_pending pointer is cleared.
The robust list exit code checks for the pending operation and any futex
which is queued in the linked list. It carefully checks whether the futex
value is the TID of the exiting task. If so, it sets the OWNER_DIED bit and
tries to wake up a potential waiter.
This is race free for the lock operation but unlock has two race scenarios
where waiters might not be woken up. These issues can be observed with
regular robust pthread mutexes. PI aware pthread mutexes are not affected.
(1) Unlocking task is killed after unlocking the futex value in user space
before being able to wake a waiter.
pthread_mutex_unlock()
|
V
atomic_exchange_rel (&mutex->__data.__lock, 0)
<------------------------killed
lll_futex_wake () |
|
|(__lock = 0)
|(enter kernel)
|
V
do_exit()
exit_mm()
mm_release()
exit_robust_list()
handle_futex_death()
|
|(__lock = 0)
|(uval = 0)
|
V
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr))
return 0;
The sanity check which ensures that the user space futex is owned by
the exiting task prevents the wakeup of waiters which in consequence
block infinitely.
(2) Waiting task is killed after a wakeup and before it can acquire the
futex in user space.
OWNER WAITER
futex_wait()
pthread_mutex_unlock() |
| |
|(__lock = 0) |
| |
V |
futex_wake() ------------> wakeup()
|
|(return to userspace)
|(__lock = 0)
|
V
oldval = mutex->__data.__lock
<-----------------killed
atomic_compare_and_exchange_val_acq (&mutex->__data.__lock, |
id | assume_other_futex_waiters, 0) |
|
|
(enter kernel)|
|
V
do_exit()
|
|
V
handle_futex_death()
|
|(__lock = 0)
|(uval = 0)
|
V
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr))
return 0;
The sanity check which ensures that the user space futex is owned
by the exiting task prevents the wakeup of waiters, which seems to
be correct as the exiting task does not own the futex value, but
the consequence is that other waiters wont be woken up and block
infinitely.
In both scenarios the following conditions are true:
- task->robust_list->list_op_pending != NULL
- user space futex value == 0
- Regular futex (not PI)
If these conditions are met then it is reasonably safe to wake up a
potential waiter in order to prevent the above problems.
As this might be a false positive it can cause spurious wakeups, but the
waiter side has to handle other types of unrelated wakeups, e.g. signals
gracefully anyway. So such a spurious wakeup will not affect the
correctness of these operations.
This workaround must not touch the user space futex value and cannot set
the OWNER_DIED bit because the lock value is 0, i.e. uncontended. Setting
OWNER_DIED in this case would result in inconsistent state and subsequently
in malfunction of the owner died handling in user space.
The rest of the user space state is still consistent as no other task can
observe the list_op_pending entry in the exiting tasks robust list.
The eventually woken up waiter will observe the uncontended lock value and
take it over.
[ tglx: Massaged changelog and comment. Made the return explicit and not
depend on the subsequent check and added constants to hand into
handle_futex_death() instead of plain numbers. Fixed a few coding
style issues. ]
Fixes: 0771dfefc9 ("[PATCH] lightweight robust futexes: core")
Signed-off-by: Yang Tao <yang.tao172@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1573010582-35297-1-git-send-email-wang.yi59@zte.com.cn
Link: https://lkml.kernel.org/r/20191106224555.943191378@linutronix.de
Pull misc vfs fixes from Al Viro:
"Assorted fixes all over the place; some of that is -stable fodder,
some regressions from the last window"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
ecryptfs: fix unlink and rmdir in face of underlying fs modifications
audit_get_nd(): don't unlock parent too early
exportfs_decode_fh(): negative pinned may become positive without the parent locked
cgroup: don't put ERR_PTR() into fc->root
autofs: fix a leak in autofs_expire_indirect()
aio: Fix io_pgetevents() struct __compat_aio_sigset layout
fs/namespace.c: fix use-after-free of mount in mnt_warn_timestamp_expiry()
Increase the maximum allowed count of synthetic event fields from 16 to 32
in order to allow for larger-than-usual events.
Link: http://lkml.kernel.org/r/20191115091730.9192-1-dedekind1@gmail.com
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
At the moment, the compilation of the old time32 system calls depends
purely on the architecture. As systems with new libc based on 64-bit
time_t are getting deployed, even architectures that previously supported
these (notably x86-32 and arm32 but also many others) no longer depend on
them, and removing them from a kernel image results in a smaller kernel
binary, the same way we can leave out many other optional system calls.
More importantly, on an embedded system that needs to keep working
beyond year 2038, any user space program calling these system calls
is likely a bug, so removing them from the kernel image does provide
an extra debugging help for finding broken applications.
I've gone back and forth on hiding this option unless CONFIG_EXPERT
is set. This version leaves it visible based on the logic that
eventually it will be turned off indefinitely.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is no 64-bit version of getitimer/setitimer since that is not
actually needed. However, the implementation is built around the
deprecated 'struct timeval' type.
