This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbko34ACgkQJNaLcl1U
h9CQiwf9HseC6VkNQ0ISVZ2UsSf8K/HsHsdBGl7/CRr0SEvS3pszYMkKPbhRggsF
aQ4nfitXeN7Vo6S0tNXx63wzjpMPkjrHdV0XY+WJxfuCaeb3DHFEJ4uvlgv53aoh
M+wz1aldvKWjDPwhkzcJEaneQ36U7OlUSBsbFHR82dBDguEm+h29tAxTuLlwL5Zb
M8NuSfbh0cfY9Kk1cPGsqaHD8wjUeg6/Q5qnbDg2kAm0aF1fAxfyFKRX6Z5s9ekd
LeU3EIdRbI8UlHv7Afl0UKDYtYqL1ubwmjDb45HnsE4FmNEmDEbf8c1adRumZAjm
Js9yzswiaaHAvotCaEstFC6HYUL+oQ==
=jugn
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
The CM9825 is a High Definition Audio Codec.
There are 2 independent stereo outputs, one of the stereo
outputs is cap-less with HP AMP, and the other is line out to
connect the active speaker. The inputs can be Line-in and MIC-in.
Signed-off-by: Leo Tsai <antivirus621@gmail.com>
Link: https://patch.msgid.link/20240910065542.6534-1-antivirus621@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I have done a lot of analysis for these type of devices and collaborated
quite a bit with Nick Weihs (author of the first patch submitted for this
including adding samsung_helper.c). More information can be found in the
issue on Github [1] including additional rationale and testing.
The existing implementation includes a large number of equalizer coef
values that are not necessary to actually init and enable the speaker
amps, as well as create a somewhat worse sound profile. Users have
reported "muffled" or "muddy" sound; more information about this including
my analysis of the differences can be found in the linked Github issue.
This patch refactors the "v2" version of ALC298_FIXUP_SAMSUNG_AMP to a much
simpler implementation which removes the new samsung_helper.c, reuses more
of the existing patch_realtek.c, and sends significantly fewer unnecessary
coef values (including removing all of these EQ-specific coef values).
A pcm_playback_hook is used to dynamically enable and disable the speaker
amps only when there will be audio playback; this is to match the behavior
of how the driver for these devices is working in Windows, and is
suspected but not yet tested or confirmed to help with power consumption.
Support for models with 2 speaker amps vs 4 speaker amps is controlled by
a specific quirk name for both types. A new int num_speaker_amps has been
added to alc_spec so that the hooks can know how many speaker amps to
enable or disable. This design was chosen to limit the number of places
that subsystem ids will need to be maintained: like this, they can be
maintained only once in the quirk table and there will not be another
separate list of subsystem ids to maintain elsewhere in the code.
Also updated the quirk name from ALC298_FIXUP_SAMSUNG_AMP2 to
ALC298_FIXUP_SAMSUNG_AMP_V2_.. as this is not a quirk for "Amp #2" on
ALC298 but is instead a different version of how to handle it.
More devices have been added (see Github issue for testing confirmation),
as well as a small cleanup to existing names.
[1]: https://github.com/thesofproject/linux/issues/4055#issuecomment-2323411911
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Link: https://patch.msgid.link/20240909193000.838815-1-josh@joshuagrisham.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Vaio VJFH52 is equipped with ACL256, and needs a
fix to make the internal mic and headphone mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20240909162751.4790-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The azx_bus->dma_type is referred only for allocating the
communication buffers like CORB/RIRB, and the allocation size is
small. Hence it doesn't have to be S/G buffer allocation, which is an
obvious overkill. Use the standard SNDRV_DMA_TYPE_DEV_WC instead.
This was changed to SNDRV_DMA_TYPE_DEV_WC_SG in the commit
37137ec26c ("ALSA: hda: Once again fix regression of page
allocations with IOMMU") as a workaround for IOMMU-backed
allocations. But this is no longer needed since the allocation with
SNDRV_DMA_TYPE_DEV_WC itself was fixed in the commit 9c27301342
("ALSA: memalloc: Use DMA API for x86 WC page allocations, too").
So this patch reverts the previous workaround in this piece of code.
Link: https://patch.msgid.link/20240909134744.25426-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-5-8371948d3921@baylibre.com
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-4-8371948d3921@baylibre.com
The custom rate constraint lists were necessary to support 12kHz and 24kHz.
These rates are now available through SNDRV_PCM_RATE_12000 and
SNDRV_PCM_RATE_24000.
Use them and drop the custom rate constraint rules.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-3-8371948d3921@baylibre.com
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-2-8371948d3921@baylibre.com
When the headset is connected, there is no automatic switching of the
capture source - you can only manually select the headset microphone
in pavucontrol.
