Clean up.
The PROC_ARGS macros were added when I thought that NFSD tracepoints
would be reporting endpoint information. However, tracepoints in the
RPC server now report transport endpoint information, so in general
there's no need for the upper layers to do that any more, and these
macros can be retired.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSv3 and NFSv4 use u64 offset values on the wire. Record these values
verbatim without the implicit type case to loff_t.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
According to commit bbf2f09883 ("nfsd: Reset the boot verifier on
all write I/O errors"), the Linux NFS server forces all clients to
resend pending unstable writes if any server-side write or commit
operation encounters an error (say, ENOSPC). This is a rare and
quite exceptional event that could require administrative recovery
action, so it should be made trace-able. Example trace event:
nfsd-938 [002] 7174.945558: nfsd_writeverf_reset: boot_time= 61cc920d xid=0xdcd62036 error=-28 new verifier=0x08aecc6142515904
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since a clone error commit can cause the boot verifier to change,
we should trace those errors.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: Addressed a checkpatch.pl splat in fs/nfsd/vfs.h ]
Clean up: The garbage_args and cant_encode tracepoints report the
same information as each other, so combine them into a single
tracepoint class to reduce code duplication and slightly reduce the
size of trace.o.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: surface useful show_ macros so they can be shared between
the client and server trace code.
Additional clean up:
- Housekeeping: ensure the correct #include files are pulled in
and add proper TRACE_DEFINE_ENUM where they are missing
- Use a consistent naming scheme for the helpers
- Store values to be displayed symbolically as unsigned long, as
that is the type that the __print_yada() functions take
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The double copy of the string is a mistake, plus __assign_str()
uses strlen(), which is wrong to do on a string that isn't
guaranteed to be NUL-terminated.
Fixes: 6019ce0742 ("NFSD: Add a tracepoint to record directory entry encoding")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean-up: Re-order the display of IP address and client ID to be
consistent with other _cb_ tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: These are noise in properly working systems. If you really
need to observe the operation of the callback mechanism, use the
sunrpc:rpc\* tracepoints along with the workqueue tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Record a tracepoint event when the server performs a callback
probe. This event can be enabled as a group with other nfsd_cb
tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Renamed so it can be enabled as a set with the other nfsd_cb_
tracepoints. And, consistent with those tracepoints, report the
address of the client, the client ID the server has given it, and
the state ID being recalled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Record the arguments of CB_OFFLOAD callbacks so we can better
observe asynchronous copy-offload behavior. For example:
nfsd-995 [008] 7721.934222: nfsd_cb_offload:
addr=192.168.2.51:0 client 6092a47c:35a43fc1 fh_hash=0x8739113a
count=116528 status=0
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When the server kicks off a CB_LM_NOTIFY callback, record its
arguments so we can better observe asynchronous locking behavior.
For example:
nfsd-998 [002] 1471.705873: nfsd_cb_notify_lock: addr=192.168.2.51:0 client 6092a47c:35a43fc1 fh_hash=0x8950b23a
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Display the transport protocol and authentication flavor so admins
can see what they might be getting wrong.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Provide more clarity about when the callback channel is in trouble.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
TRACE_DEFINE_ENUM() is necessary for enum {} but not for C macros.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Some of the most common cases are traced. Enough infrastructure is
now in place that more can be added later, as needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Record client-requested termination of client IDs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This tracepoint has been replaced by nfsd_clid_cred_mismatch and
nfsd_clid_verf_mismatch, and can simply be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Record when a client presents a different boot verifier than the
one we know about. Typically this is a sign the client has
rebooted, but sometimes it signals a conflicting client ID, which
the client's administrator will need to address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Record when a client tries to establish a lease record but uses an
unexpected credential. This is often a sign of a configuration
problem.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since commit 9a6944fee6 ("tracing: Add a verifier to check string
pointers for trace events"), which was merged in v5.13-rc1,
TP_printk() no longer tacitly supports the "%.*s" format specifier.
These are low value tracepoints, so just remove them.
Reported-by: David Wysochanski <dwysocha@redhat.com>
Fixes: dd5e3fbc1f ("NFSD: Add tracepoints to the NFSD state management code")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Enable watching the progress of directory encoding to capture the
timing of any issues with reading or encoding a directory. The
new tracepoint captures dirent encoding for all NFS versions.