Change the code to use timespec64 internally to reduce the dependencies
on timeval and associated helper functions.
Minor adjustments in the code are needed to make the native and compat
version work the same way, and to keep the range check working after
the conversion.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Preparing for a change to the itimer internals, stop using the
do_setitimer() symbol and instead use a new higher-level interface.
The do_getitimer()/do_setitimer functions can now be made static,
allowing the compiler to potentially produce better object code.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The itimer handling for the old alpha osf_setitimer/osf_getitimer
system calls is identical to the compat version of getitimer/setitimer,
so just use those directly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The structure is only used in one place, moving it there simplifies the
interface and helps with later changes to this code.
Rename it to match the other time32 structures in the process.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The compat_get_timeval() and timeval_valid() interfaces are deprecated
and getting removed along with the definition of struct timeval itself.
Change the two implementations of the settimeofday() system call to
open-code these helpers and completely avoid references to timeval.
The timeval_valid() call is not needed any more here, only a check to
avoid overflowing tv_nsec during the multiplication, as there is another
range check in do_sys_settimeofday64().
Tested-by: syzbot+dccce9b26ba09ca49966@syzkaller.appspotmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All of the remaining syscalls that pass a timeval (gettimeofday, utime,
futimesat) can trivially be changed to pass a __kernel_old_timeval
instead, which has a compatible layout, but avoids ambiguity with
the timeval type in user space.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are two 'struct timeval' fields in 'struct rusage'.
Unfortunately the definition of timeval is now ambiguous when used in
user space with a libc that has a 64-bit time_t, and this also changes
the 'rusage' definition in user space in a way that is incompatible with
the system call interface.
While there is no good solution to avoid all ambiguity here, change
the definition in the kernel headers to be compatible with the kernel
ABI, using __kernel_old_timeval as an unambiguous base type.
In previous discussions, there was also a plan to add a replacement
for rusage based on 64-bit timestamps and nanosecond resolution,
i.e. 'struct __kernel_timespec'. I have patches for that as well,
if anyone thinks we should do that.
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is mainly a patch for clarification, and to let us remove
the time_t definition from the kernel to prevent new users from
creeping in that might not be y2038-safe.
All remaining uses of 'time_t' or '__kernel_time_t' are part of
the user API that cannot be changed by that either have a
replacement or that do not suffer from the y2038 overflow.
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Exporting perf_event_pause() as an external accessor for kernel users (such
as KVM) who may do both disable perf_event and read count with just one
time to hold perf_event_ctx_lock. Also the value could be reset optionally.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, perf_event_period() is used by user tools via ioctl. Based on
naming convention, exporting perf_event_period() for kernel users (such
as KVM) who may recalibrate the event period for their assigned counter
according to their requirements.
The perf_event_period() is an external accessor, just like the
perf_event_{en,dis}able() and should thus use perf_event_ctx_lock().
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the race between load and unload a kernel module.
sys_delete_module()
try_stop_module()
mod->state = _GOING
add_unformed_module()
old = find_module_all()
(old->state == _GOING =>
wait_event_interruptible())
During pre-condition
finished_loading() rets 0
schedule()
(never gets waken up later)
free_module()
mod->state = _UNFORMED
list_del_rcu(&mod->list)
(dels mod from "modules" list)
return
The race above leads to modprobe hanging forever on loading
a module.
Error paths on loading module call wake_up_all(&module_wq) after
freeing module, so let's do the same on straight module unload.
Fixes: 6e6de3dee5 ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
uclamp_update_active() should perform the update when
p->uclamp[clamp_id].active is true. But when the logic was inverted in
[1], the if condition wasn't inverted correctly too.
[1] https://lore.kernel.org/lkml/20190902073836.GO2369@hirez.programming.kicks-ass.net/
Reported-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: babbe170e0 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Link: https://lkml.kernel.org/r/20191114211052.15116-1-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While attempting to clear the busy bit at the end of a work execution,
atomic_cmpxchg() expects the value of the flags with the pending bit
cleared as the old value. However by mistake the value of the flags is
passed without clearing the pending bit first.
As a result, clearing the busy bit fails and irq_work_sync() may stall:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [blktrace:4948]
CPU: 0 PID: 4948 Comm: blktrace Not tainted 5.4.0-rc7-00003-gfeb4a51323bab #1
RIP: 0010:irq_work_sync+0x4/0x10
Call Trace:
relay_close_buf+0x19/0x50
relay_close+0x64/0x100
blk_trace_free+0x1f/0x50
__blk_trace_remove+0x1e/0x30
blk_trace_ioctl+0x11b/0x140
blkdev_ioctl+0x6c1/0xa40
block_ioctl+0x39/0x40
do_vfs_ioctl+0xa5/0x700
ksys_ioctl+0x70/0x80
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5b/0x1d0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
So clear the appropriate bit before passing the old flags to cmpxchg().