This patch fixes/activates the inactive microphone of the headset.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240905140211.937385-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute LED on this HP laptop uses ALC236 and requires a quirk to function. This patch enables the existing quirk for the device.
Signed-off-by: Maximilien Perreault <maximilienperreault@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240904031013.21220-1-maximilienperreault@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute led is controlled by ALC245. This patch enables the already
existing quirk for this device.
Signed-off-by: Adam Queler <queler+k@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903202419.31433-1-queler+k@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mic in those laptops suffers too high gain resulting in mostly (fan
or else) noise being recorded. In addition to the existing fixup about
mic detection, apply also limiting its boost. While at it, extend the
quirk to also V5[46]0TNE models, which have the same issue.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903124939.6213-1-marmarek@invisiblethingslab.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo V145 is having phase inverted dmic but simply applying inverted
dmic fixups does not work. Chaining up verb fixes for ALC283 enables
inverting dmic fixup to work properly.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240830-lenovo-v145-fixes-v3-1-f7b7265068fa@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We do not need model specific HDA quirks to construct the component
binding details of Cirrus Logic companion amplifiers as this information
is already present in the ACPI.
Quirks are then only required for special workarounds not described in
the ACPI such as internal configuration of the Realtek codecs.
The codec pointer is now initialized in hda_component_manager_init() so
that we can detect when companion amplifiers are found in the ACPI but
the SSID invokes a quirk that also attempts to create the component
binding.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240829161114.140938-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Sirius notebooks have two sets of speakers 0x17 (sides) and
0x1d (top center). The side speakers are active by default but
the top speakers aren't.
This patch provides a pincfg quirk to activate the top speakers.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240827102540.9480-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the initialization of parent->mutex into
hda_component_manager_init() so that it is always valid.
In hda_component_manager_bind() do not clear the parent information.
Only zero-fill the per-component data ready for it to be filled in
by the components as they bind.
Previously parent->mutex was being initialized only in
hda_component_manager_bind(). This meant that it was only
initialized if all components appeared and there was a bind callback.
If there wasn't a bind the mutex object was not valid when the
Realtek driver called any of the other functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 047b9cbbaa ("ALSA: hda: hda_component: Protect shared data with a mutex")
Link: https://patch.msgid.link/20240826094940.45563-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the HP Pavilion Aero 13 (13-bg0xxx) (year 2024) to list of
quirks for keyboard LED mute indication.
The laptop has two LEDs (one for speaker and one for mic mute). The
pre-existing quirk ALC245_FIXUP_HP_X360_MUTE_LEDS chains both the quirk for
mic and speaker mute.
Tested on 6.11.0-rc4 with the aforementioned laptop.
Signed-off-by: Hendrik Borghorst <hendrikborghorst@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825174351.5687-1-hendrikborghorst@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
144d:c1cc requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: YOUNGJIN JOO <neoelec@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825092515.28728-1-neoelec@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug
headphone or headset.
It had a chance to get no sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/d0de1b03fd174520945dde216d765223@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell platform, plug headphone or headset, it had a chance to get no
sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/bb8e2de30d294dc287944efa0667685a@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDA driver cannot assume that the order that the devices are
specified in the cirrus,dev-index matches the order of calibration
entries.
Only a calibration entry with a matching silicon id will be used.
Fixes: cfa43aaa79 ("ALSA: hda: cs35l56: Apply amp calibration from EFI data")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240821124711.44325-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A spiritual successor to haswell/baytrail removal series [1].
The avs-driver found in sound/soc/intel/avs is a direct replacement to
the existing skylake-driver. It covers all features supported by it and
more and aligns with the recommended flows and requirements based on
Windows driver equivalent.
The skylake-driver related UAPI has been removed with "ASoC: Drop
soc-topology ABI v4 support" [2].
For the official kernel tree the deprecation begun with v6.0. Most
skylake-drivers users moved to avs- or SOF-driver when AudioDSP
capabilities are available on the platform or to snd-hda-intel
(sound/pci/hda) when such capabilities are not.
For the supported trees the deprecation begun with v5.4 with v5.15 being
the first where the skylake-driver is disabled entirely.
All machine board drivers that consume this DSP driver have their
replacements present within sound/soc/intel/avs/boards/ directory.
[1]: https://lore.kernel.org/alsa-devel/20201006064907.16277-1-cezary.rojewski@intel.com/
[2]: https://lore.kernel.org/alsa-devel/20240403091629.647267-1-cezary.rojewski@intel.com/
The existing CS35L56 products can make use of the fixup function that
works out the component binding details so we can remove the fixed
configuration fixup functions.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240819123736.111946-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Pavilion Plus 14-ey0xxx needs existing quirk
ALC245_FIXUP_HP_X360_MUTE_LEDS to enable its mute/micmute LEDs.