For example, here's what a few NFSv4 directory entries might look
like:
nfsd-989 [002] 468.596265: nfsd_dirent: fh_hash=0x5d162594 ino=2 name=.
nfsd-989 [002] 468.596267: nfsd_dirent: fh_hash=0x5d162594 ino=1 name=..
nfsd-989 [002] 468.596299: nfsd_dirent: fh_hash=0x5d162594 ino=3827 name=zlib.c
nfsd-989 [002] 468.596325: nfsd_dirent: fh_hash=0x5d162594 ino=3811 name=xdiff
nfsd-989 [002] 468.596351: nfsd_dirent: fh_hash=0x5d162594 ino=3810 name=xdiff-interface.h
nfsd-989 [002] 468.596377: nfsd_dirent: fh_hash=0x5d162594 ino=3809 name=xdiff-interface.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For troubleshooting purposes, record failures to decode NFSv4
operation arguments and encode operation results.
trace_nfsd_compound_decode_err() replaces the dprintk() call sites
that are embedded in READ_* macros that are about to be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Display all currently possible NFSD_MAY permission flags.
Move and rename show_nf_may with a more generic name because the
NFSD_MAY permission flags are used in other places besides the file
cache.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now when a read delegation is given, two delegation related traces
will be printed:
nfsd_deleg_open: client 5f45b854:e6058001 stateid 00000030:00000001
nfsd_deleg_none: client 5f45b854:e6058001 stateid 0000002f:00000001
Although the intention is to let developers know two stateid are
returned, the traces are confusing about whether or not a read delegation
is handled out. So renaming trace_nfsd_deleg_none() to trace_nfsd_open()
and trace_nfsd_deleg_open() to trace_nfsd_deleg_read() to make
the intension clearer.
The patched traces will be:
nfsd_deleg_read: client 5f48a967:b55b21cd stateid 00000003:00000001
nfsd_open: client 5f48a967:b55b21cd stateid 00000002:00000001
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Capture obvious events and replace dprintk() call sites. Introduce
infrastructure so that adding more tracepoints in this code later
is simplified.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Try to capture DRC failures.
Two additional clean-ups:
- Introduce Doxygen-style comments for the main entry points
- Remove a dprintk that fires for an allocation failure. This was
the only dprintk in the REPCACHE class.
Reported-by: kbuild test robot <lkp@intel.com>
[ cel: force typecast for display of checksum values ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add tracing to allow us to figure out where any stale filehandle issues
may be originating from.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use the 'refcount_t' type instead of 'atomic_t' for improved
refcounting safety.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
perf does not know how to deal with a __builtin_bswap32() call, and
complains. All other functions just store the xid etc in host endian
form, so let's do that in the tracepoint for nfsd_file_acquire too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, NFSv2/3 reads and writes have to open a file, do the read or
write and then close it again for each RPC. This is highly inefficient,
especially when the underlying filesystem has a relatively slow open
routine.
This patch adds a new open file cache to knfsd. Rather than doing an
open for each RPC, the read/write handlers can call into this cache to
see if there is one already there for the correct filehandle and
NFS_MAY_READ/WRITE flags.
If there isn't an entry, then we create a new one and attempt to
perform the open. If there is, then we wait until the entry is fully
instantiated and return it if it is at the end of the wait. If it's
not, then we attempt to take over construction.
Since the main goal is to speed up NFSv2/3 I/O, we don't want to
close these files on last put of these objects. We need to keep them
around for a little while since we never know when the next READ/WRITE
will come in.
Cache entries have a hardcoded 1s timeout, and we have a recurring
workqueue job that walks the cache and purges any entries that have
expired.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Richard Sharpe <richard.sharpe@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This helps record the identity and timing of the ops in each NFSv4
COMPOUND, replacing dprintk calls that did much the same thing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4 read compound processing invokes nfsd_splice_read and
nfs_readv directly, so the trace points currently in nfsd_read are
not invoked for NFSv4 reads.
Move the NFSD READ trace points to common helpers so that NFSv4
reads are captured.
Also, record any local I/O error that occurs, the total count of
bytes that were actually returned, and whether splice or vectored
read was used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