Fixes: feb4a51323 ("irq_work: Slightly simplify IRQ_WORK_PENDING clearing")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
Link: https://lkml.kernel.org/r/20191113171201.14032-1-frederic@kernel.org
Add a new function modify_ftrace_direct() that will allow a user to update
an existing direct caller to a new trampoline, without missing hits due to
unregistering one and then adding another.
Link: https://lore.kernel.org/r/20191109022907.6zzo6orhxpt5n2sv@ast-mbp.dhcp.thefacebook.com
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The latency_fsnotify() stub when the function is not defined, was missing
the "inline".
Link: https://lore.kernel.org/r/20191115140213.74c5efe7@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
743210386c ("cgroup: use cgrp->kn->id as the cgroup ID") added WARN
which triggers if cgroup_id(root_cgrp) is not 1. This is fine on
64bit ino archs but on 32bit archs cgroup ID is ((gen << 32) | ino)
and gen starts at 1, so the root id is 0x1_0000_0001 instead of 1
always triggering the WARN.
What we wanna make sure is that the ino part is 1. Fix it.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 743210386c ("cgroup: use cgrp->kn->id as the cgroup ID")
Signed-off-by: Tejun Heo <tj@kernel.org>
There was a stray tab in the help text of the aforementioned config
option which showed like this:
The "print fmt" of the trace events will show the enum/sizeof names
instead of their values. This can cause problems for user space tools
...
in menuconfig. Remove it and end a sentence with a fullstop.
No functional changes.
Link: http://lkml.kernel.org/r/20191112174219.10933-1-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Without this, buffers can be printed with __print_array macro that has
no formatting options and can be hard to read. The other way is to
mimic formatting capability with multiple calls of trace event with one
call per row which gives performance impact and different timestamp in
each row.
Link: http://lkml.kernel.org/r/1573130738-29390-2-git-send-email-piotrx.maziarz@linux.intel.com
Signed-off-by: Piotr Maziarz <piotrx.maziarz@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Check whether the non-suffixed symbol is notrace, since suffixed
symbols are generated by the compilers for optimization. Based on
these suffixed symbols, notrace check might not work because
some of them are just a partial code of the original function.
(e.g. cold-cache (unlikely) code is separated from original
function as FUNCTION.cold.XX)
For example, without this fix,
# echo p device_add.cold.67 > /sys/kernel/debug/tracing/kprobe_events
sh: write error: Invalid argument
# cat /sys/kernel/debug/tracing/error_log
[ 135.491035] trace_kprobe: error: Failed to register probe event
Command: p device_add.cold.67
^
# dmesg | tail -n 1
[ 135.488599] trace_kprobe: Could not probe notrace function device_add.cold.67
With this,
# echo p device_add.cold.66 > /sys/kernel/debug/tracing/kprobe_events
# cat /sys/kernel/debug/kprobes/list
ffffffff81599de9 k device_add.cold.66+0x0 [DISABLED]
Actually, kprobe blacklist already did similar thing,
see within_kprobe_blacklist().
Link: http://lkml.kernel.org/r/157233790394.6706.18243942030937189679.stgit@devnote2
Fixes: 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fail to allocate memory for tgid_map, because it requires order-6 page.
detail as:
c3 sh: page allocation failure: order:6,
mode:0x140c0c0(GFP_KERNEL), nodemask=(null)
c3 sh cpuset=/ mems_allowed=0
c3 CPU: 3 PID: 5632 Comm: sh Tainted: G W O 4.14.133+ #10
c3 Hardware name: Generic DT based system
c3 Backtrace:
c3 [<c010bdbc>] (dump_backtrace) from [<c010c08c>](show_stack+0x18/0x1c)
c3 [<c010c074>] (show_stack) from [<c0993c54>](dump_stack+0x84/0xa4)
c3 [<c0993bd0>] (dump_stack) from [<c0229858>](warn_alloc+0xc4/0x19c)
c3 [<c0229798>] (warn_alloc) from [<c022a6e4>](__alloc_pages_nodemask+0xd18/0xf28)
c3 [<c02299cc>] (__alloc_pages_nodemask) from [<c0248344>](kmalloc_order+0x20/0x38)
c3 [<c0248324>] (kmalloc_order) from [<c0248380>](kmalloc_order_trace+0x24/0x108)
c3 [<c024835c>] (kmalloc_order_trace) from [<c01e6078>](set_tracer_flag+0xb0/0x158)
c3 [<c01e5fc8>] (set_tracer_flag) from [<c01e6404>](trace_options_core_write+0x7c/0xcc)
c3 [<c01e6388>] (trace_options_core_write) from [<c0278b1c>](__vfs_write+0x40/0x14c)
c3 [<c0278adc>] (__vfs_write) from [<c0278e10>](vfs_write+0xc4/0x198)
c3 [<c0278d4c>] (vfs_write) from [<c027906c>](SyS_write+0x6c/0xd0)
c3 [<c0279000>] (SyS_write) from [<c01079a0>](ret_fast_syscall+0x0/0x54)
Switch to use kvcalloc to avoid unexpected allocation failures.