Signed-off-by: John Sweeney <john.sweeney@runbox.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/E1sfhrD-0007TA-HC@rmmprod05.runbox
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from spi_device_id table.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815091312.757139-1-liuyuntao12@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The data conversion is done rather by a wrong function. We convert to
BE32, not from BE32. Although the end result must be same, this was
complained by the compiler.
Fix the code again and align with another similar function
tas2563_apply_calib() that does already right.
Fixes: 3beddef84d ("ALSA: hda/tas2781: fix wrong calibrated data order")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141630.DiDUB8Z4-lkp@intel.com/
Link: https://patch.msgid.link/20240814100500.1944-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver doesn't create any ALSA controls for firmware controls, so it
shouldn't be calling hda_cs_dsp_control_remove().
commit 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls for
firmware coefficients") removed the call to hda_cs_dsp_add_controls() but
didn't remove the call for destroying those controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls for firmware coefficients")
Link: https://patch.msgid.link/20240813113209.648-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver doesn't create any ALSA controls for firmware controls, so it
shouldn't be calling hda_cs_dsp_control_remove().
commit 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls for
firmware coefficients") removed the call to hda_cs_dsp_add_controls() but
didn't remove the call for destroying those controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls for firmware coefficients")
Link: https://patch.msgid.link/20240813110750.2814-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Wrong calibration data order cause sound too low in some device.
Fix wrong calibrated data order, add calibration data converssion
by get_unaligned_be32() after reading from UEFI.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20240813043749.108-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enables the TI TAS2781 amplifier SoC for the ASUS ROG ALLY X.
This is a design change from the original ASUS ROG ALLY, creating the need
for this patch. All other Realtek Codec settings seem to be re-used from
the original ROG ALLY design (on the ROG ALLY X). This patch maintains the
previous settings for the Realtek codec portion, but enables the I2C
binding for the TI TAS2781 amplifier (instead of the Cirrus CS35L41 amp
used on the original ASUS ROG ALLY).
One other requirement must be met for audio to work on the ASUS ROG ALLY X.
A proper firmware file in the correct location with a proper symlink. We
had reached out to TI engineers and confirmed that the firmware found in
the Windows' driver package has a GPL license. Bazzite Github is hosting
this firmware file for now until proper linux-firmware upstreaming can
occur. https://github.com/ublue-os/bazzite
This firmware file should be placed in
/usr/lib/firmware/ti/tas2781/TAS2XXX1EB3.bin with a symlink to it from
/usr/lib/firmware/TAS2XXX1EB3.bin
Co-developed by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Co-developed by: Jan Drogehoff <sentrycraft123@gmail.com>
Signed-off-by: Jan Drogehoff <sentrycraft123@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Richard Alvarez <alvarez.richard@gmail.com>
Tested-by: Miles Montierth <cyber_dopamine@intheblackmedia.com>
Signed-off-by: Jonathan LoBue <jlobue10@gmail.com>
Link: https://patch.msgid.link/20240812045325.47736-1-jlobue10@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of these laptop models have quirk IDs that are identical but have
different amplifier parts fitted, this difference is described in the
ACPI information.
The solution introduced for this product family can derive the required
component binding information from ACPI instead of hardcoding it,
supports the new variants of the CS35L56 being used and has generalized
naming that makes it applicable to other ALC+amp combinations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802152215.20831-4-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix noise from speakers connected to AUX port when no sound is playing.
The problem occurs because the `alc_shutup_pins` function includes
a 0x10ec0257 vendor ID, which causes noise on Lenovo IdeaPad 3 15IAU7 with
Realtek ALC257 codec when no sound is playing.
Removing this vendor ID from the function fixes the bug.
Fixes: 70794b9563 ("ALSA: hda/realtek: Add more codec ID to no shutup pins list")
Signed-off-by: Parsa Poorshikhian <parsa.poorsh@gmail.com>
Link: https://patch.msgid.link/20240810150939.330693-1-parsa.poorsh@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current MIDI input flush on HDSP and HDSPM drivers relies on the
hardware reporting the right value. If the hardware doesn't give the
proper value but returns -1, it may be stuck at an infinite loop.
Add a counter and break if the loop is unexpectedly too long.
Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size.
Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The debug prints with a special macro snd_printddd() are replaced with
the conditional pr_debug(). Unfortunately dev_dbg() can't be applied
well due to the lack of the reference to the device pointer.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-53-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-43-tiwai@suse.de