Link: http://lkml.kernel.org/r/1571888070-24425-1-git-send-email-chunyan.zhang@unisoc.com
Signed-off-by: Yuming Han <yuming.han@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The C compiler is allowing more checks to make sure that function pointers
are assigned to the correct prototype function. Unfortunately, the function
graph tracer uses a special name with its assigned ftrace_graph_return
function pointer that maps to a stub function used by the function tracer
(ftrace_stub). The ftrace_graph_return variable is compared to the
ftrace_stub in some archs to know if the function graph tracer is enabled or
not. This means we can not just simply create a new function stub that
compares it without modifying all the archs.
Instead, have the linker script create a function_graph_stub that maps to
ftrace_stub, and this way we can define the prototype for it to match the
prototype of ftrace_graph_return, and make the compiler checks all happy!
Link: http://lkml.kernel.org/r/20191015090055.789a0aed@gandalf.local.home
Cc: linux-sh@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As part of commit f45d1225ad ("tracing: Kernel access to Ftrace
instances") we exported certain functions. Here, we are adding some additional
NULL checks to ensure safe usage by users of these APIs.
Link: http://lkml.kernel.org/r/1565805327-579-4-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A trace array can be destroyed from userspace or kernel. Verify if the
trace array exists before proceeding to destroy/remove it.
Link: http://lkml.kernel.org/r/1565805327-579-3-git-send-email-divya.indi@oracle.com
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Divya Indi <divya.indi@oracle.com>
[ Removed unneeded braces ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Declare the newly introduced and exported APIs in the header file -
include/linux/trace.h. Moving previous declarations from
kernel/trace/trace.h to include/linux/trace.h.
Link: http://lkml.kernel.org/r/1565805327-579-2-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The event_class_ftrace_##call and event_##call do not seem
to be used outside of trace_export.c so make them both static
to avoid a number of sparse warnings:
kernel/trace/trace_entries.h:59:1: warning: symbol 'event_class_ftrace_function' was not declared. Should it be static?
kernel/trace/trace_entries.h:59:1: warning: symbol '__event_function' was not declared. Should it be static?
kernel/trace/trace_entries.h:77:1: warning: symbol 'event_class_ftrace_funcgraph_entry' was not declared. Should it be static?
kernel/trace/trace_entries.h:77:1: warning: symbol '__event_funcgraph_entry' was not declared. Should it be static?
kernel/trace/trace_entries.h:93:1: warning: symbol 'event_class_ftrace_funcgraph_exit' was not declared. Should it be static?
kernel/trace/trace_entries.h:93:1: warning: symbol '__event_funcgraph_exit' was not declared. Should it be static?
kernel/trace/trace_entries.h:129:1: warning: symbol 'event_class_ftrace_context_switch' was not declared. Should it be static?
kernel/trace/trace_entries.h:129:1: warning: symbol '__event_context_switch' was not declared. Should it be static?
kernel/trace/trace_entries.h:149:1: warning: symbol 'event_class_ftrace_wakeup' was not declared. Should it be static?
kernel/trace/trace_entries.h:149:1: warning: symbol '__event_wakeup' was not declared. Should it be static?
kernel/trace/trace_entries.h:171:1: warning: symbol 'event_class_ftrace_kernel_stack' was not declared. Should it be static?
kernel/trace/trace_entries.h:171:1: warning: symbol '__event_kernel_stack' was not declared. Should it be static?
kernel/trace/trace_entries.h:191:1: warning: symbol 'event_class_ftrace_user_stack' was not declared. Should it be static?
kernel/trace/trace_entries.h:191:1: warning: symbol '__event_user_stack' was not declared. Should it be static?
kernel/trace/trace_entries.h:214:1: warning: symbol 'event_class_ftrace_bprint' was not declared. Should it be static?
kernel/trace/trace_entries.h:214:1: warning: symbol '__event_bprint' was not declared. Should it be static?
kernel/trace/trace_entries.h:230:1: warning: symbol 'event_class_ftrace_print' was not declared. Should it be static?
kernel/trace/trace_entries.h:230:1: warning: symbol '__event_print' was not declared. Should it be static?
kernel/trace/trace_entries.h:247:1: warning: symbol 'event_class_ftrace_raw_data' was not declared. Should it be static?
kernel/trace/trace_entries.h:247:1: warning: symbol '__event_raw_data' was not declared. Should it be static?
kernel/trace/trace_entries.h:262:1: warning: symbol 'event_class_ftrace_bputs' was not declared. Should it be static?
kernel/trace/trace_entries.h:262:1: warning: symbol '__event_bputs' was not declared. Should it be static?
kernel/trace/trace_entries.h:277:1: warning: symbol 'event_class_ftrace_mmiotrace_rw' was not declared. Should it be static?
kernel/trace/trace_entries.h:277:1: warning: symbol '__event_mmiotrace_rw' was not declared. Should it be static?
kernel/trace/trace_entries.h:298:1: warning: symbol 'event_class_ftrace_mmiotrace_map' was not declared. Should it be static?
kernel/trace/trace_entries.h:298:1: warning: symbol '__event_mmiotrace_map' was not declared. Should it be static?
kernel/trace/trace_entries.h:322:1: warning: symbol 'event_class_ftrace_branch' was not declared. Should it be static?
kernel/trace/trace_entries.h:322:1: warning: symbol '__event_branch' was not declared. Should it be static?
kernel/trace/trace_entries.h:343:1: warning: symbol 'event_class_ftrace_hwlat' was not declared. Should it be static?
kernel/trace/trace_entries.h:343:1: warning: symbol '__event_hwlat' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191015121012.18824-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Add additional header output for PREEMPT_RT.
Link: http://lkml.kernel.org/r/20191015191821.11479-34-bigeasy@linutronix.de
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This burst feature enables the user to generate a burst of
preempt/irqsoff latencies. This makes it possible to test whether we
are able to detect latencies that systematically occur very close to
each other.
The maximum burst size is 10. We also create 10 identical test
functions, so that we get 10 different backtraces; this is useful
when we want to test whether we can detect all the latencies in a
burst. Otherwise, there would be no easy way of differentiating
between which latency in a burst was captured by the tracer.
In addition, there is a sysfs trigger, so that it's not necessary to
reload the module to repeat the test. The trigger will appear as
/sys/kernel/preemptirq_delay_test/trigger in sysfs.
Link: http://lkml.kernel.org/r/20191008220824.7911-3-viktor.rosendahl@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Viktor Rosendahl (BMW) <viktor.rosendahl@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch implements the feature that the tracing_max_latency file,
e.g. /sys/kernel/debug/tracing/tracing_max_latency will receive
notifications through the fsnotify framework when a new latency is
available.
One particularly interesting use of this facility is when enabling
threshold tracing, through /sys/kernel/debug/tracing/tracing_thresh,
together with the preempt/irqsoff tracers. This makes it possible to
implement a user space program that can, with equal probability,
obtain traces of latencies that occur immediately after each other in
spite of the fact that the preempt/irqsoff tracers operate in overwrite
mode.
This facility works with the hwlat, preempt/irqsoff, and wakeup
tracers.
The tracers may call the latency_fsnotify() from places such as
__schedule() or do_idle(); this makes it impossible to call
queue_work() directly without risking a deadlock. The same would
happen with a softirq, kernel thread or tasklet. For this reason we
use the irq_work mechanism to call queue_work().
This patch creates a new workqueue. The reason for doing this is that
I wanted to use the WQ_UNBOUND and WQ_HIGHPRI flags. My thinking was
that WQ_UNBOUND might help with the latency in some important cases.
If we use:
queue_work(system_highpri_wq, &tr->fsnotify_work);
then the work will (almost) always execute on the same CPU but if we are
unlucky that CPU could be too busy while there could be another CPU in
the system that would be able to process the work soon enough.
queue_work_on() could be used to queue the work on another CPU but it
seems difficult to select the right CPU.
Link: http://lkml.kernel.org/r/20191008220824.7911-2-viktor.rosendahl@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Viktor Rosendahl (BMW) <viktor.rosendahl@gmail.com>
[ Added max() to have one compare for max latency ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Looking for ways to shrink the size of the dyn_ftrace structure, knowing the
information about how many pages and the number of groups of those pages, is
useful in working out the best ways to save on memory.
This adds one info print on how many groups of pages were used to allocate
the ftrace dyn_ftrace structures, and also shows the number of pages and
groups in the dyn_ftrace_total_info (which is used for debugging).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As testing for direct calls from the function graph tracer adds a little
overhead (which is a lot when tracing every function), add a counter that
can be used to test if function_graph tracer needs to test for a direct
caller or not.
It would have been nicer if we could use a static branch, but the static
branch logic fails when used within the function graph tracer trampoline.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As function_graph tracer modifies the return address to insert a trampoline
to trace the return of a function, it must be aware of a direct caller, as
when it gets called, the function's return address may not be at on the
stack where it expects. It may have to see if that return address points to
the a direct caller and adjust if it is.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add the start of the functionality to allow other trampolines to use the
ftrace mcount/fentry/nop location. This adds two new functions:
register_ftrace_direct() and unregister_ftrace_direct()
Both take two parameters: the first is the instruction address of where the
mcount/fentry/nop exists, and the second is the trampoline to have that
location called.
This will handle cases where ftrace is already used on that same location,
and will make it still work, where the registered direct called trampoline
will get called after all the registered ftrace callers are handled.
Currently, it will not allow for IP_MODIFY functions to be called at the
same locations, which include some kprobes and live kernel patching.
At this point, no architecture supports this. This is only the start of
implementing the framework.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since it stores CLOCK_BOOTTIME, not, as the name suggests,
CLOCK_REALTIME, let's rename ->real_start_time to ->start_bootime.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This changes "to the list" to "from the list" and also deletes the
obsolete comment about the "@nested" argument.
The "nested" argument was removed in this commit, earlier this year:
5facae4f35 ("locking/lockdep: Remove unused @nested argument from lock_release()").
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20191104091252.GA31509@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
AUX data can be used to annotate perf events such as performance counters
or tracepoints/breakpoints by including it in sample records when
PERF_SAMPLE_AUX flag is set. Such samples would be instrumental in debugging
and profiling by providing, for example, a history of instruction flow
leading up to the event's overflow.
The implementation makes use of grouping an AUX event with all the events
that wish to take samples of the AUX data, such that the former is the
group leader. The samplees should also specify the desired size of the AUX
sample via attr.aux_sample_size.
AUX capable PMUs need to explicitly add support for sampling, because it
relies on a new callback to take a snapshot of the buffer without touching
the event states.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: mathieu.poirier@linaro.org
Link: https://lkml.kernel.org/r/20191025140835.53665-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It looks like a "static inline" has been missed in front
of the empty definition of perf_cgroup_switch() under
certain configurations.
Fixes the following sparse warning:
kernel/events/core.c:1035:1: warning: symbol 'perf_cgroup_switch' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191106132527.19977-1-ben.dooks@codethink.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
313ccb9615 ("perf: Allocate context task_ctx_data for child event")
makes the inherit path skip over the current event in case of task_ctx_data
allocation failure. This, however, is inconsistent with allocation failures
in perf_event_alloc(), which would abort the fork.
Correct this by returning an error code on task_ctx_data allocation
failure and failing the fork in that case.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191105075702.60319-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit
ab43762ef0 ("perf: Allow normal events to output AUX data")
added 'aux_output' bit to the attribute structure, which relies on AUX
events and grouping, neither of which is supported for the kernel events.
This notwithstanding, attempts have been made to use it in the kernel
code, suggesting the necessity of an explicit hard -EINVAL.
Fix this by rejecting attributes with aux_output set for kernel events.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191030134731.5437-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A comment is in a wrong place in perf_event_create_kernel_counter().
Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191030134731.5437-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While discussing uncore event scheduling, I noticed we do not in fact
seem to dis-allow making uncore-cgroup events. Such events make no
sense what so ever because the cgroup is a CPU local state where
uncore counts across a number of CPUs.
Disallow them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While seemingly harmless, __sched_fork() does hrtimer_init(), which,
when DEBUG_OBJETS, can end up doing allocations.
This then results in the following lock order:
rq->lock
zone->lock.rlock
batched_entropy_u64.lock
Which in turn causes deadlocks when we do wakeups while holding that
batched_entropy lock -- as the random code does.
Solve this by moving __sched_fork() out from under rq->lock. This is
safe because nothing there relies on rq->lock, as also evident from the
other __sched_fork() callsite.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: bigeasy@linutronix.de
Cc: cl@linux.com
Cc: keescook@chromium.org
Cc: penberg@kernel.org
Cc: rientjes@google.com
Cc: thgarnie@google.com
Cc: tytso@mit.edu
Cc: will@kernel.org
Fixes: b7d5dc2107 ("random: add a spinlock_t to struct batched_entropy")
Link: https://lkml.kernel.org/r/20191001091837.GK4536@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 TSX Async Abort and iTLB Multihit mitigations from Thomas Gleixner:
"The performance deterioration departement is not proud at all of
presenting the seventh installment of speculation mitigations and
hardware misfeature workarounds:
1) TSX Async Abort (TAA) - 'The Annoying Affair'
TAA is a hardware vulnerability that allows unprivileged
speculative access to data which is available in various CPU
internal buffers by using asynchronous aborts within an Intel TSX
transactional region.
The mitigation depends on a microcode update providing a new MSR
which allows to disable TSX in the CPU. CPUs which have no
microcode update can be mitigated by disabling TSX in the BIOS if
the BIOS provides a tunable.
Newer CPUs will have a bit set which indicates that the CPU is not
vulnerable, but the MSR to disable TSX will be available
nevertheless as it is an architected MSR. That means the kernel
provides the ability to disable TSX on the kernel command line,
which is useful as TSX is a truly useful mechanism to accelerate
side channel attacks of all sorts.
2) iITLB Multihit (NX) - 'No eXcuses'
iTLB Multihit is an erratum where some Intel processors may incur
a machine check error, possibly resulting in an unrecoverable CPU
lockup, when an instruction fetch hits multiple entries in the
instruction TLB. This can occur when the page size is changed
along with either the physical address or cache type. A malicious
guest running on a virtualized system can exploit this erratum to
perform a denial of service attack.
The workaround is that KVM marks huge pages in the extended page
tables as not executable (NX). If the guest attempts to execute in
such a page, the page is broken down into 4k pages which are
marked executable. The workaround comes with a mechanism to
recover these shattered huge pages over time.
Both issues come with full documentation in the hardware
vulnerabilities section of the Linux kernel user's and administrator's
guide.
Thanks to all patch authors and reviewers who had the extraordinary
priviledge to be exposed to this nuisance.
Special thanks to Borislav Petkov for polishing the final TAA patch
set and to Paolo Bonzini for shepherding the KVM iTLB workarounds and
providing also the backports to stable kernels for those!"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/taa: Fix printing of TAA_MSG_SMT on IBRS_ALL CPUs
Documentation: Add ITLB_MULTIHIT documentation
kvm: x86: mmu: Recovery of shattered NX large pages
kvm: Add helper function for creating VM worker threads
kvm: mmu: ITLB_MULTIHIT mitigation
cpu/speculation: Uninline and export CPU mitigations helpers
x86/cpu: Add Tremont to the cpu vulnerability whitelist
x86/bugs: Add ITLB_MULTIHIT bug infrastructure
x86/tsx: Add config options to set tsx=on|off|auto
x86/speculation/taa: Add documentation for TSX Async Abort
x86/tsx: Add "auto" option to the tsx= cmdline parameter
kvm/x86: Export MDS_NO=0 to guests when TSX is enabled
x86/speculation/taa: Add sysfs reporting for TSX Async Abort
x86/speculation/taa: Add mitigation for TSX Async Abort
x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default
x86/cpu: Add a helper function x86_read_arch_cap_msr()
x86/msr: Add the IA32_TSX_CTRL MSR
cgroup ID is currently allocated using a dedicated per-hierarchy idr
and used internally and exposed through tracepoints and bpf. This is
confusing because there are tracepoints and other interfaces which use
the cgroupfs ino as IDs.
The preceding changes made kn->id exposed as ino as 64bit ino on
supported archs or ino+gen (low 32bits as ino, high gen). There's no
reason for cgroup to use different IDs. The kernfs IDs are unique and
userland can easily discover them and map them back to paths using
standard file operations.
This patch replaces cgroup IDs with kernfs IDs.
* cgroup_id() is added and all cgroup ID users are converted to use it.
* kernfs_node creation is moved to earlier during cgroup init so that
cgroup_id() is available during init.
* While at it, s/cgroup/cgrp/ in psi helpers for consistency.
* Fallback ID value is changed to 1 to be consistent with root cgroup
ID.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Each kernfs_node is identified with a 64bit ID. The low 32bit is
exposed as ino and the high gen. While this already allows using inos
as keys by looking up with wildcard generation number of 0, it's
adding unnecessary complications for 64bit ino archs which can
directly use kernfs_node IDs as inos to uniquely identify each cgroup
instance.
This patch exposes IDs directly as inos on 64bit ino archs. The
conversion is mostly straight-forward.
* 32bit ino archs behave the same as before. 64bit ino archs now use
the whole 64bit ID as ino and the generation number is fixed at 1.
* 64bit inos still use the same idr allocator which gurantees that the
lower 32bits identify the current live instance uniquely and the
high 32bits are incremented whenever the low bits wrap. As the
upper 32bits are no longer used as gen and we don't wanna start ino
allocation with 33rd bit set, the initial value for highbits
allocation is changed to 0 on 64bit ino archs.
* blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify
the issuing cgroup. Userland builds FILEID_INO32_GEN fids from
these numbers to look up the cgroups. To remain compatible with the
behavior, always output (LOW32,HIGH32) which will be constructed
back to the original 64bit ID by __kernfs_fh_to_dentry().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
kernfs_find_and_get_node_by_ino() looks the kernfs_node matching the
specified ino. On top of that, kernfs_get_node_by_id() and
kernfs_fh_get_inode() implement full ID matching by testing the rest
of ID.
On surface, confusingly, the two are slightly different in that the
latter uses 0 gen as wildcard while the former doesn't - does it mean
that the latter can't uniquely identify inodes w/ 0 gen? In practice,
this is a distinction without a difference because generation number
starts at 1. There are no actual IDs with 0 gen, so it can always
safely used as wildcard.
Let's simplify the code by renaming kernfs_find_and_get_node_by_ino()
to kernfs_find_and_get_node_by_id(), moving all lookup logics into it,
and removing now unnecessary kernfs_get_node_by_id().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_node->id is currently a union kernfs_node_id which represents
either a 32bit (ino, gen) pair or u64 value. I can't see much value
in the usage of the union - all that's needed is a 64bit ID which the
current code is already limited to. Using a union makes the code
unnecessarily complicated and prevents using 64bit ino without adding
practical benefits.
This patch drops union kernfs_node_id and makes kernfs_node->id a u64.
ino is stored in the lower 32bits and gen upper. Accessors -
kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the
ino and gen. This simplifies ID handling less cumbersome and will
allow using 64bit inos on supported archs.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexei Starovoitov <ast@kernel.org>
ns_to_timespec64() calls div_s64_rem(), which is a rather slow function on
32-bit architectures, as it cannot take advantage of the do_div()
optimizations for constant arguments.
Open-code the div_s64_rem() function in ns_to_timespec64(), so a constant
divider can be passed into the optimized div_u64_rem() function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108203435.112759-3-arnd@arndb.de
A cast to 'time_t' was accidentally left in place during the
conversion of __do_adjtimex() to 64-bit timestamps, so the
resulting value is incorrectly truncated.
Remove the cast so the 64-bit time gets propagated correctly.
Fixes: ead25417f8 ("timex: use __kernel_timex internally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191108203435.112759-2-arnd@arndb.de
Currently, the cpuidle subsystem uses microseconds as the unit of
time which (among other things) causes the idle loop to incur some
integer division overhead for no clear benefit.
In order to allow cpuidle to measure time in nanoseconds, add two
new fields, exit_latency_ns and target_residency_ns, to represent the
exit latency and target residency of an idle state in nanoseconds,
respectively, to struct cpuidle_state and initialize them with the
help of the corresponding values in microseconds provided by drivers.
Additionally, change cpuidle_governor_latency_req() to return the
idle state exit latency constraint in nanoseconds.
Also meeasure idle state residency (last_residency_ns in struct
cpuidle_device and time_ns in struct cpuidle_driver) in nanoseconds
and update the cpuidle core and governors accordingly.
However, the menu governor still computes typical intervals in
microseconds to avoid integer overflows.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Pull cgroup fix from Tejun Heo:
"There's an inadvertent preemption point in ptrace_stop() which was
reliably triggering for a test scenario significantly slowing it down.
This contains Oleg's fix to remove the unwanted preemption point"
* 'for-5.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: freezer: call cgroup_enter_frozen() with preemption disabled in ptrace_stop()
This comment block explains why include/generated/compile.h is omitted,
but nothing about include/generated/autoconf.h, which might be more
difficult to understand. Add more comments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'pushd' ... 'popd' is the last bash-specific code in this script.
One way to avoid it is to run the code in a sub-shell.
With that addressed, you can run this script with sh.
I replaced $(BASH) with $(CONFIG_SHELL), and I changed the hashbang
to #!/bin/sh.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This script copies headers by the cpio command twice; first from
srctree, and then from objtree. However, when we building in-tree,
we know the srctree and the objtree are the same. That is, all the
headers copied by the first cpio are overwritten by the second one.
Skip the first cpio when we are building in-tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This script computes md5sum of headers in srctree and in objtree.
However, when we are building in-tree, we know the srctree and the
objtree are the same. That is, we end up with the same computation
twice. In fact, the first two lines of kernel/kheaders.md5 are always
the same for in-tree builds.
Unify the two md5sum calculations.
For in-tree builds ($building_out_of_srctree is empty), we check
only two directories, "include", and "arch/$SRCARCH/include".
For out-of-tree builds ($building_out_of_srctree is 1), we check
4 directories, "$srctree/include", "$srctree/arch/$SRCARCH/include",
"include", and "arch/$SRCARCH/include" since we know they are all
different.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'head' and 'tail' commands can take a file path directly.
So, you do not need to run 'cat'.
cat kernel/kheaders.md5 | head -1
... is equivalent to:
head -1 kernel/kheaders.md5
and the latter saves forking one process.
While I was here, I replaced 'head -1' with 'head -n 1'.
I also replaced '==' with '=' since we do not have a good reason to
use the bashism.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With modern NIC, it is not unusual having about ~256,000 active dma
mappings and a hash size of 1024 buckets is too small.
Forcing full cache line per bucket does not seem useful, especially now
that we have contention on free_entries_lock for allocations and freeing
of entries. Better use the space to fit more buckets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move all fields used during exact match lookups to the first cache line.
This makes debug_dma_mapping_error() and friends about 50% faster.
Since it removes two 32bit holes, force a cacheline alignment on struct
dma_debug_entry.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Integrate the generic dma remapping implementation into the main flow.
This prepares for architectures like xtensa that use an uncached
segment for pages in the kernel mapping, but can also remap highmem
from CMA. To simplify that implementation we now always deduct the
page from the physical address via the DMA address instead of the
virtual address.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode. Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook. Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables. This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
My commit b0c51f1584 ("stacktrace: Don't skip first entry on
noncurrent tasks") adds one or zero to skipnr by "!!(current == tsk)".
But the C99 standard says:
The == (equal to) and != (not equal to) operators are
...
Each of the operators yields 1 if the specified relation is true and 0
if it is false.
So there is no need to prepend the above expression by "!!" -- remove it.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111092647.27419-1-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of fetching the value of flags and perform an xchg() to clear
a bit, just use atomic_fetch_andnot() that is more suitable to do that
job in one operation while keeping the full ordering.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108160858.31665-4-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When irq_work_claim() finds IRQ_WORK_PENDING flag already set, we just
return and don't raise a new IPI. We expect the destination to see
and handle our latest updades thanks to the pairing atomic_xchg()
in irq_work_run_list().
But cmpxchg() doesn't guarantee a full memory barrier upon failure. So
it's possible that the destination misses our latest updates.
So use atomic_fetch_or() instead that is unconditionally fully ordered
and also performs exactly what we want here and simplify the code.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108160858.31665-3-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
